From 208d7baf8085ed639ec896274f1679d4718f2ff3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 27 Sep 2013 20:07:26 +0100 Subject: ARM: imx: initial SolidRun HummingBoard support Add support for the SolidRun HummingBoard. This commit adds support for the following interfaces on this board: - Consumer Ir receiver - S/PDIF output - Both USB interfaces - Gigabit Ethernet using AR8035 - UART port Signed-off-by: Russell King --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-hummingboard.dts | 167 +++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 62 +++++++++ arch/arm/boot/dts/imx6qdl-microsom.dtsi | 33 +++++ arch/arm/mach-imx/mach-imx6q.c | 35 ++++++ 5 files changed, 298 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-hummingboard.dts create mode 100644 arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-microsom.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d57c1a65b24f..875af333c6dc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -136,6 +136,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ + imx6dl-hummingboard.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabresd.dtb \ imx6dl-wandboard.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts new file mode 100644 index 000000000000..fd8fc7cd53f3 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -0,0 +1,167 @@ +/* + * Copyright (C) 2013,2014 Russell King + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + model = "SolidRun HummingBoard DL/Solo"; + compatible = "solidrun,hummingboard", "fsl,imx6dl"; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 2 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + codec: spdif-transmitter { + compatible = "linux,spdif-dit"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + /* IMX6 doesn't implement this yet */ + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c1>; + + /* + * Not fitted on Carrier-1 board... yet + status = "okay"; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + */ +}; + +&iomuxc { + hummingboard { + pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 + >; + }; + + pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; + + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_spdif: hummingboard-spdif { + fsl,pins = ; + }; + + pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { + fsl,pins = ; + }; + + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { + fsl,pins = ; + }; + + pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + >; + }; + + pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + }; +}; + +&spdif { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_hummingboard_usdhc2_aux + &pinctrl_hummingboard_usdhc2 + >; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 4 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi new file mode 100644 index 000000000000..a3cb2fff8f61 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2013,2014 Russell King + * + * This describes the hookup for an AR8035 to the iMX6 on the SolidRun + * MicroSOM. + */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; + phy-mode = "rgmii"; + phy-reset-duration = <2>; + phy-reset-gpios = <&gpio4 15 0>; + status = "okay"; +}; + +&iomuxc { + enet { + pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + /* AR8035 reset */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 + /* AR8035 interrupt */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x80000000 + /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 + /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 + /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + + /* + * As the RMII pins are also connected to RGMII + * so that an AR8030 can be placed, set these + * to high-z with the same pulls as above. + * Use the GPIO settings to avoid changing the + * input select registers. + */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi new file mode 100644 index 000000000000..d729d0b15f25 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2013,2014 Russell King + */ + +&iomuxc { + microsom { + pinctrl_microsom_uart1: microsom-uart1 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_microsom_usbotg: microsom-usbotg { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = ; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_uart1>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_usbotg>; +}; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index d0cfb225ec9a..cb6fa3d61243 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -103,6 +103,39 @@ static int ar8031_phy_fixup(struct phy_device *dev) #define PHY_ID_AR8031 0x004dd074 +static int ar8035_phy_fixup(struct phy_device *dev) +{ + u16 val; + + /* Ar803x phy SmartEEE feature cause link status generates glitch, + * which cause ethernet link down/up issue, so disable SmartEEE + */ + phy_write(dev, 0xd, 0x3); + phy_write(dev, 0xe, 0x805d); + phy_write(dev, 0xd, 0x4003); + + val = phy_read(dev, 0xe); + phy_write(dev, 0xe, val & ~(1 << 8)); + + /* + * Enable 125MHz clock from CLK_25M on the AR8031. This + * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad. + * Also, introduce a tx clock delay. + * + * This is the same as is the AR8031 fixup. + */ + ar8031_phy_fixup(dev); + + /*check phy power*/ + val = phy_read(dev, 0x0); + if (val & BMCR_PDOWN) + phy_write(dev, 0x0, val & ~BMCR_PDOWN); + + return 0; +} + +#define PHY_ID_AR8035 0x004dd072 + static void __init imx6q_enet_phy_init(void) { if (IS_BUILTIN(CONFIG_PHYLIB)) { @@ -112,6 +145,8 @@ static void __init imx6q_enet_phy_init(void) ksz9031rn_phy_fixup); phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, ar8031_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef, + ar8035_phy_fixup); } } -- cgit v1.2.3 From 971488f1149f09fd2fad0e7973780b752809b9f6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 Jan 2014 16:12:38 +0000 Subject: ARM: imx: initial SolidRun Cubox-i support Add support for the SolidRun Cubox-i devices. This commit adds similar basic support as the HummingBoard. Further devices will be supported in future patches. Signed-off-by: Russell King --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6dl-cubox-i.dts | 12 +++ arch/arm/boot/dts/imx6q-cubox-i.dts | 16 ++++ arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 143 +++++++++++++++++++++++++++++++++ 4 files changed, 173 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-cubox-i.dts create mode 100644 arch/arm/boot/dts/imx6q-cubox-i.dts create mode 100644 arch/arm/boot/dts/imx6qdl-cubox-i.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 875af333c6dc..1eeae00d9d09 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -136,11 +136,13 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ + imx6dl-cubox-i.dtb \ imx6dl-hummingboard.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabresd.dtb \ imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ + imx6q-cubox-i.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts new file mode 100644 index 000000000000..58aa8f2b0f26 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2014 Russell King + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Solo/DualLite"; + compatible = "solidrun,cubox-i/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts new file mode 100644 index 000000000000..bc5f31e3e892 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2014 Russell King + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Dual/Quad"; + compatible = "solidrun,cubox-i/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi new file mode 100644 index 000000000000..64daa3b311f6 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2014 Russell King + */ +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 9 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_ir>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + codec: spdif-transmitter { + compatible = "linux,spdif-dit"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_spdif>; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + /* IMX6 doesn't implement this yet */ + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_i2c3>; + + status = "okay"; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; +}; + +&iomuxc { + cubox_i { + pinctrl_cubox_i_i2c3: cubox-i-i2c3 { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_cubox_i_ir: cubox-i-ir { + fsl,pins = < + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 + >; + }; + + pinctrl_cubox_i_spdif: cubox-i-spdif { + fsl,pins = ; + }; + + pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { + fsl,pins = ; + }; + + pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { + fsl,pins = ; + }; + + pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 + >; + }; + + pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + }; +}; + +&spdif { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 4 0>; + status = "okay"; +}; -- cgit v1.2.3 From c5ca95b507c8a2a69e49eeda539b41bd76922d7f Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Wed, 18 Dec 2013 23:08:52 +0100 Subject: ARM: 7930/1: Introduce atomic MMIO modify Some SoC have MMIO regions that are shared across orthogonal subsystems. This commit implements a possible solution for the thread-safe access of such regions through a spinlock-protected API. Concurrent access is protected with a single spinlock for the entire MMIO address space. While this protects shared-registers, it also serializes access to unrelated/unshared registers. We add relaxed and non-relaxed variants, by using writel_relaxed and writel, respectively. The rationale for this is that some users may not require register write completion but only thread-safe access to a register. Tested-by: Sebastian Hesselbarth Acked-by: Jason Cooper Acked-by: Catalin Marinas Signed-off-by: Ezequiel Garcia Signed-off-by: Russell King --- arch/arm/include/asm/io.h | 6 ++++++ arch/arm/kernel/io.c | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index fbeb39c869e9..8aa4cca74501 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -37,6 +37,12 @@ #define isa_page_to_bus page_to_phys #define isa_bus_to_virt phys_to_virt +/* + * Atomic MMIO-wide IO modify + */ +extern void atomic_io_modify(void __iomem *reg, u32 mask, u32 set); +extern void atomic_io_modify_relaxed(void __iomem *reg, u32 mask, u32 set); + /* * Generic IO read/write. These perform native-endian accesses. Note * that some architectures will want to re-define __raw_{read,write}w. diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c index dcd5b4d86143..9203cf883330 100644 --- a/arch/arm/kernel/io.c +++ b/arch/arm/kernel/io.c @@ -1,6 +1,41 @@ #include #include #include +#include + +static