summaryrefslogtreecommitdiff
path: root/net/nfc/nci
AgeCommit message (Collapse)AuthorFilesLines
2014-05-20NFC: NCI: Send all NCI frames to raw socketsHiren Tandel1-0/+9
So that anyone listening on SOCKPROTO_RAW for raw frames will get all NCI frames, in both directions. This actually implements userspace NFC NCI sniffing. It's now up to userspace to decode those frames. Signed-off-by: Hiren Tandel <hirent@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-19NFC: NCI: No need to reverse ATR_RES ResponseHiren Tandel1-5/+2
ATR_RES response received within Activation Parameters is already in correct order. Reversing it fails LLCP magic number check and so P2P functionality fails. Signed-off-by: Hiren Tandel <hirent@marvell.com> Signed-off-by: Rahul Tank <rahult@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-03-17Merge tag 'nfc-next-3.15-1' of ↵John W. Linville2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.15: First pull request This is the NFC pull request for 3.15. With this one we have: - Support for ISO 15693 a.k.a. NFC vicinity a.k.a. Type 5 tags. ISO 15693 are long range (1 - 2 meters) vicinity tags/cards. The kernel now supports those through the NFC netlink and digital APIs. - Support for TI's trf7970a chipset. This chipset relies on the NFC digital layer and the driver currently supports type 2, 4A and 5 tags. - Support for NXP's pn544 secure firmare download. The pn544 C3 chipsets relies on a different firmware download protocal than the C2 one. We now support both and use the right one depending on the version we detect at runtime. - Support for 4A tags from the NFC digital layer. - A bunch of cleanups and minor fixes from Axel Lin and Thierry Escande." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-23NFC: NCI: Use reinit_completion() at appropriate placesAxel Lin2-2/+4
Calling init_completion() once is enough. Then use reinit_completion() instead in __nci_request() and nci_spi_send(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-02-23NFC: NCI: Fix NULL pointer dereferenceAmitkumar Karwar1-1/+1
The check should be for setup function pointer. This patch fixes NULL pointer dereference issue for NCI based NFC driver which doesn't define setup handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: NCI: Add set_config APIAmitkumar Karwar1-0/+16
This API can be used by drivers to send their custom configuration using SET_CONFIG NCI command to the device. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: NCI: Add setup handlerAmitkumar Karwar1-0/+3
Some drivers require special configuration while initializing. This patch adds setup handler for this custom configuration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: NCI: Don't reverse local general bytesAmitkumar Karwar1-6/+0
Local general bytes returned by nfc_get_local_general_bytes() are already in correct order. We don't need to reverse them. Remove local_gb[] local array as it's not needed any more. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-05NFC: NCI: Cancel cmd_timer in nci_close_device()Amitkumar Karwar1-0/+2
nci_close_device() sends nci reset command to the device. If there is no response for this command, nci request timeout occurs first and then cmd timeout happens. Because command timer has started after sending the command. We are immediately flushing command workqueue after nci timeout. Later we will try to schedule cmd_work in command timer which leads to a crash. Cancel cmd_timer before flushing the workqueue to fix the problem. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-12-11nfc: Fix FSF address in file headersJeff Kirsher5-10/+5
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Lauro Ramos Venancio <lauro.venancio@openbossa.org> CC: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-25NFC: NCI: Modify NCI SPI to implement CS/INT handshake per the specEric Lapuyade1-22/+31
The NFC Forum NCI specification defines both a hardware and software protocol when using a SPI physical transport to connect an NFC NCI Chipset. The hardware requirement is that, after having raised the chip select line, the SPI driver must wait for an INT line from the NFC chipset to raise before it sends the data. The chip select must be raised first though, because this is the signal that the NFC chipset will detect to wake up and then raise its INT line. If the INT line doesn't raise in a timely fashion, the SPI driver should abort operation. When data is transferred from Device host (DH) to NFC Controller (NFCC), the signaling sequence is the following: Data Transfer from DH to NFCC • 1-Master asserts SPI_CSN • 2-Slave asserts SPI_INT • 3-Master sends NCI-over-SPI protocol header and payload data • 4-Slave deasserts SPI_INT • 5-Master deasserts SPI_CSN When data must be transferred from NFCC to DH, things are a little bit different. Data Transfer from NFCC to DH • 1-Slave asserts SPI_INT -> NFC chipset irq handler called -> process reading from SPI • 2-Master asserts SPI_CSN • 3-Master send 2-octet NCI-over-SPI protocol header • 4-Slave sends 2-octet NCI-over-SPI protocol payload length • 5-Slave sends NCI-over-SPI protocol payload • 6-Master deasserts SPI_CSN In this case, SPI driver should function normally as it does today. Note that the INT line can and will be lowered anytime between beginning of step 3 and end of step 5. A low INT is therefore valid after chip select has been raised. This would be easily implemented in a single driver. Unfortunately, we don't write the SPI driver and I had to imagine some workaround trick to get the SPI and NFC drivers to work in a synchronized fashion. The trick is the following: - send an empty spi message: this will raise the chip select line, and send nothing. We expect the /CS line will stay arisen because we asked for it in the spi_transfer cs_change field - wait for a completion, that will be completed by the NFC driver IRQ handler when it knows we are in the process of sending data (NFC spec says that we use SPI in a half duplex mode, so we are either sending or receiving). - when completed, proceed with the normal data send. This has been tested and verified to work very consistently on a Nexus 10 (spi-s3c64xx driver). It may not work the same with other spi drivers. The previously defined nci_spi_ops{} whose intended purpose were to address this problem are not used anymore and therefore totally removed. The nci_spi_send() takes a new optional write_handshake_completion completion pointer. If non NULL, the nci spi layer will run the above trick when sending data to the NFC Chip. If NULL, the data is sent normally all at once and it is then the NFC driver responsibility to know what it's doing. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: nci_spi_recv_frame() now returns (not forward) the read frameEric Lapuyade1-16/+10
Previously, nci_spi_recv_frame() would directly transmit incoming frames to the NCI Core. However, it turns out that some NFC NCI Chips will add additional proprietary headers that must be handled/removed before NCI Core gets a chance to handle the frame. With this modification, the chip phy or driver are now responsible to transmit incoming frames to NCI Core after proper treatment, and NCI SPI becomes a driver helper instead of sitting between the NFC driver and NCI Core. As a general rule in NFC, *_recv_frame() APIs are used to deliver an incoming frame to an upper layer. To better suit the actual purpose of nci_spi_recv_frame(), and go along with its nci_spi_send() counterpart, the function is renamed to nci_spi_read() The skb is returned as the function result Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: zero struct spi_transfer variables before usageEric Lapuyade1-0/+9
Using ARM compiler, and without zero-ing spi_transfer, spi-s3c64xx driver would issue abnormal errors due to bpw field value being set to unexpected value. This structure MUST be set to all zeros except for those field specifically used. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: Store the spi device pointer from the spi instanceEric Lapuyade1-0/+1
Storing the spi device was forgotten in the original implementation, which would pretty obviously cause some kind of serious crash when actually trying to send something through that device. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: Simplify NCI SPI to become a simple framing/checking layerEric Lapuyade1-125/+55
NCI SPI layer should not manage the nci dev, this is the job of the nci chipset driver. This layer should be limited to frame/deframe nci packets, and optionnaly check integrity (crc) and manage the ack/nak protocol. The NCI SPI must not be mixed up with an NCI dev. spi_[dev|device] are therefore renamed to a simple spi for more clarity. The header and crc sizes are moved to nci.h so that drivers can use them to reserve space in outgoing skbs. nci_spi_send() is exported to be accessible by drivers. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: Rename spi ndev -> nsdev and nci_dev -> ndev for consistencyEric Lapuyade1-64/+64
An hci dev is an hdev. An nci dev is an ndev. Calling an nci spi dev an ndev is misleading since it's not the same thing. The nci dev contained in the nci spi dev is also named inconsistently. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: Fix wrong allocation size in nci_spi_allocate_device()Eric Lapuyade1-1/+1
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-19NFC: Fix NCI over SPI buildFrederic Danis1-0/+1
kbuild test robot found following error: net/built-in.o: In function `nci_spi_send': >> spi.c:(.text+0x19a76f): undefined reference to `crc_ccitt' Add CRC_CCITT module to Kconfig to fix it Reported-by: kbuild test robot. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Extend and fix the internal secure element APISamuel Ortiz1-0/+18
