summaryrefslogtreecommitdiff
path: root/sound/soc/tegra
AgeCommit message (Collapse)AuthorFilesLines
2012-08-03Merge tag 'sound-3.6' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bunch of small fixes for ASoC, mainly against regressions due to the defaulting regmap i/o, in addition to a HD-audio fixup." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: core: Fix check before defaulting to regmap ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC ASoC: wm8962: Allow VMID time to fully ramp ASoC: AC97 doesn't use regmap by default ASoC: sgtl5000: enable VAG_POWER for LINE_IN ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements ASoC: omap: Add missing modules aliases to get sound working on omap devices sound: tegra_alc5632: Adjust to of_get_named_gpio() change sound: tegra_wm8903: Adjust to of_get_named_gpio() change ASoC: mc13783: Provide codec->control_data ASoC: ux500: Include the correct header files ASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQs ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work ASoC: mxs-saif: fix clock prepare and enable unbalance issue ASoC: wm8994: Ensure there are enough BCLKs for four channels
2012-07-26sound: tegra_alc5632: Adjust to of_get_named_gpio() changeRoland Stigge1-1/+1
of_get_named_gpio() was changed to return -EPROBE_DEFER in case of gpios not probed yet. This patch adjusts tegra_alc5632 to this. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-26sound: tegra_wm8903: Adjust to of_get_named_gpio() changeRoland Stigge1-5/+5
of_get_named_gpio() was changed to return -EPROBE_DEFER in case of gpios not probed yet. This patch adjusts tegra_wm8903 to this. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24Merge tag 'sound-3.6' of ↵Linus Torvalds13-332/+335
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound update from Takashi Iwai: "This is a fairly quiet release in all sound area. Only a little bit of changes in the core side while most of changes are seen in the drivers. HD-audio: - A few new codec additions for Nvidia, Realtek and VIA - Intel Haswell audio support - Support for "phantom" jacks for consistent jack reporting - Major clean-ups in HDMI/DP driver codes - A workaround for inverted digital-mic pins with Realtek codecs - Removal of beep_mode=2 option ASoC: - Added the ability to add and remove DAPM paths dynamically, mostly for reparenting on clock changes - New machine drivers for Marvell Brownstone, ST-Ericsson Ux500 reference platform and ttc-dkp - New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP, Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF - New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500, TI Isabelle and Wolfson Microelectronics WM5102 and WM5110 - DAPM fixes for the recent locking changes - Fix for _PRE and _POST widgets (which have been broken for a few releases now) - A couple of minor driver updates Misc - Conversion to new dev_pm_ops in platform and PCI drivers - LTC support and some fixes in PCXHR driver - A few fixes and PM support for ISA OPti9xx and WSS cards - Some TLV code cleanup - Move driver-specific headers from include/sound to local dirs" * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (212 commits) ASoC: dapm: Fix _PRE and _POST events for DAPM performance improvements ALSA: hda - add dock support for Thinkpad X230 Tablet ALSA: hda - Turn on PIN_OUT from hdmi playback prepare. ASoC imx-audmux: add MX31_AUDMUX_PORT7_SSI_PINS_7 define ASoC: littlemill: Add userspace control of the WM1250 I/O ASoC: wm8994: Update micdet for irqdomain conversion ALSA: hda - make sure alc268 does not OOPS on codec parse ALSA: hda - Add support for Realtek ALC282 ALSA: hda - Fix index number conflicts of phantom jacks ALSA: opti9xx: Fix section mismatch by PM support ALSA: snd-opti9xx: Implement suspend/resume ALSA: hda - Add new GPU codec ID to snd-hda ALSA: hda - Fix driver type of Haswell controller to AZX_DRIVER_SCH ALSA: hda - add Haswell HDMI codec id ALSA: hda - Add DeviceID for Haswell HDA ALSA: wss_lib: Fix resume on Yamaha OPL3-SAx ALSA: wss_lib: fix suspend/resume ALSA: es1938: replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGE ALSA: tlv: add DECLARE_TLV_DB_RANGE() ALSA: tlv: add DECLARE_TLV_CONTAINER() ...
