From 6c5aa407d52e9e40c2e31a3dfa5cb19a9672bf36 Mon Sep 17 00:00:00 2001 From: "Cousson, Benoit" Date: Fri, 20 Jan 2012 16:55:04 +0100 Subject: i2c: OMAP: Fix OMAP1 build error CONFIG_OF is not defined for OMAP1 yet and thus the omap1_defconfig build generate an error for 3.3-rc1. drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe': drivers/i2c/busses/i2c-omap.c:1021:26: error: 'omap_i2c_of_match' undeclared (first use in this function) drivers/i2c/busses/i2c-omap.c:1021:26: note: each undeclared identifier is reported only once for each function it appears in Wrap omap_i2c_of_match with of_match_ptr() to prevent compilation error in case of OMAP1 build. Signed-off-by: Benoit Cousson Cc: Ben Dooks Signed-off-by: Tony Lindgren --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f713eac55047..801df6000e9b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1018,7 +1018,7 @@ omap_i2c_probe(struct platform_device *pdev) goto err_release_region; } - match = of_match_device(omap_i2c_of_match, &pdev->dev); + match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); if (match) { u32 freq = 100000; /* default to 100000 Hz */ -- cgit v1.2.3 From 7080727c207f569751e94aaed7d94e873c69115f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Fri, 20 Jan 2012 05:38:30 -0800 Subject: ARM: OMAP2: fix omap3 touchbook kconfig warning warning: (MACH_OMAP3_TOUCHBOOK && DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) A lot of boards need BACKLIGHT_CLASS_DEVICE for the framebuffers to work, but it's not *needed* for the device itself. It might be nice to enable it by default somewhoe if graphics stuff is enabled, but that's another story. Signed-off-by: Felipe Contreras Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8ba7b96dcd1..782a909b3331 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -220,7 +220,6 @@ config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y - select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" -- cgit v1.2.3 From a075ccc6810dd2532d6bca548bd6e3b59105bd82 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Fri, 20 Jan 2012 05:38:31 -0800 Subject: ARM: OMAP2: fix regulator warnings warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MACH_OMAP_4430SDP && MACH_OMAP4_PANDA && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has unmet direct dependencies (REGULATOR) Signed-off-by: Felipe Contreras Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 782a909b3331..c7261082f00d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -214,7 +214,7 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" @@ -265,7 +265,7 @@ config MACH_OMAP_ZOOM2 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -275,7 +275,7 @@ config MACH_OMAP_ZOOM3 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -334,7 +334,7 @@ config MACH_OMAP_4430SDP depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" @@ -342,7 +342,7 @@ config MACH_OMAP4_PANDA depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config OMAP3_EMU bool "OMAP3 debugging peripherals" -- cgit v1.2.3 From 1ac6d46e43a52a901dadde2a341204e9a1c9e147 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 14:15:28 +0200 Subject: ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class Currently OMAP2 and 3 share the same omap_hwmod_class and omap_hwmod_class_sysconfig for dispc. However, OMAP3 has sysconfig bits that OMAP2 doesn't have, so we need to split those structs into OMAP2 and OMAP3 specific versions. This patch only splits the structs, without changing the contents. This is a prerequisite for a subsequent fix. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: added commit note] Signed-off-by: Paul Walmsley --- .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 21 -------------------- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 22 +++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 23 +++++++++++++++++++++- 3 files changed, 44 insertions(+), 22 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c11273da5dcc..f08e442af397 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -55,27 +55,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = { .reset = omap_dss_reset, }; -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2_dispc_sysc, -}; - /* * 'rfbi' class * remote frame buffer interface diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 177dee20faef..2a6729741b06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .dma_req = -1 } }; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + /* OMAP2xxx Timer Common */ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .rev_offs = 0x0000, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5324e8d93bc0..c9653099c87e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,6 +1480,27 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), }; +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3_dispc_sysc, +}; + /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, @@ -1503,7 +1524,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, + .class = &omap3_dispc_hwmod_class, .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_alwon_fck", .prcm = { -- cgit v1.2.3 From b0a85faf0bf11862a2a466daa1b7dc1d45527e64 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 14:15:29 +0200 Subject: ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc dispc's sysc_flags is missing SYSC_HAS_ENAWAKEUP flag. This seems to cause SYNC_LOST errors from the DSS when the power management is enabled. This patch adds the missing SYSC_HAS_ENAWAKEUP flag. Note that there are other flags missing also (clock activity, DSI's sysc flags), but as they are not critical, they will be fixed in the next merge window. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9653099c87e..b176d44e6c94 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1490,7 +1490,8 @@ static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { .sysc_offs = 0x0010, .