summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2012-10-08mac80211: use ieee80211_free_txskb to fix possible skb leaksFelix Fietkau2-12/+14
A few places free skbs using dev_kfree_skb even though they're called after ieee80211_subif_start_xmit might have cloned it for tracking tx status. Use ieee80211_free_txskb here to prevent skb leaks. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mac80211: call drv_get_tsf() in sleepable contextThomas Pedersen1-2/+1
The call to drv_get/set_tsf() was put on the workqueue to perform tsf adjustments since that function might sleep. However it ended up inside a spinlock, whose critical section must be atomic. Do tsf adjustment outside the spinlock instead, and get rid of a warning. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-21mac80211: don't send delBA on addBA failureJohannes Berg1-1/+1
There's no reason to send a delBA when the peer refused our addBA, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21mac80211: don't send delBA when removing stationsJohannes Berg1-1/+1
When a station is removed and we stop the aggregation sessions, it's not useful to send delBA since this is due to us or the station disassociating or dropping the connection in some other way, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21mac80211: don't send delBA before disassocJohannes Berg1-1/+1
When we disassociate, it's not really useful to send delBA action frames since we're going to send disassoc/deauth anyway, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-20mac80211: fix IBSS auth TX debug messageSylvain Roger Rieunier1-1/+1
In the IBSS auth TX debug message the BSSID and DA address are reversed, fix that. Signed-off-by: Sylvain Roger Rieunier <sylvain.roger.rieunier@gmail.com> [reword commit message and make it fit 72 cols] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-19cfg80211: constify name parameter to add_virtual_intfJohannes Berg1-1/+2
The name can't be modified by the driver, make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-19mac80211: make reset debugfs depend on CONFIG_PMJohannes Berg1-0/+4
The suspend/resume code depends on CONFIG_PM, so the reset debugfs file can only be made available if that is enabled. Fengguang Wu's zero-day build testing found this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: allow re-open the blocked peer link in meshChun-Yeow Yeoh1-1/+2
Peer link which is blocked using the "iw mesh0 station set <MAC addr> plink_action block" is previously not able to re-open using "iw mesh0 station set <MAC addr> plink_action open". This patch is intended to solve this. If the station plink state remains at OPN_SNT once open, try block and open again should solve this problem. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: change locking around ieee80211_recalc_smpsJohannes Berg4-8/+5
Make the function acquire the necessary mutex itself to simplify the callers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: handle power constraint/country IE betterJohannes Berg3-22/+72
Currently, mac80211 uses the power constraint IE, and reduces the regulatory max TX power by it. This can cause issues if the AP is advertising a large power constraint value matching a high TX power in its country IE, for example in this case: ... Country: US Environment: Indoor/Outdoor ... Channels [157 - 157] @ 30 dBm ... Power constraint: 13 dB ... What happened here is that our local regulatory TX power is 15 dBm, and gets reduced by 13 dB so we end up with only 2 dBm effective TX power, which is way too low. Instead, handle the country IE/power constraint IE combined and restrict our TX power to the max of the regulatory power and the maximum power advertised by the AP, in this case 17 dBm (= 30 dBm - 13 dB). Also print a message when this happens to let the user know and help us debug issues with it. Reported-by: Carl A. Cook <CACook@quantum-equities.com> Tested-by: Carl A. Cook <CACook@quantum-equities.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-11mac80211: remove unneeded CONFIG_PM ifdefJohannes Berg1-13/+0
The functions are only called if CONFIG_PM is set as the callers are under an ifdef, so there's no need to also define no-op functions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: validate skb->dev in the tx status pathFelix Fietkau1-18/+30
skb->dev might contain a stale reference to a device that was already deleted, and using it unchecked can lead to invalid pointer accesses. Since this is only used for nl80211 tx, iterate over active interfaces to find a match for skb->dev, and discard the tx status if the device is gone. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: use call_rcu() on sta deletionEliad Peller3-57/+81
mac80211 calls synchronize_rcu() on sta deletion, which increase the roaming time significantly. Convert it into a call_rcu() mechanism, in order to avoid blocking. Since some of the cleanup functions might sleep, schedule from the call_rcu callback a new work that will do the actual cleanup. In order to make sure the cleanup occurs before the interface went down, flush local->workqueue on ieee80211_do_stop(). Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: add key flag for management keysJohannes Berg2-1/+33
