From 84b40e3b57eef1417479c00490dd4c9f6e5ffdbc Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Sat, 22 Apr 2017 18:37:19 +0530 Subject: serial: 8250: omap: Disable DMA for console UART Kernel always writes log messages to console via serial8250_console_write()->serial8250_console_putchar() which directly accesses UART_TX register _without_ using DMA. But, if other processes like systemd using same UART port, then these writes are handled by a different code flow using 8250_omap driver where there is provision to use DMA. It seems that it is possible that both DMA and CPU might simultaneously put data to UART FIFO and lead to potential loss of data due to FIFO overflow and weird data corruption. This happens when both kernel console and userspace tries to write simultaneously to the same UART port. Therefore, disable DMA on kernel console port to avoid potential race between CPU and DMA. Signed-off-by: Vignesh R Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index e7e64913a748..d81bac98d190 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -613,6 +613,10 @@ static int omap_8250_startup(struct uart_port *port) up->lsr_saved_flags = 0; up->msr_saved_flags = 0; + /* Disable DMA for console UART */ + if (uart_console(port)) + up->dma = NULL; + if (up->dma) { ret = serial8250_request_dma(up); if (ret) { -- cgit v1.2.3 From 70b2fe355a4cac3488a208ff13defefef45d6f77 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 24 Apr 2017 16:00:30 +0300 Subject: serial: 8250_exar: Remove duplicate assignment UPF_EXAR_EFR is set globally for each port enumerated by the driver. Thus, no need to repeat this in individual ->setup() hook. Signed-off-by: Andy Shevchenko Reviewed-by: Jan Kiszka Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_exar.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 1270ff163f63..2a8f00d96e6b 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -109,7 +109,6 @@ pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev, u8 __iomem *p; int err; - port->port.flags |= UPF_EXAR_EFR; port->port.uartclk = baud * 16; err = default_setup(priv, pcidev, idx, offset, port); -- cgit v1.2.3 From ea5244e2af3b4813bf3d90ba6a6481d1a3c33d15 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 2 May 2017 17:15:42 +0930 Subject: serial: 8250: Add flag so drivers can avoid THRE probe The probing of THRE irq behaviour assumes the other end will be reading bytes out of the buffer in order to probe the port at driver init. In some cases the other end cannot be relied upon to read these bytes, so provide a flag for them to skip this step. Bit 19 was chosen as the flags are a int and the top bits are taken. Acked-by: Benjamin Herrenschmidt Signed-off-by: Joel Stanley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_port.c | 2 +- include/linux/serial_core.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 09a65a3ec7f7..d5b6cee87801 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2229,7 +2229,7 @@ int serial8250_do_startup(struct uart_port *port) } } - if (port->irq) { + if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) { unsigned char iir1; /* * Test for UARTs that do not reassert THRE when the diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 64d892f1e5cd..1775500294bb 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -195,6 +195,7 @@ struct uart_port { #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ ) +#define UPF_NO_THRE_TEST ((__force upf_t) (1 << 19)) /* Port has hardware-assisted h/w flow control */ #define UPF_AUTO_CTS ((__force upf_t) (1 << 20)) #define UPF_AUTO_RTS ((__force upf_t) (1 << 21)) -- cgit v1.2.3 From 7fbcf3afe6e8e180bfc39fb3f41657fa6e4af55c Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 2 May 2017 17:15:43 +0930 Subject: drivers/serial: Add driver for Aspeed virtual UART This change adds a driver for the 16550-based Aspeed virtual UART device. We use a similar process to the of_serial driver for device probe, but expose some VUART-specific functions through sysfs too. The VUART is two UART 'front ends' connected by their FIFO (no actual serial line in between). One is on the BMC side (management controller) and one is on the host CPU side. This driver is for the BMC side. The sysfs files allow the BMC userspace, which owns the system configuration policy, to specify at what IO port and interrupt number the host side will appear to the host on the Host <-> BMC LPC bus. It could be different on a different system (though most of them use 3f8/4). OpenPOWER host firmware doesn't like it when the host-side of the VUART's FIFO is not drained. This driver only disables host TX discard mode when the port is in use. We set the VUART enabled bit when we bind to the device, and clear it on unbind. We don't want to do this on open/release, as the host may be using this bit to configure serial output modes, which is independent of whether the devices has been opened by BMC userspace. Signed-off-by: Jeremy Kerr Signed-off-by: Joel Stanley Acked-by: Rob Herring Reviewed-by: Benjamin Herrenschmidt Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/stable/sysfs-driver-aspeed-vuart | 15 + Documentation/devicetree/bindings/serial/8250.txt | 2 + drivers/tty/serial/8250/8250_aspeed_vuart.c | 323 +++++++++++++++++++++ drivers/tty/serial/8250/Kconfig | 10 + drivers/tty/serial/8250/Makefile | 1 + 5 files changed, 351 insertions(+) create mode 100644 Documentation/ABI/stable/sysfs-driver-aspeed-vuart create mode 100644 drivers/tty/serial/8250/8250_aspeed_vuart.c diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart new file mode 100644 index 000000000000..8062953ce77b --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart @@ -0,0 +1,15 @@ +What: /sys/bus/platform/drivers/aspeed-vuart/*/lpc_address +Date: April 2017 +Contact: Jeremy Kerr +Description: Configures which IO port the host side of the UART + will appear on the host <-> BMC LPC bus. +Users: OpenBMC. Proposed changes should be mailed to + openbmc@lists.ozlabs.org + +What: /sys/bus/platform/drivers/aspeed-vuart*/sirq +Date: April 2017 +Contact: Jeremy Kerr +Description: Configures which interrupt number the host side of + the UART will appear on the host <-> BMC LPC bus. +Users: OpenBMC. Proposed changes should be mailed to + openbmc@lists.ozlabs.org diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 10276a46ecef..656733949309 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -20,6 +20,8 @@ Required properties: - "fsl,16550-FIFO64" - "fsl,ns16550" - "ti,da830-uart" + - "aspeed,ast2400-vuart" + - "aspeed,ast2500-vuart" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c new file mode 100644 index 000000000000..822be4906763 --- /dev/null +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -0,0 +1,323 @@ +/* + * Serial Port driver for Aspeed VUART device + * + * Copyright (C) 2016 Jeremy Kerr , IBM Corp. + * Copyright (C) 2006 Arnd Bergmann , IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define ASPEED_VUART_GCRA 0x20 +#define ASPEED_VUART_GCRA_VUART_EN BIT(0) +#define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5) +#define ASPEED_VUART_GCRB 0x24 +#define ASPEED_VUART_GCRB_HOST_SIRQ_MASK GENMASK(7, 4) +#define ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT 4 +#define ASPEED_VUART_ADDRL 0x28 +#define ASPEED_VUART_ADDRH 0x2c + +struct aspeed_vuart { + struct device *dev; + void __iomem *regs; + struct clk *clk; + int line; +}; + +/* + * The VUART is basically two UART 'front ends' connected by their FIFO + * (no actual serial line in between). One is on the BMC side (management + * controller) and one is on the host CPU side. + * + * It allows the BMC to provide to the host a "UART" that pipes into + * the BMC itself and can then be turned by the BMC into a network console + * of some sort for example. + * + * This driver is for the BMC side. The sysfs files allow the BMC + * userspace which owns the system configuration policy, to specify + * at what IO port and interrupt number the host side will appear + * to the host on the Host <-> BMC LPC bus. It could be different on a + * different system (though most of them use 3f8/4). + */ + +static ssize_t lpc_address_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + u16 addr; + + addr = (readb(vuart->regs + ASPEED_VUART_ADDRH) << 8) | + (readb(vuart->regs + ASPEED_VUART_ADDRL)); + + return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr); +} + +static ssize_t lpc_address_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 0, &val); + if (err) + return err; + + writeb(val >> 8, vuart->regs + ASPEED_VUART_ADDRH); + writeb(val >> 0, vuart->regs + ASPEED_VUART_ADDRL); + + return count; +} + +static DEVICE_ATTR_RW(lpc_address); + +static ssize_t sirq_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + u8 reg; + + reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + reg >>= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg); +} + +static ssize_t sirq_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + unsigned long val; + int err; + u8 reg; + + err = kstrtoul(buf, 0, &val); + if (err) + return err; + + val <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; + val &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + + reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + reg |= val; + writeb(reg, vuart->regs + ASPEED_VUART_GCRB); + + return count; +} + +static DEVICE_ATTR_RW(sirq); + +static struct attribute *aspeed_vuart_attrs[] = { + &dev_attr_sirq.attr, + &dev_attr_lpc_address.attr, + NULL, +}; + +static const struct attribute_group aspeed_vuart_attr_group = { + .attrs = aspeed_vuart_attrs, +}; + +static void aspeed_vuart_set_enabled(struct aspeed_vuart *vuart, bool enabled) +{ + u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA); + + if (enabled) + reg |= ASPEED_VUART_GCRA_VUART_EN; + else + reg &= ~ASPEED_VUART_GCRA_VUART_EN; + + writeb(reg, vuart->regs + ASPEED_VUART_GCRA); +} + +static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart, + bool discard) +{ + u8 reg; + + reg = readb(vuart->regs + ASPEED_VUART_GCRA); + + /* If the DISABLE_HOST_TX_DISCARD bit is set, discard is disabled */ + if (!discard) + reg |= ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD; + else + reg &= ~ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD; + + writeb(reg, vuart->regs + ASPEED_VUART_GCRA); +} + +static int aspeed_vuart_startup(struct uart_port *uart_port) +{ + struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port); + struct aspeed_vuart *vuart = uart_8250_port->port.private_data; + int rc; + + rc = serial8250_do_startup(uart_port); + if (rc) + return rc; + + aspeed_vuart_set_host_tx_discard(vuart, false); + + return 0; +} + +static void aspeed_vuart_shutdown(struct uart_port *uart_port) +{ + struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port); + struct aspeed_vuart *vuart = uart_8250_port->port.private_data; + + aspeed_vuart_set_host_tx_discard(vuart, true); + + serial8250_do_shutdown(uart_port); +} + +static int aspeed_vuart_probe(struct platform_device *pdev) +{ + struct uart_8250_port port; + struct aspeed_vuart *vuart; + struct device_node *np; + struct resource *res; + u32 clk, prop; + int rc; + + np = pdev->dev.of_node; + + vuart = devm_kzalloc(&pdev->dev, sizeof(*vuart), GFP_KERNEL); + if (!vuart) + return -ENOMEM; + + vuart->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + vuart->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(vuart->regs)) + return PTR_ERR(vuart->regs); + + memset(&port, 0, sizeof(port)); + port.port.private_data = vuart; + port.port.membase = vuart->regs; + port.port.mapbase = res->start; + port.port.mapsize = resource_size(res); + port.port.startup = aspeed_vuart_startup; + port.port.shutdown = aspeed_vuart_shutdown; + port.port.dev = &pdev->dev; + + rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); + if (rc < 0) + return rc; + + if (of_property_read_u32(np, "clock-frequency", &clk)) { + vuart->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(vuart->clk)) { + dev_warn(&pdev->dev, + "clk or clock-frequency not defined\n"); + return PTR_ERR(vuart->clk); + } + + rc = clk_prepare_enable(vuart->clk); + if (rc < 0) + return rc; + + clk = clk_get_rate(vuart->clk); + } + + /* If current-speed was set, then try not to change it. */ + if (of_property_read_u32(np, "current-speed", &prop) == 0) + port.port.custom_divisor = clk / (16 * prop); + + /* Check for shifted address mapping */ + if (of_property_read_u32(np, "reg-offset", &prop) == 0) + port.port.mapbase += prop; + + /* Check for registers offset within the devices address range */ + if (of_property_read_u32(np, "reg-shift", &prop) == 0) + port.port.regshift = prop; + + /* Check for fifo size */ + if (of_property_read_u32(np, "fifo-size", &prop) == 0) + port.port.fifosize = prop; + + /* Check for a fixed line number */ + rc = of_alias_get_id(np, "serial"); + if (rc >= 0) + port.port.line = rc; + + port.port.irq = irq_of_parse_and_map(np, 0); + port.port.irqflags = IRQF_SHARED; + port.port.iotype = UPIO_MEM; + port.port.type = PORT_16550A; + port.port.uartclk = clk; + port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF + | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST; + + if (of_property_read_bool(np, "no-loopback-test")) + port.port.flags |= UPF_SKIP_TEST; + + if (port.port.fifosize) + port.capabilities = UART_CAP_FIFO; + + if (of_property_read_bool(np, "auto-flow-control")) + port.capabilities |= UART_CAP_AFE; + + rc = serial8250_register_8250_port(&port); + if (rc < 0) + goto err_clk_disable; + + vuart->line = rc; + + aspeed_vuart_set_enabled(vuart, true); + aspeed_vuart_set_host_tx_discard(vuart, true); + platform_set_drvdata(pdev, vuart); + + return 0; + +err_clk_disable: + clk_disable_unprepare(vuart->clk); + irq_dispose_mapping(port.port.irq); + return rc; +} + +static int aspeed_vuart_remove(struct platform_device *pdev) +{ + struct aspeed_vuart *vuart = platform_get_drvdata(pdev); + + aspeed_vuart_set_enabled(vuart, false); + serial8250_unregister_port(vuart->line); + sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); + clk_disable_unprepare(vuart->clk); + + return 0; +} + +static const struct of_device_id aspeed_vuart_table[] = { + { .compatible = "aspeed,ast2400-vuart" }, + { .compatible = "aspeed,ast2500-vuart" }, + { }, +}; + +static struct platform_driver aspeed_vuart_driver = { + .driver = { + .name = "aspeed-vuart", + .of_match_table = aspeed_vuart_table, + }, + .probe = aspeed_vuart_probe, + .remove = aspeed_vuart_remove, +}; + +module_platform_driver(aspeed_vuart_driver); + +MODULE_AUTHOR("Jeremy Kerr "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for Aspeed VUART device"); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 0e3f529d50e9..a1161ec0256f 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -224,6 +224,16 @@ config SERIAL_8250_ACCENT To compile this driver as a module, choose M here: the module will be called 8250_accent. +config SERIAL_8250_ASPEED_VUART + tristate "Aspeed Virtual UART" + depends on SERIAL_8250 + depends on OF + help + If you want to use the virtual UART (VUART) device on Aspeed + BMC platforms, enable this option. This enables the 16550A- + compatible device on the local LPC bus, giving a UART device + with no physical RS232 connections. + config SERIAL_8250_BOCA tristate "Support Boca cards" depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 2f30f9ecdb1b..a44a99a3e623 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_ASPEED_VUART) += 8250_aspeed_vuart.o obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o -- cgit v1.2.3 From 1cf4a7efdc71cab84c42cfea7200608711ea954f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 25 Apr 2017 20:15:35 +0200 Subject: serial: sh-sci: Fix race condition causing garbage during shutdown If DMA is enabled and used, a burst of old data may be seen on the serial console during "poweroff" or "reboot". uart_flush_buffer() clears the circular buffer, but sci_port.tx_dma_len is not reset. This leads to a circular buffer overflow, dumping (UART_XMIT_SIZE - sci_port.tx_dma_len) bytes. To fix this, add a .flush_buffer() callback that resets sci_port.tx_dma_len. Inspired by commit 31ca2c63fdc0aee7 ("tty/serial: atmel: fix race condition (TX+DMA)"). Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 71707e8e6e3f..21b06cf1f15b 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1558,7 +1558,16 @@ static void sci_free_dma(struct uart_port *port) if (s->chan_rx) sci_rx_dma_release(s, false); } -#else + +static void sci_flush_buffer(struct uart_port *port) +{ + /* + * In uart_flush_buffer(), the xmit circular buffer has just been + * cleared, so we have to reset tx_dma_len accordingly. + */ + to_sci_port(port)->tx_dma_len = 0; +} +#else /* !CONFIG_SERIAL_SH_SCI_DMA */ static inline void sci_request_dma(struct uart_port *port) { } @@ -1566,7 +1575,9 @@ static inline void sci_request_dma(struct uart_port *port) static inline void sci_free_dma(struct uart_port *port) { } -#endif + +#define sci_flush_buffer NULL +#endif /* !CONFIG_SERIAL_SH_SCI_DMA */ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) { @@ -2581,6 +2592,7 @@ static const struct uart_ops sci_uart_ops = { .break_ctl = sci_break_ctl, .startup = sci_startup, .shutdown = sci_shutdown, + .flush_buffer = sci_flush_buffer, .set_termios = sci_set_termios, .pm = sci_pm, .type = sci_type, -- cgit v1.2.3 From bd8766b158fb5def7633df1b2d2ec78a48941035 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 20 Apr 2017 14:13:00 +0200 Subject: serial: pl010: Move uart_register_driver call to device probe uart_register_driver call binds the driver to a specific device node through tty_register_driver call. This should typically happen during device probe call. In a multiplatform scenario, it is possible that multiple serial drivers are part of the kernel. Currently the driver registration fails if multiple serial drivers with overlapping major/minor numbers are included. Signed-off-by: Sjoerd Simons Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl010.