summaryrefslogtreecommitdiff
path: root/tools/hv
AgeCommit message (Collapse)AuthorFilesLines
2016-12-13Merge tag 'char-misc-4.10-rc1' of ↵Linus Torvalds3-20/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
2016-12-06tools: hv: Enable network manager for bonding scripts on RHELHaiyang Zhang1-2/+2
We found network manager is necessary on RHEL to make the synthetic NIC, VF NIC bonding operations handled automatically. So, enabling network manager here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06Tools: hv: kvp: configurable external scripts pathAlex Fluter1-3/+8
error when running hypervkvpd: $ sudo ./hv_kvp_daemon -n sh: hv_get_dns_info: command not found sh: hv_get_dhcp_info: command not found sh: hv_get_dns_info: command not found sh: hv_get_dhcp_info: command not found The external scripts are not installed in system path, adding a configurable macro. Signed-off-by: Alex Fluter <afluter@yandex.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07tools: hv: remove unnecessary header files and netlink related codeWeibing Zhang2-14/+0
Remove unnecessary header files and netlink related code as the daemons do not use netlink to communicate with the kernel now. Signed-off-by: Weibing Zhang <atheism.zhang@gmail.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07tools: hv: fix a compile warning in snprintfWeibing Zhang1-1/+1
hv_kvp_daemon.c: In function .kvp_mac_to_if_name.: hv_kvp_daemon.c:705:2: warning: format not a string literal and no format arguments [-Wformat-security] snprintf(dev_id, sizeof(dev_id), kvp_net_dir); ^ hv_kvp_daemon.c:705:2: warning: format not a string literal and no format arguments [-Wformat-security] Signed-off-by: Weibing Zhang <atheism.zhang@gmail.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07tools: hv: remove unnecessary link flagWeibing Zhang1-2/+1
The link flag pthread is not needed. Signed-off-by: Weibing Zhang <atheism.zhang@gmail.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02Drivers: hv: utils: Check VSS daemon is listening before a hot backupAlex Ng1-0/+3
Hyper-V host will send a VSS_OP_HOT_BACKUP request to check if guest is ready for a live backup/snapshot. The driver should respond to the check only if the daemon is running and listening to requests. This allows the host to fallback to standard snapshots in case the VSS daemon is not running. Signed-off-by: Alex Ng <alexng@messages.microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31Tools: hv: kvp: ensure kvp device fd is closed on execVitaly Kuznetsov1-1/+1
KVP daemon does fork()/exec() (with popen()) so we need to close our fds to avoid sharing them with child processes. The immediate implication of not doing so I see is SELinux complaining about 'ip' trying to access '/dev/vmbus/hv_kvp'. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-12tools: hv: Add a script to help bonding synthetic and VF NICsHaiyang Zhang1-0/+193
This script helps to create bonding network devices based on synthetic NIC (the virtual network adapter usually provided by Hyper-V) and the matching VF NIC (SRIOV virtual function). So the synthetic NIC and VF NIC can function as one network device, and fail over to the synthetic NIC if VF is down. Mayjor distros (RHEL, Ubuntu, SLES) supported by Hyper-V are supported by this script. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-01tools: hv: lsvmbus: add pci pass-through UUIDVitaly Kuznetsov1-0/+1
lsvmbus keeps its own copy of all VMBus UUIDs, add PCIe pass-through device there to not report 'Unknown' for such devices. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07tools/hv: Use include/uapi with __EXPORTED_HEADERS__Kamal Mostafa1-0/+2
Use the local uapi headers to keep in sync with "recently" added #define's (e.g. VSS_OP_REGISTER1). Fixes: 3eb2094c59e8 ("Adding makefile for tools/hv") Cc: <stable@vger.kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-14tools: hv: vss: fix the write()'s argument: error -> vss_msgDexuan Cui1-1/+1
Fix the write()'s argument in the daemon code. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-14tools: hv: remove repeated HV_FCOPY stringOlaf Hering1-2/+2
HV_FCOPY is already used as identifier in syslog. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-14tools: hv: report ENOSPC errors in hv_fcopy_daemonOlaf Hering1-3/+17
Currently some "Unspecified error 0x80004005" is reported on the Windows side if something fails. Handle the ENOSPC case and return ERROR_DISK_FULL, which allows at least Copy-VMFile to report a meaning full error. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05tools: hv: add a python script lsvmbus to list VMBus devicesDexuan Cui1-0/+101
