From 5b0691508aa99d309101a49b4b084dc16b3d7019 Mon Sep 17 00:00:00 2001
From: Andrey Borzenkov <arvidjaar@mail.ru>
Date: Tue, 22 Dec 2009 21:38:44 +0300
Subject: orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled

orinoco_set_key is called from two places both with interrupts disabled
(under orinoco_lock). Use GFP_ATOMIC instead of GFP_KERNEL. Fixes following
warning:

[   77.254109] WARNING: at /home/bor/src/linux-git/kernel/lockdep.c:2465 lockdep_trace_alloc+0x9a/0xa0()
[   77.254109] Hardware name: PORTEGE 4000
[   77.254109] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod loop nvram toshiba cryptomgr aead pcompress crypto_blkcipher michael_mic crypto_hash crypto_algapi orinoco_cs orinoco cfg80211 smsc_ircc2 pcmcia irda toshiba_acpi yenta_socket video i2c_ali1535 backlight rsrc_nonstatic ali_agp pcmcia_core psmouse output crc_ccitt i2c_core alim1535_wdt rfkill sg evdev ohci_hcd agpgart usbcore pata_ali libata reiserfs [last unloaded: scsi_wait_scan]
[   77.254109] Pid: 2296, comm: wpa_supplicant Not tainted 2.6.32-1avb #1
[   77.254109] Call Trace:
[   77.254109]  [<c011f0ad>] warn_slowpath_common+0x6d/0xa0
[   77.254109]  [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0
[   77.254109]  [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0
[   77.254109]  [<c011f0f5>] warn_slowpath_null+0x15/0x20
[   77.254109]  [<c014206a>] lockdep_trace_alloc+0x9a/0xa0
[   77.254109]  [<c018d296>] __kmalloc+0x36/0x130
[   77.254109]  [<dffcb6a8>] ? orinoco_set_key+0x48/0x1c0 [orinoco]
[   77.254109]  [<dffcb6a8>] orinoco_set_key+0x48/0x1c0 [orinoco]
[   77.254109]  [<dffcb9fc>] orinoco_ioctl_set_encodeext+0x1dc/0x2d0 [orinoco]
[   77.254109]  [<c035b117>] ioctl_standard_call+0x207/0x3b0
[   77.254109]  [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco]
[   77.254109]  [<c0307f1f>] ? rtnl_lock+0xf/0x20
[   77.254109]  [<c0307f1f>] ? rtnl_lock+0xf/0x20
[   77.254109]  [<c02fb115>] ? __dev_get_by_name+0x85/0xb0
[   77.254109]  [<c035b616>] wext_handle_ioctl+0x176/0x200
[   77.254109]  [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco]
[   77.254109]  [<c030020f>] dev_ioctl+0x6af/0x730
[   77.254109]  [<c02eec65>] ? move_addr_to_kernel+0x55/0x60
[   77.254109]  [<c02eed59>] ? sys_sendto+0xe9/0x130
[   77.254109]  [<c02ed77e>] sock_ioctl+0x7e/0x250
[   77.254109]  [<c02ed700>] ? sock_ioctl+0x0/0x250
[   77.254109]  [<c019cf4c>] vfs_ioctl+0x1c/0x70
[   77.254109]  [<c019d1fa>] do_vfs_ioctl+0x6a/0x590
[   77.254109]  [<c0178e50>] ? might_fault+0x90/0xa0
[   77.254109]  [<c0178e0a>] ? might_fault+0x4a/0xa0
[   77.254109]  [<c02ef90e>] ? sys_socketcall+0x17e/0x280
[   77.254109]  [<c019d759>] sys_ioctl+0x39/0x60
[   77.254109]  [<c0102e3b>] sysenter_do_call+0x12/0x32
[   77.254109] ---[ end trace 95ef563548d21efd ]---

Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/orinoco/wext.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index 7698fdd6a3a2..31ca241f7753 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -23,7 +23,7 @@
 #define MAX_RID_LEN 1024
 
 /* Helper routine to record keys
- * Do not call from interrupt context */
+ * It is called under orinoco_lock so it may not sleep */
 static int orinoco_set_key(struct orinoco_private *priv, int index,
 			   enum orinoco_alg alg, const u8 *key, int key_len,
 			   const u8 *seq, int seq_len)
@@ -32,14 +32,14 @@ static int orinoco_set_key(struct orinoco_private *priv, int index,
 	kzfree(priv->keys[index].seq);
 
 	if (key_len) {
-		priv->keys[index].key = kzalloc(key_len, GFP_KERNEL);
+		priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC);
 		if (!priv->keys[index].key)
 			goto nomem;
 	} else
 		priv->keys[index].key = NULL;
 
 	if (seq_len) {
-		priv->keys[index].seq = kzalloc(seq_len, GFP_KERNEL);
+		priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC);
 		if (!priv->keys[index].seq)
 			goto free_key;
 	} else
-- 
cgit v1.2.3


From 659c8e5243caf14564155ad8421404f044dd8031 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@linux.intel.com>
Date: Fri, 18 Dec 2009 11:36:49 +0100
Subject: libertas: Remove carrier signaling from the scan code

There is no reason to signal a carrier off when doing a 802.11 scan.

Cc: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/scan.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index c6a6c042b82f..b0b1c7841500 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -567,11 +567,8 @@ int lbs_scan_networks(struct lbs_private *priv, int full_scan)
 	chan_count = lbs_scan_create_channel_list(priv, chan_list);
 
 	netif_stop_queue(priv->dev);
-	netif_carrier_off(priv->dev);
-	if (priv->mesh_dev) {
+	if (priv->mesh_dev)
 		netif_stop_queue(priv->mesh_dev);
-		netif_carrier_off(priv->mesh_dev);
-	}
 
 	/* Prepare to continue an interrupted scan */
 	lbs_deb_scan("chan_count %d, scan_channel %d\n",
@@ -635,16 +632,13 @@ out2:
 	priv->scan_channel = 0;
 
 out:
-	if (priv->connect_status == LBS_CONNECTED) {
-		netif_carrier_on(priv->dev);
-		if (!priv->tx_pending_len)
-			netif_wake_queue(priv->dev);
-	}
-	if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) {
-		netif_carrier_on(priv->mesh_dev);
-		if (!priv->tx_pending_len)
-			netif_wake_queue(priv->mesh_dev);
-	}
+	if (priv->connect_status == LBS_CONNECTED && !priv->tx_pending_len)
+		netif_wake_queue(priv->dev);
+
+	if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED) &&
+	    !priv->tx_pending_len)
+		netif_wake_queue(priv->mesh_dev);
+
 	kfree(chan_list);
 
 	lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
-- 
cgit v1.2.3


From 2e10d330f8d5f039fa1e00baf59435ab0f11c722 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 20 Dec 2009 19:07:09 +0100
Subject: mac80211: fix ibss join with fixed-bssid

