| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fix validation of NUMA coverage.
memblock_validate_numa_coverage() was checking for a unset node ID
using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was
specified by buggy firmware.
Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()"
* tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node()
memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
|
|
Grepping /proc/allocinfo for "noprof" reveals several xyz_noprof
functions, which means internally they are calling profiled functions.
This should never happen as such calls move allocation charge from a
higher level location where it should be accounted for into these lower
level helpers. Fix this by replacing profiled function calls with noprof
ones.
Link: https://lkml.kernel.org/r/20240531205350.3973009-1-surenb@google.com
Fixes: b951aaff5035 ("mm: enable page allocation tagging")
Fixes: e26d8769da6d ("mempool: hook up to memory allocation profiling")
Fixes: 88ae5fb755b0 ("mm: vmalloc: enable memory allocation profiling")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_MEM_ALLOC_PROFILING_DEBUG is enabled, the following warning
may be noticed:
[ 48.299584] ------------[ cut here ]------------
[ 48.300092] alloc_tag was not set
[ 48.300528] WARNING: CPU: 2 PID: 1361 at include/linux/alloc_tag.h:130 alloc_tagging_slab_free_hook+0x84/0xc7
[ 48.301305] Modules linked in:
[ 48.301553] CPU: 2 PID: 1361 Comm: systemd-udevd Not tainted 6.10.0-rc1-00003-gac8755535862 #176
[ 48.302196] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 48.302752] RIP: 0010:alloc_tagging_slab_free_hook+0x84/0xc7
[ 48.303169] Code: 8d 1c c4 48 85 db 74 4d 48 83 3b 00 75 1e 80 3d 65 02 86 04 00 75 15 48 c7 c7 11 48 1d 85 c6 05 55 02 86 04 01 e8 64 44 a5 ff <0f> 0b 48 8b 03 48 85 c0 74 21 48 83 f8 01 74 14 48 8b 50 20 48 f7
[ 48.304411] RSP: 0018:ffff8880111b7d40 EFLAGS: 00010282
[ 48.304916] RAX: 0000000000000000 RBX: ffff88800fcc9008 RCX: 0000000000000000
[ 48.305455] RDX: 0000000080000000 RSI: ffff888014060000 RDI: ffffed1002236f97
[ 48.305979] RBP: 0000000000001100 R08: fffffbfff0aa73a1 R09: 0000000000000000
[ 48.306473] R10: ffffffff814515e5 R11: 0000000000000003 R12: ffff88800fcc9000
[ 48.306943] R13: ffff88800b2e5cc0 R14: ffff8880111b7d90 R15: 0000000000000000
[ 48.307529] FS: 00007faf5d1908c0(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
[ 48.308223] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 48.308710] CR2: 000058fb220c9118 CR3: 00000000110cc000 CR4: 0000000000750ef0
[ 48.309274] PKRU: 55555554
[ 48.309804] Call Trace:
[ 48.310029] <TASK>
[ 48.310290] ? show_regs+0x84/0x8d
[ 48.310722] ? alloc_tagging_slab_free_hook+0x84/0xc7
[ 48.311298] ? __warn+0x13b/0x2ff
[ 48.311580] ? alloc_tagging_slab_free_hook+0x84/0xc7
[ 48.311987] ? report_bug+0x2ce/0x3ab
[ 48.312292] ? handle_bug+0x8c/0x107
[ 48.312563] ? exc_invalid_op+0x34/0x6f
[ 48.312842] ? asm_exc_invalid_op+0x1a/0x20
[ 48.313173] ? this_cpu_in_panic+0x1c/0x72
[ 48.313503] ? alloc_tagging_slab_free_hook+0x84/0xc7
[ 48.313880] ? putname+0x143/0x14e
[ 48.314152] kmem_cache_free+0xe9/0x214
[ 48.314454] putname+0x143/0x14e
[ 48.314712] do_unlinkat+0x413/0x45e
[ 48.315001] ? __pfx_do_unlinkat+0x10/0x10
[ 48.315388] ? __check_object_size+0x4d7/0x525
[ 48.315744] ? __sanitizer_cov_trace_pc+0x20/0x4a
[ 48.316167] ? __sanitizer_cov_trace_pc+0x20/0x4a
[ 48.316757] ? getname_flags+0x4ed/0x500
[ 48.317261] __x64_sys_unlink+0x42/0x4a
[ 48.317741] do_syscall_64+0xe2/0x149
[ 48.318171] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 48.318602] RIP: 0033:0x7faf5d8850ab
[ 48.318891] Code: fd ff ff e8 27 dd 01 00 0f 1f 80 00 00 00 00 f3 0f 1e fa b8 5f 00 00 00 0f 05 c3 0f 1f 40 00 f3 0f 1e fa b8 57 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 05 c3 0f 1f 40 00 48 8b 15 41 2d 0e 00 f7 d8
[ 48.320649] RSP: 002b:00007ffc44982b38 EFLAGS: 00000246 ORIG_RAX: 0000000000000057
[ 48.321182] RAX: ffffffffffffffda RBX: 00005ba344a44680 RCX: 00007faf5d8850ab
[ 48.321667] RDX: 0000000000000000 RSI: 00005ba344a44430 RDI: 00007ffc44982b40
[ 48.322139] RBP: 00007ffc44982c00 R08: 0000000000000000 R09: 0000000000000007
[ 48.322598] R10: 00005ba344a44430 R11: 0000000000000246 R12: 0000000000000000
[ 48.323071] R13: 00007ffc44982b40 R14: 0000000000000000 R15: 0000000000000000
[ 48.323596] </TASK>
This is due to a race when two objects are allocated from the same slab,
which did not have an obj_exts allocated for.
In such a case, the two threads will notice the NULL obj_exts and after
one assigns slab->obj_exts, the second one will happily do the exchange if
it reads this new assigned value.
In order to avoid that, verify that the read obj_exts does not point to an
allocated obj_exts before doing the exchange.
Link: https://lkml.kernel.org/r/20240527183007.1595037-1-cascardo@igalia.com
Fixes: 09c46563ff6d ("codetag: debug: introduce OBJEXTS_ALLOC_FAIL to mark failed slab_ext allocations")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysbot reported a splat [1] on __unmap_hugepage_range(). This is because
vma_needs_reservation() can return -ENOMEM if
allocate_file_region_entries() fails to allocate the file_region struct
for the reservation.
Check for that and do not call vma_add_reservation() if that is the case,
otherwise region_abort() and region_del() will see that we do not have any
file_regions.
If we detect that vma_needs_reservation() returned -ENOMEM, we clear the
hugetlb_restore_reserve flag as if this reservation was still consumed, so
free_huge_folio() will not increment the resv count.
[1] https://lore.kernel.org/linux-mm/0000000000004096100617c58d54@google.com/T/#ma5983bc1ab18a54910da83416b3f89f3c7ee43aa
Link: https://lkml.kernel.org/r/20240528205323.20439-1-osalvador@suse.de
Fixes: df7a6d1f6405 ("mm/hugetlb: restore the reservation if needed")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-and-tested-by: syzbot+d3fe2dc5ffe9380b714b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/0000000000004096100617c58d54@google.com/
Cc: Breno Leitao <leitao@debian.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We normally ksm_zero_pages++ in ksmd when page is merged with zero page,
but ksm_zero_pages-- is done from page tables side, where there is no any
accessing protection of ksm_zero_pages.
So we can read very exceptional value of ksm_zero_pages in rare cases,
such as -1, which is very confusing to users.
Fix it by changing to use atomic_long_t, and the same case with the
mm->ksm_zero_pages.
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-2-34bb358fdc13@linux.dev
Fixes: e2942062e01d ("ksm: count all zero pages placed by KSM")
Fixes: 6080d19f0704 ("ksm: add ksm zero pages for each process")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ksm: fix some accounting problems", v3.
We encountered some abnormal ksm_pages_scanned and ksm_zero_pages during
some random tests.
1. ksm_pages_scanned unchanged even ksmd scanning has progress.
2. ksm_zero_pages maybe -1 in some rare cases.
This patch (of 2):
During testing, I found ksm_pages_scanned is unchanged although the
scan_get_next_rmap_item() did return valid rmap_item that is not NULL.
The reason is the scan_get_next_rmap_item() will return NULL after a full
scan, so ksm_do_scan() just return without accounting of the
ksm_pages_scanned.
Fix it by just putting ksm_pages_scanned accounting in that loop, and it
will be accounted more timely if that loop would last for a long time.
