summaryrefslogtreecommitdiff
path: root/kernel/time/tick-sched.c
AgeCommit message (Collapse)AuthorFilesLines
2014-01-25Merge branch 'timers/core' of ↵Ingo Molnar1-13/+14
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/urgent Pull dynticks cleanups from Frederic Weisbecker. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-20Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-23/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: - ARM clocksource/clockevent improvements and fixes - generic timekeeping updates: TAI fixes/improvements, cleanups - Posix cpu timer cleanups and improvements - dynticks updates: full dynticks bugfixes, optimizations and cleanups * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) clocksource: Timer-sun5i: Switch to sched_clock_register() timekeeping: Remove comment that's mostly out of date rtc-cmos: Add an alarm disable quirk timekeeper: fix comment typo for tk_setup_internals() timekeeping: Fix missing timekeeping_update in suspend path timekeeping: Fix CLOCK_TAI timer/nanosleep delays tick/timekeeping: Call update_wall_time outside the jiffies lock timekeeping: Avoid possible deadlock from clock_was_set_delayed timekeeping: Fix potential lost pv notification of time change timekeeping: Fix lost updates to tai adjustment clocksource: sh_cmt: Add clk_prepare/unprepare support clocksource: bcm_kona_timer: Remove unused bcm_timer_ids clocksource: vt8500: Remove deprecated IRQF_DISABLED clocksource: tegra: Remove deprecated IRQF_DISABLED clocksource: misc drivers: Remove deprecated IRQF_DISABLED clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata() clocksource: sh_tmu: Remove unnecessary platform_set_drvdata() clocksource: armada-370-xp: Enable timer divider only when needed clocksource: clksrc-of: Warn if no clock sources are found clocksource: orion: Switch to sched_clock_register() ...
2014-01-15nohz_full: fix code style issue of tick_nohz_full_stop_tickAlex Shi1-8/+8
Code usually starts with 'tab' instead of 7 'space' in kernel Signed-off-by: Alex Shi <alex.shi@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Link: http://lkml.kernel.org/r/1386074112-30754-2-git-send-email-alex.shi@linaro.org Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-15nohz: Get timekeeping max deferment outside jiffies_lockFrederic Weisbecker1-1/+2
We don't need to fetch the timekeeping max deferment under the jiffies_lock seqlock. If the clocksource is updated concurrently while we stop the tick, stop machine is called and the tick will be reevaluated again along with uptodate jiffies and its related values. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Link: http://lkml.kernel.org/r/1387320692-28460-9-git-send-email-fweisbec@gmail.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-15tick: Rename tick_check_idle() to tick_irq_enter()Frederic Weisbecker1-4/+4
This makes the code more symetric against the existing tick functions called on irq exit: tick_irq_exit() and tick_nohz_irq_exit(). These function are also symetric as they mirror each other's action: we start to account idle time on irq exit and we stop this accounting on irq entry. Also the tick is stopped on irq exit and timekeeping catches up with the tickless time elapsed until we reach irq entry. This rename was suggested by Peter Zijlstra a long while ago but it got forgotten in the mass. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Link: http://lkml.kernel.org/r/1387320692-28460-2-git-send-email-fweisbec@gmail.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-13sched/clock, x86: Use a static_key for sched_clock_stablePeter Zijlstra1-1/+1
In order to avoid the runtime condition and variable load turn sched_clock_stable into a static_key. Also provide a shorter implementation of local_clock() and cpu_clock(int) when sched_clock_stable==1. MAINLINE PRE POST sched_clock_stable: 1 1 1 (cold) sched_clock: 329841 221876 215295 (cold) local_clock: 301773 234692 220773 (warm) sched_clock: 38375 25602 25659 (warm) local_clock: 100371 33265 27242 (warm) rdtsc: 27340 24214 24208 sched_clock_stable: 0 0 0 (cold) sched_clock: 382634 235941 237019 (cold) local_clock: 396890 297017 294819 (warm) sched_clock: 38194 25233 25609 (warm) local_clock: 143452 71234 71232 (warm) rdtsc: 27345 24245 24243 Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-eummbdechzz37mwmpags1gjr@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12Merge branch 'fortglx/3.14/time' of ↵Ingo Molnar1-0/+1
git://git.linaro.org/people/john.stultz/linux into timers/core Pull timekeeping updates from John Stultz. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12Merge branch 'linus' into timers/coreIngo Molnar1-13/+12
Pick up the latest fixes and refresh the branch. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-23tick/timekeeping: Call update_wall_time outside the jiffies lockJohn Stultz1-0/+1
Since the xtime lock was split into the timekeeping lock and the jiffies lock, we no longer need to call update_wall_time() while holding the jiffies lock. Thus, this patch splits update_wall_time() out from do_timer(). This allows us to get away from calling clock_was_set_delayed() in update_wall_time() and instead use the standard clock_was_set() call that previously would deadlock, as it causes the jiffies lock to be acquired. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-02nohz: Convert a few places to use local per cpu accessesFrederic Weisbecker1-23/+16
A few functions use remote per CPU access APIs when they deal with local values. Just do the right conversion to improve performance, code readability and debug checks. While at it, lets extend some of these function names with *_this_cpu() suffix in order to display their purpose more clearly. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-11-29nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=offThomas Gleixner1-1/+3
If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ. If CONFIG_NO_HZ=y and the nohz functionality is disabled via the command line option "nohz=off" or not enabled due to missing hardware support, then tick_nohz_get_sleep_length() returns 0. That happens because ts->sleep_length is never set in that case. Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive. Reported-by: Michal Hocko <mhocko@suse.cz> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-11-19NOHZ: Check for nohz active instead of nohz enabledThomas Gleixner1-12/+9
