summaryrefslogtreecommitdiff
path: root/scripts/kconfig
AgeCommit message (Collapse)AuthorFilesLines
2013-09-05kconfig: do not allow more than one symbol to have 'option modules'Yann E. MORIN1-0/+6
Previously, it was possible to have more than one symbol with the 'option modules' attached to them, although only the last one would in fact control tristates. Since this does not make much sense, only allow at most one symbol to control tristates. Note: it is still possible to have more than one symbol that control tristates, but indirectly: config MOD1 bool "mod1" select MODULES config MOD2 bool "mod2" select MODULES config MODULES bool option modules Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-09-05kconfig: regenerate bison parserYann E. MORIN1-264/+298
Regenerate bison parser after changes made in: 6902dcc: kconfig: do not special-case 'MODULES' symbol Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-09-05kconfig: do not special-case 'MODULES' symbolYann E. MORIN2-13/+3
Currently, the 'MODULES' symbol is hard-coded to be the default symbol that enables/disables tristates, if no other symbol was declared with 'option modules'. While this used to be needed for the Linux kernel, we now have an explicit 'option modules' attached to the 'MODULES' symbol (since cset 11097a036), so we no longer need to special-case it in the kconfig code. Furthermore, kconfig is extensively used out of the Linux kernel, and other projects may have another meaning for a symbol named 'MODULES'. This patch changes the way we enable/disable tristates: if a symbol was found with 'option modules' attached to it, then that symbol controls enabling tristates. Otherwise, tristates are disabled, even if a symbol named 'MODULES' exists. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-08-15kconfig: silence warning when parsing auto.conf when a symbol has changed typeYann E. MORIN1-3/+8
When a symbol changes type from tristate to bool, and was previously set to 'm', a subsequent silentoldconfig would warn about inconsistency, such as: include/config/auto.conf:3014:warning: symbol value 'm' invalid for HOTPLUG_PCI_PCIE Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal): git checkout 1fe0135 make mrproper make allmodconfig make silentoldconfig git checkout aa8032b make allmodconfig make silentoldconfig Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig, but then was set to 'y' by the second allmodconfig. Then the second silentoldconfig prints the warning. The warning in this case is a spurious warning, which happens at the time kconfig tries to detect symbols that have changed, to touch the empty header files in include/config used for dependency-tracking by make. Silence the warning when we read the old auto.conf file, since it is perfectly legit that a symbol changed type since the previous call. Thread in: http://marc.info/?l=linux-pci&m=137569198904000&w=2 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-15kconfig: switch to "long long" for sanityKees Cook1-9/+10
Instead of using "long" for kconfig "hex" and "range" values, which may change in size depending on the host architecture, use "long long". This will allow values greater than INT_MAX on 32-bit hosts when cross compiling. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-07-23Merge branch 'yem-kconfig-rc-fixes' of ↵Michal Marek3-33/+24
git://gitorious.org/linux-kconfig/linux-kconfig into kbuild/kconfig
2013-07-16kconfig: simplify symbol-search codeYann E. MORIN1-19/+11
There is no need for a double indirection in the temporary array that stores the internediate search results. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-07-16kconfig: don't allocate n+1 elements in temporary arrayYann E. MORIN1-1/+1
The temporary array that stores the search results is not NULL-terminated, so there is no reason to allocate n+1 elements. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-07-16kconfig: minor style fixes in symbol-search codeYann E. MORIN1-4/+3
Two minor style fixes: - no space before/after parenthesis in function definition - no {} for single-line if() And one grammar fix in a comment. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-07-16kconfig/[mn]conf: shorten title in search-boxYann E. MORIN2-4/+4
No need to repeat the 'CONFIG_' string in the title, once is explicit enough. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Jean Delvare <jdelvare@suse.de>
2013-07-16kconfig: avoid multiple calls to strlenYann E. MORIN1-5/+5
Calls to strlen are costly, so avoid calling strln as much as we can. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-07-10Merge branch 'kconfig' of ↵Linus Torvalds17-95/+242