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-0-34bb358fdc13@linux.dev
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-1-34bb358fdc13@linux.dev
Fixes: b348b5fe2b5f ("mm/ksm: add pages scanned metric")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As noticed by Brian, KMSAN should not be zeroing the origin when
unpoisoning parts of a four-byte uninitialized value, e.g.:
char a[4];
kmsan_unpoison_memory(a, 1);
This led to false negatives, as certain poisoned values could receive zero
origins, preventing those values from being reported.
To fix the problem, check that kmsan_internal_set_shadow_origin() writes
zero origins only to slots which have zero shadow.
Link: https://lkml.kernel.org/r/20240528104807.738758-1-glider@google.com
Fixes: f80be4571b19 ("kmsan: add KMSAN runtime core")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/lkml/20240524232804.1984355-1-bjohannesmeyer@gmail.com/T/
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 2c9e5d4a0082 ("bpf: remove CONFIG_BPF_JIT dependency on
CONFIG_MODULES of") CONFIG_BPF_JIT does not depend on CONFIG_MODULES any
more and bpf jit also uses the [MODULES_VADDR, MODULES_END] memory region.
But is_vmalloc_or_module_addr() still checks CONFIG_MODULES, which then
returns false for a bpf jit memory region when CONFIG_MODULES is not
defined. It leads to the following kernel BUG:
[ 1.567023] ------------[ cut here ]------------
[ 1.567883] kernel BUG at mm/vmalloc.c:745!
[ 1.568477] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1.569367] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.9.0+ #448
[ 1.570247] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 1.570786] RIP: 0010:vmalloc_to_page+0x48/0x1ec
[ 1.570786] Code: 0f 00 00 e8 eb 1a 05 00 b8 37 00 00 00 48 ba fe ff ff ff ff 1f 00 00 4c 03 25 76 49 c6 02 48 c1 e0 28 48 01 e8 48 39 d0 76 02 <0f> 0b 4c 89 e7 e8 bf 1a 05 00 49 8b 04 24 48 a9 9f ff ff ff 0f 84
[ 1.570786] RSP: 0018:ffff888007787960 EFLAGS: 00010212
[ 1.570786] RAX: 000036ffa0000000 RBX: 0000000000000640 RCX: ffffffff8147e93c
[ 1.570786] RDX: 00001ffffffffffe RSI: dffffc0000000000 RDI: ffffffff840e32c8
[ 1.570786] RBP: ffffffffa0000000 R08: 0000000000000000 R09: 0000000000000000
[ 1.570786] R10: ffff888007787a88 R11: ffffffff8475d8e7 R12: ffffffff83e80ff8
[ 1.570786] R13: 0000000000000640 R14: 0000000000000640 R15: 0000000000000640
[ 1.570786] FS: 0000000000000000(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[ 1.570786] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.570786] CR2: ffff888006a01000 CR3: 0000000003e80000 CR4: 0000000000350ef0
[ 1.570786] Call Trace:
[ 1.570786] <TASK>
[ 1.570786] ? __die_body+0x1b/0x58
[ 1.570786] ? die+0x31/0x4b
[ 1.570786] ? do_trap+0x9d/0x138
[ 1.570786] ? vmalloc_to_page+0x48/0x1ec
[ 1.570786] ? do_error_trap+0xcd/0x102
[ 1.570786] ? vmalloc_to_page+0x48/0x1ec
[ 1.570786] ? vmalloc_to_page+0x48/0x1ec
[ 1.570786] ? handle_invalid_op+0x2f/0x38
[ 1.570786] ? vmalloc_to_page+0x48/0x1ec
[ 1.570786] ? exc_invalid_op+0x2b/0x41
[ 1.570786] ? asm_exc_invalid_op+0x16/0x20
[ 1.570786] ? vmalloc_to_page+0x26/0x1ec
[ 1.570786] ? vmalloc_to_page+0x48/0x1ec
[ 1.570786] __text_poke+0xb6/0x458
[ 1.570786] ? __pfx_text_poke_memcpy+0x10/0x10
[ 1.570786] ? __pfx___mutex_lock+0x10/0x10
[ 1.570786] ? __pfx___text_poke+0x10/0x10
[ 1.570786] ? __pfx_get_random_u32+0x10/0x10
[ 1.570786] ? srso_return_thunk+0x5/0x5f
[ 1.570786] text_poke_copy_locked+0x70/0x84
[ 1.570786] text_poke_copy+0x32/0x4f
[ 1.570786] bpf_arch_text_copy+0xf/0x27
[ 1.570786] bpf_jit_binary_pack_finalize+0x26/0x5a
[ 1.570786] bpf_int_jit_compile+0x576/0x8ad
[ 1.570786] ? __pfx_bpf_int_jit_compile+0x10/0x10
[ 1.570786] ? srso_return_thunk+0x5/0x5f
[ 1.570786] ? __kmalloc_node_track_caller+0x2b5/0x2e0
[ 1.570786] bpf_prog_select_runtime+0x7c/0x199
[ 1.570786] bpf_prepare_filter+0x1e9/0x25b
[ 1.570786] ? __pfx_bpf_prepare_filter+0x10/0x10
[ 1.570786] ? srso_return_thunk+0x5/0x5f
[ 1.570786] ? _find_next_bit+0x29/0x7e
[ 1.570786] bpf_prog_create+0xb8/0xe0
[ 1.570786] ptp_classifier_init+0x75/0xa1
[ 1.570786] ? __pfx_ptp_classifier_init+0x10/0x10
[ 1.570786] ? srso_return_thunk+0x5/0x5f
[ 1.570786] ? register_pernet_subsys+0x36/0x42
[ 1.570786] ? srso_return_thunk+0x5/0x5f
[ 1.570786] sock_init+0x99/0xa3
[ 1.570786] ? __pfx_sock_init+0x10/0x10
[ 1.570786] do_one_initcall+0x104/0x2c4
[ 1.570786] ? __pfx_do_one_initcall+0x10/0x10
[ 1.570786] ? parameq+0x25/0x2d
[ 1.570786] ? rcu_is_watching+0x1c/0x3c
[ 1.570786] ? trace_kmalloc+0x81/0xb2
[ 1.570786] ? srso_return_thunk+0x5/0x5f
[ 1.570786] ? __kmalloc+0x29c/0x2c7
[ 1.570786] ? srso_return_thunk+0x5/0x5f
[ 1.570786] do_initcalls+0xf9/0x123
[ 1.570786] kernel_init_freeable+0x24f/0x289
[ 1.570786] ? __pfx_kernel_init+0x10/0x10
[ 1.570786] kernel_init+0x19/0x13a
[ 1.570786] ret_from_fork+0x24/0x41
[ 1.570786] ? __pfx_kernel_init+0x10/0x10
[ 1.570786] ret_from_fork_asm+0x1a/0x30
[ 1.570786] </TASK>
[ 1.570819] ---[ end trace 0000000000000000 ]---
[ 1.571463] RIP: 0010:vmalloc_to_page+0x48/0x1ec
[ 1.572111] Code: 0f 00 00 e8 eb 1a 05 00 b8 37 00 00 00 48 ba fe ff ff ff ff 1f 00 00 4c 03 25 76 49 c6 02 48 c1 e0 28 48 01 e8 48 39 d0 76 02 <0f> 0b 4c 89 e7 e8 bf 1a 05 00 49 8b 04 24 48 a9 9f ff ff ff 0f 84
[ 1.574632] RSP: 0018:ffff888007787960 EFLAGS: 00010212
[ 1.575129] RAX: 000036ffa0000000 RBX: 0000000000000640 RCX: ffffffff8147e93c
[ 1.576097] RDX: 00001ffffffffffe RSI: dffffc0000000000 RDI: ffffffff840e32c8
[ 1.577084] RBP: ffffffffa0000000 R08: 0000000000000000 R09: 0000000000000000
[ 1.578077] R10: ffff888007787a88 R11: ffffffff8475d8e7 R12: ffffffff83e80ff8
[ 1.578810] R13: 0000000000000640 R14: 0000000000000640 R15: 0000000000000640
[ 1.579823] FS: 0000000000000000(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[ 1.580992] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.581869] CR2: ffff888006a01000 CR3: 0000000003e80000 CR4: 0000000000350ef0
[ 1.582800] Kernel panic - not syncing: Fatal exception
[ 1.583765] ---[ end Kernel panic - not syncing: Fatal exception ]---
Fix this by checking CONFIG_EXECMEM instead.
