summaryrefslogtreecommitdiff
path: root/tools/perf/util/event.h
AgeCommit message (Collapse)AuthorFilesLines
2013-11-11perf record: Synthesize non-exec MMAP records when --data usedArnaldo Carvalho de Melo1-2/+2
When perf_event_attr.mmap_data is set the kernel will generate PERF_RECORD_MMAP events when non-exec (data, SysV mem) mmaps are created, so we need to synthesize from /proc/pid/maps for existing threads, as we do for exec mmaps. Right now just 'perf record' does it, but any other tool that uses perf_event__synthesize_thread(s|map) can request it. Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: Don Zickus <dzickus@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bill Gray <bgray@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Fowles <rfowles@redhat.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ihwzraikx23ian9txinogvv2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-05perf tools: Finish the removal of 'self' argumentsArnaldo Carvalho de Melo1-1/+2
They convey no information, perhaps I was bitten by some snake at some point, complete the detox by naming the last of those arguments more sensibly. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-u1r0dnjoro08dgztiy2g3t2q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf evlist: Fix perf_evlist__mmap_read event overflowJiri Olsa1-0/+3
The perf_evlist__mmap_read used 'union perf_event' as a placeholder for event crossing the mmap boundary. This is ok for sample shorter than ~PATH_MAX. However we could grow up to the maximum sample size which is 16 bits max. I hit this overflow issue when using 'perf top -G dwarf' which produces sample with the size around 8192 bytes. We could configure any valid sample size here using: '-G dwarf,size'. Using array with sample max size instead for the event placeholder. Also adding another safe check for the dynamic size of the user stack. TODO: The 'struct perf_mmap' is quite big now, maybe we could use some lazy allocation for event_copy size. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1380721599-24285-1-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-09perf tools: Adding throttle event data struct supportJiri Olsa1-0/+7
Moving 'struct throttle_event' out of python code and making it global as any other event. There's no usage of throttling events in any perf commands so far (besides python support), but we'll need this event data backup for upcoming test. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1378031796-17892-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-04tools/perf: Add support for record transaction flagsAndi Kleen1-0/+1
Add support for recording and displaying the transaction flags. They are essentially a new sort key. Also display them in a nice way to the user. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379688044-14173-6-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-11perf tools: Add attr->mmap2 supportStephane Eranian1-0/+19
This patch adds support for the new PERF_RECORD_MMAP2 record type exposed by the kernel. This is an extended PERF_RECORD_MMAP record. It adds for each file-backed mapping the device major, minor number and the inode number and generation. This triplet uniquely identifies the source of a file-backed mapping. It can be used to detect identical virtual mappings between processes, for instance. The patch will prefer MMAP2 over MMAP. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1377079825-19057-3-git-send-email-eranian@google.com [ Cope with 314add6 "Change machine__findnew_thread() to set thread pid", fix 'perf test' regression test entry affected, use perf_missing_features.mmap2 to fallback to not using .mmap2 in older kernels, so that new tools can work with kernels where this feature is not present ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf tools: Add a function to calculate sample event sizeAdrian Hunter1-0/+2
Add perf_event__sample_event_size() which can be used when synthesizing sample events to determine how big the resulting event will be, and therefore how much memory to allocate. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-11-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf tools: Expand perf_event__synthesize_sample()Adrian Hunter1-0/+1
Expand perf_event__synthesize_sample() to handle all sample format bits. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-10-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf tools: Add missing 'abi' member to 'struct regs_dump'Adrian Hunter1-0/+1
And store the parsed value there. Note that the 'abi' is 0 (no registers), 1 (32-bit registers) or 2 (64-bit registers), but the registers are anyway copied one-by-one as 64-bit values onto the event i.e. see 'perf_output_sample_regs()' Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-9-git-send-email-adrian.hunter@intel.com Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf tools: Add support for PERF_SAMPLE_IDENTIFIERAdrian Hunter1-1/+2