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index f2f251075109..24180adb1cbb 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -697,6 +697,7 @@ static struct console amba_console = { #define AMBA_CONSOLE NULL #endif +static DEFINE_MUTEX(amba_reg_lock); static struct uart_driver amba_reg = { .owner = THIS_MODULE, .driver_name = "ttyAM", @@ -749,6 +750,19 @@ static int pl010_probe(struct amba_device *dev, const struct amba_id *id) amba_ports[i] = uap; amba_set_drvdata(dev, uap); + + mutex_lock(&amba_reg_lock); + if (!amba_reg.state) { + ret = uart_register_driver(&amba_reg); + if (ret < 0) { + mutex_unlock(&amba_reg_lock); + dev_err(uap->port.dev, + "Failed to register AMBA-PL010 driver\n"); + return ret; + } + } + mutex_unlock(&amba_reg_lock); + ret = uart_add_one_port(&amba_reg, &uap->port); if (ret) amba_ports[i] = NULL; @@ -760,12 +774,18 @@ static int pl010_remove(struct amba_device *dev) { struct uart_amba_port *uap = amba_get_drvdata(dev); int i; + bool busy = false; uart_remove_one_port(&amba_reg, &uap->port); for (i = 0; i < ARRAY_SIZE(amba_ports); i++) if (amba_ports[i] == uap) amba_ports[i] = NULL; + else if (amba_ports[i]) + busy = true; + + if (!busy) + uart_unregister_driver(&amba_reg); return 0; } @@ -816,23 +836,14 @@ static struct amba_driver pl010_driver = { static int __init pl010_init(void) { - int ret; - printk(KERN_INFO "Serial: AMBA driver\n"); - ret = uart_register_driver(&amba_reg); - if (ret == 0) { - ret = amba_driver_register(&pl010_driver); - if (ret) - uart_unregister_driver(&amba_reg); - } - return ret; + return amba_driver_register(&pl010_driver); } static void __exit pl010_exit(void) { amba_driver_unregister(&pl010_driver); - uart_unregister_driver(&amba_reg); } module_init(pl010_init); -- cgit v1.2.3 From 352b92664549e9dcdded742424a96aac9a0dbb40 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 20 Apr 2017 14:13:01 +0200 Subject: serial: sh-sci: Move uart_register_driver call to device probe uart_register_driver call binds the driver to a specific device node through tty_register_driver call. This should typically happen during device probe call. In a multiplatform scenario, it is possible that multiple serial drivers are part of the kernel. Currently the driver registration fails if multiple serial drivers with overlapping major/minor numbers are included. Signed-off-by: Sjoerd Simons Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 21b06cf1f15b..54de985ad214 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2962,6 +2962,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev) static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized"; +static DEFINE_MUTEX(sci_uart_registration_lock); static struct uart_driver sci_uart_driver = { .owner = THIS_MODULE, .driver_name = "sci", @@ -3090,6 +3091,16 @@ static int sci_probe_single(struct platform_device *dev, return -EINVAL; } + mutex_lock(&sci_uart_registration_lock); + if (!sci_uart_driver.state) { + ret = uart_register_driver(&sci_uart_driver); + if (ret) { + mutex_unlock(&sci_uart_registration_lock); + return ret; + } + } + mutex_unlock(&sci_uart_registration_lock); + ret = sci_init_single(dev, sciport, index, p, false); if (ret) return ret; @@ -3213,24 +3224,17 @@ static struct platform_driver sci_driver = { static int __init sci_init(void) { - int ret; - pr_info("%s\n", banner); - ret = uart_register_driver(&sci_uart_driver); - if (likely(ret == 0)) { - ret = platform_driver_register(&sci_driver); - if (unlikely(ret)) - uart_unregister_driver(&sci_uart_driver); - } - - return ret; + return platform_driver_register(&sci_driver); } static void __exit sci_exit(void) { platform_driver_unregister(&sci_driver); - uart_unregister_driver(&sci_uart_driver); + + if (sci_uart_driver.state) + uart_unregister_driver(&sci_uart_driver); } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -- cgit v1.2.3 From 56c607b509587e67e5f53587fdb05698ef85e278 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 10 May 2017 10:53:27 +0200 Subject: tty: serdev-ttyport: return actual baudrate from ttyport_set_baudrate Instead of returning the requested baudrate, we better return the actual one because it isn't always the same. Signed-off-by: Stefan Wahren Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serdev/serdev-ttyport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c index 487c88f6aa0e..2cfdf34101f1 100644 --- a/drivers/tty/serdev/serdev-ttyport.c +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -151,7 +151,7 @@ static unsigned int ttyport_set_baudrate(struct serdev_controller *ctrl, unsigne /* tty_set_termios() return not checked as it is always 0 */ tty_set_termios(tty, &ktermios); - return speed; + return ktermios.c_ospeed; } static void ttyport_set_flow_control(struct serdev_controller *ctrl, bool enable) -- cgit v1.2.3 From 4dec2f119e86f9c91e60cdd8f0cc057452e331a9 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 14 May 2017 14:35:15 +0200 Subject: imx-serial: RX DMA startup latency 18a4208 introduced a change to reduce the RX DMA latency on the first reception when the serial port was opened for reading. However it was claiming a hardirq unsafe lock after a hardirq safe lock which is not allowed and causes lockdep to complain verbosely. This patch changes the code to always start RX DMA earlier, instead of relying on the flags used to open the serial port removing the code that was looking for the serial file flags. Signed-off-by: Peter Senna Tschudin Tested-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 26 +++++--------------------- 1 file changed, 5 insertions(+), 21 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 33509b4beaec..64e16b37ebdb 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1340,29 +1340,13 @@ static int imx_startup(struct uart_port *port) imx_enable_ms(&sport->port); /* - * If the serial port is opened for reading start RX DMA immediately - * instead of waiting for RX FIFO interrupts. In our iMX53 the average - * delay for the first reception dropped from approximately 35000 - * microseconds to 1000 microseconds. + * Start RX DMA immediately instead of waiting for RX FIFO interrupts. + * In our iMX53 the average delay for the first reception dropped from + * approximately 35000 microseconds to 1000 microseconds. */ if (sport->dma_is_enabled) { - struct tty_struct *tty = sport->port.state->port.tty; - struct tty_file_private *file_priv; - int readcnt = 0; - - spin_lock(&tty->files_lock); - - if (!list_empty(&tty->tty_files)) - list_for_each_entry(file_priv, &tty->tty_files, list) - if (!(file_priv->file->f_flags & O_WRONLY)) - readcnt++; - - spin_unlock(&tty->files_lock); - - if (readcnt > 0) { - imx_disable_rx_int(sport); - start_rx_dma(sport); - } + imx_disable_rx_int(sport); + start_rx_dma(sport); } spin_unlock_irqrestore(&sport->port.lock, flags); -- cgit v1.2.3 From 7dea8165f1d6434dc7572004363f86339f0f4322 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Sat, 13 May 2017 09:28:59 +0200 Subject: serial: exar: Preconfigure xr17v35x MPIOs as output This is the safe default for GPIOs with unknown external wiring. Signed-off-by: Jan Kiszka Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_exar.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 2a8f00d96e6b..0a20f7185094 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -176,13 +176,13 @@ static void setup_gpio(u8 __iomem *p) writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); writeb(0x00, p + UART_EXAR_MPIO3T_7_0); writeb(0x00, p + UART_EXAR_MPIOINV_7_0); - writeb(0x00, p + UART_EXAR_MPIOSEL_7_0); + writeb(0xff, p + UART_EXAR_MPIOSEL_7_0); writeb(0x00, p + UART_EXAR_MPIOOD_7_0); writeb(0x00, p + UART_EXAR_MPIOINT_15_8); writeb(0x00, p + UART_EXAR_MPIOLVL_15_8); writeb(0x00, p + UART_EXAR_MPIO3T_15_8); writeb(0x00, p + UART_EXAR_MPIOINV_15_8); - writeb(0x00, p + UART_EXAR_MPIOSEL_15_8); + writeb(0xff, p + UART_EXAR_MPIOSEL_15_8); writeb(0x00, p + UART_EXAR_MPIOOD_15_8); } -- cgit v1.2.3 From 228a9ff8fed0c800ffb9b665916646b1d5833a67 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 22 Apr 2017 13:35:33 +0100 Subject: drivers/tty/hvc: fix spelling mistake: "missmanaged" -> "mismanaged" Trivial fix to spelling mistake in printk message Signed-off-by: Colin Ian King Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvcs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 99bb875178d7..423e28ec27fb 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -1242,8 +1242,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) free_irq(irq, hvcsd); return; } else if (hvcsd->port.count < 0) { - printk(KERN_ERR "HVCS: vty-server@%X open_count: %d" - " is missmanaged.\n", + printk(KERN_ERR "HVCS: vty-server@%X open_count: %d is mismanaged.\n", hvcsd->vdev->unit_address, hvcsd->port.count); } -- cgit v1.2.3 From 2b5cf14bd0c82164eb3689dd4cfb67a78a23302c Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Sat, 29 Apr 2017 09:39:00 +0800 Subject: tty/serial: atmel: use offset_in_page() macro Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index c355ac9abafc..d25f044158ff 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include @@ -959,7 +960,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port) sg_set_page(&atmel_port->sg_tx, virt_to_page(port->state->xmit.buf), UART_XMIT_SIZE, - (unsigned long)port->state->xmit.buf & ~PAGE_MASK); + offset_in_page(port->state->xmit.buf)); nent = dma_map_sg(port->dev, &atmel_port->sg_tx, 1, @@ -1141,7 +1142,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port) sg_set_page(&atmel_port->sg_rx, virt_to_page(ring->buf), sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE, - (unsigned long)ring->buf & ~PAGE_MASK); + offset_in_page(ring->buf)); nent = dma_map_sg(port->dev, &atmel_port->sg_rx, 1, -- cgit v1.2.3 From d1e06a4392d0e65f92d3e8c7020061aaeceed502 Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Sat, 22 Apr 2017 09:21:11 +0800 Subject: serial: pch_uart: use offset_in_page() macro Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 42caccb5e87e..d3796dc26fa9 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -878,8 +878,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_dma_len(sg) = priv->trigger_level; sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), - sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & - ~PAGE_MASK); + sg_dma_len(sg), offset_in_page(priv->rx_buf_virt)); sg_dma_address(sg) = priv->rx_buf_dma; -- cgit v1.2.3 From e8759ad17d41913dfeb49736ca7fbfbc96f32c54 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Sat, 13 May 2017 09:29:04 +0200 Subject: serial: uapi: Add support for bus termination The Siemens IOT2040 comes with a RS485 interface that allows to enable or disable bus termination via software. Add a bit to the flags field of serial_rs485 that applications can set in order to request this feature from the hardware. This seems generic enough to add it for everyone. Existing driver will simply ignore it when set. Signed-off-by: Sascha Weisenberger Signed-off-by: Jan Kiszka Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/serial.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index 5d59c3ebf459..d2667ecd54ac 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -122,6 +122,9 @@ struct serial_rs485 { #define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for RTS pin after sent*/ #define SER_RS485_RX_DURING_TX (1 << 4) +#define SER_RS485_TERMINATE_BUS (1 << 5) /* Enable bus + termination + (if supported) */ __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ __u32 padding[5]; /* Memory is cheap, new structs -- cgit v1.2.3 From 7b6d53994470bfe24aad0c29d8fb289745a895c7 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 9 May 2017 20:07:13 +0300 Subject: tty/vt/keyboard: Remove AVR32 bits from the driver AVR32 is gone. Now it's time to clean up the driver by removing leftovers that was used by AVR32 related code. Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/keyboard.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 8af8d9542663..f4166263bb3a 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -1203,8 +1203,7 @@ DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0); #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\ defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\ defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ - (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\ - defined(CONFIG_AVR32) + (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\ ((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001)) -- cgit v1.2.3 From 88f37d707132fa7854d337455e3290af1c8fae5d Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 19 Apr 2017 22:17:24 +0200 Subject: serial: meson: fix setting number of stop bits The stop bit value as to be or'ed, so far this worked only just by chance because AML_UART_STOP_BIN_1SB is 0. Signed-off-by: Heiner Kallweit Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/meson_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 60f16795d16b..e2e25da10f19 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -355,7 +355,7 @@ static void meson_uart_set_termios(struct uart_port *port, if (cflags & CSTOPB) val |= AML_UART_STOP_BIN_2SB; else - val &= ~AML_UART_STOP_BIN_1SB; + val |= AML_UART_STOP_BIN_1SB; if (cflags & CRTSCTS) val &= ~AML_UART_TWO_WIRE_EN; -- cgit v1.2.3 From ba50f1df13c8f1a7bbd301cacde4b668b4a3b1bb Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 19 Apr 2017 22:17:44 +0200 Subject: serial: meson: remove unneeded variable assignment in meson_serial_port_write There's no need to set AML_UART_TX_EN in each call to meson_serial_port_write. In addition to meson_uart_startup set this flag in meson_serial_console_setup and meson_serial_early_console_setup. Signed-off-by: Heiner Kallweit Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/meson_uart.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index e2e25da10f19..97e16db32468 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -124,6 +124,15 @@ static void meson_uart_stop_rx(struct uart_port *port) writel(val, port->membase + AML_UART_CONTROL); } +static void meson_uart_enable_tx_engine(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_TX_EN; + writel(val, port->membase + AML_UART_CONTROL); +} + static void meson_uart_shutdown(struct uart_port *port) { unsigned long flags; @@ -499,7 +508,6 @@ static void meson_serial_port_write(struct uart_port *port, const char *s, } val = readl(port->membase + AML_UART_CONTROL); - val |= AML_UART_TX_EN; tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN); writel(tmp, port->membase + AML_UART_CONTROL); @@ -538,6 +546,8 @@ static int meson_serial_console_setup(struct console *co, char *options) if (!port || !port->membase) return -ENODEV; + meson_uart_enable_tx_engine(port); + if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -576,6 +586,7 @@ meson_serial_early_console_setup(struct earlycon_device *device, const char *opt if (!device->port.membase) return -ENODEV; + meson_uart_enable_tx_engine(&device->port); device->con->write = meson_serial_early_console_write; return 0; } -- cgit v1.2.3 From 5a2ce87bf27579ea359f0caba34f17fd6d0798d5 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 19 Apr 2017 22:17:31 +0200 Subject: serial: meson: remove dead code in meson_uart_change_speed val is set in both branches of the if clause, therefore the two removed lines are dead code. Signed-off-by: Heiner Kallweit Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/meson_uart.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 97e16db32468..e93a1e47ec6c 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -307,8 +307,6 @@ static void meson_uart_change_speed(struct uart_port *port, unsigned long baud) while (!meson_uart_tx_empty(port)) cpu_relax(); - val = readl(port->membase + AML_UART_REG5); - val &= ~AML_UART_BAUD_MASK; if (port->uartclk == 24000000) { val = ((port->uartclk / 3) / baud) - 1; val |= AML_UART_BAUD_XTAL; -- cgit v1.2.3 From ff3b9cad7d630980987bc46853b2dae75143dc75 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 19 Apr 2017 22:17:47 +0200 Subject: serial: meson: make use of uart_port member mapsize Member mapsize of struct uart_port is meant to store the resource size. By using it we can get rid of meson_uart_res_size(). Signed-off-by: Heiner Kallweit Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/meson_uart.c | 29 +++++------------------------ 1 file changed, 5 insertions(+), 24 deletions(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index e93a1e47ec6c..1220c9ac8d4b 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -402,26 +402,11 @@ static int meson_uart_verify_port(struct uart_port *port, return ret; } -static int meson_uart_res_size(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(port->dev, "cannot obtain I/O memory region"); - return -ENODEV; - } - - return resource_size(res); -} - static void meson_uart_release_port(struct uart_port *port) { - int size = meson_uart_res_size(port); - if (port->flags & UPF_IOREMAP) { - devm_release_mem_region(port->dev, port->mapbase, size); + devm_release_mem_region(port->dev, port->mapbase, + port->mapsize); devm_iounmap(port->dev, port->membase); port->membase = NULL; } @@ -429,12 +414,7 @@ static void meson_uart_release_port(struct uart_port *port) static int meson_uart_request_port(struct uart_port *port) { - int size = meson_uart_res_size(port); - - if (size < 0) - return size; - - if (!devm_request_mem_region(port->dev, port->mapbase, size, + if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize, dev_name(port->dev))) { dev_err(port->dev, "Memory region busy\n"); return -EBUSY; @@ -443,7 +423,7 @@ static int meson_uart_request_port(struct uart_port *port) if (port->flags & UPF_IOREMAP) { port->membase = devm_ioremap_nocache(port->dev, port->mapbase, - size); + port->mapsize); if (port->membase == NULL) return -ENOMEM; } @@ -641,6 +621,7 @@ static int meson_uart_probe(struct platform_device *pdev) port->uartclk = clk_get_rate(clk); port->iotype = UPIO_MEM; port->mapbase = res_mem->start; + port->mapsize = resource_size(res_mem); port->irq = res_irq->start; port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY; port->dev = &pdev->dev; -- cgit v1.2.3 From 1b1ecaa69c4f90e79f1083778b2cf50eba2573c2 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 19 Apr 2017 22:17:50 +0200 Subject: serial: meson: remove use of flag UPF_IOREMAP Flag UPF_IOREMAP is used by the 8250 subsystem only, it's not used by the serial core. Therefore I don't see any benefit in using it here. In addition fix the order of calls in meson_uart_release_port. Unmapping needs to be done first, reversing call order in meson_uart_request_port. Signed-off-by: Heiner Kallweit Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/meson_uart.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 1220c9ac8d4b..171eb673ed8c 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -404,12 +404,9 @@ static int meson_uart_verify_port(struct uart_port *port, static void meson_uart_release_port(struct uart_port *port) { - if (port->flags & UPF_IOREMAP) { - devm_release_mem_region(port->dev, port->mapbase, - port->mapsize); - devm_iounmap(port->dev, port->membase); - port->membase = NULL; - } + devm_iounmap(port->dev, port->membase); + port->membase = NULL; + devm_release_mem_region(port->dev, port->mapbase, port->mapsize); } static int meson_uart_request_port(struct uart_port *port) @@ -420,13 +417,10 @@ static int meson_uart_request_port(struct uart_port *port) return -EBUSY; } - if (port->flags & UPF_IOREMAP) { - port->membase = devm_ioremap_nocache(port->dev, - port->mapbase, - port->mapsize); - if (port->membase == NULL) - return -ENOMEM; - } + port->membase = devm_ioremap_nocache(port->dev, port->mapbase, + port->mapsize); + if (!port->membase) + return -ENOMEM; return 0; } @@ -623,7 +617,7 @@ static int meson_uart_probe(struct platform_device *pdev) port->mapbase = res_mem->start; port->mapsize = resource_size(res_mem); port->irq = res_irq->start; - port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY; + port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY; port->dev = &pdev->dev; port->line = pdev->id; port->type = PORT_MESON; -- cgit v1.2.3 From 8b7a6b2b8e379eaa7d5074ad37ab3759112923aa Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 19 Apr 2017 22:18:16 +0200 Subject: serial: meson: change interrupt description to tty name Change interrupt description from driver name to tty name (e.g. ttyAML0). If multiple serial ports are enabled this allows to determine which interrupt belongs to which port in /proc/interrupts. Signed-off-by: Heiner Kallweit Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/meson_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 171eb673ed8c..082e038e67f8 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -295,7 +295,7 @@ static int meson_uart_startup(struct uart_port *port) writel(val, port->membase + AML_UART_MISC); ret = request_irq(port->irq, meson_uart_interrupt, 0, - meson_uart_type(port), port); + port->name, port); return ret; } -- cgit v1.2.3 From d653c43aefedd3d22d3d2222c10f5b6ae2dfbe13 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Tue, 9 May 2017 11:50:32 +0530 Subject: serial: xilinx_uartps: Fix the error path Fix the runtime calls in the error path. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index c0539950f8d7..b5b77ba3ac65 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1587,20 +1587,21 @@ static int cdns_uart_probe(struct platform_device *pdev) if (rc) { dev_err(&pdev->dev, "uart_add_one_port() failed; err=%i\n", rc); - goto err_out_notif_unreg; + goto err_out_pm_disable; } return 0; +err_out_pm_disable: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); err_out_notif_unreg: #ifdef CONFIG_COMMON_CLK clk_notifier_unregister(cdns_uart_data->uartclk, &cdns_uart_data->clk_rate_change_nb); #endif err_out_clk_disable: - pm_runtime_disable(&pdev->dev); - pm_runtime_set_suspended(&pdev->dev); - pm_runtime_dont_use_autosuspend(&pdev->dev); clk_disable_unprepare(cdns_uart_data->uartclk); err_out_clk_dis_pclk: clk_disable_unprepare(cdns_uart_data->pclk); -- cgit v1.2.3 From 5fa4accf5efad012731bf36222815d7df8c17ba6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 May 2017 15:37:03 +0200 Subject: serial: meson: hide an unused function The newly added meson_uart_enable_tx_engine function is only called from the console setup, not the runtime uart, which has an open-coded version of the same register access. This produces a harmless warning when the console code is disabled: drivers/tty/serial/meson_uart.c:127:13: error: 'meson_uart_enable_tx_engine' defined but not used [-Werror=unused-function] Let's move the function inside of the #ifdef to avoid the warning. Fixes: ba50f1df13c8 ("serial: meson: remove unneeded variable assignment in meson_serial_port_write") Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/meson_uart.