When fixed bssid is requested when joining an ibss network, incoming
beacons that match the configured bssid cause mac80211 to create new
sta entries, even before the ibss interface is in joined state.
When that happens, it fails to bring up the interface entirely, because
it checks for existing sta entries before joining.
This patch fixes this bug by refusing to create sta info entries before
the interface is fully operational.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/ibss.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 10d13856f86c..1f2db647bb5c 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -382,6 +382,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
 					u8 *bssid,u8 *addr, u32 supp_rates)
 {
+	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	int band = local->hw.conf.channel->band;
@@ -397,6 +398,9 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
 		return NULL;
 	}
 
+	if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH)
+		return NULL;
+
 	if (compare_ether_addr(bssid, sdata->u.ibss.bssid))
 		return NULL;
 
-- 
cgit v1.2.3


From 242ab7ad689accafd5e87ffd22b85cf1bf7fbbef Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Mon, 21 Dec 2009 22:26:48 -0500
Subject: ath5k: fix SWI calibration interrupt storm

The calibration period is now invoked by triggering a software
interrupt from within the ISR by ath5k_hw_calibration_poll()
instead of via a timer.

However, the calibration interval isn't initialized before
interrupts are enabled, so we can have a situation where an
interrupt occurs before the interval is assigned, so the
interval is actually negative.  As a result, the ISR will
arm a software interrupt to schedule the tasklet, and then
rearm it when the SWI is processed, and so on, leading to a
softlockup at modprobe time.

Move the initialization order around so the calibration interval
is set before interrupts are active.  Another possible fix
is to schedule the tasklet directly from the poll routine,
but I think there are additional plans for the SWI.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/base.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index a4c086f069b1..2a446a938249 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2381,6 +2381,9 @@ ath5k_init(struct ath5k_softc *sc)
 	 */
 	ath5k_stop_locked(sc);
 
+	/* Set PHY calibration interval */
+	ah->ah_cal_intval = ath5k_calinterval;
+
 	/*
 	 * The basic interface to setting the hardware in a good
 	 * state is ``reset''.  On return the hardware is known to
@@ -2408,10 +2411,6 @@ ath5k_init(struct ath5k_softc *sc)
 
 	/* Set ack to be sent at low bit-rates */
 	ath5k_hw_set_ack_bitrate_high(ah, false);
-
-	/* Set PHY calibration inteval */
-	ah->ah_cal_intval = ath5k_calinterval;
-
 	ret = 0;
 done:
 	mmiowb();
-- 
cgit v1.2.3


From 5e31258945f60dff65952575625cac214a75893e Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 23 Dec 2009 00:03:21 +0100
Subject: rt2x00: Add USB ID for Linksys WUSB 600N rev 2.

This is a rt2870 based device.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index af85d18cdbe7..ab95346cf6a3 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -922,6 +922,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Logitec */
 	{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
-- 
cgit v1.2.3


From 671adc93b6472eaa0142a88d096c945f7b07893a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 23 Dec 2009 13:12:04 +0100
Subject: wireless: remove remaining qual code

This removes the remaining users of the rx status
'qual' field and the field itself.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/base.c       |  11 ---
 drivers/net/wireless/iwlwifi/iwl-3945.c     |  10 +-
 drivers/net/wireless/iwlwifi/iwl-3945.h     |   1 -
 drivers/net/wireless/iwlwifi/iwl-rx.c       |  48 +---------
 drivers/net/wireless/iwlwifi/iwl3945-base.c |  41 --------
 drivers/net/wireless/libertas_tf/main.c     |   1 -
 drivers/net/wireless/rtl818x/rtl8180_dev.c  |   1 -
 drivers/net/wireless/zd1211rw/zd_chip.c     | 140 ----------------------------
 drivers/net/wireless/zd1211rw/zd_chip.h     |   3 -
 drivers/net/wireless/zd1211rw/zd_mac.c      |   3 -
 include/net/mac80211.h                      |   2 -
 11 files changed, 4 insertions(+), 257 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 2a446a938249..e63b7c40d0ee 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1903,17 +1903,6 @@ accept:
 		rxs->noise = sc->ah->ah_noise_floor;
 		rxs->signal = rxs->noise + rs.rs_rssi;
 
-		/* An rssi of 35 indicates you should be able use
-		 * 54 Mbps reliably. A more elaborate scheme can be used
-		 * here but it requires a map of SNR/throughput for each
-		 * possible mode used */
-		rxs->qual = rs.rs_rssi * 100 / 35;
-
-		/* rssi can be more than 35 though, anything above that
-		 * should be considered at 100% */
-		if (rxs->qual > 100)
-			rxs->qual = 100;
-
 		rxs->antenna = rs.rs_antenna;
 		rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
 		rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index e413bd35bc41..234891d8cc10 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -681,19 +681,13 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
 		snr = rx_stats_sig_avg / rx_stats_noise_diff;
 		rx_status.noise = rx_status.signal -
 					iwl3945_calc_db_from_ratio(snr);
-		rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
-							 rx_status.noise);
-
-	/* If noise info not available, calculate signal quality indicator (%)
-	 *   using just the dBm signal level. */
 	} else {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
 	}
 
 
-	IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
-			rx_status.signal, rx_status.noise, rx_status.qual,
+	IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n",
+			rx_status.signal, rx_status.noise,
 			rx_stats_sig_avg, rx_stats_noise_diff);
 
 	header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index ecc23ec1f6a4..531fa125f5a6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -222,7 +222,6 @@ struct iwl3945_ibss_seq {
  *
  *****************************************************************************/
 extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm);
 extern void iwl3945_rx_replenish(void *data);
 extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index f5c87e72660a..6f36b6e79f5e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -650,47 +650,6 @@ void iwl_reply_statistics(struct iwl_priv *priv,
 }
 EXPORT_SYMBOL(iwl_reply_statistics);
 
