summaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)AuthorFilesLines
2015-04-08ALSA: hda - Fix headphone pin config for Lifebook T731Takashi Iwai1-0/+9
Some BIOS version of Fujitsu Lifebook T731 seems to set up the headphone pin (0x21) without the assoc number 0x0f while it's set only to the output on the docking port (0x1a). With the recent commit [03ad6a8c93b6: ALSA: hda - Fix "PCM" name being used on one DAC when there are two DACs], this resulted in the weird mixer element mapping where the headphone on the laptop is assigned as a shared volume with the speaker and the docking port is assigned as an individual headphone. This patch improves the situation by correcting the headphone pin config to the more appropriate value. Reported-and-tested-by: Taylor Smock <smocktaylor@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08ALSA: hda/realtek - Make more stable to get pin sense for ALC283Kailang Yang1-0/+2
Pin sense will active when power pin is wake up. Power pin will not wake up immediately during resume state. Add some delay to wait for power pin activated. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-04ALSA: hda/realtek - Support Dell headset mode for ALC256Kailang Yang1-0/+16
Dell new platform of ALC256 audio codec. Support headset mode for Dell ALC256 platform. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-26ALSA: hda - Add one more node in the EAPD supporting candidate listsound-4.0-rc6Hui Wang1-1/+1
We have a HP machine which use the codec node 0x17 connecting the internal speaker, and from the node capability, we saw the EAPD, if we don't set the EAPD on for this node, the internal speaker can't output any sound. Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1436745 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-26ALSA: hda_intel: apply the Seperate stream_tag for Sunrise PointLibin Yang1-1/+1
The total stream number of Sunrise Point's input and output stream exceeds 15, which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. This patch uses the new stream tag allocation method by add the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform. Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)Sebastian Wicki1-0/+1
This model uses the same dock port as the previous generation. Signed-off-by: Sebastian Wicki <gandro@gmx.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-16ALSA: hda - Treat stereo-to-mono mix properlyTakashi Iwai2-10/+49
The commit [ef403edb7558: ALSA: hda - Don't access stereo amps for mono channel widgets] fixed the handling of mono widgets in general, but it still misses an exceptional case: namely, a mono mixer widget taking a single stereo input. In this case, it has stereo volumes although it's a mono widget, and thus we have to take care of both left and right input channels, as stated in HD-audio spec ("7.1.3 Widget Interconnection Rules"). This patch covers this missing piece by adding proper checks of stereo amps in both the generic parser and the proc output codes. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-13ALSA: hda - Don't access stereo amps for mono channel widgetssound-4.0-rc4Takashi Iwai1-8/+22
The current HDA generic parser initializes / modifies the amp values always in stereo, but this seems causing the problem on ALC3229 codec that has a few mono channel widgets: namely, these mono widgets react to actions for both channels equally. In the driver code, we do care the mono channel and create a control only for the left channel (as defined in HD-audio spec) for such a node. When the control is updated, only the left channel value is changed. However, in the resume, the right channel value is also restored from the initial value we took as stereo, and this overwrites the left channel value. This ends up being the silent output as the right channel has been never touched and remains muted. This patch covers the places where unconditional stereo amp accesses are done and converts to the conditional accesses. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12ALSA: hda - Add workaround for MacBook Air 5,2 built-in micTakashi Iwai1-0/+1
MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the built-in mic records only the right channel. Apply the same workaround as MBP8,1 to spread the mono channel via a Cirrus codec vendor-specific COEF setup. Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12ALSA: hda - Set single_adc_amp flag for CS420x codecsTakashi Iwai1-0/+1
CS420x codecs seem to deal only the single amps of ADC nodes even though the nodes receive multiple inputs. This leads to the inconsistent amp value after S3/S4 resume, for example. The fix is just to set codec->single_adc_amp flag. Then the driver handles these ADC amps as if single connections. Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-11ALSA: hda - Fix built-in mic on Compaq Presario CQ60Takashi Iwai1-0/+11
Compaq Presario CQ60 laptop with CX20561 gives a wrong pin for the built-in mic NID 0x17 instead of NID 0x1d, and it results in the non-working mic. This patch just remaps the pin correctly via fixup. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=920604 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-09ALSA: hda - Fix regression of HD-audio controller fallback modesTakashi Iwai1-1/+1