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 082e038e67f8..c0e34dabadd8 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -124,15 +124,6 @@ static void meson_uart_stop_rx(struct uart_port *port) writel(val, port->membase + AML_UART_CONTROL); } -static void meson_uart_enable_tx_engine(struct uart_port *port) -{ - u32 val; - - val = readl(port->membase + AML_UART_CONTROL); - val |= AML_UART_TX_EN; - writel(val, port->membase + AML_UART_CONTROL); -} - static void meson_uart_shutdown(struct uart_port *port) { unsigned long flags; @@ -451,6 +442,14 @@ static struct uart_ops meson_uart_ops = { }; #ifdef CONFIG_SERIAL_MESON_CONSOLE +static void meson_uart_enable_tx_engine(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_TX_EN; + writel(val, port->membase + AML_UART_CONTROL); +} static void meson_console_putchar(struct uart_port *port, int ch) { -- cgit v1.2.3 From 9b7becf103e2689d7f005895130ccf89a153fef1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 22 May 2017 15:15:02 +0200 Subject: serial: sh-sci: Update warning message in sci_request_dma_chan() The commit below changed a function call from dma_request_slave_channel_compat() to dma_request_slave_channel(), but forgot to update the printed failure message. Fixes: 219fb0c1436e4893 ("serial: sh-sci: Remove the platform data dma slave rx/tx channel IDs") Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 54de985ad214..da5ddfc14778 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1450,8 +1450,7 @@ static struct dma_chan *sci_request_dma_chan(struct uart_port *port, chan = dma_request_slave_channel(port->dev, dir == DMA_MEM_TO_DEV ? "tx" : "rx"); if (!chan) { - dev_warn(port->dev, - "dma_request_slave_channel_compat failed\n"); + dev_warn(port->dev, "dma_request_slave_channel failed\n"); return NULL; } -- cgit v1.2.3 From d087e7a991f1f61ee2c07db1be7c5cc2aa373f5d Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 19 May 2017 16:07:23 +0100 Subject: serial: 8250: Add CAP_MINI, set for bcm2835aux The AUX/mini-UART in the BCM2835 family of procesors is a cut-down 8250 clone. In particular it is lacking support for the following features: CSTOPB PARENB PARODD CMSPAR CS5 CS6 Add a new capability (UART_CAP_MINI) that exposes the restrictions to the user of the termios API by turning off the unsupported features in the request. N.B. It is almost possible to automatically discover the missing features by reading back the LCR register, but the CSIZE bits don't cooperate (contrary to the documentation, both bits are significant, but CS5 and CS6 are mapped to CS7) and the code is much longer. See: https://github.com/raspberrypi/linux/issues/1561 Signed-off-by: Phil Elwell Acked-by: Eric Anholt Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.h | 3 +++ drivers/tty/serial/8250/8250_bcm2835aux.c | 2 +- drivers/tty/serial/8250/8250_port.c | 6 ++++++ 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index ce8d4ffcc425..b2bdc35f7495 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -81,6 +81,9 @@ struct serial8250_config { #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ #define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */ +#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks: + * STOP PARITY EPAR SPAR WLEN5 WLEN6 + */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index e10f1244409b..a23c7da42ea8 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -39,7 +39,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) /* initialize data */ spin_lock_init(&data->uart.port.lock); - data->uart.capabilities = UART_CAP_FIFO; + data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI; data->uart.port.dev = &pdev->dev; data->uart.port.regshift = 2; data->uart.port.type = PORT_16550; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index d5b6cee87801..b4e71380a13c 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2584,6 +2584,12 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int baud, quot, frac = 0; + if (up->capabilities & UART_CAP_MINI) { + termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); + if ((termios->c_cflag & CSIZE) == CS5 || + (termios->c_cflag & CSIZE) == CS6) + termios->c_cflag = (termios->c_cflag & ~CSIZE) | CS7; + } cval = serial8250_compute_lcr(up, termios->c_cflag); baud = serial8250_get_baud_rate(port, termios, old); -- cgit v1.2.3 From 47f58e32a27c647de0963386d2714d570b38e3d3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 3 Jun 2017 18:41:07 +0900 Subject: tty: reserve N_SPEAKUP number Over in the staging tree, N_SPEAKUP is added, so to make life easier for merging and other development, also reserve it in the tty tree. Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/tty.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h index 01c4410352ff..e7855dffd592 100644 --- a/include/uapi/linux/tty.h +++ b/include/uapi/linux/tty.h @@ -35,5 +35,6 @@ #define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */ #define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ #define N_NCI 25 /* NFC NCI UART */ +#define N_SPEAKUP 26 /* Speakup communication with synths */ #endif /* _UAPI_LINUX_TTY_H */ -- cgit v1.2.3 From 8a8dabf2dd68caff842d38057097c23bc514ea6e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 2 Jun 2017 13:49:30 +0100 Subject: tty: handle the case where we cannot restore a line discipline Historically the N_TTY driver could never fail but this has become broken over time. Rather than trying to rewrite half the ldisc layer to fix the breakage introduce a second level of fallback with an N_NULL ldisc which cannot fail, and thus restore the guarantees required by the ldisc layer. We still try and fail to N_TTY first. It's much more useful to find yourself back in your old ldisc (first attempt) or in N_TTY (second attempt), and while I'm not aware of any code out there that makes those assumptions it's good to drive(r) defensively. Signed-off-by: Alan Cox Reported-by: Dmitry Vyukov Tested-by: Dmitry Vyukov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/Makefile | 3 +- drivers/tty/n_null.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/tty/tty_ldisc.c | 44 +++++++++++++++++--------- include/uapi/linux/tty.h | 1 + 4 files changed, 113 insertions(+), 15 deletions(-) create mode 100644 drivers/tty/n_null.c diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index f02becdb3e33..8689279afdf1 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ tty_buffer.o tty_port.o tty_mutex.o \ - tty_ldsem.o tty_baudrate.o tty_jobctrl.o + tty_ldsem.o tty_baudrate.o tty_jobctrl.o \ + n_null.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c new file mode 100644 index 000000000000..d63261c36e42 --- /dev/null +++ b/drivers/tty/n_null.c @@ -0,0 +1,80 @@ +#include +#include +#include +#include + +/* + * n_null.c - Null line discipline used in the failure path + * + * Copyright (C) Intel 2017 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +static int n_null_open(struct tty_struct *tty) +{ + return 0; +} + +static void n_null_close(struct tty_struct *tty) +{ +} + +static ssize_t n_null_read(struct tty_struct *tty, struct file *file, + unsigned char __user * buf, size_t nr) +{ + return -EOPNOTSUPP; +} + +static ssize_t n_null_write(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr) +{ + return -EOPNOTSUPP; +} + +static void n_null_receivebuf(struct tty_struct *tty, + const unsigned char *cp, char *fp, + int cnt) +{ +} + +static struct tty_ldisc_ops null_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "n_null", + .open = n_null_open, + .close = n_null_close, + .read = n_null_read, + .write = n_null_write, + .receive_buf = n_null_receivebuf +}; + +static int __init n_null_init(void) +{ + BUG_ON(tty_register_ldisc(N_NULL, &null_ldisc)); + return 0; +} + +static void __exit n_null_exit(void) +{ + tty_unregister_ldisc(N_NULL); +} + +module_init(n_null_init); +module_exit(n_null_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alan Cox"); +MODULE_ALIAS_LDISC(N_NULL); +MODULE_DESCRIPTION("Null ldisc driver"); diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index e4603b09863a..4a04567d9aef 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -491,6 +491,29 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) tty_ldisc_debug(tty, "%p: closed\n", ld); } +/** + * tty_ldisc_failto - helper for ldisc failback + * @tty: tty to open the ldisc on + * @ld: ldisc we are trying to fail back to + * + * Helper to try and recover a tty when switching back to the old + * ldisc fails and we need something attached. + */ + +static int tty_ldisc_failto(struct tty_struct *tty, int ld) +{ + struct tty_ldisc *disc = tty_ldisc_get(tty, ld); + int r; + + if (IS_ERR(disc)) + return PTR_ERR(disc); + tty->ldisc = disc; + tty_set_termios_ldisc(tty, ld); + if ((r = tty_ldisc_open(tty, disc)) < 0) + tty_ldisc_put(disc); + return r; +} + /** * tty_ldisc_restore - helper for tty ldisc change * @tty: tty to recover @@ -502,9 +525,6 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) { - struct tty_ldisc *new_ldisc; - int r; - /* There is an outstanding reference here so this is safe */ old = tty_ldisc_get(tty, old->ops->num); WARN_ON(IS_ERR(old)); @@ -512,17 +532,13 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) tty_set_termios_ldisc(tty, old->ops->num); if (tty_ldisc_open(tty, old) < 0) { tty_ldisc_put(old); - /* This driver is always present */ - new_ldisc = tty_ldisc_get(tty, N_TTY); - if (IS_ERR(new_ldisc)) - panic("n_tty: get"); - tty->ldisc = new_ldisc; - tty_set_termios_ldisc(tty, N_TTY); - r = tty_ldisc_open(tty, new_ldisc); - if (r < 0) - panic("Couldn't open N_TTY ldisc for " - "%s --- error %d.", - tty_name(tty), r); + /* The traditional behaviour is to fall back to N_TTY, we + want to avoid falling back to N_NULL unless we have no + choice to avoid the risk of breaking anything */ + if (tty_ldisc_failto(tty, N_TTY) < 0 && + tty_ldisc_failto(tty, N_NULL) < 0) + panic("Couldn't open N_NULL ldisc for %s.", + tty_name(tty)); } } diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h index e7855dffd592..cf1455396df0 100644 --- a/include/uapi/linux/tty.h +++ b/include/uapi/linux/tty.h @@ -36,5 +36,6 @@ #define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ #define N_NCI 25 /* NFC NCI UART */ #define N_SPEAKUP 26 /* Speakup communication with synths */ +#define N_NULL 27 /* Null ldisc used for error handling */ #endif /* _UAPI_LINUX_TTY_H */ -- cgit v1.2.3 From e279e6d98e0cf2c2fe008b3c29042b92f0e17b1d Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Wed, 31 May 2017 22:21:03 +0200 Subject: Fix serial console on SNI RM400 machines sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK is disabled. Correct usage of clk API to make it work with/without it. Fixes: 90efa75f7ab0 (serial: sccnxp: Using CLK API for getting UART clock) Suggested-by: Russell King - ARM Linux Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sccnxp.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index fcf803ffad19..cdd2f942317c 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -884,14 +884,19 @@ static int sccnxp_probe(struct platform_device *pdev) clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { - if (PTR_ERR(clk) == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; + ret = PTR_ERR(clk); + if (ret == -EPROBE_DEFER) goto err_out; - } + uartclk = 0; + } else { + clk_prepare_enable(clk); + uartclk = clk_get_rate(clk); + } + + if (!uartclk) { dev_notice(&pdev->dev, "Using default clock frequency\n"); uartclk = s->chip->freq_std; - } else - uartclk = clk_get_rate(clk); + } /* Check input frequency */ if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) { -- cgit v1.2.3 From 71e0779153968c79038a8ed53610d69624115fca Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 31 May 2017 08:19:05 +0200 Subject: tty: n_gsm: do not send/receive in ldisc close path gsm_cleanup_mux() is called in the line discipline close path which is called at tty_release() time. At this stage the tty is no longer operational enough to send any frames. Sending close frames is therefore not possible and waiting for their answers always times out. This patch removes sending close messages and waiting for their answers from the tty_release path. This patch makes explicit what previously implicitly had been the case already: We are not able to tell the modem that we are about to close the multiplexer on our side. This means the modem will stay in multiplexer mode and re-establishing the multiplexer later fails. The only way for userspace to work around this is to manually send a close frame in N_TTY mode after closing the mux. Signed-off-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- Documentation/serial/n_gsm.txt | 7 ++++++ drivers/tty/n_gsm.c | 54 +++++++++++++++++++++++++++--------------- 2 files changed, 42 insertions(+), 19 deletions(-) diff --git a/Documentation/serial/n_gsm.txt b/Documentation/serial/n_gsm.txt index a5d91126a8f7..875361bb7cb4 100644 --- a/Documentation/serial/n_gsm.txt +++ b/Documentation/serial/n_gsm.txt @@ -77,6 +77,13 @@ for example, it's possible : 6- first close all virtual ports before closing the physical port. +Note that after closing the physical port the modem is still in multiplexing +mode. This may prevent a successful re-opening of the port later. To avoid +this situation either reset the modem if your hardware allows that or send +a disconnect command frame manually before initializing the multiplexing mode +for the second time. The byte sequence for the disconnect command frame is: +0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9. + Additional Documentation ------------------------ More practical details on the protocol and how it's supported by industrial diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 2667a205a5ab..363a8ca824ad 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2015,6 +2015,33 @@ static void gsm_error(struct gsm_mux *gsm, gsm->io_error++; } +static int gsm_disconnect(struct gsm_mux *gsm) +{ + struct gsm_dlci *dlci = gsm->dlci[0]; + struct gsm_control *gc; + + if (!dlci) + return 0; + + /* In theory disconnecting DLCI 0 is sufficient but for some + modems this is apparently not the case. */ + gc = gsm_control_send(gsm, CMD_CLD, NULL, 0); + if (gc) + gsm_control_wait(gsm, gc); + + del_timer_sync(&gsm->t2_timer); + /* Now we are sure T2 has stopped */ + + gsm_dlci_begin_close(dlci); + wait_event_interruptible(gsm->event, + dlci->state == DLCI_CLOSED); + + if (signal_pending(current)) + return -EINTR; + + return 0; +} + /** * gsm_cleanup_mux - generic GSM protocol cleanup * @gsm: our mux @@ -2029,7 +2056,6 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm) int i; struct gsm_dlci *dlci = gsm->dlci[0]; struct gsm_msg *txq, *ntxq; - struct gsm_control *gc; gsm->dead = 1; @@ -2045,21 +2071,11 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm) if (i == MAX_MUX) return; - /* In theory disconnecting DLCI 0 is sufficient but for some - modems this is apparently not the case. */ - if (dlci) { - gc = gsm_control_send(gsm, CMD_CLD, NULL, 0); - if (gc) - gsm_control_wait(gsm, gc); - } del_timer_sync(&gsm->t2_timer); /* Now we are sure T2 has stopped */ - if (dlci) { + if (dlci) dlci->dead = 1; - gsm_dlci_begin_close(dlci); - wait_event_interruptible(gsm->event, - dlci->state == DLCI_CLOSED); - } + /* Free up any link layer users */ mutex_lock(&gsm->mutex); for (i = 0; i < NUM_DLCI; i++) @@ -2519,12 +2535,12 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm, */ if (need_close || need_restart) { - gsm_dlci_begin_close(gsm->dlci[0]); - /* This will timeout if the link is down due to N2 expiring */ - wait_event_interruptible(gsm->event, - gsm->dlci[0]->state == DLCI_CLOSED); - if (signal_pending(current)) - return -EINTR; + int ret; + + ret = gsm_disconnect(gsm); + + if (ret) + return ret; } if (need_restart) gsm_cleanup_mux(gsm); -- cgit v1.2.3 From e2860e1f62f2e87d268403a749ba1f19663ef19f Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Mon, 29 May 2017 19:27:52 +0930 Subject: serial: 8250_of: Add reset support This adds the hooks for an optional reset controller in the 8250 device tree node. Signed-off-by: Joel Stanley Reviewed-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/8250.txt | 1 + drivers/tty/serial/8250/8250_of.c | 10 ++++++++++ 2 files changed, 11 insertions(+) diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 656733949309..419ff6c0a47f 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -47,6 +47,7 @@ Optional properties: property. - tx-threshold: Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. +- resets : phandle + reset specifier pairs Note: * fsl,ns16550: diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 1cbadafc6889..0cf95fddccfc 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -19,11 +19,13 @@ #include #include #include +#include #include "8250.h" struct of_serial_info { struct clk *clk; + struct reset_control *rst; int type; int line; }; @@ -132,6 +134,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev, } } + info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL); + if (IS_ERR(info->rst)) + goto out; + ret = reset_control_deassert(info->rst); + if (ret) + goto out; + port->type = type; port->uartclk = clk; port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP @@ -229,6 +238,7 @@ static int of_platform_serial_remove(struct platform_device *ofdev) serial8250_unregister_port(info->line); + reset_control_assert(info->rst); if (info->clk) clk_disable_unprepare(info->clk); kfree(info); -- cgit v1.2.3 From 094094a9373fbea80ec00714eed5c24f6fd39ecf Mon Sep 17 00:00:00 2001 From: Nava kishore Manne Date: Fri, 26 May 2017 13:13:18 +0200 Subject: serial: uartps: Fix kernel doc warnings This patch fixes the kernel doc warnings in the driver. Signed-off-by: Nava kishore Manne Signed-off-by: Michal Simek Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index b5b77ba3ac65..fde55dcdea5a 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -186,6 +186,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); * @pclk: APB clock * @baud: Current baud rate * @clk_rate_change_nb: Notifier block for clock changes + * @quirks: Flags for RXBS support. */ struct cdns_uart { struct uart_port *port; -- cgit v1.2.3 From cc1e66f92bf52abfcb55bbb8d6f48fa7a922b7ce Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Sat, 3 Jun 2017 09:35:05 +0200 Subject: vt: use copy_from/to_user instead of __get/put_user for scrnmap ioctls Linus wants to get rid of these functions, and these uses are especially egregious: they copy a big linear array element by element. Signed-off-by: Adam Borowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/consolemap.c | 31 +++++++------------------------ 1 file changed, 7 insertions(+), 24 deletions(-) diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 1f6e17fc3fb0..1361f2a8b832 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -322,15 +322,13 @@ int con_set_trans_old(unsigned char __user * arg) { int i; unsigned short inbuf[E_TABSZ]; + unsigned char ubuf[E_TABSZ]; - if (!access_ok(VERIFY_READ, arg, E_TABSZ)) + if (copy_from_user(ubuf, arg, E_TABSZ)) return -EFAULT; - for (i = 0; i < E_TABSZ ; i++) { - unsigned char uc; - __get_user(uc, arg+i); - inbuf[i] = UNI_DIRECT_BASE | uc; - } + for (i = 0; i < E_TABSZ ; i++) + inbuf[i] = UNI_DIRECT_BASE | ubuf[i]; console_lock(); memcpy(translations[USER_MAP], inbuf, sizeof(inbuf)); @@ -345,9 +343,6 @@ int con_get_trans_old(unsigned char __user * arg) unsigned short *p = translations[USER_MAP]; unsigned char outbuf[E_TABSZ]; - if (!access_ok(VERIFY_WRITE, arg, E_TABSZ)) - return -EFAULT; - console_lock(); for (i = 0; i < E_TABSZ ; i++) { @@ -356,22 +351,16 @@ int con_get_trans_old(unsigned char __user * arg) } console_unlock(); - for (i = 0; i < E_TABSZ ; i++) - __put_user(outbuf[i], arg+i); - return 0; + return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0; } int con_set_trans_new(ushort __user * arg) { - int i; unsigned short inbuf[E_TABSZ]; - if (!access_ok(VERIFY_READ, arg, E_TABSZ*sizeof(unsigned short))) + if (copy_from_user(inbuf, arg, sizeof(inbuf))) return -EFAULT; - for (i = 0; i < E_TABSZ ; i++) - __get_user(inbuf[i], arg+i); - console_lock(); memcpy(translations[USER_MAP], inbuf, sizeof(inbuf)); update_user_maps(); @@ -381,19 +370,13 @@ int con_set_trans_new(ushort __user * arg) int con_get_trans_new(ushort __user * arg) { - int i; unsigned short outbuf[E_TABSZ]; - if (!access_ok(VERIFY_WRITE, arg, E_TABSZ*sizeof(unsigned short))) - return -EFAULT; - console_lock(); memcpy(outbuf, translations[USER_MAP], sizeof(outbuf)); console_unlock(); - for (i = 0; i < E_TABSZ ; i++) - __put_user(outbuf[i], arg+i); - return 0; + return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0; } /* -- cgit v1.2.3 From 6987dc8a70976561d22450b5858fc9767788cc1c Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Sat, 3 Jun 2017 09:35:06 +0200 Subject: vt: fix unchecked __put_user() in tioclinux ioctls Only read access is checked before this call. Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future. If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs. Signed-off-by: Adam Borowski CC: stable@vger.kernel.org # v3.7- Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 9c9945284bcf..bacc48b0b4b8 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2709,13 +2709,13 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) * related to the kernel should not use this. */ data = vt_get_shift_state(); - ret = __put_user(data, p); + ret = put_user(data, p); break; case TIOCL_GETMOUSEREPORTING: console_lock(); /* May be overkill */ data = mouse_reporting(); console_unlock(); - ret = __put_user(data, p); + ret = put_user(data, p); break; case TIOCL_SETVESABLANK: console_lock(); @@ -2724,7 +2724,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) break; case TIOCL_GETKMSGREDIRECT: data = vt_get_kmsg_redirect(); - ret = __put_user(data, p); + ret = put_user(data, p); break; case TIOCL_SETKMSGREDIRECT: if (!capable(CAP_SYS_ADMIN)) { -- cgit v1.2.3 From 915f0a8d2884d05538ae5c06e09f40d364fa2c3f Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Sat, 3 Jun 2017 09:35:07 +0200 Subject: vt: use copy_to_user instead of __put_user in GIO_UNIMAP ioctl A nice big linear transfer, no need to flip stac/PAN/etc every half-entry. Also, yay __put_user() after checking only read. Signed-off-by: Adam Borowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/consolemap.