summaryrefslogtreecommitdiff
path: root/net/ipv6/route.c
AgeCommit message (Collapse)AuthorFilesLines
2012-03-16ipv6: fix icmp6_dst_alloc()Eric Dumazet1-1/+1
commit 87a115783 ( ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().) forgot to convert one error path, leading to crashes in mld_sendpack() Many thanks to Dave Jones for providing a very complete bug report. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13ipv6: release idev when ip6_neigh_lookup failed in icmp6_dst_allocRongQing.Li1-0/+1
release idev when ip6_neigh_lookup failed in icmp6_dst_alloc Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30IPv6: Avoid taking write lock for /proc/net/ipv6_routeJosh Hunt1-1/+1
During some debugging I needed to look into how /proc/net/ipv6_route operated and in my digging I found its calling fib6_clean_all() which uses "write_lock_bh(&table->tb6_lock)" before doing the walk of the table. I found this on 2.6.32, but reading the code I believe the same basic idea exists currently. Looking at the rtnetlink code they are only calling "read_lock_bh(&table->tb6_lock);" via fib6_dump_table(). While I realize reading from proc isn't the recommended way of fetching the ipv6 route table; taking a write lock seems unnecessary and would probably cause network performance issues. To verify this I loaded up the ipv6 route table and then ran iperf in 3 cases: * doing nothing * reading ipv6 route table via proc (while :; do cat /proc/net/ipv6_route > /dev/null; done) * reading ipv6 route table via rtnetlink (while :; do ip -6 route show table all > /dev/null; done) * Load the ipv6 route table up with: * for ((i = 0;i < 4000;i++)); do ip route add unreachable 2000::$i; done * iperf commands: * client: iperf -i 1 -V -c <ipv6 addr> * server: iperf -V -s * iperf results - 3 runs each (in Mbits/sec) * nothing: client: 927,927,927 server: 927,927,927 * proc: client: 179,97,96,113 server: 142,112,133 * iproute: client: 928,927,928 server: 927,927,927 lock_stat shows taking the write lock is causing the slowdown. Using this info I decided to write a version of fib6_clean_all() which replaces write_lock_bh(&table->tb6_lock) with read_lock_bh(&table->tb6_lock). With this new function I see the same results as with my rtnetlink iperf test. Signed-off-by: Josh Hunt <joshhunt00@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-29ipv6: Fix neigh lookup using NULL device.David S. Miller1-7/+10
In some of the rt6_bind_neighbour() call sites, it hasn't hooked up the rt->dst.dev pointer yet, so we'd deref a NULL pointer when obtaining dev->ifindex for the neighbour hash function computation. Just pass the netdevice explicitly in to fix this problem. Reported-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-29ipv6: Report TCP timetstamp info in cacheinfo just like ipv4 does.David S. Miller1-1/+10
I missed this while adding ipv6 support to inet_peer. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-28ipv6: Kill rt6i_dev and rt6i_expires defines.David S. Miller1-29/+29
It just obscures that the netdevice pointer and the expires value are implemented in the dst_entry sub-object of the ipv6 route. And it makes grepping for dst_entry member uses much harder too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-28ipv6: Create fast inline ipv6 neigh lookup just like ipv4.David S. Miller1-19/+22
Also, create and use an rt6_bind_neighbour() in net/ipv6/route.c to consolidate some common logic. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-26ipv6: Kill useless route tracing bits in net/ipv6/route.cDavid S. Miller1-20/+2
RDBG() wasn't even used, and the messages printed by RT6_DEBUG() were far from useful. Just get rid of all this stuff, we can replace it with something more suitable if we want. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-25Merge branch 'nf-next' of git://1984.lsi.us.es/net-nextDavid S. Miller1-0/+7
2011-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/freescale/fsl_pq_mdio.c net/batman-adv/translation-table.c net/ipv6/route.c
2011-12-13ipv6: Check dest prefix length on original route not copied one in ↵David S. Miller1-1/+1
rt6_alloc_cow(). After commit 8e2ec639173f325977818c45011ee176ef2b11f6 ("ipv6: don't use inetpeer to store metrics for routes.") the test in rt6_alloc_cow() for setting the ANYCAST flag is now wrong. 'rt' will always now have a plen of 128, because it is set explicitly to 128 by ip6_rt_copy. So to restore the semantics of the test, check the destination prefix length of 'ort'. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13ipv6: If neigh lookup fails during icmp6 dst allocation, propagate error.David S. Miller1-2/+4