Enable parsing of samples with sample format bit PERF_SAMPLE_IDENTIFIER. In addition, if the kernel supports it, prefer it to selecting PERF_SAMPLE_ID thereby allowing non-matching sample types. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf tools: Remove references to struct ip_eventAdrian Hunter1-11/+0
The ip_event struct assumes fixed positions for ip, pid and tid. That is no longer true with the addition of PERF_SAMPLE_IDENTIFIER. The information is anyway in struct sample, so use that instead. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-5-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-12perf tools: Remove filter parameter of perf_event__preprocess_sample()Adrian Hunter1-2/+1
Now that the symbol filter is recorded on the machine there is no need to pass it to perf_event__preprocess_sample(). So remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1375961547-30267-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-07perf tools: Add support for parsing PERF_SAMPLE_READ sample typeJiri Olsa1-0/+18
Adding support to parse out the PERF_SAMPLE_READ sample bits. The code contains both single and group format specification. This code parse out and prepare PERF_SAMPLE_READ data into the perf_sample struct. It will be used for group leader sampling feature comming in shortly. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-0tgdoln5rwk3wocshb442cl3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-15perf tools: Remove event types framework completelyJiri Olsa1-1/+1
Removing event types framework completely. The only remainder (apart from few comments) is following enum: enum perf_user_event_type { ... PERF_RECORD_HEADER_EVENT_TYPE = 65, /* deprecated */ ... } It's kept as deprecated, resulting in error when processed in perf_session__process_user_event function. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1373556513-3000-6-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01perf tools: Add mem access sampling core supportStephane Eranian1-0/+8
This patch adds the sorting and histogram support functions to enable profiling of memory accesses. The following sorting orders are added: - symbol_daddr: data address symbol (or raw address) - dso_daddr: data address shared object - locked: access uses locked transaction - tlb : TLB access - mem : memory level of the access (L1, L2, L3, RAM, ...) - snoop: access snoop mode Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1359040242-8269-12-git-send-email-eranian@google.com [ committer note: changed to cope with fc5871ed, the move of methods to machine.[ch], and the rename of dsrc to data_src, to match the change made in the PERF_SAMPLE_DSRC in a previous patch. ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01perf tools: Add support for weight v7 (modified)Andi Kleen1-0/+1
perf record has a new option -W that enables weightened sampling. Add sorting support in top/report for the average weight per sample and the total weight sum. This allows to both compare relative cost per event and the total cost over the measurement period. Add the necessary glue to perf report, record and the library. v2: Merge with new hist refactoring. v3: Fix manpage. Remove value check. Rename global_weight to weight and weight to local_weight. v4: Readd sort keys to manpage v5: Move weight to end v6: Move weight to template v7: Rename weight key. Original patch from Andi modified by Stephane Eranian <eranian@google.com> to include ONLY the weight supporting code and apply to pristine 3.8.0-rc4. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1359040242-8269-6-git-send-email-eranian@google.com [ committer note: changed to cope with fc5871ed and the hists_link perf test entry ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-29perf tools: Move BUILD_ID_SIZE into build-id objectJiri Olsa1-2/+1
Moving BUILD_ID_SIZE define into build-id object, plus include related changes. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1351372712-21104-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-06perf event: No need to create a thread when handling PERF_RECORD_EXITArnaldo Carvalho de Melo1-1/+5
When we were processing a PERF_RECORD_EXIT event we first used machine__findnew_thread for both the thread exiting and for its parent, only to use just the thread struct associated with the one exiting, and to just delete it. If it existed, i.e. not created at this very moment in machine__findnew_thread, it will be moved to the machine->dead_threads linked list, because we may have hist_entries pointing to it, but if it was created just do be deleted, it will just sit there with no references at all. Use the new machine__find_thread() method so that if it is not there, we don't create it. As a bonus the parent thread will also not be created at this point. Create process_fork() and process_exit() helpers to use this and make the builtins use it instead of the generic process_task(), ditched by this patch. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-z7n2y98ebjyrvmytaope4vdl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: fix ALIGN redefinition in system headersIrina Tirdea1-1/+1
