summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2011-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: Add support for SMSC LAN9530, LAN9730 and LAN89530 mlx4_en: Restoring RX buffer pointer in case of failure mlx4: Sensing link type at device initialization ipv4: Fix "Set rt->rt_iif more sanely on output routes." MAINTAINERS: add entry for Xen network backend be2net: Fix suspend/resume operation be2net: Rename some struct members for clarity pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev dsa/mv88e6131: add support for mv88e6085 switch ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2) be2net: Fix a potential crash during shutdown. bna: Fix for handling firmware heartbeat failure can: mcp251x: Allow pass IRQ flags through platform data. smsc911x: fix mac_lock acquision before calling smsc911x_mac_read iwlwifi: accept EEPROM version 0x423 for iwl6000 rt2x00: fix cancelling uninitialized work rtlwifi: Fix some warnings/bugs p54usb: IDs for two new devices wl12xx: fix potential buffer overflow in testmode nvs push zd1211rw: reset rx idle timer from tasklet ...
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds7-8/+8
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-04mac80211: Fix duplicate frames on cooked monitorHelmut Schaa1-1/+1
Cleaning the ieee80211_rx_data.flags field here is wrong, instead the flags should be valid accross processing the frame on different interfaces. Fix this by removing the incorrect flags=0 assignment. Introduced in commit 554891e63a29af35cc6bb403ef34e319518114d0 (mac80211: move packet flags into packet). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-31Fix common misspellingsLucas De Marchi7-8/+8
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-28mac80211: fix aggregation frame release during timeoutDaniel Halperin1-1/+2
Suppose the aggregation reorder buffer looks like this: x-T-R1-y-R2, where x and y are frames that have not been received, T is a received frame that has timed out, and R1,R2 are received frames that have not yet timed out. The proper behavior in this scenario is to move the window past x (skipping it), release T and R1, and leave the window at y until y is received or R2 times out. As written, this code will instead leave the window at R1, because it has not yet timed out. Fix this by exiting the reorder loop only when the frame that has not timed out AND there are skipped frames earlier in the current valid window. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-28mac80211: fix possible NULL pointer dereferenceMariusz Kozlowski1-1/+2
This patch moves 'key' dereference after BUG_ON(!key) so that when key is NULL we will see proper trace instead of oops. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-28mac80211: fix NULL pointer dereference in ieee80211_key_alloc()Petr Štetiar1-2/+2
The ieee80211_key struct can be kfree()d several times in the function, for example if some of the key setup functions fails beforehand, but there's no check if the struct is still valid before we call memcpy() and INIT_LIST_HEAD() on it. In some cases (like it was in my case), if there's missing aes-generic module it could lead to the following kernel OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000018c .... PC is at memcpy+0x80/0x29c ... Backtrace: [<bf11c5e4>] (ieee80211_key_alloc+0x0/0x234 [mac80211]) from [<bf1148b4>] (ieee80211_add_key+0x70/0x12c [mac80211]) [<bf114844>] (ieee80211_add_key+0x0/0x12c [mac80211]) from [<bf070cc0>] (__cfg80211_set_encryption+0x2a8/0x464 [cfg80211]) Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-28mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS ratesFelix Fietkau1-7/+18
When a client connects in HT mode but does not provide any valid MCS rates, the function that finds the next sample rate gets stuck in an infinite loop. Fix this by falling back to legacy rates if no usable MCS rates are found. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21mac80211: initialize sta->last_rx in sta_info_allocFelix Fietkau1-0/+1