By default lsvmbus lists all the devices in the VMBus. With -v or -vv, more information is printed, including the VMBus Rel_ID, class ID, device ID and which channel is bound to which virtual processor, etc. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24Drivers: hv: fcopy: full handshake supportVitaly Kuznetsov1-0/+15
Introduce FCOPY_VERSION_1 to support kernel replying to the negotiation message with its own version. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24Drivers: hv: vss: full handshake supportVitaly Kuznetsov1-0/+14
Introduce VSS_OP_REGISTER1 to support kernel replying to the negotiation message with its own version. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24Tools: hv: vss: use misc char device to communicate with kernelVitaly Kuznetsov1-114/+25
Use /dev/vmbus/hv_vss instead of netlink. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24Tools: hv: kvp: use misc char device to communicate with kernelVitaly Kuznetsov1-135/+31
Use /dev/vmbus/hv_kvp instead of netlink. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25hv: hypervvssd: call endmntent before call setmntent againVaughan Cao1-2/+8
If freeze fails, vss_operate will re-enter itself to thaw. But it forgets to call endmntent() before it recalls setmntent() again. Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25tools: hv: fcopy_daemon: support >2GB files for x86_32 guestDexuan Cui1-1/+1
Without this patch, hv_fcopy_daemon's hv_copy_data() -> pwrite() will fail for >2GB file offset. The current char-next branch is broken and this patch fixes the bug. Signed-off-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25Tools: hv: do not add redundant '/' in hv_start_fcopy()Vitaly Kuznetsov1-6/+0
We don't need to add additional '/' to smsg->path_name as snprintf("%s/%s") does the right thing. Without the patch we get doubled '//' in the log message. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25Tools: hv: address compiler warnings for hv_fcopy_daemon.cVitaly Kuznetsov1-2/+2
This patch addresses two types of compiler warnings: ... warning: unused variable .fd. [-Wunused-variable] and ... warning: format .%s. expects argument of type .char *., but argument 5 has type .__u16 *. [-Wformat=] Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25Tools: hv: address compiler warnings for hv_kvp_daemon.cVitaly Kuznetsov1-13/+12
This patch addresses two types of compiler warnings: ... warning: comparison between signed and unsigned integer expressions [-Wsign-compare] and ... warning: pointer targets in passing argument N of .kvp_.... differ in signedness [-Wpointer-sign] Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25Tools: hv: remove unused bytes_written from kvp_update_file()Vitaly Kuznetsov1-3/+1
fwrite() does not actually return the number of bytes written and this value is being ignored anyway and ferror() is being called to check for an error. As we assign to this variable and never use it we get the following compile-time warning: hv_kvp_daemon.c:149:9: warning: variable .bytes_written. set but not used [-Wunused-but-set-variable] Remove bytes_written completely. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12tools: hv: kvp_daemon: make IPv6-only-injection workDexuan Cui1-6/+6
In the case the host only injects an IPv6 address, the dhcp_enabled flag is true (it's only for IPv4 according to Hyper-V host team), but we still need to proceed to parse the IPv6 information. Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-By: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12tools: hv: Makefile: Add hv_fcopy_daemon to MakefileMatej Muzila1-2/+2
hv_fcopy_daemon is not mentioned in Makefile so it must be built manually. Add hv_fcopy_daemon to Makefile. Signed-off-by: Matej Muzila <mmuzila@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26tools: hv: ignore ENOBUFS and ENOMEM in the KVP daemonDexuan Cui1-0/+14
Under high memory pressure and very high KVP R/W test pressure, the netlink recvfrom() may transiently return ENOBUFS to the daemon -- we found this during a 2-week stress test. We'd better not terminate the daemon on the failure, because a typical KVP user will re-try the R/W and hopefully it will succeed next time. We can also ignore the errors on sending. Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26Tools: hv: vssdaemon: skip all filesystems mounted readonlyVitaly Kuznetsov1-1/+1
