summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2012-03-22Merge tag 'regmap-3.4' of ↵Linus Torvalds1-24/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "Things are really quieting down with the regmap API, while we're still seeing a trickle of new features coming in they're getting much smaller than they were. It's also nice to have some features which support other subsystems building infrastructure on top of regmap. Highlights include: - Support for padding between the register and the value when interacting with the device, sometimes needed for fast interfaces. - Support for applying register updates to the device when restoring the register state. This is intended to be used to apply updates supplied by manufacturers for tuning the performance of the device (many of which are to undocumented registers which aren't otherwise covered). - Support for multi-register operations on cached registers. - Support for syncing only part of the register cache. - Stubs and parameter query functions intended to make it easier for other subsystems to build infrastructure on top of the regmap API. plus a few driver updates making use of the new features which it was easier to merge via this tree." * tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (41 commits) regmap: Fix future missing prototype of devres_alloc() and friends regmap: Rejig struct declarations for stubbed API regmap: Fix rbtree block base in sync regcache: Make sure we sync register 0 in an rbtree cache regmap: delete unused module.h from drivers/base/regmap files regmap: Add stub for regcache_sync_region() mfd: Improve performance of later WM1811 revisions regmap: Fix x86_64 breakage regmap: Allow drivers to sync only part of the register cache regmap: Supply ranges to the sync operations regmap: Add tracepoints for cache only and cache bypass regmap: Mark the cache as clean after a successful sync regmap: Remove default cache sync implementation regmap: Skip hardware defaults for LZO caches regmap: Expose the driver name in debugfs mfd: wm8400: Convert to devm_regmap_init_i2c() mfd: wm831x: Convert to devm_regmap_init() mfd: wm8994: Convert to devm_regmap_init() mfd/ASoC: Convert WM8994 driver to use regmap patches mfd: Add __devinit and __devexit annotations in wm8994 ...
2012-03-22Merge tag 'firewire-updates' of ↵Linus Torvalds2-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull IEEE 1394 (FireWire) subsystem updates post v3.3 from Stefan Richter: - Some SBP-2 initiator fixes, side product from ongoing work on a target. - Reintroduction of an isochronous I/O feature of the older ieee1394 driver stack (flush buffer completions); it was evidently rarely used but not actually unused. Matching libraw1394 code is already available. - Be sure to prefix all kernel log messages with device name or card name, and other logging related cleanups. - Misc other small cleanups, among them a small API change that affects sound/firewire/ too. Clemens Ladisch is aware of it. * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (26 commits) firewire: allow explicit flushing of iso packet completions firewire: prevent dropping of completed iso packet header data firewire: ohci: factor out iso completion flushing code firewire: ohci: simplify iso header pointer arithmetic firewire: ohci: optimize control bit checks firewire: ohci: remove unused excess_bytes field firewire: ohci: copy_iso_headers(): make comment match the code firewire: cdev: fix IR multichannel event documentation firewire: ohci: fix too-early completion of IR multichannel buffers firewire: ohci: move runtime debug facility out of #ifdef firewire: tone down some diagnostic log messages firewire: sbp2: replace a GFP_ATOMIC allocation firewire: sbp2: Fix SCSI sense data mangling firewire: sbp2: Ignore SBP-2 targets on the local node firewire: sbp2: Take into account Unit_Unique_ID firewire: nosy: Use the macro DMA_BIT_MASK(). firewire: core: convert AR-req handler lock from _irqsave to _bh firewire: core: fix race at address_handler unregistration firewire: core: remove obsolete comment firewire: core: prefix log messages with card name ...
