summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/wm9081.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-01ASoC: wm9081: Fix enum ctl accesses in a wrong typeTakashi Iwai1-4/+4
"Speaker Mode "ctl in wm9081 codec driver is enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30Merge remote-tracking branches 'asoc/topic/tas2552', 'asoc/topic/tas5086', ↵Mark Brown1-4/+3
'asoc/topic/tegra', 'asoc/topic/tlv' and 'asoc/topic/topology' into asoc-next
2015-08-05ASoC: wm9081: Replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGELars-Peter Clausen1-4/+3
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD() that it automatically calculates the number of items in the TLV and is hence less prone to manual error. Generate using the following coccinelle script // <smpl> @@ declarer name DECLARE_TLV_DB_RANGE; identifier tlv; constant x; @@ -unsigned int tlv[] = { - TLV_DB_RANGE_HEAD(x), +DECLARE_TLV_DB_RANGE(tlv, ... -}; +); // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16Merge branches 'topic/owner' and 'topic/reg-default' of ↵Mark Brown1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-max9877
2015-07-15ASoC: drivers: Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-07ASoC: Constify reg_default tablesAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-01ASoC: wm9081: Replace direct snd_soc_codec dapm field accessLars-Peter Clausen1-1/+1
The dapm field of the snd_soc_codec struct is eventually going to be removed, in preparation for this replace all manual access to codec->dapm.bias_level with snd_soc_codec_get_bias_level(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27ASoC: Move bias level update to the coreLars-Peter Clausen1-2/+0
All drivers have the same line at the end of the set_bias_level callback to update the bias_level state. Move this update into snd_soc_dapm_force_bias_level() and remove them from the drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14ASoC: wm9081: Replace w->codec snd_soc_dapm_to_codec(w->dapm)Lars-Peter Clausen1-1/+1
The codec field of the snd_soc_widget struct is eventually going to be removed, use snd_soc_dapm_to_codec(w->dapm) instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm9081: Cleanup manual bias level transitionsLars-Peter Clausen1-7/+0
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-07-31ASoC: wm9081: Convert to params_width()Mark Brown1-5/+5
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-04-14ASoC: Add snd_soc_kcontrol_codec() helper functionLars-Peter Clausen1-2/+2
For CODEC controls snd_kcontrol_chip() currently returns a pointer to the CODEC that registered the control. With the upcoming consolidation of platform and CODEC controls this will change. Prepare for this by introducing the snd_soc_kcontrol_codec() helper function that will hide the implementation details of how the CODEC for a control can be obtained. This will allow us to change this easily in the future. The patch also updates all CODEC drivers to use the new helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-13Merge remote-tracking branch 'asoc/topic/io' into asoc-nextMark Brown1-10/+1
2014-03-11ASoC: codec: Simplify ASoC probe code.Xiubo Li1-10/+1
For some CODEC drivers like who act as the MFDs children are ignored by this patch. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23ASoC: wm9081: Use SOC_ENUM_SINGLE_DECL()Takashi Iwai1-14/+9
Just replace with the helper macro. No functional change at all. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27AsoC: wm9081: Use IS_ENABLED() macroFabio Estevam1-1/+1
Using the IS_ENABLED() macro can make the code shorter and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2012-12-10ASoC: codecs: remove __dev* attributesBill Pemberton1-4/+4
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02ASoC: wm9081: Use devm_regmap_init_i2c()Sachin Kamat1-16/+6
devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: codecs: Refresh copyrights for Wolfson driversMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08ASoC: wm9081: Hook DAC up via DAPM rather than streamMark Brown1-2/+3
More current API usage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-14ASoC: wm9081: Use idle_bias_offMark Brown1-25/+10
The main role of the WM9081 is as a class D speaker amplifier so there is no concern about pops. There are also very few registers and a fast power up time so we can happily mark the driver as idle_bias_off. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-14ASoC: wm9081: Move WM9081 IRQ platform data handling into I2C probeMark Brown1-11/+9
Better style and better supports idle_bias_off which we're going to implement. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ASoC: wm9081: Use module_i2c_driverMark Brown1-22/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-04ASoC: core: Add support for DAI and machine kcontrols.Liam Girdwood1-1/+1