Link: https://lkml.kernel.org/r/20240528160838.102223-1-xiyou.wangcong@gmail.com
Fixes: 2c9e5d4a0082 ("bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Christoph reports a page allocator splat triggered by xfstests:
generic/176 214s ... [ 1204.507931] run fstests generic/176 at 2024-05-27 12:52:30
XFS (nvme0n1): Mounting V5 Filesystem cd936307-415f-48a3-b99d-a2d52ae1f273
XFS (nvme0n1): Ending clean mount
XFS (nvme1n1): Mounting V5 Filesystem ab3ee1a4-af62-4934-9a6a-6c2fde321850
XFS (nvme1n1): Ending clean mount
XFS (nvme1n1): Unmounting Filesystem ab3ee1a4-af62-4934-9a6a-6c2fde321850
XFS (nvme1n1): Mounting V5 Filesystem 7099b02d-9c58-4d1d-be1d-2cc472d12cd9
XFS (nvme1n1): Ending clean mount
------------[ cut here ]------------
page type is 3, passed migratetype is 1 (nr=512)
WARNING: CPU: 0 PID: 509870 at mm/page_alloc.c:645 expand+0x1c5/0x1f0
Modules linked in: i2c_i801 crc32_pclmul i2c_smbus [last unloaded: scsi_debug]
CPU: 0 PID: 509870 Comm: xfs_io Not tainted 6.10.0-rc1+ #2437
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:expand+0x1c5/0x1f0
Code: 05 16 70 bf 02 01 e8 ca fc ff ff 8b 54 24 34 44 89 e1 48 c7 c7 80 a2 28 83 48 89 c6 b8 01 00 3
RSP: 0018:ffffc90003b2b968 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffffffff83fa9480 RCX: 0000000000000000
RDX: 0000000000000005 RSI: 0000000000000027 RDI: 00000000ffffffff
RBP: 00000000001f2600 R08: 00000000fffeffff R09: 0000000000000001
R10: 0000000000000000 R11: ffffffff83676200 R12: 0000000000000009
R13: 0000000000000200 R14: 0000000000000001 R15: ffffea0007c98000
FS: 00007f72ca3d5780(0000) GS:ffff8881f9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f72ca1fff38 CR3: 00000001aa0c6002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x7b/0x120
? expand+0x1c5/0x1f0
? report_bug+0x191/0x1c0
? handle_bug+0x3c/0x80
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? expand+0x1c5/0x1f0
? expand+0x1c5/0x1f0
__rmqueue_pcplist+0x3a9/0x730
get_page_from_freelist+0x7a0/0xf00
__alloc_pages_noprof+0x153/0x2e0
__folio_alloc_noprof+0x10/0xa0
__filemap_get_folio+0x16b/0x370
iomap_write_begin+0x496/0x680
While trying to service a movable allocation (page type 1), the page
allocator runs into a two-pageblock buddy on the movable freelist whose
second block is typed as highatomic (page type 3).
This inconsistency is caused by the highatomic reservation system
operating on single pageblocks, while MAX_ORDER can be bigger than that -
in this configuration, pageblock_order is 9 while MAX_PAGE_ORDER is 10.
The test case is observed to make several adjacent order-3 requests with
__GFP_DIRECT_RECLAIM cleared, which marks the surrounding block as
highatomic. Upon freeing, the blocks merge into an order-10 buddy. When
the highatomic pool is drained later on, this order-10 buddy gets moved
back to the movable list, but only the first pageblock is marked movable
again. A subsequent expand() of this buddy warns about the tail being of
a different type.
This is a long-standing bug that's surfaced by the recent block type
warnings added to the allocator. The consequences seem mostly benign, it
just results in odd behavior: the highatomic tail blocks are not properly
drained, instead they end up on the movable list first, then go back to
the highatomic list after an alloc-free cycle.
To fix this, make the highatomic reservation code aware that
allocations/buddies can be larger than a pageblock.
While it's an old quirk, the recently added type consistency warnings seem
to be the most prominent consequence of it. Set the Fixes: tag
accordingly to highlight this backporting dependency.
Link: https://lkml.kernel.org/r/20240530114203.GA1222079@cmpxchg.org
Fixes: e0932b6c1f94 ("mm: page_alloc: consolidate free page accounting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The assert was introduced in the commit cited below as an insurance that
the semantic is the same after the local_irq_save() has been removed and
the function has been made static.
The original requirement to disable interrupt was due the modification
of per-CPU counters which require interrupts to be disabled because the
counter update operation is not atomic and some of the counters are
updated from interrupt context.
All callers of __mod_objcg_mlstate() acquire a lock
(memcg_stock.stock_lock) which disables interrupts on !PREEMPT_RT and
the lockdep assert is satisfied. On PREEMPT_RT the interrupts are not
disabled and the assert triggers.
The safety of the counter update is already ensured by
VM_WARN_ON_IRQS_ENABLED() which is part of __mod_memcg_lruvec_state() and
does not require yet another check.
Remove the lockdep assert from __mod_objcg_mlstate().
Link: https://lkml.kernel.org/r/20240528141341.rz_rytN_@linutronix.de
Fixes: 91882c1617c1 ("memcg: simple cleanup of stats update functions")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The mTHP swap related counters: 'anon_swpout' and 'anon_swpout_fallback'
are confusing with an 'anon_' prefix, since the shmem can swap out
non-anonymous pages. So drop the 'anon_' prefix to keep consistent with
the old swap counter names.
This is needed in 6.10-rcX to avoid having an inconsistent ABI out in the
field.
Link: https://lkml.kernel.org/r/7a8989c13299920d7589007a30065c3e2c19f0e0.1716431702.git.baolin.wang@linux.alibaba.com
Fixes: d0f048ac39f6 ("mm: add per-order mTHP anon_swpout and anon_swpout_fallback counters")
Fixes: 42248b9d34ea ("mm: add docs for per-order mTHP counters and transhuge_page ABI")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On an (old) x86 system with SRAT just covering space above 4Gb:
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug
the commit referenced below leads to this NUMA configuration no longer
being refused by a CONFIG_NUMA=y kernel (previously
NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
was seen in the log directly after the message quoted above), because of
memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This
in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES
triggering, followed by a NULL deref in memmap_init() when trying to
access node 64's (NODE_SHIFT=6) node data.
To compensate said change, make memblock_set_node() warn on and adjust
a passed in value of MAX_NUMNODES, just like various other functions
already do.
Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1c8a058c-5365-4f27-a9f1-3aeb7fb3e7b2@suse.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes, 11 of which are cc:stable.
A few nilfs2 fixes, the remainder are for MM: a couple of selftests
fixes, various singletons fixing various issues in various parts"
* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/ksm: fix possible UAF of stable_node
mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
nilfs2: fix potential hang in nilfs_detach_log_writer()
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
nilfs2: fix use-after-free of timer for log writer thread
selftests/mm: fix build warnings on ppc64
arm64: patching: fix handling of execmem addresses
selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
selftests/mm: compaction_test: fix bogus test success on Aarch64
mailmap: update email address for Satya Priya
mm/huge_memory: don't unpoison huge_zero_folio
kasan, fortify: properly rename memintrinsics
lib: add version into /proc/allocinfo output
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
|
|
The commit 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page
deduplication limit") introduced a possible failure case in the
stable_tree_insert(), where we may free the new allocated stable_node_dup
if we fail to prepare the missing chain node.
Then that kfolio return and unlock with a freed stable_node set... And
any MM activities can come in to access kfolio->mapping, so UAF.
Fix it by moving folio_set_stable_node() to the end after stable_node
is inserted successfully.
Link: https://lkml.kernel.org/r/20240513-b4-ksm-stable-node-uaf-v1-1-f687de76f452@linux.dev
Fixes: 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page deduplication limit")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When I did memory failure tests recently, below panic occurs:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:1009!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:__del_page_from_free_list+0x151/0x180
RSP: 0018:ffffa49c90437998 EFLAGS: 00000046
RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0
RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69
R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80
R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009
FS: 00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0
Call Trace:
<TASK>
__rmqueue_pcplist+0x23b/0x520
get_page_from_freelist+0x26b/0xe40
__alloc_pages_noprof+0x113/0x1120
__folio_alloc_noprof+0x11/0xb0
alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130
__alloc_fresh_hugetlb_folio+0xe7/0x140
alloc_pool_huge_folio+0x68/0x100
set_max_huge_pages+0x13d/0x340
hugetlb_sysctl_handler_common+0xe8/0x110
proc_sys_call_handler+0x194/0x280
vfs_write+0x387/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xc2/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff916114887
RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887
RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003
RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0
R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004
R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
And before the panic, there had an warning about bad page state:
BUG: Bad page state in process page-types pfn:8cee00
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
page_type: 0xffffff7f(buddy)
raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000
page dumped because: nonzero mapcount
Modules linked in: mce_inject hwpoison_inject
CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty #22
Call Trace:
<TASK>
dump_stack_lvl+0x83/0xa0
bad_page+0x63/0xf0
free_unref_page+0x36e/0x5c0
unpoison_memory+0x50b/0x630
simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110
debugfs_attr_write+0x42/0x60
full_proxy_write+0x5b/0x80
vfs_write+0xcd/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xc2/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f189a514887
RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887
RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003
RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8
R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040
</TASK>
The root cause should be the below race:
memory_failure
try_memory_failure_hugetlb
me_huge_page
__page_handle_poison
dissolve_free_hugetlb_folio
drain_all_pages -- Buddy page can be isolated e.g. for compaction.
take_page_off_buddy -- Failed as page is not in the buddy list.