Instead of making a list of exceptions for readonly filesystems in addition to iso9660 we already have it is better to skip freeze operation for all readonly-mounted filesystems. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26Tools: hv: vssdaemon: report freeze errorsVitaly Kuznetsov1-4/+12
When ioctl(fd, FIFREEZE, 0) results in an error we cannot report it to syslog instantly since that can cause write to a frozen disk. However, the name of the filesystem which caused the error and errno are valuable and we would like to get a nice human-readable message in the log. Save errno before calling vss_operate(VSS_OP_THAW) and report the error right after. Unfortunately, FITHAW errors cannot be reported the same way as we need to finish thawing all filesystems before calling syslog(). We should also avoid calling endmntent() for the second time in case we encountered an error during freezing of '/' as it usually results in SEGSEGV. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tools: hv: introduce -n/--no-daemon optionVitaly Kuznetsov3-6/+94
All tools/hv daemons do mandatory daemon() on startup. However, no pidfile is created, this make it difficult for an init system to track such daemons. Modern linux distros use systemd as their init system. It can handle the daemonizing by itself, however, it requires a daemon to stay in foreground for that. Some distros already carry distro-specific patch for hv tools which switches off daemon(). Introduce -n/--no-daemon option for all 3 daemons in hv/tools. Parse options with getopt() to make this part easily expandable. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07Tools: hv: vssdaemon: ignore the EBUSY on multiple freezing the same partitionDexuan Cui1-8/+40
If a partition appears mounted more than once in /proc/mounts, vss_do_freeze() succeeds only for the first time and gets EBUSY (on freeze) or EINVAL (on thaw) for the second time. The patch ignores these to make the backup feature work. Also improved the error handling in case a freeze operation fails. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09Tools: hv: fix file overwriting of hv_fcopy_daemonYue Zhang1-1/+2
hv_fcopy_daemon fails to overwrite a file if the target file already exits. Add O_TRUNC flag on opening. Signed-off-by: Yue Zhang <yuezha@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16Tools: hv: Handle the case when the target file exists correctlyK. Y. Srinivasan1-1/+3
Return the appropriate error code and handle the case when the target file exists correctly. This fixes a bug. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18Drivers: hv: Implement the file copy serviceK. Y. Srinivasan1-0/+195
Implement the file copy service for Linux guests on Hyper-V. This permits the host to copy a file (over VMBUS) into the guest. This facility is part of "guest integration services" supported on the Windows platform. Here is a link that provides additional details on this functionality: http://technet.microsoft.com/en-us/library/dn464282.aspx In V1 version of the patch I have addressed comments from Olaf Hering <olaf@aepfle.de> and Dan Carpenter <dan.carpenter@oracle.com> In V2 version of this patch I did some minor cleanup (making some globals static). In V4 version of the patch I have addressed all of Olaf's most recent set of comments/concerns. In V5 version of the patch I had addressed Greg's most recent comments. I would like to thank Greg for suggesting that I use misc device; it has significantly simplified the code. In V6 version of the patch I have cleaned up error message based on Olaf's comments. I have also rebased the patch based on the current tip. In this version of the patch, I have addressed the latest comments from Greg. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-15Tools: hv: vssdaemon: Ignore VFAT mounts during the Freeze operationK. Y. Srinivasan1-0/+2
If the guest has a FAT file system mounted, skip it during the FREEZE operation. With this change we can support host initiated backup of the guest even when the guest may have FAT file systems mounted. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-15Adding makefile for tools/hvBjarke Istrup Pedersen1-0/+13
Currently, there is no makefile for the Hyper-V tools. This patch adds the missing makefile, and adds it to the main tools makefile. Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08Tools: hv: remove inclusion of linux/types.hOlaf Hering2-2/+0
With very old libc headers the inclusion of sys/types.h causes conflicts with linux/types.h. Since the latter is not required anyway, remove it from the source files. If any of the headers really needs linux/types.h it has to include it itself. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26Tools: hv: use single send+recv bufferOlaf Hering2-11/+7