Don't just succeed with a route that has a NULL neighbour attached. This follows the behavior of addrconf_dst_alloc(). Allowing this kind of route to end up with a NULL neigh attached will result in packet drops on output until the route is somehow invalidated, since nothing will meanwhile try to lookup the neigh again. A statistic is bumped for the case where we see a neigh-less route on output, but the resulting packet drop is otherwise silent in nature, and frankly it's a hard error for this to happen and ipv6 should do what ipv4 does which is say something in the kernel logs. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().David S. Miller1-4/+8
And return error pointers. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06ipv6: Make third arg to anycast_dst_alloc() bool.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.David Miller1-8/+8
To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Roland Dreier <roland@purestorage.com>
2011-12-04ipv6: add ip6_route_lookupFlorian Westphal1-0/+7
like rt6_lookup, but allows caller to pass in flowi6 structure. Will be used by the upcoming ipv6 netfilter reverse path filter match. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-12-03ipv6: Kill ndisc_get_neigh() inline helper.David S. Miller1-3/+4
It's only used in net/ipv6/route.c and the NULL device check is superfluous for all of the existing call sites. Just expand the __ndisc_lookup_errno() call at each location. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03ipv6: Various cleanups in route.cDavid S. Miller1-47/+48
1) x == NULL --> !x 2) x != NULL --> x 3) (x&BIT) --> (x & BIT) 4) (BIT1|BIT2) --> (BIT1 | BIT2) 5) proper argument and struct member alignment Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+14
Conflicts: net/ipv4/inet_diag.c
2011-11-26net: Move mtu handling down to the protocol depended handlersSteffen Klassert1-2/+9
We move all mtu handling from dst_mtu() down to the protocol layer. So each protocol can implement the mtu handling in a different manner. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26net: Rename the dst_opt default_mtu method to mtuSteffen Klassert1-5/+5
We plan to invoke the dst_opt->default_mtu() method unconditioally from dst_mtu(). So rename the method to dst_opt->mtu() to match the name with the new meaning. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26route: Use the device mtu as the default for blackhole routesSteffen Klassert1-1/+1
As it is, we return null as the default mtu of blackhole routes. This may lead to a propagation of a bogus pmtu if the default_mtu method of a blackhole route is invoked. So return dst->dev->mtu as the default mtu instead. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan1-21/+21
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14IPv6 routing, NLM_F_* flag support: warn if new route is created without ↵Matti Vaittinen1-2/+11
NLM_F_CREATE The support for NLM_F_* flags at IPv6 routing requests. Warn if NLM_F_CREATE flag is not defined for RTM_NEWROUTE request, creating new table. Later NLM_F_CREATE may be required for new route creation. Patch created against linux-3.2-rc1 Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker1-0/+1
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28ipv6: fix route error binding peer in func icmp6_dst_allocGao feng1-2/+1
in func icmp6_dst_alloc,dst_metric_set call ipv6_cow_metrics to set metric. ipv6_cow_metrics may will call rt6_bind_peer to set rt6_info->rt6i_peer. So,we should move ipv6_addr_copy before dst_metric_set to make sure rt6_bind_peer success. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27ipv6: check return value for dst_allocMadalin Bucur1-1/+3
return value of dst_alloc must be checked before use Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-17ipv6: don't use inetpeer to store metrics for routes.Yan, Zheng1-11/+22
Current IPv6 implementation uses inetpeer to store metrics for routes. The problem of inetpeer is that it doesn't take subnet prefix length in to consideration. If two routes have the same address but different prefix length, they share same inetpeer. So changing metrics of one route also affects the other. The fix is to allocate separate metrics storage for each route. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03net: fix NULL dereferences in check_peer_redir()Eric Dumazet1-10/+25
Gergely Kalman reported crashes in check_peer_redir(). It appears commit f39925dbde778 (ipv4: Cache learned redirect information in inetpeer.) added a race, leading to possible NULL ptr dereference. Since we can now change dst neighbour, we should make sure a reader can safely use a neighbour. Add RCU protection to dst neighbour, and make sure check_peer_redir() can be called safely by different cpus in parallel. As neighbours are already freed after one RCU grace period, this patch should not add typical RCU penalty (cache cold effects) Many thanks to Gergely for providing a pretty report pointing to the bug. Reported-by: Gergely Kalman <synapse@hippy.csoma.elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21ipv6: unshare inetpeersEric Dumazet1-13/+20