-- Page can be putback into buddy after compaction.
page_ref_inc -- Leads to buddy page with refcnt = 1.
Then unpoison_memory() can unpoison the page and send the buddy page back
into buddy list again leading to the above bad page state warning. And
bad_page() will call page_mapcount_reset() to remove PageBuddy from buddy
page leading to later VM_BUG_ON_PAGE(!PageBuddy(page)) when trying to
allocate this page.
Fix this issue by only treating __page_handle_poison() as successful when
it returns 1.
Link: https://lkml.kernel.org/r/20240523071217.1696196-1-linmiaohe@huawei.com
Fixes: ceaf8fbea79a ("mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When I did memory failure tests recently, below panic occurs:
kernel BUG at include/linux/mm.h:1135!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
Call Trace:
<TASK>
do_shrink_slab+0x14f/0x6a0
shrink_slab+0xca/0x8c0
shrink_node+0x2d0/0x7d0
balance_pgdat+0x33a/0x720
kswapd+0x1f3/0x410
kthread+0xd5/0x100
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
The root cause is that HWPoison flag will be set for huge_zero_folio
without increasing the folio refcnt. But then unpoison_memory() will
decrease the folio refcnt unexpectedly as it appears like a successfully
hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when
releasing huge_zero_folio.
Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue.
We're not prepared to unpoison huge_zero_folio yet.
Link: https://lkml.kernel.org/r/20240516122608.22610-1-linmiaohe@huawei.com
Fixes: 478d134e9506 ("mm/huge_memory: do not overkill when splitting huge_zero_page")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc")
includes support for __GFP_NOFAIL, but it presents a conflict with commit
dd544141b9eb ("vmalloc: back off when the current task is OOM-killed"). A
possible scenario is as follows:
process-a
__vmalloc_node_range(GFP_KERNEL | __GFP_NOFAIL)
__vmalloc_area_node()
vm_area_alloc_pages()
--> oom-killer send SIGKILL to process-a
if (fatal_signal_pending(current)) break;
--> return NULL;
To fix this, do not check fatal_signal_pending() in vm_area_alloc_pages()
if __GFP_NOFAIL set.
This issue occurred during OPLUS KASAN TEST. Below is part of the log
-> oom-killer sends signal to process
[65731.222840] [ T1308] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/apps/uid_10198,task=gs.intelligence,pid=32454,uid=10198
[65731.259685] [T32454] Call trace:
[65731.259698] [T32454] dump_backtrace+0xf4/0x118
[65731.259734] [T32454] show_stack+0x18/0x24
[65731.259756] [T32454] dump_stack_lvl+0x60/0x7c
[65731.259781] [T32454] dump_stack+0x18/0x38
[65731.259800] [T32454] mrdump_common_die+0x250/0x39c [mrdump]
[65731.259936] [T32454] ipanic_die+0x20/0x34 [mrdump]
[65731.260019] [T32454] atomic_notifier_call_chain+0xb4/0xfc
[65731.260047] [T32454] notify_die+0x114/0x198
[65731.260073] [T32454] die+0xf4/0x5b4
[65731.260098] [T32454] die_kernel_fault+0x80/0x98
[65731.260124] [T32454] __do_kernel_fault+0x160/0x2a8
[65731.260146] [T32454] do_bad_area+0x68/0x148
[65731.260174] [T32454] do_mem_abort+0x151c/0x1b34
[65731.260204] [T32454] el1_abort+0x3c/0x5c
[65731.260227] [T32454] el1h_64_sync_handler+0x54/0x90
[65731.260248] [T32454] el1h_64_sync+0x68/0x6c
[65731.260269] [T32454] z_erofs_decompress_queue+0x7f0/0x2258
--> be->decompressed_pages = kvcalloc(be->nr_pages, sizeof(struct page *), GFP_KERNEL | __GFP_NOFAIL);
kernel panic by NULL pointer dereference.
erofs assume kvmalloc with __GFP_NOFAIL never return NULL.
[65731.260293] [T32454] z_erofs_runqueue+0xf30/0x104c
[65731.260314] [T32454] z_erofs_readahead+0x4f0/0x968
[65731.260339] [T32454] read_pages+0x170/0xadc
[65731.260364] [T32454] page_cache_ra_unbounded+0x874/0xf30
[65731.260388] [T32454] page_cache_ra_order+0x24c/0x714
[65731.260411] [T32454] filemap_fault+0xbf0/0x1a74
[65731.260437] [T32454] __do_fault+0xd0/0x33c
[65731.260462] [T32454] handle_mm_fault+0xf74/0x3fe0
[65731.260486] [T32454] do_mem_abort+0x54c/0x1b34
[65731.260509] [T32454] el0_da+0x44/0x94
[65731.260531] [T32454] el0t_64_sync_handler+0x98/0xb4
[65731.260553] [T32454] el0t_64_sync+0x198/0x19c
Link: https://lkml.kernel.org/r/20240510100131.1865-1-hailong.liu@oppo.com
Fixes: 9376130c390a ("mm/vmalloc: add support for __GFP_NOFAIL")
Signed-off-by: Hailong.Liu <hailong.liu@oppo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Barry Song <21cnbao@gmail.com>
Reported-by: Oven <liyangouwen1@oppo.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new mseal() is an syscall on 64 bit CPU, and with following signature:
int mseal(void addr, size_t len, unsigned long flags)
addr/len: memory range.
flags: reserved.
mseal() blocks following operations for the given memory range.
1> Unmapping, moving to another location, and shrinking the size,
via munmap() and mremap(), can leave an empty space, therefore can
be replaced with a VMA with a new set of attributes.
2> Moving or expanding a different VMA into the current location,
via mremap().
3> Modifying a VMA via mmap(MAP_FIXED).
4> Size expansion, via mremap(), does not appear to pose any specific
risks to sealed VMAs. It is included anyway because the use case is
unclear. In any case, users can rely on merging to expand a sealed VMA.
5> mprotect() and pkey_mprotect().
6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous
memory, when users don't have write permission to the memory. Those
behaviors can alter region contents by discarding pages, effectively a
memset(0) for anonymous memory.
Following input during RFC are incooperated into this patch:
Jann Horn: raising awareness and providing valuable insights on the
destructive madvise operations.
Linus Torvalds: assisting in defining system call signature and scope.
Liam R. Howlett: perf optimization.
Theo de Raadt: sharing the experiences and insight gained from
implementing mimmutable() in OpenBSD.
Finally, the idea that inspired this patch comes from Stephen Röttger's
work in Chrome V8 CFI.
[jeffxu@chromium.org: add branch prediction hint, per Pedro]
Link: https://lkml.kernel.org/r/20240423192825.1273679-2-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-3-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more mm updates from Andrew Morton:
"A series from Dave Chinner which cleans up and fixes the handling of
nested allocations within stackdepot and page-owner"
* tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page-owner: use gfp_nested_mask() instead of open coded masking
stackdepot: use gfp_nested_mask() instead of open coded masking
mm: lift gfp_kmemleak_mask() to gfp.h
|
|
Use '%pD' to print out the filename, and print out the actual offset
within the file too, rather than just what the virtual address of the
mapping is (which doesn't tell you anything about any mapping offsets).
Also, use the exact vma_lookup() instead of find_vma() - the latter
looks up any vma _after_ the address, which is of questionable value
(yes, maybe you fell off the beginning, but you'd be more likely to fall
off the end).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs blocksize updates from Al Viro:
"This gets rid of bogus set_blocksize() uses, switches it over
to be based on a 'struct file *' and verifies that the caller
has the device opened exclusively"
* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make set_blocksize() fail unless block device is opened exclusive
set_blocksize(): switch to passing struct file *
btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
swsusp: don't bother with setting block size
zram: don't bother with reopening - just use O_EXCL for open
swapon(2): open swap with O_EXCL
swapon(2)/swapoff(2): don't bother with block size
pktcdvd: sort set_blocksize() calls out
bcache_register(): don't bother with set_blocksize()
|
|
The page-owner tracking code records stack traces during page allocation.