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95)   /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- *   about formulas used below. */
-static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
-	int sig_qual;
-	int degradation = PERFECT_RSSI - rssi_dbm;
-
-	/* If we get a noise measurement, use signal-to-noise ratio (SNR)
-	 * as indicator; formula is (signal dbm - noise dbm).
-	 * SNR at or above 40 is a great signal (100%).
-	 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
-	 * Weakest usable signal is usually 10 - 15 dB SNR. */
-	if (noise_dbm) {
-		if (rssi_dbm - noise_dbm >= 40)
-			return 100;
-		else if (rssi_dbm < noise_dbm)
-			return 0;
-		sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
-	/* Else use just the signal level.
-	 * This formula is a least squares fit of data points collected and
-	 *   compared with a reference system that had a percentage (%) display
-	 *   for signal quality. */
-	} else
-		sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
-			    (15 * RSSI_RANGE + 62 * degradation)) /
-			   (RSSI_RANGE * RSSI_RANGE);
-
-	if (sig_qual > 100)
-		sig_qual = 100;
-	else if (sig_qual < 1)
-		sig_qual = 0;
-
-	return sig_qual;
-}
-
 /* Calc max signal level (dBm) among 3 possible receivers */
 static inline int iwl_calc_rssi(struct iwl_priv *priv,
 				struct iwl_rx_phy_res *rx_resp)
@@ -1101,11 +1060,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 	if (iwl_is_associated(priv) &&
 	    !test_bit(STATUS_SCANNING, &priv->status)) {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.qual = iwl_calc_sig_qual(rx_status.signal,
-							 rx_status.noise);
 	} else {
 		rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-		rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0);
 	}
 
 	/* Reset beacon noise level if not associated. */
@@ -1118,8 +1074,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 		iwl_dbg_report_frame(priv, phy_res, len, header, 1);
 #endif
 	iwl_dbg_log_rx_data_frame(priv, len, header);
-	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
-		rx_status.signal, rx_status.noise, rx_status.qual,
+	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
+		rx_status.signal, rx_status.noise,
 		(unsigned long long)rx_status.mactime);
 
 	/*
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index e5d8fa38432e..f8e4e4b18d02 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1299,47 +1299,6 @@ int iwl3945_calc_db_from_ratio(int sig_ratio)
 	return (int)ratio2dB[sig_ratio];
 }
 
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95)   /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- *   about formulas used below. */
-int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
-	int sig_qual;
-	int degradation = PERFECT_RSSI - rssi_dbm;
-
-	/* If we get a noise measurement, use signal-to-noise ratio (SNR)
-	 * as indicator; formula is (signal dbm - noise dbm).
-	 * SNR at or above 40 is a great signal (100%).
-	 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
-	 * Weakest usable signal is usually 10 - 15 dB SNR. */
-	if (noise_dbm) {
-		if (rssi_dbm - noise_dbm >= 40)
-			return 100;
-		else if (rssi_dbm < noise_dbm)
-			return 0;
-		sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
-	/* Else use just the signal level.
-	 * This formula is a least squares fit of data points collected and
-	 *   compared with a reference system that had a percentage (%) display
-	 *   for signal quality. */
-	} else
-		sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
-			    (15 * RSSI_RANGE + 62 * degradation)) /
-			   (RSSI_RANGE * RSSI_RANGE);
-
-	if (sig_qual > 100)
-		sig_qual = 100;
-	else if (sig_qual < 1)
-		sig_qual = 0;
-
-	return sig_qual;
-}
-
 /**
  * iwl3945_rx_handle - Main entry function for receiving responses from uCode
  *
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 019431d2f8a9..26a1abd5bb03 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -495,7 +495,6 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb)
 	stats.band = IEEE80211_BAND_2GHZ;
 	stats.signal = prxpd->snr;
 	stats.noise = prxpd->nf;
-	stats.qual = prxpd->snr - prxpd->nf;
 	/* Marvell rate index has a hole at value 4 */
 	if (prxpd->rx_rate > 4)
 		--prxpd->rx_rate;
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index a1a3dd15c664..8a40a1439984 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -132,7 +132,6 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 
 			rx_status.antenna = (flags2 >> 15) & 1;
 			/* TODO: improve signal/rssi reporting */
-			rx_status.qual = flags2 & 0xFF;
 			rx_status.signal = (flags2 >> 8) & 0x7F;
 			/* XXX: is this correct? */
 			rx_status.rate_idx = (flags >> 20) & 0xF;
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index dfa1b9bc22c8..7ca95c414fa8 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1325,151 +1325,11 @@ int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates)
 	return r;
 }
 