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: - dependency solver fix for make defconfig - randconfig fixes, one of which had to be reverted again - more user-friendly sorting of search results - hex and range keywords support longs - fix for [mn]conf not to rely on particular behavior of the LINES and COLS variables - cleanup of magic constants in kconfig/lxdialog - [mn]conf formatting fixes - fix for scripts/config's help text in out-of-tree usage (under a different name) * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: allow "hex" and "range" to support longs Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG" kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG kconfig: loop as long as we changed some symbols in randconfig kconfig/[mn]conf: make it explicit in the search box that a regexp is possible kconfig: sort found symbols by relevance kconfig/conf: print the seed used to initialise the RNG for randconfig kconfig/conf: accept a base-16 seed for randconfig kconfig/conf: fix randconfig setting multiple symbols in a choice scripts/config: replace hard-coded script name by a dynamic value mconf/nconf: mark empty menus/menuconfigs different from non-empty ones nconf: use function calls instead of ncurses' variables LINES and COLS mconf: use function calls instead of ncurses' variables LINES and COLS kconfig/lxdialog: handle newline characters in print_autowrap() kconfig/lxdialog: Use new mininimum resize definitions in conf_choice() kconfig/lxdialog: Add definitions for mininimum (re)size values kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
2013-06-29kconfig: allow "hex" and "range" to support longsKees Cook1-5/+5
The parsing routines for Kconfig files use strtol(), but store and render values as int. Switch types and formating to long to support a wider range of values. For example, 0x80000000 wasn't representable. Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-26Revert "kconfig: fix randomising choice entries in presence of ↵Yann E. MORIN1-3/+3
KCONFIG_ALLCONFIG" This reverts commit 8357b48549e17b3e4e402c7f977b65708922e60f. It breaks more stuff than it fixes. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-24kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIGYann E. MORIN1-3/+3
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG is specified. For example, given those two files (Thomas' test-case): ---8<--- Config.test.in config OPTIONA bool "Option A" choice prompt "This is a choice" config CHOICE_OPTIONA bool "Choice Option A" config CHOICE_OPTIONB bool "Choice Option B" endchoice config OPTIONB bool "Option B" ---8<--- Config.test.in ---8<--- config.defaults CONFIG_OPTIONA=y ---8<--- config.defaults And running: ./scripts/kconfig/conf --randconfig Config.test.in does properly randomise the two choice symbols (and the two booleans). However, running: KCONFIG_ALLCONFIG=config.defaults \ ./scripts/kconfig/conf --randconfig Config.test.in does *not* reandomise the two choice entries, and only CHOICE_OPTIONA will ever be selected. (OPTIONA will always be set (expected), and OPTIONB will be be properly randomised (expected).) This patch defers setting that a choice has a value until a symbol for that choice is indeed set, so that choices are properly randomised when KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> --- Changes v3 -> v4 - fix previous issue where some choices would not be set, which would cause silentoldconfig to ask for them and was then breaking this workflow (as reported by Arnd and Sedat): KCONFIG_ALLCONFIG=foo.defconfig make randconfig make silentoldconfig </dev/nullo which I have tested (3h28min!) with: touch defconfig for(( i=0; i<10000; i++ )); do KCONFIG_ALLCONFIG=$(pwd)/defconfig make randconfig >/dev/null 2>&1 make silentoldconfig </dev/null >/dev/null 2>&1 || break done which did not break at all. - change done in v3 (below) is already fixed by a previous patch Changes v2 -> v3 - ensure only one symbol is set in a choice Changes v1 -> v2: - further postpone setting that a choice has a value until one is indeed set - do not print symbols that are part of an invisible choice
2013-06-24kconfig: loop as long as we changed some symbols in randconfigYann E. MORIN3-6/+17
Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-24kconfig/[mn]conf: make it explicit in the search box that a regexp is possibleYann E. MORIN2-2/+2
Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Jean Delvare <jdelvare@suse.de> Cc: Michal Marek <mmarek@suse.cz>
2013-06-24kconfig: sort found symbols by relevanceYann E. MORIN1-9/+69