2012-03-22Merge tag 'sound-3.4' of ↵Linus Torvalds222-11199/+17497
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull updates of sound stuff from Takashi Iwai: "Here is the first big update chunk of sound stuff for 3.4-rc1. In the common sound infrastructure, there are a few changes for dynamic PCM support (used in ASoC) and a few clean-ups. Majority of changes are found, as usual, in HD-audio and ASoC. Some highlights of HD-audio changes: - All the long-standing static quirk codes for Realtek codec were finally removed by fixing and extending the Realtek auto-parser. - The mute-LED control is standardized over all HD-audio codec drivers using the extended vmaster hook. - The vmaster slave mixer elements are initialized to 0dB as default so that the user won't be annoyed by the silent output after updates, e.g. due to the additions of new elements. - Other many fix-ups for the misc HD-audio devices. In the ASoC side, this is a very active release, including a quite a few framework enhancements. Some highlights: - Support for widgets not associated with a CODEC, an important part of the dynamic PCM framework. - A library factoring out the common code shared by dmaengine based DMA drivers contributed by Lars-Peter Clausen. This will save a lot of code and make it much easier to deploy enhancements to dmaengine. - Support for binary controls, used for providing runtime configuration of algorithm coefficients. - A new DAPM widget type for regulator supplies allowing drivers for devices that can power down unused supplies while active to do without any per-driver code. - DAPM widgets for DAIs, initially giving a speed boost for playback startup and shutdown and also the basis for CODEC<->CODEC DAI link support. - Support for specifying the number of significant bits on audio interfaces, useful for allowing applications to know how much effort to put into generating data for a larger sample format. - Conversion of the FSI driver used on some SH processors to DMAEngine. - Conversion of EP93xx drivers to DMAEngine. - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200. - Move audmux driver from arc/arm to sound/soc - McBSP move from arch/ to sound/ and updates Also, a few small updates and fixes for other drivers like au88x0, ymfpci, USB 6fire, USB usx2yaudio are included." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (446 commits) ASoC: wm8994: Provide VMID mode control and fix default sequence ASoC: wm8994: Add missing break in resume ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF ASoC: pxa-ssp: atomically set stream active masks ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master ASoC: Samsung: Added to support mono recording ALSA: hda - Fix build with CONFIG_PM=n ALSA: au88x0 - Avoid possible Oops at unbinding ALSA: usb-audio - Fix build error by consitification of rate list ASoC: core: Fix obscure leak of runtime array ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link() ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list ASoC: wm8996: Add 44.1kHz support ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVE ASoC: mx27vis-aic32x4: Convert it to platform driver ALSA: hda - fix printing of high HDMI sample rates ALSA: ymfpci - Fix legacy registers on S3/S4 resume ALSA: control - Fixe a trailing white space error ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook() ALSA: hda - Add "Mute-LED Mode" enum control ...
2012-03-21Merge tag 'asoc-3.4' of ↵Takashi Iwai8-97/+239
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus Last minute ASoC updates for 3.4 There's a couple of small features here that were added late on but have been in -next in my tree and some bug fixes. The wm_hubs stuff is actually bug fixes - the stuff that's currently in 3.4 is a half way house between the two solutions that the latest change allows the machine to select between.
2012-03-20Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
2012-03-19ASoC: wm8994: Provide VMID mode control and fix default sequenceMark Brown2-39/+155
The optimal management of VMID depends on a number of factors which vary dynamically at runtime, for example the connection to a system docking station. In some circumstances it is desirable to keep VMID enabled all the time, in others it is desirable to aggressively power it up and down. Provide a callback allowing machine driver to configure either the normal power up/down mode (WM8994_VMID_MODE_NORMAL) or to maintain VMID even when idle (WM8994_VMID_MODE_FORCE). This callback, wm8994_vmid_mode(), should be called with the CODEC lock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-19ASoC: wm8994: Add missing break in resumeMark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-19ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUFMark Brown1-11/+5
It can just be enabled all the time with no impact. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-19ASoC: pxa-ssp: atomically set stream active masksDaniel Mack1-25/+36
PXA's SSP engine fails to take its current channel phase into account when enabling a stream while the engine is already running. This results in randomly swapped left/right channels on either the record or the playback side, depending on which one was enabled first. The following patch fixes this by factoring out the bit field modifications in question to a separate function that pauses the engine temporarily, modifies the bits and kicks it off again afterwards. Appearantly, a transition of SSCR0_SSE syncs both directions properly. The patch has been rolled out to quite a number of devices over the last weeks and seems to fix the issue reliably. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-03-18Merge branch 'topic/jack' into for-linusTakashi Iwai1-2/+2
2012-03-18Merge branch 'topic/asoc' into for-linusTakashi Iwai173-6039/+14905
2012-03-18Merge branch 'topic/misc' into for-linusTakashi Iwai30-190/+606
2012-03-18Merge branch 'topic/hda' into for-linusTakashi Iwai17-4892/+1766
2012-03-17ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the masterTimur Tabi1-8/+16
The WM8776 codec driver requires the machine driver to set one of the SND_SOC_DAIFMT_CBx_xxx values. The P1022DS machine driver should be setting SND_SOC_DAIFMT_CBM_CFM, but since that value was zero, no one noticed. Commit 75d9ac46 ("ASoC: Allow DAI formats to be specified in the dai_link"), however, changed the value of SND_SOC_DAIFMT_CBM_CFM from zero to a non-zero value, which means that it now needs to be specifically set by the machine driver. We also set SND_SOC_DAIFMT_NB_NF, for the same reason. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-03-16ASoC: Samsung: Added to support mono recordingSangsu Park1-1/+12
The dma size will be changed by requested number of channel(mono/stereo) from platform. For mono recording, channels_min value should be 1. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-16ALSA: hda - Fix build with CONFIG_PM=nTakashi Iwai1-0/+9
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-16ALSA: au88x0 - Avoid possible Oops at unbindingTakashi Iwai1-1/+1
The irq handler must check whether the MPU401 instance is still alive. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-15ALSA: usb-audio - Fix build error by consitification of rate listTakashi Iwai1-2/+4
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-15ASoC: core: Fix obscure leak of runtime arrayMark Brown1-4/+4
We're currently not freeing card->rtd in cases where the card is unregistered before being instantiated - convert it to devm_kzalloc() to make sure that happens. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-03-15Merge tag 'asoc-3.4' of ↵Takashi Iwai15-283/+223
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc Linus decided to go for another week so here's a few more updates - a mixed bag here, a few minor diagnostic tweaks, some driver enhancements and the dmaengine conversion for ep93xx drivers which was tested a while ago and just waiting for a signoff.