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 1361f2a8b832..c6a692f63a9b 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -740,11 +740,11 @@ EXPORT_SYMBOL(con_copy_unimap); */ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list) { - int i, j, k; + int i, j, k, ret = 0; ushort ect; u16 **p1, *p2; struct uni_pagedir *p; - struct unipair *unilist, *plist; + struct unipair *unilist; unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL); if (!unilist) @@ -775,13 +775,11 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni } } console_unlock(); - for (i = min(ect, ct), plist = unilist; i; i--, list++, plist++) { - __put_user(plist->unicode, &list->unicode); - __put_user(plist->fontpos, &list->fontpos); - } - __put_user(ect, uct); + if (copy_to_user(list, unilist, min(ect, ct) * sizeof(struct unipair))) + ret = -EFAULT; + put_user(ect, uct); kfree(unilist); - return ((ect <= ct) ? 0 : -ENOMEM); + return ret ? ret : (ect <= ct) ? 0 : -ENOMEM; } /* -- cgit v1.2.3 From 4f1be1b5d9aaef9c887140de5f2b9c2a989577d8 Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Sat, 3 Jun 2017 09:35:08 +0200 Subject: vt: use memdup_user in PIO_UNIMAP ioctl Again, a nice linear transfer that simplifies the code. Signed-off-by: Adam Borowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/consolemap.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index c6a692f63a9b..a5f88cf0f61d 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -540,14 +540,9 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) if (!ct) return 0; - unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL); - if (!unilist) - return -ENOMEM; - - for (i = ct, plist = unilist; i; i--, plist++, list++) { - __get_user(plist->unicode, &list->unicode); - __get_user(plist->fontpos, &list->fontpos); - } + unilist = memdup_user(list, ct * sizeof(struct unipair)); + if (IS_ERR(unilist)) + return PTR_ERR(unilist); console_lock(); -- cgit v1.2.3 From f8564c93e0907651e21d586920e629227bb0d024 Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Sat, 3 Jun 2017 09:35:09 +0200 Subject: vt: drop access_ok() calls in unimap ioctls Done by copy_{from,to}_user(). Signed-off-by: Adam Borowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt_ioctl.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 0cbfe1ff6f6c..96d389cb506c 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -266,10 +266,6 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ if (copy_from_user(&tmp, user_ud, sizeof tmp)) return -EFAULT; - if (tmp.entries) - if (!access_ok(VERIFY_WRITE, tmp.entries, - tmp.entry_ct*sizeof(struct unipair))) - return -EFAULT; switch (cmd) { case PIO_UNIMAP: if (!perm) @@ -1170,10 +1166,6 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud, if (copy_from_user(&tmp, user_ud, sizeof tmp)) return -EFAULT; tmp_entries = compat_ptr(tmp.entries); - if (tmp_entries) - if (!access_ok(VERIFY_WRITE, tmp_entries, - tmp.entry_ct*sizeof(struct unipair))) - return -EFAULT; switch (cmd) { case PIO_UNIMAP: if (!perm) -- cgit v1.2.3 From 1c65a879cc494af8bf20eb47996e751034a53199 Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Sat, 3 Jun 2017 09:08:25 +0200 Subject: vt: fix \e[2m using the wrong placeholder color on graphical consoles Only vgacon and sisusbcon did it right, the rest (via generic code) tried underline (usually cyan). Signed-off-by: Adam Borowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index bacc48b0b4b8..2ebaba16f785 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -425,7 +425,7 @@ static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink, else if (_underline) a = (a & 0xf0) | vc->vc_ulcolor; else if (_intensity == 0) - a = (a & 0xf0) | vc->vc_ulcolor; + a = (a & 0xf0) | vc->vc_halfcolor; if (_reverse) a = ((a) & 0x88) | ((((a) >> 4) | ((a) << 4)) & 0x77); if (_blink) -- cgit v1.2.3 From 72ce5732eeca023abb04e40eb77a6bc1169d9b9d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 7 Jun 2017 18:19:31 +0300 Subject: tty/serial: atmel: Remove AVR32 bits from the driver AVR32 is gone. Now it's time to clean up the driver by removing leftovers that was used by AVR32 related code. Signed-off-by: Andy Shevchenko Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- drivers/tty/serial/Kconfig | 16 ++++++++-------- drivers/tty/serial/atmel_serial.c | 20 +------------------- include/uapi/linux/serial_core.h | 2 +- 4 files changed, 11 insertions(+), 29 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7a28acd7f525..10c6faf7c3b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8438,7 +8438,7 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git S: Supported F: arch/microblaze/ -MICROCHIP / ATMEL AT91 / AT32 SERIAL DRIVER +MICROCHIP / ATMEL AT91 SERIAL DRIVER M: Richard Genoud S: Maintained F: drivers/tty/serial/atmel_serial.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5c8850f7a2a0..07812a7ea2a4 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -114,32 +114,32 @@ config SERIAL_SB1250_DUART_CONSOLE If unsure, say Y. config SERIAL_ATMEL - bool "AT91 / AT32 on-chip serial port support" + bool "AT91 on-chip serial port support" depends on HAS_DMA - depends on ARCH_AT91 || AVR32 || COMPILE_TEST + depends on ARCH_AT91 || COMPILE_TEST select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB help This enables the driver for the on-chip UARTs of the Atmel - AT91 and AT32 processors. + AT91 processors. config SERIAL_ATMEL_CONSOLE - bool "Support for console on AT91 / AT32 serial port" + bool "Support for console on AT91 serial port" depends on SERIAL_ATMEL=y select SERIAL_CORE_CONSOLE help Say Y here if you wish to use an on-chip UART on a Atmel - AT91 or AT32 processor as the system console (the system + AT91 processor as the system console (the system console is the device which receives all kernel messages and warnings and which allows logins in single user mode). config SERIAL_ATMEL_PDC - bool "Support DMA transfers on AT91 / AT32 serial port" + bool "Support DMA transfers on AT91 serial port" depends on SERIAL_ATMEL default y help Say Y here if you wish to use the PDC to do DMA transfers to - and from the Atmel AT91 / AT32 serial port. In order to + and from the Atmel AT91 serial port. In order to actually use DMA transfers, make sure that the use_dma_tx and use_dma_rx members in the atmel_uart_data struct is set appropriately for each port. @@ -152,7 +152,7 @@ config SERIAL_ATMEL_TTYAT bool "Install as device ttyATn instead of ttySn" depends on SERIAL_ATMEL=y help - Say Y here if you wish to have the internal AT91 / AT32 UARTs + Say Y here if you wish to have the internal AT91 UARTs appear as /dev/ttyATn (major 204, minor starting at 154) instead of the normal /dev/ttySn (major 4, minor starting at 64). This is necessary if you also want other UARTs, such as diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index d25f044158ff..a7909a5b60d8 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1,5 +1,5 @@ /* - * Driver for Atmel AT91 / AT32 Serial ports + * Driver for Atmel AT91 Serial ports * Copyright (C) 2003 Rick Bronson * * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. @@ -119,7 +119,6 @@ struct atmel_uart_char { /* * at91: 6 USARTs and one DBGU port (SAM9260) - * avr32: 4 * samx7: 3 USARTs and 5 UARTs */ #define ATMEL_MAX_UART 8 @@ -229,21 +228,6 @@ static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value) __raw_writel(value, port->membase + reg); } -#ifdef CONFIG_AVR32 - -/* AVR32 cannot handle 8 or 16bit I/O accesses but only 32bit I/O accesses */ -static inline u8 atmel_uart_read_char(struct uart_port *port) -{ - return __raw_readl(port->membase + ATMEL_US_RHR); -} - -static inline void atmel_uart_write_char(struct uart_port *port, u8 value) -{ - __raw_writel(value, port->membase + ATMEL_US_THR); -} - -#else - static inline u8 atmel_uart_read_char(struct uart_port *port) { return __raw_readb(port->membase + ATMEL_US_RHR); @@ -254,8 +238,6 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value) __raw_writeb(value, port->membase + ATMEL_US_THR); } -#endif - #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 9ec741b133fe..c34a2a3eeff5 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -83,7 +83,7 @@ /* Parisc type numbers. */ #define PORT_MUX 48 -/* Atmel AT91 / AT32 SoC */ +/* Atmel AT91 SoC */ #define PORT_ATMEL 49 /* Macintosh Zilog type numbers */ -- cgit v1.2.3 From bea8be656185a2808a2f255f4a91ff18215a9d0c Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 2 Jun 2017 09:28:44 +0200 Subject: serial: exar: Leave MPIOs as output for Commtech adapters Commtech adapters apparently need the original setting as outputs, see https://marc.info/?l=linux-gpio&m=149557425201323&w=2. Account for that. Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output") Signed-off-by: Jan Kiszka Reviewed-by: Andy Shevchenko Reviewed-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_exar.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 0a20f7185094..a309bcffffcd 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -170,19 +170,26 @@ pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev, return default_setup(priv, pcidev, idx, offset, port); } -static void setup_gpio(u8 __iomem *p) +static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) { + /* + * The Commtech adapters required the MPIOs to be driven low. The Exar + * devices will export them as GPIOs, so we pre-configure them safely + * as inputs. + */ + u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00; + writeb(0x00, p + UART_EXAR_MPIOINT_7_0); writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); writeb(0x00, p + UART_EXAR_MPIO3T_7_0); writeb(0x00, p + UART_EXAR_MPIOINV_7_0); - writeb(0xff, p + UART_EXAR_MPIOSEL_7_0); + writeb(dir, p + UART_EXAR_MPIOSEL_7_0); writeb(0x00, p + UART_EXAR_MPIOOD_7_0); writeb(0x00, p + UART_EXAR_MPIOINT_15_8); writeb(0x00, p + UART_EXAR_MPIOLVL_15_8); writeb(0x00, p + UART_EXAR_MPIO3T_15_8); writeb(0x00, p + UART_EXAR_MPIOINV_15_8); - writeb(0xff, p + UART_EXAR_MPIOSEL_15_8); + writeb(dir, p + UART_EXAR_MPIOSEL_15_8); writeb(0x00, p + UART_EXAR_MPIOOD_15_8); } @@ -235,7 +242,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, if (idx == 0) { /* Setup Multipurpose Input/Output pins. */ - setup_gpio(p); + setup_gpio(pcidev, p); port->port.private_data = xr17v35x_register_gpio(pcidev); } -- cgit v1.2.3 From 5f0f187fd0cc755cfa7d51b50f68a16fca41c813 Mon Sep 17 00:00:00 2001 From: Aleksa Sarai Date: Sun, 4 Jun 2017 00:15:14 +1000 Subject: tty: add compat_ioctl callbacks In order to avoid future diversions between fs/compat_ioctl.c and drivers/tty/pty.c, define .compat_ioctl callbacks for the relevant tty_operations structs. Since both pty_unix98_ioctl() and pty_bsd_ioctl() are compatible between 32-bit and 64-bit userspace no special translation is required. Signed-off-by: Aleksa Sarai Reviewed-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 22 ++++++++++++++++++++++ fs/compat_ioctl.c | 6 ------ 2 files changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 65799575c666..2a6bd9ae3f8b 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -481,6 +481,16 @@ static int pty_bsd_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } +static long pty_bsd_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + /* + * PTY ioctls don't require any special translation between 32-bit and + * 64-bit userspace, they are already compatible. + */ + return pty_bsd_ioctl(tty, cmd, arg); +} + static int legacy_count = CONFIG_LEGACY_PTY_COUNT; /* * not really modular, but the easiest way to keep compat with existing @@ -502,6 +512,7 @@ static const struct tty_operations master_pty_ops_bsd = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .ioctl = pty_bsd_ioctl, + .compat_ioctl = pty_bsd_compat_ioctl, .cleanup = pty_cleanup, .resize = pty_resize, .remove = pty_remove @@ -609,6 +620,16 @@ static int pty_unix98_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } +static long pty_unix98_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + /* + * PTY ioctls don't require any special translation between 32-bit and + * 64-bit userspace, they are already compatible. + */ + return pty_unix98_ioctl(tty, cmd, arg); +} + /** * ptm_unix98_lookup - find a pty master * @driver: ptm driver @@ -681,6 +702,7 @@ static const struct tty_operations ptm_unix98_ops = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .ioctl = pty_unix98_ioctl, + .compat_ioctl = pty_unix98_compat_ioctl, .resize = pty_resize, .cleanup = pty_cleanup }; diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 6116d5275a3e..112b3e1e20e3 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -866,8 +866,6 @@ COMPATIBLE_IOCTL(TIOCGDEV) COMPATIBLE_IOCTL(TIOCCBRK) COMPATIBLE_IOCTL(TIOCGSID) COMPATIBLE_IOCTL(TIOCGICOUNT) -COMPATIBLE_IOCTL(TIOCGPKT) -COMPATIBLE_IOCTL(TIOCGPTLCK) COMPATIBLE_IOCTL(TIOCGEXCL) /* Little t */ COMPATIBLE_IOCTL(TIOCGETD) @@ -883,16 +881,12 @@ COMPATIBLE_IOCTL(TIOCMGET) COMPATIBLE_IOCTL(TIOCMBIC) COMPATIBLE_IOCTL(TIOCMBIS) COMPATIBLE_IOCTL(TIOCMSET) -COMPATIBLE_IOCTL(TIOCPKT) COMPATIBLE_IOCTL(TIOCNOTTY) COMPATIBLE_IOCTL(TIOCSTI) COMPATIBLE_IOCTL(TIOCOUTQ) COMPATIBLE_IOCTL(TIOCSPGRP) COMPATIBLE_IOCTL(TIOCGPGRP) -COMPATIBLE_IOCTL(TIOCGPTN) -COMPATIBLE_IOCTL(TIOCSPTLCK) COMPATIBLE_IOCTL(TIOCSERGETLSR) -COMPATIBLE_IOCTL(TIOCSIG) #ifdef TIOCSRS485 COMPATIBLE_IOCTL(TIOCSRS485) #endif -- cgit v1.2.3 From 54ebbfb1603415d9953c150535850d30609ef077 Mon Sep 17 00:00:00 2001 From: Aleksa Sarai Date: Sun, 4 Jun 2017 00:15:15 +1000 Subject: tty: add TIOCGPTPEER ioctl When opening the slave end of a PTY, it is not possible for userspace to safely ensure that /dev/pts/$num is actually a slave (in cases where the mount namespace in which devpts was mounted is controlled by an untrusted process). In addition, there are several unresolvable race conditions if userspace were to attempt to detect attacks through stat(2) and other similar methods [in addition it is not clear how userspace could detect attacks involving FUSE]. Resolve this by providing an interface for userpace to safely open the "peer" end of a PTY file descriptor by using the dentry cached by devpts. Since it is not possible to have an open master PTY without having its slave exposed in /dev/pts this interface is safe. This interface currently does not provide a way to get the master pty (since it is not clear whether such an interface is safe or even useful). Cc: Christian Brauner Cc: Valentin Rothberg Signed-off-by: Aleksa Sarai Signed-off-by: Greg Kroah-Hartman --- arch/alpha/include/uapi/asm/ioctls.h | 1 + arch/mips/include/uapi/asm/ioctls.h | 1 + arch/parisc/include/uapi/asm/ioctls.h | 1 + arch/powerpc/include/uapi/asm/ioctls.h | 1 + arch/sh/include/uapi/asm/ioctls.h | 1 + arch/sparc/include/uapi/asm/ioctls.h | 3 +- arch/xtensa/include/uapi/asm/ioctls.h | 1 + drivers/tty/pty.c | 71 ++++++++++++++++++++++++++++++++-- include/uapi/asm-generic/ioctls.h | 1 + 9 files changed, 76 insertions(+), 5 deletions(-) diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h index f30c94ae1bdb..ff67b8373bf7 100644 --- a/arch/alpha/include/uapi/asm/ioctls.h +++ b/arch/alpha/include/uapi/asm/ioctls.h @@ -100,6 +100,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h index 740219c2c894..68e19b689a00 100644 --- a/arch/mips/include/uapi/asm/ioctls.h +++ b/arch/mips/include/uapi/asm/ioctls.h @@ -91,6 +91,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ /* I hope the range from 0x5480 on is free ... */ #define TIOCSCTTY 0x5480 /* become controlling tty */ diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h index b6572f051b67..674c68a5bbd0 100644 --- a/arch/parisc/include/uapi/asm/ioctls.h +++ b/arch/parisc/include/uapi/asm/ioctls.h @@ -60,6 +60,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 diff --git a/arch/powerpc/include/uapi/asm/ioctls.h b/arch/powerpc/include/uapi/asm/ioctls.h index 49a25796a61a..bfd609a3e928 100644 --- a/arch/powerpc/include/uapi/asm/ioctls.h +++ b/arch/powerpc/include/uapi/asm/ioctls.h @@ -100,6 +100,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h index c9903e56ccf4..eec7901e9e65 100644 --- a/arch/sh/include/uapi/asm/ioctls.h +++ b/arch/sh/include/uapi/asm/ioctls.h @@ -93,6 +93,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ #define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ diff --git a/arch/sparc/include/uapi/asm/ioctls.h b/arch/sparc/include/uapi/asm/ioctls.h index 06b3f6c3bb9a..6d27398632ea 100644 --- a/arch/sparc/include/uapi/asm/ioctls.h +++ b/arch/sparc/include/uapi/asm/ioctls.h @@ -27,7 +27,7 @@ #define TIOCGRS485 _IOR('T', 0x41, struct serial_rs485) #define TIOCSRS485 _IOWR('T', 0x42, struct serial_rs485) -/* Note that all the ioctls that are not available in Linux have a +/* Note that all the ioctls that are not available in Linux have a * double underscore on the front to: a) avoid some programs to * think we support some ioctls under Linux (autoconfiguration stuff) */ @@ -88,6 +88,7 @@ #define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */ #define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */ #define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */ +#define TIOCGPTPEER _IOR('t', 137, int) /* Safely open the slave */ /* Little f */ #define FIOCLEX _IO('f', 1) diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h index 518954e74e6d..98b004e24e85 100644 --- a/arch/xtensa/include/uapi/asm/ioctls.h +++ b/arch/xtensa/include/uapi/asm/ioctls.h @@ -105,6 +105,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define TIOCSERCONFIG _IO('T', 83) #define TIOCSERGWILD _IOR('T', 84, int) diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 2a6bd9ae3f8b..d1399aac05a1 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -24,6 +24,9 @@ #include #include #include +#include +#include +#include #undef TTY_DEBUG_HANGUP #ifdef TTY_DEBUG_HANGUP @@ -66,8 +69,13 @@ static void pty_close(struct tty_struct *tty, struct file *filp) #ifdef CONFIG_UNIX98_PTYS if (tty->driver == ptm_driver) { mutex_lock(&devpts_mutex); - if (tty->link->driver_data) - devpts_pty_kill(tty->link->driver_data); + if (tty->link->driver_data) { + struct path *path = tty->link->driver_data; + + devpts_pty_kill(path->dentry); + path_put(path); + kfree(path); + } mutex_unlock(&devpts_mutex); } #endif @@ -440,6 +448,48 @@ err: return retval; } +/** + * pty_open_peer - open the peer of a pty + * @tty: the peer of the pty being opened + * + * Open the cached dentry in tty->link, providing a safe way for userspace + * to get the slave end of a pty (where they have the master fd and cannot + * access or trust the mount namespace /dev/pts was mounted inside). + */ +static struct file *pty_open_peer(struct tty_struct *tty, int flags) +{ + if (tty->driver->subtype != PTY_TYPE_MASTER) + return ERR_PTR(-EIO); + return dentry_open(tty->link->driver_data, flags, current_cred()); +} + +static int pty_get_peer(struct tty_struct *tty, int flags) +{ + int fd = -1; + struct file *filp = NULL; + int retval = -EINVAL; + + fd = get_unused_fd_flags(0); + if (fd < 0) { + retval = fd; + goto err; + } + + filp = pty_open_peer(tty, flags); + if (IS_ERR(filp)) { + retval = PTR_ERR(filp); + goto err_put; + } + + fd_install(fd, filp); + return fd; + +err_put: + put_unused_fd(fd); +err: + return retval; +} + static void pty_cleanup(struct tty_struct *tty) { tty_port_put(tty->port); @@ -613,6 +663,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty, return pty_get_pktmode(tty, (int __user *)arg); case TIOCGPTN: /* Get PT Number */ return put_user(tty->index, (unsigned int __user *)arg); + case TIOCGPTPEER: /* Open the other end */ + return pty_get_peer(tty, (int) arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); } @@ -740,6 +792,7 @@ static int ptmx_open(struct inode *inode, struct file *filp) { struct pts_fs_info *fsi; struct tty_struct *tty; + struct path *pts_path; struct dentry *dentry; int retval; int index; @@ -793,16 +846,26 @@ static int ptmx_open(struct inode *inode, struct file *filp) retval = PTR_ERR(dentry); goto err_release; } - tty->link->driver_data = dentry; + /* We need to cache a fake path for TIOCGPTPEER. */ + pts_path = kmalloc(sizeof(struct path), GFP_KERNEL); + if (!pts_path) + goto err_release; + pts_path->mnt = filp->f_path.mnt; + pts_path->dentry = dentry; + path_get(pts_path); + tty->link->driver_data = pts_path; retval = ptm_driver->ops->open(tty, filp); if (retval) - goto err_release; + goto err_path_put; tty_debug_hangup(tty, "opening (count=%d)\n", tty->count); tty_unlock(tty); return 0; +err_path_put: + path_put(pts_path); + kfree(pts_path); err_release: tty_unlock(tty); // This will also put-ref the fsi diff --git a/include/uapi/asm-generic/ioctls.h b/include/uapi/asm-generic/ioctls.h index 143dacbb7d9a..06d5f7ddf84e 100644 --- a/include/uapi/asm-generic/ioctls.h +++ b/include/uapi/asm-generic/ioctls.h @@ -77,6 +77,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define FIONCLEX 0x5450 #define FIOCLEX 0x5451 -- cgit v1.2.3 From dc2f7271593dacaf1ce3b0c57dc657c3221e841c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:33 +0200 Subject: serial: rate limit custom-speed deprecation notice Contrary to what a comment claimed, the ASYNC_SPD flags and custom divisor can be set by a non-privileged user so rate limit the deprecation notice as was intended. Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 13bfd5dcffce..f534a40aebde 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -954,11 +954,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, old_custom_divisor != uport->custom_divisor) { /* * If they're setting up a custom divisor or speed, - * instead of clearing it, then bitch about it. No - * need to rate-limit; it's CAP_SYS_ADMIN only. + * instead of clearing it, then bitch about it. */ if (uport->flags & UPF_SPD_MASK) { - dev_notice(uport->dev, + dev_notice_ratelimited(uport->dev, "%s sets custom speed on %s. This is deprecated.\n", current->comm, tty_name(port->tty)); -- cgit v1.2.3 From f3e8ae657e40354cfb1372555f0d700f50f72ba2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:34 +0200 Subject: USB: serial: ftdi_sio: simplify TIOCSSERIAL flag logic Simplify TIOCSSERIAL flag logic somewhat. Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index aba74f817dc6..df5c45a4b1d7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1505,8 +1505,7 @@ static int set_serial_info(struct tty_struct *tty, /* Do error checking and permission checking */ if (!capable(CAP_SYS_ADMIN)) { - if (((new_serial.flags & ~ASYNC_USR_MASK) != - (priv->flags & ~ASYNC_USR_MASK))) { + if ((new_serial.flags ^ priv->flags) & ~ASYNC_USR_MASK) { mutex_unlock(&priv->cfg_lock); return -EPERM; } @@ -1530,8 +1529,7 @@ static int set_serial_info(struct tty_struct *tty, check_and_exit: write_latency_timer(port); - if ((old_priv.flags & ASYNC_SPD_MASK) != - (priv->flags & ASYNC_SPD_MASK)) { + if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK) { if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) tty->alt_speed = 57600; else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) @@ -1543,10 +1541,9 @@ check_and_exit: else tty->alt_speed = 0; } - if (((old_priv.flags & ASYNC_SPD_MASK) != - (priv->flags & ASYNC_SPD_MASK)) || - (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && - (old_priv.custom_divisor != priv->custom_divisor))) { + if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK || + ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + priv->custom_divisor != old_priv.custom_divisor)) { change_speed(tty, port); mutex_unlock(&priv->cfg_lock); } -- cgit v1.2.3 From 83c9a2d1a6ec906649facb009f1ee191c1c03f48 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:35 +0200 Subject: USB: serial: ftdi_sio: remove broken alt-speed handling Remove the broken alt_speed code, and warn when trying to set the line speed using TIOCSSERIAL and SPD flags. The use of SPD flags to set the line speed has been deprecated since v2.1.69 and support for alt_speed (e.g. "warp") has even been removed from TTY core in v3.10 by commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*"), effectively breaking all driver implementations of this except for serial core. Also remove the verbose and outdated comment on how to set baud rates. Note that setting a custom divisor will continue to work with the caveat that 38400 must again be selected every time the divisor is changed since v2.6.24 and commit 669a6db1037e ("USB: ftd_sio: cleanups and updates for new termios work") which started reporting back the actual baud rate used. Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 56 +++++++------------------------------------ 1 file changed, 9 insertions(+), 47 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index df5c45a4b1d7..1cec03799cdf 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1244,42 +1244,13 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, int div_okay = 1; int baud; - /* - * The logic involved in setting the baudrate can be cleanly split into - * 3 steps. - * 1. Standard baud rates are set in tty->termios->c_cflag - * 2. If these are not enough, you can set any speed using alt_speed as - * follows: - * - set tty->termios->c_cflag speed to B38400 - * - set your real speed in tty->alt_speed; it gets ignored when - * alt_speed==0, (or) - * - call TIOCSSERIAL ioctl with (struct serial_struct) set as - * follows: - * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], - * this just sets alt_speed to (HI: 57600, VHI: 115200, - * SHI: 230400, WARP: 460800) - * ** Steps 1, 2 are done courtesy of tty_get_baud_rate - * 3. You can also set baud rate by setting custom divisor as follows - * - set tty->termios->c_cflag speed to B38400 - * - call TIOCSSERIAL ioctl with (struct serial_struct) set as - * follows: - * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST - * o custom_divisor set to baud_base / your_new_baudrate - * ** Step 3 is done courtesy of code borrowed from serial.c - * I should really spend some time and separate + move this common - * code to serial.c, it is replicated in nearly every serial driver - * you see. - */ - - /* 1. Get the baud rate from the tty settings, this observes - alt_speed hack */ - baud = tty_get_baud_rate(tty); dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud); - /* 2. Observe async-compatible custom_divisor hack, update baudrate - if needed */ - + /* + * Observe deprecated async-compatible custom_divisor hack, update + * baudrate if needed. + */ if (baud == 38400 && ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (priv->custom_divisor)) { @@ -1288,8 +1259,6 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, __func__, priv->custom_divisor, baud); } - /* 3. Convert baudrate to device-specific divisor */ - if (!baud) baud = 9600; switch (priv->chip_type) { @@ -1529,21 +1498,14 @@ static int set_serial_info(struct tty_struct *tty, check_and_exit: write_latency_timer(port); - if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK) { - if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - else - tty->alt_speed = 0; - } if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK || ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && priv->custom_divisor != old_priv.custom_divisor)) { + + /* warn about deprecation unless clearing */ + if (priv->flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n"); + change_speed(tty, port); mutex_unlock(&priv->cfg_lock); } -- cgit v1.2.3 From 8535796579fd08f226878212b39b2682064d41b7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:36 +0200 Subject: tty: simserial: drop unused alt_speed handling This driver was setting the deprecated and broken alt_speed based on port flags, but never provided a means to change the flags or to actually change the speed. Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- arch/ia64/hp/sim/simserial.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index de8cba121013..70d52e9bb575 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -387,19 +387,6 @@ static int activate(struct tty_port *port, struct tty_struct *tty) } state->xmit.head = state->xmit.tail = 0; - - /* - * Set up the tty->alt_speed kludge - */ - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - errout: local_irq_restore(flags); return retval; -- cgit v1.2.3 From 6086380a5576239bd5bfaa175364550b38223ba6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:37 +0200 Subject: tty: amiserial: drop broken alt-speed support Setting an alt_speed using the ASYNC_SPD flags has been deprecated since v2.1.69, and has been broken since v3.10 and commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*") without anyone noticing. Drop the broken alt-speed handling altogether, and add a ratelimited warning about using TIOCCSERIAL to change speed as being deprecated. Note that using ASYNC_SPD_CUST is still supported. Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/amiserial.c | 23 +++-------------------- 1 file changed, 3 insertions(+), 20 deletions(-) diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index dea16bb8c46a..9820e20993db 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -569,18 +569,6 @@ static int startup(struct tty_struct *tty, struct serial_state *info) clear_bit(TTY_IO_ERROR, &tty->flags); info->xmit.head = info->xmit.tail = 0; - /* - * Set up the tty->alt_speed kludge - */ - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - /* * and set the speed of the serial port */ @@ -1084,14 +1072,9 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, check_and_exit: if (tty_port_initialized(port)) { if (change_spd) { - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; + /* warn about deprecation unless clearing */ + if (new_serial.flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); change_speed(tty, state, NULL); } } else -- cgit v1.2.3 From d1b8bc3bc27c2ce7b359ebf084065b2b9468c04d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:38 +0200 Subject: tty: cyclades: drop broken alt-speed support Setting an alt_speed using the ASYNC_SPD flags has been deprecated since v2.1.69, and has been broken since v3.10 and commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*") without anyone noticing. Drop the broken alt-speed handling altogether, and add a ratelimited warning about using TIOCCSERIAL to to change speed as being deprecated. Note that using ASYNC_SPD_CUST is still supported. Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/cyclades.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 104f09c58163..d272bc4e7fb5 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -1975,18 +1975,6 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty) cflag = tty->termios.c_cflag; iflag = tty->termios.c_iflag; - /* - * Set up the tty->alt_speed kludge - */ - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - card = info->card; channel = info->line - card->first_line; @@ -2295,12 +2283,16 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, struct serial_struct __user *new_info) { struct serial_struct new_serial; + int old_flags; int ret; if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) return -EFAULT; mutex_lock(&info->port.mutex); + + old_flags = info->port.flags; + if (!capable(CAP_SYS_ADMIN)) { if (new_serial.close_delay != info->port.close_delay || new_serial.baud_base != info->baud || @@ -2332,6 +2324,11 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, check_and_exit: if (tty_port_initialized(&info->port)) { + if ((new_serial.flags ^ old_flags) & ASYNC_SPD_MASK) { + /* warn about deprecation unless clearing */ + if (new_serial.flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); + } cy_set_line_char(info, tty); ret = 0; } else { -- cgit v1.2.3 From 48a7bd1178048d0b9a8e365272756acbf5cc1ccd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:39 +0200 Subject: tty: rocket: drop broken alt-speed support Setting an alt_speed using the ROCKET_SPD flags has been deprecated since v2.1.69, and has been broken since commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*") without anyone noticing. To make things worse commit 6df3526b6649 ("rocket: first pass at termios reporting") in v2.6.25 started reporting back the actual baud rate used, something which also required 38400 to again be set whenever changing a SPD flag. Drop the broken alt-speed handling altogether, and add a ratelimited warning about using TIOCCSERIAL to change speed as being deprecated. Note that the rocket driver has never supported using a custom divisor (ASYNC_SPD_CUST equivalent). Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/rocket.c | 27 ++++++--------------------- 1 file changed, 6 insertions(+), 21 deletions(-) diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index b51a877da986..20d79a6007d5 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -947,18 +947,6 @@ static int rp_open(struct tty_struct *tty, struct file *filp) tty_port_set_initialized(&info->port, 1); - /* - * Set up the tty->alt_speed kludge - */ - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - tty->alt_speed = 57600; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - tty->alt_speed = 115200; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - tty->alt_speed = 230400; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - tty->alt_speed = 460800; - configure_r_port(tty, info, NULL); if (C_BAUD(tty)) { sSetDTR(cp); @@ -1219,23 +1207,20 @@ static int set_config(struct tty_struct *tty, struct r_port *info, return -EPERM; } info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); - configure_r_port(tty, info, NULL); mutex_unlock(&info->port.mutex); return 0; } + if ((new_serial.flags ^ info->flags) & ROCKET_SPD_MASK) { + /* warn about deprecation, unless clearing */ + if (new_serial.flags & ROCKET_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); + } + info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS)); info->port.close_delay = new_serial.close_delay; info->port.closing_wait = new_serial.closing_wait; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - tty->alt_speed = 57600; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - tty->alt_speed = 115200; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - tty->alt_speed = 230400; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - tty->alt_speed = 460800; mutex_unlock(&info->port.mutex); configure_r_port(tty, info, NULL); -- cgit v1.2.3 From 41b4d581f219ecb56cd52d5eb45f8e7acfbe61ab Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:40 +0200 Subject: tty: ircomm: remove dead and broken ioctl code Remove three ifdefed and broken implementations of TIOCSSERIAL and TIOCGICOUNT, and parity handling in set_termios which had suffered severe bit rot. Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- net/irda/ircomm/ircomm_tty_ioctl.c | 107 +------------------------------------ 1 file changed, 1 insertion(+), 106 deletions(-) diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c index f18070118d05..171c3dee760e 100644 --- a/net/irda/ircomm/ircomm_tty_ioctl.c +++ b/net/irda/ircomm/ircomm_tty_ioctl.c @@ -97,33 +97,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self, self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN; } tty_port_set_check_carrier(&self->port, ~cflag & CLOCAL); -#if 0 - /* - * Set up parity check flag - */ - - if (I_INPCK(self->tty)) - driver->read_status_mask |= LSR_FE | LSR_PE; - if (I_BRKINT(driver->tty) || I_PARMRK(driver->tty)) - driver->read_status_mask |= LSR_BI; - - /* - * Characters to ignore - */ - driver->ignore_status_mask = 0; - if (I_IGNPAR(driver->tty)) - driver->ignore_status_mask |= LSR_PE | LSR_FE; - - if (I_IGNBRK(self->tty)) { - self->ignore_status_mask |= LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(self->tty)) - self->ignore_status_mask |= LSR_OE; - } -#endif + self->settings.data_format = cval; ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE); @@ -271,67 +245,6 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self, static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self, struct serial_struct __user *new_info) { -#if 0 - struct serial_struct new_serial; - struct ircomm_tty_cb old_state, *state; - - if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) - return -EFAULT; - - - state = self - old_state = *self; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != state->settings.data_rate) || - (new_serial.close_delay != state->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (self->flags & ~ASYNC_USR_MASK))) - return -EPERM; - state->flags = ((state->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - self->flags = ((self->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - /* self->custom_divisor = new_serial.custom_divisor; */ - goto check_and_exit; - } - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - if (self->settings.data_rate != new_serial.baud_base) { - self->settings.data_rate = new_serial.baud_base; - ircomm_param_request(self, IRCOMM_DATA_RATE, TRUE); - } - - self->close_delay = new_serial.close_delay * HZ/100; - self->closing_wait = new_serial.closing_wait * HZ/100; - /* self->custom_divisor = new_serial.custom_divisor; */ - - self->flags = ((self->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - check_and_exit: - - if (tty_port_initialized(self)) { - if (((old_state.flags & ASYNC_SPD_MASK) != - (self->flags & ASYNC_SPD_MASK)) || - (old_driver.custom_divisor != driver->custom_divisor)) { - if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - driver->tty->alt_speed = 57600; - if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - driver->tty->alt_speed = 115200; - if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - driver->tty->alt_speed = 230400; - if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - driver->tty->alt_speed = 460800; - ircomm_tty_change_speed(driver); - } - } -#endif return 0; } @@ -367,24 +280,6 @@ int ircomm_tty_ioctl(struct tty_struct *tty, case TIOCGICOUNT: pr_debug("%s(), TIOCGICOUNT not impl!\n", __func__); -#if 0 - save_flags(flags); cli(); - cnow = driver->icount; - restore_flags(flags); - p_cuser = (struct serial_icounter_struct __user *) arg; - if (put_user(cnow.cts, &p_cuser->cts) || - put_user(cnow.dsr, &p_cuser->dsr) || - put_user(cnow.rng, &p_cuser->rng) || - put_user(cnow.dcd, &p_cuser->dcd) || - put_user(cnow.rx, &p_cuser->rx) || - put_user(cnow.tx, &p_cuser->tx) || - put_user(cnow.frame, &p_cuser->frame) || - put_user(cnow.overrun, &p_cuser->overrun) || - put_user(cnow.parity, &p_cuser->parity) || - put_user(cnow.brk, &p_cuser->brk) || - put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - return -EFAULT; -#endif return 0; default: ret = -ENOIOCTLCMD; /* ioctls which we must ignore */ -- cgit v1.2.3 From 7b08579f5c2a5c0e94b4a9f298339c2fdf0fcc89 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 6 Jun 2017 12:54:41 +0200 Subject: tty: drop unused alt_speed from tty_struct Drop the now unused alt_speed field from struct tty_struct. Setting an alt_speed using the ASYNC_SPD flags has been deprecated since v2.1.69, and has been broken for all tty drivers but serial-core since v3.10 and commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*") without anyone noticing. Note that serial-core still supports changing speed using TIOCSSERIAL and SPD flags (including "alt-speeds"), but also warns about it being deprecated since pre-git. Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/tty.h b/include/linux/tty.h index eccb4ec30a8a..585cf2b5ca94 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -316,7 +316,6 @@ struct tty_struct { struct tty_struct *link; struct fasync_struct *fasync; - int alt_speed; /* For magic substitution of 38400 bps */ wait_queue_head_t write_wait; wait_queue_head_t read_wait; struct work_struct hangup_work; -- cgit v1.2.3 From 274a5ed6d8ca16f65bccdce95a14ecf29ff81764 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 13 Jun 2017 22:24:38 +0200 Subject: tty/serial: atmel: remove atmel_default_console_device handling atmel_default_console_device was only used by AVR32, in particular arch/avr32/mach-at32ap/at32ap700x.c which is now gone. Remove it from the driver. Signed-off-by: Alexandre Belloni Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 43 --------------------------------------- 1 file changed, 43 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a7909a5b60d8..b8d9f8f06b85 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2443,8 +2443,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, return 0; } -struct platform_device *atmel_default_console_device; /* the serial console device */ - #ifdef CONFIG_SERIAL_ATMEL_CONSOLE static void atmel_console_putchar(struct uart_port *port, int ch) { @@ -2577,47 +2575,6 @@ static struct console atmel_console = { #define ATMEL_CONSOLE_DEVICE (&atmel_console) -/* - * Early console initialization (before VM subsystem initialized). - */ -static int __init atmel_console_init(void) -{ - int ret; - if (atmel_default_console_device) { - struct atmel_uart_data *pdata = - dev_get_platdata(&atmel_default_console_device->dev); - int id = pdata->num; - struct atmel_uart_port *atmel_port = &atmel_ports[id]; - - atmel_port->backup_imr = 0; - atmel_port->uart.line = id; - - add_preferred_console(ATMEL_DEVICENAME, id, NULL); - ret = atmel_init_port(atmel_port, atmel_default_console_device); - if (ret) - return ret; - register_console(&atmel_console); - } - - return 0; -} - -console_initcall(atmel_console_init); - -/* - * Late console initialization. - */ -static int __init atmel_late_console_init(void) -{ - if (atmel_default_console_device - && !