summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2017-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds18-132/+186
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
2017-07-01Merge branch 'for-upstream' of ↵David S. Miller7-35/+47
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-07-01 Here are some more Bluetooth patches for the 4.13 kernel: - Added support for Broadcom BCM43430 controllers - Added sockaddr length checks before accessing sa_family - Fixed possible "might sleep" errors in bnep, cmtp and hidp modules - A few other minor fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_refcnt from atomic_t to refcount_tReshetova, Elena2-2/+2
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This patch uses refcount_inc_not_zero() instead of atomic_inc_not_zero_hint() due to absense of a _hint() version of refcount API. If the hint() version must be used, we might need to revisit API. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29Bluetooth: Add sockaddr length checks before accessing sa_family in bind and ↵Mateusz Jurczyk3-7/+7
connect handlers Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() and connect() handlers of the Bluetooth sockets. Since neither syscall enforces a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing sa_family. Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-29bluetooth: remove WQ_MEM_RECLAIM from hci workqueuesTejun Heo1-4/+3
Bluetooth hci uses ordered HIGHPRI, MEM_RECLAIM workqueues. It's likely that the flags came from mechanical conversion from create_singlethread_workqueue(). Bluetooth shouldn't be depended upon for memory reclaim and the spurious MEM_RECLAIM flag can trigger the following warning. Remove WQ_MEM_RECLAIM and convert to alloc_ordered_workqueue() while at it. workqueue: WQ_MEM_RECLAIM hci0:hci_power_off is flushing !WQ_MEM_RECLAIM events:btusb_work ------------[ cut here ]------------ WARNING: CPU: 2 PID: 14231 at /home/brodo/local/kernel/git/linux/kernel/workqueue.c:2423 check_flush_dependency+0xb3/0x100 Modules linked in: CPU: 2 PID: 14231 Comm: kworker/u9:4 Not tainted 4.12.0-rc6+ #3 Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS A11 12/08/2016 Workqueue: hci0 hci_power_off task: ffff9432dad58000 task.stack: ffff986d43790000 RIP: 0010:check_flush_dependency+0xb3/0x100 RSP: 0018:ffff986d43793c90 EFLAGS: 00010086 RAX: 000000000000005a RBX: ffff943316810820 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000096 RDI: 0000000000000001 RBP: ffff986d43793cb0 R08: 0000000000000775 R09: ffffffff85bdd5c0 R10: 0000000000000040 R11: 0000000000000000 R12: ffffffff84d596e0 R13: ffff9432dad58000 R14: ffff94321c640320 R15: ffff9432dad58000 FS: 0000000000000000(0000) GS:ffff94331f500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007b8bca242000 CR3: 000000014f60a000 CR4: 00000000003406e0 Call Trace: flush_work+0x8a/0x1c0 ? flush_work+0x184/0x1c0 ? skb_free_head+0x21/0x30 __cancel_work_timer+0x124/0x1b0 ? hci_dev_do_close+0x2a4/0x4d0 cancel_work_sync+0x10/0x20 btusb_close+0x23/0x100 hci_dev_do_close+0x2ca/0x4d0 hci_power_off+0x1e/0x50 process_one_work+0x184/0x3e0 worker_thread+0x4a/0x3a0 ? preempt_count_sub+0x9b/0x100 ? preempt_count_sub+0x9b/0x100 kthread+0x125/0x140 ? process_one_work+0x3e0/0x3e0 ? __kthread_create_on_node+0x1a0/0x1a0 ? do_syscall_64+0x58/0xd0 ret_from_fork+0x27/0x40 Code: 00 75 bf 49 8b 56 18 48 8d 8b b0 00 00 00 48 81 c6 b0 00 00 00 4d 89 e0 48 c7 c7 20 23 6b 85 c6 05 83 cd 31 01 01 e8 bf c4 0c 00 <0f> ff eb 93 80 3d 74 cd 31 01 00 75 a5 65 48 8b 04 25 00 c5 00 ---[ end trace b88fd2f77754bfec ]--- Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-27Bluetooth: hidp: fix possible might sleep error in hidp_session_threadJeffy Chen1-11/+22
It looks like hidp_session_thread has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Tested-by: AL Yu-Chen Cho <acho@suse.com> Tested-by: Rohit Vaswani <rvaswani@nvidia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-27Bluetooth: cmtp: fix possible might sleep error in cmtp_sessionJeffy Chen1-7/+10
It looks like cmtp_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: AL Yu-Chen Cho <acho@suse.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-27Bluetooth: bnep: fix possible might sleep error in bnep_sessionJeffy Chen1-6/+5
It looks like bnep_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: AL Yu-Chen Cho <acho@suse.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-20net: introduce __skb_put_[zero, data, u8]yuan linyu2-15/+12
follow Johannes Berg, semantic patch file as below, @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = __skb_put(skb, len); +p = __skb_put_zero(skb, len); | -p = (t)__skb_put(skb, len); +p = __skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ identifier p; expression len; expression skb; type t; @@ ( -t p = __skb_put(skb, len); +t p = __skb_put_zero(skb, len); ) ... when != p ( -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = __skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); | -p = (t *)__skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(__skb_put(skb, len), 0, len); +__skb_put_zero(skb, len); @@ expression skb, len, data; @@ -memcpy(__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ expression SKB, C, S; typedef u8; identifier fn = {__skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar3-3/+3