-static int ofdm_qual_db(u8 status_quality, u8 zd_rate, unsigned int size)
-{
-	static const u16 constants[] = {
-		715, 655, 585, 540, 470, 410, 360, 315,
-		270, 235, 205, 175, 150, 125, 105,  85,
-		 65,  50,  40,  25,  15
-	};
-
-	int i;
-	u32 x;
-
-	/* It seems that their quality parameter is somehow per signal
-	 * and is now transferred per bit.
-	 */
-	switch (zd_rate) {
-	case ZD_OFDM_RATE_6M:
-	case ZD_OFDM_RATE_12M:
-	case ZD_OFDM_RATE_24M:
-		size *= 2;
-		break;
-	case ZD_OFDM_RATE_9M:
-	case ZD_OFDM_RATE_18M:
-	case ZD_OFDM_RATE_36M:
-	case ZD_OFDM_RATE_54M:
-		size *= 4;
-		size /= 3;
-		break;
-	case ZD_OFDM_RATE_48M:
-		size *= 3;
-		size /= 2;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	x = (10000 * status_quality)/size;
-	for (i = 0; i < ARRAY_SIZE(constants); i++) {
-		if (x > constants[i])
-			break;
-	}
-
-	switch (zd_rate) {
-	case ZD_OFDM_RATE_6M:
-	case ZD_OFDM_RATE_9M:
-		i += 3;
-		break;
-	case ZD_OFDM_RATE_12M:
-	case ZD_OFDM_RATE_18M:
-		i += 5;
-		break;
-	case ZD_OFDM_RATE_24M:
-	case ZD_OFDM_RATE_36M:
-		i += 9;
-		break;
-	case ZD_OFDM_RATE_48M:
-	case ZD_OFDM_RATE_54M:
-		i += 15;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return i;
-}
-
-static int ofdm_qual_percent(u8 status_quality, u8 zd_rate, unsigned int size)
-{
-	int r;
-
-	r = ofdm_qual_db(status_quality, zd_rate, size);
-	ZD_ASSERT(r >= 0);
-	if (r < 0)
-		r = 0;
-
-	r = (r * 100)/29;
-	return r <= 100 ? r : 100;
-}
-
-static unsigned int log10times100(unsigned int x)
-{
-	static const u8 log10[] = {
-		  0,
-		  0,   30,   47,   60,   69,   77,   84,   90,   95,  100,
-		104,  107,  111,  114,  117,  120,  123,  125,  127,  130,
-		132,  134,  136,  138,  139,  141,  143,  144,  146,  147,
-		149,  150,  151,  153,  154,  155,  156,  157,  159,  160,
-		161,  162,  163,  164,  165,  166,  167,  168,  169,  169,
-		170,  171,  172,  173,  174,  174,  175,  176,  177,  177,
-		178,  179,  179,  180,  181,  181,  182,  183,  183,  184,
-		185,  185,  186,  186,  187,  188,  188,  189,  189,  190,
-		190,  191,  191,  192,  192,  193,  193,  194,  194,  195,
-		195,  196,  196,  197,  197,  198,  198,  199,  199,  200,
-		200,  200,  201,  201,  202,  202,  202,  203,  203,  204,
-		204,  204,  205,  205,  206,  206,  206,  207,  207,  207,
-		208,  208,  208,  209,  209,  210,  210,  210,  211,  211,
-		211,  212,  212,  212,  213,  213,  213,  213,  214,  214,
-		214,  215,  215,  215,  216,  216,  216,  217,  217,  217,
-		217,  218,  218,  218,  219,  219,  219,  219,  220,  220,
-		220,  220,  221,  221,  221,  222,  222,  222,  222,  223,
-		223,  223,  223,  224,  224,  224,  224,
-	};
-
-	return x < ARRAY_SIZE(log10) ? log10[x] : 225;
-}
-
-enum {
-	MAX_CCK_EVM_DB = 45,
-};
-
-static int cck_evm_db(u8 status_quality)
-{
-	return (20 * log10times100(status_quality)) / 100;
-}
-
-static int cck_snr_db(u8 status_quality)
-{
-	int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality);
-	ZD_ASSERT(r >= 0);
-	return r;
-}
-
-static int cck_qual_percent(u8 status_quality)
-{
-	int r;
-
-	r = cck_snr_db(status_quality);
-	r = (100*r)/17;
-	return r <= 100 ? r : 100;
-}
-
 static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame)
 {
 	return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame);
 }
 
-u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
-	              const struct rx_status *status)
-{
-	return (status->frame_status&ZD_RX_OFDM) ?
-		ofdm_qual_percent(status->signal_quality_ofdm,
-				  zd_rate_from_ofdm_plcp_header(rx_frame),
-			          size) :
-		cck_qual_percent(status->signal_quality_cck);
-}
-
 /**
  * zd_rx_rate - report zd-rate
  * @rx_frame - received frame
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 9fd8f3508d66..f8bbf7d302ae 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -929,9 +929,6 @@ static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval)
 
 struct rx_status;
 
-u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
-	               const struct rx_status *status);
-
 u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status);
 
 struct zd_mc_hash {
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 8a243732c519..cc648efb8ede 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -828,9 +828,6 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 	stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq;
 	stats.band = IEEE80211_BAND_2GHZ;
 	stats.signal = status->signal_strength;
-	stats.qual = zd_rx_qual_percent(buffer,
-		                          length - sizeof(struct rx_status),
-		                          status);
 
 	rate = zd_rx_rate(buffer, status);
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 538d6b761887..0bf369752274 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -547,7 +547,6 @@ enum mac80211_rx_flags {
  *	unspecified depending on the hardware capabilities flags
  *	@IEEE80211_HW_SIGNAL_*
  * @noise: noise when receiving this frame, in dBm.
- * @qual: overall signal quality indication, in percent (0-100).
  * @antenna: antenna used
  * @rate_idx: index of data rate into band's supported rates or MCS index if
  *	HT rates are use (RX_FLAG_HT)
@@ -559,7 +558,6 @@ struct ieee80211_rx_status {
 	int freq;
 	int signal;
 	int noise;
-	int __deprecated qual;
 	int antenna;
 	int rate_idx;
 	int flag;
-- 
cgit v1.2.3


From 3bdb2d48c5f58c781a4099c99044384a23620884 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 23 Dec 2009 13:12:05 +0100
Subject: cfg80211: fix race between deauth and assoc response

Joseph Nahmias reported, in http://bugs.debian.org/562016,
that he was getting the following warning (with some log
around the issue):

  ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1)
  ath0: direct probe responded
  ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1)
  ath0: authenticated
  ath0: associate with AP 00:11:95:77:e0:b0 (try 1)
  ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason=3)
  ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1)
  ath0: RX AssocResp from 00:11:95:77:e0:b0 (capab=0x421 status=0 aid=2)
  ath0: associated
  ------------[ cut here ]------------
  WARNING: at net/wireless/mlme.c:97 cfg80211_send_rx_assoc+0x14d/0x152 [cfg80211]()
  Hardware name: 7658CTO
  ...
  Pid: 761, comm: phy0 Not tainted 2.6.32-trunk-686 #1
  Call Trace:
   [<c1030a5d>] ? warn_slowpath_common+0x5e/0x8a
   [<c1030a93>] ? warn_slowpath_null+0xa/0xc
   [<f86cafc7>] ? cfg80211_send_rx_assoc+0x14d/0x152
  ...
  ath0: link becomes ready
  ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason=3)
  ath0: no IPv6 routers present
  ath0: link is not ready
  ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1)
  ath0: direct probe responded
  ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1)
  ath0: authenticated
  ath0: associate with AP 00:11:95:77:e0:b0 (try 1)
  ath0: RX ReassocResp from 00:11:95:77:e0:b0 (capab=0x421 status=0 aid=2)
  ath0: associated

It is not clear to me how the first "direct probe" here
happens, but this seems to be a race condition, if the
user requests to deauth after requesting assoc, but before
the assoc response is received. In that case, it may
happen that mac80211 tries to report the assoc success to
cfg80211, but gets blocked on the wdev lock that is held
because the user is requesting the deauth.