(atmel_console.flags & CON_ENABLED)) - register_console(&atmel_console); - - return 0; -} - -core_initcall(atmel_late_console_init); - static inline bool atmel_is_console_port(struct uart_port *port) { return port->cons && port->cons->index == port->line; -- cgit v1.2.3 From 92c8f7c0e109d2fcff607a13dd7c1437d6c9f87a Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 13 Jun 2017 22:24:39 +0200 Subject: tty/serial: atmel: make the driver DT only Now that AVR32 is gone, platform_data are not used to initialize the driver anymore, remove that path from the driver. Also remove the now unused struct atmel_uart_data. Signed-off-by: Alexandre Belloni Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 96 +++++++++++++------------------------ include/linux/platform_data/atmel.h | 10 ---- 2 files changed, 33 insertions(+), 73 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index b8d9f8f06b85..7551cab438ff 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1638,72 +1638,56 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); - - if (np) { - /* DMA/PDC usage specification */ - if (of_property_read_bool(np, "atmel,use-dma-rx")) { - if (of_property_read_bool(np, "dmas")) { - atmel_port->use_dma_rx = true; - atmel_port->use_pdc_rx = false; - } else { - atmel_port->use_dma_rx = false; - atmel_port->use_pdc_rx = true; - } + + /* DMA/PDC usage specification */ + if (of_property_read_bool(np, "atmel,use-dma-rx")) { + if (of_property_read_bool(np, "dmas")) { + atmel_port->use_dma_rx = true; + atmel_port->use_pdc_rx = false; } else { atmel_port->use_dma_rx = false; - atmel_port->use_pdc_rx = false; + atmel_port->use_pdc_rx = true; } + } else { + atmel_port->use_dma_rx = false; + atmel_port->use_pdc_rx = false; + } - if (of_property_read_bool(np, "atmel,use-dma-tx")) { - if (of_property_read_bool(np, "dmas")) { - atmel_port->use_dma_tx = true; - atmel_port->use_pdc_tx = false; - } else { - atmel_port->use_dma_tx = false; - atmel_port->use_pdc_tx = true; - } + if (of_property_read_bool(np, "atmel,use-dma-tx")) { + if (of_property_read_bool(np, "dmas")) { + atmel_port->use_dma_tx = true; + atmel_port->use_pdc_tx = false; } else { atmel_port->use_dma_tx = false; - atmel_port->use_pdc_tx = false; + atmel_port->use_pdc_tx = true; } - } else { - atmel_port->use_pdc_rx = pdata->use_dma_rx; - atmel_port->use_pdc_tx = pdata->use_dma_tx; - atmel_port->use_dma_rx = false; atmel_port->use_dma_tx = false; + atmel_port->use_pdc_tx = false; } - } static void atmel_init_rs485(struct uart_port *port, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); - - if (np) { - struct serial_rs485 *rs485conf = &port->rs485; - u32 rs485_delay[2]; - /* rs485 properties */ - if (of_property_read_u32_array(np, "rs485-rts-delay", - rs485_delay, 2) == 0) { - rs485conf->delay_rts_before_send = rs485_delay[0]; - rs485conf->delay_rts_after_send = rs485_delay[1]; - rs485conf->flags = 0; - } - if (of_get_property(np, "rs485-rx-during-tx", NULL)) - rs485conf->flags |= SER_RS485_RX_DURING_TX; + struct serial_rs485 *rs485conf = &port->rs485; + u32 rs485_delay[2]; - if (of_get_property(np, "linux,rs485-enabled-at-boot-time", - NULL)) - rs485conf->flags |= SER_RS485_ENABLED; - } else { - port->rs485 = pdata->rs485; + /* rs485 properties */ + if (of_property_read_u32_array(np, "rs485-rts-delay", + rs485_delay, 2) == 0) { + rs485conf->delay_rts_before_send = rs485_delay[0]; + rs485conf->delay_rts_after_send = rs485_delay[1]; + rs485conf->flags = 0; } + if (of_get_property(np, "rs485-rx-during-tx", NULL)) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL)) + rs485conf->flags |= SER_RS485_ENABLED; } static void atmel_set_ops(struct uart_port *port) @@ -2385,7 +2369,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, { int ret; struct uart_port *port = &atmel_port->uart; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); atmel_init_property(atmel_port, pdev); atmel_set_ops(port); @@ -2393,24 +2376,17 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, atmel_init_rs485(port, pdev); port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; + port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; port->ops = &atmel_pops; port->fifosize = 1; port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; port->rs485_config = atmel_config_rs485; + port->membase = NULL; memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); - if (pdata && pdata->regs) { - /* Already mapped by setup code */ - port->membase = pdata->regs; - } else { - port->flags |= UPF_IOREMAP; - port->membase = NULL; - } - /* for console, the clock could already be configured */ if (!atmel_port->clk) { atmel_port->clk = clk_get(&pdev->dev, "usart"); @@ -2744,19 +2720,13 @@ static int atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *atmel_port; struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); void *data; int ret = -ENODEV; bool rs485_enabled; BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); - if (np) - ret = of_alias_get_id(np, "serial"); - else - if (pdata) - ret = pdata->num; - + ret = of_alias_get_id(np, "serial"); if (ret < 0) /* port id not found in platform data nor device-tree aliases: * auto-enumerate it */ diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 3c8825b67298..d36bc8d17e97 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -9,7 +9,6 @@ #include #include -#include /* Compact Flash */ struct at91_cf_data { @@ -42,15 +41,6 @@ struct atmel_nand_data { bool need_reset_workaround; }; - /* Serial */ -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); -- cgit v1.2.3 From 80b208ed7bd1b54db96a77fe5b78899240a45bda Mon Sep 17 00:00:00 2001 From: Andreas Färber Date: Mon, 19 Jun 2017 03:46:39 +0200 Subject: dt-bindings: serial: Document Actions Semi Owl UARTs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This UART is found on S500 and S900 SoCs. Acked-by: Rob Herring Signed-off-by: Andreas Färber Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/actions,owl-uart.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/actions,owl-uart.txt diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt new file mode 100644 index 000000000000..aa873eada02d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt @@ -0,0 +1,16 @@ +Actions Semi Owl UART + +Required properties: +- compatible : "actions,s500-uart", "actions,owl-uart" for S500 + "actions,s900-uart", "actions,owl-uart" for S900 +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. + + +Example: + + uart3: serial@b0126000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0126000 0x1000>; + interrupts = ; + }; -- cgit v1.2.3 From e36361d70e9729ee2334fcb260014a3ff275c2e0 Mon Sep 17 00:00:00 2001 From: Andreas Färber Date: Mon, 19 Jun 2017 03:46:40 +0200 Subject: tty: serial: Add Actions Semi Owl UART earlycon MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This implements an earlycon for Actions Semi S500/S900 SoCs. Based on LeMaker linux-actions tree. Signed-off-by: Andreas Färber Signed-off-by: Greg Kroah-Hartman --- Documentation/admin-guide/kernel-parameters.txt | 6 ++ drivers/tty/serial/Kconfig | 19 ++++ drivers/tty/serial/Makefile | 1 + drivers/tty/serial/owl-uart.c | 135 ++++++++++++++++++++++++ 4 files changed, 161 insertions(+) create mode 100644 drivers/tty/serial/owl-uart.c diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 15f79c27748d..38496249f8ba 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -945,6 +945,12 @@ must already be setup and configured. Options are not yet supported. + owl, + Start an early, polled-mode console on a serial port + of an Actions Semi SoC, such as S500 or S900, at the + specified address. The serial port must already be + setup and configured. Options are not yet supported. + smh Use ARM semihosting calls for early console. s3c2410, diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 07812a7ea2a4..1f096e2bb398 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1688,6 +1688,25 @@ config SERIAL_MVEBU_CONSOLE and warnings and which allows logins in single user mode) Otherwise, say 'N'. +config SERIAL_OWL + bool "Actions Semi Owl serial port support" + depends on ARCH_ACTIONS || COMPILE_TEST + select SERIAL_CORE + help + This driver is for Actions Semiconductor S500/S900 SoC's UART. + Say 'Y' here if you wish to use the on-board serial port. + Otherwise, say 'N'. + +config SERIAL_OWL_CONSOLE + bool "Console on Actions Semi Owl serial port" + depends on SERIAL_OWL=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + default y + help + Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART + as the system console. Only earlycon is implemented currently. + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 53c03e005132..fe88a75d9a59 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -92,6 +92,7 @@ obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o +obj-$(CONFIG_SERIAL_OWL) += owl-uart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c new file mode 100644 index 000000000000..1b8008797a1b --- /dev/null +++ b/drivers/tty/serial/owl-uart.c @@ -0,0 +1,135 @@ +/* + * Actions Semi Owl family serial console + * + * Copyright 2013 Actions Semi Inc. + * Author: Actions Semi, Inc. + * + * Copyright (c) 2016-2017 Andreas Färber + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define OWL_UART_CTL 0x000 +#define OWL_UART_TXDAT 0x008 +#define OWL_UART_STAT 0x00c + +#define OWL_UART_CTL_TRFS_TX BIT(14) +#define OWL_UART_CTL_EN BIT(15) +#define OWL_UART_CTL_RXIE BIT(18) +#define OWL_UART_CTL_TXIE BIT(19) + +#define OWL_UART_STAT_RIP BIT(0) +#define OWL_UART_STAT_TIP BIT(1) +#define OWL_UART_STAT_TFFU BIT(6) +#define OWL_UART_STAT_TRFL_MASK (0x1f << 11) +#define OWL_UART_STAT_UTBB BIT(17) + +static inline void owl_uart_write(struct uart_port *port, u32 val, unsigned int off) +{ + writel(val, port->membase + off); +} + +static inline u32 owl_uart_read(struct uart_port *port, unsigned int off) +{ + return readl(port->membase + off); +} + +#ifdef CONFIG_SERIAL_OWL_CONSOLE + +static void owl_console_putchar(struct uart_port *port, int ch) +{ + if (!port->membase) + return; + + while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU) + cpu_relax(); + + owl_uart_write(port, ch, OWL_UART_TXDAT); +} + +static void owl_uart_port_write(struct uart_port *port, const char *s, + u_int count) +{ + u32 old_ctl, val; + unsigned long flags; + int locked; + + local_irq_save(flags); + + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else { + spin_lock(&port->lock); + locked = 1; + } + + old_ctl = owl_uart_read(port, OWL_UART_CTL); + val = old_ctl | OWL_UART_CTL_TRFS_TX; + /* disable IRQ */ + val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE); + owl_uart_write(port, val, OWL_UART_CTL); + + uart_console_write(port, s, count, owl_console_putchar); + + /* wait until all contents have been sent out */ + while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TRFL_MASK) + cpu_relax(); + + /* clear IRQ pending */ + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_TIP | OWL_UART_STAT_RIP; + owl_uart_write(port, val, OWL_UART_STAT); + + owl_uart_write(port, old_ctl, OWL_UART_CTL); + + if (locked) + spin_unlock(&port->lock); + + local_irq_restore(flags); +} + +static void owl_uart_early_console_write(struct console *co, + const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + owl_uart_port_write(&dev->port, s, count); +} + +static int __init +owl_uart_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = owl_uart_early_console_write; + + return 0; +} +OF_EARLYCON_DECLARE(owl, "actions,owl-uart", + owl_uart_early_console_setup); + +#endif /* CONFIG_SERIAL_OWL_CONSOLE */ -- cgit v1.2.3 From 7b45fff006dd17ca7752e772bf9d347266e081b1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 16 Jun 2017 09:17:10 +0200 Subject: serial/mpsc: switch to dma_alloc_attrs Use dma_alloc_attrs directly instead of the dma_alloc_noncoherent wrapper. Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mpsc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c index 1a60a2063e75..67ffecc50e42 100644 --- a/drivers/tty/serial/mpsc.c +++ b/drivers/tty/serial/mpsc.c @@ -754,9 +754,10 @@ static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi) if (!dma_set_mask(pi->port.dev, 0xffffffff)) { printk(KERN_ERR "MPSC: Inadequate DMA support\n"); rc = -ENXIO; - } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, + } else if ((pi->dma_region = dma_alloc_attrs(pi->port.dev, MPSC_DMA_ALLOC_SIZE, - &pi->dma_region_p, GFP_KERNEL)) + &pi->dma_region_p, GFP_KERNEL, + DMA_ATTR_NON_CONSISTENT)) == NULL) { printk(KERN_ERR "MPSC: Can't alloc Desc region\n"); rc = -ENOMEM; @@ -771,8 +772,9 @@ static void mpsc_free_ring_mem(struct mpsc_port_info *pi) pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line); if (pi->dma_region) { - dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE, - pi->dma_region, pi->dma_region_p); + dma_free_attrs(pi->port.dev, MPSC_DMA_ALLOC_SIZE, + pi->dma_region, pi->dma_region_p, + DMA_ATTR_NON_CONSISTENT); pi->dma_region = NULL; pi->dma_region_p = (dma_addr_t)NULL; } -- cgit v1.2.3 From 519495431d04acc8bfb681a5455f163c6a14206b Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Thu, 15 Jun 2017 17:08:40 +0530 Subject: serial: sirf: make of_device_ids const of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by work with const of_device_ids. So mark the non-const structs as const. Signed-off-by: Arvind Yadav Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sirfsoc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index e03282d92b59..684cb8dd8050 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -1253,7 +1253,7 @@ next_hrt: return HRTIMER_RESTART; } -static struct of_device_id sirfsoc_uart_ids[] = { +static const struct of_device_id sirfsoc_uart_ids[] = { { .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,}, { .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart}, { .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp}, -- cgit v1.2.3 From 1104321a7b3bb670dc614ffa7958c553e7b3b836 Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Fri, 16 Jun 2017 17:17:14 +0200 Subject: serial: Delete dead code for CIR serial ports Commit e4fda3a04275 ("serial: don't register CIR serial ports") adds a check for PORT_8250_CIR to serial8250_register_8250_port(). But the code isn't needed as the function never takes the branch when the port is CIR serial port. This patch deletes the dead code. Signed-off-by: Matthias Brugger Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 1aab3010fbfa..b5def356af63 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1043,24 +1043,13 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->dl_write) uart->dl_write = up->dl_write; - if (uart->port.type != PORT_8250_CIR) { - if (serial8250_isa_config != NULL) - serial8250_isa_config(0, &uart->port, - &uart->capabilities); - - ret = uart_add_one_port(&serial8250_reg, - &uart->port); - if (ret == 0) - ret = uart->port.line; - } else { - dev_info(uart->port.dev, - "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", - uart->port.iobase, - (unsigned long long)uart->port.mapbase, - uart->port.irq); + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); - ret = 0; - } + ret = uart_add_one_port(&serial8250_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; } mutex_unlock(&serial_mutex); -- cgit v1.2.3 From 45d7b247c606fbbc83dfc96b2d60ac963672d1ca Mon Sep 17 00:00:00 2001 From: Helmut Klein Date: Wed, 14 Jun 2017 10:29:14 +0200 Subject: dt-bindings: serial: Add bindings for the Amlogic Meson UARTs Add the documentation for the device tree binding of Amlogic Meson Serial UART. Signed-off-by: Helmut Klein Signed-off-by: Neil Armstrong Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- .../bindings/serial/amlogic,meson-uart.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt new file mode 100644 index 000000000000..8ff65fa632fd --- /dev/null +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt @@ -0,0 +1,38 @@ +Amlogic Meson SoC UART Serial Interface +======================================= + +The Amlogic Meson SoC UART Serial Interface is present on a large range +of SoCs, and can be present either in the "Always-On" power domain or the +"Everything-Else" power domain. + +The particularity of the "Always-On" Serial Interface is that the hardware +is active since power-on and does not need any clock gating and is usable +as very early serial console. + +Required properties: +- compatible : compatible: value should be different for each SoC family as : + - Meson6 : "amlogic,meson6-uart" + - Meson8 : "amlogic,meson8-uart" + - Meson8b : "amlogic,meson8b-uart" + - GX (GXBB, GXL, GXM) : "amlogic,meson-gx-uart" + eventually followed by : "amlogic,meson-ao-uart" if this UART interface + is in the "Always-On" power domain. +- reg : offset and length of the register set for the device. +- interrupts : identifier to the device interrupt +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock names. +- clocks-names : + * "xtal" for external xtal clock identifier + * "pclk" for the bus core clock, either the clk81 clock or the gate clock + * "baud" for the source of the baudrate generator, can be either the xtal + or the pclk. + +e.g. +uart_A: serial@84c0 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x84c0 0x0 0x14>; + interrupts = ; + /* Use xtal as baud rate clock source */ + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; -- cgit v1.2.3 From 9f60e0e7aea66e87948fcde05fc873988e881c93 Mon Sep 17 00:00:00 2001 From: Helmut Klein Date: Wed, 14 Jun 2017 10:29:15 +0200 Subject: tty/serial: meson_uart: update to stable bindings This patch handle the stable UART bindings but also keeps compatibility with the legacy non-stable bindings until all boards uses them. Reviewed-by: Jerome Brunet Signed-off-by: Helmut Klein Signed-off-by: Neil Armstrong Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/meson_uart.c | 90 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 84 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index c0e34dabadd8..42e4a4c7597f 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -561,8 +561,12 @@ meson_serial_early_console_setup(struct earlycon_device *device, const char *opt device->con->write = meson_serial_early_console_write; return 0; } +/* Legacy bindings, should be removed when no more used */ OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart", meson_serial_early_console_setup); +/* Stable bindings */ +OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart", + meson_serial_early_console_setup); #define MESON_SERIAL_CONSOLE (&meson_serial_console) #else @@ -577,11 +581,76 @@ static struct uart_driver meson_uart_driver = { .cons = MESON_SERIAL_CONSOLE, }; +static inline struct clk *meson_uart_probe_clock(struct device *dev, + const char *id) +{ + struct clk *clk = NULL; + int ret; + + clk = devm_clk_get(dev, id); + if (IS_ERR(clk)) + return clk; + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "couldn't enable clk\n"); + return ERR_PTR(ret); + } + + devm_add_action_or_reset(dev, + (void(*)(void *))clk_disable_unprepare, + clk); + + return clk; +} + +/* + * This function gets clocks in the legacy non-stable DT bindings. + * This code will be remove once all the platforms switch to the + * new DT bindings. + */ +static int meson_uart_probe_clocks_legacy(struct platform_device *pdev, + struct uart_port *port) +{ + struct clk *clk = NULL; + + clk = meson_uart_probe_clock(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + port->uartclk = clk_get_rate(clk); + + return 0; +} + +static int meson_uart_probe_clocks(struct platform_device *pdev, + struct uart_port *port) +{ + struct clk *clk_xtal = NULL; + struct clk *clk_pclk = NULL; + struct clk *clk_baud = NULL; + + clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk"); + if (IS_ERR(clk_pclk)) + return PTR_ERR(clk_pclk); + + clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal"); + if (IS_ERR(clk_xtal)) + return PTR_ERR(clk_xtal); + + clk_baud = meson_uart_probe_clock(&pdev->dev, "baud"); + if (IS_ERR(clk_baud)) + return PTR_ERR(clk_baud); + + port->uartclk = clk_get_rate(clk_baud); + + return 0; +} + static int meson_uart_probe(struct platform_device *pdev) { struct resource *res_mem, *res_irq; struct uart_port *port; - struct clk *clk; int ret = 0; if (pdev->dev.of_node) @@ -607,11 +676,15 @@ static int meson_uart_probe(struct platform_device *pdev) if (!port) return -ENOMEM; - clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) - return PTR_ERR(clk); + /* Use legacy way until all platforms switch to new bindings */ + if (of_device_is_compatible(pdev->dev.of_node, "amlogic,meson-uart")) + ret = meson_uart_probe_clocks_legacy(pdev, port); + else + ret = meson_uart_probe_clocks(pdev, port); + + if (ret) + return ret; - port->uartclk = clk_get_rate(clk); port->iotype = UPIO_MEM; port->mapbase = res_mem->start; port->mapsize = resource_size(res_mem); @@ -651,9 +724,14 @@ static int meson_uart_remove(struct platform_device *pdev) return 0; } - static const struct of_device_id meson_uart_dt_match[] = { + /* Legacy bindings, should be removed when no more used */ { .compatible = "amlogic,meson-uart" }, + /* Stable bindings */ + { .compatible = "amlogic,meson6-uart" }, + { .compatible = "amlogic,meson8-uart" }, + { .compatible = "amlogic,meson8b-uart" }, + { .compatible = "amlogic,meson-gx-uart" }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, meson_uart_dt_match); -- cgit v1.2.3 From cfde770d945f63b8d66eef0246209cea985f0913 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 28 Jun 2017 10:41:25 +0100 Subject: serial: 8250: Fix THRE flag usage for CAP_MINI The BCM2835 MINI UART has non-standard THRE semantics. Conventionally the bit means that the FIFO is empty (although there may still be a byte in the transmit register), but on 2835 it indicates that the FIFO is not full. This causes interrupts after every byte is transmitted, with the FIFO providing some interrupt latency tolerance. A consequence of this difference is that the usual strategy of writing multiple bytes into the TX FIFO after checking THRE once is unsafe. In the worst case of 7 bytes in the FIFO, writing 8 bytes loses all but the first since by then the FIFO is full. There is an HFIFO ("Hidden FIFO") capability that causes the transmit loop to terminate when both THRE and TEMT are set, i.e. when the TX block is completely idle. This is unnecessarily cautious, potentially causing gaps in transmission. Add a new conditional to the transmit loop, predicated on CAP_MINI, that exits when THRE is no longer set (the FIFO is full). This allows the FIFO to fill quickly but subsequent writes are paced by the transmission rate. Signed-off-by: Phil Elwell Acked-by: Eric Anholt Acked-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_port.