When searching for symbols, return the symbols sorted by relevance. Sorting is done as thus: - first, symbols that match exactly - then, alphabetical sort Since the search can be a regexp, it is possible that more than one symbol matches exactly. In this case, we can't decide which to sort first, so we fallback to alphabeticall sort. Explain this (new!) sorting heuristic in the documentation. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Jean Delvare <jdelvare@suse.de> Cc: Michal Marek <mmarek@suse.cz> Cc: Roland Eggner <edvx1@systemanalysen.net> Cc: Wang YanQing <udknight@gmail.com> -- Changes v1->v2: - drop the previous, complex heuristic in favour of a simpler heuristic that is both easier to understand, *and* to maintain (Jean) - explain sorting heuristic in the doc (Jean)
2013-06-18kconfig/conf: print the seed used to initialise the RNG for randconfigYann E. MORIN1-0/+1
... so the user has a chance to reproduce a test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18kconfig/conf: accept a base-16 seed for randconfigYann E. MORIN1-1/+1
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18kconfig/conf: fix randconfig setting multiple symbols in a choiceYann E. MORIN1-0/+3
Currently, randconfig may set more than one symbol in a given choice. Given this config file: config A bool "A" if A choice bool "B/C/D" config B bool "B" config C bool "C" config D bool "D" endchoice endif # A Then randconfig generates such .config files (case where A is not set is not shown below for brevity), and where only the right-most .config is valid: CONFIG_A=y CONFIG_A=y CONFIG_A=y CONFIG_B=y CONFIG_B=y CONFIG_B=y CONFIG_C=y # CONFIG_C is not set # CONFIG_C is not set # CONFIG_D is not set CONFIG_D=y # CONFIG_D is not set That is, in a randomised choice, the first symbol is always selected, and at most one other symbol may be selected. This is due to symbol randomised in a choice not being properly flagged as having a value. Fix that by flagging those symbols adequately: have a user-defined value, and be not valid (to force recalculation of the symbol). Note: if the choice is not conditional, then the randomisation is properly done. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> [yann.morin.1998@free.fr: independently re-done the same patch as Matthieu, as pointed out by Sedat] Cc: Arnaud Lacombe <lacombar@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18mconf/nconf: mark empty menus/menuconfigs different from non-empty onesDirk Gouders4-13/+31
Submenus are sometimes empty and it would be nice if there is something that notifies us that we should not expect any content _before_ we enter a submenu. A new function menu_is_empty() was introduced and empty menus and menuconfigs are now marked by "----" as opposed to non-empty ones that are marked by "--->". This scheme was suggested by "Yann E. MORIN" <yann.morin.1998@free.fr>. Signed-off-by: Dirk Gouders <dirk@gouders.net> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18nconf: use function calls instead of ncurses' variables LINES and COLSDirk Gouders2-16/+25
According to the documentation [1], LINES and COLS are initialized by initscr(); it does not say anything about the behavior when windows are resized. Do not rely on the current implementation of ncurses that updates these variables on resize, but use the propper function calls or macros to get window dimensions. The use of the variables in main() was OK, but for the sake of consistency it was modified to use the macro getmaxyx(). [1] ncurses(3X) Signed-off-by: Dirk Gouders <dirk@gouders.net> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> [yann.morin.1998@free.fr: declare 'lines' and 'columns' on a single line] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-18mconf: use function calls instead of ncurses' variables LINES and COLSDirk Gouders6-14/+19
According to the documentation [1], LINES and COLS are initialized by initscr(); it does not say anything about the behavior when windows are resized. Do not rely on the current implementation of ncurses that updates these variables on resize, but use the propper function calls to get window dimensions. init_dialog() could make use of the variables, but for the sake of consistency we do not change it's current use of the macro getmaxyx(). [1] ncurses(3X) Signed-off-by: Dirk Gouders <dirk@gouders.net> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-18kconfig/lxdialog: handle newline characters in print_autowrap()Dirk Gouders2-16/+19
When exiting menuconfig with unsaved changes, a dialog like the following is shown: Do you wish to save your new configuration ? <ESC><ESC> to continue. The author of the dialog text specified a newline after the '?', and probably expected it to be processed, so let print_autowrap() handle newlines propperly. Also, reword that dialog's second phrase with a real sentence. Signed-off-by: Dirk Gouders <dirk@gouders.net> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> [yann.morin.1998@free.fr: very slightly tweak the commit message] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-18kconfig/lxdialog: Use new mininimum resize definitions in conf_choice()Sedat Dilek1-1/+3