Secure elements need to be discovered after enabling the NFC controller. This is typically done by the NCI core and the HCI drivers (HCI does not specify how to discover SEs, it is left to the specific drivers). Also, the SE enable/disable API explicitely takes a SE index as its argument. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Remove the static supported_se fieldSamuel Ortiz2-4/+1
Supported secure elements are typically found during a discovery process initiated when the NFC controller is up and running. For a given NFC chipset there can be many configurations (embedded SE or not, with or without a SIM card wired to the NFC controller SWP interface, etc...) and thus driver code will never know before hand which SEs are available. So we remove this field, it will be replaced by a real SE discovery mechanism. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add NCI over SPI receiveFrederic Danis1-0/+174
Before any operation, driver interruption is de-asserted to prevent race condition between TX and RX. Transaction starts by emitting "Direct read" and acknowledged mode bytes. Then packet length is read allowing to allocate correct NCI socket buffer. After that payload is retrieved. A delay after the transaction can be added. This delay is determined by the driver during nci_spi_allocate_device() call and can be 0. If acknowledged mode is set: - CRC of header and payload is checked - if frame reception fails (CRC error): NACK is sent - if received frame has ACK or NACK flag: unblock nci_spi_send() Payload is passed to NCI module. At the end, driver interruption is re asserted. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add NCI over SPI sendFrederic Danis1-1/+70
Before any operation, driver interruption is de-asserted to prevent race condition between TX and RX. The NCI over SPI header is added in front of NCI packet. If acknowledged mode is set, CRC-16-CCITT is added to the packet. Then the packet is forwarded to SPI module to be sent. A delay after the transaction is added. This delay is determined by the driver during nci_spi_allocate_device() call and can be 0. After data has been sent, driver interruption is re-asserted. If acknowledged mode is set, nci_spi_send will block until acknowledgment is received. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add basic NCI over SPIFrederic Danis3-1/+149
The NFC Forum defines a transport interface based on Serial Peripheral Interface (SPI) for the NFC Controller Interface (NCI). This module implements the SPI transport of NCI, calling SPI module directly to read/write data to NFC controller (NFCC). NFCC driver should provide functions performing device open and close. It should also provide functions asserting/de-asserting interruption to prevent TX/RX race conditions. NFCC driver can also fix a delay between transactions if needed by the hardware. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: NCI: Fix skb->dev usageFrederic Danis2-13/+6
skb->dev is used for carrying a net_device pointer and not an nci_dev pointer. Remove usage of skb-dev to carry nci_dev and replace it by parameter in nci_recv_frame(), nci_send_frame() and driver send() functions. NfcWilink driver is also updated to use those functions. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Initial Secure Element APISamuel Ortiz1-0/+2
Each NFC adapter can have several links to different secure elements and that property needs to be exported by the drivers. A secure element link can be enabled and disabled, and card emulation will be handled by the currently active one. Otherwise card emulation will be host implemented. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Remove CONFIG_EXPERIMENTAL from the NCI MakefileKees Cook1-2/+2
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Fix some code style and whitespace issuesSzymon Janc1-1/+0
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Fix style issues with logical operationsSzymon Janc1-8/+8
Logical continuations should be on the previous line. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Remove not needed local variable in nci_set_local_general_bytesSzymon Janc1-6/+4
No need for local rc variable as result of nci_request can be returned directly. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Use NFC_MAX_GT_LEN to check len in nci_set_local_general_bytesSzymon Janc1-1/+1
local_gb is of size NFC_MAX_GT_LEN and len is used as index for it. Check len against this instead of NCI_MAX_PARAM_LEN before accessing local_gb. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Implement NCI dep_link_up and dep_link_downIlan Elias2-1/+55
