From 8a49f9db47af69f736dc119c5dbd20227abd22ff Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 18 Nov 2018 22:23:53 +0100 Subject: dt-bindings: vendor-prefix: add prefix for IC Plus Corp. IC Plus Corp. has various Ethernet related products such as Ethernet transceivers, Ethernet controllers, Ethernet switches, etc. Signed-off-by: Martin Blumenstingl Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 4b1a2a8fcc16..cc6b2c0d3b49 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -170,6 +170,7 @@ holtek Holtek Semiconductor, Inc. hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) +icplus IC Plus Corp. idt Integrated Device Technologies, Inc. ifi Ingenieurburo Fur Ic-Technologie (I/F/I) ilitek ILI Technology Corporation (ILITEK) -- cgit v1.2.3 From fdc13a9effd5359ae00705708c8c846b1cb2b69c Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 18 Nov 2018 22:23:54 +0100 Subject: dt-bindings: net: phy: add bindings for the IC Plus Corp. IP101A/G PHYs The IP101A and IP101G series both have various models. Depending on the board implementation we need a special property for the IP101GR (32-pin LQFP package) PHY: pin 21 ("RXER/INTR_32") outputs the "receive error" signal by default (LOW means "normal operation", HIGH means that there's either a decoding error of the received signal or that the PHY is receiving LPI). This pin can also be switched to INTR32 mode, where the interrupt signal is routed to this pin. The other PHYs don't need this special handling because they have more pins available so the interrupt function gets a dedicated pin. This adds two properties to either select the "receive error" or "interrupt" function of pin 21. Not specifying any function means that the default set by the bootloader is used. This is required because the IP101GR cannot be differentiated between other IP101 PHYs as the PHY identification registers on all of these is 0x02430c54. The IP101G (sold as die only, without package) may suffer from the same issue depending on how it's integrated into a multi chip package by another manufacturer. If only the RXER/INTR_32 pin is routed then the users of the die-only variant may also have to explicitly configure the mode of hte RXER/INTR_32 pin. This is the reason why no "is-ip101gr" property was added. I have no evidence though which would confirm this theory - so the binding itself is independent of that. Signed-off-by: Martin Blumenstingl Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- .../devicetree/bindings/net/icplus-ip101ag.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/icplus-ip101ag.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/icplus-ip101ag.txt b/Documentation/devicetree/bindings/net/icplus-ip101ag.txt new file mode 100644 index 000000000000..a784592bbb15 --- /dev/null +++ b/Documentation/devicetree/bindings/net/icplus-ip101ag.txt @@ -0,0 +1,19 @@ +IC Plus Corp. IP101A / IP101G Ethernet PHYs + +There are different models of the IP101G Ethernet PHY: +- IP101GR (32-pin QFN package) +- IP101G (die only, no package) +- IP101GA (48-pin LQFP package) + +There are different models of the IP101A Ethernet PHY (which is the +predecessor of the IP101G): +- IP101A (48-pin LQFP package) +- IP101AH (48-pin LQFP package) + +Optional properties for the IP101GR (32-pin QFN package): + +- icplus,select-rx-error: + pin 21 ("RXER/INTR_32") will output the receive error status. + interrupts are not routed outside the PHY in this mode. +- icplus,select-interrupt: + pin 21 ("RXER/INTR_32") will output the interrupt signal. -- cgit v1.2.3 From c5435adc3d2981bbf608a5fa8de1cf2d0d2f2ef9 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Fri, 12 Oct 2018 09:55:09 +0530 Subject: dt-bindings: can: xilinx_can: add Xilinx CAN FD 2.0 bindings Add compatible string and new attributes to support the Xilinx CAN FD 2.0. Signed-off-by: Shubhrajyoti Datta Reviewed-by: Rob Herring Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/xilinx_can.