summaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2017-08-31KVM: update to new mmu_notifier semantic v2Jérôme Glisse1-42/+0
Calls to mmu_notifier_invalidate_page() were replaced by calls to mmu_notifier_invalidate_range() and are now bracketed by calls to mmu_notifier_invalidate_range_start()/end() Remove now useless invalidate_page callback. Changed since v1 (Linus Torvalds) - remove now useless kvm_arch_mmu_notifier_invalidate_page() Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Tested-by: Mike Galbraith <efault@gmx.de> Tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-03Merge tag 'kvm-arm-for-v4.13-rc4' of ↵Radim Krčmář5-33/+22
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM Fixes for v4.13-rc4 - Yet another race with VM destruction plugged - A set of small vgic fixes
2017-08-03KVM: arm/arm64: vgic: Use READ_ONCE fo cmpxchgChristoffer Dall1-2/+2
There is a small chance that the compiler could generate separate loads for the dist->propbaser which could be modified from another CPU. As we want to make sure we atomically update the entire value, and don't race with other updates, guarantee that the cmpxchg operation compares against the original value. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-02KVM: avoid using rcu_dereference_protectedPaolo Bonzini1-7/+4
During teardown, accesses to memslots and buses are using rcu_dereference_protected with an always-true condition because these accesses are done outside the usual mutexes. This is because the last reference is gone and there cannot be any concurrent modifications, but rcu_dereference_protected is ugly and unobvious. Instead, check the refcount in kvm_get_bus and __kvm_memslots. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-26KVM: make pid available for uevents without debugfsClaudio Imbrenda1-23/+12
Simplify and improve the code so that the PID is always available in the uevent even when debugfs is not available. This adds a userspace_pid field to struct kvm, as per Radim's suggestion, so that the PID can be retrieved on destruction too. Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Fixes: 286de8f6ac9202 ("KVM: trigger uevents when creating or destroying a VM") Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-25KVM: arm/arm64: Handle hva aging while destroying the vmSuzuki K Poulose1-0/+4
The mmu_notifier_release() callback of KVM triggers cleaning up the stage2 page table on kvm-arm. However there could be other notifier callbacks in parallel with the mmu_notifier_release(), which could cause the call backs ending up in an empty stage2 page table. Make sure we check it for all the notifier callbacks. Cc: stable@vger.kernel.org Fixes: commit 293f29363 ("kvm-arm: Unmap shadow pagetables properly") Reported-by: Alex Graf <agraf@suse.de> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-25KVM: arm/arm64: PMU: Fix overflow interrupt injectionAndrew Jones1-28/+15
kvm_pmu_overflow_set() is called from perf's interrupt handler, making the call of kvm_vgic_inject_irq() from it introduced with "KVM: arm/arm64: PMU: remove request-less vcpu kick" a really bad idea, as it's quite easy to try and retake a lock that the interrupted context is already holding. The fix is to use a vcpu kick, leaving the interrupt injection to kvm_pmu_sync_hwstate(), like it was doing before the refactoring. We don't just revert, though, because before the kick was request-less, leaving the vcpu exposed to the request-less vcpu kick race, and also because the kick was used unnecessarily from register access handlers. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-25KVM: arm/arm64: Fix bug in advertising KVM_CAP_MSI_DEVID capabilityShanker Donthineni2-3/+1
Commit 0e4e82f154e3 ("KVM: arm64: vgic-its: Enable ITS emulation as a virtual MSI controller") tried to advertise KVM_CAP_MSI_DEVID, but the code logic was not updating the dist->msis_require_devid field correctly. If hypervisor tool creates the ITS device after VGIC initialization then we don't advertise KVM_CAP_MSI_DEVID capability. Update the field msis_require_devid to true inside vgic_its_create() to fix the issue. Fixes: 0e4e82f154e3 ("vgic-its: Enable ITS emulation as a virtual MSI controller") Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-15Merge tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-26/+115