Mark keys that might be used to receive management frames so drivers can fall back on software crypto for them if they don't support hardware offload. As the new flag is only set correctly for RX keys and the existing IEEE80211_KEY_FLAG_SW_MGMT flag can only affect TX, also rename the latter to IEEE80211_KEY_FLAG_SW_MGMT_TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSSAntonio Quartulli1-1/+32
Whenever a host gets an AUTH frame it first allocates a new station and then replies with another AUTH frame. However, if sta allocations fails the host should send a DEAUTH frame instead to tell the other end that something went wrong. Signed-off-by: Antonio Quartulli <ordex@autistici.org> [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07mac80211: move ieee80211_send_deauth_disassoc outside mlme codeAntonio Quartulli3-50/+54
Move ieee80211_send_deauth_disassoc() to util.c to make it available for the rest of the mac80211 code. Signed-off-by: Antonio Quartulli <ordex@autistici.org> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07net/mac80211/scan.c: removes unnecessary semicolonPeter Senna Tschudin1-1/+1
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: refactor set_channel_typeMichal Kazior1-19/+48
Split functionality for further reuse. Will prevent code duplication when channel context channel_type merging is introduced. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: use synchronize_net() on key destroyingEliad Peller1-1/+1
__ieee80211_key_destroy() calls synchronize_rcu() in order to sync the tx path before destroying the key. However, synching the tx path can be done with synchronize_net() as well, which is usually faster (the timing might be important for roaming scenarios). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: check power constraint IE size when parsingJohannes Berg3-10/+6
The power constraint IE is always a single byte so check the size when parsing instead of later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg3-34/+33
2012-09-06mac80211: disconnect if channel switch failsJohannes Berg2-18/+38
Disconnect from the AP if channel switching in the driver failed or if the new channel is unavailable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: don't hang on to sched_scan_iesJohannes Berg2-26/+14
There's no need to keep a copy of the scheduled scan IEs after the driver has been told, if it requires a copy it must make one. Therefore, we can move sched_scan_ies into the function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06Merge remote-tracking branch 'mac80211/master' into mac80211-nextJohannes Berg5-29/+30
Pull in mac80211.git to let the next patch apply without conflicts, also resolving a hwsim conflict. Conflicts: drivers/net/wireless/mac80211_hwsim.c Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: use list_move instead of list_del/list_addWei Yongjun1-2/+1
Using list_move() instead of list_del() + list_add(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05mac80211: Various small fixes for cfg.c: mpath_set_pinfo()LEO Airwarosu Yoichi Shinoda1-5/+4
Various small fixes for net/mac80211/cfg.c:mpath_set_pinfo(): Initialize *pinfo before filling members in, handle MESH_PATH_RESOLVED correctly, and remove bogus assignment; result in correct display of FLAGS values and meaningful EXPTIME for expired paths in iw utility. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05mac80211: don't use kerneldoc for ieee80211_add_rx_radiotap_headerJohannes Berg1-1/+1
Doing so creates warnings, but the function is internal and not part of the 802.11 docbooks, so it from kerneldoc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-04mac80211: clear bssid on auth/assoc failureEliad Peller1-0/+4
ifmgd->bssid wasn't cleared properly in some auth/assoc failure cases, causing mac80211 and the low-level driver to go out of sync. Clear ifmgd->bssid on failure, and notify the driver. Cc: stable@kernel.org # 3.4+ Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-04mac80211: Do not check for valid hw_queues for P2P_DEVICEIlan Peer1-7/+9
A P2P Device interface does not have a netdev, and is not expected to be used for transmitting data, so there is no need to assign hw queues for it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-23Merge branch 'for-john' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-08-22mac80211: Fix AP mode regressionSujith Manoharan1-1/+1
Commit mac80211: avoid using synchronize_rcu in ieee80211_set_probe_resp changed the return value when the probe response template is not present. Revert to the earlier value of 1 - this fixes AP mode for drivers like ath9k. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-22mac80211: fix DS to MBSS address translationThomas Pedersen1-22/+16