The result is that we run into a warning. This is mostly
harmless, but maybe cause an unexpected event to be sent
to userspace; we'd send an assoc success event although
userspace was no longer expecting that.

To fix this, remove the warning and check whether the
race happened and in that case abort processing.

Reported-by: Joseph Nahmias <joe@nahmias.net>
Cc: stable@kernel.org
Cc: 562016-quiet@bugs.debian.org
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/mlme.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 1001db4912f7..82e6002c8d67 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -93,7 +93,18 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len)
 			}
 		}
 
-		WARN_ON(!bss);
+		/*
+		 * We might be coming here because the driver reported
+		 * a successful association at the same time as the
+		 * user requested a deauth. In that case, we will have
+		 * removed the BSS from the auth_bsses list due to the
+		 * deauth request when the assoc response makes it. If
+		 * the two code paths acquire the lock the other way
+		 * around, that's just the standard situation of a
+		 * deauth being requested while connected.
+		 */
+		if (!bss)
+			goto out;
 	} else if (wdev->conn) {
 		cfg80211_sme_failed_assoc(wdev);
 		/*
-- 
cgit v1.2.3


From 83bd11a06da8bd119cc517de84b3214df3a7a6d4 Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Wed, 23 Dec 2009 14:04:43 +0100
Subject: ath9k: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 5321f735e5a0..f7af5ea54753 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -96,7 +96,7 @@ static void ath_pci_bt_coex_prep(struct ath_common *common)
 	pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
 }
 
-const static struct ath_bus_ops ath_pci_bus_ops = {
+static const struct ath_bus_ops ath_pci_bus_ops = {
 	.read_cachesize = ath_pci_read_cachesize,
 	.cleanup = ath_pci_cleanup,
 	.eeprom_read = ath_pci_eeprom_read,
-- 
cgit v1.2.3


From 79496738eb896d1658d9f3cca98e474c5f31eea3 Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Wed, 23 Dec 2009 14:18:11 +0100
Subject: iwlwifi: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index fe511cbf012e..b93e49158196 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -150,7 +150,7 @@ static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
 };
 
 /* mbps, mcs */
-const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
+static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
 	{  "1", "BPSK DSSS"},
 	{  "2", "QPSK DSSS"},
 	{"5.5", "BPSK CCK"},
-- 
cgit v1.2.3


From befabac2d8e4925b97c5eebc78ecc4b2079fd9dd Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Wed, 23 Dec 2009 15:23:19 +0200
Subject: wl1271_cmd.c: cleanup char => u8

This is just a clean up and doesn't make a functional difference.  It keeps the
lint checkers happy.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 886a9bc39cc1..c3385b3d246c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -777,7 +777,7 @@ out:
 	return ret;
 }
 
-static int wl1271_build_basic_rates(char *rates, u8 band)
+static int wl1271_build_basic_rates(u8 *rates, u8 band)
 {
 	u8 index = 0;
 
@@ -804,7 +804,7 @@ static int wl1271_build_basic_rates(char *rates, u8 band)
 	return index;
 }
 
-static int wl1271_build_extended_rates(char *rates, u8 band)
+static int wl1271_build_extended_rates(u8 *rates, u8 band)
 {
 	u8 index = 0;
 
-- 
cgit v1.2.3


From 65486c8b30498dd274eea2c542696f22b63fe5b8 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 23 Dec 2009 15:33:35 +0100
Subject: cfg80211: fix error path in cfg80211_wext_siwscan

If there's an invalid channel or SSID, the code leaks
the scan request. Always free the scan request, unless
it was successfully given to the driver.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/scan.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 12dfa62aad18..0c2cbbebca95 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -601,7 +601,7 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 	struct cfg80211_registered_device *rdev;
 	struct wiphy *wiphy;
 	struct iw_scan_req *wreq = NULL;
-	struct cfg80211_scan_request *creq;
+	struct cfg80211_scan_request *creq = NULL;
 	int i, err, n_channels = 0;
 	enum ieee80211_band band;
 
@@ -694,8 +694,10 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 	/* translate "Scan for SSID" request */
 	if (wreq) {
 		if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
-			if (wreq->essid_len > IEEE80211_MAX_SSID_LEN)
-				return -EINVAL;
+			if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) {
+				err = -EINVAL;
+				goto out;
+			}
 			memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len);
 			creq->ssids[0].ssid_len = wreq->essid_len;
 		}
@@ -707,12 +709,15 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 	err = rdev->ops->scan(wiphy, dev, creq);
 	if (err) {
 		rdev->scan_req = NULL;
-		kfree(creq);
+		/* creq will be freed below */
 	} else {
 		nl80211_send_scan_start(rdev, dev);
+		/* creq now owned by driver */
+		creq = NULL;
 		dev_hold(dev);
 	}
  out:
+	kfree(creq);
 	cfg80211_unlock_rdev(rdev);
 	return err;
 }
-- 
cgit v1.2.3


From 3867cf6a8c699846e928e8f5a9f31013708df192 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Wed, 23 Dec 2009 20:03:27 -0500
Subject: ath9k: fix suspend by waking device prior to stop

Ensure the device is awake prior to trying to tell hardware
to stop it. Impact of not doing this is we can likely leave
the device in an undefined state likely causing issues with
suspend and resume. This patch ensures harware is where it
should be prior to suspend.

Cc: stable@kernel.org
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9e68c1a8aef0..2ec7451350f0 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2514,6 +2514,9 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 		return; /* another wiphy still in use */
 	}
 
+	/* Ensure HW is awake when we try to shut it down. */
+	ath9k_ps_wakeup(sc);
+
 	if (ah->btcoex_hw.enabled) {
 		ath9k_hw_btcoex_disable(ah);
 		if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
@@ -2534,6 +2537,9 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 	/* disable HAL and put h/w to sleep */
 	ath9k_hw_disable(ah);
 	ath9k_hw_configpcipowersave(ah, 1, 1);
+	ath9k_ps_restore(sc);
+
+	/* Finally, put the chip in FULL SLEEP mode */
 	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 
 	sc->sc_flags |= SC_OP_INVALID;
-- 
cgit v1.2.3


From 5f70a88f631c3480107853cae12925185eb4c598 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Wed, 23 Dec 2009 20:03:28 -0500
Subject: ath9k: wake hardware for interface IBSS/AP/Mesh removal

When we remove a IBSS/AP/Mesh interface we stop DMA
but to do this we should ensure hardware is on. Awaken
the device prior to these calls. This should ensure
DMA is stopped upon suspend and plain device removal.