Pull more KVM updates from Radim Krčmář: "Second batch of KVM updates for v4.13 Common: - add uevents for VM creation/destruction - annotate and properly access RCU-protected objects s390: - rename IOCTL added in the first v4.13 merge x86: - emulate VMLOAD VMSAVE feature in SVM - support paravirtual asynchronous page fault while nested - add Hyper-V userspace interfaces for better migration - improve master clock corner cases - extend internal error reporting after EPT misconfig - correct single-stepping of emulated instructions in SVM - handle MCE during VM entry - fix nVMX VM entry checks and nVMX VMCS shadowing" * tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: x86: hyperv: make VP_INDEX managed by userspace KVM: async_pf: Let guest support delivery of async_pf from guest mode KVM: async_pf: Force a nested vmexit if the injected #PF is async_pf KVM: async_pf: Add L1 guest async_pf #PF vmexit handler KVM: x86: Simplify kvm_x86_ops->queue_exception parameter list kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2 KVM: x86: make backwards_tsc_observed a per-VM variable KVM: trigger uevents when creating or destroying a VM KVM: SVM: Enable Virtual VMLOAD VMSAVE feature KVM: SVM: Add Virtual VMLOAD VMSAVE feature definition KVM: SVM: Rename lbr_ctl field in the vmcb control area KVM: SVM: Prepare for new bit definition in lbr_ctl KVM: SVM: handle singlestep exception when skipping emulated instructions KVM: x86: take slots_lock in kvm_free_pit KVM: s390: Fix KVM_S390_GET_CMMA_BITS ioctl definition kvm: vmx: Properly handle machine check during VM-entry KVM: x86: update master clock before computing kvmclock_offset kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fields kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controls kvm: nVMX: Validate the I/O bitmaps on nested VM-entry ...
2017-07-13Merge tag 'vfio-v4.13-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-15/+25
Pull VFIO updates from Alex Williamson: - Include Intel XXV710 in INTx workaround (Alex Williamson) - Make use of ERR_CAST() for error return (Dan Carpenter) - Fix vfio_group release deadlock from iommu notifier (Alex Williamson) - Unset KVM-VFIO attributes only on group match (Alex Williamson) - Fix release path group/file matching with KVM-VFIO (Alex Williamson) - Remove unnecessary lock uses triggering lockdep splat (Alex Williamson) * tag 'vfio-v4.13-rc1' of git://github.com/awilliam/linux-vfio: vfio: Remove unnecessary uses of vfio_container.group_lock vfio: New external user group/file match kvm-vfio: Decouple only when we match a group vfio: Fix group release deadlock vfio: Use ERR_CAST() instead of open coding it vfio/pci: Add Intel XXV710 to hidden INTx devices
2017-07-12KVM: trigger uevents when creating or destroying a VMClaudio Imbrenda1-0/+69
This patch adds a few lines to the KVM common code to fire a KOBJ_CHANGE uevent whenever a KVM VM is created or destroyed. The event carries five environment variables: CREATED indicates how many times a new VM has been created. It is useful for example to trigger specific actions when the first VM is started COUNT indicates how many VMs are currently active. This can be used for logging or monitoring purposes PID has the pid of the KVM process that has been started or stopped. This can be used to perform process-specific tuning. STATS_PATH contains the path in debugfs to the directory with all the runtime statistics for this VM. This is useful for performance monitoring and profiling. EVENT described the type of event, its value can be either "create" or "destroy" Specific udev rules can be then set up in userspace to deal with the creation or destruction of VMs as needed. Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-10Merge branch 'annotations' of ↵Paolo Bonzini3-17/+31
git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux into kvm-master
2017-07-10kvm: avoid unused variable warning for UP buildsPaolo Bonzini1-9/+15
The uniprocessor version of smp_call_function_many does not evaluate all of its argument, and the compiler emits a warning about "wait" being unused. This breaks the build on architectures for which "-Werror" is enabled by default. Work around it by moving the invocation of smp_call_function_many to its own inline function. Reported-by: Paul Mackerras <paulus@ozlabs.org> Cc: stable@vger.kernel.org Fixes: 7a97cec26b94c909f4cbad2dc3186af3e457a522 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-07KVM: mark memory slots as rcuChristian Borntraeger1-2/+4
we access the memslots array via srcu. Mark it as such and use the right access functions also for the freeing of memory slots. Found by sparse: ./include/linux/kvm_host.h:565:16: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-07KVM: mark kvm->busses as rcu protectedChristian Borntraeger2-10/+15