DEFINE_RAW_SPINLOCK(__io_lock); + +/* + * Generic atomic MMIO modify. + * + * Allows thread-safe access to registers shared by unrelated subsystems. + * The access is protected by a single MMIO-wide lock. + */ +void atomic_io_modify_relaxed(void __iomem *reg, u32 mask, u32 set) +{ + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&__io_lock, flags); + value = readl_relaxed(reg) & ~mask; + value |= (set & mask); + writel_relaxed(value, reg); + raw_spin_unlock_irqrestore(&__io_lock, flags); +} +EXPORT_SYMBOL(atomic_io_modify_relaxed); + +void atomic_io_modify(void __iomem *reg, u32 mask, u32 set) +{ + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&__io_lock, flags); + value = readl_relaxed(reg) & ~mask; + value |= (set & mask); + writel(value, reg); + raw_spin_unlock_irqrestore(&__io_lock, flags); +} +EXPORT_SYMBOL(atomic_io_modify); /* * Copy data from IO memory space to "real" memory space. -- cgit v1.2.3 From f8fe23ec4e89b58e63085ea92348aff3bcca3e14 Mon Sep 17 00:00:00 2001 From: Victor Kamensky Date: Tue, 21 Jan 2014 06:45:11 +0100 Subject: ARM: 7946/1: asm: __und_usr_thumb need byteswap instructions in BE case __und_usr_thumb function deals with thumb2 opcodes. In case of BE image, it needs to byteswap half word thumb2 encoded instructions before further processing them. Without this fix BE image user-land thread executing first VFP instruction encoded in thumb2 fails with SIGILL, because kernel does not recognize instruction and does not enable VFP. Reported-by: Corey Melton Signed-off-by: Victor Kamensky Tested-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index b3fb8c9e1ff2..1879e8dd2acc 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -451,9 +451,11 @@ __und_usr_thumb: .arch armv6t2 #endif 2: ldrht r5, [r4] +ARM_BE8(rev16 r5, r5) @ little endian instruction cmp r5, #0xe800 @ 32bit instruction if xx != 0 blo __und_usr_fault_16 @ 16bit undefined instruction 3: ldrht r0, [r2] +ARM_BE8(rev16 r0, r0) @ little endian instruction add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 str r2, [sp, #S_PC] @ it's a 2x16bit instr, update orr r0, r0, r5, lsl #16 -- cgit v1.2.3 From 2ab4e8c06dc084c1bba8c8edfa1b33424c16d336 Mon Sep 17 00:00:00 2001 From: Christopher Covington Date: Tue, 21 Jan 2014 16:25:34 +0100 Subject: ARM: 7947/1: Make pgtbl macro more robust The pgtbl macro couldn't handle the specific (TEXT_OFFSET - PG_DIR_SIZE) value that the combination of MSM platforms and LPAE created: head.S:163: Error: invalid constant (203000) after fixup Regardless of whether this combination of configuration options will work on currently support platforms at run time, make it at least assemble properly. Signed-off-by: Christopher Covington Reviewed-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/kernel/head.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 32f317e5828a..914616e0bdcd 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -52,7 +52,8 @@ .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE .macro pgtbl, rd, phys - add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE + add \rd, \phys, #TEXT_OFFSET + sub \rd, \rd, #PG_DIR_SIZE .endm /* -- cgit v1.2.3 From 4c235cb9e35407bdb4a2debeef4dc8721e8f91f2 Mon Sep 17 00:00:00 2001 From: Ben Peddell Date: Mon, 13 Jan 2014 23:25:18 +0100 Subject: ARM: 7941/2: Fix incorrect FDT initrd parameter override Commit 65939301acdb (arm: set initrd_start/initrd_end for fdt scan) caused the FDT initrd_start and initrd_end to override the phys_initrd_start and phys_initrd_size set by the initrd= kernel parameter. With this patch initrd_start and initrd_end will be overridden if phys_initrd_start and phys_initrd_size are set by the kernel initrd= parameter. Fixes: 65939301acdb (arm: set initrd_start/initrd_end for fdt scan) Signed-off-by: Ben Peddell Acked-by: Jason Cooper Signed-off-by: Russell King --- arch/arm/mm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 3e8f106ee5fe..ac1d883460c7 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -345,10 +345,11 @@ void __init arm_memblock_init(struct meminfo *mi, #endif #ifdef CONFIG_BLK_DEV_INITRD /* FDT scan will populate initrd_start */ - if (initrd_start) { + if (initrd_start && !phys_initrd_size) { phys_initrd_start = __virt_to_phys(initrd_start); phys_initrd_size = initrd_end - initrd_start; } + initrd_start = initrd_end = 0; if (phys_initrd_size && !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) { pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region - disabling initrd\n", -- cgit v1.2.3 From d326b65c57d64208646206d0bfd4e2d19d6df38c Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 28 Jan 2014 18:31:17 +0000 Subject: ARM: fix building with gcc 4.6.4 GCC fails to build the kernel if EABI is selected, and the default FPU is selected. Avoid this by explicitly stating that we want VFP with EABI. Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c99b1086d83d..04aa55802ae7 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -100,7 +100,7 @@ tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) tune-y := $(tune-y) ifeq ($(CONFIG_AEABI),y) -CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork +CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp else CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) endif -- cgit v1.2.3