summaryrefslogtreecommitdiff
path: root/net/rxrpc/rxkad.c
AgeCommit message (Collapse)AuthorFilesLines
2018-09-28rxrpc: Remove VLA usage of skcipherKees Cook1-22/+22
In the quest to remove all stack VLA usage from the kernel[1], this replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(), which uses a fixed stack size. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: David Howells <dhowells@redhat.com> Cc: linux-afs@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-09Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+2
Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst adding some tracepoints. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08rxrpc: Fix the keepalive generator [ver #2]David Howells1-2/+2
AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03rxrpc: Reuse SKCIPHER_REQUEST_ON_STACK bufferKees Cook1-12/+13
The use of SKCIPHER_REQUEST_ON_STACK() will trigger FRAME_WARN warnings (when less than 2048) once the VLA is no longer hidden from the check: net/rxrpc/rxkad.c:398:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=] net/rxrpc/rxkad.c:242:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=] This passes the initial SKCIPHER_REQUEST_ON_STACK allocation to the leaf functions for reuse. Two requests allocated on the stack is not needed when only one is used at a time. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01rxrpc: Trace packet transmissionDavid Howells1-2/+5
Trace successful packet transmission (kernel_sendmsg() succeeded, that is) in AF_RXRPC. We can share the enum that defines the transmission points with the trace_rxrpc_tx_fail() tracepoint, so rename its constants to be applicable to both. Also, save the internal call->debug_id in the rxrpc_channel struct so that it can be used in retransmission trace lines. Signed-off-by: David Howells <dhowells@redhat.com>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-10rxrpc: Trace UDP transmission failureDavid Howells1-2/+4
Add a tracepoint to log transmission failure from the UDP transport socket being used by AF_RXRPC. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-30rxrpc: Fix firewall route keepaliveDavid Howells1-0/+2
Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-02-08rxrpc: Don't put crypto buffers on the stackDavid Howells1-41/+51
Don't put buffers of data to be handed to crypto on the stack as this may cause an assertion failure in the kernel (see below). Fix this by using an kmalloc'd buffer instead. kernel BUG at ./include/linux/scatterlist.h:147! ... RIP: 0010:rxkad_encrypt_response.isra.6+0x191/0x1b0 [rxrpc] RSP: 0018:ffffbe2fc06cfca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff989277d59900 RCX: 0000000000000028 RDX: 0000259dc06cfd88 RSI: 0000000000000025 RDI: ffffbe30406cfd88 RBP: ffffbe2fc06cfd60 R08: ffffbe2fc06cfd08 R09: ffffbe2fc06cfd08 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff7c5f80d9f95 R13: ffffbe2fc06cfd88 R14: ffff98927a3f7aa0 R15: ffffbe2fc06cfd08 FS: 0000000000000000(0000) GS:ffff98927fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b1ff28f0f8 CR3: 000000001b412003 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxkad_respond_to_challenge+0x297/0x330 [rxrpc] rxrpc_process_connection+0xd1/0x690 [rxrpc] ? process_one_work+0x1c3/0x680 ? __lock_is_held+0x59/0xa0 process_one_work+0x249/0x680 worker_thread+0x3a/0x390 ? process_one_work+0x680/0x680 kthread+0x121/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29rxrpc: Fix IPv6 supportDavid Howells1-4/+4
Fix IPv6 support in AF_RXRPC in the following ways: (1) When extracting the address from a received IPv4 packet, if the local transport socket is open for IPv6 then fill out the sockaddr_rxrpc struct for an IPv4-mapped-to-IPv6 AF_INET6 transport address instead of an AF_INET one. (2) When sending CHALLENGE or RESPONSE packets, the transport length needs to be set from the sockaddr_rxrpc::transport_len field rather than sizeof() on the IPv4 transport address. (3) When processing an IPv4 ICMP packet received by an IPv6 socket, set up the address correctly before searching for the affected peer. Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29net: rxrpc: Replace time_t type with time64_t typeBaolin Wang1-7/+7
Since the 'expiry' variable of 'struct key_preparsed_payload' has been changed to 'time64_t' type, which is year 2038 safe on 32bits system. In net/rxrpc subsystem, we need convert 'u32' type to 'time64_t' type when copying ticket expires time to 'prep->expiry', then this patch introduces two helper functions to help convert 'u32' to 'time64_t' type. This patch also uses ktime_get_real_seconds() to get current time instead of get_seconds() which is not year 2038 safe on 32bits system. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-05rxrpc: Separate the connection's protocol service ID from the lookup IDDavid Howells1-1/+1