mark kvm->busses as rcu protected and use the correct access function everywhere. found by sparse virt/kvm/kvm_main.c:3490:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3509:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3561:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3644:15: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-07KVM: use rcu access function for irq routingChristian Borntraeger1-1/+1
irq routing is rcu protected. Use the proper access functions. Found by sparse virt/kvm/irqchip.c:233:13: warning: incorrect type in assignment (different address spaces) virt/kvm/irqchip.c:233:13: expected struct kvm_irq_routing_table *old virt/kvm/irqchip.c:233:13: got struct kvm_irq_routing_table [noderef] <asn:4>*irq_routing Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-07KVM: mark vcpu->pid pointer as rcu protectedChristian Borntraeger1-4/+11
We do use rcu to protect the pid pointer. Mark it as such and adopt all code to use the proper access methods. This was detected by sparse. "virt/kvm/kvm_main.c:2248:15: error: incompatible types in comparison expression (different address spaces)" Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds15-150/+1297
Pull KVM updates from Paolo Bonzini: "PPC: - Better machine check handling for HV KVM - Ability to support guests with threads=2, 4 or 8 on POWER9 - Fix for a race that could cause delayed recognition of signals - Fix for a bug where POWER9 guests could sleep with interrupts pending. ARM: - VCPU request overhaul - allow timer and PMU to have their interrupt number selected from userspace - workaround for Cavium erratum 30115 - handling of memory poisonning - the usual crop of fixes and cleanups s390: - initial machine check forwarding - migration support for the CMMA page hinting information - cleanups and fixes x86: - nested VMX bugfixes and improvements - more reliable NMI window detection on AMD - APIC timer optimizations Generic: - VCPU request overhaul + documentation of common code patterns - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits) Update my email address kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12 kvm: x86: mmu: allow A/D bits to be disabled in an mmu x86: kvm: mmu: make spte mmio mask more explicit x86: kvm: mmu: dead code thanks to access tracking KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code KVM: PPC: Book3S HV: Close race with testing for signals on guest entry KVM: PPC: Book3S HV: Simplify dynamic micro-threading code KVM: x86: remove ignored type attribute KVM: LAPIC: Fix lapic timer injection delay KVM: lapic: reorganize restart_apic_timer KVM: lapic: reorganize start_hv_timer kvm: nVMX: Check memory operand to INVVPID KVM: s390: Inject machine check into the nested guest KVM: s390: Inject machine check into the guest tools/kvm_stat: add new interactive command 'b' tools/kvm_stat: add new command line switch '-i' tools/kvm_stat: fix error on interactive command 'g' KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit ...
2017-07-05Merge tag 'arm64-upstream' of ↵Linus Torvalds1-3/+33
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ...
2017-06-30Merge tag 'kvmarm-for-4.13' of ↵Paolo Bonzini16-171/+1372
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM updates for 4.13 - vcpu request overhaul - allow timer and PMU to have their interrupt number selected from userspace - workaround for Cavium erratum 30115 - handling of memory poisonning - the usual crop of fixes and cleanups Conflicts: arch/s390/include/asm/kvm_host.h
2017-06-28vfio: New external user group/file matchAlex Williamson1-8/+19
At the point where the kvm-vfio pseudo device wants to release its vfio group reference, we can't always acquire a new reference to make that happen. The group can be in a state where we wouldn't allow a new reference to be added. This new helper function allows a caller to match a file to a group to facilitate this. Given a file and group, report if they match. Thus the caller needs to already have a group reference to match to the file. This allows the deletion of a group without acquiring a new reference. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Cc: stable@vger.kernel.org
2017-06-28kvm-vfio: Decouple only when we match a groupAlex Williamson1-7/+6
Unset-KVM and decrement-assignment only when we find the group in our list. Otherwise we can get out of sync if the user triggers this for groups that aren't currently on our list. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org
2017-06-27KVM: explain missing kvm_put_kvm in case of failurePaolo Bonzini1-0/+6