This is a cleanup which uses the proper (new) definitions and does not change current behaviour. Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> --- Yann had some more ideas on improvements: "What would be nice is an improvement that scales the choice window to the number of entries in the choice. If there are a lot of choice entries, then the choice popup grows in height (but does not overflow the screen of course). So, instead of seeing only 6 entries, we'd see as much as possible in the current screen. Ditto for the width: the popup adapts to the longest prompt (but does not overflow the screen either, of course), so prompts are not truncated." NOTE: This patch requires [1]. [1] http://marc.info/?l=linux-kbuild&m=137128726917166&w=2
2013-06-16kconfig/lxdialog: Add definitions for mininimum (re)size valuesSedat Dilek7-9/+23
Commit c8dc68ad0fbd ("kconfig/lxdialog: support resize") added support for resizing, but forgot to collect all hardcoded values at one single place. Also add a definition for the check for a minimum screen/window size of 80x19. [ ChangeLog v3: * Rename MENU_{HEIGTH,WIDTH}_MIN -> MENUBOX_{HEIGTH,WIDTH}_MIN ChangeLog v2: * Rename WIN_{HEIGTH,WIDTH}_MIN -> WINDOW_{HEIGTH,WIDTH}_MIN * Mention the check for a minimum screen/window size in the changelog * Add a comment above the block of new definitions ] Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Wang YanQing <udknight@gmail.com> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-16kconfig: Fix defconfig when one choice menu selects options that another ↵Arve Hjønnevåg4-4/+25
choice menu depends on The defconfig and Kconfig combination below, which is based on 3.10-rc4 Kconfigs, resulted in several options getting set to "m" instead of "y". defconfig.choice: ---8<--- CONFIG_MODULES=y CONFIG_USB_ZERO=y ---8<--- Kconfig.choice: ---8<--- menuconfig MODULES bool "Enable loadable module support" config CONFIGFS_FS tristate "Userspace-driven configuration filesystem" config OCFS2_FS tristate "OCFS2 file system support" depends on CONFIGFS_FS select CRC32 config USB_LIBCOMPOSITE tristate select CONFIGFS_FS choice tristate "USB Gadget Drivers" default USB_ETH config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" select USB_LIBCOMPOSITE endchoice config CRC32 tristate "CRC32/CRC32c functions" default y choice prompt "CRC32 implementation" depends on CRC32 default CRC32_SLICEBY8 config CRC32_SLICEBY8 bool "Slice by 8 bytes" endchoice ---8<--- $ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice would result in: .config: ---8<--- CONFIG_MODULES=y CONFIG_CONFIGFS_FS=m CONFIG_USB_LIBCOMPOSITE=m CONFIG_USB_ZERO=m CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y ---8<--- when the expected result would be: .config: ---8<--- CONFIG_MODULES=y CONFIG_CONFIGFS_FS=y CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_ZERO=y CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y ---8<--- Signed-off-by: Arve Hjønnevåg <arve@android.com> [yann.morin.1998@free.fr: add the resulting .config to commit log, remove unneeded USB_GADGET from the defconfig] Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-05-30kconfig/menu.c: fix multiple references to expressions in menu_add_prop()Dirk Gouders1-1/+14
menu_add_prop() applies upper menus' visibilities to actual prompts by AND-ing the prompts visibilities with the upper menus ones. This creates a further reference to the menu's visibilities and when the expression reduction functions do their work, they may remove or modify expressions that have multiple references, thus causing unpredictable side-effects. The following example Kconfig constructs a case where this causes problems: a menu and a prompt which's visibilities depend on the same symbol. When invoking mconf with this Kconfig and pressing "Z" we see a problem caused by a free'd expression still referenced by the menu's visibility: ------------------------------------------------------------------------ mainmenu "Kconfig Testing Configuration" config VISIBLE def_bool n config Placeholder bool "Place holder" menu "Invisible" visible if VISIBLE config TEST_VAR bool "Test option" if VISIBLE endmenu ------------------------------------------------------------------------ This patch fixes this problem by creating copies of the menu's visibility expressions before AND-ing them with the prompt's one. Signed-off-by: Dirk Gouders <dirk@gouders.net> [yann.morin.1998@free.fr: move variable into its block-scope, keep lines <80 chars, typo] Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-05-30mconf: handle keys in empty dialogsDirk Gouders2-9/+11