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 2ec7451350f0..623ade8960c5 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2653,8 +2653,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
+		ath9k_ps_wakeup(sc);
 		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
 		ath_beacon_return(sc, avp);
+		ath9k_ps_restore(sc);
 	}
 
 	sc->sc_flags &= ~SC_OP_BEACONS;
-- 
cgit v1.2.3


From 8b685ba9de803f210936400612a32a2003f47cd3 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Wed, 23 Dec 2009 20:03:29 -0500
Subject: ath9k: wake hardware during AMPDU TX actions

AMDPDU actions poke hardware for TX operation, as such
we want to turn hardware on for these actions. AMDPU RX operations
do not require hardware on as nothing is done in hardware for
those actions. Without this we cannot guarantee hardware has
been programmed correctly for each AMPDU TX action.

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 623ade8960c5..996eb90263cc 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -3105,15 +3105,21 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 	case IEEE80211_AMPDU_RX_STOP:
 		break;
 	case IEEE80211_AMPDU_TX_START:
+		ath9k_ps_wakeup(sc);
 		ath_tx_aggr_start(sc, sta, tid, ssn);
 		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		ath9k_ps_restore(sc);
 		break;
 	case IEEE80211_AMPDU_TX_STOP:
+		ath9k_ps_wakeup(sc);
 		ath_tx_aggr_stop(sc, sta, tid);
 		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		ath9k_ps_restore(sc);
 		break;
 	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		ath9k_ps_wakeup(sc);
 		ath_tx_aggr_resume(sc, sta, tid);
+		ath9k_ps_restore(sc);
 		break;
 	default:
 		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-- 
cgit v1.2.3


From 5b479a076de091590423a9e6dfc2584126b28761 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 24 Dec 2009 14:04:32 +0100
Subject: ath9k: fix missed error codes in the tx status check
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

My previous change added in:

 commit 815833e7ecf0b9a017315cae6aef4d7cd9517681
    ath9k: fix tx status reporting

was not checking all possible tx error conditions. This could possibly
lead to throughput issues due to slow rate control adaption or missed
retransmissions of failed A-MPDU frames.

This patch adds a mask for all possible error conditions and uses it
in the xmit ok check.

Cc: stable@kernel.org
Reported-by: Björn Smedman <bjorn.smedman@venatech.se>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/mac.h  | 3 +++
 drivers/net/wireless/ath/ath9k/xmit.c | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 0c87771383f0..e185479e295e 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -77,6 +77,9 @@
 #define ATH9K_TXERR_XTXOP          0x08
 #define ATH9K_TXERR_TIMER_EXPIRED  0x10
 #define ATH9K_TX_ACKED		   0x20
+#define ATH9K_TXERR_MASK						\
+	(ATH9K_TXERR_XRETRY | ATH9K_TXERR_FILT | ATH9K_TXERR_FIFO |	\
+	 ATH9K_TXERR_XTXOP | ATH9K_TXERR_TIMER_EXPIRED)
 
 #define ATH9K_TX_BA                0x01
 #define ATH9K_TX_PWRMGMT           0x02
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 1e813bbf474a..fa12b9060b0b 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2072,7 +2072,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 				&txq->axq_q, lastbf->list.prev);
 
 		txq->axq_depth--;
-		txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT);
+		txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_MASK);
 		txq->axq_tx_inprogress = false;
 		spin_unlock_bh(&txq->axq_lock);
 
-- 
cgit v1.2.3


From b98c06b6debfe84c90200143bb1102f312f50a33 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Thu, 24 Dec 2009 15:26:09 -0500
Subject: mac80211: fix race with suspend and dynamic_ps_disable_work

When mac80211 suspends it calls a driver's suspend callback
as a last step and after that the driver assumes no calls will
be made to it until we resume and its start callback is kicked.
If such calls are made, however, suspend can end up throwing
hardware in an unexpected state and making the device unusable
upon resume.

Fix this by preventing mac80211 to schedule dynamic_ps_disable_work
by checking for when mac80211 starts to suspend and starts
quiescing. Frames should be allowed to go through though as
that is part of the quiescing steps and we do not flush the
mac80211 workqueue since it was already done towards the
beginning of suspend cycle.

The other mac80211 issue will be hanled in the next patch.

For further details see refer to the thread:

http://marc.info/?t=126144866100001&r=1&w=2

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/tx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 8834cc93c716..27ceaefd7bc8 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1419,6 +1419,10 @@ static bool need_dynamic_ps(struct ieee80211_local *local)
 	if (!local->ps_sdata)
 		return false;
 
+	/* No point if we're going to suspend */
+	if (local->quiescing)
+		return false;
+
 	return true;
 }
 
-- 
cgit v1.2.3


From 24feda0084722189468a65e20019cdd8ef99702b Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Thu, 24 Dec 2009 15:38:22 -0500
Subject: mac80211: fix propagation of failed hardware reconfigurations

mac80211 does not propagate failed hardware reconfiguration
requests. For suspend and resume this is important due to all
the possible issues that can come out of the suspend <-> resume
cycle. Not propagating the error means cfg80211 will assume
the resume for the device went through fine and mac80211 will
continue on trying to poke at the hardware, enable timers,
queue work, and so on for a device which is completley
unfunctional.

The least we can do is to propagate device start issues and
warn when this occurs upon resume. A side effect of this patch
is we also now propagate the start errors upon harware
reconfigurations (non-suspend), but this should also be desirable
anyway, there is not point in continuing to reconfigure a
device if mac80211 was unable to start the device.