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt index 060e2d46bad9..100cc40b8510 100644 --- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt +++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt @@ -6,6 +6,7 @@ Required properties: - "xlnx,zynq-can-1.0" for Zynq CAN controllers - "xlnx,axi-can-1.00.a" for Axi CAN controllers - "xlnx,canfd-1.0" for CAN FD controllers + - "xlnx,canfd-2.0" for CAN FD 2.0 controllers - reg : Physical base address and size of the controller registers map. - interrupts : Property with a value describing the interrupt -- cgit v1.2.3 From b9c9c39e3d20666c80f64e931ccf4c5684c525ba Mon Sep 17 00:00:00 2001 From: Aisheng Dong Date: Fri, 23 Nov 2018 08:35:29 +0000 Subject: dt-bindings: can: flexcan: add stop mode property to device tree The FlexCAN controller can parse the stop mode property to enable CAN self wakeup feature. Signed-off-by: Aisheng Dong Signed-off-by: Joakim Zhang Reviewed-by: Rob Herring Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index bfc0c433654f..bc77477c6878 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -24,6 +24,14 @@ Optional properties: if this property is present then controller is assumed to be big endian. +- fsl,stop-mode: register bits of stop mode control, the format is + <&gpr req_gpr req_bit ack_gpr ack_bit>. + gpr is the phandle to general purpose register node. + req_gpr is the gpr register offset of CAN stop request. + req_bit is the bit offset of CAN stop request. + ack_gpr is the gpr register offset of CAN stop acknowledge. + ack_bit is the bit offset of CAN stop acknowledge. + Example: can@1c000 { -- cgit v1.2.3 From b255e500c8dc111dd9efac1442a85a0dac913feb Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 3 Dec 2018 17:43:28 -0800 Subject: net: documentation: build a directory structure for drivers Documentation/networking/ is full of cryptically named files with driver documentation. This makes finding interesting information at a glance really hard. Move all those files into a directory called device_drivers (since not all drivers are for device) and fix up references. RFC v0.1 -> RFC v1: - also add .txt suffix to the files which are missing it (Quentin) Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: David Ahern Acked-by: Henrik Austad Signed-off-by: David S. Miller --- .../devicetree/bindings/misc/fsl,qoriq-mc.txt | 2 +- Documentation/networking/3c509.txt | 213 ------ Documentation/networking/LICENSE.qla3xxx | 46 -- Documentation/networking/LICENSE.qlcnic | 288 -------- Documentation/networking/LICENSE.qlge | 288 -------- Documentation/networking/README.ipw2100 | 293 -------- Documentation/networking/README.ipw2200 | 472 ------------- Documentation/networking/README.sb1000 | 207 ------ Documentation/networking/cs89x0.txt | 624 ----------------- Documentation/networking/cxgb.txt | 352 ---------- Documentation/networking/de4x5.txt | 178 ----- .../networking/device_drivers/3com/3c509.txt | 213 ++++++ .../networking/device_drivers/3com/vortex.txt | 448 ++++++++++++ .../networking/device_drivers/amazon/ena.txt | 305 ++++++++ .../networking/device_drivers/chelsio/cxgb.txt | 352 ++++++++++ .../networking/device_drivers/cirrus/cs89x0.txt | 624 +++++++++++++++++ .../networking/device_drivers/davicom/dm9000.txt | 167 +++++ .../networking/device_drivers/dec/de4x5.txt | 178 +++++ .../networking/device_drivers/dec/dmfe.txt | 66 ++ .../networking/device_drivers/dlink/dl2k.txt | 282 ++++++++ .../networking/device_drivers/freescale/dpaa.txt | 260 +++++++ .../device_drivers/freescale/dpaa2/dpio-driver.rst | 158 +++++ .../freescale/dpaa2/ethernet-driver.rst | 185 +++++ .../device_drivers/freescale/dpaa2/index.rst | 10 + .../device_drivers/freescale/dpaa2/overview.rst | 405 +++++++++++ .../device_drivers/freescale/gianfar.txt | 42 ++ .../networking/device_drivers/intel/e100.rst | 187 +++++ .../networking/device_drivers/intel/e1000.rst | 462 +++++++++++++ .../networking/device_drivers/intel/e1000e.rst | 382 ++++++++++ .../networking/device_drivers/intel/fm10k.rst | 141 ++++ .../networking/device_drivers/intel/i40e.rst | 770 +++++++++++++++++++++ .../networking/device_drivers/intel/iavf.rst | 281 ++++++++ .../networking/device_drivers/intel/ice.rst | 45 ++ .../networking/device_drivers/intel/igb.rst | 193 ++++++ .../networking/device_drivers/intel/igbvf.rst | 64 ++ .../networking/device_drivers/intel/ipw2100.txt | 293 ++++++++ .../networking/device_drivers/intel/ipw2200.txt | 472 +++++++++++++ .../networking/device_drivers/intel/ixgb.rst | 467 +++++++++++++ .../networking/device_drivers/intel/ixgbe.rst | 540 +++++++++++++++ .../networking/device_drivers/intel/ixgbevf.rst | 66 ++ .../networking/device_drivers/microsoft/netvsc.txt | 84 +++ .../networking/device_drivers/neterion/s2io.txt | 141 ++++ .../networking/device_drivers/neterion/vxge.txt | 93 +++ .../device_drivers/qlogic/LICENSE.qla3xxx | 46 ++ .../device_drivers/qlogic/LICENSE.qlcnic | 288 ++++++++ .../networking/device_drivers/qlogic/LICENSE.qlge | 288 ++++++++ .../networking/device_drivers/qualcomm/rmnet.txt | 82 +++ Documentation/networking/device_drivers/sb1000.txt | 207 ++++++ .../networking/device_drivers/smsc/smc9.txt | 42 ++ .../networking/device_drivers/stmicro/stmmac.txt | 401 +++++++++++ .../networking/device_drivers/ti/cpsw.txt | 541 +++++++++++++++ .../networking/device_drivers/ti/tlan.txt | 117 ++++ .../device_drivers/toshiba/spider_net.txt | 204 ++++++ Documentation/networking/dl2k.txt | 282 -------- Documentation/networking/dm9000.txt | 167 ----- Documentation/networking/dmfe.txt | 66 -- Documentation/networking/dpaa.txt | 260 ------- Documentation/networking/dpaa2/dpio-driver.rst | 158 ----- Documentation/networking/dpaa2/ethernet-driver.rst | 185 ----- Documentation/networking/dpaa2/index.rst | 10 - Documentation/networking/dpaa2/overview.rst | 405 ----------- Documentation/networking/e100.rst | 187 ----- Documentation/networking/e1000.rst | 462 ------------- Documentation/networking/e1000e.rst | 382 ---------- Documentation/networking/ena.txt | 305 -------- Documentation/networking/fm10k.rst | 141 ---- Documentation/networking/gianfar.txt | 42 -- Documentation/networking/i40e.rst | 770 --------------------- Documentation/networking/iavf.rst | 281 -------- Documentation/networking/ice.rst | 45 -- Documentation/networking/igb.rst | 193 ------ Documentation/networking/igbvf.rst | 64 -- Documentation/networking/ixgb.rst | 467 ------------- Documentation/networking/ixgbe.rst | 540 --------------- Documentation/networking/ixgbevf.rst | 66 -- Documentation/networking/netvsc.txt | 84 --- Documentation/networking/rmnet.txt | 82 --- Documentation/networking/s2io.txt | 141 ---- Documentation/networking/smc9.txt | 42 -- Documentation/networking/spider_net.txt | 204 ------ Documentation/networking/stmmac.txt | 401 ----------- Documentation/networking/ti-cpsw.txt | 541 --------------- Documentation/networking/tlan.txt | 117 ---- Documentation/networking/vortex.txt | 448 ------------ Documentation/networking/vxge.txt | 93 --- MAINTAINERS | 48 +- drivers/net/Kconfig | 8 +- drivers/net/ethernet/3com/3c59x.c | 4 +- drivers/net/ethernet/3com/Kconfig | 5 +- drivers/net/ethernet/chelsio/Kconfig | 3 +- drivers/net/ethernet/cirrus/Kconfig | 2 +- drivers/net/ethernet/dec/tulip/Kconfig | 4 +- drivers/net/ethernet/dlink/dl2k.c | 2 +- drivers/net/ethernet/intel/Kconfig | 24 +- drivers/net/ethernet/neterion/Kconfig | 4 +- drivers/net/ethernet/smsc/Kconfig | 4 +- drivers/net/ethernet/ti/Kconfig | 3 +- drivers/net/ethernet/ti/tlan.c | 4 +- drivers/net/wireless/intel/ipw2x00/Kconfig | 10 +- drivers/net/wireless/intel/ipw2x00/ipw2100.c | 2 +- 100 files changed, 10659 insertions(+), 10654 deletions(-) delete mode 100644 Documentation/networking/3c509.txt delete mode 100644 Documentation/networking/LICENSE.qla3xxx delete mode 100644 Documentation/networking/LICENSE.qlcnic delete mode 100644 Documentation/networking/LICENSE.qlge delete mode 100644 Documentation/networking/README.ipw2100 delete mode 100644 Documentation/networking/README.ipw2200 delete mode 100644 Documentation/networking/README.sb1000 delete mode 100644 Documentation/networking/cs89x0.txt delete mode 100644 Documentation/networking/cxgb.txt delete mode 100644 Documentation/networking/de4x5.txt create mode 100644 Documentation/networking/device_drivers/3com/3c509.txt create mode 100644 Documentation/networking/device_drivers/3com/vortex.txt create mode 100644 Documentation/networking/device_drivers/amazon/ena.txt create mode 100644 Documentation/networking/device_drivers/chelsio/cxgb.txt create mode 100644 Documentation/networking/device_drivers/cirrus/cs89x0.txt create mode 100644 Documentation/networking/device_drivers/davicom/dm9000.txt create mode 100644 Documentation/networking/device_drivers/dec/de4x5.txt create mode 100644 Documentation/networking/device_drivers/dec/dmfe.txt create mode 100644 Documentation/networking/device_drivers/dlink/dl2k.txt create mode 100644 Documentation/networking/device_drivers/freescale/dpaa.txt create mode 100644 Documentation/networking/device_drivers/freescale/dpaa2/dpio-driver.rst