When entering an empty dialog, using the movement keys resulted in unexpected characters beeing displayed, other keys like "z" and "h" did not work as expected. This patch handles the movement keys as well as other keys, especially "z", "h" and "/". Signed-off-by: Dirk Gouders <dirk@gouders.net> [yann.morin.1998@free.fr: keep lines <80 chars, so reorder test] Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-05-07Merge branch 'kconfig' of ↵Linus Torvalds9-12/+245
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: - use pkg-config to detect curses libraries - clean up the way curses headers are searched - Some randconfig fixes, of which one had to be reverted - KCONFIG_SEED for randconfig debugging - memuconfig memory leak plugged - menuconfig > breadcrumbs > navigation - xconfig compilation fix - Other minor fixes * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: fix lists definition for C++ Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG" kconfig: implement KCONFIG_PROBABILITY for randconfig kconfig: allow specifying the seed for randconfig kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG kconfig: do not override symbols already set kconfig: fix randconfig tristate detection kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.h menuconfig: Add "breadcrumbs" navigation aid menuconfig: Fix memory leak introduced by jump keys feature merge_config.sh: Avoid creating unnessary source softlinks kconfig: optionally use pkg-config to detect ncurses libs menuconfig: optionally use pkg-config to detect ncurses libs
2013-05-07menuconfig: fix NULL pointer dereference when searching a symbolLi Zefan1-6/+10
Searching for PPC_EFIKA results in a segmentation fault, and it's because get_symbol_prop() returns NULL. In this case CONFIG_PPC_EFIKA is defined in arch/powerpc/platforms/ 52xx/Kconfig, so it won't be parsed if ARCH!=PPC, but menuconfig knows this symbol when it parses sound/soc/fsl/Kconfig: config SND_MPC52xx_SOC_EFIKA tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" depends on PPC_EFIKA This bug was introduced by commit bcdedcc1afd6 ("menuconfig: print more info for symbol without prompts"). Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Li Zefan <lizefan@huawei.com> Tested-by: Libo Chen <libo.chen@huawei.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30menuconfig: print more info for symbol without promptsWengmeiling1-7/+20
When we search a config symbol, if it has no prompt the position of this symbol in the Kconfig file and it's dependencies are not printed. This can be inconvenient, especially when it's set to n and we want to find out why. the following is an example: before: Symbol: GENERIC_SMP_IDLE_THREAD [=y] Type : boolean Selected by: X86 [=y] after: Symbol: GENERIC_SMP_IDLE_THREAD [=y] Type : boolean Defined at arch/Kconfig:213 Selected by: X86 [=y] Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com> Signed-off-by: Libo Chen <libo.chen@huawei.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29localmodconfig: Process source kconfig files as they are foundSteven Rostedt1-10/+7
A bug was reported that caused localmodconfig to not keep all the dependencies of ATH9K. This was caused by the kconfig file: In drivers/net/wireless/ath/Kconfig: --- if ATH_CARDS config ATH_DEBUG bool "Atheros wireless debugging" ---help--- Say Y, if you want to debug atheros wireless drivers. Right now only ath9k makes use of this. source "drivers/net/wireless/ath/ath5k/Kconfig" source "drivers/net/wireless/ath/ath9k/Kconfig" source "drivers/net/wireless/ath/carl9170/Kconfig" source "drivers/net/wireless/ath/ath6kl/Kconfig" source "drivers/net/wireless/ath/ar5523/Kconfig" source "drivers/net/wireless/ath/wil6210/Kconfig" endif --- The current way kconfig works, it processes new source files after the first file is completed. It creates an array of new source config files and when the one file is finished, it continues with the next file. Unfortunately, this means that it loses the fact that the source file is within an "if" statement, and this means that each of these source file's configs will not have the proper dependencies set. As ATH9K requires ATH_CARDS set, the localmodconfig did not see that dependency, and did not enable ATH_CARDS. When the oldconfig was run, it forced ATH9K to be disabled. Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1304291022320.9234@oneiric Cc: stable@vger.kernel.org # 3.8+ Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Tested-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-29localmodconfig: Add debug prints for dependencies of module configsSteven Rostedt1-0/+9
When a config for a module is added to the list to save in the final config file, add a print to show what dependencies are used. This is useful to debug when a config is disabled by the make oldconfig after localmodconfig is finished. This print only appears if the environment variable LOCALMODCONFIG_DEBUG is defined. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-29kconfig: fix lists definition for C++Yann E. MORIN1-2/+2