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-16networking: add and use skb_put_u8()Johannes Berg2-2/+2
Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg3-9/+9
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_pull & friends return void pointersJohannes Berg1-2/+2
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg6-21/+21
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg8-13/+13
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12Bluetooth: Send HCI Set Event Mask Page 2 command only when neededMarcel Holtmann1-2/+15
The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
2017-06-10Bluetooth: use constant time memory comparison for secret valuesJason A. Donenfeld1-19/+20
This file is filled with complex cryptography. Thus, the comparisons of MACs and secret keys and curve points and so forth should not add timing attacks, which could either result in a direct forgery, or, given the complexity, some other type of attack. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller1-1/+1
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22Bluetooth: Delete error messages for failed memory allocations in two functionsMarkus Elfring1-8/+3
Omit two extra messages for memory allocation failures in these functions. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-18Bluetooth: Skip vendor diagnostic configuration for HCI User ChannelMarcel Holtmann1-5/+6
When the HCI User Channel access is requested, then do not try to undermine it with vendor diagnostic configuration. The exclusive user is required to configure its own vendor diagnostic in that case and can not rely on the host stack support. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Set LE Default PHY preferencesMarcel Holtmann1-0/+12
If the LE Set Default PHY command is supported, the indicate to the controller that the host has no preferences for transmitter PHY or receiver PHY selection. Issuing this command gives the controller a clear indication that other PHY can be selected if available. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Enable LE PHY Update Complete eventMarcel Holtmann1-0/+6
If either LE Set Default PHY command or LE Set PHY commands is supported, then enable the LE PHY Update Complete event. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Enable LE Channel Selection Algorithm eventMarcel Holtmann1-0/+8
If the Channel Selection Algorithm #2 feature is supported, then enable the new LE Channel Selection Algorithm event. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Set LE Suggested Default Data Length to maximumMarcel Holtmann1-0/+9
When LE Data Packet Length Extension is supported, then actually increase the suggested default data length to the maximum to enable higher througput. < HCI Command: LE Read Maximum Data Length (0x08|0x002f) plen 0 > HCI Event: Command Complete (0x0e) plen 12 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 2120 Max RX octets: 251 Max RX time: 2120 < HCI Command: LE Read Suggested Default Data Length (0x08|0x0023) plen 0 > HCI Event: Command Complete (0x0e) plen 8 LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1 Status: Success (0x00) TX octets: 27 TX time: 328 < HCI Command: LE Write Suggested Default Data Length (0x08|0x0024) plen 4 TX octets: 251 TX time: 2120 > HCI Event: Command Complete (0x0e) plen 4 LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1 Status: Success (0x00) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-16net: socket: mark socket protocol handler structs as constlinzhang1-1/+1
Signed-off-by: linzhang <xiaolou4617@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30Bluetooth: Add selftest for ECDH key generationMarcel Holtmann2-3/+38
Since the ECDH key generation takes a different path, it needs to be tested as well. For this generate the public debug key from the private debug key and compare both. This also moves the seeding of the private key into the SMP calling code to allow for easier re-use of the ECDH key generation helper. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-30Bluetooth: zero kpp input for key generationMarcel Holtmann1-0/+1
When generating new ECDH keys with kpp, the shared secret input needs to be set to NULL. Fix this by including kpp_request_set_input call. Fixes: 58771c1c ("Bluetooth: convert smp and selftest to crypto kpp API") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-30Bluetooth: Fix user channel for 32bit userspace on 64bit kernelSzymon Janc1-1/+2
Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marko Kiiskila <marko@runtime.io> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2017-04-30Bluetooth: allocate data for kpp on heapSalvatore Benedetto2-11/+33