On some systems (e.g. Android), ALIGN is defined in system headers as ALIGN(p). The definition of ALIGN used in perf takes 2 parameters: ALIGN(x,a). This leads to redefinition conflicts. Redefinition error on Android: In file included from util/include/linux/list.h:1:0, from util/callchain.h:5, from util/hist.h:6, from util/session.h:4, from util/build-id.h:4, from util/annotate.c:11: util/include/linux/kernel.h:11:0: error: "ALIGN" redefined [-Werror] bionic/libc/include/sys/param.h:38:0: note: this is the location of the previous definition Conflics with system defined ALIGN in Android: util/event.c: In function 'perf_event__synthesize_comm': util/event.c:115:32: error: macro "ALIGN" passed 2 arguments, but takes just 1 util/event.c:115:9: error: 'ALIGN' undeclared (first use in this function) util/event.c:115:9: note: each undeclared identifier is reported only once for each function it appears in In order to avoid this redefinition, ALIGN is renamed to PERF_ALIGN. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-5-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-10perf tools: Support user regs and stack in sample parsingJiri Olsa1-0/+12
Adding following info to be parsed out of the event sample: - user register set - user stack dump Both are global and specific to all events within the session. This info will be used in the unwind patches coming in shortly. Adding simple output printout (report -D) for both register and stack dumps. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-11-git-send-email-jolsa@redhat.com [ Use evsel->attr.sample_regs_user ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-02perf evsel: Adopt parse_sample method from perf_eventArnaldo Carvalho de Melo1-3/+0
Since we need evsel->{attr.{sample_{id_all,type}},sample_size}, reducing the number of parameters tools have to pass. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-wdtmgak0ihgsmw1brb54a8h4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-09perf tools: Add code to support PERF_SAMPLE_BRANCH_STACKRoberto Agostino Vitillo1-0/+1
This patch adds: - ability to parse samples with PERF_SAMPLE_BRANCH_STACK - sort on branches (dso_from, symbol_from, dso_to, symbol_to, mispredict) - build histograms on branches Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: robert.richter@amd.com Cc: ming.m.lin@intel.com Cc: andi@firstfloor.org Cc: asharma@fb.com Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1328826068-11713-12-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-12perf tools: Add ability to synthesize event according to a sampleAndrew Vagin1-0/+3
It's the counterpart of perf_session__parse_sample. v2: fixed mistakes found by David Ahern. v3: s/data/sample/ s/perf_event__change_sample/perf_event__synthesize_sample Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Arun Sharma <asharma@fb.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: devel@openvz.org Link: http://lkml.kernel.org/r/1323266161-394927-3-git-send-email-avagin@openvz.org Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02perf event: Introduce perf_event__fprintfArnaldo Carvalho de Melo1-0/+6
So that tools like 'perf test' can print the events when in verbose mode, for instance. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-xnovdqfi25nc48gy6604k7yp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28perf tools: Rename perf_event_ops to perf_toolArnaldo Carvalho de Melo1-11/+11
To better reflect that it became the base class for all tools, that must be in each tool struct and where common stuff will be put. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qgpc4msetqlwr8y2k7537cxe@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28perf tools: Resolve machine earlier and pass it to perf_event_opsArnaldo Carvalho de Melo1-12/+9
Reducing the exposure of perf_session further, so that we can use the classes in cases where no perf.data file is created. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28perf tools: Pass tool context in the the perf_event_ops functionsArnaldo Carvalho de Melo1-12/+26
So that we don't need to have that many globals. Next steps will remove the 'session' pointer, that in most cases is not needed. Then we can rename perf_event_ops to 'perf_tool' that better describes this class hierarchy. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-wp4djox7x6w1i2bab1pt4xxp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf tool: Fix endianness handling of u32 data in samplesDavid Ahern1-1/+1