The commit [63e51fd708f5: ALSA: hda - Don't take unresponsive D3 transition too serious] introduced a conditional fallback behavior to the HD-audio controller depending on the flag set. However, it introduced a silly bug, too, that the flag was evaluated in a reverse way. This resulted in a regression of HD-audio controller driver where it can't go to the fallback mode at communication errors. Unfortunately (or fortunately?) this didn't come up until recently because the affected code path is an error handling that happens only on an unstable hardware chip. Most of recent chips work stably, thus they didn't hit this problem. Now, we've got a regression report with a VIA chip, and this seems indeed requiring the fallback to the polling mode, and finally the bug was revealed. The fix is a oneliner to remove the wrong logical NOT in the check. (Lesson learned - be careful about double negation.) The bug should be backported to stable, but the patch won't be applicable to 3.13 or earlier because of the code splits. The stable fix patches for earlier kernels will be posted later manually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94021 Fixes: 63e51fd708f5 ('ALSA: hda - Don't take unresponsive D3 transition too serious') Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-06ALSA: hda - One more Dell macine needs DELL1_MIC_NO_PRESENCE quirkHui Wang1-0/+7
Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1428947 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25ALSA: hda - Disable runtime PM for Panther Point againsound-4.0-rc2Takashi Iwai1-1/+1
This is essentially a partial revert of the commit [b1920c21102a: 'ALSA: hda - Enable runtime PM on Panther Point']. There was a bug report showing the HD-audio bus hang during runtime PM on HP Spectre XT. Reported-by: Dang Sananikone <dang.sananikone@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-24ALSA: hda: controller code - do not export static functionsJaroslav Kysela1-5/+0
It is a bad idea to export static functions. GCC for some platforms shows errors like: error: __ksymtab_azx_get_response causes a section type conflict Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: hda - Add pin configs for ASUS mobo with IDT 92HD73XX codecTakashi Iwai1-1/+16
BIOS doesn't seem to set up pins for 5.1 and the SPDIF out, so we need to give explicitly here. Reported-and-tested-by: Misan Thropos <misanthropos@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-14ALSA: hda/tegra check correct return value from ioremap_resourceEliot Blennerhassett1-2/+2
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-13ALSA: hdspm - Constrain periods to 2 on older cardsAdrian Knoth1-0/+6
RME RayDAT and AIO use a fixed buffer size of 16384 samples. With period sizes of 32-4096, this translates to 4-512 periods. The older RME cards have a variable buffer size but require exactly two periods. This patch enforces nperiods=2 on those cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Cc: <stable@vger.kernel.org> # 2.6.39+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-13ALSA: hda - enable mute led quirk for one more hp machine.Hui Wang1-0/+1
Otherwise, the mute led can't work at all. Tested-by: Taihsiang Ho <taihsiang.ho@canonical.com> Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1410704 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11Merge tag 'sound-3.20-rc1' of ↵Linus Torvalds109-1209/+843
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "In this batch, you can find lots of cleanups through the whole subsystem, as our good New Year's resolution. Lots of LOCs and commits are about LINE6 driver that was promoted finally from staging tree, and as usual, there've been widely spread ASoC changes. Here some highlights: ALSA core changes - Embedding struct device into ALSA core structures - sequencer core cleanups / fixes - PCM msbits constraints cleanups / fixes - New SNDRV_PCM_TRIGGER_DRAIN command - PCM kerneldoc fixes, header cleanups - PCM code cleanups using more standard codes - Control notification ID fixes Driver cleanups - Cleanups of PCI PM callbacks - Timer helper usages cleanups - Simplification (e.g. argument reduction) of many driver codes HD-audio - Hotkey and LED support on HP laptops with Realtek codecs - Dock station support on HP laptops - Toshiba Satellite S50D fixup - Enhanced wallclock timestamp handling for HD-audio - Componentization to simplify the linkage between i915 and hd-audio drivers for Intel HDMI/DP USB-audio - Akai MPC Element support - Enhanced timestamp handling ASoC - Lots of refactoringin ASoC core, moving drivers to more data driven initialization and rationalizing a lot of DAPM usage - Much improved handling of CDCLK clocks on Samsung I2S controllers - Lots of driver specific cleanups and feature improvements - CODEC support for TI PCM514x and TLV320AIC3104 devices - Board support for Tegra systems with Realtek RT5677 - New driver for Maxim max98357a - More enhancements / fixes for Intel SST driver Others - Promotion of LINE6 driver from staging along with lots of rewrites and cleanups - DT support for old non-ASoC atmel driver - oxygen cleanups, XIO2001 init, Studio Evolution SE6x support - Emu8000 DRAM size detection fix on ISA(!!) AWE64 boards - A few more ak411x fixes for ice1724 boards" * tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (542 commits) ALSA: line6: toneport: Use explicit type for firmware version ALSA: line6: Use explicit type for serial number ALSA: line6: Return EIO if read/write not successful ALSA: line6: Return error if device not responding ALSA: line6: Add delay before reading status ASoC: Intel: Clean data after SST fw fetch ALSA: hda - Add docking station support for another HP machine ALSA: control: fix failure to return new numerical ID in 'replace' event data ALSA: usb: update trigger timestamp on first non-zero URB submitted ALSA: hda: read trigger_timestamp immediately after starting DMA ALSA: pcm: allow for trigger_tstamp snapshot in .trigger ALSA: pcm: don't override timestamp unconditionally ALSA: off by one bug in snd_riptide_joystick_probe() ASoC: rt5670: Set use_single_rw flag for regmap ASoC: rt286: Add rt288 codec support ASoC: max98357a: Fix build in !CONFIG_OF case ASoC: Intel: fix platform_no_drv_owner.cocci warnings ARM: dts: Switch Odroid X2/U2 to simple-audio-card ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update ALSA: control: fix failure to return numerical ID in 'add' event ...