2012-03-15ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link()Takashi Iwai1-5/+10
GFP_ATOMIC is used in snd_pcm_link() just because the kmalloc is called inside a lock. Since this function isn't too critical for speed and is rarely called in practice, better to allocate the chunk at first before spinlock and free it in error paths, so that GFP_KERNEL can be used. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-15ALSA: pcm: Constify the list in snd_pcm_hw_constraint_listMark Brown1-1/+2
Allows the constraint lists to be declared const by drivers which seems reasonable; there's plenty of other constification we could do if we were being complete but this was easy and quick. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-14ASoC: wm8996: Add 44.1kHz supportMark Brown1-9/+10
The WM8996 specification has been updated to specify 44.1kHz as a supported sample rate. Update the driver to accept this configuration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-14ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVETakashi Iwai1-8/+0
Now the mute-LED is controlled without powersave hack, and the ifdefs must be removed. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-13ASoC: mx27vis-aic32x4: Convert it to platform driverFabio Estevam1-19/+22
Convert mx27vis-aic32x4 to platform driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-13ALSA: hda - fix printing of high HDMI sample ratesAnssi Hannula1-2/+2
A previous commit af65cbf296 (ALSA: hdmi: fix printout of SAD sampling rates) fixed the sample rates shown in /proc/asound/cardX/eldY and kernel log to not be entirely wrong. However, a missing rate from the array added in the patch causes HDMI rates 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz to be shown as 96 kHz, 176.4 kHz, 192 kHz, and 384 kHz, respectively. Fix the reporting by adding the ALSA rate 64 kHz into the conversion array between 48 kHz and 88.2 kHz. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-13ALSA: ymfpci - Fix legacy registers on S3/S4 resumeTakashi Iwai1-0/+9
We need to resume two legacy registers to recover MIDI/FM functionality on S3/S4 resume, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-13ALSA: control - Fixe a trailing white space errorJeffrin Jose1-1/+1
Fixed a trailing white space error detected in sound/core/control.c by checkpatch.pl script. Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-13ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook()Takashi Iwai5-10/+23
Since it's not always safe to assume that the vmaster hook is purely the mute-LED control, add the flag indicating whether to expose the mute-LED enum control or not. Currently, conexant codec sets this off for non-HP laptops where EAPD may be used really as EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-13ALSA: hda - Add "Mute-LED Mode" enum controlTakashi Iwai5-22/+135
Create snd_hda_add_vmaster_hook() and snd_hda_sync_vmaster_hook() helper functions to handle the mute-LED in vmaster hook more commonly. In the former function, a new enum control "Mute-LED Mode" is added. This provides user to choose whether the mute-LED should be turned on/off explicitly or to follow the master-mute status. Reviewed-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ASoC: ep93xx-pcm: Use dmaengine PCM helper functionsLars-Peter Clausen2-126/+23
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12ASoC: dmaengine_pcm: Reset pointer position when starting a streamMika Westerberg1-0/+1
Otherwise a wrong position will be reported after restarting a stream and the first few samples might be skipped. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12ASoC: wm8994: Prevent ABBA deadlock with CODEC and accdet mutexesMark Brown1-35/+34
Currently we can the accdet mutex from within DAPM when updating the device state which means we take accdet then the CODEC mutex but we also do the locking the other way around when responding to the jackdet IRQ. Move all the jackdet use of the CODEC mutex out of the accdet lock to avoid this. Since all the DAPM interactions depend only on a single threaded IRQ this is still serialised. The locking improvements in 3.5 allow a better solution there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12ALSA: hda - Add EAPD control to Conexnat auto-parserTakashi Iwai1-4/+32
Added the vmaster hook for controlling EAPD dynamically to Conexant auto-parser. When the Master is muted, EAPDs are turned off as well. This will fix the missing mute-LED control on some machines in addition to the more power-saving in the auto-parser mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ALSA: hda - Rewrite the mute-LED control with vmaster hook for ALC269Takashi Iwai1-38/+44
We've had ugly static handling of the mute-LED with a powersave hook for ALC269 HP laptops just like done in patch_sigmatel.c. This is now rewritten with the new vmaster hook and a fixup code. For that, the new fixup action, ALC_FIXUP_ACT_BUILD, is introduced. It's called after build_controls is called. The reason of this new action is that vmaster hook must be added at this stage (not in init or probe). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ALSA: hda - Rewrite the mute-LED hook with vmaster hook in patch_sigmatel.cTakashi Iwai1-87/+49