Bluetooth would crash when computing ECDH keys with kpp if VMAP_STACK is enabled. Fix by allocating data passed to kpp on heap. Fixes: 58771c1c ("Bluetooth: convert smp and selftest to crypto kpp API") Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-25Bluetooth: convert smp and selftest to crypto kpp APISalvatore Benedetto8-878/+259
* Convert both smp and selftest to crypto kpp API * Remove module ecc as no more required * Add ecdh_helper functions for wrapping kpp async calls This patch has been tested *only* with selftest, which is called on module loading. Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12bluetooth: Do not set IFF_POINTOPOINTPatrik Flykt1-2/+1
The IPv6 stack needs to send and receive Neighbor Discovery messages. Remove the IFF_POINTOPOINT flag. Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: 6lowpan: Set tx_queue_len to DEFAULT_TX_QUEUE_LENLuiz Augusto von Dentz1-0/+2
Make netdev queue packets if we run out of credits. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: L2CAP: Add l2cap_le_flowctl_sendLuiz Augusto von Dentz1-8/+19
Consolidate code sending data to LE CoC channels and adds proper accounting of packets sent, the remaining credits and how many packets are queued. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: 6lowpan: Use netif APIs to flow controlLuiz Augusto von Dentz1-0/+16
Rely on netif_wake_queue and netif_stop_queue to flow control when transmit resources are unavailable. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: 6lowpan: Don't drop packets when run out of creditsLuiz Augusto von Dentz1-9/+2
Since l2cap_chan_send will now queue the packets there is no point in checking the credits anymore. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: L2CAP: Don't return -EAGAIN if out of creditsLuiz Augusto von Dentz1-3/+0
Just keep queueing them into TX queue since the caller might just have to do the same and there is no impact in adding another packet to the TX queue even if there aren't any credits to transmit them. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: 6lowpan: Print errors during recv_pktLuiz Augusto von Dentz1-0/+2
This makes should make it more clear why a packet is being dropped. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: 6lowpan: Remove unnecessary peer lookupLuiz Augusto von Dentz1-11/+4
During chan_recv_cb there is already a peer lookup which can be passed to recv_pkt directly instead of the channel. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: 6lowpan: fix use after free in chan_suspend/resumeMichael Scott1-18/+3
A status field in the skb_cb struct was storing a channel status based on channel suspend/resume events. This stored status was then used to return EAGAIN if there were packet sending issues in snd_pkt(). The issue is that the skb has been freed by the time the callback to 6lowpan's suspend/resume was called. So, this generates a "use after free" issue that was noticed while running kernel tests with KASAN debug enabled. Let's eliminate the status field entirely as we can use the channel tx_credits to indicate whether we should return EAGAIN when handling packets. Signed-off-by: Michael Scott <michael.scott@linaro.org> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: 6lowpan: fix delay work init in add_peer_chan()Michael Scott1-3/+7
When adding 6lowpan devices very rapidly we sometimes see a crash: [23122.306615] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-43-arm64 #1 Debian 4.9.9.linaro.43-1 [23122.315400] Hardware name: HiKey Development Board (DT) [23122.320623] task: ffff800075443080 task.stack: ffff800075484000 [23122.326551] PC is at expire_timers+0x70/0x150 [23122.330907] LR is at run_timer_softirq+0xa0/0x1a0 [23122.335616] pc : [<ffff000008142dd8>] lr : [<ffff000008142f58>] pstate: 600001c5 This was due to add_peer_chan() unconditionally initializing the lowpan_btle_dev->notify_peers delayed work structure, even if the lowpan_btle_dev passed into add_peer_chan() had previously been initialized. Normally, this would go unnoticed as the delayed work timer is set for 100 msec, however when calling add_peer_chan() faster than 100 msec it clears out a previously queued delay work causing the crash above. To fix this, let add_peer_chan() know when a new lowpan_btle_dev is passed in so that it only performs the delay work initialization when needed. Signed-off-by: Michael Scott <michael.scott@linaro.org> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-126lowpan: fix assignment of peer_addrColin Ian King1-1/+1
The data from peer->chan->dst is not being copied to peer_addr, the current code just updates the pointer and not the contents of what it points to. Fix this with the intended assignment. Detected by CoverityScan, CID#1422111 ("Parse warning (PW.PARAM_SET_BUT_NOT_USED)") Fixes: fb6f2f606ce8 ("6lowpan: Fix IID format for Bluetooth") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: Change initial min and max intervalJonas Holmberg1-2/+2
Use the initial connection interval recommended in Bluetooth Specification v4.2 (30ms - 50ms). Signed-off-by: Jonas Holmberg <jonashg@axis.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: fix assignments on error variable errColin Ian King1-5/+5