Keep the rxrpc_connection struct's idea of the service ID that is exposed in the protocol separate from the service ID that's used as a lookup key. This allows the protocol service ID on a client connection to get upgraded without making the connection unfindable for other client calls that also would like to use the upgraded connection. The connection's actual service ID is then returned through recvmsg() by way of msg_name. Whilst we're at it, we get rid of the last_service_id field from each channel. The service ID is per-connection, not per-call and an entire connection is upgraded in one go. Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-04rxrpc: check return value of skb_to_sgvec alwaysJason A. Donenfeld1-5/+14
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06rxrpc: Trace protocol errors in received packetsDavid Howells1-33/+73
Add a tracepoint (rxrpc_rx_proto) to record protocol errors in received packets. The following changes are made: (1) Add a function, __rxrpc_abort_eproto(), to note a protocol error on a call and mark the call aborted. This is wrapped by rxrpc_abort_eproto() that makes the why string usable in trace. (2) Add trace_rxrpc_rx_proto() or rxrpc_abort_eproto() to protocol error generation points, replacing rxrpc_abort_call() with the latter. (3) Only send an abort packet in rxkad_verify_packet*() if we actually managed to abort the call. Note that a trace event is also emitted if a kernel user (e.g. afs) tries to send data through a call when it's not in the transmission phase, though it's not technically a receive event. Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-06rxrpc: Handle temporary errors better in rxkad securityDavid Howells1-38/+40
In the rxkad security module, when we encounter a temporary error (such as ENOMEM) from which we could conceivably recover, don't abort the connection, but rather permit retransmission of the relevant packets to induce a retry. Note that I'm leaving some places that could be merged together to insert tracing in the next patch. Signed-off-by; David Howells <dhowells@redhat.com>
2017-04-06rxrpc: Use negative error codes in rxrpc_call structDavid Howells1-9/+9
Use negative error codes in struct rxrpc_call::error because that's what the kernel normally deals with and to make the code consistent. We only turn them positive when transcribing into a cmsg for userspace recvmsg. Signed-off-by: David Howells <dhowells@redhat.com>
2016-10-06rxrpc: Fix warning by splitting rxrpc_send_call_packet()David Howells1-3/+3
Split rxrpc_send_data_packet() to separate ACK generation (which is more complicated) from ABORT generation. This simplifies the code a bit and fixes the following warning: In file included from ../net/rxrpc/output.c:20:0: net/rxrpc/output.c: In function 'rxrpc_send_call_packet': net/rxrpc/ar-internal.h:1187:27: error: 'top' may be used uninitialized in this function [-Werror=maybe-uninitialized] net/rxrpc/output.c:103:24: note: 'top' was declared here net/rxrpc/output.c:225:25: error: 'hard_ack' may be used uninitialized in this function [-Werror=maybe-uninitialized] Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-30rxrpc: The offset field in struct rxrpc_skb_priv is unnecessaryDavid Howells1-3/+6
The offset field in struct rxrpc_skb_priv is unnecessary as the value can always be calculated. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-22rxrpc: Don't store the rxrpc header in the Tx queue sk_buffsDavid Howells1-5/+3
Don't store the rxrpc protocol header in sk_buffs on the transmit queue, but rather generate it on the fly and pass it to kernel_sendmsg() as a separate iov. This reduces the amount of storage required. Note that the security header is still stored in the sk_buff as it may get encrypted along with the data (and doesn't change with each transmission). Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08rxrpc: Rewrite the data and ack handling codeDavid Howells1-29/+79
Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-07rxrpc: Add tracepoint for working out where aborts happenDavid Howells1-60/+48
Add a tracepoint for working out where local aborts happen. Each tracepoint call is labelled with a 3-letter code so that they can be distinguished - and the DATA sequence number is added too where available. rxrpc_kernel_abort_call() also takes a 3-letter code so that AFS can indicate the circumstances when it aborts a call. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-23rxrpc: Drop channel number field from rxrpc_call structDavid Howells1-2/+2
Drop the channel number (channel) field from the rxrpc_call struct to reduce the size of the call struct. The field is redundant: if the call is attached to a connection, the channel can be obtained from there by AND'ing with RXRPC_CHANNELMASK. Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06rxrpc: Call channels should have separate call number spacesDavid Howells1-14/+27
Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06rxrpc: Avoid using stack memory in SG lists in rxkadHerbert Xu1-102/+48