The mute-LED is controlled in patch_sigmatel.c by (ab-)using the powersave hook. This can be now rewritten with the vmaster hook instead, which is much simpler and can work even without CONFIG_SND_HDA_POWER_SAVE kconfig. A drawback is that the mute-LED corresponds _only_ to the Master mixer switch instead of checking the whole DACs. But usually this shouldn't be a big problem as PA enables the mixer elements accordingly. Also, this patch changes the code to create vmaster always even on STAC9200 and STAC925x. The former "Master" on these chips are renamed as "PCM" now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ALSA: hda - Return the created kcontrol in __snd_hda_add_vmaster()Takashi Iwai3-5/+13
It'll be used for adding hooks in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ASoC: OMAP: Build config cleanup for McBSPPeter Ujfalusi2-8/+1
The McBSP driver stack has been moved, and rewritten resulting a single driver - selected by CONFIG_SND_OMAP_SOC_MCBSP. There is no longer need to have CONFIG_OMAP_MCBSP anymore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonoie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: fix snd_pcm_hw_rule_add argumentsGrazvydas Ignotas1-2/+2
We are setting SNDRV_PCM_HW_PARAM_BUFFER_SIZE based on SNDRV_PCM_HW_PARAM_CHANNELS, not vice versa. This bug didn't have much impact because the rules are evaluated multiple times by the core, and intended value got set eventually. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Correct clock muxing for CLKR/FSR signalsPeter Ujfalusi2-24/+19
Remove the no longer valid check for McBSP1 regarding to signal mux selection (on OMAP4 McBSP4 has 6 pin setup). Only clear the srgr2, pcr0 register configuration if the requested clock configuration will actually going to touch it. In this way we can avoid issues if the CLKR/FSR mux has been configured after the clock selection. We are going to check for the valid McBSP port in the omap_mcbsp_6pin_src_mux() function based on the validity of the mux_signal callback (which is only valid for ports having 6 pin setup). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Single function CLKR/FSR source mux configurationPeter Ujfalusi3-39/+32
Use single function for the CLKR/FSR mux configuration. OMAP2/3 has 6 pin configuration on McBSP1 instance, while on OMAP4 McBSP4 instance have the 6 pin configuration so the omap2_mcbsp1_mux_* is not correct name for all support OMAP versions Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC headerPeter Ujfalusi1-0/+12
Clock signal muxing, and functional clock related defines are only needed in ASoC drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonoie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap McBSP: Clear rx_irq at probe time for OMAP4Peter Ujfalusi1-1/+3
On OMAP4 we have one interrupt line per McBSP port. At probe time tx, and rx irq value will be -ENXIO, and only the tx irq will get corrected. In omap_mcbsp_request if the rx_irq is not 0 we proceed, and try to request the interrupt, which will fail on OMAP4 (rx_irq == -6). To avoid this error, clear the rx_irq at probe time on OMAP4. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: When closing the port select PRCM source for CLKS signalPeter Ujfalusi1-0/+10
If external source for the CLKS signal selection kept after the port is no longer in use the system might refuse to go suspend. There is also a chance that the external clock is not running when next time the McBSP port is started which can result errors when we try to access McBSP registers. Reset the CLKS source back to PRCM source unconditionally. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Configure wakeup in later phasePeter Ujfalusi1-4/+3
Configure the WAKEUPEN register at the same time we configure the rest of the McBSP registers. In case of OMAP3+, if the sysclock has been reconfigured we are going to disable McBSP for the duration of the clock change, which will reset the McBSP registers. The WAKEUPEN register need to be configured later, so the changes will be effective during runtime. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicrocom> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap: mcbsp: Remove redundant checks for the st_data pointerPeter Ujfalusi1-2/+2
The parent functions of omap_st_start/stop also checks the validity of the st_data pointer so we do not need to do it again inside of omap_st_start/stop Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap: mcbsp: Use uniform st_data pointer initializationPeter Ujfalusi1-16/+5
In this way we can save few lines, and have uniform way of initializing the st_data in all functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Simplify DMA configurationPeter Ujfalusi3-34/+10
Configure the DMA request line, port address, and stream name at probe time instead of every time we start a stream. These settings are static in the system. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Merge the omap_mcbsp_data into omap_mcbsp structurePeter Ujfalusi2-48/+38
Since the drivers has been merged, merge the two structures together. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Cleanup of module probe/remove codePeter Ujfalusi3-106/+85
Use devm_* where it is possible to save on cleanup path. Start merging the two mcbsp file content. Move pm_runtime_enable/disable calls to ASoC probe, remove from module probe/remove time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>