Currently, analyzing PPC data files on x86 the cpu field is always 0 and the tid and pid are backwards. For example, analyzing a PPC file on PPC the pid/tid fields show: rsyslogd 1210/1212 and analyzing the same PPC file using an x86 perf binary shows: rsyslogd 1212/1210 The problem is that the swap_op method for samples is perf_event__all64_swap which assumes all elements in the sample_data struct are u64s. cpu, tid and pid are u32s and need to be handled individually. Given that the swap is done before the sample is parsed, the simplest solution is to undo the 64-bit swap of those elements when the sample is parsed and do the proper swap. The RAW data field is generic and perf cannot have programmatic knowledge of how to treat that data. Instead a warning is given to the user. Thanks to Anton Blanchard for providing a data file for a mult-CPU PPC system so I could verify the fix for the CPU fields. v3 -> v4: - fixed use of WARN_ONCE v2 -> v3: - used WARN_ONCE for message regarding raw data - removed struct wrapper around union - fixed whitespace issues v1 -> v2: - added a union for undoing the byte-swap on u64 and redoing swap on u32's to address compiler errors (see git commit 65014ab3) Cc: Anton Blanchard <anton@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1315321946-16993-1-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-06-03perf evlist: Don't die if sample_{id_all|type} is invalidArnaldo Carvalho de Melo1-2/+0
Fixes two more cases where the python binding would not load: . Not finding die(), which it shouldn't anyway, not good to just stop the world because some particular perf.data file is invalid, just propagate the error to the caller. . Not finding perf_sample_size: fix it by moving it from event.c to evsel, where it belongs, as most cases are moving to operate on an evsel object.o One of the fixed problems: [root@emilia ~]# python >>> import perf Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: perf_sample_size >>> [root@emilia ~]# Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1hkj7b2cvgbfnoizsekjb6c9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-22perf tools: Pre-check sample size before parsingFrederic Weisbecker1-1/+11
Check that the total size of the sample fields having a fixed size do not exceed the one of the whole event. This robustifies the sample parsing. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com>
2011-02-11Merge remote branch 'acme/perf/urgent' into perf/coreArnaldo Carvalho de Melo1-2/+4
Fixups due to rename of event_t routines from event__ to perf_event__ done in perf/core. Conflicts: tools/perf/builtin-record.c tools/perf/builtin-top.c tools/perf/util/event.c tools/perf/util/event.h Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-10perf tools: Fix thread_map event synthesizing in top and recordArnaldo Carvalho de Melo1-2/+4
Jeff Moyer reported these messages: Warning: ... trying to fall back to cpu-clock-ticks couldn't open /proc/-1/status couldn't open /proc/-1/maps [ls output] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.008 MB perf.data (~363 samples) ] That lead me and David Ahern to see that something was fishy on the thread synthesizing routines, at least for the case where the workload is started from 'perf record', as -1 is the default for target_tid in 'perf record --tid' parameter, so somehow we were trying to synthesize the PERF_RECORD_MMAP and PERF_RECORD_COMM events for the thread -1, a bug. So I investigated this and noticed that when we introduced support for recording a process and its threads using --pid some bugs were introduced and that the way to fix it was to instead of passing the target_tid to the event synthesizing routines we should better pass the thread_map that has the list of threads for a --pid or just the single thread for a --tid. Checked in the following ways: On a 8-way machine run cyclictest: [root@emilia ~]# perf record cyclictest -a -t -n -p99 -i100 -d50 policy: fifo: loadavg: 0.00 0.13 0.31 2/139 28798 T: 0 (28791) P:99 I:100 C: 25072 Min: 4 Act: 5 Avg: 6 Max: 122 T: 1 (28792) P:98 I:150 C: 16715 Min: 4 Act: 6 Avg: 5 Max: 27 T: 2 (28793) P:97 I:200 C: 12534 Min: 4 Act: 5 Avg: 4 Max: 8 T: 3 (28794) P:96 I:250 C: 10028 Min: 4 Act: 5 Avg: 5 Max: 96 T: 4 (28795) P:95 I:300 C: 8357 Min: 5 Act: 6 Avg: 5 Max: 12 T: 5 (28796) P:94 I:350 C: 7163 Min: 5 Act: 6 Avg: 5 Max: 12 T: 6 (28797) P:93 I:400 C: 6267 Min: 4 Act: 5 Avg: 5 Max: 9 T: 7 (28798) P:92 I:450 C: 5571 Min: 4 Act: 5 Avg: 5 Max: 9 ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.108 MB perf.data (~4719 samples) ] [root@emilia ~]# This will create one extra thread per CPU: [root@emilia ~]# tuna -t cyclictest -CP thread ctxt_switches pid SCHED_ rtpri affinity voluntary nonvoluntary cmd 28825 OTHER 0 0xff 2169 671 cyclictest 28832 FIFO 93 6 52338 1 cyclictest 28833 FIFO 92 7 46524 1 cyclictest 28826 FIFO 99 0 209360 