The destination address of unicast frames forwarded through a mesh gate was being replaced with the broadcast address. Instead leave the original destination address as the mesh DA. If the nexthop address is not in the mpath table it will be resolved. If that fails, the frame will be forwarded to known mesh gates. Reported-by: Cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-21Merge branch 'for-john' of ↵John W. Linville22-409/+657
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mac80211_hwsim.c
2012-08-20mac80211: clean up ieee80211_subif_start_xmitJohannes Berg1-17/+6
There's no need to carry around a return value that is always NETDEV_TX_OK anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: pass channel to ieee80211_send_probe_reqJohannes Berg4-7/+11
In multi-channel scenarios, the channel that we will transmit a probe request on isn't always the current channel (which will be NULL anyway) but will instead be the channel that the AP is on. Pass the channel to the ieee80211_send_probe_req() function so it can be used in the different scenarios. The scan code continues to pass the current channel, of course. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: convert ops checks to WARN_ONJohannes Berg1-7/+5
There's no need to BUG_ON when a driver registers invalid operations, warn and return an error. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: check operating channel in scanJohannes Berg1-5/+4
The optimisation of scanning only on the current channel should check the operating channel. Also modify it to compare channel pointer rather than the frequency. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use RX status band instead of current bandJohannes Berg1-1/+1
Even for single-channel devices it is possible that we switch the channel temporarily (e.g. for scanning) but while doing so process a received frame that was still received on the old channel, so checking the current band is racy. Use the band from status instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: don't assume channel is set in tracingJohannes Berg1-3/+6
With the move to multi-channel and away from drv_config(), hw.conf.channel will not always be set, only for devices using the current API instead of the new channel context APIs. Check the channel is set before adding its frequency to the trace data. Also break some overly long lines in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use oper_channel in rate initJohannes Berg1-1/+1
Using hw.conf.channel is wrong as it could be the temporary channel if the station is added from the workqueue while the device is already on another channel. Use oper_channel instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: remove freq/chantype from debugfsJohannes Berg1-32/+0
You can now get these values through iw, and they conflict with multi-channel work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: remove almost unused local variableJohannes Berg1-5/+2
In ieee80211_beacon_get_tim() we can use the txrc.sband instead of a separate local variable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: mesh: don't use global channel typeJohannes Berg2-8/+10
Using local->_oper_channel_type in the mesh code is completely wrong as this value is the combination of the various interface channel types and can be a different value from the mesh interface in case there are multiple virtual interfaces. Use sdata->vif.bss_conf.channel_type instead as it tracks the per-vif channel type. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: simplify buffers in aes_128_cmac_vectorJohannes Berg1-5/+1
There's no need to use a single scratch buffer and calculate offsets into it, just use two separate buffers for the separate variables. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: add IEEE80211_HW_P2P_DEV_ADDR_FOR_INTFJohannes Berg1-1/+14
Some devices like the current iwlwifi implementation require that the P2P interface address match the P2P Device address (only one P2P interface is supported.) Add the HW flag IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF that allows drivers to request that P2P Interfaces added while a P2P Device is active get the same MAC address by default. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: support P2P Device abstractionJohannes Berg10-96/+226
After cfg80211 got a P2P Device abstraction, add support to mac80211. Whether it really is supported or not will depend on whether or not the driver has support for it, but mac80211 needs to change to be able to support drivers that need a P2P Device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20cfg80211: add P2P Device abstractionJohannes Berg2-0/+5
In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: make ieee80211_beacon_connection_loss_work staticJohannes Berg2-2/+1
There's no need to declare the function in the header file since it's only used in a single place, so make it static. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: check size of channel switch IE when parsingJohannes Berg3-11/+9
The channel switch IE has a fixed size, so we can discard it in parsing if it's not the right size and use the right struct pointer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 01:48:52 +0000