Currently ASoC can only add kcontrols using codec and platform component device handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for SoC card machine drivers too. This allows the kcontrol to have a direct handle to the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily get it's private data. This change makes snd_soc_add_controls() static and wraps it in the folowing calls (card and dai are new) :- snd_soc_add_card_controls() snd_soc_add_codec_controls() snd_soc_add_dai_controls() snd_soc_add_platform_controls() This patch also does a lot of small mechanical changes in individual codec drivers to replace snd_soc_add_controls() with snd_soc_add_codec_controls(). It also updates the McBSP DAI driver to use snd_soc_add_dai_controls(). Finally, it updates the existing machine drivers that register controls to either :- 1) Use snd_soc_add_card_controls() where no direct codec control is required. 2) Use snd_soc_add_codec_controls() where there is direct codec control. In the case of 1) above we also update the machine drivers to get the correct component data pointers from the kcontrol (rather than getting the machine pointer via the codec pointer). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Remove cache default for volatile wm9081 reset registerMark Brown1-1/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02ASoC: Drop unused state parameter from CODEC suspend callbackLars-Peter Clausen1-1/+1
The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27ASoC: Convert wm9081 driver to use devm_kzalloc()Mark Brown1-3/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27ASoC: Remove unneeded platform_device.h inclusions from CODECsMark Brown1-1/+0
They've not been needed for a long time if they were ever required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen1-1/+1
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-09ASoC: wm9081: Use snd_soc_update_bits for read-modify-writeAxel Lin1-46/+35
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08Merge branch 'for-3.2' into for-3.3Mark Brown1-5/+5
2011-11-08ASoC: wm9081: Don't write WM9081_BIAS_ENA bit to WM9081_VMID_CONTROL registerAxel Lin1-4/+4
WM9081_BIAS_ENA is the bit[1] of WM9081_BIAS_CONTROL_1 register (05h). Current code incorrectly write it to WM9081_VMID_CONTROL(04h) register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: wm9081: Fix reading wrong register for setting VMID 2*240kAxel Lin1-1/+1
VMID Divider Enable and Select is controlled by BIT[2:1] of WM9081_VMID_CONTROL register (04h). Current code reads wrong register (WM9081_BIAS_CONTROL_1) for setting VMID 2*240k. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: Convert WM9081 to direct regmap API usageMark Brown1-98/+180
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04ASoC: Only enable thermal shutdown when required on WM9081Mark Brown1-0/+2
The WM9081 thermal shutdown is only effective when the speaker output is enabled so disable it when that is not in use for a small current saving. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-20ASoC: wm9081: Fix setting soft VMID ramp enable with VMID 2*240kAxel Lin1-1/+1
According to the datasheet: BIT 2:1 VMID_SEL[1:0] VMID Divider Enable and Select 00 = VMID disabled 01 = 2x40k Omh divider 10 = 2x240k Omh divider 11 = 2x5k Omh divider To set VMID 2*240k, we should OR reg with 0x04 instead of 0x40. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: WM9081 interrupt status register is volatileMark Brown1-0/+1
Not that we have interrupt handling in the driver at the minute. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-10-18ASoC: Convert WM9081 to table based control initMark Brown1-2/+2
At least for the core controls, the optionally selected controls are still added programatically. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-27ASoC: Remove unused "control_data" field of struct wm9081_privAxel Lin1-3/+0
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: Allow source specification for CODEC level sysclkMark Brown1-2/+2
Similarly to PLLs/FLLs some modern CODECs provide selectable system clock sources. When the clock is the clock for a DAI we do not usually need to identify which clock is being configured so can use clk_id for the source clock but with CODEC wide system clocks we will need to specify both the clock being configured and the source. Add a source argument to the CODEC driver set_sysclk() operation to reflect this. As this operation is not as widely used as the DAI set_sysclk() operation the change is not very invasive. We probably ought to go and make the same alternation for DAIs at some point. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-29ASoC: Change WM9081 speaker output enable to _OUT_DRVMark Brown1-1/+1
More for neatness than any actual performance improvement. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-09ASoC: Simplify WM9081 speaker startup by using widgets for spaker outputMark Brown1-26/+6
Now we have a register write minimisation code in DAPM we don't need to worry about the ordering of the enable and disable of the PGA and the output stage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-08ASoC: Convert WM9081 SYSCLK configuration to be device wideMark Brown1-3/+5
Also respace the CODEC ops a bit for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-08ASoC: Use data based init for WM9081 DAPMMark Brown1-6/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-01ASoC: Add platform data for WM9081 IRQ pin configurationMark Brown1-10/+19
The WM9081 IRQ output can be either active high or active low and can support either CMOS or open drain modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-01Merge branch 'for-2.6.38' into for-2.6.39Mark Brown1-0/+5
2011-03-01ASoC: Fix WM9081 platform data initialisationMark Brown1-0/+5
It went AWOL in the multi-component conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-25ASoC: Remove -codec suffix from WM9081 driverMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-13ASoC: Update users of readable_register()/volatile_register()Dimitris Papastamos1-1/+1
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 00:06:15 +0000