summaryrefslogtreecommitdiff
path: root/net/wireless/scan.c
AgeCommit message (Collapse)AuthorFilesLines
2013-02-15Merge remote-tracking branch 'mac80211/master' into HEADJohannes Berg1-1/+1
2013-02-15nl80211/cfg80211: add radar detection command/eventSimon Wunderlich1-10/+0
Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-13cfg80211: check vendor IE length to avoid overrunLuciano Coelho1-4/+8
cfg80211_find_vendor_ie() was checking only that the vendor IE would fit in the remaining IEs buffer. If a corrupt includes a vendor IE that is too small, we could potentially overrun the IEs buffer. Fix this by checking that the vendor IE fits in the reported IE length field and skip it otherwise. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Luciano Coelho <coelho@ti.com> [change BUILD_BUG_ON to != 1 (from >= 2)] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: move TSF into IEsJohannes Berg1-4/+3
While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: remove scan ies NULL checkJohannes Berg1-8/+3
There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: track hidden SSID networks properlyJohannes Berg1-52/+221
Currently, cfg80211 will copy beacon IEs from a previously received hidden SSID beacon to a probe response entry, if that entry is created after the beacon entry. However, if it is the other way around, or if the beacon is updated, such changes aren't propagated. Fix this by tracking the relation between the probe response and beacon BSS structs in this case. In case drivers have private data stored in a BSS struct and need access to such data from a beacon entry, cfg80211 now provides the hidden_beacon_bss pointer from the probe response entry to the beacon entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: pass wiphy to cfg80211_ref_bss/put_bssJohannes Berg1-2/+2
This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: wrap BSS krefJohannes Berg1-5/+15
Add inline wrappers for the BSS struct krefs to be able to extend them easily later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: remove a local variableJohannes Berg1-3/+2
This local variable is only used once, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: use lockdep to assert lock is heldJohannes Berg1-2/+4
Instead of annotating with a comment, add a lockdep annotation which also serves as documentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: move locking into cfg80211_bss_ageJohannes Berg1-1/+2
There's no reason for it to require external locking, move it into the function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: fix BSS IE allocation commentJohannes Berg1-4/+1
The comment about allocating the IEs together with the BSS struct is no longer true, remove it. Also fix a typo in the same area. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: remove unused cfg80211_get_meshJohannes Berg1-65/+0
As Thomas pointed out, cfg80211_get_mesh() is unused and can be removed. Cc: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: simplify mesh BSS comparisonJohannes Berg1-81/+39
Instead of first checking if a BSS is an MBSS and then doing the comparisons, inline it all into the BSS comparison function. This avoids doing the IE searches twice and is also a lot less code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: fix BSS list hidden SSID lookupJohannes Berg1-27/+53
When trying to find a hidden SSID, the lookup function is done wrong; the code is trying to combine the two lookups into one, and as a consequence doesn't always find the entry at all. To understand this, consider a case where multiple BSS entries with the same channel and BSSID exist but have different SSID length. Then comparing against the probe response SSID length is bound to cause problems since the hidden one might be either zeroed out or zero-length. To fix this we need to do two lookups for the two ways to hide SSIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: refactor hidden SSID findingJohannes Berg1-62/+20
Instead of duplicating the rbtree functions, pass an argument to the compare function. This removes the code duplication for the two searches. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31cfg80211: remove free_priv BSS APIJohannes Berg1-3/+0
Now that mac80211 no longer uses this API, remove it completely. If anyone needs it again, we can revert this patch of course, but mac80211 was the only user right now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24cfg80211: off by one in ieee80211_bss()Dan Carpenter1-1/+1
We do a: sprintf(buf, " Last beacon: %ums ago", elapsed_jiffies_msecs(bss->ts)); elapsed_jiffies_msecs() can return a 10 digit number so "buf" needs to be 31 characters long. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30cfg80211: fix BSS struct IE access racesJohannes Berg1-209/+200
When a BSS struct is updated, the IEs are currently overwritten or freed. This can lead to races if some other CPU is accessing the BSS struct and using the IEs concurrently. Fix this by always allocating the IEs in a new struct that holds the data and length and protecting access to this new struct with RCU. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30cfg80211: fix cmp_hidden_bssJohannes Berg1-4/+14
The cmp_bss() comparator function uses memcmp() to compare the SSID. This means that cmp_hidden_bss() needs to similarly return a number bigger than zero (use 1) instead of -1 when ie1 is bigger than ie2, which is the case if an ie2 byte is non-zero. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30cfg80211: fix whitespace in scan handlingJohannes Berg1-16/+13
Fix a number of indentation and similar issues. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30cfg80211: don't BUG_ON BSS struct issuesJohannes Berg1-2/+4
There's no need to stop the machine, just leak the BSS entry if there's an issue with its hold counter when freeing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23cfg80211: use DS or HT operation IEs to determine BSS channelJohannes Berg1-1/+44