This field is used to determine the inactivity time. When in AP mode, hostapd uses it for kicking out inactive clients after a while. Without this patch, hostapd immediately deauthenticates a new client if it checks the inactivity time before the client sends its first data frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits) doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore Update cpuset info & webiste for cgroups dcdbas: force SMI to happen when expected arch/arm/Kconfig: remove one to many l's in the word. asm-generic/user.h: Fix spelling in comment drm: fix printk typo 'sracth' Remove one to many n's in a word Documentation/filesystems/romfs.txt: fixing link to genromfs drivers:scsi Change printk typo initate -> initiate serial, pch uart: Remove duplicate inclusion of linux/pci.h header fs/eventpoll.c: fix spelling mm: Fix out-of-date comments which refers non-existent functions drm: Fix printk typo 'failled' coh901318.c: Change initate to initiate. mbox-db5500.c Change initate to initiate. edac: correct i82975x error-info reported edac: correct i82975x mci initialisation edac: correct commented info fs: update comments to point correct document target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c ... Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-15Merge branch 'master' of ↵John W. Linville6-12/+168
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-03-14mac80211: fix channel type recalculation with HT and non-HT interfacesFelix Fietkau1-0/+3
When running an AP interface along with the cooked monitor interface created by hostapd, adding an interface and deleting it again triggers a channel type recalculation during which the (non-HT) monitor interface takes precedence over the HT AP interface, thus causing the channel type to be set to non-HT. Fix this by ensuring that a more wide channel type will not be overwritten by a less wide channel type. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-14mac80211: Shortcut minstrel_ht rate setup for non-MRR capable devicesHelmut Schaa1-7/+34
Devices without multi rate retry support won't be able to use all rates as specified by mintrel_ht. Hence, we can simply skip setting up further rates as the devices will only use the first one. Also add a special case for devices with only two possible tx rates. We use sample_rate -> max_prob_rate for sampling and max_tp_rate -> max_prob_rate by default. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-11mac80211: implement support for cfg80211_ops->{get,set}_ringparamJohn W. Linville3-0/+95
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-11mac80211: do not enable ps if 802.1x controlled port is unblockedJason Young2-5/+36
If dynamic_ps is disabled, enabling power save before the 4-way handshake completes may delay the station from being authorized to send/receive traffic, i.e. increase roaming times. It also may result in a failed 4-way handshake depending on the AP's timing requirements and beacon interval, and the station's listen interval. To fix this, prevent power save from being enabled while the station isn't authorized and recalculate power save whenever the station's authorized state changes. Signed-off-by: Jason Young <a.young.jason@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-11Merge branch 'master' of ↵John W. Linville6-58/+33
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-03-09mac80211: update minstrel_ht sample rate when probe is setDaniel Halperin1-10/+5
Waiting until the status is received can cause the same rate to be probed multiple times consecutively. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-07mac80211: fix scan race, simplify codeJohannes Berg1-40/+24
The scan code has a race that Michael reported he ran into, but it's easy to fix while at the same time simplifying the code. The race resulted in the following warning: ------------[ cut here ]------------ WARNING: at net/mac80211/scan.c:310 ieee80211_rx_bss_free+0x20c/0x4b8 [mac80211]() Modules linked in: [...] [<c0033edc>] (unwind_backtrace+0x0/0xe0) from [<c004f2a4>] (warn_slowpath_common+0x4c/0x64) [... backtrace wasn't useful ...] Reported-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-07mac80211: Add log message to ieee80211_restart_hw()Michael Buesch1-0/+3
Add a log message to ieee80211_restart_hw() to highlight that special codepath in the logs. This helps debugging bugs in the rarely tested restart code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-07mac80211: remove unused macrosShan Wei3-5/+0
Compile test only. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04Merge branch 'for-davem' of ↵David S. Miller12-138/+225
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-03-04Merge branch 'master' of ↵John W. Linville12-138/+225
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-03-04mac80211: Remove redundant preamble and RTS flag setup in minstrel_htHelmut Schaa1-3/+1
mac80211 does the same afterwards anyway. Hence, just drop this redundant code. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-03Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h
2011-03-01mac80211: make rate control Kconfig warning depend on mac80211Johannes Berg1-1/+1
... Otherwise it is displayed when mac80211 isn't even turned on, which is completely pointless. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-01mac80211: add support for showing the last rx bitrateFelix Fietkau3-10/+36