send_buffer is used only once during registration. To reduce runtime memory usage reuse the recv_buffer for registration. Also use NLMSG_LENGTH instead of NLMSG_HDRLEN to take alignment into account. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26Tools: hv: cache FQDN in kvp_daemon to avoid timeoutsOlaf Hering1-7/+12
kvp_daemon does some operations which take an unpredicable amount of time. In addition the kernel driver gives the kvp_daemon a 5 second timeout to respond to message from the host. If an operation such as getaddrinfo takes a long time and the timeout triggers then netlink errors occour. As a result of such errors the daemon just terminates and the service becomes unavailable. Idendifying and fixing these shortcomings in the kernel-userland communication protocol will be done in separate patches. This change fixes just one obvious timeout bug. Update kvp_get_domain_name to not return a value, better diagnostic for the consumer of the hostname string, remove trailing newline in error case, use snprintf to not overrun output buffer, get hostname only once and return the cached result. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12Tools: hv: use full nlmsghdr in netlink_sendOlaf Hering2-20/+10
There is no need to have a nlmsghdr pointer to another temporary buffer. Instead use a full struct nlmsghdr. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12Tools: hv: correct payload size in netlink_sendOlaf Hering2-2/+2
netlink_send is supposed to send just the cn_msg+hv_kvp_msg via netlink. Currently it sets an incorrect iovec size, as reported by valgrind. In the case of registering with the kernel the allocated buffer is large enough to hold nlmsghdr+cn_msg+hv_kvp_msg, no overrun happens. In the case of responding to the kernel the cn_msg is located in the middle of recv_buffer, after the nlmsghdr. Currently the code in netlink_send adds also the size of nlmsghdr to the payload. But nlmsghdr is a separate iovec. This leads to an (harmless) out-of-bounds access when the kernel processes the iovec. Correct the iovec size of the cn_msg to be just cn_msg + its payload. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Tools: hv: check return value of system in hv_kvp_daemonOlaf Hering1-1/+5
hv_kvp_daemon.c: In function 'main': hv_kvp_daemon.c:1441:8: warning: ignoring return value of 'daemon', declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Tools: hv: in kvp_set_ip_info free mac_addr right after usageOlaf Hering1-2/+1
... to simplify error path in upcoming changes. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-02Tools: hv: check return value of daemon to fix compiler warning.Olaf Hering1-1/+2
hv_kvp_daemon.c: In function 'main': hv_kvp_daemon.c:1441:8: warning: ignoring return value of 'daemon', declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-02Tools: hv: fix send/recv buffer allocationOlaf Hering2-6/+24
hv_kvp_daemon fails to start in current openSuSE 13.1 snapshots because the kvp_send_buffer is too small to hold cn_msg+hv_kvp_msg, the very first sendmsg returns with EFAULT. In addition it fixes the Network info tab in Windows Server 2012R2 in SLES11. Adjust the code in kvp and vss daemon to allocate the needed buffers at runtime. To keep the code simple, the buffer_len includes also the nlmsghdr, although only the recv_buffer needs this extra space. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29Merge 3.11-rc3 into char-misc-next.Greg Kroah-Hartman1-2/+3
This resolves a merge issue with: drivers/misc/mei/init.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26tools: hv: Check return value of setsockopt callTomas Hozza1-1/+5
Check return value of setsockopt call and if it fails print error to the system log and exit with non-zero value. Signed-off-by: Tomas Hozza <thozza@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26tools: hv: Check return value of poll callTomas Hozza1-1/+10
Check return value of poll call and if it fails print error to the system log. If errno is EINVAL then exit with non-zero value otherwise continue the while loop and call poll again. Signed-off-by: Tomas Hozza <thozza@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26tools: hv: Improve error logging in VSS daemon.Tomas Hozza1-4/+6
Use errno and strerror() when logging errors to provide more information. Signed-off-by: Tomas Hozza <thozza@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 03:06:03 +0000