Variable err is being initialized to zero and then later being set to the error return from the call to hci_req_run_skb; hence we can remove the redundant initialization to zero. Also on two occassions err is not being set from the error return from the call to hci_req_run_skb, so add these missing assignments. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: Avoid bt_accept_unlink() double unlinkingDean Jenkins1-0/+24
There is a race condition between a thread calling bt_accept_dequeue() and a different thread calling bt_accept_unlink(). Protection against concurrency is implemented using sk locking. However, sk locking causes serialisation of the bt_accept_dequeue() and bt_accept_unlink() threads. This serialisation can cause bt_accept_dequeue() to obtain the sk from the parent list but becomes blocked waiting for the sk lock held by the bt_accept_unlink() thread. bt_accept_unlink() unlinks sk and this thread releases the sk lock unblocking bt_accept_dequeue() which potentially runs bt_accept_unlink() again on the same sk causing a crash. The attempt to double unlink the same sk from the parent list can cause a NULL pointer dereference crash due to bt_sk(sk)->parent becoming NULL on the first unlink, followed by the second unlink trying to execute bt_sk(sk)->parent->sk_ack_backlog-- in bt_accept_unlink() which crashes. When sk is in the parent list, bt_sk(sk)->parent will be not be NULL. When sk is removed from the parent list, bt_sk(sk)->parent is set to NULL. Therefore, add a defensive check for bt_sk(sk)->parent not being NULL to ensure that sk is still in the parent list after the sk lock has been taken in bt_accept_dequeue(). If bt_sk(sk)->parent is detected as being NULL then restart the loop so that the loop variables are refreshed to use the latest values. This is necessary as list_for_each_entry_safe() is not thread safe so causing a risk of an infinite loop occurring as sk could point to itself. In addition, in bt_accept_dequeue() increase the sk reference count to protect against early freeing of sk. Early freeing can be possible if the bt_accept_unlink() thread calls l2cap_sock_kill() or rfcomm_sock_kill() functions before bt_accept_dequeue() gets the sk lock. For test purposes, the probability of failure can be increased by putting a msleep of 1 second in bt_accept_dequeue() between getting the sk and waiting for the sk lock. This exposes the fact that the loop list_for_each_entry_safe(p, n, &bt_sk(parent)->accept_q) is not safe from threads that unlink sk from the list in parallel with the loop which can cause sk to become stale within the loop. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: Handle bt_accept_enqueue() socket atomicallyDean Jenkins1-0/+2
There is a small risk that bt_accept_unlink() runs concurrently with bt_accept_enqueue() on the same socket. This scenario could potentially lead to a NULL pointer dereference of the socket's parent member because the socket can be on the list but the socket's parent member is not yet updated by bt_accept_enqueue(). Therefore, add socket locking inside bt_accept_enqueue() so that the socket is added to the list AND the parent's socket address is set in the socket's parent member. The socket locking ensures that the socket is on the list with a valid non-NULL parent member. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-126lowpan: Fix IID format for BluetoothLuiz Augusto von Dentz1-67/+12
According to RFC 7668 U/L bit shall not be used: https://wiki.tools.ietf.org/html/rfc7668#section-3.2.2 [Page 10]: In the figure, letter 'b' represents a bit from the Bluetooth device address, copied as is without any changes on any bit. This means that no bit in the IID indicates whether the underlying Bluetooth device address is public or random. |0 1|1 3|3 4|4 6| |0 5|6 1|2 7|8 3| +----------------+----------------+----------------+----------------+ |bbbbbbbbbbbbbbbb|bbbbbbbb11111111|11111110bbbbbbbb|bbbbbbbbbbbbbbbb| +----------------+----------------+----------------+----------------+ Because of this the code cannot figure out the address type from the IP address anymore thus it makes no sense to use peer_lookup_ba as it needs the peer address type. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-126lowpan: Use netdev addr_len to determine lladdr lenLuiz Augusto von Dentz1-36/+6
This allow technologies such as Bluetooth to use its native lladdr which is eui48 instead of eui64 which was expected by functions like lowpan_header_decompress and lowpan_header_compress. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12bluetooth: Set 6 byte device addressesPatrik Flykt1-11/+8
Set BTLE MAC addresses that are 6 bytes long and not 8 bytes that are used in other places with 6lowpan. Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12Bluetooth: convert rfcomm_dlc.refcnt from atomic_t to refcount_tElena Reshetova1-2/+2
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 10:47:02 +0000