To do this, it must do a memory allocation for the stack information from
inside an existing memory allocation context. This internal allocation
must obey the high level caller allocation constraints to avoid generating
false positive warnings that have nothing to do with the code they are
instrumenting/tracking (e.g. through lockdep reclaim state tracking)
We also don't want recording stack traces to deplete emergency memory
reserves - debug code is useless if it creates new issues that can't be
replicated when the debug code is disabled.
Switch the stack tracking allocation masking to use gfp_nested_mask() to
address these issues. gfp_nested_mask() naturally strips GFP_ZONEMASK,
too, which greatly simplifies this code.
Link: https://lkml.kernel.org/r/20240430054604.4169568-4-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: fix nested allocation context filtering".
This patchset is the followup to the comment I made earlier today:
https://lore.kernel.org/linux-xfs/ZjAyIWUzDipofHFJ@dread.disaster.area/
Tl;dr: Memory allocations that are done inside the public memory
allocation API need to obey the reclaim recursion constraints placed on
the allocation by the original caller, including the "don't track
recursion for this allocation" case defined by __GFP_NOLOCKDEP.
These nested allocations are generally in debug code that is tracking
something about the allocation (kmemleak, KASAN, etc) and so are
allocating private kernel objects that only that debug system will use.
Neither the page-owner code nor the stack depot code get this right. They
also also clear GFP_ZONEMASK as a separate operation, which is completely
redundant because the constraint filter applied immediately after
guarantees that GFP_ZONEMASK bits are cleared.
kmemleak gets this filtering right. It preserves the allocation
constraints for deadlock prevention and clears all other context flags
whilst also ensuring that the nested allocation will fail quickly,
silently and without depleting emergency kernel reserves if there is no
memory available.
This can be made much more robust, immune to whack-a-mole games and the
code greatly simplified by lifting gfp_kmemleak_mask() to
include/linux/gfp.h and using that everywhere. Also document it so that
there is no excuse for not knowing about it when writing new debug code
that nests allocations.
Tested with lockdep, KASAN + page_owner=on and kmemleak=on over multiple
fstests runs with XFS.
This patch (of 3):
Any "internal" nested allocation done from within an allocation context
needs to obey the high level allocation gfp_mask constraints. This is
necessary for debug code like KASAN, kmemleak, lockdep, etc that allocate
memory for saving stack traces and other information during memory
allocation. If they don't obey things like __GFP_NOLOCKDEP or
__GFP_NOWARN, they produce false positive failure detections.
kmemleak gets this right by using gfp_kmemleak_mask() to pass through the
relevant context flags to the nested allocation to ensure that the
allocation follows the constraints of the caller context.
KASAN recently was foudn to be missing __GFP_NOLOCKDEP due to stack depot
allocations, and even more recently the page owner tracking code was also
found to be missing __GFP_NOLOCKDEP support.
We also don't wan't want KASAN or lockdep to drive the system into OOM
kill territory by exhausting emergency reserves. This is something that
kmemleak also gets right by adding (__GFP_NORETRY | __GFP_NOMEMALLOC |
__GFP_NOWARN) to the allocation mask.
Hence it is clear that we need to define a common nested allocation filter
mask for these sorts of third party nested allocations used in debug code.
So to start this process, lift gfp_kmemleak_mask() to gfp.h and rename it
to gfp_nested_mask(), and convert the kmemleak callers to use it.
Link: https://lkml.kernel.org/r/20240430054604.4169568-1-david@fromorbit.com
Link: https://lkml.kernel.org/r/20240430054604.4169568-2-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
"Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo:
Clean up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb:
Fixes for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over
macros. The series is "codingstyle: avoid unused parameters for a
function-like macro""
* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
fs/proc: fix softlockup in __read_vmcore
nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
scripts: checkpatch: check unused parameters for function-like macro
Documentation: coding-style: ask function-like macros to evaluate parameters
nilfs2: use __field_struct() for a bitwise field
selftests/kcmp: remove unused open mode
nilfs2: remove calls to folio_set_error() and folio_clear_error()
kernel/watchdog_perf.c: tidy up kerneldoc
watchdog: allow nmi watchdog to use raw perf event
watchdog: handle comma separated nmi_watchdog command line
nilfs2: make superblock data array index computation sparse friendly
squashfs: remove calls to set the folio error flag
squashfs: convert squashfs_symlink_read_folio to use folio APIs
scripts/gdb: fix detection of current CPU in KGDB
scripts/gdb: make get_thread_info accept pointers
scripts/gdb: fix parameter handling in $lx_per_cpu
scripts/gdb: fix failing KGDB detection during probe
kfifo: don't use "proxy" headers
media: stih-cec: add missing io.h
media: rc: add missing io.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from
the STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
Renesas IPMMU:
- Add support for R8A779H0 hardware
... and a couple smaller fixes and updates across the sub-tree"
* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
iommu/arm-smmu-v3: Make the kunit into a module
arm64: Properly clean up iommu-dma remnants
iommu/amd: Enable Guest Translation after reading IOMMU feature register
iommu/vt-d: Decouple igfx_off from graphic identity mapping
iommu/amd: Fix compilation error
iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
iommu/arm-smmu-v3: Move the CD generation for SVA into a function
iommu/arm-smmu-v3: Allocate the CD table entry in advance
iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
iommu/arm-smmu-v3: Consolidate clearing a CD table entry
iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
iommu/arm-smmu-v3: Add an ops indirection to the STE code
iommu/arm-smmu-qcom: Don't build debug features as a kernel module
iommu/amd: Add SVA domain support
iommu: Add ops->domain_alloc_sva()
iommu/amd: Initial SVA support for AMD IOMMU
iommu/amd: Add support for enable/disable IOPF
iommu/amd: Add IO page fault notifier handler
...
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.
- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
LoongArch:
- Add ParaVirt IPI support
- Add software breakpoint support
- Add mmio trace events support
RISC-V:
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
- Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.
x86:
- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.
This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.
This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.
- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- As usual, a bunch of code cleanups.
x86 (AMD):
- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.
The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.
- Support for GHCB version 2 as applicable to SEV-ES guests.
This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.
x86 (Intel):
- An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.
Generic:
- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().
- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.
The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.
Selftests:
- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.
If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.
- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.
- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.
Documentation:
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...
|
|
Extend execmem parameters to accommodate more complex overrides of
module_alloc() by architectures.
This includes specification of a fallback range required by arm, arm64
and powerpc, EXECMEM_MODULE_DATA type required by powerpc, support for
allocation of KASAN shadow required by s390 and x86 and support for
late initialization of execmem required by arm64.
The core implementation of execmem_alloc() takes care of suppressing
warnings when the initial allocation fails but there is a fallback range
defined.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Tested-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Several architectures override module_alloc() only to define address
range for code allocations different than VMALLOC address space.
Provide a generic implementation in execmem that uses the parameters for
address space ranges, required alignment and page protections provided
by architectures.
The architectures must fill execmem_info structure and implement
execmem_arch_setup() that returns a pointer to that structure. This way the
execmem initialization won't be called from every architecture, but rather
from a central place, namely a core_initcall() in execmem.
The execmem provides execmem_alloc() API that wraps __vmalloc_node_range()
with the parameters defined by the architectures. If an architecture does
not implement execmem_arch_setup(), execmem_alloc() will fall back to
module_alloc().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
module_alloc() is used everywhere as a mean to allocate memory for code.
Beside being semantically wrong, this unnecessarily ties all subsystems
that need to allocate code, such as ftrace, kprobes and BPF to modules and
puts the burden of code allocation to the modules code.
Several architectures override module_alloc() because of various
constraints where the executable memory can be located and this causes
additional obstacles for improvements of code allocation.
Start splitting code allocation from modules by introducing execmem_alloc()
and execmem_free() APIs.
Initially, execmem_alloc() is a wrapper for module_alloc() and
execmem_free() is a replacement of module_memfree() to allow updating all
call sites to use the new APIs.
Since architectures define different restrictions on placement,
permissions, alignment and other parameters for memory that can be used by
different subsystems that allocate executable memory, execmem_alloc() takes
a type argument, that will be used to identify the calling subsystem and to
allow architectures define parameters for ranges suitable for that
subsystem.
No functional changes.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Pull io_uring updates from Jens Axboe:
- Greatly improve send zerocopy performance, by enabling coalescing of
sent buffers.
MSG_ZEROCOPY already does this with send(2) and sendmsg(2), but the
io_uring side did not. In local testing, the crossover point for send
zerocopy being faster is now around 3000 byte packets, and it
performs better than the sync syscall variants as well.