2015-02-10ALSA: hda - Add docking station support for another HP machineTienFu Chen1-0/+1
BugLink: https://bugs.launchpad.net/bugs/1412800 Signed-off-by: TienFu Chen <tienfu.chen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09ALSA: hda: read trigger_timestamp immediately after starting DMAPierre-Louis Bossart1-0/+3
Make sure wallclock counter and trigger timestamp are read very close to each other for better alignment. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09ALSA: off by one bug in snd_riptide_joystick_probe()Dan Carpenter1-8/+19
The problem here is that we check: if (dev >= SNDRV_CARDS) Then we increment "dev". if (!joystick_port[dev++]) Then we use it as an offset into a array with SNDRV_CARDS elements. if (!request_region(joystick_port[dev], 8, "Riptide gameport")) { This has 3 effects: 1) If you use the module option to specify the joystick port then it has to be shifted one space over. 2) The wrong error message will be printed on failure if you have over 32 cards. 3) Static checkers will correctly complain that are off by one. Fixes: db1005ec6ff8 ('ALSA: riptide - Fix joystick resource handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-05ALSA: hda - Set up GPIO for Toshiba Satellite S50DTakashi Iwai1-0/+20
Toshiba Satellite S50D laptop with an IDT codec uses the GPIO4 (0x10) as the master EAPD. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=915858 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03Merge branch 'topic/snd-device' into for-nextTakashi Iwai2-3/+7
2015-02-02ALSA: pcm: Embed struct deviceTakashi Iwai1-1/+2
Like previous patches, at this time we embed the struct device into PCM object. However, this needs a bit more caution: struct snd_pcm doesn't own one device but two, for both playback and capture! Thus not struct snd_pcm but struct snd_pcm_str object contains the device. Along with this change, pcm->dev field is dropped for avoiding confusion. It was meant to point to a non-standard parent. But, since now we can touch each struct device directly, we can manipulate the parent field easily there, too. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02ALSA: hwdep: Embed struct deviceTakashi Iwai1-2/+5
Like the previous patch, this one embeds the device object into hwdep object. For a proper object lifecycle, it's freed in the release callback. This also allows us to create sysfs entries via passing to the groups field of the device without explicit function calls. Since each driver can see the device and touch its groups field directly, we don't need to delegate in hwdep core any longer. So, remove the groups field from snd_hwdep, and let the user (in this case only hda_hwdep.c) modify the device groups. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28Merge branch 'topic/ak411x-fix' into for-nextTakashi Iwai1-1/+3
2015-01-28ALSA: ak411x: Add PM helper functionsTakashi Iwai1-1/+3
Define snd_ak4114_suspend() and snd_ak4114_resume() functions to handle PM properly, stopping and restarting the work at PM. Currently only ice1712/juli.c deals with the PM and ak4114, so fix the calls there appropriately. The same PM functions are defined in ak4113.c, too, although they aren't currently called yet (ice1712/quartet.c may be enhanced to support PM later). Acked-by: Jaroslav Kysela <perex@perex.cz> Tested-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: au88x0: Remove superfluous ifdef __KERNEL__Takashi Iwai1-2/+0
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: Include linux/uaccess.h and linux/bitopts.h instead of asm/*Takashi Iwai1-1/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: Include linux/io.h instead of asm/io.hTakashi Iwai57-66/+57
Nowadays it's recommended. Replace all in a shot. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20ALSA: hda - Enable docking station for an HP machineTienFu Chen1-0/+13
On this machine we need to inform the driver where the docking station pins are, because it has not been set up by BIOS. Tested-by: TienFu Chen <tienfu.chen@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1412800 Signed-off-by: TienFu Chen <tienfu.chen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: hdspm: Use setup_timer() and mod_timer()Takashi Iwai1-9/+5
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: hdsp: Use setup_timer() and mod_timer()Takashi Iwai1-9/+5