The call to kvm_put_kvm was removed from error handling in commit 506cfba9e726 ("KVM: don't use anon_inode_getfd() before possible failures"), but it is _not_ a memory leak. Reuse Al's explanation to avoid that someone else makes the same mistake. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27KVM: Replaces symbolic permissions with numericRoman Storozhenko1-3/+3
Replaces "S_IRUGO | S_IWUSR" with 0644. The reason is that symbolic permissions considered harmful: https://lwn.net/Articles/696229/ Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-22arm/arm64: KVM: add guest SEA supportTyler Baicar1-3/+33
Currently external aborts are unsupported by the guest abort handling. Add handling for SEAs so that the host kernel reports SEAs which occur in the guest kernel. When an SEA occurs in the guest kernel, the guest exits and is routed to kvm_handle_guest_abort(). Prior to this patch, a print message of an unsupported FSC would be printed and nothing else would happen. With this patch, the code gets routed to the APEI handling of SEAs in the host kernel to report the SEA information. Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-22KVM: arm/arm64: Signal SIGBUS when stage2 discovers hwpoison memoryJames Morse1-0/+23
Once we enable ARCH_SUPPORTS_MEMORY_FAILURE on arm64, notifications for broken memory can call memory_failure() in mm/memory-failure.c to offline pages of memory, possibly signalling user space processes and notifying all the in-kernel users. memory_failure() has two modes, early and late. Early is used by machine-managers like Qemu to receive a notification when a memory error is notified to the host. These can then be relayed to the guest before the affected page is accessed. To enable this, the process must set PR_MCE_KILL_EARLY in PR_MCE_KILL_SET using the prctl() syscall. Once the early notification has been handled, nothing stops the machine-manager or guest from accessing the affected page. If the machine-manager does this the page will fail to be mapped and SIGBUS will be sent. This patch adds the equivalent path for when the guest accesses the page, sending SIGBUS to the machine-manager. These two signals can be distinguished by the machine-manager using their si_code: BUS_MCEERR_AO for 'action optional' early notifications, and BUS_MCEERR_AR for 'action required' synchronous/late notifications. Do as x86 does, and deliver the SIGBUS when we discover pfn == KVM_PFN_ERR_HWPOISON. Use the hugepage size as si_addr_lsb if this vma was allocated as a hugepage. Transparent hugepages will be split by memory_failure() before we see them here. Cc: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar1-1/+1
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-15KVM: ARM64: fix phy counter access failure in guest.Hu Huajun1-3/+1
When reading the cntpct_el0 in guest with VHE (Virtual Host Extension) enabled in host, the "Unsupported guest sys_reg access" error reported. The reason is cnthctl_el2.EL1PCTEN is not enabled, which is expected to be done in kvm_timer_init_vhe(). The problem is kvm_timer_init_vhe is called by cpu_init_hyp_mode, and which is called when VHE is disabled. This patch remove the incorrect call to kvm_timer_init_vhe() from cpu_init_hyp_mode(), and calls kvm_timer_init_vhe() to enable cnthctl_el2.EL1PCTEN in cpu_hyp_reinit(). Fixes: 488f94d7212b ("KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systems") Cc: stable@vger.kernel.org Signed-off-by: Hu Huajun <huhuajun@huawei.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15arm64/kvm: sysreg: fix typo'd SYS_ICC_IGRPEN*_EL1Mark Rutland1-2/+2
Per ARM DDI 0487B.a, the registers are named ICC_IGRPEN*_EL1 rather than ICC_GRPEN*_EL1. Correct our mnemonics and comments to match, before we add more GICv3 register definitions. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu Acked-by: Christoffer Dall <cdall@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Log an error if trapping a write-to-read-only GICv3 accessMarc Zyngier1-0/+6
A write-to-read-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Log an error if trapping a read-from-write-only GICv3 accessMarc Zyngier1-0/+4
A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Log which GICv3 system registers are trappedMarc Zyngier1-1/+4
In order to facilitate debug, let's log which class of GICv3 system registers are trapped. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Enable GICv3 common sysreg trapping via command-lineMarc Zyngier1-1/+10
Now that we're able to safely handle common sysreg access, let's give the user the opportunity to enable it by passing a specific command-line option (vgic_v3.common_trap). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_PMR_EL1 handlerMarc Zyngier1-0/+27