We currently cow metrics a bit too soon in IPv6 case : All routes are tied to a single inetpeer entry. Change ip6_rt_copy() to get destination address as second argument, so that we fill rt6i_dst before the dst_copy_metrics() call. icmp6_dst_alloc() must set rt6i_dst before calling dst_metric_set(), or else the cow is done while rt6i_dst is still NULL. If orig route points to readonly metrics, we can share the pointer instead of performing the memory allocation and copy. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18net: Add ->neigh_lookup() operation to dst_opsDavid S. Miller1-0/+7
In the future dst entries will be neigh-less. In that environment we need to have an easy transition point for current users of dst->neighbour outside of the packet output fast path. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-17net: Abstract dst->neighbour accesses behind helpers.David S. Miller1-19/+20
dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-17ipv6: Get rid of rt6i_nexthop macro.David S. Miller1-15/+15
It just makes it harder to see 1) what the code is doing and 2) grep for all users of dst{->,.}neighbour Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05Merge branch 'master' of ↵David S. Miller1-16/+9
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-01ipv6: Don't put artificial limit on routing table size.David S. Miller1-6/+7
IPV6, unlike IPV4, doesn't have a routing cache. Routing table entries, as well as clones made in response to route lookup requests, all live in the same table. And all of these things are together collected in the destination cache table for ipv6. This means that routing table entries count against the garbage collection limits, even though such entries cannot ever be reclaimed and are added explicitly by the administrator (rather than being created in response to lookups). Therefore it makes no sense to count ipv6 routing table entries against the GC limits. Add a DST_NOCOUNT destination cache entry flag, and skip the counting if it is set. Use this flag bit in ipv6 when adding routing table entries. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01ipv6: Don't change dst->flags using assignments.David S. Miller1-10/+2
This blows away any flags already set in the entry. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09rtnetlink: Compute and store minimum ifinfo dump sizeGreg Rose1-3/+3
The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-21ipv6: copy prefsrc setting when copying route entryFlorian Westphal1-0/+1
commit c3968a857a6b6c3d2ef4ead35776b055fb664d74 ('ipv6: RTA_PREFSRC support for ipv6 route source address selection') added support for ipv6 prefsrc as an alternative to ipv6 addrlabels, but it did not work because the prefsrc entry was not copied. Cc: Daniel Walter <sahne@0x90.at> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: Use non-zero allocations in dst_alloc().David S. Miller1-1/+7
Make dst_alloc() and it's users explicitly initialize the entire entry. The zero'ing done by kmem_cache_zalloc() was almost entirely redundant. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: Make dst_alloc() take more explicit initializations.David S. Miller1-18/+11
Now the dst->dev, dev->obsolete, and dst->flags values can be specified as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26Merge branch 'master' of ↵David S. Miller1-1/+7
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Resolved logic conflicts causing a build failure due to drivers/net/r8169.c changes using a patch from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25net: provide cow_metrics() methods to blackhole dst_opsHeld Bernhard1-0/+7
Since commit 62fa8a846d7d (net: Implement read-only protection and COW'ing of metrics.) the kernel throws an oops. [ 101.620985] BUG: unable to handle kernel NULL pointer dereference at (null) [ 101.621050] IP: [< (null)>] (null) [ 101.621084] PGD 6e53c067 PUD 3dd6a067 PMD 0 [ 101.621122] Oops: 0010 [#1] SMP [ 101.621153] last sysfs file: /sys/devices/virtual/ppp/ppp/uevent [ 101.621192] CPU 2 [ 101.621206] Modules linked in: l2tp_ppp pppox ppp_generic slhc l2tp_netlink l2tp_core deflate zlib_deflate twofish_x86_64 twofish_common des_generic cbc ecb sha1_generic hmac af_key iptable_filter snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device loop snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm snd_timer snd i2c_i801 iTCO_wdt psmouse soundcore snd_page_alloc evdev uhci_hcd ehci_hcd thermal [ 101.621552] [ 101.621567] Pid: 5129, comm: openl2tpd Not tainted 2.6.39-rc4-Quad #3 Gigabyte Technology Co., Ltd. G33-DS3R/G33-DS3R [ 