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: korg1212: Use setup_timer() and mod_timer()Takashi Iwai1-7/+4
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: echoaudio: Use setup_timer() and mod_timer()Takashi Iwai1-3/+2
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: asihpi: Use setup_timer() and mod_timer()Takashi Iwai1-8/+5
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: add Studio Evolution SE6X supportClemens Ladisch3-0/+171
Add a driver for an embedded sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: oxygen: add XIO2001 initializationClemens Ladisch1-1/+10
Configure the XIO2001 bridge on PCI Express cards so that it does less needless prefetching. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: oxygen: add support for third analog inputClemens Ladisch4-7/+82
Make it possible for cards to have three stereo analog input pairs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: oxygen: do not create useless S/PDIF controlsClemens Ladisch1-0/+9
Cards without S/PDIF output do not need those controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15ALSA: hda - Fix typo in hda_controller.cMasanari Iida1-1/+1
This patch fix spelling typo in hda_controller.c. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15ALSA: hda - Select INPUT for Realtek HD-audio codecTakashi Iwai2-6/+1
The commit commit [33f4acd3b214: ALSA: hda - Enable mic mute hotkey and LEDs for an HP machine] introduced a quirk for a HP machine involving with the input event handling. Although the relevant code is protected via IS_ENABLED(CONFIG_INPUT), this doesn't suffice when the audio driver is built in while the input is module. As an easy workaround, this patch forcibly selects CONFIG_INPUT in Kconfig. This shouldn't be a practical problem since CONFIG_INPUT is almost mandatory for all systems. Also, this allows to remove the ugly ifdefs in the code. Fixes: 33f4acd3b214 ('ALSA: hda - Enable mic mute hotkey and LEDs for an HP machine') Acked-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+4
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13Merge tag 'topic/i915-hda-componentized-2015-01-12' of ↵Takashi Iwai4-126/+196
git://anongit.freedesktop.org/drm-intel into for-next
2015-01-12Merge branch 'topic/line6' into for-nextTakashi Iwai2-2/+4
2015-01-12ALSA: rme*: Use snd_pcm_format_tTakashi Iwai2-5/+3
Fix sparse warnings below by using snd_pcm_format_t properly: sound/pci/rme32.c:682:60: sparse: incorrect type in argument 2 (different base types) sound/pci/rme96.c:1006:69: sparse: incorrect type in argument 2 (different base types) ..... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12ALSA: hda: add component supportImre Deak3-45/+106
Register a component master to be used to interface with the i915 driver. This is meant to replace the current interface which is based on module symbol lookups. Note that currently we keep the existing behavior and pin the i915 module while the hda driver is loaded. Using the component interface allows us to remove this dependency once support for dynamically enabling / disabling the HDMI functionality is added to the driver. v2: - change roles between the hda and i915 components (Daniel) v3: - rename display_component to audio_component (Daniel) v4: - move removal of i915_powerwell.h from this patch to the next (Takashi) - request_module fails if module support isn't enabled, so ignore any error it returns and depend on the following NULL check of the component ops (Takashi) - change over to using dev_* instead of pr_* (Takashi) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-12ALSA: hda: pass intel_hda to all i915 interface functionsImre Deak3-26/+33
chip is already passed to most of the i915 interface functions. Unify the interface by passing intel_hda instead of chip and passing it to all functions. Passing intel_hda instead of chip makes more sense since this is an intel specific interface. Also in an upcoming patch we will use intel_hda in all of these functions so by passing intel_hda we can save on some pointer casts from chip to intel_hda. This will be needed by an upcoming patch adding component support. No functional change. v2-3: unchanged v4: - pass intel_hda instead of chip Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 10:20:57 +0000