1 cyclictest 28827 FIFO 98 1 139577 1 cyclictest 28828 FIFO 97 2 104686 0 cyclictest 28829 FIFO 96 3 83751 1 cyclictest 28830 FIFO 95 4 69794 1 cyclictest 28831 FIFO 94 5 59825 1 cyclictest [root@emilia ~]# So we should expect only samples for the above 9 threads when using the --dump-raw-trace|-D perf report switch to look at the column with the tid: [root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c 629 28825 110 28826 491 28827 308 28828 198 28829 621 28830 225 28831 203 28832 89 28833 [root@emilia ~]# So for workloads started by 'perf record' seems to work, now for existing workloads, just run cyclictest first, without 'perf record': [root@emilia ~]# tuna -t cyclictest -CP thread ctxt_switches pid SCHED_ rtpri affinity voluntary nonvoluntary cmd 28859 OTHER 0 0xff 594 200 cyclictest 28864 FIFO 95 4 16587 1 cyclictest 28865 FIFO 94 5 14219 1 cyclictest 28866 FIFO 93 6 12443 0 cyclictest 28867 FIFO 92 7 11062 1 cyclictest 28860 FIFO 99 0 49779 1 cyclictest 28861 FIFO 98 1 33190 1 cyclictest 28862 FIFO 97 2 24895 1 cyclictest 28863 FIFO 96 3 19918 1 cyclictest [root@emilia ~]# and then later did: [root@emilia ~]# perf record --pid 28859 sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.027 MB perf.data (~1195 samples) ] [root@emilia ~]# To collect 3 seconds worth of samples for pid 28859 and its children: [root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c 15 28859 33 28860 19 28861 13 28862 13 28863 10 28864 11 28865 9 28866 255 28867 [root@emilia ~]# Works, last thing is to check if looking at just one of those threads also works: [root@emilia ~]# perf record --tid 28866 sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.006 MB perf.data (~242 samples) ] [root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c 3 28866 [root@emilia ~]# Works too. Reported-by: Jeff Moyer <jmoyer@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29perf tools: Kill event_t typedef, use 'union perf_event' insteadArnaldo Carvalho de Melo1-33/+36
And move the event_t methods to the perf_event__ too. No code changes, just namespace consistency. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29perf tools: Rename 'struct sample_data' to 'struct perf_sample'Arnaldo Carvalho de Melo1-9/+9
Making the namespace more uniform. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-24perf tools: Move event__parse_sample to evsel.cArnaldo Carvalho de Melo1-2/+3
To avoid linking more stuff in the python binding I'm working on, future csets will make the sample type be taken from the evsel itself, but for that we need to first have one file per cpu and per sample_type, not a single perf.data file. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf session: Consolidate the dump codeThomas Gleixner1-0/+1
The dump code used by perf report -D is scattered all over the place. Move it to separate functions. Acked-by: Ian Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.625434869@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf event: Prevent unbound event__name array accessThomas Gleixner1-1/+1
event__name[] is missing an entry for PERF_RECORD_FINISHED_ROUND, but we happily access the array from the dump code. Make event__name[] static and provide an accessor function, fix up all callers and add the missing string. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.432593943@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-04perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ eventsArnaldo Carvalho de Melo1-3/+4
So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-04perf session: Parse sample earlierArnaldo Carvalho de Melo1-6/+14
At perf_session__process_event, so that we reduce the number of lines in eache tool sample processing routine that now receives a sample_data pointer already parsed. This will also be useful in the next patch, where we'll allow sample the identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu, timestamp) just after before every event. Also validate callchains in perf_session__process_event, i.e. as early as possible, and keep a counter of the number of events discarded due to invalid callchains, warning the user about it if it happens. There is an assumption that was kept that all events have the same sample_type, that will be dealt with in the future, when this preexisting limitation will be removed. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-08-04perf: expose event__process functionSrikar Dronamraju1-0/+1
The event__process function is useful in processing /proc/<pid>/maps. All of the functions that are called from event__process are defined in util/event.c. Though its defined in builtin-top.c, it could be reused for perf probe for uprobes. Hence moving it to util/event.c and exporting the function. LKML-Reference: <20100802123851.GD22812@linux.vnet.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-05perf tools: Make event__preprocess_sample parse the sampleArnaldo Carvalho de Melo1-2/+3