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: support direct offchannel TX offloadJohannes Berg5-0/+108
For devices supported by iwlwifi sometimes off-channel transmissions need to be handled by the device completely. To support this mac80211 needs to pass the frame directly to the driver and not through the TX path as the driver needs the frame and channel information at the same time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: better fix for conn_mon_timer running after disassociateStanislaw Gruszka1-6/+3
Is still possible to schedule conn_mon_timer after disassociate from ieee80211_sta_tx_notify() and ieee80211_offchannel_ps_disable(). Move disassociate check to ieee80211_sta_reset_conn_monitor() to cover all these cases, and add unlikely since in most the time we call ieee80211_sta_reset_conn_monitor() when associated. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: copy peer MCS TX parametersJohannes Berg1-1/+4
We need to copy this to allow drivers to look at the information where needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: remove IBSS merge delayJohannes Berg1-5/+0
This reverts 4a332a38 ("mac80211: Give it some time to do the TSF sync"). There's no point in waiting with a new IBSS merge just because the hardware hasn't merged up with the old IBSS yet, and since 34e8f082 we no longer attempt to merge with the IBSS we're already in. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: make tx() operation return voidJohannes Berg2-110/+58
The return value of the tx operation is commonly misused by drivers, leading to errors. All drivers will drop frames if they fail to TX the frame, and they must also properly manage the queues (if they didn't, mac80211 would already warn). Removing the ability for drivers to return a BUSY value also allows significant cleanups of the TX TX handling code in mac80211. Note that this also fixes a bug in ath9k_htc, the old "return -1" there was wrong. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi] Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23mac80211: rename RX_FLAG_TSFTJohannes Berg2-3/+3
The flag isn't very descriptive -- the intention is that the driver provides a TSF timestamp at the beginning of the MPDU -- make that clearer by renaming the flag to RX_FLAG_MACTIME_MPDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23mac80211: Fix a race on enabling power save.Vivek Natarajan2-3/+13
There is a race on sending a data frame before the tx completion of nullfunc frame for enabling power save. As the data quickly follows the nullfunc frame, the AP thinks that the station is out of power save and continues to send the frames. Whereas in the station, the nullfunc ack will be processed after the tx completion of data frame and mac80211 goes to powersave. Thus the power save state mismatch between the station and the AP causes some data loss and some applications fail because of that. This patch fixes this issue. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-22Merge branch 'master' of ↵John W. Linville12-43/+113
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-02-22Merge branch 'master' of ↵David S. Miller1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-20net: Fix more stale on-stack list_head objects.Eric W. Biederman1-0/+1
From: Eric W. Biederman <ebiederm@xmission.com> In the beginning with batching unreg_list was a list that was used only once in the lifetime of a network device (I think). Now we have calls using the unreg_list that can happen multiple times in the life of a network device like dev_deactivate and dev_close that are also using the unreg_list. In addition in unregister_netdevice_queue we also do a list_move because for devices like veth pairs it is possible that unregister_netdevice_queue will be called multiple times. So I think the change below to fix dev_deactivate which Eric D. missed will fix this problem. Now to go test that. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-19Merge branch 'master' of ↵David S. Miller1-0/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/e1000e/netdev.c net/xfrm/xfrm_policy.c
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville6-3/+18
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-18mac80211: Clear PS related flag on disabling power save.Vivek Natarajan1-0/+1
Clear IEEE80211_STA_NULLFUNC_ACKED flag on disabling power save. Without this fix, there is a chance of setting CONF_PS before sending nullfunc frame. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18small adjustment to net/mac80211/KconfigJan Beulich1-1/+1