create mode 100644 Documentation/networking/device_drivers/freescale/dpaa2/ethernet-driver.rst create mode 100644 Documentation/networking/device_drivers/freescale/dpaa2/index.rst create mode 100644 Documentation/networking/device_drivers/freescale/dpaa2/overview.rst create mode 100644 Documentation/networking/device_drivers/freescale/gianfar.txt create mode 100644 Documentation/networking/device_drivers/intel/e100.rst create mode 100644 Documentation/networking/device_drivers/intel/e1000.rst create mode 100644 Documentation/networking/device_drivers/intel/e1000e.rst create mode 100644 Documentation/networking/device_drivers/intel/fm10k.rst create mode 100644 Documentation/networking/device_drivers/intel/i40e.rst create mode 100644 Documentation/networking/device_drivers/intel/iavf.rst create mode 100644 Documentation/networking/device_drivers/intel/ice.rst create mode 100644 Documentation/networking/device_drivers/intel/igb.rst create mode 100644 Documentation/networking/device_drivers/intel/igbvf.rst create mode 100644 Documentation/networking/device_drivers/intel/ipw2100.txt create mode 100644 Documentation/networking/device_drivers/intel/ipw2200.txt create mode 100644 Documentation/networking/device_drivers/intel/ixgb.rst create mode 100644 Documentation/networking/device_drivers/intel/ixgbe.rst create mode 100644 Documentation/networking/device_drivers/intel/ixgbevf.rst create mode 100644 Documentation/networking/device_drivers/microsoft/netvsc.txt create mode 100644 Documentation/networking/device_drivers/neterion/s2io.txt create mode 100644 Documentation/networking/device_drivers/neterion/vxge.txt create mode 100644 Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx create mode 100644 Documentation/networking/device_drivers/qlogic/LICENSE.qlcnic create mode 100644 Documentation/networking/device_drivers/qlogic/LICENSE.qlge create mode 100644 Documentation/networking/device_drivers/qualcomm/rmnet.txt create mode 100644 Documentation/networking/device_drivers/sb1000.txt create mode 100644 Documentation/networking/device_drivers/smsc/smc9.txt create mode 100644 Documentation/networking/device_drivers/stmicro/stmmac.txt create mode 100644 Documentation/networking/device_drivers/ti/cpsw.txt create mode 100644 Documentation/networking/device_drivers/ti/tlan.txt create mode 100644 Documentation/networking/device_drivers/toshiba/spider_net.txt delete mode 100644 Documentation/networking/dl2k.txt delete mode 100644 Documentation/networking/dm9000.txt delete mode 100644 Documentation/networking/dmfe.txt delete mode 100644 Documentation/networking/dpaa.txt delete mode 100644 Documentation/networking/dpaa2/dpio-driver.rst delete mode 100644 Documentation/networking/dpaa2/ethernet-driver.rst delete mode 100644 Documentation/networking/dpaa2/index.rst delete mode 100644 Documentation/networking/dpaa2/overview.rst delete mode 100644 Documentation/networking/e100.rst delete mode 100644 Documentation/networking/e1000.rst delete mode 100644 Documentation/networking/e1000e.rst delete mode 100644 Documentation/networking/ena.txt delete mode 100644 Documentation/networking/fm10k.rst delete mode 100644 Documentation/networking/gianfar.txt delete mode 100644 Documentation/networking/i40e.rst delete mode 100644 Documentation/networking/iavf.rst delete mode 100644 Documentation/networking/ice.rst delete mode 100644 Documentation/networking/igb.rst delete mode 100644 Documentation/networking/igbvf.rst delete mode 100644 Documentation/networking/ixgb.rst delete mode 100644 Documentation/networking/ixgbe.rst delete mode 100644 Documentation/networking/ixgbevf.rst delete mode 100644 Documentation/networking/netvsc.txt delete mode 100644 Documentation/networking/rmnet.txt delete mode 100644 Documentation/networking/s2io.txt delete mode 100644 Documentation/networking/smc9.txt delete mode 100644 Documentation/networking/spider_net.txt delete mode 100644 Documentation/networking/stmmac.txt delete mode 100644 Documentation/networking/ti-cpsw.txt delete mode 100644 Documentation/networking/tlan.txt delete mode 100644 Documentation/networking/vortex.txt delete mode 100644 Documentation/networking/vxge.