summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)AuthorFilesLines
2009-05-15ASoC: DaVinci EVM board support buildfixesDavid Brownell2-14/+56
This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S <chaithrika@ti.com> but not yet merged into the DaVinci tree.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-15ASoC: DaVinci I2S updatesDavid Brownell1-3/+23
This resyncs the DaVinci I2S code with the version in the DaVinci tree. The behavioral change uses updated clock interfaces which recently merged to mainline. Two other changes include adding a comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in order to support more boards than just the DM644x EVM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-15ASoC: davinci-pcm buildfixesDavid Brownell1-29/+42
This is a buildfix for the DaVinci PCM code, resyncing it with the version in the DaVinci tree. The notable change is using current EDMA interfaces, which recently merged to mainline. (The older interfaces never made it into mainline.) NOTE: open issue, the DMA should be to/from SRAM; see chip errata for more info. The artifacts are extremely easy to hear on DM355 hardware (not yet supported in mainline), but don't seem as audible on DM6446 hardwaare (which does have mainline support). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-11ASoC: soc-core: fix crash when removing not instantiated cardMike Rapoport1-0/+3
If the card was not instantiated in snd_soc_instantiate_card, calling soc-remove will crash because some of codec, cpu_dai and card .remove methods are called twice. Fix this by returning from soc_remove immediately. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-05ASoC: Fix errors in WM8990Jinyoung Park1-20/+20
The mis-typing exist in dapm controller definitions and dapm route definitions, so happen mis-matched error when snd_soc_dapm_add_routes(). Cc: stable@kernel.org Signed-off-by: Jinyoung Park <parkjy@mtekvision.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com
2009-05-04ASoC: Remove BROKEN from mpc5200 kconfigTakashi Iwai1-1/+1
The regression was fixed by commit 3e5b50165fd0be080044586f43fcdd460ed27610, so no need to mark this driver as BROKEN. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-04Merge branch 'fix/pcm-jiffies-check' into fix/asocTakashi Iwai18-29/+40
2009-04-28ASoC: TWL4030: Fix gain control for earpiece amplifierJoonyoung Shim1-1/+7
The gain control for earpiece amplifier uses 0dB ~ 12dB according to the TRM, but the present code is implemented to -6dB ~ 6dB. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-28ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some driversTakashi Iwai3-3/+5
Added SNDRV_PCM_INFO_BATCH flag to PCM info field of some drivers that really don't give the precise pointer value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-27ASoC: Set the MPC5200 i2s driver to BROKEN status.Jon Smirl1-1/+1
Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-27ASoC: Fix logic in WM8350 master clocking checkMark Brown1-1/+1
We need to check only if the WM8350 is master and only when starting the stream so if either is not true then we can skip the check. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-27Merge branch 'fix/asoc' into for-linusTakashi Iwai3-8/+12
* fix/asoc: ASoC: s3c-i2s-v2 needs to declare a license for modular builds ASoC: remove non-existing referece to CONFIG_SND_SOC_CODEC_WM8991 ASoC: Fix WM8580 volume update handling for large register changes ASoC: Fix offset of freqmode in WM8580 PLL configuration
2009-04-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-4/+23
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5460/1: Orion: reduce namespace pollution [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config [ARM] 5457/1: mach-imx gpio buildfix [ARM] 5456/1: add sys_preadv and sys_pwritev [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones [ARM] pxa/palm27x: General fix for Palm27x aSoC driver [ARM] pxa/mioa701: use GPIO95 as AC97 reset line [ARM] pxa: merge AC97 platform data structures [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h
2009-04-23ASoC: s3c-i2s-v2 needs to declare a license for modular buildsMark Brown1-1/+2
It relies on EXPORT_SYMBOL_GPL() symbols. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-23Merge commit 'takashi/fix/asoc' into for-2.6.30Mark Brown1-1/+0
2009-04-23ASoC: remove non-existing referece to CONFIG_SND_SOC_CODEC_WM8991Takashi Iwai1-1/+0
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22ASoC: Fix WM8580 volume update handling for large register changesMark Brown1-5/+9
The driver is out of sync with the core functions it is using. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-21ASoC: Fix offset of freqmode in WM8580 PLL configurationMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-04-21Merge branch 'fix/asoc' into for-linusTakashi Iwai7-17/+41
* fix/asoc: ASoC: Fix warning in wm9705 ASoC: OMAP: Update contact addresses ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR
2009-04-20Merge branch 'fix' of ↵Russell King1-4/+23
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-04-19[ARM] pxa/palm27x: General fix for Palm27x aSoC driverMarek Vasut1-4/+23
Firstly, this patch makes the palm27x asoc driver a little more sane. Also, since all affected devices use GPIO95 as AC97_nRESET, this patch sets that properly. Affected are PalmT5, TX and LifeDrive. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-19Merge branch 'fix/asoc' into for-linusTakashi Iwai6-19/+25
* fix/asoc: ASoC: OMAP: Fix FS polarity in OSK5912 machine driver ASoC: OMAP: Fix DSP_B format in OMAP McBSP DAI driver ASoC: Fix include build error in s3c2412-i2s.c ASoC: Fix s3c-i2s-v2.c snd_soc_dai changes ASoC: s3c-i2s-v2.c fix for s3c_i2sv2_iis_calc_rate ASoC: Fix jive_wm8750.c build problems ASoC: pxa-ssp: allow setting of dai format 0