2012-07-06Merge branch 'for-3.6/common-clk' of ↵Arnd Bergmann5-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/clk From Stephen Warren <swarren@wwwdotorg.org>: This branch contains numerous changes required as a baseline in order to convert Tegra to the common clock framework. The intention was to also include patches to actually convert Tegra to the common clock framework. However, those patches appeared late in the kernel cycle and currently cause regressions on some boards, so were dropped for now. * 'for-3.6/common-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: Provide clock for only one PWM controller ARM: tegra: Fix PWM clock programming ARM: tegra: dma: rename driver name for clock to "tegra-apbdma" ARM: tegra: Remove second instance of uart clk crypto: add clk_prepare/clk_unprepare ASoC: tegra: add clk_prepare/clk_unprepare staging: nvec: add clk_prepare/clk_unprepare spi/tegra: add clk_prepare/clk_unprepare Input: tegra-kbc - add clk_prepare/clk_unprepare USB: ehci-tegra: add clk_prepare/clk_unprepare mmc: tegra: add clk_prepare/clk_unprepare i2c: tegra: Add clk_prepare/clk_unprepare ARM: tegra: add clk_prepare/clk_unprepare Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06Merge branch 'tegra/cleanup' into next/clkArnd Bergmann1-9/+1
Dependency for tegra/common-clk branch Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-03ASoC: tegra: use dmaengine based dma driverLaxman Dewangan3-1/+119
Use the dmaengine based Tegra APB DMA driver for data transfer between SPI fifo and memory in place of legacy Tegra APB DMA. Because generic soc-dmaengine-pcm uses the DMAs API based on dmaengine, using the exported APIs provided by this generic driver. The new driver is selected if legacy driver is not selected and new dma driver is enabled through config file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25Merge tag 'v3.5-rc4' into for-3.6Mark Brown2-0/+14
Linux 3.5-rc4 contains some bug fixes which overlap with new features.
2012-06-12ASoC: tegra: add clk_prepare/clk_unpreparePrashant Gaikwad5-16/+16
Use clk_prepare/clk_unprepare as required by the generic clk framework. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-12ASoC: tegra+wm8903: turn of mic detect when card is removedStephen Warren1-0/+13
If mic detect is left enabled and the WM8903 detects a status change, the WM8903 driver will make a callback against the free()d jack, which will cause a crash. This problem can be triggered by fully initializing an audio card, then removing and re-inserting the machine driver module. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: tegra: simplify Kconfig dependenciesStephen Warren1-9/+1
The Tegra ASoC machine drivers only depend on Tegra architecture support to compile, not specific board support. Remove Kconfig dependencies on any particular board. This is required since Kconfig options for boards are going away given the migration to device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: add MODULE_DEVICE_TABLE to tegra30_ahubStephen Warren1-0/+1
This allows the module to automatically load when instantiated from device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: use regmap more directlyStephen Warren6-112/+95
Stop open-coding the caching of the ctrl registers; instead, use regmap_update_bits() to update parts of the register from different places. The removal of the open-coded cache will allow controls to be created which touch registers, which will be necessary if any of these modules are converted to CODECs. Get rid of tegra*_read/write; just call regmap_read/write directly. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: use DAI's not card's dev for dev_errStephen Warren3-3/+3
This is the actual device of the I2S or SPDIF controller reporting the problem. If a future change converts these controllers to be CODECs, then there may be no pcm associated with the substream, so this change avoids a crash. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: remove usage of rtd->codecStephen Warren4-6/+8
rtd->codec_dai->codec can be used instead. This is a slight step along the way to not needing the rtd->codec field any more. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: statically define DAI link formatStephen Warren2-38/+6
Define the DAI format statically in the dai_link, rather than executing code to set it each time the hw params are set. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: add .stream_name to CPU DAIsStephen Warren3-0/+5
This is certainly required if the I2S and SPDIF controllers are converted to be CODECs, and is probably good practice irrespective. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: make snd_soc_dai_link more symmetricalStephen Warren4-12/+12
Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: tegra+wm8903: remove non-DT support for SeaboardStephen Warren1-46/+2