101.621637] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 101.621684] RSP: 0018:ffff88003ddeba60 EFLAGS: 00010202 [ 101.621716] RAX: ffff88003ddb5600 RBX: ffff88003ddb5600 RCX: 0000000000000020 [ 101.621758] RDX: ffffffff81a69a00 RSI: ffffffff81b7ee61 RDI: ffff88003ddb5600 [ 101.621800] RBP: ffff8800537cd900 R08: 0000000000000000 R09: ffff88003ddb5600 [ 101.621840] R10: 0000000000000005 R11: 0000000000014b38 R12: ffff88003ddb5600 [ 101.621881] R13: ffffffff81b7e480 R14: ffffffff81b7e8b8 R15: ffff88003ddebad8 [ 101.621924] FS: 00007f06e4182700(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 [ 101.621971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.622005] CR2: 0000000000000000 CR3: 0000000045274000 CR4: 00000000000006e0 [ 101.622046] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 101.622087] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 101.622129] Process openl2tpd (pid: 5129, threadinfo ffff88003ddea000, task ffff88003de9a280) [ 101.622177] Stack: [ 101.622191] ffffffff81447efa ffff88007d3ded80 ffff88003de9a280 ffff88007d3ded80 [ 101.622245] 0000000000000001 ffff88003ddebbb8 ffffffff8148d5a7 0000000000000212 [ 101.622299] ffff88003dcea000 ffff88003dcea188 ffffffff00000001 ffffffff81b7e480 [ 101.622353] Call Trace: [ 101.622374] [<ffffffff81447efa>] ? ipv4_blackhole_route+0x1ba/0x210 [ 101.622415] [<ffffffff8148d5a7>] ? xfrm_lookup+0x417/0x510 [ 101.622450] [<ffffffff8127672a>] ? extract_buf+0x9a/0x140 [ 101.622485] [<ffffffff8144c6a0>] ? __ip_flush_pending_frames+0x70/0x70 [ 101.622526] [<ffffffff8146fbbf>] ? udp_sendmsg+0x62f/0x810 [ 101.622562] [<ffffffff813f98a6>] ? sock_sendmsg+0x116/0x130 [ 101.622599] [<ffffffff8109df58>] ? find_get_page+0x18/0x90 [ 101.622633] [<ffffffff8109fd6a>] ? filemap_fault+0x12a/0x4b0 [ 101.622668] [<ffffffff813fb5c4>] ? move_addr_to_kernel+0x64/0x90 [ 101.622706] [<ffffffff81405d5a>] ? verify_iovec+0x7a/0xf0 [ 101.622739] [<ffffffff813fc772>] ? sys_sendmsg+0x292/0x420 [ 101.622774] [<ffffffff810b994a>] ? handle_pte_fault+0x8a/0x7c0 [ 101.622810] [<ffffffff810b76fe>] ? __pte_alloc+0xae/0x130 [ 101.622844] [<ffffffff810ba2f8>] ? handle_mm_fault+0x138/0x380 [ 101.622880] [<ffffffff81024af9>] ? do_page_fault+0x189/0x410 [ 101.622915] [<ffffffff813fbe03>] ? sys_getsockname+0xf3/0x110 [ 101.622952] [<ffffffff81450c4d>] ? ip_setsockopt+0x4d/0xa0 [ 101.622986] [<ffffffff813f9932>] ? sockfd_lookup_light+0x22/0x90 [ 101.623024] [<ffffffff814b61fb>] ? system_call_fastpath+0x16/0x1b [ 101.623060] Code: Bad RIP value. [ 101.623090] RIP [< (null)>] (null) [ 101.623125] RSP <ffff88003ddeba60> [ 101.623146] CR2: 0000000000000000 [ 101.650871] ---[ end trace ca3856a7d8e8dad4 ]--- [ 101.651011] __sk_free: optmem leakage (160 bytes) detected. The oops happens in dst_metrics_write_ptr() include/net/dst.h:124: return dst->ops->cow_metrics(dst, p); dst->ops->cow_metrics is NULL and causes the oops. Provide cow_metrics() methods, like we did in commit 214f45c91bb (net: provide default_advmss() methods to blackhole dst_ops) Signed-off-by: Held Bernhard <berny156@gmx.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet1-26/+26
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21ipv6: Remove hoplimit initialization to -1Thomas Egerer1-1/+0
The changes introduced with git-commit a02e4b7d ("ipv6: Demark default hoplimit as zero.") missed to remove the hoplimit initialization. As a result, ipv6_get_mtu interprets the return value of dst_metric_raw (-1) as 255 and answers ping6 with this hoplimit. This patche removes the line such that ping6 is answered with the hoplimit value configured via sysctl. Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-15ipv6: RTA_PREFSRC support for ipv6 route source address selectionDaniel Walter1-3/+69
[ipv6] Add support for RTA_PREFSRC This patch allows a user to select the preferred source address for a specific IPv6-Route. It can be set via a netlink message setting RTA_PREFSRC to a valid IPv6 address which must be up on the device the route will be bound to. Signed-off-by: Daniel Walter <dwalter@barracuda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22ipv6: ip6_route_output does not modify sk parameter, so make it constFlorian Westphal1-1/+1
This avoids explicit cast to avoid 'discards qualifiers' compiler warning in a netfilter patch that i've been working on. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12ipv6: Convert to use flowi6 where applicable.David S. Miller1-48/+48
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Put flowi_* prefix on AF independent members of struct flowiDavid S. Miller1-10/+10
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10Merge branch 'master' of ↵David S. Miller1-1/+3
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_cmn.c
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 01:45:57 +0000