The C++ compiler is more strict in that it refuses to assign a void* to a struct list_head*. Fix that by explicitly casting the poisonning constants. (Tested with all 5 frontends, now.) Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Benjamin Poirier <bpoirier@suse.de>
2013-04-26Revert "kconfig: fix randomising choice entries in presence of ↵Yann E. MORIN1-4/+3
KCONFIG_ALLCONFIG" This reverts commit 422c809f03f043d0950d8362214818e956a9daee. It causes more harm than it solves issues. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Greg KH <greg@kroah.com>
2013-04-25kconfig: implement KCONFIG_PROBABILITY for randconfigYann E. MORIN1-3/+54
Currently the odds to set each symbol is (rounded): booleans: y: 50% n: 50% tristates: y: 33% m: 33% n: 33% Introduce a KCONFIG_PROBABILITY environment variable to tweak the probabilities (in percentage), as such: KCONFIG_PROBABILITY y:n split y:m:n split ----------------------------------------------------------------- [1] unset or empty 50 : 50 33 : 33 : 34 [2] N N : 100-N N/2 : N/2 : 100-N N:M N+M : 100-(N+M) N : M : 100-(N+M) N:M:L N : 100-N M : L : 100-(M+L) [1] The current behaviour is kept as default, for backward compatibility [2] The solution initially implemented by Peter for Buildroot, see: http://git.buildroot.org/buildroot/commit/?id=3435c1afb5 Signed-off-by: Peter Korsgaard <jacmet@uclibc.org> [yann.morin.1998@free.fr: add to Documentation/] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25kconfig: allow specifying the seed for randconfigYann E. MORIN1-1/+11
For reproducibility, it can be useful to be able to specify the seed to use to seed the RNG. Add a new KCONFIG_SEED environment variable which can be set to the seed to use: $ make KCONFIG_SEED=42 randconfig $ sha1sum .config 70a128c8dcc61303069e1be352cce64114dfcbca .config $ make KCONFIG_SEED=42 randconfig $ sha1sum .config 70a128c8dcc61303069e1be352cce64114dfcbca .config It's very usefull for eg. debugging the kconfig parser. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIGYann E. MORIN1-3/+4
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG is specified. For example, given those two files (Thomas' test-case): ---8<--- Config.test.in config OPTIONA bool "Option A" choice prompt "This is a choice" config CHOICE_OPTIONA bool "Choice Option A" config CHOICE_OPTIONB bool "Choice Option B" endchoice config OPTIONB bool "Option B" ---8<--- Config.test.in ---8<--- config.defaults CONFIG_OPTIONA=y ---8<--- config.defaults And running: ./scripts/kconfig/conf --randconfig Config.test.in does properly randomise the two choice symbols (and the two booleans). However, running: KCONFIG_ALLCONFIG=config.defaults \ ./scripts/kconfig/conf --randconfig Config.test.in does *not* reandomise the two choice entries, and only CHOICE_OPTIONA will ever be selected. (OPTIONA will always be set (expected), and OPTIONB will be be properly randomised (expected).) This patch defers setting that a choice has a value until a symbol for that choice is indeed set, so that choices are properly randomised when KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set. Also, as a side-efect, this patch fixes the following case: ---8<--- choice config OPTION_A bool "Option A" config OPTION_B bool "Option B" config OPTION_C bool "Option C" endchoice ---8<--- which could previously generate such .config files: ---8<--- ---8<--- CONFIG_OPTION_A=y CONFIG_OPTION_A=y CONFIG_OPTION_B=y # CONFIG_OPTION_B is not set # CONFIG_OPTION_C is not set CONFIG_OPTION_C=y ---8<--- ---8<--- Ie., the first entry in a choice is always set, plus zero or one of the other options may be set. This patch ensures that only one option may be set for a choice. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Arnaud Lacombe <lacombar@gmail.com> --- Changes v2 -> v3 - ensure only one symbol is set in a choice Changes v1 -> v2: - further postpone setting that a choice has a value until one is indeed set - do not print symbols that are part of an invisible choice
2013-04-25kconfig: do not override symbols already setYann E. MORIN1-1/+1
For randconfig, if a list of required symbols is specified with KCONFIG_ALLCONFIG, such symbols do not "have a value" as per sym_has_value(), but have the "valid" flag set. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25kconfig: fix randconfig tristate detectionYann E. MORIN1-1/+1