"def_bool n" without prompt is pointless, this should be just "bool". Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: fix 2.4 GHz 40 MHz disablingJohannes Berg4-15/+13
The module parameter ieee80211_disable_40mhz_24ghz was meant to allow disabling 40 MHz operation in the 2.4 GHz band by default. However, it is buggy as implemented because while it advertises to the AP that the device doesn't support 40 MHz, it will itself still use 40 MHz configurations. To fix this, clear the 40 MHz bits from the sband completely instead of overriding where used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: Add power to debugfs.Ben Greear1-0/+6
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: fix conn_mon_timer running after disassociateStanislaw Gruszka1-0/+6
Low level driver could pass rx frames to us after disassociate, what can lead to run conn_mon_timer by ieee80211_sta_rx_notify(). That is obviously wrong, but nothing happens until we unload modules and resources are used after free. If kernel debugging is enabled following warning could be observed: WARNING: at lib/debugobjects.c:259 debug_print_object+0x65/0x70() Hardware name: HP xw8600 Workstation ODEBUG: free active (active state 0) object type: timer_list Modules linked in: iwlagn(-) iwlcore mac80211 cfg80211 aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi arc4 microcode serio_raw ecb tg3 shpchp rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas ahci libahci pata_acpi ata_generic ata_piix floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: cfg80211] Pid: 13827, comm: rmmod Tainted: G W 2.6.38-rc4-wl+ #22 Call Trace: [<ffffffff810649cf>] ? warn_slowpath_common+0x7f/0xc0 [<ffffffff81064ac6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff81226fc5>] ? debug_print_object+0x65/0x70 [<ffffffff81227625>] ? debug_check_no_obj_freed+0x125/0x210 [<ffffffff8109ebd7>] ? debug_check_no_locks_freed+0xf7/0x170 [<ffffffff81156092>] ? kfree+0xc2/0x2f0 [<ffffffff813ec5c5>] ? netdev_release+0x45/0x60 [<ffffffff812f1067>] ? device_release+0x27/0xa0 [<ffffffff81216ddd>] ? kobject_release+0x8d/0x1a0 [<ffffffff81216d50>] ? kobject_release+0x0/0x1a0 [<ffffffff812183b7>] ? kref_put+0x37/0x70 [<ffffffff81216c57>] ? kobject_put+0x27/0x60 [<ffffffff813d5d1b>] ? netdev_run_todo+0x1ab/0x270 [<ffffffff813e771e>] ? rtnl_unlock+0xe/0x10 [<ffffffffa0581188>] ? ieee80211_unregister_hw+0x58/0x120 [mac80211] [<ffffffffa0377ed7>] ? iwl_pci_remove+0xdb/0x22a [iwlagn] [<ffffffff8123cde2>] ? pci_device_remove+0x52/0x120 [<ffffffff812f5205>] ? __device_release_driver+0x75/0xe0 [<ffffffff812f5348>] ? driver_detach+0xd8/0xe0 [<ffffffff812f4111>] ? bus_remove_driver+0x91/0x100 [<ffffffff812f5b62>] ? driver_unregister+0x62/0xa0 [<ffffffff8123d194>] ? pci_unregister_driver+0x44/0xa0 [<ffffffffa0377df5>] ? iwl_exit+0x15/0x1c [iwlagn] [<ffffffff810ab492>] ? sys_delete_module+0x1a2/0x270 [<ffffffff81498889>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8100bf42>] ? system_call_fastpath+0x16/0x1b Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-15Merge branch 'master' into for-nextJiri Kosina7-16/+29
2011-02-14mac80211: reply to directed probes in IBSSJohannes Berg1-5/+6
WFA certification and the WMM spec require that we always reply to unicast probe requests, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14Merge branch 'master' of ↵David S. Miller1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-14mac80211: Remove superfluous if clauseHelmut Schaa1-11/+1
ieee80211_rx_h_check returned RX_DROP_MONITOR in case the if statement in question was true but the same return value is also used directly after the if clause. Hence, we can just drop the whole if clause and as such simplify the code. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09mac80211: Ensure power-level set properly for scanning.Ben Greear2-2/+10
My previous patch to optimize scanning on operating channel accidentally removed the code that would ensure power was set to maximum for scanning. This patch re-adds that functionality. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09mac80211: Allow work items to use existing channel type.Ben Greear1-3/+50
Narrow channel types can function within larger channel types. So, use existing channel type for work items when possible. This decreases hardware channel changes significantly when using non NO_HT channel types on the operating channel. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09mac80211: Allow scanning on existing channel-type.Ben Greear2-6/+16
Previous code set the channel type to NO_HT, but it appears that NO_HT packets can be sent on any channel type, so we do not need to change the channel type as long as the channel is correct. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 21:55:10 +0000