Currently, mac80211 checks the DS params IE if present and uses it for the (primary) BSS channel, instead of the one that the frame was received on. This is particularly useful in the 2.4 GHz band since a frame is often received on one of the adjacent channels due to overlap. Move this code to cfg80211 so other drivers also do this. Additionally, on 5 GHz, in particular with some (possibly) upcoming changes in 802.11ai and duplicate transmissions when wider channels are used, something similar happens. So if present, also use the (primary) channel information contained in the HT operation IE. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add cfg80211 exported function tracingBeni Lev1-0/+13
Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add wrappers for registered_device_opsHila Gonen1-2/+3
This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add support for flushing old scan resultsSam Leffler1-20/+46
Add an NL80211_SCAN_FLAG_FLUSH flag that causes old bss cache entries to be flushed on scan completion. This is useful for collecting guaranteed fresh scan/survey result (e.g. on resume). For normal scan, flushing only happens on successful completion of a scan; i.e. it does not happen if the scan is aborted. For scheduled scan, previous scan results are flushed everytime when we get new scan results. This feature is enabled by default. Drivers can disable it by unsetting the NL80211_FEATURE_SCAN_FLUSH flag. Signed-off-by: Sam Leffler <sleffler@chromium.org> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [invert polarity of feature flag to account for old kernels] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: code rearrangement to avoid forward declarationsAmitkumar Karwar1-27/+27
bss_release() and __cfg80211_unlink_bss() function definitions are moved at the begining of the file. They are used in next patch in this series. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05cfg80211: fix indentationHila Gonen1-1/+1
checkpatch pointed out an issue, fix it. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12nl80211: move scan API to wdevJohannes Berg1-11/+13
The new P2P Device will have to be able to scan for P2P search, so move scanning to use struct wireless_dev instead of struct net_device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-05-14Merge branch 'master' of ↵David S. Miller1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-05-09wireless: Convert compare_ether_addr to ether_addr_equalJoe Perches1-1/+1
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. I removed a conversion from scan.c/cmp_bss_core that appears to be a sorting function. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08cfg80211: fix BSS comparisonEmmanuel Grumbach1-1/+5
Since the BSS table is organized in a RB tree, the BSSs need to be comparable. This means that we must define a < and > operator to the BSS object. compare_ethr_addr isn't enough since it returns only a binary value. Since Felix's cfg80211: use compare_ether_addr on MAC addresses instead of memcmp Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> The BSS table is corrupted: rb_find_bss can't find the bss. As a result BSSes are duplicated in the BSS table, and we get stuck while probing an AP before associating (in STA mode). Change-Id: I85928756f4328028230832c1565ece7f412f3843 CC: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16cfg80211: increse bss expire timeRajkumar Manoharan1-1/+1
The background scan completion takes more time when the station is having heavy uplink traffic. The scan state machine decides to fall back to home channel on every off-channel visit when there are pending frames in tx queue. bgscan completion took ~30sec on dual band US regulatory card. scan period = (20 active channels * probe timeout) + (12 passive channels * passive probe timeout) + (32 * timeout on home channel) + (32 * flush timeout) Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09cfg80211: use compare_ether_addr on MAC addresses instead of memcmpFelix Fietkau1-1/+1
Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13cfg80211: clarify timestamp in cfg80211_inform_bssJohannes Berg1-4/+3
This is intended to be the timestamp sent by the peer in the beacon/probe response, not any form of host timestamp. Clarify the documentation and variable names. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211: export cfg80211_ref_bssJohannes Berg1-0/+12
This is needed by mac80211 to keep a reference to a BSS alive for the auth process. Remove the old version of cfg80211_ref_bss() since it's not actually used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11cfg80211: merge in beacon ies of hidden bss.Dmitry Tarnyagin1-3/+114
The problem with PSM when a hidden SSID was used was originally reported by Juuso Oikarinen. - When generally scanning, the AP is getting a bss entry with a zero SSID. - When associating, a probe-req is sent to the AP with the SSID, and as a result a probe-response is received with the hidden SSID in place. As a consequence, a second bss entry is created for the AP, now with the real SSID. - After association, mac80211 executes ieee80211_recalc_ps(), but does not switch to powersave because the beacon-ies are missing. As result, the STA does not ever enter PSM. The patch merges in beacon ies of hidden bss from beacon to the probe response, creating a consistent set of ies in place. Patch is depended on "cfg80211: fix cmp_ies" made by Johannes. Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07cfg80211: fix cmp_iesJohannes Berg1-5/+8
When comparing two items by IE, the sort order wasn't stable, which could lead to issues in the rbtree. Make it stable by making a missing IE sort before a present IE. Also sort by length first if it differs and then by contents. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19cfg80211: add cfg80211_find_vendor_ie() functionEliad Peller1-0/+27