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 4c620bedfbf4..a5fe0e66c607 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1764,6 +1764,10 @@ void serial8250_tx_chars(struct uart_8250_port *up) if ((up->capabilities & UART_CAP_HFIFO) && (serial_in(up, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY) break; + /* The BCM2835 MINI UART THRE bit is really a not-full bit. */ + if ((up->capabilities & UART_CAP_MINI) && + !(serial_in(up, UART_LSR) & UART_LSR_THRE)) + break; } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) -- cgit v1.2.3 From a1bfb6eb300d008decfbcdf13b0fda536d22dea9 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Tue, 20 Jun 2017 11:12:12 +0530 Subject: serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout DMA RX completion handler for UART is called from a tasklet and hence may be delayed depending on the system load. In meanwhile, there may be RX timeout interrupt which can get serviced first before DMA RX completion handler is executed for the completed transfer. omap_8250_rx_dma_flush() which is called on RX timeout interrupt makes sure that the DMA RX buffer is pushed and then the FIFO is drained and also queues a new DMA request. But, when DMA RX completion handler executes, it will erroneously flush the currently queued DMA transfer which sometimes results in data corruption and double queueing of DMA RX requests. Fix this by checking whether RX completion is for the currently queued transfer or not. And also hold port lock when in DMA completion to avoid race wrt RX timeout handler preempting it. Signed-off-by: Vignesh R Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index d81bac98d190..833771bca0a5 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -786,8 +786,27 @@ unlock: static void __dma_rx_complete(void *param) { - __dma_rx_do_complete(param); - omap_8250_rx_dma(param); + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct dma_tx_state state; + unsigned long flags; + + spin_lock_irqsave(&p->port.lock, flags); + + /* + * If the tx status is not DMA_COMPLETE, then this is a delayed + * completion callback. A previous RX timeout flush would have + * already pushed the data, so exit. + */ + if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) != + DMA_COMPLETE) { + spin_unlock_irqrestore(&p->port.lock, flags); + return; + } + __dma_rx_do_complete(p); + omap_8250_rx_dma(p); + + spin_unlock_irqrestore(&p->port.lock, flags); } static void omap_8250_rx_dma_flush(struct uart_8250_port *p) -- cgit v1.2.3 From 5ac88295fc8e128717e08eca9726549215a2fa70 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 20 Jun 2017 14:12:49 -0300 Subject: serial: imx: Remove unused members from imx_port struct IRDA support is gone since commit afe9cbb1a6ad ("serial: imx: drop support for IRDA"), so remove the remaining irda members from imx_port structure. While at it, also remove 'trcv_delay' which is also unused. Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 92606b1e55bd..cbaf85212074 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -207,9 +207,6 @@ struct imx_port { unsigned int have_rtscts:1; unsigned int have_rtsgpio:1; unsigned int dte_mode:1; - unsigned int irda_inv_rx:1; - unsigned int irda_inv_tx:1; - unsigned short trcv_delay; /* transceiver delay */ struct clk *clk_ipg; struct clk *clk_per; const struct imx_uart_data *devdata; -- cgit v1.2.3 From 6376cd39ea0b9a56c3ddfb8c794b7322a7029b63 Mon Sep 17 00:00:00 2001 From: Nandor Han Date: Wed, 28 Jun 2017 15:59:36 +0200 Subject: serial: imx: Enable RTSD only when needed Currently, this IRQ is always enabled. Some devices might mux these pins to other I/Os, like I2C. This could lead to spurious interrupts. This commit makes this IRQ optional, by using the field have_rtscts. Signed-off-by: Nandor Han Signed-off-by: Romain Perier Reviewed-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index cbaf85212074..e33da75ceac5 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1299,7 +1299,9 @@ static int imx_startup(struct uart_port *port) imx_enable_dma(sport); temp = readl(sport->port.membase + UCR1); - temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; + temp |= UCR1_RRDYEN | UCR1_UARTEN; + if (sport->have_rtscts) + temp |= UCR1_RTSDEN; writel(temp, sport->port.membase + UCR1); -- cgit v1.2.3 From a3015affdf76ef279fbbb3710a220bab7e9ea04b Mon Sep 17 00:00:00 2001 From: Nandor Han Date: Wed, 28 Jun 2017 12:15:14 +0200 Subject: serial: imx-serial - move DMA buffer configuration to DT The size of the DMA buffer can affect the delta time between data being produced and data being consumed. Basically the DMA system will move data to tty buffer when a) DMA buffer is full b) serial line is idle. The situation is visible when producer generates data continuously and there is no possibility for idle line. At this point the DMA buffer is directly affecting the delta time. The patch will add the possibility to configure the DMA buffers in DT, which case by case can be configured separately for every driver instance. The DT configuration is optional and in case missing the driver will use the 4096 buffer with 4 periods (as before), therefore no clients are impacted by this change. Signed-off-by: Nandor Han Signed-off-by: Romain Perier Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/fsl-imx-uart.txt | 2 ++ drivers/tty/serial/imx.c | 25 +++++++++++++++------- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 574c3a2c77d5..e6b572409cf5 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -9,6 +9,7 @@ Optional properties: - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. +- fsl,dma-size : Indicate the size of the DMA buffer and its periods Please check Documentation/devicetree/bindings/serial/serial.txt for the complete list of generic properties. @@ -28,4 +29,5 @@ uart1: serial@73fbc000 { interrupts = <31>; uart-has-rtscts; fsl,dte-mode; + fsl,dma-size = <1024 4>; }; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index e33da75ceac5..9e3162bf3bd1 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -186,6 +186,11 @@ #define UART_NR 8 +/* RX DMA buffer periods */ +#define RX_DMA_PERIODS 4 +#define RX_BUF_SIZE (PAGE_SIZE) + + /* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */ enum imx_uart_type { IMX1_UART, @@ -221,6 +226,7 @@ struct imx_port { struct dma_chan *dma_chan_rx, *dma_chan_tx; struct scatterlist rx_sgl, tx_sgl[2]; void *rx_buf; + unsigned int rx_buf_size; struct circ_buf rx_ring; unsigned int rx_periods; dma_cookie_t rx_cookie; @@ -961,8 +967,6 @@ static void imx_timeout(unsigned long data) } } -#define RX_BUF_SIZE (PAGE_SIZE) - /* * There are two kinds of RX DMA interrupts(such as in the MX6Q): * [1] the RX DMA buffer is full. @@ -1045,9 +1049,6 @@ static void dma_rx_callback(void *data) } } -/* RX DMA buffer periods */ -#define RX_DMA_PERIODS 4 - static int start_rx_dma(struct imx_port *sport) { struct scatterlist *sgl = &sport->rx_sgl; @@ -1058,9 +1059,8 @@ static int start_rx_dma(struct imx_port *sport) sport->rx_ring.head = 0; sport->rx_ring.tail = 0; - sport->rx_periods = RX_DMA_PERIODS; - sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE); + sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size); ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE); if (ret == 0) { dev_err(dev, "DMA mapping error for RX.\n"); @@ -1171,7 +1171,7 @@ static int imx_uart_dma_init(struct imx_port *sport) goto err; } - sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL); + sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL); if (!sport->rx_buf) { ret = -ENOMEM; goto err; @@ -2036,6 +2036,7 @@ static int serial_imx_probe_dt(struct imx_port *sport, { struct device_node *np = pdev->dev.of_node; int ret; + u32 dma_buf_size[2]; sport->devdata = of_device_get_match_data(&pdev->dev); if (!sport->devdata) @@ -2059,6 +2060,14 @@ static int serial_imx_probe_dt(struct imx_port *sport, if (of_get_property(np, "rts-gpios", NULL)) sport->have_rtsgpio = 1; + if (!of_property_read_u32_array(np, "fsl,dma-size", dma_buf_size, 2)) { + sport->rx_buf_size = dma_buf_size[0] * dma_buf_size[1]; + sport->rx_periods = dma_buf_size[1]; + } else { + sport->rx_buf_size = RX_BUF_SIZE; + sport->rx_periods = RX_DMA_PERIODS; + } + return 0; } #else -- cgit v1.2.3 From 0d6fce904452636540949d0babd8fd398002af73 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 13 Jun 2017 10:55:48 +0800 Subject: tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property This is used to dynamically check the SoC specific lpuart properies. Currently only the iotype is added, it functions the same as before. With this, new chips with different iotype will be more easily added. Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Stefan Agner Cc: Mingkai Hu Cc: Yangbo Lu Cc: Fugang Duan Cc: Andy Shevchenko Cc: Nikita Yushchenko Signed-off-by: Dong Aisheng Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 47 +++++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 20 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 15df1ba78095..c17a0eab5259 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -236,7 +236,6 @@ struct lpuart_port { struct clk *clk; unsigned int txfifo_size; unsigned int rxfifo_size; - bool lpuart32; bool lpuart_dma_tx_use; bool lpuart_dma_rx_use; @@ -258,13 +257,21 @@ struct lpuart_port { wait_queue_head_t dma_wait; }; +struct lpuart_soc_data { + char iotype; +}; + +static const struct lpuart_soc_data vf_data = { + .iotype = UPIO_MEM, +}; + +static const struct lpuart_soc_data ls_data = { + .iotype = UPIO_MEM32BE, +}; + static const struct of_device_id lpuart_dt_ids[] = { - { - .compatible = "fsl,vf610-lpuart", - }, - { - .compatible = "fsl,ls1021a-lpuart", - }, + { .compatible = "fsl,vf610-lpuart", .data = &vf_data, }, + { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, lpuart_dt_ids); @@ -593,7 +600,7 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) spin_lock_irqsave(&sport->port.lock, flags); if (sport->port.x_char) { - if (sport->lpuart32) + if (sport->port.iotype & UPIO_MEM32BE) lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA); else writeb(sport->port.x_char, sport->port.membase + UARTDR); @@ -601,14 +608,14 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) } if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - if (sport->lpuart32) + if (sport->port.iotype & UPIO_MEM32BE) lpuart32_stop_tx(&sport->port); else lpuart_stop_tx(&sport->port); goto out; } - if (sport->lpuart32) + if (sport->port.iotype & UPIO_MEM32BE) lpuart32_transmit_buffer(sport); else lpuart_transmit_buffer(sport); @@ -1881,12 +1888,12 @@ static int __init lpuart_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else - if (sport->lpuart32) + if (sport->port.iotype & UPIO_MEM32BE) lpuart32_console_get_options(sport, &baud, &parity, &bits); else lpuart_console_get_options(sport, &baud, &parity, &bits); - if (sport->lpuart32) + if (sport->port.iotype & UPIO_MEM32BE) lpuart32_setup_watermark(sport); else lpuart_setup_watermark(sport); @@ -1971,6 +1978,9 @@ static struct uart_driver lpuart_reg = { static int lpuart_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = of_match_device(lpuart_dt_ids, + &pdev->dev); + const struct lpuart_soc_data *sdata = of_id->data; struct device_node *np = pdev->dev.of_node; struct lpuart_port *sport; struct resource *res; @@ -1988,8 +1998,6 @@ static int lpuart_probe(struct platform_device *pdev) return ret; } sport->port.line = ret; - sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart"); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sport->port.membase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(sport->port.membase)) @@ -1998,15 +2006,14 @@ static int lpuart_probe(struct platform_device *pdev) sport->port.mapbase = res->start; sport->port.dev = &pdev->dev; sport->port.type = PORT_LPUART; - sport->port.iotype = UPIO_MEM; ret = platform_get_irq(pdev, 0); if (ret < 0) { dev_err(&pdev->dev, "cannot obtain irq\n"); return ret; } sport->port.irq = ret; - - if (sport->lpuart32) + sport->port.iotype = sdata->iotype; + if (sport->port.iotype & UPIO_MEM32BE) sport->port.ops = &lpuart32_pops; else sport->port.ops = &lpuart_pops; @@ -2033,7 +2040,7 @@ static int lpuart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &sport->port); - if (sport->lpuart32) + if (sport->port.iotype & UPIO_MEM32BE) lpuart_reg.cons = LPUART32_CONSOLE; else lpuart_reg.cons = LPUART_CONSOLE; @@ -2086,7 +2093,7 @@ static int lpuart_suspend(struct device *dev) struct lpuart_port *sport = dev_get_drvdata(dev); unsigned long temp; - if (sport->lpuart32) { + if (sport->port.iotype & UPIO_MEM32BE) { /* disable Rx/Tx and interrupts */ temp = lpuart32_read(sport->port.membase + UARTCTRL); temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); @@ -2137,7 +2144,7 @@ static int lpuart_resume(struct device *dev) if (sport->port.suspended && !sport->port.irq_wake) clk_prepare_enable(sport->clk); - if (sport->lpuart32) { + if (sport->port.iotype & UPIO_MEM32BE) { lpuart32_setup_watermark(sport); temp = lpuart32_read(sport->port.membase + UARTCTRL); temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | -- cgit v1.2.3 From a0204f25e15cb5b7a14ffcb0d2f45bfc37939206 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 13 Jun 2017 10:55:49 +0800 Subject: tty: serial: lpuart: refactor lpuart32_{read|write} prototype Due to the original lpuart32_read/write takes no port specific information arguments, it's hard to distinguish port difference within the API. Although it works before, but not suitable anymore when adding more new chips support. So let's convert it to accept a new struct uart_port argument to make it be able to retrieve more port specific information. This is a preparation for the later adding new chips support more easily. No functions changes. Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Stefan Agner Cc: Mingkai Hu Cc: Yangbo Lu Cc: Fugang Duan Cc: Andy Shevchenko Cc: Nikita Yushchenko Signed-off-by: Dong Aisheng Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 123 ++++++++++++++++++++-------------------- 1 file changed, 62 insertions(+), 61 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index c17a0eab5259..32d479b04197 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -279,14 +279,15 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids); /* Forward declare this for the dma callbacks*/ static void lpuart_dma_tx_complete(void *arg); -static u32 lpuart32_read(void __iomem *addr) +static inline u32 lpuart32_read(struct uart_port *port, u32 reg_off) { - return ioread32be(addr); + return ioread32be(port->membase + reg_off); } -static void lpuart32_write(u32 val, void __iomem *addr) +static inline void lpuart32_write(struct uart_port *port, u32 val, + u32 reg_off) { - iowrite32be(val, addr); + iowrite32be(val, port->membase + reg_off); } static void lpuart_stop_tx(struct uart_port *port) @@ -302,9 +303,9 @@ static void lpuart32_stop_tx(struct uart_port *port) { unsigned long temp; - temp = lpuart32_read(port->membase + UARTCTRL); + temp = lpuart32_read(port, UARTCTRL); temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE); - lpuart32_write(temp, port->membase + UARTCTRL); + lpuart32_write(port, temp, UARTCTRL); } static void lpuart_stop_rx(struct uart_port *port) @@ -319,8 +320,8 @@ static void lpuart32_stop_rx(struct uart_port *port) { unsigned long temp; - temp = lpuart32_read(port->membase + UARTCTRL); - lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL); + temp = lpuart32_read(port, UARTCTRL); + lpuart32_write(port, temp & ~UARTCTRL_RE, UARTCTRL); } static void lpuart_dma_tx(struct lpuart_port *sport) @@ -519,14 +520,14 @@ static inline void lpuart32_transmit_buffer(struct lpuart_port *sport) struct circ_buf *xmit = &sport->port.state->xmit; unsigned long txcnt; - txcnt = lpuart32_read(sport->port.membase + UARTWATER); + txcnt = lpuart32_read(&sport->port, UARTWATER); txcnt = txcnt >> UARTWATER_TXCNT_OFF; txcnt &= UARTWATER_COUNT_MASK; while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) { - lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA); + lpuart32_write(&sport->port, xmit->buf[xmit->tail], UARTDATA); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); sport->port.icount.tx++; - txcnt = lpuart32_read(sport->port.membase + UARTWATER); + txcnt = lpuart32_read(&sport->port, UARTWATER); txcnt = txcnt >> UARTWATER_TXCNT_OFF; txcnt &= UARTWATER_COUNT_MASK; } @@ -562,10 +563,10 @@ static void lpuart32_start_tx(struct uart_port *port) struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long temp; - temp = lpuart32_read(port->membase + UARTCTRL); - lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL); + temp = lpuart32_read(port, UARTCTRL); + lpuart32_write(port, temp | UARTCTRL_TIE, UARTCTRL); - if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE) + if (lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE) lpuart32_transmit_buffer(sport); } @@ -588,7 +589,7 @@ static unsigned int lpuart_tx_empty(struct uart_port *port) static unsigned int lpuart32_tx_empty(struct uart_port *port) { - return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ? + return (lpuart32_read(port, UARTSTAT) & UARTSTAT_TC) ? TIOCSER_TEMT : 0; } @@ -601,7 +602,7 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) spin_lock_irqsave(&sport->port.lock, flags); if (sport->port.x_char) { if (sport->port.iotype & UPIO_MEM32BE) - lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA); + lpuart32_write(&sport->port, sport->port.x_char, UARTDATA); else writeb(sport->port.x_char, sport->port.membase + UARTDR); goto out; @@ -701,15 +702,15 @@ static irqreturn_t lpuart32_rxint(int irq, void *dev_id) spin_lock_irqsave(&sport->port.lock, flags); - while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) { + while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) { flg = TTY_NORMAL; sport->port.icount.rx++; /* * to clear the FE, OR, NF, FE, PE flags, * read STAT then read DATA reg */ - sr = lpuart32_read(sport->port.membase + UARTSTAT); - rx = lpuart32_read(sport->port.membase + UARTDATA); + sr = lpuart32_read(&sport->port, UARTSTAT); + rx = lpuart32_read(&sport->port, UARTDATA); rx &= 0x3ff; if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) @@ -776,18 +777,18 @@ static irqreturn_t lpuart32_int(int irq, void *dev_id) struct lpuart_port *sport = dev_id; unsigned long sts, rxcount; - sts = lpuart32_read(sport->port.membase + UARTSTAT); - rxcount = lpuart32_read(sport->port.membase + UARTWATER); + sts = lpuart32_read(&sport->port, UARTSTAT); + rxcount = lpuart32_read(&sport->port, UARTWATER); rxcount = rxcount >> UARTWATER_RXCNT_OFF; if (sts & UARTSTAT_RDRF || rxcount > 0) lpuart32_rxint(irq, dev_id); if ((sts & UARTSTAT_TDRE) && - !(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE)) + !