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt index 01fdc33a41d0..bb7e896cb644 100644 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt @@ -10,7 +10,7 @@ such as network interfaces, crypto accelerator instances, L2 switches, etc. For an overview of the DPAA2 architecture and fsl-mc bus see: -Documentation/networking/dpaa2/overview.rst +Documentation/networking/device_drivers/freescale/dpaa2/overview.rst As described in the above overview, all DPAA2 objects in a DPRC share the same hardware "isolation context" and a 10-bit value called an ICID diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/3c509.txt deleted file mode 100644 index fbf722e15ac3..000000000000 --- a/Documentation/networking/3c509.txt +++ /dev/null @@ -1,213 +0,0 @@ -Linux and the 3Com EtherLink III Series Ethercards (driver v1.18c and higher) ----------------------------------------------------------------------------- - -This file contains the instructions and caveats for v1.18c and higher versions -of the 3c509 driver. You should not use the driver without reading this file. - -release 1.0 -28 February 2002 -Current maintainer (corrections to): - David Ruggiero - ----------------------------------------------------------------------------- - -(0) Introduction - -The following are notes and information on using the 3Com EtherLink III series -ethercards in Linux. These cards are commonly known by the most widely-used -card's 3Com model number, 3c509. They are all 10mb/s ISA-bus cards and shouldn't -be (but sometimes are) confused with the similarly-numbered PCI-bus "3c905" -(aka "Vortex" or "Boomerang") series. Kernel support for the 3c509 family is -provided by the module 3c509.c, which has code to support all of the following -models: - - 3c509 (original ISA card) - 3c509B (later revision of the ISA card; supports full-duplex) - 3c589 (PCMCIA) - 3c589B (later revision of the 3c589; supports full-duplex) - 3c579 (EISA) - -Large portions of this documentation were heavily borrowed from the guide -written the original author of the 3c509 driver, Donald Becker. The master -copy of that document, which contains notes on older versions of the driver, -currently resides on Scyld web server: http://www.scyld.com/. - - -(1) Special Driver Features - -Overriding card settings - -The driver allows boot- or load-time overriding of the card's detected IOADDR, -IRQ, and transceiver settings, although this capability shouldn't generally be -needed except to enable full-duplex mode (see below). An example of the syntax -for LILO parameters for doing this: - - ether=10,0x310,3,0x3c509,eth0 - -This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and -transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts -with other card types when overriding the I/O address. When the driver is -loaded as a module, only the IRQ may be overridden. For example, -setting two cards to IRQ10 and IRQ11 is done by using the irq module -option: - - options 3c509 irq=10,11 - - -(2) Full-duplex mode - -The v1.18c driver added support for the 3c509B's full-duplex capabilities. -In order to enable and successfully use full-duplex mode, three conditions -must be met: - -(a) You must have a Etherlink III card model whose hardware supports full- -duplex operations. Currently, the only members of the 3c509 family that are -positively known to support full-duplex are the 3c509B (ISA bus) and 3c589B -(PCMCIA) cards. Cards without the "B" model designation do *not* support -full-duplex mode; these include the original 3c509 (no "B"), the original -3c589, the 3c529 (MCA bus), and the 3c579 (EISA bus). - -(b) You must be using your card's 10baseT transceiver (i.e., the RJ-45 -connector), not its AUI (thick-net) or 10base2 (thin-net/coax) interfaces. -AUI and 10base2 network cabling is physically incapable of full-duplex -operation. - -(c) Most importantly, your 3c509B must be connected to a link partner that is -itself full-duplex capable. This is almost certainly one of two things: a full- -duplex-capable Ethernet switch (*not* a hub), or a full-duplex-capable NIC on -another system that's connected directly to the 3c509B via a crossover cable. - -Full-duplex mode can be enabled using 'ethtool'. - -/////Extremely important caution concerning full-duplex mode///// -Understand that the 3c509B's hardware's full-duplex support is much more -limited than that provide by more modern network interface cards. Although -at the physical layer of the network it fully supports full-duplex operation, -the