rxkad uses stack memory in SG lists which would not work if stacks were allocated from vmalloc memory. In fact, in most cases this isn't even necessary as the stack memory ends up getting copied over to kmalloc memory. This patch eliminates all the unnecessary stack memory uses by supplying the final destination directly to the crypto API. In two instances where a temporary buffer is actually needed we also switch use a scratch area in the rxrpc_call struct (only one DATA packet will be being secured or verified at a time). Finally there is no need to split a split-page buffer into two SG entries so code dealing with that has been removed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22rxrpc: Replace conn->trans->{local,peer} with conn->params.{local,peer}David Howells1-6/+6
Replace accesses of conn->trans->{local,peer} with conn->params.{local,peer} thus making it easier for a future commit to remove the rxrpc_transport struct. This also reduces the number of memory accesses involved. Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22rxrpc: Use structs to hold connection params and protocol infoDavid Howells1-31/+31
Define and use a structure to hold connection parameters. This makes it easier to pass multiple connection parameters around. Define and use a structure to hold protocol information used to hash a connection for lookup on incoming packet. Most of these fields will be disposed of eventually, including the duplicate local pointer. Whilst we're at it rename "proto" to "family" when referring to a protocol family. Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+1
Conflicts: net/sched/act_police.c net/sched/sch_drr.c net/sched/sch_hfsc.c net/sched/sch_prio.c net/sched/sch_red.c net/sched/sch_tbf.c In net-next the drop methods of the packet schedulers got removed, so the bug fixes to them in 'net' are irrelevant. A packet action unload crash fix conflicts with the addition of the new firstuse timestamp. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07rxrpc: fix ptr_ret.cocci warningsWu Fengguang1-3/+1
net/rxrpc/rxkad.c:1165:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: David Howells <dhowells@redhat.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03rxrpc: Use pr_<level> and pr_fmt, reduce object size a few KBJoe Perches1-0/+2
Use the more common kernel logging style and reduce object size. The logging message prefix changes from a mixture of "RxRPC:" and "RXRPC:" to "af_rxrpc: ". $ size net/rxrpc/built-in.o* text data bss dec hex filename 64172 1972 8304 74448 122d0 net/rxrpc/built-in.o.new 67512 1972 8304 77788 12fdc net/rxrpc/built-in.o.old Miscellanea: o Consolidate the ASSERT macros to use a single pr_err call with decimal and hexadecimal output and a stringified #OP argument Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11rxrpc: Absorb the rxkad security moduleDavid Howells1-36/+25
Absorb the rxkad security module into the af_rxrpc module so that there's only one module file. This avoids a circular dependency whereby rxkad pins af_rxrpc and cached connections pin rxkad but can't be manually evicted (they will expire eventually and cease pinning). With this change, af_rxrpc can just be unloaded, despite having cached connections. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-81/+84
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-04rxrpc: rxkad: Casts are needed when comparing be32 valuesDavid Howells1-1/+1
Forced casts are needed to avoid sparse warning when directly comparing be32 values. Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04rxrpc: rxkad: The version number in the response should be net byte orderDavid Howells1-8/+9
The version number rxkad places in the response should be network byte order. Whilst we're at it, rearrange the code to be more readable. Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04rxrpc: Adjust some whitespace and commentsDavid Howells1-6/+6
Remove some excess whitespace, insert some missing spaces and adjust a couple of comments. Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04rxrpc: Keep the skb private record of the Rx header in host byte orderDavid Howells1-68/+70
Currently, a copy of the Rx packet header is copied into the the sk_buff private data so that we can advance the pointer into the buffer, potentially discarding the original. At the moment, this copy is held in network byte order, but this means we're doing a lot of unnecessary translations. The reasons it was done this way are that we need the values in network byte order occasionally and we can use the copy, slightly modified, as part of an iov array when sending an ack or an abort packet. However, it seems more reasonable on review that it would be better kept in host byte order and that we make up a new header when we want to send another packet. To this end, rename the original header struct to rxrpc_wire_header (with BE fields) and institute a variant called rxrpc_host_header that has host order fields. Change the struct in the sk_buff private data into an rxrpc_host_header and translate the values when filling it in. This further allows us to keep values kept in various structures in host byte order rather than network byte order and allows removal of some fields that are byteswapped duplicates. Signed-off-by: David Howells <dhowells@redhat.com>