During NFC-DEP target activation, store the remote general bytes to be used later in dep_link_up. When dep_link_up is called, activate the NFC-DEP target, and forward the remote general bytes. When dep_link_down is called, deactivate the target. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Parse NCI NFC-DEP activation paramsIlan Elias1-0/+32
Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Set local general bytes in nci_start_pollIlan Elias2-0/+69
If initiator protocol is NFC-DEP, set the local general bytes in nci_start_poll. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-17Merge branch 'master' of ↵John W. Linville1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-07-12NFC: NCI module license 'unspecified' taints kernelDave Jones1-0/+3
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09NFC: Add ISO 14443 type B protocolSamuel Ortiz2-3/+7
Some devices (e.g. Sony's PaSoRi) can not do type B polling, so we have to make a distinction between ISO14443 type A and B poll modes. Cc: Eric Lapuyade <eric.lapuyade@intel.com> Cc: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09Merge branch 'master' of ↵John W. Linville1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/mlme.c
2012-06-25NFC: Prevent multiple buffer overflows in NCIDan Rosenberg1-5/+5
Fix multiple remotely-exploitable stack-based buffer overflows due to the NCI code pulling length fields directly from incoming frames and copying too much data into statically-sized arrays. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: stable@kernel.org Cc: security@kernel.org Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Introduce target mode tx opsSamuel Ortiz1-4/+4
And rename the initiator mode data exchange ops for consistency sake. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Add target mode protocols to the polling loop startup routineSamuel Ortiz1-3/+4
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-15NFC: Quiet nci/ntf.c sparse noise about plain integer as NULL pointerH Hartley Sweeten1-1/+1
Pointers should be cleared with NULL, not 0. Quiets a couple sparse warnings of the type: warning: Using plain integer as NULL pointer Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15NFC: Include nci_core.h to nci/lib.cH Hartley Sweeten1-0/+1
Include the header to pickup the exported symbol prototype. Quites the sparse warning: warning: symbol 'nci_to_errno' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> CC: Samuel Ortiz <sameo@linux.intel.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15NFC: Quiet nci/data.c sparse noise about plain integer as NULL pointerH Hartley Sweeten1-4/+4
Pointers should be cleared with NULL, not 0. Quiets a couple sparse warnings of the type: warning: Using plain integer as NULL pointer Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15NFC: Cache the core NFC active target pointer instead of its indexEric Lapuyade1-13/+14
The NFC Core now caches the active nfc target pointer, thereby avoiding the need to lookup the target table for each invocation of a driver ops. Consequently, pn533, HCI and NCI now directly receive an nfc_target pointer instead of a target index. Cc: Ilan Elias <ilane@ti.com> Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: The core part should generate the target indexSamuel Ortiz2-6/+7
The target index can be used by userspace to uniquely identify a target and thus should be kept unique, per NFC adapter. Moreover, some protocols do not provide a logical index when discovering new targets, so we have to generate one for them. For NCI or pn533 to fetch their logical index, we added a logical_idx field to the target structure. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: NCI code identation fixesSamuel Ortiz4-122/+111
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27nfc: NULL vs zero in nci_activate_target()Dan Carpenter1-1/+1
This is a pointer so it should be NULL instead of zero. Sparse complains about this stuff: net/nfc/nci/core.c:447:37: warning: Using plain integer as NULL pointer Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Add NCI multiple targets supportIlan Elias3-94/+337
Add the ability to select between multiple targets in NCI. If only one target is found, it will be auto-activated. If more than one target is found, then DISCOVER_NTF will be generated for each target, and the host should select one by calling DISCOVER_SELECT_CMD. Then, the target will be activated. If the activation fails, GENERIC_ERROR_NTF is generated. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Clearly separate NCI states from flagsIlan Elias3-12/+12
Make a clear separation between NCI states and flags. This is required in order to support more NCI states (e.g. for multiple targets support). Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Add NCI data exchange timerIlan Elias2-0/+28
Add NCI data exchange timer to catch timeouts, and call the data exchange callback with an error. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 01:43:04 +0000