In kernel 3.6, Seaboard will only be supported when booting using device tree; the board files are being removed. Hence, remove the non-DT support for Seaboard and derivatives Kaen and Aebl from the audio driver. Harmony is the only remaining board supported by this driver when not using DT. This support is currently scheduled for removal in 3.7. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: tegra+wm8903: simplify gpio tests in widget callbacksStephen Warren1-2/+2
By the time any widget callbacks could be called, if the GPIO ID they will manipulate is valid, it must have already been requested, or the card would have failed to probe or initialize. So, testing for GPIO validity is equivalent to testing whether the GPIO was successfully requested at this point in the code. Making this change will allow later patches to remove the gpio_requested variable. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: tegra+alc5632: unconditionally free jack GPIOs in removeStephen Warren1-9/+2
The headphone jack GPIOs are added/initialized in the DAI link's init() method, and hence in theory may not always have been added before remove() is called in some unusual cases. In order to prevent calling snd_soc_jack_free_gpios() if snd_soc_jack_add_gpios() had not been, the code kept track of the initialization state to avoid the free call when necessary. However, it appears that snd_soc_jack_free_gpios() is robust in the face of being called without snd_soc_jack_add_gpios() first succeeding, so there is little point manually tracking this information. Hence, remove the tracking code. All other machine drivers already operate this way. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: tegra+alc5632: move all GPIO setup into probeStephen Warren1-4/+6
Now that deferred probe exists, we can parse device tree and request GPIOs from probe(), rather than deferring this to the DAI link's init(). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: tegra+wm8903: unconditionally free jack GPIOs in removeStephen Warren1-8/+2
The headphone jack GPIOs are added/initialized in the DAI link's init() method, and hence in theory may not always have been added before remove() is called in some unusual cases. In order to prevent calling snd_soc_jack_free_gpios() if snd_soc_jack_add_gpios() had not been, the code kept track of the initialization state to avoid the free call when necessary. However, it appears that snd_soc_jack_free_gpios() is robust in the face of being called without snd_soc_jack_add_gpios() first succeeding, so there is little point manually tracking this information. Hence, remove the tracking code. Almost all other machine drivers already operate this way. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: tegra+wm8903: Use devm_gpio_request_oneStephen Warren1-32/+10
By using this function, the driver no longer needs to explicitly free the GPIOs. Hence, we can also remove the flags we use to track whether we allocated these GPIOs. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: tegra+wm8903: move all GPIO setup into probeStephen Warren1-79/+83
Now that deferred probe exists, we can parse device tree and request GPIOs from probe(), rather than deferring this to the DAI link's init(). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19ASoC: tegra: Add machine driver for WM8753 codecStephen Warren3-0/+236
One such machine is Whistler. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-30ASoC: tegra: add device tree support for TrimSliceStephen Warren1-0/+34
This binding doesn't include the nvidia,model or nvidia,audio-routing properties the other Tegra audio DT bindings have, because this binding is targetted at a single machine, rather than for any machine using the tlv320aic23 codec. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: convert Tegra20 DAS driver to regmapStephen Warren2-65/+37
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: convert Tegra20 SPDIF driver to regmapStephen Warren2-84/+92
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: convert Tegra20 I2S driver to regmapStephen Warren2-76/+72
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: tegra: select REGMAP_MMIOStephen Warren1-0/+1
All Tegra ASoC drivers will be reworked to use MMIO regmaps. Select this in Kconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: tegra: add Kconfig and Makefile support for Tegra30Stephen Warren2-0/+22
This adds Kconfig options for the Tegra30 AHUB and I2S controller, and updates the Tegra+WM8903 machine driver Kconfig to select those. Includes a squashed bugfix from Sumit Bhattacharya <sumitb@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: tegra: add tegra30-i2s driverStephen Warren2-0/+778