Simplifying the tools that were using both in sequence and allowing upcoming simplifications, such as Arun's patch to sort by cpus. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-14perf hist: Make event__totals per histsArnaldo Carvalho de Melo1-0/+2
This is one more thing that started global but are more useful per hist or per session. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf hist: Introduce hists class and move lots of methods to itArnaldo Carvalho de Melo1-14/+0
In cbbc79a we introduced support for multiple events by introducing a new "event_stat_id" struct and then made several perf_session methods receive a point to it instead of a pointer to perf_session, and kept the event_stats and hists rb_tree in perf_session. While working on the new newt based browser, I realised that it would be better to introduce a new class, "hists" (short for "histograms"), renaming the "event_stat_id" struct and the perf_session methods that were really "hists" methods, as they manipulate only struct hists members, not touching anything in the other perf_session members. Other optimizations, such as calculating the maximum lenght of a symbol name present in an hists instance will be possible as we add them, avoiding a re-traversal just for finding that information. The rationale for the name "hists" to replace "event_stat_id" is that we may have multiple sets of hists for the same event_stat id, as, for instance, the 'perf diff' tool has, so event stat id is not what characterizes what this struct and the functions that manipulate it do. Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-09perf: Introduce a new "round of buffers read" pseudo eventFrederic Weisbecker1-1/+2
In order to provide a more rubust and deterministic reordering algorithm, we need to know when we reach a point where we just did a pass through over every counter buffers to read every thing they had. This patch introduces a new PERF_RECORD_FINISHED_ROUND pseudo event that only consist in an event header and doesn't need to contain anything. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2010-04-27perf tools: Rename "kernel_info" to "machine"Arnaldo Carvalho de Melo1-2/+2
struct kernel_info and kerninfo__ are too vague, what they really describe are machines, virtual ones or hosts. There are more changes to introduce helpers to shorten function calls and to make more clear what is really being done, but I left that for subsequent patches. Cc: Avi Kivity <avi@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-19perf: 'perf kvm' tool for monitoring guest performance from hostZhang, Yanmin1-3/+7
Here is the patch of userspace perf tool. Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-14perf: Convert perf header build_ids into build_id eventsTom Zanussi1-0/+2
Bypasses the build_id perf header code and replaces it with a synthesized event and processing function that accomplishes the same thing, used when reading/writing perf data to/from a pipe. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-9-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-14perf: Convert perf tracing data into a tracing_data eventTom Zanussi1-0/+7
Bypasses the tracing_data perf header code and replaces it with a synthesized event and processing function that accomplishes the same thing, used when reading/writing perf data to/from a pipe. The tracing data is pretty large, and this patch doesn't attempt to break it down into component events. The tracing_data event itself doesn't actually contain the tracing data, rather it arranges for the event processing code to skip over it after it's read, using the skip return value added to the event processing loop in a previous patch. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-8-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-14perf: Convert perf event types into event type eventsTom Zanussi1-0/+14
Bypasses the event type perf header code and replaces it with a synthesized event and processing function that accomplishes the same thing, used when reading/writing perf data to/from a pipe. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-7-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-14perf: Convert perf header attrs into attr eventsTom Zanussi1-1/+9
Bypasses the attr perf header code and replaces it with a synthesized event and processing function that accomplishes the same thing, used when reading/writing perf data to/from a pipe. Making the attrs into events allows them to be streamed over a pipe along with the rest of the header data (in later patches). It also paves the way to allowing events to be added and removed from perf sessions dynamically. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-6-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 19:21:44 +0000