2016-01-27rxrpc: Use skcipherHerbert Xu1-65/+107
This patch replaces uses of blkcipher with skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-21KEYS: Merge the type-specific data with the payload dataDavid Howells1-8/+8
Merge the type-specific data with the payload data into one four-word chunk as it seems pointless to keep them separate. Use user_key_payload() for accessing the payloads of overloaded user-defined keys. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-cifs@vger.kernel.org cc: ecryptfs@vger.kernel.org cc: linux-ext4@vger.kernel.org cc: linux-f2fs-devel@lists.sourceforge.net cc: linux-nfs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: linux-ima-devel@lists.sourceforge.net
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet1-3/+3
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-09-15RxRPC: Allow key payloads to be passed in XDR formDavid Howells1-20/+21
Allow add_key() and KEYCTL_INSTANTIATE to accept key payloads in XDR form as described by openafs-1.4.10/src/auth/afs_token.xg. This provides a way of passing kaserver, Kerberos 4, Kerberos 5 and GSSAPI keys from userspace, and allows for future expansion. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15RxRPC: Declare the security index constants symbolicallyDavid Howells1-3/+3
Declare the security index constants symbolically rather than just referring to them numerically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31net: replace NIPQUAD() in net/*/Harvey Harrison1-1/+1
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24RxRPC: Fix a regression in the RXKAD security moduleDavid Howells1-1/+1
Fix a regression in the RXKAD security module introduced in: commit 91e916cffec7c0153c5cbaa447151862a7a9a047 Author: Al Viro <viro@ftp.linux.org.uk> Date: Sat Mar 29 03:08:38 2008 +0000 net/rxrpc trivial annotations A variable was declared as a 16-bit type rather than a 32-bit type. Signed-off-by: David Howells <dhowells@redhat.com> Acked-with-apologies-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-16AFS: Do not describe debug parameters with their valuePaul Bolle1-1/+1
Describe debug parameters with their names (and not their values). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30net/rxrpc trivial annotationsAl Viro1-12/+15
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28[RXRPC]: Use cpu_to_be32() where appropriate.YOSHIFUJI Hideaki1-2/+2
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-07[AF_RXRPC]: Add a missing gotoDavid Howells1-0/+1
Add a missing goto to error handling in the RXKAD security module for AF_RXRPC. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-02[SG] Get rid of __sg_mark_end()Jens Axboe1-1/+1
sg_mark_end() overwrites the page_link information, but all users want __sg_mark_end() behaviour where we just set the end bit. That is the most natural way to use the sg list, since you'll fill it in and then mark the end point. So change sg_mark_end() to only set the termination bit. Add a sg_magic debug check as well, and clear a chain pointer if it is set. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-30[NET]: Fix incorrect sg_mark_end() calls.David S. Miller1-4/+5
This fixes scatterlist corruptions added by commit 68e3f5dd4db62619fdbe520d36c9ebf62e672256 [CRYPTO] users: Fix up scatterlist conversion errors The issue is that the code calls sg_mark_end() which clobbers the sg_page() pointer of the final scatterlist entry. The first part fo the fix makes skb_to_sgvec() do __sg_mark_end(). After considering all skb_to_sgvec() call sites the most correct solution is to call __sg_mark_end() in skb_to_sgvec() since that is what all of the callers would end up doing anyways. I suspect this might have fixed some problems in virtio_net which is the sole non-crypto user of skb_to_sgvec(). Other similar sg_mark_end() cases were converted over to __sg_mark_end() as well. Arguably sg_mark_end() is a poorly named function because it doesn't just "mark", it clears out the page pointer as a side effect, which is what led to these bugs in the first place. The one remaining plain sg_mark_end() call is in scsi_alloc_sgtable() and arguably it could be converted to __sg_mark_end() if only so that we can delete this confusing interface from linux/scatterlist.h Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27[CRYPTO] users: Fix up scatterlist conversion errorsHerbert Xu1-33/+33
This patch fixes the errors made in the users of the crypto layer during the sg_init_table conversion. It also adds a few conversions that were missing altogether. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 02:42:26 +0000