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSC_HAS_ENAWAKEUP), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), .sysc_fields = &omap_hwmod_sysc_type1, -- cgit v1.2.3 From 6af486e2b3d45efca7c680aa7ce3bacebe22d7aa Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 28 Nov 2011 15:45:39 +0200 Subject: ARM: OMAP4: hwmod data: Add names for DMIC memory address space To be able to get the memory resources by name from the DMIC driver (for MPU and for DMA). Without this patch, functionality that was working in 3.2 breaks in 3.3-rc1. This patch should have gone in as part of the 3.3 merge window, but was inadvertently missed. Signed-off-by: Peter Ujfalusi [paul@pwsan.com: added commit message note] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f9f151081760..ef0524c10a84 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { { + .name = "mpu", .pa_start = 0x4012e000, .pa_end = 0x4012e07f, .flags = ADDR_TYPE_RT @@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { { + .name = "dma", .pa_start = 0x4902e000, .pa_end = 0x4902e07f, .flags = ADDR_TYPE_RT -- cgit v1.2.3 From 161107981df333955218bb0894f53b05b31da2ff Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 12:57:46 -0700 Subject: ARM: OMAP2+: io: fix compilation breakage on 2420-only configs Commit 7b250aff1ce346b6c7bc0329a2350334d1c66525 ("ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done") breaks the build on a 2420-only config on v3.3-rc1: arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:406: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:410: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:411: undefined reference to `omap2430_hwmod_init' Fix by only compiling omap2420_init_early() when CONFIG_SOC_OMAP2420 is selected, and only compiling omap2430_init_early() when CONFIG_SOC_OMAP2430 is selected. Signed-off-by: Paul Walmsley Cc: Tony Lindgren --- arch/arm/mach-omap2/io.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3f174d51f67f..eb50c29fb644 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } -#ifdef CONFIG_ARCH_OMAP2 +#ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -400,7 +400,9 @@ void __init omap2420_init_early(void) omap_hwmod_init_postsetup(); omap2420_clk_init(); } +#endif +#ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { omap2_set_globals_243x(); -- cgit v1.2.3 From d19e8f2e44a34b2a461f67ce9d0cb5bd43197c1e Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 12:57:49 -0700 Subject: ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage Commit 22f51371f8c35869ed850f46aa76b6cc2b502110 ("ARM: OMAP3: pm: use prcm chain handler") breaks the build on a 2420-only config, due to a missing include for plat/irqs.h: CC arch/arm/mach-omap2/prm2xxx_3xxx.o arch/arm/mach-omap2/prm2xxx_3xxx.c:41:11: error: 'INT_34XX_PRCM_MPU_IRQ' undeclared here (not in a function) Fix by explicitly including it. Signed-off-by: Paul Walmsley Cc: Tero Kristo Cc: Kevin Hilman --- arch/arm/mach-omap2/prm2xxx_3xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index c1c4d86a79a8..9ce765407ad5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -19,6 +19,7 @@ #include "common.h" #include #include +#include #include "vp.h" -- cgit v1.2.3 From 1d2f56c84f100890476e62d83062cfe9965fc7b4 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 28 Dec 2011 00:31:33 +0100 Subject: ARM: OMAP3: hwmod data: register dss hwmods after dss_core dss_core has to be initialized before any other DSS hwmod. Currently this is broken as dss_core is listed in chip/revision specific hwmod lists while other DSS hwmods are listed in common list which is registered first. This patch moves DSS hwmods (except for dss_core) to the separate list which is registered last to ensure that dss_core is already registered. This solves the problem with BUG() in L3 interrupt handler on boards with DSS enabled in bootloader. The long-term fix to this is to ensure modules are set up in dependency order in the hwmod core code. CC: Tomi Valkeinen CC: Archit Taneja CC: Paul Walmsley Signed-off-by: Ilya Yanok [paul@pwsan.com: add notes that this is just a temporary workaround until hwmod dependencies are added] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b176d44e6c94..3c8dd928628e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3545,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, - /* dss class */ - &omap3xxx_dss_dispc_hwmod, - &omap3xxx_dss_dsi1_hwmod, - &omap3xxx_dss_rfbi_hwmod, - &omap3xxx_dss_venc_hwmod, - /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, @@ -3657,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { NULL }; +static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { + /* dss class */ + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + NULL +}; + int __init omap3xxx_hwmod_init(void) { int r; @@ -3730,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void) if (h) r = omap_hwmod_register(h); + if (r < 0) + return r; + + /* + * DSS code presumes that dss_core hwmod is handled first, + * _before_ any other DSS related hwmods so register common + * DSS hwmods last to ensure that dss_core is already registered. + * Otherwise some change things may happen, for ex. if dispc + * is handled before dss_core and DSS is enabled in bootloader + * DIPSC will be reset with outputs enabled which sometimes leads + * to unrecoverable L3 error. + * XXX The long-term fix to this is to ensure modules are set up + * in dependency order in the hwmod core code. + */ + r = omap_hwmod_register(omap3xxx_dss_hwmods); return r; } -- cgit v1.2.3 From dbc3982ae286e934e71f0b44e78d14844a9ca83b Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 23 Jan 2012 12:18:14 +0530 Subject: ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter Commit 2f0778af (ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtime) had a typo for the case when CONFIG_OMAP_32K_TIMER is not set. In dmtimer_read_sched_clock(), wrong argument was getting passed to __omap_dm_timer_read_counter() function call; instead of "&clksrc", we were passing "clksrc.io_base", which results into kernel crash. To reproduce kernel crash, just disable the CONFIG_OMAP_32K_TIMER config option (and DEBUG_LL) and build/boot the kernel. This will use dmtimer as a kernel clocksource and lead to kernel crash during boot - [ 0.000000] OMAP clocksource: GPTIMER2 at 26000000 Hz [ 0.000000] sched_clock: 32 bits at 26MHz, resolution 38ns, wraps every 165191ms [ 0.000000] Unable to handle kernel paging request at virtual address 00030ef1 [ 0.000000] pgd = c0004000 [ 0.000000] [00030ef1] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.3.0-rc1-11574-g0c76665-dirty #3) [ 0.000000] PC is at dmtimer_read_sched_clock+0x18/0x4c [ 0.000000] LR is at update_sched_clock+0x10/0x84 [ 0.000000] pc : [] lr : [] psr: 200001d3 [ 0.000000] sp : c0641f38 ip : c0641e18 fp : 0000000a [ 0.000000] r10: 151c3303 r9 : 00000026 r8 : 76276259 [ 0.000000] r7 : 00028547 r6 : c065ac80 r5 : 431bde82 r4 : c0655968 [ 0.000000] r3 : 00030ef1 r2 : fb032000 r1 : 00000028 r0 : 00000001 Signed-off-by: Vaibhav Hiremath [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 6eeff0e0ae01..5c9acea95761 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(clksrc.io_base, 1); + return __omap_dm_timer_read_counter(&clksrc, 1); return 0; } -- cgit v1.2.3 From 8ef5d844cc3a644ea6f7665932a4307e9fad01fa Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Mon, 23 Jan 2012 08:32:23 +0100 Subject: ARM: OMAP2+: GPMC: fix device size setup following statement can only change device size from 8-bit(0) to 16-bit(1), but not vice versa: regval |= GPMC_CONFIG1_DEVICESIZE(wval); so as this field has 1 reserved bit, that could be used in future, just clear both bits and then OR with the desired value Signed-off-by: Yegor Yefremov Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 130034bf01d5..dfffbbf4c009 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval) case GPMC_CONFIG_DEV_SIZE: regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* clear 2 target bits */ + regval &= ~GPMC_CONFIG1_DEVICESIZE(3); + + /* set the proper value */ regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); break; -- cgit v1.2.3 From ffa1e4ede453cf92cfcd9f96f9140c21aeb319f7 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 18 Dec 2011 02:35:47 +0200 Subject: ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup hsmmc23_before_set_reg() can set MMCSDIO2ADPCLKISEL bit, which enables internal clock for MMC2. Currently this function is also called by code handling MMC3, and if .internal_clock is set in platform data (by default it currently is), it will set MMCSDIO2ADPCLKISEL for MMC2 instead of MMC3 (MMC3 doesn't have such bit so nothing actually needs to be done). This breaks 2nd SD slot on pandora. Fix this by changing hsmmc23_before_set_reg() to only handle MMC2. Note that this removes .remux() call for MMC3, but no board currently needs it and it's also not called for MMC4 and MMC5. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index bd844af13af5..8658bd77763c 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -182,7 +182,7 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) } } -static void hsmmc23_before_set_reg(struct device *dev, int slot, +static void hsmmc2_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { struct omap_mmc_platform_data *mmc = dev->platform_data; @@ -407,14 +407,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - /* FALLTHROUGH */ - case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; mmc->slots[0].after_set_reg = NULL; } break; + case 3: case 4: case 5: mmc->slots[0].before_set_reg = NULL; -- cgit v1.2.3 From d82e5190da9057e31d6f0fe5771dfbe55ff9125f Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 12 Jan 2012 16:26:45 +0200 Subject: ARM: OMAP: fix MMC2 loopback clock handling Currently MMC2 setup code can only enable loopback clock and relies on reset value for boards that need to have it disabled. This causes a problem with certain bootloaders that always enable that clock, resulting with unwanted bootloader dependencies. Fix this by making it disable the clock if board data says so. Signed-off-by: Grazvydas Ignotas Acked-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 8658bd77763c..ad0adb5a1e0e 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -175,11 +175,12 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) { u32 reg; - if (mmc->slots[0].internal_clock) { - reg = omap_ctrl_readl(control_devconf1_offset); + reg = omap_ctrl_readl(control_devconf1_offset); + if (mmc->slots[0].internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } + else + reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); } static void hsmmc2_before_set_reg(struct device *dev, int slot, -- cgit v1.2.3 From e0feca899c9785316ec67954f1a8e84102eaaca7 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 23 Dec 2011 18:39:31 +0100 Subject: ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree pdata needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0b510ad01a00..283d11eae693 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) break; default: pr_err("Invalid McSPI Revision value\n"); + kfree(pdata); return -EINVAL; } -- cgit v1.2.3 From 14ea960164ecb25f7617eba33e7c7f9163e93e7c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jan 2012 10:55:17 +0100 Subject: ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // Signed-off-by: Julia Lawall Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 9dd93453e563..7e755bb0ffc4 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_iounmap; } } -- cgit v1.2.3