This feature relies on a shared branch with net-next, which was
pulled into both branches.
- Unification of how async preparation is done across opcodes.
Previously, opcodes that required extra memory for async retry would
allocate that as needed, using on-stack state until that was the
case. If async retry was needed, the on-stack state was adjusted
appropriately for a retry and then copied to the allocated memory.
This led to some fragile and ugly code, particularly for read/write
handling, and made storage retries more difficult than they needed to
be. Allocate the memory upfront, as it's cheap from our pools, and
use that state consistently both initially and also from the retry
side.
- Move away from using remap_pfn_range() for mapping the rings.
This is really not the right interface to use and can cause lifetime
issues or leaks. Additionally, it means the ring sq/cq arrays need to
be physically contigious, which can cause problems in production with
larger rings when services are restarted, as memory can be very
fragmented at that point.
Move to using vm_insert_page(s) for the ring sq/cq arrays, and apply
the same treatment to mapped ring provided buffers. This also helps
unify the code we have dealing with allocating and mapping memory.
Hard to see in the diffstat as we're adding a few features as well,
but this kills about ~400 lines of code from the codebase as well.
- Add support for bundles for send/recv.
When used with provided buffers, bundles support sending or receiving
more than one buffer at the time, improving the efficiency by only
needing to call into the networking stack once for multiple sends or
receives.
- Tweaks for our accept operations, supporting both a DONTWAIT flag for
skipping poll arm and retry if we can, and a POLLFIRST flag that the
application can use to skip the initial accept attempt and rely
purely on poll for triggering the operation. Both of these have
identical flags on the receive side already.
- Make the task_work ctx locking unconditional.
We had various code paths here that would do a mix of lock/trylock
and set the task_work state to whether or not it was locked. All of
that goes away, we lock it unconditionally and get rid of the state
flag indicating whether it's locked or not.
The state struct still exists as an empty type, can go away in the
future.
- Add support for specifying NOP completion values, allowing it to be
used for error handling testing.
- Use set/test bit for io-wq worker flags. Not strictly needed, but
also doesn't hurt and helps silence a KCSAN warning.
- Cleanups for io-wq locking and work assignments, closing a tiny race
where cancelations would not be able to find the work item reliably.
- Misc fixes, cleanups, and improvements
* tag 'for-6.10/io_uring-20240511' of git://git.kernel.dk/linux: (97 commits)
io_uring: support to inject result for NOP
io_uring: fail NOP if non-zero op flags is passed in
io_uring/net: add IORING_ACCEPT_POLL_FIRST flag
io_uring/net: add IORING_ACCEPT_DONTWAIT flag
io_uring/filetable: don't unnecessarily clear/reset bitmap
io_uring/io-wq: Use set_bit() and test_bit() at worker->flags
io_uring/msg_ring: cleanup posting to IOPOLL vs !IOPOLL ring
io_uring: Require zeroed sqe->len on provided-buffers send
io_uring/notif: disable LAZY_WAKE for linked notifs
io_uring/net: fix sendzc lazy wake polling
io_uring/msg_ring: reuse ctx->submitter_task read using READ_ONCE instead of re-reading it
io_uring/rw: reinstate thread check for retries
io_uring/notif: implement notification stacking
io_uring/notif: simplify io_notif_flush()
net: add callback for setting a ubuf_info to skb
net: extend ubuf_info callback to ops structure
io_uring/net: support bundles for recv
io_uring/net: support bundles for send
io_uring/kbuf: add helpers for getting/peeking multiple buffers
io_uring/net: add provided buffer support for IORING_OP_SEND
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This reworks the netfslib writeback implementation so that pages read
from the cache are written to the cache through ->writepages(),
thereby allowing the fscache page flag to be retired.
The reworking also:
- builds on top of the new writeback_iter() infrastructure
- makes it possible to use vectored write RPCs as discontiguous
streams of pages can be accommodated
- makes it easier to do simultaneous content crypto and stream
division
- provides support for retrying writes and re-dividing a stream
- replaces the ->launder_folio() op, so that ->writepages() is used
instead
- uses mempools to allocate the netfs_io_request and
netfs_io_subrequest structs to avoid allocation failure in the
writeback path
Some code that uses the fscache page flag is retained for
compatibility purposes with nfs and ceph. The code is switched to
using the synonymous private_2 label instead and marked with
deprecation comments.
The merge commit contains additional details on the new algorithm that
I've left out of here as it would probably be excessively detailed.
On top of the netfslib infrastructure this contains the work to
convert cifs over to netfslib"
* tag 'vfs-6.10.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
cifs: Enable large folio support
cifs: Remove some code that's no longer used, part 3
cifs: Remove some code that's no longer used, part 2
cifs: Remove some code that's no longer used, part 1
cifs: Cut over to using netfslib
cifs: Implement netfslib hooks
cifs: Make add_credits_and_wake_if() clear deducted credits
cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs
cifs: Set zero_point in the copy_file_range() and remap_file_range()
cifs: Move cifs_loose_read_iter() and cifs_file_write_iter() to file.c
cifs: Replace the writedata replay bool with a netfs sreq flag
cifs: Make wait_mtu_credits take size_t args
cifs: Use more fields from netfs_io_subrequest
cifs: Replace cifs_writedata with a wrapper around netfs_io_subrequest
cifs: Replace cifs_readdata with a wrapper around netfs_io_subrequest
cifs: Use alternative invalidation to using launder_folio
netfs, afs: Use writeback retry to deal with alternate keys
netfs: Miscellaneous tidy ups
netfs: Remove the old writeback code
netfs: Cut over to using new writeback code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Free up FMODE_* bits. I've freed up bits 6, 7, 8, and 24. That
means we now have six free FMODE_* bits in total (but bit #6
already got used for FMODE_WRITE_RESTRICTED)
- Add FOP_HUGE_PAGES flag (follow-up to FMODE_* cleanup)
- Add fd_raw cleanup class so we can make use of automatic cleanup
provided by CLASS(fd_raw, f)(fd) for O_PATH fds as well
- Optimize seq_puts()
- Simplify __seq_puts()
- Add new anon_inode_getfile_fmode() api to allow specifying f_mode
instead of open-coding it in multiple places
- Annotate struct file_handle with __counted_by() and use
struct_size()
- Warn in get_file() whether f_count resurrection from zero is
attempted (epoll/drm discussion)
- Folio-sophize aio
- Export the subvolume id in statx() for both btrfs and bcachefs
- Relax linkat(AT_EMPTY_PATH) requirements
- Add F_DUPFD_QUERY fcntl() allowing to compare two file descriptors
for dup*() equality replacing kcmp()
Cleanups:
- Compile out swapfile inode checks when swap isn't enabled
- Use (1 << n) notation for FMODE_* bitshifts for clarity
- Remove redundant variable assignment in fs/direct-io
- Cleanup uses of strncpy in orangefs
- Speed up and cleanup writeback
- Move fsparam_string_empty() helper into header since it's currently
open-coded in multiple places
- Add kernel-doc comments to proc_create_net_data_write()
- Don't needlessly read dentry->d_flags twice
Fixes:
- Fix out-of-range warning in nilfs2
- Fix ecryptfs overflow due to wrong encryption packet size
calculation
- Fix overly long line in xfs file_operations (follow-up to FMODE_*
cleanup)
- Don't raise FOP_BUFFER_{R,W}ASYNC for directories in xfs (follow-up
to FMODE_* cleanup)
- Don't call xfs_file_open from xfs_dir_open (follow-up to FMODE_*
cleanup)
- Fix stable offset api to prevent endless loops
- Fix afs file server rotations
- Prevent xattr node from overflowing the eraseblock in jffs2
- Move fdinfo PTRACE_MODE_READ procfs check into the .permission()
operation instead of .open() operation since this caused userspace
regressions"
* tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
afs: Fix fileserver rotation getting stuck
selftests: add F_DUPDFD_QUERY selftests
fcntl: add F_DUPFD_QUERY fcntl()
file: add fd_raw cleanup class
fs: WARN when f_count resurrection is attempted
seq_file: Simplify __seq_puts()
seq_file: Optimize seq_puts()
proc: Move fdinfo PTRACE_MODE_READ check into the inode .permission operation
fs: Create anon_inode_getfile_fmode()
xfs: don't call xfs_file_open from xfs_dir_open
xfs: drop fop_flags for directories
xfs: fix overly long line in the file_operations
shmem: Fix shmem_rename2()
libfs: Add simple_offset_rename() API
libfs: Fix simple_offset_rename_exchange()
jffs2: prevent xattr node from overflowing the eraseblock
vfs, swap: compile out IS_SWAPFILE() on swapless configs
vfs: relax linkat() AT_EMPTY_PATH - aka flink() - requirements
fs/direct-io: remove redundant assignment to variable retval
fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading
...
|
|
Pull documentation updates from Jonathan Corbet:
"Another not-too-busy cycle for documentation, including:
- Some build-system changes to detect the variable fonts installed by
some distributions that can break the PDF build.