Because the modules' symbole (CONFIG_MODULES) may not yet be set when we check a symbol's tristate capabilty, we'll always find that tristate symbols are booleans, even if we randomly decided that to enable modules: sym_get_type(sym) always return boolean for tristates when modules_sym has not been previously set to 'y' *and* its value calculated *and* its visibility calculated, both of which only occur after we randomly assign values to symbols. Fix that by looking at the raw type of symbols. Tristate set to 'm' will be promoted to 'y' when their values will be later calculated. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-16kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.hYann E. MORIN1-2/+2
The current code does this: if [ -f /usr/include/ncursesw/curses.h ]; then echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncursesw/curses.h>"' elif [ -f /usr/include/ncurses/ncurses.h ]; then echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"' elif [ -f /usr/include/ncurses/curses.h ]; then echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"' [...] This is merely inconsistent: - adding the full path to the directory in the -I directive, - especially since that path is already a sub-path of the system include path, - and then repeating the sub-path in the #include directive. Rationalise each include directive: - only use the filename in the #include directive, - keep the -I directives: they are always searched for before the system include path; this ensures the correct header is used. Using the -I directives and the filename-only in #include is more in line with how pkg-config behaves, eg.: $ pkg-config --cflags ncursesw -I/usr/include/ncursesw This paves the way for using pkg-config for CFLAGS, too, now we use it to find the libraries. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-16menuconfig: Add "breadcrumbs" navigation aidBenjamin Poirier4-3/+147
Displays a trail of the menu entries used to get to the current menu. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> [yann.morin.1998@free.fr: small, trivial code re-ordering] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-16menuconfig: Fix memory leak introduced by jump keys featureBenjamin Poirier2-0/+16
Fixes the memory leak of struct jump_key allocated in get_prompt_str() Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: stable@vger.kernel.org
2013-04-10merge_config.sh: Avoid creating unnessary source softlinksJohn Stultz1-1/+9
Viresh noticed when using merge_config.sh that a source softlink was being created even when he didn't specify the -O option. The problem arises due to the previous commit 409f117e2d6b which added the -O option. Basically if -O is not specified, we still pass '-O=.' to the make command, which then generates a source softlink to ./ This patch adds an extra check so if there is no -O specified to merge_config.sh, we don't pass one on to make. Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Reported-and-tested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-03-07kconfig: optionally use pkg-config to detect ncurses libsJustin Lecher1-1/+3
When building ncurses with --with-termlib several symbols get moved from libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one additionally needs to link with libtinfo.so. The ncurses pkg-config module will be used to detect the necessary libs for linking. If not available the old way of directly specifying libs will be used. Signed-off-by: Justin Lecher <jlec@gentoo.org> [yann.morin.1998@free.fr: fix typo: '-ncurses' --> '-lncurses'] Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-03-07menuconfig: optionally use pkg-config to detect ncurses libsJustin Lecher1-0/+2
When building ncurses with --with-termlib several symbols get moved from libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one additionally needs to link with libtinfo.so. The ncurses pkg-config module will be used to detect the necessary libs for linking. If not available the old heuristic for detection of the ncurses libs will be used. Signed-off-by: Justin Lecher <jlec@gentoo.org> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-02-25Merge branch 'kbuild/rc-fixes' into kbuild/kconfigMichal Marek6-15/+106
There is one kconfig fix in the rc-fixes branch that I forgot to submit for 3.8, so let's add it to the kconfig branch for 3.9-rc1.
2013-02-19kbuild: Fix missing '\n' for NEW symbols in yes "" | make oldconfig >conf.newBen Hutchings1-1/+6
According to Documentation/kbuild/kconfig.txt, the commands: yes "" | make oldconfig >conf.new grep "(NEW)" conf.new should list the new config symbols with their default values. However, currently there is no line break after each new symbol. When kconfig is interactive the user will type a new-line at this point, but when non-interactive kconfig must print it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reference: http://bugs.debian.org/636029 [regid23@nt1.in: Adjusted Ben's work to apply cleanly to this tree] Reported-and-tested-by: Regid Ichira <regid23@nt1.in> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 13:40:59 +0000