2009-04-18ASoC: Fix warning in wm9705Russell King - ARM Linux1-1/+1
I notice that the fixes were merged, minus one: sound/soc/codecs/wm9705.c: At top level: sound/soc/codecs/wm9705.c:445: warning: initialization from incompatible pointer type so you might find this trivial patch useful. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-17ASoC: OMAP: Update contact addressesJarkko Nikula5-8/+12
My email address is going to expire soon so update it. Adding also Peter Ujfalusi <peter.ujfalusi@nokia.com> as a second contact to OMAP core drivers since I won't have anymore access to non-public OMAP documentation in the future and Peter is working with these drivers as well. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-17ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCRPhilipp Zabel1-8/+28
Those macros are just screwed as soon as CONFIG_PXA25x is enabled. This patch - changes ssp_set_scr to take an ssp_dev pointer instead of ssp_device - adds a corresponding ssp_get_scr function. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16ASoC: OMAP: Fix FS polarity in OSK5912 machine driverJarkko Nikula1-2/+2
Using inverted FS polarity in OSK5912 must be an error since TLV320AIC23 do not have support for inverted polarities. This is mostly due the hassle with the DSP formats in OMAP McBSP DAI and inversion on OMAP side probably just made this configuration working at some point. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16ASoC: OMAP: Fix DSP_B format in OMAP McBSP DAI driverJarkko Nikula1-2/+5
The DSP format wasn't still correct in OMAP McBSP DAI even after the commit bd25867a6cbe7a00ef7dbe8d9ddebc91b00b9b3f. Thanks to Peter Ujfalusi <peter.ujfalusi@nokia.com> for noticing and being part of the fix. Now the FS length definition is more clear by defining it with FWID(0). Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16ASoC: Fix include build error in s3c2412-i2s.cBen Dooks1-1/+1
Fix accidental change of <mach/regs-gpio.h> to <plat/regs-gpio.h> in s3c2412-i2s.c Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16ASoC: Fix s3c-i2s-v2.c snd_soc_dai changesBen Dooks1-4/+6
Fix the build error in s3c-i2s-v2.c caused by a change to the snd_soc_dai ops field. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16ASoC: s3c-i2s-v2.c fix for s3c_i2sv2_iis_calc_rateBen Dooks1-4/+4
The definition of s3c_i2sv2_iis_calc_rate was never renamed from s3c2412_iis_calc_rate, so rename this to allow the build to work. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16ASoC: Fix jive_wm8750.c build problemsBen Dooks1-6/+6
Fix build errors in sound/soc/s3c24xx/jive_wm8750.c from changes to ASoC. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16ASoC: pxa-ssp: allow setting of dai format 0Daniel Mack1-0/+1
pxa_ssp_set_dai_fmt() currently has an early exit if the desired format equals the current configuration. This is correct behaviour unless this function is called with a zero value parameter for the first time. Zero is a valid value for this function, but the early exit is bogus in this case. Hence, set priv->dai_fmt to -1 in the beginning so we can configure the port. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: pHilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-15[ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.hEric Miao1-2/+0
Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-14Merge branch 'for-2.6.30' of ↵Takashi Iwai2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2009-04-09ASoC: Disable S3C64xx support in KconfigMark Brown1-3/+3
Due to the process and communications issues with the 2.6.30 S3C platform merges none of the underlying arch/arm code for S3C64xx audio support made it into mainline, rendering the drivers useless. Disable them in Kconfig to avoid user confusion - users patching in the required support can always reenable this too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-09ASoC: magician: remove un-necessary #include of pxa-regs.h and hardware.hEric Miao1-2/+0
Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07Merge branch 'for-2.6.30' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 * 'for-2.6.30' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6: ASoC: TWL4030: Compillation error fix
2009-04-07Merge branch 'for-linus' of ↵Linus Torvalds12-66/+777
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (36 commits) ALSA: hda - Add VREF powerdown sequence for another board ALSA: oss - volume control for CSWITCH and CROUTE ALSA: hda - add missing comma in ad1884_slave_vols sound: usb-audio: allow period sizes less than 1 ms sound: usb-audio: save data packet interval in audioformat structure sound: usb-audio: remove check_hw_params_convention() sound: usb-audio: show sample format width in proc file ASoC: fsl_dma: Pass the proper device for dma mapping routines ASoC: Fix null dereference in ak4535_remove() ALSA: hda - enable SPDIF output for Intel DX58SO board ALSA: snd-atmel-abdac: increase periods_min to 6 instead of 4 ALSA: snd-atmel-abdac: replace bus_id with dev_name() ALSA: snd-atmel-ac97c: replace bus_id with dev_name() ALSA: snd-atmel-ac97c: cleanup registers when removing driver ALSA: snd-atmel-ac97c: do a proper reset of the external codec ALSA: snd-atmel-ac97c: enable interrupts to catch events for error reporting ALSA: snd-atmel-ac97c: set correct size for buffer hardware parameter ALSA: snd-atmel-ac97c: do not overwrite OCA and ICA when assigning channels ALSA: snd-atmel-ac97c: remove dead break statements after return in switch case ALSA: snd-atmel-ac97c: cleanup register definitions ...
