| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While we should definitely return socket errors to the task that is
currently trying to send data, there is no need to propagate the same error
to all the other tasks on xprt->pending. Doing so actually slows down
recovery, since it causes more than one tasks to attempt socket recovery.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If we get an ECONNREFUSED error, we currently go to sleep on the
'xprt->sending' wait queue. The problem is that no timeout is set there,
and there is nothing else that will wake the task up later.
We should deal with ECONNREFUSED in call_status, given that is where we
also deal with -EHOSTDOWN, and friends.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Provide an api to attempt to load any necessary kernel RPC
client transport module automatically. By convention, the
desired module name is "xprt"+"transport name". For example,
when NFS mounting with "-o proto=rdma", attempt to load the
"xprtrdma" module.
Signed-off-by: Tom Talpey <tmtalpey@gmail.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If the transport isn't bound, then we should just return ENOTCONN, letting
call_connect_status() and/or call_status() deal with retrying. Currently,
we appear to abort all pending tasks with an EIO error.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Basically, try_module_get here are pretty useless. Any other module using
this API will pin sunrpc in memory due using exported symbols.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The RPC client uses the rq_xtime field in each RPC request to determine the
round-trip time of the request. Currently, the rq_xtime field is
initialized by each transport just before it starts enqueing a request to
be sent. However, transports do not handle initializing this value
consistently; sometimes they don't initialize it at all.
To make the measurement of request round-trip time consistent for all
RPC client transport capabilities, pull rq_xtime initialization into the
RPC client's generic transport logic. Now all transports will get a
standardized RTT measure automatically, from:
xprt_transmit()
to
xprt_complete_rqst()
This makes round-trip time calculation more accurate for the TCP transport.
The socket ->sendmsg() method can return "-EAGAIN" if the socket's output
buffer is full, so the TCP transport's ->send_request() method may call
the ->sendmsg() method repeatedly until it gets all of the request's bytes
queued in the socket's buffer.
Currently, the TCP transport sets the rq_xtime field every time through
that loop so the final value is the timestamp just before the *last* call
to the underlying socket's ->sendmsg() method. After this patch, the
rq_xtime field contains a timestamp that reflects the time just before the
*first* call to ->sendmsg().
This is consequential under heavy workloads because large requests often
take multiple ->sendmsg() calls to get all the bytes of a request queued.
The TCP transport causes the request to sleep until the remote end of the
socket has received enough bytes to clear space in the socket's local
output buffer. This delay can be quite significant.
The method introduced by this patch is a more accurate measure of RTT
for stream transports, since the server can cause enough back pressure
to delay (ie increase the latency of) requests from the client.
Additionally, this patch corrects the behavior of the RDMA transport, which
entirely neglected to initialize the rq_xtime field. RPC performance
metrics for RDMA transports now display correct RPC request round trip
times.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Tom Talpey <thomas.talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Recent changes to the RPC client's transport connect logic make connect
status values ECONNREFUSED and ECONNRESET impossible.
Clean up xprt_connect_status() to account for these changes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
iwlwifi: Allow building iwl3945 without iwl4965.
wireless: Fix compile error with wifi & leds
tcp: Fix slab corruption with ipv6 and tcp6fuzz
ipv4/ipv6 compat: Fix SSM applications on 64bit kernels.
[IPSEC]: Use digest_null directly for auth
sunrpc: fix missing kernel-doc
can: Fix copy_from_user() results interpretation
Revert "ipv6: Fix typo in net/ipv6/Kconfig"
tipc: endianness annotations
ipv6: result of csum_fold() is already 16bit, no need to cast
[XFRM] AUDIT: Fix flowlabel text format ambibuity.
|
|
Fix missing sunrpc kernel-doc:
Warning(linux-2.6.25-git7//net/sunrpc/xprt.c:451): No description found for parameter 'action'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NFSv4 requires us to ensure that we break the TCP connection before we're
allowed to retransmit a request. However in the case where we're
retransmitting several requests that have been sent on the same
connection, we need to ensure that we don't interfere with the attempt to
reconnect and/or break the connection again once it has been established.
We therefore introduce a 'connection' cookie that is bumped every time a
connection is broken. This allows requests to track if they need to force a
disconnection.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We want to ensure that req->rq_private_buf.len is updated before
req->rq_received, so that call_decode() doesn't use an old value for
req->rq_rcv_buf.len.
In 'call_decode()' itself, instead of using task->tk_status (which is set
using req->rq_received) must use the actual value of
req->rq_private_buf.len when deciding whether or not the received RPC reply
is too short.