For further details refer to the thread:

http://marc.info/?t=126151038700001&r=1&w=2

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/util.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 78a6e924c7e1..dc76267e436e 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1039,7 +1039,19 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 
 	/* restart hardware */
 	if (local->open_count) {
+		/*
+		 * Upon resume hardware can sometimes be goofy due to
+		 * various platform / driver / bus issues, so restarting
+		 * the device may at times not work immediately. Propagate
+		 * the error.
+		 */
 		res = drv_start(local);
+		if (res) {
+			WARN(local->suspended, "Harware became unavailable "
+			     "upon resume. This is could be a software issue"
+			     "prior to suspend or a harware issue\n");
+			return res;
+		}
 
 		ieee80211_led_radio(local, true);
 	}
-- 
cgit v1.2.3


From e8a4a6df7397eb3b43ad3139d3fe9b41df70d6b0 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Sat, 26 Dec 2009 20:31:59 +0100
Subject: wl1251: timeout one too soon in wl1251_boot_run_firmware()

`loop' reaches INIT_LOOP + 1 after the loop. so if ACX_INTR_INIT_COMPLETE
occurs in the last iteration the write occurs but also the error out as if a
timeout occurred. This is probably very unlikely to ever occur.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_boot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
index 2e733e7bdfd4..28a808674080 100644
--- a/drivers/net/wireless/wl12xx/wl1251_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -256,7 +256,7 @@ int wl1251_boot_run_firmware(struct wl1251 *wl)
 		}
 	}
 
-	if (loop >= INIT_LOOP) {
+	if (loop > INIT_LOOP) {
 		wl1251_error("timeout waiting for the hardware to "
 			     "complete initialization");
 		return -EIO;
-- 
cgit v1.2.3


From 6c853da3f30c93eae847ecbcd9fdf10ba0da04c2 Mon Sep 17 00:00:00 2001
From: Zhu Yi <yi.zhu@intel.com>
Date: Mon, 28 Dec 2009 14:23:11 +0800
Subject: iwmc3200wifi: fix array out-of-boundary access

Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array
index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH().

Cc: stable@kernel.org
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwmc3200wifi/iwm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
index 79ffa3b98d73..842811142bef 100644
--- a/drivers/net/wireless/iwmc3200wifi/iwm.h
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -268,7 +268,7 @@ struct iwm_priv {
 
 	struct sk_buff_head rx_list;
 	struct list_head rx_tickets;
-	struct list_head rx_packets[IWM_RX_ID_HASH];
+	struct list_head rx_packets[IWM_RX_ID_HASH + 1];
 	struct workqueue_struct *rx_wq;
 	struct work_struct rx_worker;
 
-- 
cgit v1.2.3


From 55afc80b2ab100618c17af77915f75307b6bd5d1 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 29 Dec 2009 14:07:42 -0500
Subject: Revert "b43: Enforce DMA descriptor memory constraints"

This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23.

That commit is shown to cause allocation failures during initialization
on some machines.

http://bugzilla.kernel.org/show_bug.cgi?id=14844

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/dma.c | 197 ++++++++++-------------------------------
 drivers/net/wireless/b43/dma.h |   7 +-
 2 files changed, 46 insertions(+), 158 deletions(-)

diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 027be275e035..88d1fd02d40a 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -383,160 +383,44 @@ static inline
 	}
 }
 
-/* Check if a DMA region fits the device constraints.
- * Returns true, if the region is OK for usage with this device. */
-static inline bool b43_dma_address_ok(struct b43_dmaring *ring,
-				      dma_addr_t addr, size_t size)
-{
-	switch (ring->type) {
-	case B43_DMA_30BIT:
-		if ((u64)addr + size > (1ULL << 30))
-			return 0;
-		break;
-	case B43_DMA_32BIT:
-		if ((u64)addr + size > (1ULL << 32))
-			return 0;
-		break;
-	case B43_DMA_64BIT:
-		/* Currently we can't have addresses beyond
-		 * 64bit in the kernel. */
-		break;
-	}
-	return 1;
-}
-
-#define is_4k_aligned(addr)	(((u64)(addr) & 0x0FFFull) == 0)
-#define is_8k_aligned(addr)	(((u64)(addr) & 0x1FFFull) == 0)
-
-static void b43_unmap_and_free_ringmem(struct b43_dmaring *ring, void *base,
-				       dma_addr_t dmaaddr, size_t size)
-{
-	ssb_dma_unmap_single(ring->dev->dev, dmaaddr, size, DMA_TO_DEVICE);
-	free_pages((unsigned long)base, get_order(size));
-}
-
-static void * __b43_get_and_map_ringmem(struct b43_dmaring *ring,
-					dma_addr_t *dmaaddr, size_t size,
-					gfp_t gfp_flags)
-{
-	void *base;
-
-	base = (void *)__get_free_pages(gfp_flags, get_order(size));
-	if (!base)
-		return NULL;
-	memset(base, 0, size);
-	*dmaaddr = ssb_dma_map_single(ring->dev->dev, base, size,
-				      DMA_TO_DEVICE);
-	if (ssb_dma_mapping_error(ring->dev->dev, *dmaaddr)) {
-		free_pages((unsigned long)base, get_order(size));
-		return NULL;
-	}
-
-	return base;
-}
-
-static void * b43_get_and_map_ringmem(struct b43_dmaring *ring,
-				      dma_addr_t *dmaaddr, size_t size)
-{
-	void *base;
-
-	base = __b43_get_and_map_ringmem(ring, dmaaddr, size,
-					 GFP_KERNEL);
-	if (!base) {
-		b43err(ring->dev->wl, "Failed to allocate or map pages "
-		       "for DMA ringmemory\n");
-		return NULL;
-	}
-	if (!b43_dma_address_ok(ring, *dmaaddr, size)) {
-		/* The memory does not fit our device constraints.
-		 * Retry with GFP_DMA set to get lower memory. */
-		b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
-		base = __b43_get_and_map_ringmem(ring, dmaaddr, size,
-						 GFP_KERNEL | GFP_DMA);
-		if (!base) {
-			b43err(ring->dev->wl, "Failed to allocate or map pages "
-			       "in the GFP_DMA region for DMA ringmemory\n");
-			return NULL;
-		}
-		if (!b43_dma_address_ok(ring, *dmaaddr, size)) {
-			b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
-			b43err(ring->dev->wl, "Failed to allocate DMA "
-			       "ringmemory that fits device constraints\n");
-			return NULL;
-		}
-	}
-	/* We expect the memory to be 4k aligned, at least. */
-	if (B43_WARN_ON(!is_4k_aligned(*dmaaddr))) {
-		b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
-		return NULL;
-	}
-
-	return base;
-}
-
 static int alloc_ringmemory(struct b43_dmaring *ring)
 {
-	unsigned int required;
-	void *base;
-	dma_addr_t dmaaddr;
-
-	/* There are several requirements to the descriptor ring memory:
-	 * - The memory region needs to fit the address constraints for the
-	 *   device (same as for frame buffers).
-	 * - For 30/32bit DMA devices, the descriptor ring must be 4k aligned.
-	 * - For 64bit DMA devices, the descriptor ring must be 8k aligned.
+	gfp_t flags = GFP_KERNEL;
+
+	/* The specs call for 4K buffers for 30- and 32-bit DMA with 4K
+	 * alignment and 8K buffers for 64-bit DMA with 8K alignment. Testing
+	 * has shown that 4K is sufficient for the latter as long as the buffer
+	 * does not cross an 8K boundary.
+	 *
+	 * For unknown reasons - possibly a hardware error - the BCM4311 rev
+	 * 02, which uses 64-bit DMA, needs the ring buffer in very low memory,
+	 * which accounts for the GFP_DMA flag below.
+	 *
+	 * The flags here must match the flags in free_ringmemory below!
 	 */
-
 	if (ring->type == B43_DMA_64BIT)
-		required = ring->nr_slots * sizeof(struct b43_dmadesc64);
-	else
-		required = ring->nr_slots * sizeof(struct b43_dmadesc32);
-	if (B43_WARN_ON(required > 0x1000))
+		flags |= GFP_DMA;
+	ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
+						  B43_DMA_RINGMEMSIZE,
+						  &(ring->dmabase), flags);
+	if (!ring->descbase) {
+		b43err(ring->dev->wl, "DMA ringmemory allocation failed\n");
 		return -ENOMEM;
-
-	ring->alloc_descsize = 0x1000;
-	base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize);
-	if (!base)
-		return -ENOMEM;
-	ring->alloc_descbase = base;
-	ring->alloc_dmabase = dmaaddr;
-
-	if ((ring->type != B43_DMA_64BIT) || is_8k_aligned(dmaaddr)) {
-		/* We're on <=32bit DMA, or we already got 8k aligned memory.
-		 * That's all we need, so we're fine. */
-		ring->descbase = base;
-		ring->dmabase = dmaaddr;
-		return 0;
-	}
-	b43_unmap_and_free_ringmem(ring, base, dmaaddr, ring->alloc_descsize);
-
-	/* Ok, we failed at the 8k alignment requirement.
-	 * Try to force-align the memory region now. */
-	ring->alloc_descsize = 0x2000;
-	base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize);
-	if (!base)
-		return -ENOMEM;
-	ring->alloc_descbase = base;
-	ring->alloc_dmabase = dmaaddr;
-
-	if (is_8k_aligned(dmaaddr)) {
-		/* We're already 8k aligned. That Ok, too. */
-		ring->descbase = base;
-		ring->dmabase = dmaaddr;
-		return 0;
 	}
-	/* Force-align it to 8k */
-	ring->descbase = (void *)((u8 *)base + 0x1000);
-	ring->dmabase = dmaaddr + 0x1000;
-	B43_WARN_ON(!is_8k_aligned(ring->dmabase));
+	memset(ring->descbase, 0, B43_DMA_RINGMEMSIZE);
 
