From cb87ea28ed9e75a41eb456bfcb547b4e6f10e750 Mon Sep 17 00:00:00 2001 From: John Calixto Date: Tue, 26 Apr 2011 18:56:29 -0400 Subject: mmc: core: Add mmc CMD+ACMD passthrough ioctl Allows appropriately-privileged applications to send CMD (normal) and ACMD (application-specific; preceded with CMD55) commands to cards/devices on the mmc bus. This is primarily useful for enabling the security functionality built in to every SD card. It can also be used as a generic passthrough (e.g. to enable virtual machines to control mmc bus devices directly). However, this use case has not been tested rigorously. Generic passthrough testing was only conducted for a few non-security opcodes to prove the feasibility of the passthrough. Since any opcode can be sent using this passthrough, it is very possible to render the card/device unusable. Applications that use this ioctl must have CAP_SYS_RAWIO. Security commands tested on TI PCIxx12 (SDHCI), Sigma Designs SMP8652 SoC, TI OMAP3621/OMAP3630 SoC, Samsung S5PC110 SoC, Qualcomm MSM7200A SoC. Signed-off-by: John Calixto Reviewed-by: Andrei Warkentin Reviewed-by: Arnd Bergmann Signed-off-by: Chris Ball --- Documentation/ioctl/ioctl-number.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/ioctl') diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index a0a5d82b6b0b..2a34d822e6d6 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -304,6 +304,7 @@ Code Seq#(hex) Include File Comments 0xB0 all RATIO devices in development: 0xB1 00-1F PPPoX +0xB3 00 linux/mmc/ioctl.h 0xC0 00-0F linux/usb/iowarrior.h 0xCB 00-1F CBM serial IEC bus in development: -- cgit v1.2.3