Finally ensure that we set req->rq_rcv_buf.len to zero when retrying a
request. A typo meant that we were resetting req->rq_private_buf.len in
call_decode(), and then clobbering that value with the old rq_rcv_buf.len
again in xprt_transmit().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The rest of the networking layer uses SOCK_ASYNC_NOSPACE to signal whether
or not we have someone waiting for buffer memory. Convert the SUNRPC layer
to use the same idiom.
Remove the unlikely()s in xs_udp_write_space and xs_tcp_write_space. In
fact, the most common case will be that there is nobody waiting for buffer
space.
SOCK_NOSPACE is there to tell the TCP layer whether or not the cwnd was
limited by the application window. Ensure that we follow the same idiom as
the rest of the networking layer here too.
Finally, ensure that we clear SOCK_ASYNC_NOSPACE once we wake up, so that
write_space() doesn't keep waking things up on xprt->pending.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
An audit of the current RPC timeout functions shows that they don't really
ever need to run in the softirq context. As long as the softirq is
able to signal that the wakeup is due to a timeout (which it can do by
setting task->tk_status to -ETIMEDOUT) then the callback functions can just
run as standard task->tk_callback functions (in the rpciod/process
context).
The only possible border-line case would be xprt_timer() for the case of
UDP, when the callback is used to reduce the size of the transport
congestion window. In testing, however, the effect of moving that update
to a callback would appear to be minor.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
All RPC timeout callback functions are expected to wake the task up. We can
enforce this by moving the wakeup back into rpc_run_timer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Use updated file list for docbook files and
fix kernel-doc warnings in sunrpc:
Warning(linux-2.6.24-git12//net/sunrpc/rpc_pipe.c:689): No description found for parameter 'rpc_client'
Warning(linux-2.6.24-git12//net/sunrpc/rpc_pipe.c:765): No description found for parameter 'flags'
Warning(linux-2.6.24-git12//net/sunrpc/clnt.c:584): No description found for parameter 'tk_ops'
Warning(linux-2.6.24-git12//net/sunrpc/clnt.c:618): No description found for parameter 'bufsize'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In order to be able to support setting the timeo and retrans parameters on
a per-mountpoint basis, we move the rpc_timeout structure into the
rpc_clnt.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The sunrpc client exports are not meant to be part of any official kernel
API: they can change at the drop of a hat. Mark them as internal functions
using EXPORT_SYMBOL_GPL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Do this for all RPC client related functions and XDR functions.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
xprt_disconnect() should really only be called when the transport shutdown
is completed, and it is time to wake up any pending tasks. Rename it to
xprt_disconnect_done() in order to reflect the semantical change.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The transport layer should do that itself whenever appropriate.
Note that the RDMA transport already assumes that it needs to call
xprt_disconnect in xprt_rdma_close().
For TCP sockets, we want to call xprt_disconnect() only after the
connection has been closed by both ends.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
When scheduling the autoclose RPC call, we want to ensure that we don't
race against the test_bit() call in xprt_clear_locked().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Many-many code in the kernel initialized the timer->function
and timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.
The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To prepare for including non-sockets-based RPC transports, select
RPC transports by an identifier (to be used in following patches).
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
To prepare for including non-sockets-based RPC transports, change the
overly suggestive name of the transport creation arguments struct.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Allow RPC client transport implementations to be loaded as needed, or
as they become available from distributors or third-party vendors.
Note that we leave the IP sockets implementation in sunrpc.o
permanently, as IP functionality is always available in any
kernel that runs NFS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
To allow transport capabilities to be loaded dynamically, provide an API
for registering and unregistering the transports with the RPC client.
Eventually xprt_create_transport() will be changed to search the list of
registered transports when initializing a fresh transport.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions
As a preface to allowing arbitrary transport modules to be loaded
dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions
that a transport implementation might want to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Cleanup argument passing to functions for creating an RPC transport.
Signed-off-by: Frank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Brian Behlendorf writes:
The root cause of the NFS hang we were observing appears to be a rare
deadlock between the kernel provided usermodehelper API and the linux NFS
client. The deadlock can arise because both of these services use the
generic linux work queues. The usermodehelper API run the specified user
application in the context of the work queue. And NFS submits both cleanup
and reconnect work to the generic work queue for handling. Normally this
is fine but a deadlock can result in the following situation.
- NFS client is in a disconnected state
- [events/0] runs a usermodehelper app with an NFS dependent operation,
this triggers an NFS reconnect.
- NFS reconnect happens to be submitted to [events/0] work queue.
- Deadlock, the [events/0] work queue will never process the
reconnect because it is blocked on the previous NFS dependent
operation which will not complete.`
The solution is simply to run reconnect requests on rpciod.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Introduce a replacement for the in-kernel portmapper client that supports
all 3 versions of the rpcbind protocol. This code is not used yet.