(lpuart32_read(&sport->port, UARTBAUD) & UARTBAUD_TDMAE)) lpuart_txint(irq, dev_id); - lpuart32_write(sts, sport->port.membase + UARTSTAT); + lpuart32_write(&sport->port, sts, UARTSTAT); return IRQ_HANDLED; } @@ -1048,7 +1049,7 @@ static unsigned int lpuart32_get_mctrl(struct uart_port *port) unsigned int temp = 0; unsigned long reg; - reg = lpuart32_read(port->membase + UARTMODIR); + reg = lpuart32_read(port, UARTMODIR); if (reg & UARTMODIR_TXCTSE) temp |= TIOCM_CTS; @@ -1083,7 +1084,7 @@ static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) { unsigned long temp; - temp = lpuart32_read(port->membase + UARTMODIR) & + temp = lpuart32_read(port, UARTMODIR) & ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); if (mctrl & TIOCM_RTS) @@ -1092,7 +1093,7 @@ static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_CTS) temp |= UARTMODIR_TXCTSE; - lpuart32_write(temp, port->membase + UARTMODIR); + lpuart32_write(port, temp, UARTMODIR); } static void lpuart_break_ctl(struct uart_port *port, int break_state) @@ -1111,12 +1112,12 @@ static void lpuart32_break_ctl(struct uart_port *port, int break_state) { unsigned long temp; - temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK; + temp = lpuart32_read(port, UARTCTRL) & ~UARTCTRL_SBK; if (break_state != 0) temp |= UARTCTRL_SBK; - lpuart32_write(temp, port->membase + UARTCTRL); + lpuart32_write(port, temp, UARTCTRL); } static void lpuart_setup_watermark(struct lpuart_port *sport) @@ -1156,24 +1157,24 @@ static void lpuart32_setup_watermark(struct lpuart_port *sport) unsigned long val, ctrl; unsigned long ctrl_saved; - ctrl = lpuart32_read(sport->port.membase + UARTCTRL); + ctrl = lpuart32_read(&sport->port, UARTCTRL); ctrl_saved = ctrl; ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE | UARTCTRL_RIE | UARTCTRL_RE); - lpuart32_write(ctrl, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, ctrl, UARTCTRL); /* enable FIFO mode */ - val = lpuart32_read(sport->port.membase + UARTFIFO); + val = lpuart32_read(&sport->port, UARTFIFO); val |= UARTFIFO_TXFE | UARTFIFO_RXFE; val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH; - lpuart32_write(val, sport->port.membase + UARTFIFO); + lpuart32_write(&sport->port, val, UARTFIFO); /* set the watermark */ val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF); - lpuart32_write(val, sport->port.membase + UARTWATER); + lpuart32_write(&sport->port, val, UARTWATER); /* Restore cr2 */ - lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, ctrl_saved, UARTCTRL); } static void rx_dma_timer_init(struct lpuart_port *sport) @@ -1249,7 +1250,7 @@ static int lpuart32_startup(struct uart_port *port) unsigned long temp; /* determine FIFO size */ - temp = lpuart32_read(sport->port.membase + UARTFIFO); + temp = lpuart32_read(&sport->port, UARTFIFO); sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) & UARTFIFO_FIFOSIZE_MASK) - 1); @@ -1266,10 +1267,10 @@ static int lpuart32_startup(struct uart_port *port) lpuart32_setup_watermark(sport); - temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp = lpuart32_read(&sport->port, UARTCTRL); temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE); temp |= UARTCTRL_ILIE; - lpuart32_write(temp, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, temp, UARTCTRL); spin_unlock_irqrestore(&sport->port.lock, flags); return 0; @@ -1318,10 +1319,10 @@ static void lpuart32_shutdown(struct uart_port *port) spin_lock_irqsave(&port->lock, flags); /* disable Rx/Tx and interrupts */ - temp = lpuart32_read(port->membase + UARTCTRL); + temp = lpuart32_read(port, UARTCTRL); temp &= ~(UARTCTRL_TE | UARTCTRL_RE | UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); - lpuart32_write(temp, port->membase + UARTCTRL); + lpuart32_write(port, temp, UARTCTRL); spin_unlock_irqrestore(&port->lock, flags); @@ -1496,9 +1497,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; unsigned int sbr; - ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL); - bd = lpuart32_read(sport->port.membase + UARTBAUD); - modem = lpuart32_read(sport->port.membase + UARTMODIR); + ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL); + bd = lpuart32_read(&sport->port, UARTBAUD); + modem = lpuart32_read(&sport->port, UARTMODIR); /* * only support CS8 and CS7, and for CS7 must enable PE. * supported mode: @@ -1584,21 +1585,21 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); /* wait transmit engin complete */ - while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) + while (!(lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_TC)) barrier(); /* disable transmit and receive */ - lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), - sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), + UARTCTRL); sbr = sport->port.uartclk / (16 * baud); bd &= ~UARTBAUD_SBR_MASK; bd |= sbr & UARTBAUD_SBR_MASK; bd |= UARTBAUD_BOTHEDGE; bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE); - lpuart32_write(bd, sport->port.membase + UARTBAUD); - lpuart32_write(modem, sport->port.membase + UARTMODIR); - lpuart32_write(ctrl, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, bd, UARTBAUD); + lpuart32_write(&sport->port, modem, UARTMODIR); + lpuart32_write(&sport->port, ctrl, UARTCTRL); /* restore control register */ spin_unlock_irqrestore(&sport->port.lock, flags); @@ -1701,10 +1702,10 @@ static void lpuart_console_putchar(struct uart_port *port, int ch) static void lpuart32_console_putchar(struct uart_port *port, int ch) { - while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)) + while (!(lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE)) barrier(); - lpuart32_write(ch, port->membase + UARTDATA); + lpuart32_write(port, ch, UARTDATA); } static void @@ -1752,18 +1753,18 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count) spin_lock_irqsave(&sport->port.lock, flags); /* first save CR2 and then disable interrupts */ - cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr = old_cr = lpuart32_read(&sport->port, UARTCTRL); cr |= (UARTCTRL_TE | UARTCTRL_RE); cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); - lpuart32_write(cr, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, cr, UARTCTRL); uart_console_write(&sport->port, s, count, lpuart32_console_putchar); /* wait for transmitter finish complete and restore CR2 */ - while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) + while (!(lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_TC)) barrier(); - lpuart32_write(old_cr, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, old_cr, UARTCTRL); if (locked) spin_unlock_irqrestore(&sport->port.lock, flags); @@ -1829,14 +1830,14 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud, unsigned long cr, bd; unsigned int sbr, uartclk, baud_raw; - cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr = lpuart32_read(&sport->port, UARTCTRL); cr &= UARTCTRL_TE | UARTCTRL_RE; if (!cr) return; /* ok, the port was enabled */ - cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr = lpuart32_read(&sport->port, UARTCTRL); *parity = 'n'; if (cr & UARTCTRL_PE) { @@ -1851,7 +1852,7 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud, else *bits = 8; - bd = lpuart32_read(sport->port.membase + UARTBAUD); + bd = lpuart32_read(&sport->port, UARTBAUD); bd &= UARTBAUD_SBR_MASK; sbr = bd; uartclk = clk_get_rate(sport->clk); @@ -2095,9 +2096,9 @@ static int lpuart_suspend(struct device *dev) if (sport->port.iotype & UPIO_MEM32BE) { /* disable Rx/Tx and interrupts */ - temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp = lpuart32_read(&sport->port, UARTCTRL); temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); - lpuart32_write(temp, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, temp, UARTCTRL); } else { /* disable Rx/Tx and interrupts */ temp = readb(sport->port.membase + UARTCR2); @@ -2146,10 +2147,10 @@ static int lpuart_resume(struct device *dev) if (sport->port.iotype & UPIO_MEM32BE) { lpuart32_setup_watermark(sport); - temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp = lpuart32_read(&sport->port, UARTCTRL); temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE); - lpuart32_write(temp, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, temp, UARTCTRL); } else { lpuart_setup_watermark(sport); temp = readb(sport->port.membase + UARTCR2); -- cgit v1.2.3 From f98e1fcd96f95ba20648c122811869a172a36107 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 13 Jun 2017 10:55:50 +0800 Subject: tty: serial: lpuart: add little endian 32 bit register support Use standard port->iotype to distinguish endian difference. Note as we read/write register by checking iotype dynamically, we need to initialize the iotype correctly for earlycon as well to avoid a break. Cc: Greg Kroah-Hartman Cc: Jiri Slaby (supporter:TTY LAYER) Cc: Stefan Agner Cc: Mingkai Hu Cc: Yangbo Lu Cc: Fugang Duan Cc: Andy Shevchenko Cc: Nikita Yushchenko Signed-off-by: Dong Aisheng ChangeLog: v3->v4: * Removed unneeded semicolon catched by 0day Robot. v2->v3: * Instead of using global var, use standard port->iotype to distinguish endian difference. v1->v2: * No changes Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 45 +++++++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 15 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 32d479b04197..ed0bf180ceb4 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -279,15 +279,29 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids); /* Forward declare this for the dma callbacks*/ static void lpuart_dma_tx_complete(void *arg); -static inline u32 lpuart32_read(struct uart_port *port, u32 reg_off) -{ - return ioread32be(port->membase + reg_off); +static inline u32 lpuart32_read(struct uart_port *port, u32 off) +{ + switch (port->iotype) { + case UPIO_MEM32: + return readl(port->membase + off); + case UPIO_MEM32BE: + return ioread32be(port->membase + off); + default: + return 0; + } } static inline void lpuart32_write(struct uart_port *port, u32 val, - u32 reg_off) -{ - iowrite32be(val, port->membase + reg_off); + u32 off) +{ + switch (port->iotype) { + case UPIO_MEM32: + writel(val, port->membase + off); + break; + case UPIO_MEM32BE: + iowrite32be(val, port->membase + off); + break; + } } static void lpuart_stop_tx(struct uart_port *port) @@ -601,7 +615,7 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) spin_lock_irqsave(&sport->port.lock, flags); if (sport->port.x_char) { - if (sport->port.iotype & UPIO_MEM32BE) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_write(&sport->port, sport->port.x_char, UARTDATA); else writeb(sport->port.x_char, sport->port.membase + UARTDR); @@ -609,14 +623,14 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) } if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - if (sport->port.iotype & UPIO_MEM32BE) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_stop_tx(&sport->port); else lpuart_stop_tx(&sport->port); goto out; } - if (sport->port.iotype & UPIO_MEM32BE) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_transmit_buffer(sport); else lpuart_transmit_buffer(sport); @@ -1889,12 +1903,12 @@ static int __init lpuart_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else - if (sport->port.iotype & UPIO_MEM32BE) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_console_get_options(sport, &baud, &parity, &bits); else lpuart_console_get_options(sport, &baud, &parity, &bits); - if (sport->port.iotype & UPIO_MEM32BE) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_setup_watermark(sport); else lpuart_setup_watermark(sport); @@ -1953,6 +1967,7 @@ static int __init lpuart32_early_console_setup(struct earlycon_device *device, if (!device->port.membase) return -ENODEV; + device->port.iotype = UPIO_MEM32BE; device->con->write = lpuart32_early_write; return 0; } @@ -2014,7 +2029,7 @@ static int lpuart_probe(struct platform_device *pdev) } sport->port.irq = ret; sport->port.iotype = sdata->iotype; - if (sport->port.iotype & UPIO_MEM32BE) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) sport->port.ops = &lpuart32_pops; else sport->port.ops = &lpuart_pops; @@ -2041,7 +2056,7 @@ static int lpuart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &sport->port); - if (sport->port.iotype & UPIO_MEM32BE) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart_reg.cons = LPUART32_CONSOLE; else lpuart_reg.cons = LPUART_CONSOLE; @@ -2094,7 +2109,7 @@ static int lpuart_suspend(struct device *dev) struct lpuart_port *sport = dev_get_drvdata(dev); unsigned long temp; - if (sport->port.iotype & UPIO_MEM32BE) { + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) { /* disable Rx/Tx and interrupts */ temp = lpuart32_read(&sport->port, UARTCTRL); temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); @@ -2145,7 +2160,7 @@ static int lpuart_resume(struct device *dev) if (sport->port.suspended && !sport->port.irq_wake) clk_prepare_enable(sport->clk); - if (sport->port.iotype & UPIO_MEM32BE) { + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) { lpuart32_setup_watermark(sport); temp = lpuart32_read(&sport->port, UARTCTRL); temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | -- cgit v1.2.3 From f2422fe43790204b98d3de823c332477b38242f7 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 13 Jun 2017 10:55:51 +0800 Subject: dt-bindings: serial: fsl-lpuart: add i.MX7ULP support The lpuart of imx7ulp is basically the same as ls1021a. It's also 32 bit width register, but unlike ls1021a, it's little endian. Besides that, imx7ulp lpuart has a minor different register layout from ls1021a. Cc: devicetree@vger.kernel.org Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Stefan Agner Cc: Mingkai Hu Cc: Yangbo Lu Acked-by: Rob Herring Acked-by: Fugang Duan Signed-off-by: Dong Aisheng Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/fsl-lpuart.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index c95005efbcb8..a1252a047f78 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -6,6 +6,8 @@ Required properties: on Vybrid vf610 SoC with 8-bit register organization - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated on LS1021A SoC with 32-bit big-endian register organization + - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated + on i.MX7ULP SoC with 32-bit little-endian register organization - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names -- cgit v1.2.3 From 24b1e5f0e83c2aced8096473d20c4cf6c1355f30 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 13 Jun 2017 10:55:52 +0800 Subject: tty: serial: lpuart: add imx7ulp support The lpuart of imx7ulp is basically the same as ls1021a. It's also 32 bit width register, but unlike ls1021a, it's little endian. Besides that, imx7ulp lpuart has a minor different register layout from ls1021a that it has four extra registers (verid, param, global, pincfg) located at the beginning of register map, which are currently not used by the driver and less to be used later. To ease the register difference handling, we add a reg_off member in lpuart_soc_data structure to represent if the normal lpuart32_{read|write} requires plus a offset to hide the issue. Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Stefan Agner Cc: Mingkai Hu Cc: Yangbo Lu Cc: Fugang Duan Signed-off-by: Dong Aisheng Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index ed0bf180ceb4..94863333f48b 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -231,6 +231,9 @@ #define DEV_NAME "ttyLP" #define UART_NR 6 +/* IMX lpuart has four extra unused regs located at the beginning */ +#define IMX_REG_OFF 0x10 + struct lpuart_port { struct uart_port port; struct clk *clk; @@ -259,6 +262,7 @@ struct lpuart_port { struct lpuart_soc_data { char iotype; + u8 reg_off; }; static const struct lpuart_soc_data vf_data = { @@ -269,9 +273,15 @@ static const struct lpuart_soc_data ls_data = { .iotype = UPIO_MEM32BE, }; +static struct lpuart_soc_data imx_data = { + .iotype = UPIO_MEM32, + .reg_off = IMX_REG_OFF, +}; + static const struct of_device_id lpuart_dt_ids[] = { { .compatible = "fsl,vf610-lpuart", .data = &vf_data, }, { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, }, + { .compatible = "fsl,imx7ulp-lpuart", .data = &imx_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, lpuart_dt_ids); @@ -2019,6 +2029,7 @@ static int lpuart_probe(struct platform_device *pdev) if (IS_ERR(sport->port.membase)) return PTR_ERR(sport->port.membase); + sport->port.membase += sdata->reg_off; sport->port.mapbase = res->start; sport->port.dev = &pdev->dev; sport->port.type = PORT_LPUART; -- cgit v1.2.3 From 97d6f353dafa42281dc70a67006c9e40d395796a Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 13 Jun 2017 10:55:53 +0800 Subject: tty: serial: lpuart: add earlycon support for imx7ulp earlycon is executed quite early before the device tree probe, so we need correctly initialize the port membase and iotype for imx7ulp during early console setup before using. Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Stefan Agner Cc: Mingkai Hu Cc: Yangbo Lu Acked-by: Fugang Duan Signed-off-by: Dong Aisheng Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 94863333f48b..a0f2666d30cf 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1982,8 +1982,21 @@ static int __init lpuart32_early_console_setup(struct earlycon_device *device, return 0; } +static int __init lpuart32_imx_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->port.iotype = UPIO_MEM32; + device->port.membase += IMX_REG_OFF; + device->con->write = lpuart32_early_write; + + return 0; +} OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup); EARLYCON_DECLARE(lpuart, lpuart_early_console_setup); EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup); -- cgit v1.2.3 From a6d7514b14a6ea2a3868bdcb2fca7b2410738595 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 13 Jun 2017 10:55:54 +0800 Subject: tty: serial: lpuart: add a more accurate baud rate calculation method On new LPUART versions, the oversampling ratio for the receiver can be changed from 4x (00011) to 32x (11111) which could help us get a more accurate baud rate divider. The idea is to use the best OSR (over-sampling rate) possible. Note, OSR is typically hard-set to 16 in other LPUART instantiations. Loop to find the best OSR value possible, one that generates minimum baud diff iterate through the rest of the supported values of OSR. Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Stefan Agner Cc: Mingkai Hu Cc: Yangbo Lu Acked-by: Fugang Duan Signed-off-by: Dong Aisheng Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 79 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 72 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index a0f2666d30cf..343de8c384b0 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -140,6 +140,8 @@ #define UARTBAUD_SBNS 0x00002000 #define UARTBAUD_SBR 0x00000000 #define UARTBAUD_SBR_MASK 0x1fff +#define UARTBAUD_OSR_MASK 0x1f +#define UARTBAUD_OSR_SHIFT 24 #define UARTSTAT_LBKDIF 0x80000000 #define UARTSTAT_RXEDGIF 0x40000000 @@ -1510,6 +1512,75 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&sport->port.lock, flags); } +static void +lpuart32_serial_setbrg(struct lpuart_port *sport, unsigned int baudrate) +{ + u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp; + u32 clk = sport->port.uartclk; + + /* + * The idea is to use the best OSR (over-sampling rate) possible. + * Note, OSR is typically hard-set to 16 in other LPUART instantiations. + * Loop to find the best OSR value possible, one that generates minimum + * baud_diff iterate through the rest of the supported values of OSR. + * + * Calculation Formula: + * Baud Rate = baud clock / ((OSR+1) × SBR) + */ + baud_diff = baudrate; + osr = 0; + sbr = 0; + + for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) { + /* calculate the temporary sbr value */ + tmp_sbr = (clk / (baudrate * tmp_osr)); + if (tmp_sbr == 0) + tmp_sbr = 1; + + /* + * calculate the baud rate difference based on the temporary + * osr and sbr values + */ + tmp_diff = clk / (tmp_osr * tmp_sbr) - baudrate; + + /* select best values between sbr and sbr+1 */ + tmp = clk / (tmp_osr * (tmp_sbr + 1)); + if (tmp_diff > (baudrate - tmp)) { + tmp_diff = baudrate - tmp; + tmp_sbr++; + } + + if (tmp_diff <= baud_diff) { + baud_diff = tmp_diff; + osr = tmp_osr; + sbr = tmp_sbr; + + if (!baud_diff) + break; + } + } + + /* handle buadrate outside acceptable rate */ + if (baud_diff > ((baudrate / 100) * 3)) + dev_warn(sport->port.dev, + "unacceptable baud rate difference of more than 3%%\n"); + + tmp = lpuart32_read(&sport->port, UARTBAUD); + + if ((osr > 3) && (osr < 8)) + tmp |= UARTBAUD_BOTHEDGE; + + tmp &= ~(UARTBAUD_OSR_MASK << UARTBAUD_OSR_SHIFT); + tmp |= (((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT); + + tmp &= ~UARTBAUD_SBR_MASK; + tmp |= sbr & UARTBAUD_SBR_MASK; + + tmp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE); + + lpuart32_write(&sport->port, tmp, UARTBAUD); +} + static void lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -1519,7 +1590,6 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long ctrl, old_ctrl, bd, modem; unsigned int baud; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - unsigned int sbr; ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL); bd = lpuart32_read(&sport->port, UARTBAUD); @@ -1616,12 +1686,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), UARTCTRL); - sbr = sport->port.uartclk / (16 * baud); - bd &= ~UARTBAUD_SBR_MASK; - bd |= sbr & UARTBAUD_SBR_MASK; - bd |= UARTBAUD_BOTHEDGE; - bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE); - lpuart32_write(&sport->port, bd, UARTBAUD); + lpuart32_serial_setbrg(sport, baud); lpuart32_write(&sport->port, modem, UARTMODIR); lpuart32_write(&sport->port, ctrl, UARTCTRL); /* restore control register */ -- cgit v1.2.3