card was designed before the current Ethernet auto-negotiation (N-way) -spec was written. This means that the 3c509B family ***cannot and will not -auto-negotiate a full-duplex connection with its link partner under any -circumstances, no matter how it is initialized***. If the full-duplex mode -of the 3c509B is enabled, its link partner will very likely need to be -independently _forced_ into full-duplex mode as well; otherwise various nasty -failures will occur - at the very least, you'll see massive numbers of packet -collisions. This is one of very rare circumstances where disabling auto- -negotiation and forcing the duplex mode of a network interface card or switch -would ever be necessary or desirable. - - -(3) Available Transceiver Types - -For versions of the driver v1.18c and above, the available transceiver types are: - -0 transceiver type from EEPROM config (normally 10baseT); force half-duplex -1 AUI (thick-net / DB15 connector) -2 (undefined) -3 10base2 (thin-net == coax / BNC connector) -4 10baseT (RJ-45 connector); force half-duplex mode -8 transceiver type and duplex mode taken from card's EEPROM config settings -12 10baseT (RJ-45 connector); force full-duplex mode - -Prior to driver version 1.18c, only transceiver codes 0-4 were supported. Note -that the new transceiver codes 8 and 12 are the *only* ones that will enable -full-duplex mode, no matter what the card's detected EEPROM settings might be. -This insured that merely upgrading the driver from an earlier version would -never automatically enable full-duplex mode in an existing installation; -it must always be explicitly enabled via one of these code in order to be -activated. - -The transceiver type can be changed using 'ethtool'. - - -(4a) Interpretation of error messages and common problems - -Error Messages - -eth0: Infinite loop in interrupt, status 2011. -These are "mostly harmless" message indicating that the driver had too much -work during that interrupt cycle. With a status of 0x2011 you are receiving -packets faster than they can be removed from the card. This should be rare -or impossible in normal operation. Possible causes of this error report are: - - - a "green" mode enabled that slows the processor down when there is no - keyboard activity. - - - some other device or device driver hogging the bus or disabling interrupts. - Check /proc/interrupts for excessive interrupt counts. The timer tick - interrupt should always be incrementing faster than the others. - -No received packets -If a 3c509, 3c562 or 3c589 can successfully transmit packets, but never -receives packets (as reported by /proc/net/dev or 'ifconfig') you likely -have an interrupt line problem. Check /proc/interrupts to verify that the -card is actually generating interrupts. If the interrupt count is not -increasing you likely have a physical conflict with two devices trying to -use the same ISA IRQ line. The common conflict is with a sound card on IRQ10 -or IRQ5, and the easiest solution is to move the 3c509 to a different -interrupt line. If the device is receiving packets but 'ping' doesn't work, -you have a routing problem. - -Tx Carrier Errors Reported in /proc/net/dev -If an EtherLink III appears to transmit packets, but the "Tx carrier errors" -field in /proc/net/dev increments as quickly as the Tx packet count, you -likely have an unterminated network or the incorrect media transceiver selected. - -3c509B card is not detected on machines with an ISA PnP BIOS. -While the updated driver works with most PnP BIOS programs, it does not work -with all. This can be fixed by disabling PnP support using the 3Com-supplied -setup program. - -3c509 card is not detected on overclocked machines -Increase the delay time in id_read_eeprom() from the current value, 500, -to an absurdly high value, such as 5000. - - -(4b) Decoding Status and Error Messages - -The bits in the main status register are: - -value description -0x01 Interrupt latch -0x02 Tx overrun, or Rx underrun -0x04 Tx complete -0x08 Tx FIFO room available -0x10 A complete Rx packet has arrived -0x20 A Rx packet has started to arrive -0x40 The driver has requested an interrupt -0x80 Statistics counter nearly full - -The bits in the transmit (Tx) status word are: - -value description -0x02 Out-of-window collision. -0x04 Status stack overflow (normally