Original code by Groupe Bull updated for the latest kernel, with multiple
bug fixes.
Note that rpcb_clnt.c does not yet support registering via versions 3 and
4 of the rpcbind protocol. That is planned for a later patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Currently rpc_malloc sets req->rq_buffer internally. Make this a more
generic interface: return a pointer to the new buffer (or NULL) and
make the caller set req->rq_buffer and req->rq_bufsize. This looks much
more like kmalloc and eliminates the side effects.
To fix a potential deadlock, this patch also replaces GFP_NOFS with
GFP_NOWAIT in rpc_malloc. This prevents async RPCs from sleeping outside
the RPC's task scheduler while allocating their buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The RPC buffer size estimation logic in net/sunrpc/clnt.c always
significantly overestimates the requirements for the buffer size.
A little instrumentation demonstrated that in fact rpc_malloc was never
allocating the buffer from the mempool, but almost always called kmalloc.
To compute the size of the RPC buffer more precisely, split p_bufsiz into
two fields; one for the argument size, and one for the result size.
Then, compute the sum of the exact call and reply header sizes, and split
the RPC buffer precisely between the two. That should keep almost all RPC
buffers within the 2KiB buffer mempool limit.
And, we can finally be rid of RPC_SLACK_SPACE!
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Fix a regression due to the patch "NFS: disconnect before retrying NFSv4
requests over TCP"
The assumption made in xprt_transmit() that the condition
"req->rq_bytes_sent == 0 and request is on the receive list"
should imply that we're dealing with a retransmission is false.
Firstly, it may simply happen that the socket send queue was full
at the time the request was initially sent through xprt_transmit().
Secondly, doing this for each request that was retransmitted implies
that we disconnect and reconnect for _every_ request that happened to
be retransmitted irrespective of whether or not a disconnection has
already occurred.
Fix is to move this logic into the call_status request timeout handler.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Conflicts:
net/sunrpc/auth_gss/gss_krb5_crypto.c
net/sunrpc/auth_gss/gss_spkm3_token.c
net/sunrpc/clnt.c
Merge with mainline and fix conflicts.
|
|
RFC3530 section 3.1.1 states an NFSv4 client MUST NOT send a request
twice on the same connection unless it is the NULL procedure. Section
3.1.1 suggests that the client should disconnect and reconnect if it
wants to retry a request.
Implement this by adding an rpc_clnt flag that an ULP can use to
specify that the underlying transport should be disconnected on a
major timeout. The NFSv4 client asserts this new flag, and requests
no retries after a minor retransmit timeout.
Note that disconnecting on a retransmit is in general not safe to do
if the RPC client does not reuse the TCP port number when reconnecting.
See http://bugzilla.linux-nfs.org/show_bug.cgi?id=6
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tk_pid field is an unsigned short. The proper print format specifier for
that type is %5u, not %4d.
Also clean up some miscellaneous print formatting nits.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Conflicts:
include/linux/sunrpc/xprt.h
net/sunrpc/xprtsock.c
Fix up conflicts with the workqueue changes.
|
|
These appear to be deprecated. Removing them also gets rid of some sparse
noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Change the location where the rpc_xprt structure is allocated so each
transport implementation can allocate a private area from the same
chunk of memory.
Note also that xprt->ops->destroy, rather than xprt_destroy, is now
responsible for freeing rpc_xprt when the transport is destroyed.
Test plan:
Connectathon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.
For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.
To make this work, an extra flag is introduced into the management side of the
work_struct. This governs auto-release of the structure upon execution.
Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function. This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated.. This is a
problem if the auxiliary data is taken away (as done by the last patch).
However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems. But then the work function must itself release the
work_struct by calling work_release().
In most cases, automatic release is fine, so this is the default. Special
initiators exist for the non-auto-release case (ending in _NAR).
Signed-Off-By: David Howells <dhowells@redhat.com>
|
|
pure s/u32/__be32/
[AV: large part based on Alexey's patches]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a subsequent patch, this will allow the portmapper to take a reference
to the rpc_xprt for which it is updating the port number, fixing an Oops.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
- Ensure that the task aborts the RPC call only when it has actually timed out.
- Ensure that req->rq_majortimeo is initialised correctly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The two function call API for creating a new RPC client is now obsolete.
Remove it.
Also, remove an unnecessary check to see whether the caller is capable of
using privileged network services. The kernel RPC client always uses a
privileged ephemeral port by default; callers are responsible for checking
the authority of users to make use of any RPC service, or for specifying
that a nonprivileged port is acceptable.
Test plan:
Repeated runs of Connectathon locking suite. Check network trace to ensure
correctness of NLM requests and replies.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