- Various updates and additions to the Spanish, Chinese, Italian, and
Japanese translations.
- Update the stable-kernel rules to match modern practice
... and the usual array of corrections, updates, and typo fixes"
* tag 'docs-6.10' of git://git.lwn.net/linux: (42 commits)
cgroup: Add documentation for missing zswap memory.stat
kernel-doc: Added "*" in $type_constants2 to fix 'make htmldocs' warning.
docs:core-api: fixed typos and grammar in printk-index page
Documentation: tracing: Fix spelling mistakes
docs/zh_CN/rust: Update the translation of quick-start to 6.9-rc4
docs/zh_CN/rust: Update the translation of general-information to 6.9-rc4
docs/zh_CN/rust: Update the translation of coding-guidelines to 6.9-rc4
docs/zh_CN/rust: Update the translation of arch-support to 6.9-rc4
docs: stable-kernel-rules: fix typo sent->send
docs/zh_CN: remove two inconsistent spaces
docs: scripts/check-variable-fonts.sh: Improve commands for detection
docs: stable-kernel-rules: create special tag to flag 'no backporting'
docs: stable-kernel-rules: explain use of stable@kernel.org (w/o @vger.)
docs: stable-kernel-rules: remove code-labels tags and a indention level
docs: stable-kernel-rules: call mainline by its name and change example
docs: stable-kernel-rules: reduce redundancy
docs, kprobes: Add riscv as supported architecture
Docs: typos/spelling
docs: kernel_include.py: Cope with docutils 0.21
docs: ja_JP/howto: Catch up update in v6.8
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"This time it's mostly random cleanups and fixes, with two performance
fixes that might have significant impact, but limited to systems
experiencing particular bad corner case scenarios rather than general
performance improvements.
The memcg hook changes are going through the mm tree due to
dependencies.
- Prevent stalls when reading /proc/slabinfo (Jianfeng Wang)
This fixes the long-standing problem that can happen with workloads
that have alloc/free patterns resulting in many partially used
slabs (in e.g. dentry cache). Reading /proc/slabinfo will traverse
the long partial slab list under spinlock with disabled irqs and
thus can stall other processes or even trigger the lockup
detection. The traversal is only done to count free objects so that
<active_objs> column can be reported along with <num_objs>.
To avoid affecting fast paths with another shared counter
(attempted in the past) or complex partial list traversal schemes
that allow rescheduling, the chosen solution resorts to
approximation - when the partial list is over 10000 slabs long, we
will only traverse first 5000 slabs from head and tail each and use
the average of those to estimate the whole list. Both head and tail
are used as the slabs near head to tend to have more free objects
than the slabs towards the tail.
It is expected the approximation should not break existing
/proc/slabinfo consumers. The <num_objs> field is still accurate
and reflects the overall kmem_cache footprint. The <active_objs>
was already imprecise due to cpu and percpu-partial slabs, so can't
be relied upon to determine exact cache usage. The difference
between <active_objs> and <num_objs> is mainly useful to determine
the slab fragmentation, and that will be possible even with the
approximation in place.
- Prevent allocating many slabs when a NUMA node is full (Chen Jun)
Currently, on NUMA systems with a node under significantly bigger
pressure than other nodes, the fallback strategy may result in each
kmalloc_node() that can't be safisfied from the preferred node, to
allocate a new slab on a fallback node, and not reuse the slabs
already on that node's partial list.
This is now fixed and partial lists of fallback nodes are checked
even for kmalloc_node() allocations. It's still preferred to
allocate a new slab on the requested node before a fallback, but
only with a GFP_NOWAIT attempt, which will fail quickly when the
node is under a significant memory pressure.
- More SLAB removal related cleanups (Xiu Jianfeng, Hyunmin Lee)
- Fix slub_kunit self-test with hardened freelists (Guenter Roeck)
- Mark racy accesses for KCSAN (linke li)
- Misc cleanups (Xiongwei Song, Haifeng Xu, Sangyun Kim)"
* tag 'slab-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: remove the check for NULL kmalloc_caches
mm/slub: create kmalloc 96 and 192 caches regardless cache size order
mm/slub: mark racy access on slab->freelist
slub: use count_partial_free_approx() in slab_out_of_memory()
slub: introduce count_partial_free_approx()
slub: Set __GFP_COMP in kmem_cache by default
mm/slub: remove duplicate initialization for early_kmem_cache_node_alloc()
mm/slub: correct comment in do_slab_free()
mm/slub, kunit: Use inverted data to corrupt kmem cache
mm/slub: simplify get_partial_node()
mm/slub: add slub_get_cpu_partial() helper
mm/slub: remove the check of !kmem_cache_has_cpu_partial()
mm/slub: Reduce memory consumption in extreme scenarios
mm/slub: mark racy accesses on slab->slabs
mm/slub: remove dummy slabinfo functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Store AP Query Configuration Information in a static buffer
- Rework the AP initialization and add missing cleanups to the error
path
- Swap IRQ and AP bus/device registration to avoid race conditions
- Export prot_virt_guest symbol
- Introduce AP configuration changes notifier interface to facilitate
modularization of the AP bus
- Add CONFIG_AP kernel configuration option to allow modularization of
the AP bus
- Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description
and dependency and rename it to CONFIG_AP_DEBUG
- Convert sprintf() and snprintf() to sysfs_emit() in CIO code
- Adjust indentation of RELOCS command build step
- Make crypto performance counters upward compatible
- Convert make_page_secure() and gmap_make_secure() to use folio
- Rework channel-utilization-block (CUB) handling in preparation of
introducing additional CUBs
- Use attribute groups to simplify registration, removal and extension
of measurement-related channel-path sysfs attributes
- Add a per-channel-path binary "ext_measurement" sysfs attribute that
provides access to extended channel-path measurement data
- Export measurement data for all channel-measurement-groups (CMG), not
only for a specific ones. This enables support of new CMG data
formats in userspace without the need for kernel changes
- Add a per-channel-path sysfs attribute "speed_bps" that provides the
operating speed in bits per second or 0 if the operating speed is not
available
- The CIO tracepoint subchannel-type field "st" is incorrectly set to
the value of subchannel-enabled SCHIB "ena" field. Fix that
- Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS
- Consider the maximum physical address available to a DCSS segment
(512GB) when memory layout is set up
- Simplify the virtual memory layout setup by reducing the size of
identity mapping vs vmemmap overlap
- Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
This will allow to place the kernel image next to kernel modules
- Move everyting KASLR related from <asm/setup.h> to <asm/page.h>
- Put virtual memory layout information into a structure to improve
code generation
- Currently __kaslr_offset is the kernel offset in both physical and
virtual memory spaces. Uncouple these offsets to allow uncoupling of
the addresses spaces
- Currently the identity mapping base address is implicit and is always
set to zero. Make it explicit by putting into __identity_base
persistent boot variable and use it in proper context
- Introduce .amode31 section start and end macros AMODE31_START and
AMODE31_END
- Introduce OS_INFO entries that do not reference any data in memory,
but rather provide only values
- Store virtual memory layout in OS_INFO. It is read out by
makedumpfile, crash and other tools
- Store virtual memory layout in VMCORE_INFO. It is read out by crash
and other tools when /proc/kcore device is used
- Create additional PT_LOAD ELF program header that covers kernel image
only, so that vmcore tools could locate kernel text and data when
virtual and physical memory spaces are uncoupled
- Uncouple physical and virtual address spaces
- Map kernel at fixed location when KASLR mode is disabled. The
location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration
value.