impossible). -0x08 16 collisions. -0x10 Tx underrun (not enough PCI bus bandwidth). -0x20 Tx jabber. -0x40 Tx interrupt requested. -0x80 Status is valid (this should always be set). - - -When a transmit error occurs the driver produces a status message such as - - eth0: Transmit error, Tx status register 82 - -The two values typically seen here are: - -0x82 -Out of window collision. This typically occurs when some other Ethernet -host is incorrectly set to full duplex on a half duplex network. - -0x88 -16 collisions. This typically occurs when the network is exceptionally busy -or when another host doesn't correctly back off after a collision. If this -error is mixed with 0x82 errors it is the result of a host incorrectly set -to full duplex (see above). - -Both of these errors are the result of network problems that should be -corrected. They do not represent driver malfunction. - - -(5) Revision history (this file) - -28Feb02 v1.0 DR New; major portions based on Becker original 3c509 docs - diff --git a/Documentation/networking/LICENSE.qla3xxx b/Documentation/networking/LICENSE.qla3xxx deleted file mode 100644 index 2f2077e34d81..000000000000 --- a/Documentation/networking/LICENSE.qla3xxx +++ /dev/null @@ -1,46 +0,0 @@ -Copyright (c) 2003-2006 QLogic Corporation -QLogic Linux Networking HBA Driver - -This program includes a device driver for Linux 2.6 that may be -distributed with QLogic hardware specific firmware binary file. -You may modify and redistribute the device driver code under the -GNU General Public License as published by the Free Software -Foundation (version 2 or a later version). - -You may redistribute the hardware specific firmware binary file -under the following terms: - - 1. Redistribution of source code (only if applicable), - must retain the above copyright notice, this list of - conditions and the following disclaimer. - - 2. Redistribution in binary form must reproduce the above - copyright notice, this list of conditions and the - following disclaimer in the documentation and/or other - materials provided with the distribution. - - 3. The name of QLogic Corporation may not be used to - endorse or promote products derived from this software - without specific prior written permission - -REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, -THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY -EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT -CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR -OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, -TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN -ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN -COMBINATION WITH THIS PROGRAM. - diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/LICENSE.qlcnic deleted file mode 100644 index 2ae3b64983ab..000000000000 --- a/Documentation/networking/LICENSE.qlcnic +++ /dev/null @@ -1,288 +0,0 @@ -Copyright (c) 2009-2013 QLogic Corporation -QLogic Linux qlcnic NIC Driver - -You may modify and redistribute the device driver code under the -GNU General Public License (a copy of which is attached hereto as -Exhibit A) published by the Free Software Foundation (version 2). - - -EXHIBIT A - - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. diff --git a/Documentation/networking/LICENSE.qlge b/Documentation/networking/LICENSE.qlge deleted file mode 100644 index ce64e4d15b21..000000000000 --- a/Documentation/networking/LICENSE.qlge +++ /dev/null @@ -1,288 +0,0 @@ -Copyright (c) 2003-2011 QLogic Corporation -QLogic Linux qlge NIC Driver - -You may modify and redistribute the device driver code under the -GNU General Public License (a copy of which is attached hereto as -Exhibit A) published by the Free Software Foundation (version 2). - - -EXHIBIT A - - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. diff --git a/Documentation/networking/README.ipw2100 b/Documentation/networking/README.ipw2100 deleted file mode 100644 index 6f85e1d06031..000000000000 --- a/Documentation/networking/README.ipw2100 +++ /dev/null @@ -1,293 +0,0 @@ - -Intel(R) PRO/Wireless 2100 Driver for Linux in support of: - -Intel(R) PRO/Wireless 2100 Network Connection - -Copyright (C) 2003-2006, Intel Corporation - -README.ipw2100 - -Version: git-1.1.5 -Date : January 25, 2006 - -Index ------------------------------------------------ -0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER -1. Introduction -2. Release git-1.1.5 Current Features -3. Command Line Parameters -4. Sysfs Helper Files -5. Radio Kill Switch -6. Dynamic Firmware -7. Power Management -8. Support -9. License - - -0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER ------------------------------------------------ - -Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! - -Intel wireless LAN adapters are engineered, manufactured, tested, and -quality checked to ensure that they meet all necessary local and -governmental regulatory agency requirements for the regions that they -are designated and/or marked to ship into. Since wireless LANs are -generally unlicensed devices that share spectrum with radars, -satellites, and other licensed and unlicensed devices, it is sometimes -necessary to dynamically detect, avoid, and limit usage to avoid -interference with these devices. In many instances Intel is required to -provide test data to prove regional and local compliance to regional and -governmental regulations before certification or approval to use the -product is granted. Intel's wireless LAN's EEPROM, firmware, and -software driver are designed to carefully control parameters that affect -radio operation and to ensure electromagnetic compliance (EMC). These -parameters include, without limitation, RF power, spectrum usage, -channel scanning, and human exposure. - -For these reasons Intel cannot permit any manipulation by third parties -of the software provided in binary format with the wireless WLAN -adapters (e.g., the EEPROM and firmware). Furthermore, if you use any -patches, utilities, or code with the Intel wireless LAN adapters that -have been manipulated by an unauthorized party (i.e., patches, -utilities, or code (including open source code modifications) which have -not been validated by Intel), (i) you will be solely responsible for -ensuring the regulatory compliance of the products, (ii) Intel will bear -no liability, under any theory of liability for any issues associated -with the modified products, including without limitation, claims under -the warranty and/or issues arising from regulatory non-compliance, and -(iii) Intel will not provide or be required to assist in providing -support to any third parties for such modified products. - -Note: Many regulatory agencies consider Wireless LAN adapters to be -modules, and accordingly, condition system-level regulatory approval -upon receipt and review of test data documenting that the antennas and -system configuration do not cause the EMC and radio operation to be -non-compliant. - -The drivers available for download from SourceForge are provided as a -part of a development project. Conformance to local regulatory -requirements is the responsibility of the individual developer. As -such, if you are interested in deploying or shipping a driver as part of -solution intended to be used for purposes other than development, please -obtain a tested driver from Intel Customer Support at: - -http://www.intel.com/support/wireless/sb/CS-006408.htm - -1. Introduction ------------------------------------------------ - -This document provides a brief overview of the features supported by the -IPW2100 driver project. The main project website, where the latest -development version of the driver can be found, is: - - http://ipw2100.sourceforge.net - -There you can find the not only the latest releases, but also information about -potential fixes and patches, as well as links to the development mailing list -for the driver project. - - -2. Release git-1.1.5 Current Supported Features ------------------------------------------------ -- Managed (BSS) and Ad-Hoc (IBSS) -- WEP (shared key and open) -- Wireless Tools support -- 802.1x (tested with XSupplicant 1.0.1) - -Enabled (but not supported) features: -- Monitor/RFMon mode -- WPA/WPA2 - -The distinction between officially supported and enabled is a reflection -on the amount of validation and interoperability testing that has been -performed on a given feature. - - -3. Command Line Parameters ------------------------------------------------ - -If the driver is built as a module, the following optional parameters are used -by entering them on the command line with the modprobe command using this -syntax: - - modprobe ipw2100 [