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang5-8/+8
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07ASoC: TWL4030: Compillation error fixPeter Ujfalusi1-4/+6
Fix for compillation error introduced by the constrain patch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07Merge branch 'topic/asoc' into for-linusTakashi Iwai2-7/+8
2009-04-06ASoC: fsl_dma: Pass the proper device for dma mapping routinesAnton Vorontsov1-6/+6
The driver should pass a device that specifies internal DMA ops, but substream->pcm is just a logical device, and thus doesn't have arch- specific dma callbacks, therefore following bug appears: Freescale Synchronous Serial Interface (SSI) ASoC Driver ------------[ cut here ]------------ kernel BUG at arch/powerpc/include/asm/dma-mapping.h:237! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c02259c4] snd_malloc_dev_pages+0x58/0xac LR [c0225c74] snd_dma_alloc_pages+0xf8/0x108 Call Trace: [df02bde0] [df02be2c] 0xdf02be2c (unreliable) [df02bdf0] [c0225c74] snd_dma_alloc_pages+0xf8/0x108 [df02be10] [c023a100] fsl_dma_new+0x68/0x124 [df02be20] [c02342ac] soc_new_pcm+0x1bc/0x234 [df02bea0] [c02343dc] snd_soc_new_pcms+0xb8/0x148 [df02bed0] [c023824c] cs4270_probe+0x34/0x124 [df02bef0] [c0232fe8] snd_soc_instantiate_card+0x1a4/0x2f4 [df02bf20] [c0233164] snd_soc_instantiate_cards+0x2c/0x68 [df02bf30] [c0234704] snd_soc_register_platform+0x60/0x80 [df02bf50] [c03d5664] fsl_soc_platform_init+0x18/0x28 ... This patch fixes the issue by using card's device instead. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-06ASoC: Fix null dereference in ak4535_remove()Dan Carpenter1-1/+2
ak4535_remove() from sound/soc/codecs/ak4535.c calls i2c_unregister_device() with a possibly null pointer. This bug was found by smatch (http://repo.or.cz/w/smatch.git/). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-06Merge branch 'topic/asoc' into for-linusTakashi Iwai11-59/+769
2009-04-03ASoC: TWL4030: Add actual support for 96KHz playback supportPeter Ujfalusi2-0/+4
Adds the needed code to be able to use 96KHz playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-02ASoC: Implement suspend and resume operations for WM9705Mark Brown1-0/+37
Without this the WM9705 driver fails badly when resuming. Tested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-02ASoC: Set parent for AC97 devices we registerMark Brown1-1/+1
Ensure that any AC97 devices that bind to the CODEC are below the ASoC device in the device tree so the suspend and resume code can figure out what order to handle them in. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-02ASoC: Don't defer resume work for AC97 codecsMark Brown1-4/+14
AC97 devices may have other drivers hanging off them directly so need to have resumed when the resume function returns meaning that we can't defer the resume - complete it immediately for them. Non-AC97 devices should not have other drivers hanging directly off the ASoC devices. We only really need the deferral for non-AC97 devices - it's there since some I2C buses are very slow and non-AC97 codecs often have large numbers of registers to restore and require delays to bring the codec up cleanly leading to a substantial impact on overall resume time. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-02ASoC: OMAP: Set minimum buffer size constraint for McBSP2 in OMAP3Jarkko Nikula1-0/+11
McBSP2 in OMAP3 has 1 ksample (1k x 32 bit) internal FIFO. During initial playback startup, this FIFO is keeping the DMA request active until the FIFO is full. So now if ALSA buffer size is smaller, DMA is looping around it while filling up the HW FIFO, generating burst of interrupts as well and SW doesn't have any change to fill enough data. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-02ASoC: TWL4030: Add constrains for second streamPeter Ujfalusi1-0/+54
In case of duplex mode (capture and playback at the same time), the second stream has to have the same parameters (rate, sample size) as the already running stream. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>