From ecef6a9effe49e8e2635c839020b9833b71e934c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 9 Jul 2021 15:02:37 +0200 Subject: libata: fix ata_pio_sector for CONFIG_HIGHMEM Data transfers are not required to be block aligned in memory, so they span two pages. Fix this by splitting the call to >sff_data_xfer into two for that case. This has been broken since the initial libata import before the damn of git, but was uncovered by the legacy ide driver removal. Reported-by: kernel test robot Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de Signed-off-by: Jens Axboe --- drivers/ata/libata-sff.c | 35 +++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index ae7189d1a568..b71ea4a680b0 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -637,6 +637,20 @@ unsigned int ata_sff_data_xfer32(struct ata_queued_cmd *qc, unsigned char *buf, } EXPORT_SYMBOL_GPL(ata_sff_data_xfer32); +static void ata_pio_xfer(struct ata_queued_cmd *qc, struct page *page, + unsigned int offset, size_t xfer_size) +{ + bool do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + unsigned char *buf; + + buf = kmap_atomic(page); + qc->ap->ops->sff_data_xfer(qc, buf + offset, xfer_size, do_write); + kunmap_atomic(buf); + + if (!do_write && !PageSlab(page)) + flush_dcache_page(page); +} + /** * ata_pio_sector - Transfer a sector of data. * @qc: Command on going @@ -648,11 +662,9 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32); */ static void ata_pio_sector(struct ata_queued_cmd *qc) { - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); struct ata_port *ap = qc->ap; struct page *page; unsigned int offset; - unsigned char *buf; if (!qc->cursg) { qc->curbytes = qc->nbytes; @@ -670,13 +682,20 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - /* do the actual data transfer */ - buf = kmap_atomic(page); - ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size, do_write); - kunmap_atomic(buf); + /* + * Split the transfer when it splits a page boundary. Note that the + * split still has to be dword aligned like all ATA data transfers. + */ + WARN_ON_ONCE(offset % 4); + if (offset + qc->sect_size > PAGE_SIZE) { + unsigned int split_len = PAGE_SIZE - offset; - if (!do_write && !PageSlab(page)) - flush_dcache_page(page); + ata_pio_xfer(qc, page, offset, split_len); + ata_pio_xfer(qc, nth_page(page, 1), 0, + qc->sect_size - split_len); + } else { + ata_pio_xfer(qc, page, offset, qc->sect_size); + } qc->curbytes += qc->sect_size; qc->cursg_ofs += qc->sect_size; -- cgit v1.2.3 From 094121ef815f29d9e6a01fafca365831454ce293 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Wed, 28 Jul 2021 20:21:15 +0200 Subject: arch: Kconfig: clean up obsolete use of HAVE_IDE The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is supported. As IDE support and the HAVE_IDE config vanishes with commit b7fb14d3ac63 ("ide: remove the legacy ide driver"), there is no need to mention HAVE_IDE in all those arch-specific Kconfig files. The issue was identified with ./scripts/checkkconfigsymbols.py. Fixes: b7fb14d3ac63 ("ide: remove the legacy ide driver") Suggested-by: Randy Dunlap Signed-off-by: Lukas Bulwahn Acked-by: Randy Dunlap Link: https://lore.kernel.org/r/20210728182115.4401-1-lukas.bulwahn@gmail.com Reviewed-by: Christoph Hellwig Acked-by: Geert Uytterhoeven Signed-off-by: Jens Axboe --- arch/alpha/Kconfig | 1 - arch/arm/Kconfig | 6 ------ arch/arm/mach-davinci/Kconfig | 1 - arch/h8300/Kconfig.cpu | 1 - arch/ia64/Kconfig | 1 - arch/m68k/Kconfig | 1 - arch/mips/Kconfig | 1 - arch/parisc/Kconfig | 1 - arch/powerpc/Kconfig | 1 - arch/sh/Kconfig | 1 - arch/sparc/Kconfig | 1 - arch/x86/Kconfig | 1 - arch/xtensa/Kconfig | 1 - 13 files changed, 18 deletions(-) diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 77d3280dc678..a6d4c2f744e3 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -14,7 +14,6 @@ config ALPHA select PCI_SYSCALL if PCI select HAVE_AOUT select HAVE_ASM_MODVERSIONS - select HAVE_IDE select HAVE_PCSPKR_PLATFORM select HAVE_PERF_EVENTS select NEED_DMA_MAP_STATE diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 06b6187b67af..f2ce83e643e7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -95,7 +95,6 @@ config ARM select HAVE_FUNCTION_TRACER if !XIP_KERNEL select HAVE_GCC_PLUGINS select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7) - select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_IRQ_TIME_ACCOUNTING select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZ4 @@ -361,7 +360,6 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE - select HAVE_IDE select NEED_MACH_IO_H if !MMU select NEED_MACH_MEMORY_H help @@ -429,7 +427,6 @@ config ARCH_PXA select GENERIC_IRQ_MULTI_HANDLER select GPIO_PXA select GPIOLIB - select HAVE_IDE select IRQ_DOMAIN select PLAT_PXA select SPARSE_IRQ @@ -445,7 +442,6 @@ config ARCH_RPC select ARM_HAS_SG_CHAIN select CPU_SA110 select FIQ - select HAVE_IDE select HAVE_PATA_PLATFORM select ISA_DMA_API select LEGACY_TIMER_TICK @@ -468,7 +464,6 @@ config ARCH_SA1100 select CPU_SA1100 select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB - select HAVE_IDE select IRQ_DOMAIN select ISA select NEED_MACH_MEMORY_H @@ -504,7 +499,6 @@ config ARCH_OMAP1 select GENERIC_IRQ_CHIP select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB - select HAVE_IDE select HAVE_LEGACY_CLK select IRQ_DOMAIN select NEED_MACH_IO_H if PCCARD diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index de11030748d0..1d3aef84287d 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -9,7 +9,6 @@ menuconfig ARCH_DAVINCI select PM_GENERIC_DOMAINS_OF if PM && OF select REGMAP_MMIO select RESET_CONTROLLER - select HAVE_IDE select PINCTRL_SINGLE if ARCH_DAVINCI diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu index b5e14d513e62..c30baa0499fc 100644 --- a/arch/h8300/Kconfig.cpu +++ b/arch/h8300/Kconfig.cpu @@ -44,7 +44,6 @@ config H8300_H8MAX bool "H8MAX" select H83069 select RAMKERNEL - select HAVE_IDE help H8MAX Evaluation Board Support More Information. (Japanese Only) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index cf425c2c63af..4993c7ac7ff6 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -25,7 +25,6 @@ config IA64 select HAVE_ASM_MODVERSIONS select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_EXIT_THREAD - select HAVE_IDE select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_FTRACE_MCOUNT_RECORD diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 96989ad46f66..d632a1d576f9 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -23,7 +23,6 @@ config M68K select HAVE_DEBUG_BUGVERBOSE select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_HAS_NO_UNALIGNED select HAVE_FUTEX_CMPXCHG if MMU && FUTEX - select HAVE_IDE select HAVE_MOD_ARCH_SPECIFIC select HAVE_UID16 select MMU_GATHER_NO_RANGE if MMU diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cee6087cd686..6dfb27d531dd 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -71,7 +71,6 @@ config MIPS select HAVE_FUNCTION_TRACER select HAVE_GCC_PLUGINS select HAVE_GENERIC_VDSO - select HAVE_IDE select HAVE_IOREMAP_PROT select HAVE_IRQ_EXIT_ON_IRQ_STACK select HAVE_IRQ_TIME_ACCOUNTING diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index bde9907bc5b2..4f8c1fbf8f2f 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -3,7 +3,6 @@ config PARISC def_bool y select ARCH_32BIT_OFF_T if !64BIT select ARCH_MIGHT_HAVE_PC_PARPORT - select HAVE_IDE select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select HAVE_SYSCALL_TRACEPOINTS diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index d01e3401581d..663766fbf505 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -220,7 +220,6 @@ config PPC select HAVE_HARDLOCKUP_DETECTOR_ARCH if PPC_BOOK3S_64 && SMP select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx) - select HAVE_IDE select HAVE_IOREMAP_PROT select HAVE_IRQ_EXIT_ON_IRQ_STACK select HAVE_IRQ_TIME_ACCOUNTING diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 45a0549421cd..b683b69a4556 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -39,7 +39,6 @@ config SUPERH select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_FTRACE_MCOUNT_RECORD select HAVE_HW_BREAKPOINT - select HAVE_IDE if HAS_IOPORT_MAP select HAVE_IOREMAP_PROT if MMU && !X2TLB select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_GZIP diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index c5fa7932b550..f0c0f955e169 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -19,7 +19,6 @@ config SPARC select OF select OF_PROMTREE select HAVE_ASM_MODVERSIONS - select HAVE_IDE select HAVE_ARCH_KGDB if !SMP || SPARC64 select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_SECCOMP if SPARC64 diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 49270655e827..88fb922c23a0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -202,7 +202,6 @@ config X86 select HAVE_FUNCTION_TRACER select HAVE_GCC_PLUGINS select HAVE_HW_BREAKPOINT - select HAVE_IDE select HAVE_IOREMAP_PROT select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64 select HAVE_IRQ_TIME_ACCOUNTING diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 2332b2156993..3878880469d1 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -327,7 +327,6 @@ config XTENSA_PLATFORM_ISS config XTENSA_PLATFORM_XT2000 bool "XT2000" - select HAVE_IDE help XT2000 is the name of Tensilica's feature-rich emulation platform. This hardware is capable of running a full Linux distribution. -- cgit v1.2.3