This provides an ASoC DAI interface for Tegra 30's I2S controller. Includes a squashed bugfix from Sumit Bhattacharya <sumitb@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: tegra: add tegra30-ahub driverStephen Warren2-0/+1114
The AHUB (Audio Hub) is a mux/crossbar which links all audio-related devices except the HDA controller on Tegra30. The devices include the DMA FIFOs, DAM (Digital Audio Mixers), I2S controllers, and SPDIF controller. Audio data may be routed between these devices in various combinations as required by board design/application. Includes a squashed bugfix from Nikesh Oswal <noswal@nvidia.com> Includes squashed bugfixes from Sumit Bhattacharya <sumitb@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10ASoC: tegra: utils: Don't use of_have_populated_dt()Stephen Warren1-3/+5
Recent list discussions concluded that drivers should not be calling of_have_populated_dt(), and hence of_have_populated_dt() should not be exported. Use a different mechanism to detect DT vs. non-DT boot. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09ASoC: tegra: add runtime PM supportStephen Warren2-10/+94
To the Tegra I2S and SPDIF drivers Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: utils: add support for Tegra30 devicesStephen Warren2-7/+31
Tegra30 has some additional clocks that need to be manipulated, names some clocks differently, runs PLLs at different base rates, etc. The utility code needs to handle this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: set a sensible initial clock rateStephen Warren1-0/+6
Initialize the audio clock tree appropriately for some reasonable rate. This makes sure the PLLs etc. are actually programmed to something reasonable when the audio driver is loaded. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: use devm_ APIs in SPDIF driverStephen Warren1-23/+10
The devm_ APIs remove the need to manually clean up allocations, thus removing some code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: sort includes, remove mach/iomap.hStephen Warren4-11/+8
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: complete Tegra->Tegra20 renamingStephen Warren10-640/+640
Rename Tegra20-specific Kconfig variables, module filenames, all internal symbol names, clocks, and platform devices, to reflect the fact the DAS and I2S drivers are for a specific HW version. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: rename Tegra20-specific driver filesStephen Warren7-15/+15
Rename these files so they include a specific hardware version in their filenames. The contents is only touched minimally so that git's rename tracking operates correctly; renaming all symbols in the files results in a diff so large that the rename detection fails. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-05ASoC: tegra: make Tegra20 drivers depend on Tegra20 supportStephen Warren1-6/+6
Without this, the Tegra20 drivers can be built into a kernel that's built only for Tegra30. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-05ASoC: tegra: drop Kconfig description for SND_SOC_TEGRA_DASStephen Warren1-1/+1
The DAS, I2S, and SPDIF Kconfig options are intended to be selected by the Kconfig options for ASoC machine drivers. As such, they don't need to be user-visible themselves. Drop the description from the DAS variable to achieve this. I2S and SPDIF already don't have a description. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: tegra: remove open-coded clk reference countingStephen Warren4-18/+6
clk_enable/disable() already reference count the enable calls, so there's no need for the callers to do the same. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: tegra: sort Makefile into common and per-SoC filesStephen Warren1-3/+3
The DAS, I2S, and SPDIF drivers are Tegra20-specific. Group these together so that when Tegra30-specific equivalents are added later, the file ordering makes sense. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: tegra: introduce separate Kconfig variable for DAS driverStephen Warren2-1/+10
This is mainly for symmetry with a future Tegra30 driver, where the equivalent of the DAS (the AHUB) is useful separately from the I2S driver. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: tegra: fix some checkpatch warningsStephen Warren2-5/+5
ERROR: trailing whitespace ERROR: code indent should use tabs where possible WARNING: please, no spaces at the start of a line ERROR: "foo * bar" should be "foo *bar" Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: tegra: fix Kconfig SND_SOC_TEGRA_ALC5632 indentationStephen Warren1-7/+7
Indent with TABs to be consistent with the rest of the file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: tegra: remove unnecessary includesStephen Warren3-9/+0
These include aren't needed, and some of the files are about to be renamed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 04:22:59 +0000