Add a handler for reading/writing the guest's view of the ICC_PMR_EL1 register, which is located in the ICH_VMCR_EL2.VPMR field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_CTLR_EL1 handlerMarc Zyngier1-0/+46
Add a handler for reading/writing the guest's view of the ICV_CTLR_EL1 register. only EOIMode and CBPR are of interest here, as all the other bits directly come from ICH_VTR_EL2 and are Read-Only. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_RPR_EL1 handlerMarc Zyngier1-0/+10
Add a handler for reading the guest's view of the ICV_RPR_EL1 register, returning the highest active priority. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_DIR_EL1 handlerMarc Zyngier1-0/+27
Add a handler for writing the guest's view of the ICC_DIR_EL1 register, performing the deactivation of an interrupt if EOImode is set ot 1. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15arm64: Add workaround for Cavium Thunder erratum 30115David Daney1-0/+7
Some Cavium Thunder CPUs suffer a problem where a KVM guest may inadvertently cause the host kernel to quit receiving interrupts. Use the Group-0/1 trapping in order to deal with it. [maz]: Adapted patch to the Group-0/1 trapping, reworked commit log Tested-by: Alexander Graf <agraf@suse.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Enable GICv3 Group-0 sysreg trapping via command-lineMarc Zyngier1-0/+6
Now that we're able to safely handle Group-0 sysreg access, let's give the user the opportunity to enable it by passing a specific command-line option (vgic_v3.group0_trap). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Enable trapping of Group-0 system registersMarc Zyngier1-1/+4
In order to be able to trap Group-0 GICv3 system registers, we need to set ICH_HCR_EL2.TALL0 begore entering the guest. This is conditionnaly done after having restored the guest's state, and cleared on exit. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add misc Group-0 handlersMarc Zyngier1-0/+7
A number of Group-0 registers can be handled by the same accessors as that of Group-1, so let's add the required system register encodings and catch them in the dispatching function. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_IGNREN0_EL1 handlerMarc Zyngier1-0/+23
Add a handler for reading/writing the guest's view of the ICC_IGRPEN0_EL1 register, which is located in the ICH_VMCR_EL2.VENG0 field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_BPR0_EL1 handlerMarc Zyngier1-0/+28
Add a handler for reading/writing the guest's view of the ICC_BPR0_EL1 register, which is located in the ICH_VMCR_EL2.BPR0 field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Enable GICv3 Group-1 sysreg trapping via command-lineMarc Zyngier1-0/+11
Now that we're able to safely handle Group-1 sysreg access, let's give the user the opportunity to enable it by passing a specific command-line option (vgic_v3.group1_trap). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Enable trapping of Group-1 system registersMarc Zyngier2-0/+15
In order to be able to trap Group-1 GICv3 system registers, we need to set ICH_HCR_EL2.TALL1 before entering the guest. This is conditionally done after having restored the guest's state, and cleared on exit. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_HPPIR1_EL1 handlerMarc Zyngier1-0/+23
Add a handler for reading the guest's view of the ICV_HPPIR1_EL1 register. This is a simple parsing of the available LRs, extracting the highest available interrupt. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_AP1Rn_EL1 handlerMarc Zyngier1-0/+94
Add a handler for reading/writing the guest's view of the ICV_AP1Rn_EL1 registers. We just map them to the corresponding ICH_AP1Rn_EL2 registers. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_EOIR1_EL1 handlerMarc Zyngier1-0/+120
Add a handler for writing the guest's view of the ICC_EOIR1_EL1 register. This involves dropping the priority of the interrupt, and deactivating it if required (EOImode == 0). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_IAR1_EL1 handlerMarc Zyngier1-0/+163
Add a handler for reading the guest's view of the ICC_IAR1_EL1 register. This involves finding the highest priority Group-1 interrupt, checking against both PMR and the active group priority, activating the interrupt and setting the group priority as active. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_IGRPEN1_EL1 handlerMarc Zyngier1-0/+23
Add a handler for reading/writing the guest's view of the ICC_IGRPEN1_EL1 register, which is located in the ICH_VMCR_EL2.VENG1 field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 11:34:48 +0000