- Rework deployment of kernel image for both compressed and
uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel
configuration value
- Move .vmlinux.relocs section in front of the compressed kernel. The
interim section rescue step is avoided as result
- Correct modules thunk offset calculation when branch target is more
than 2GB away
- Kernel modules contain their own set of expoline thunks. Now that the
kernel modules area is less than 4GB away from kernel expoline
thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN
the default if the compiler supports it
- userfaultfd can insert shared zeropages into processes running VMs,
but that is not allowed for s390. Fallback to allocating a fresh
zeroed anonymous folio and insert that instead
- Re-enable shared zeropages for non-PV and non-skeys KVM guests
- Rename hex2bitmap() to ap_hex2bitmap() and export it for external use
- Add ap_config sysfs attribute to provide the means for setting or
displaying adapters, domains and control domains assigned to a
vfio-ap mediated device in a single operation
- Make vfio_ap_mdev_link_queue() ignore duplicate link requests
- Add write support to ap_config sysfs attribute to allow atomic update
a vfio-ap mediated device state
- Document ap_config sysfs attribute
- Function os_info_old_init() is expected to be called only from a
regular kdump kernel. Enable it to be called from a stand-alone dump
kernel
- Address gcc -Warray-bounds warning and fix array size in struct
os_info
- s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks
- Use unwinder instead of __builtin_return_address() with ftrace to
prevent returning of undefined values
- Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is
disabled
- Compile kernel with -fPIC and link with -no-pie to allow kpatch
feature always succeed and drop the whole CONFIG_PIE_BUILD
option-enabled code
- Add missing virt_to_phys() converter for VSIE facility and crypto
control blocks
* tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
Revert "s390: Relocate vmlinux ELF data to virtual address space"
KVM: s390: vsie: Use virt_to_phys for crypto control block
s390: Relocate vmlinux ELF data to virtual address space
s390: Compile kernel with -fPIC and link with -no-pie
s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD
s390/ftrace: Use unwinder instead of __builtin_return_address()
s390/pci: Drop unneeded reference to CONFIG_DMI
s390/os_info: Fix array size in struct os_info
s390/os_info: Initialize old os_info in standalone dump kernel
docs: Update s390 vfio-ap doc for ap_config sysfs attribute
s390/vfio-ap: Add write support to sysfs attr ap_config
s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue
s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state
s390/ap: Externalize AP bus specific bitmap reading function
s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests
mm/userfaultfd: Do not place zeropages when zeropages are disallowed
s390/expoline: Make modules use kernel expolines
s390/nospec: Correct modules thunk offset calculation
s390/boot: Do not rescue .vmlinux.relocs section
s390/boot: Rework deployment of the kernel image
...
|
|
into next
|
|
Since commit 857f21397f71 ("memcg, oom: remove unnecessary check in
mem_cgroup_oom_synchronize()"), memcg_oom_gfp_mask and memcg_oom_order are
no longer used any more.
Link: https://lkml.kernel.org/r/20240509032628.1217652-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Benjamin Segall <bsegall@google.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 1cb9dc4b475c ("mm: hwpoison: support recovery from HugePage
copy-on-write faults") added support to use the mc variants when coping
hugetlb pages on CoW faults.
Add the missing VM_FAULT_SET_HINDEX, so the right si_addr_lsb will be
passed to userspace to report the extension of the faulty area.
Link: https://lkml.kernel.org/r/20240509100148.22384-3-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Minor fixups for hugetlb fault path".
This series contains a couple of fixups for hugetlb_fault and hugetlb_wp
respectively, where a VM_FAULT_SET_HINDEX call was missing.
I did not bother with a Fixes tag because the missing piece here is that
we will not report to userspace the right extension of the faulty area by
adjusting struct kernel_siginfo.si_addr_lsb, but I do not consider that to
be a big issue because I assume that userspace already knows the size of
the mapping anyway.
This patch (of 2):
commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general")
added the code to handle pte_markers in hugetlb faulting path. In case of
an UFFD_POISON event, a PTE_MARKER_POISONED will be created and we will
return VM_FAULT_HWPOISON_LARGE upon detecting that in the fault path. Add
the missing VM_FAULT_SET_HINDEX, so the right si_addr_lsb will be passed
to userspace to report the extension of the faulty area.
Link: https://lkml.kernel.org/r/20240509100148.22384-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20240509100148.22384-2-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
alloc_mem_cgroup_per_node_info() returns int that doesn't map to any errno
error code. The only existing caller doesn't really need an error code so
change the function to return bool (true on success) because this is
slightly less confusing and more consistent with the other code.
Link: https://lkml.kernel.org/r/20240507132324.1158510-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damos_wmark_metric_value's return value is 'unsigned long', so returning
-EINVAL as 'unsigned long' may turn out to be very different from the
expected one (using 2's complement) and treat as usual matric's value.
So, fix that, checking if returned value is not 0.
Link: https://lkml.kernel.org/r/20240506180238.53842-1-sj@kernel.org
Fixes: ee801b7dd782 ("mm/damon/schemes: activate schemes based on a watermarks mechanism")
Signed-off-by: Alex Rusuf <yorha.op@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Previously, all NR_VM_EVENT_ITEMS stats were maintained per-memcg,
although some of those fields are not exposed anywhere. Commit
14e0f6c957e39 ("memcg: reduce memory for the lruvec and memcg stats")
changed this such that we only maintain the stats we actually expose
per-memcg via a translation table.
Additionally, commit 514462bbe927b ("memcg: warn for unexpected events
and stats") added a warning if a per-memcg stat update is attempted for
a stat that is not in the translation table. The warning started firing
for the NR_{FILE/SHMEM}_PMDMAPPED stat updates in the rmap code. These
stats are not maintained per-memcg, and hence are not in the translation
table.
Do not use __lruvec_stat_mod_folio() when updating NR_FILE_PMDMAPPED and
NR_SHMEM_PMDMAPPED. Use __mod_node_page_state() instead, which updates
the global per-node stats only.
Link: https://lkml.kernel.org/r/20240506192924.271999-1-yosryahmed@google.com
Fixes: 514462bbe927 ("memcg: warn for unexpected events and stats")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reported-by: syzbot+9319a4268a640e26b72b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/0000000000001b9d500617c8b23c@google.com
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: misc fixes and improvements".
Add miscelleneous and non-urgent fixes and improvements for DAMON code,
selftests, and documents.
This patch (of 10):
damos_quota_init_priv() function should initialize all private fields of
struct damos_quota. However, it is not initializing ->esz_bp field. This
could result in use of uninitialized variable from
damon_feed_loop_next_input() function. There is no such issue at the
moment because every caller of the function is passing damos_quota object
that already having the field zero value. But we cannot guarantee the
future, and the function is not doing what it is promising. A bug is a
bug. This fix is for preventing possible future issues.
Link: https://lkml.kernel.org/r/20240503180318.72798-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240503180318.72798-2-sj@kernel.org
Fixes: 9294a037c015 ("mm/damon/core: implement goal-oriented feedback-driven quota auto-tuning")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"18 hotfixes, 7 of which are cc:stable.
More fixups for this cycle's page_owner updates. And a few userfaultfd
fixes. Otherwise, random singletons - see the individual changelogs
for details"
* tag 'mm-hotfixes-stable-2024-05-10-13-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Barry Song
selftests/mm: fix powerpc ARCH check
mailmap: add entry for John Garry
XArray: set the marks correctly when splitting an entry
selftests/vDSO: fix runtime errors on LoongArch
selftests/vDSO: fix building errors on LoongArch
mm,page_owner: don't remove __GFP_NOLOCKDEP in add_stack_record_to_list
fs/proc/task_mmu: fix uffd-wp confusion in pagemap_scan_pmd_entry()
fs/proc/task_mmu: fix loss of young/dirty bits during pagemap scan
mm/vmalloc: fix return value of vb_alloc if size is 0
mm: use memalloc_nofs_save() in page_cache_ra_order()
kmsan: compiler_types: declare __no_sanitize_or_inline
lib/test_xarray.c: fix error assumptions on check_xa_multi_store_adv_add()
tools: fix userspace compilation with new test_xarray changes
MAINTAINERS: update URL's for KEYS/KEYRINGS_INTEGRITY and TPM DEVICE DRIVER
mm: page_owner: fix wrong information in dump_page_owner
maple_tree: fix mas_empty_area_rev() null pointer dereference
mm/userfaultfd: reset ptes when close() for wr-protected ones
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.10
1. Add ParaVirt IPI support.
2. Add software breakpoint support.
3. Add mmio trace events support.
|
|
We now handle order-1 folios correctly, so we don't need this assertion
any more.
Link: https://lkml.kernel.org/r/20240429190114.3126789-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All reclaim_folio_list() callers are passing 'true' for
'ignore_references' parameter. In other words, the parameter is not
really being used. Simplify the code by removing the parameter.
Link: https://lkml.kernel.org/r/20240429224451.67081-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All reclaim_pages() callers are setting 'ignore_references' parameter
'true'. In other words, the parameter is not really being used. Remove
the argument to make it simple.
Link: https://lkml.kernel.org/r/20240429224451.67081-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'pageout' DAMOS action implementation of 'paddr' DAMON operations set asks
reclaim_pages() to do page level access check if the user is not asking
DAMOS to do that on its own. Simplify the logic by making the check
always be done by 'paddr'.
Link: https://lkml.kernel.org/r/20240429224451.67081-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