Add function to find vendor-specific ie (along with vendor-specific ie struct definition and P2P OUI values) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08cfg80211: split wext compatibility to separate headerJohannes Berg1-0/+1
A lot of drivers erroneously use wext constants and don't notice since cfg80211.h includes them. Make this more split up so drivers needing wext compatibility from cfg80211 need to explicitly include that from cfg80211-wext.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20cfg80211: fix scan crash on single-band cardsJohannes Berg1-1/+2
commit 58389c69150e6032504dfcd3edca6b1975c8b5bc Author: Johannes Berg <johannes.berg@intel.com> Date: Mon Jul 18 18:08:35 2011 +0200 cfg80211: allow userspace to control supported rates in scan made single-band cards crash since it would always access all wiphy->bands[]. Fix this and reject any attempts in the new helper ieee80211_get_ratemask() to do the same, rejecting rates configuration for unsupported bands. Reported-by: Pavel Roskin <proski@gnu.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19cfg80211: allow userspace to control supported rates in scanJohannes Berg1-0/+3
Some P2P scans are not allowed to advertise 11b rates, but that is a rather special case so instead of having that, allow userspace to request the rate sets (per band) that are advertised in scan probe request frames. Since it's needed in two places now, factor out some common code parsing a rate array. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11Merge branch 'master' of ↵John W. Linville1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath5k/sysfs.c net/bluetooth/l2cap_core.c net/mac80211/wpa.c
2011-07-08cfg80211: return -ENOENT when stopping sched_scan while not runningLuciano Coelho1-1/+1
If we try to stop a scheduled scan while it is not running, we should return -ENOENT instead of simply ignoring the command and returning success. This is more consistent with other parts of the code. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05net, wireless: Don't return uninitialized in __cfg80211_stop_sched_scan()Jesper Juhl1-3/+2
If the 'driver_initiated' function argument to __cfg80211_stop_sched_scan() is not 0 then we'll return an uninitialized 'err' from the function. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05cfg80211: fix deadlock with rfkill/sched_scan by adding new mutexLuciano Coelho1-5/+5
There was a deadlock when rfkill-blocking a wireless interface, because we were locking the rdev mutex on NETDEV_GOING_DOWN to stop sched_scans that were eventually running. The rfkill block code was already holding a mutex under rdev: kernel: ======================================================= kernel: [ INFO: possible circular locking dependency detected ] kernel: 3.0.0-rc1-00049-g1fa7b6a #57 kernel: ------------------------------------------------------- kernel: kworker/0:1/4525 is trying to acquire lock: kernel: (&rdev->mtx){+.+.+.}, at: [<ffffffff8164c831>] cfg80211_netdev_notifier_call+0x131/0x5b0 kernel: kernel: but task is already holding lock: kernel: (&rdev->devlist_mtx){+.+.+.}, at: [<ffffffff8164dcef>] cfg80211_rfkill_set_block+0x4f/0xa0 kernel: kernel: which lock already depends on the new lock. To fix this, add a new mutex specifically for sched_scan, to protect the sched_scan_req element in the rdev struct, instead of using the global rdev mutex. Reported-by: Duane Griffin <duaneg@dghda.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01cfg80211: don't drop p2p probe responsesEliad Peller1-19/+24
Commit 0a35d36 ("cfg80211: Use capability info to detect mesh beacons") assumed that probe response with both ESS and IBSS bits cleared means that the frame was sent by a mesh sta. However, these capabilities are also being used in the p2p_find phase, and the mesh-validation broke it. Rename the WLAN_CAPABILITY_IS_MBSS macro, and verify that mesh ies exist before assuming this frame was sent by a mesh sta. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12cfg80211/mac80211: avoid bounce back mac->cfg->mac on sched_scan_stoppedLuciano Coelho1-14/+7
When sched_scan_stopped was called by the driver, mac80211 calls cfg80211, which in turn was calling mac80211 back with a flag "driver_initiated". This flag was used so that mac80211 would do the necessary cleanup but would not call the driver. This was enough to prevent the bounce back between the driver and mac80211, but not between mac80211 and cfg80211. To fix this, we now do the cleanup in mac80211 before calling cfg80211. To help with locking issues, the workqueue was moved from cfg80211 to mac80211. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211/nl80211: add support for scheduled scansLuciano Coelho1-0/+70
Implement new functionality for scheduled scan offload. With this feature we can scan automatically at certain intervals. The idea is that the hardware can perform scan automatically and filter on desired results without waking up the host unnecessarily. Add NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN commands to the nl80211 interface. When results are available they are reported by NL80211_CMD_SCHED_SCAN_RESULTS events. The userspace is informed when the scheduled scan has stopped with a NL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by the driver or by a call to NL80211_CMD_STOP_SCHED_SCAN. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211: Use capability info to detect mesh beacons.Javier Cardona1-7/+7
Mesh beacons no longer use all-zeroes BSSID. Beacon frames for MBSS, infrastructure BSS, or IBSS are differentiated by the Capability Information field in the Beacon frame. A mesh STA sets the ESS and IBSS subfields to 0 in transmitted Beacon or Probe Response management frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 17:41:43 +0000