 	return 0;
 }
 
 static void free_ringmemory(struct b43_dmaring *ring)
 {
-	b43_unmap_and_free_ringmem(ring, ring->alloc_descbase,
-				   ring->alloc_dmabase, ring->alloc_descsize);
+	gfp_t flags = GFP_KERNEL;
+
+	if (ring->type == B43_DMA_64BIT)
+		flags |= GFP_DMA;
+
+	ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE,
+				ring->descbase, ring->dmabase, flags);
 }
 
 /* Reset the RX DMA channel */
@@ -646,14 +530,29 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring,
 	if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
 		return 1;
 
-	if (!b43_dma_address_ok(ring, addr, buffersize)) {
-		/* We can't support this address. Unmap it again. */
-		unmap_descbuffer(ring, addr, buffersize, dma_to_device);
-		return 1;
+	switch (ring->type) {
+	case B43_DMA_30BIT:
+		if ((u64)addr + buffersize > (1ULL << 30))
+			goto address_error;
+		break;
+	case B43_DMA_32BIT:
+		if ((u64)addr + buffersize > (1ULL << 32))
+			goto address_error;
+		break;
+	case B43_DMA_64BIT:
+		/* Currently we can't have addresses beyond
+		 * 64bit in the kernel. */
+		break;
 	}
 
 	/* The address is OK. */
 	return 0;
+
+address_error:
+	/* We can't support this address. Unmap it again. */
+	unmap_descbuffer(ring, addr, buffersize, dma_to_device);
+
+	return 1;
 }
 
 static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb)
@@ -715,9 +614,6 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring,
 	meta->dmaaddr = dmaaddr;
 	ring->ops->fill_descriptor(ring, desc, dmaaddr,
 				   ring->rx_buffersize, 0, 0, 0);
-	ssb_dma_sync_single_for_device(ring->dev->dev,
-				       ring->alloc_dmabase,
-				       ring->alloc_descsize, DMA_TO_DEVICE);
 
 	return 0;
 }
@@ -1354,9 +1250,6 @@ static int dma_tx_fragment(struct b43_dmaring *ring,
 	}
 	/* Now transfer the whole frame. */
 	wmb();
-	ssb_dma_sync_single_for_device(ring->dev->dev,
-				       ring->alloc_dmabase,
-				       ring->alloc_descsize, DMA_TO_DEVICE);
 	ops->poke_tx(ring, next_slot(ring, slot));
 	return 0;
 
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index e607b392314c..f7ab37c4cdbc 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -157,6 +157,7 @@ struct b43_dmadesc_generic {
 } __attribute__ ((__packed__));
 
 /* Misc DMA constants */
+#define B43_DMA_RINGMEMSIZE		PAGE_SIZE
 #define B43_DMA0_RX_FRAMEOFFSET		30
 
 /* DMA engine tuning knobs */
@@ -246,12 +247,6 @@ struct b43_dmaring {
 	/* The QOS priority assigned to this ring. Only used for TX rings.
 	 * This is the mac80211 "queue" value. */
 	u8 queue_prio;
-	/* Pointers and size of the originally allocated and mapped memory
-	 * region for the descriptor ring. */
-	void *alloc_descbase;
-	dma_addr_t alloc_dmabase;
-	unsigned int alloc_descsize;
-	/* Pointer to our wireless device. */
 	struct b43_wldev *dev;
 #ifdef CONFIG_B43_DEBUG
 	/* Maximum number of used slots. */
-- 
cgit v1.2.3