RCU and the fine grained idle time accounting functions check tick_nohz_enabled. But that variable is merily telling that NOHZ has been enabled in the config and not been disabled on the command line. But it does not tell anything about nohz being active. That's what all this should check for. Matthew reported, that the idle accounting on his old P1 machine showed bogus values, when he enabled NOHZ in the config and did not disable it on the kernel command line. The reason is that his machine uses (refined) jiffies as a clocksource which explains why the "fine" grained accounting went into lala land, because it depends on when the system goes and leaves idle relative to the jiffies increment. Provide a tick_nohz_active indicator and let RCU and the accounting code use this instead of tick_nohz_enable. Reported-and-tested-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: john.stultz@linaro.org Cc: mwhitehe@redhat.com Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de
2013-08-16nohz: Include local CPU in full dynticks global kickFrederic Weisbecker1-0/+1
tick_nohz_full_kick_all() is useful to notify all full dynticks CPUs that there is a system state change to checkout before re-evaluating the need for the tick. Unfortunately this is implemented using smp_call_function_many() that ignores the local CPU. This CPU also needs to re-evaluate the tick. on_each_cpu_mask() is not useful either because we don't want to re-evaluate the tick state in place but asynchronously from an IPI to avoid messing up with any random locking scenario. So lets call tick_nohz_full_kick() from tick_nohz_full_kick_all() so that the usual irq work takes care of it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1375460996-16329-4-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-14Merge branch 'timers/nohz-v3' of ↵Ingo Molnar1-32/+27
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/nohz Pull nohz improvements from Frederic Weisbecker: " It mostly contains fixes and full dynticks off-case optimizations. I believe that distros want to enable this feature so it seems important to optimize the case where the "nohz_full=" parameter is empty. ie: I'm trying to remove any performance regression that comes with NO_HZ_FULL=y when the feature is not used. This patchset improves the current situation a lot (off-case appears to be around 11% faster with hackbench, although I guess it may vary depending on the configuration but it should be significantly faster in any case) now there is still some work to do: I can still observe a remaining loss of 1.6% throughput seen with hackbench compared to CONFIG_NO_HZ_FULL=n. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-14nohz: Optimize full dynticks's sched hooks with static keysFrederic Weisbecker1-4/+4
Scheduler IPIs and task context switches are serious fast path. Let's try to hide as much as we can the impact of full dynticks APIs' off case that are called on these sites through the use of static keys. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-08-14nohz: Optimize full dynticks state checks with static keysFrederic Weisbecker1-12/+2
These APIs are frequenctly accessed and priority is given to optimize the full dynticks off-case in order to let distros enable this feature without suffering from significant performance regressions. Let's inline these APIs and optimize them with static keys. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-08-14nohz: Rename a few state variablesFrederic Weisbecker1-22/+22
Rename the full dynticks's cpumask and cpumask state variables to some more exportable names. These will be used later from global headers to optimize the main full dynticks APIs in conjunction with static keys. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-08-13nohz: Only enable context tracking on full dynticks CPUsFrederic Weisbecker1-0/+6
The context tracking subsystem has the ability to selectively enable the tracking on any defined subset of CPU. This means that we can define a CPU range that doesn't run the context tracking and another range that does. Now what we want in practice is to enable the tracking on full dynticks CPUs only. In order to perform this, we just need to pass our full dynticks CPU range selection from the full dynticks subsystem to the context tracking. This way we can spare the overhead of RCU user extended quiescent state and vtime maintainance on the CPUs that are outside the full dynticks range. Just keep in mind the raw context tracking itself is still necessary everywhere. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-07-29Revert "cpuidle: Quickly notice prediction failure for repeat mode"Rafael J. Wysocki1-7/+2
Revert commit 69a37bea (cpuidle: Quickly notice prediction failure for repeat mode), because it has been identified as the source of a significant performance regression in v3.8 and later as explained by Jeremy Eder: We believe we've identified a particular commit to the cpuidle code that seems to be impacting performance of variety of workloads. The simplest way to reproduce is using netperf TCP_RR test, so we're using that, on a pair of Sandy Bridge based servers. We also have data from a large database setup where performance is also measurably/positively impacted, though that test data isn't easily share-able. Included below are test results from 3 test kernels: kernel reverts ----------------------------------------------------------- 1) vanilla upstream (no reverts) 2) perfteam2 reverts e11538d1f03914eb92af5a1a378375c05ae8520c 3) test reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4 e11538d1f03914eb92af5a1a378375c05ae8520c In summary, netperf TCP_RR numbers improve by approximately 4% after reverting 69a37beabf1f0a6705c08e879bdd5d82ff6486c4. When 69a37beabf1f0a6705c08e879bdd5d82ff6486c4 is included, C0 residency never seems to get above 40%. Taking that patch out gets C0 near 100% quite often, and performance increases. The below data are histograms representing the %c0 residency @ 1-second sample rates (using turbostat), while under netperf test. - If you look at the first 4 histograms, you can see %c0 residency almost entirely in the 30,40% bin. - The last pair, which reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4, shows %c0 in the 80,90,100% bins. Below each kernel name are netperf TCP_RR trans/s numbers for the particular kernel that can be disclosed publicly, comparing the 3 test kernels. We ran a 4th test with the vanilla kernel where we've also set /dev/cpu_dma_latency=0 to show overall impact boosting single-threaded TCP_RR performance over 11% above baseline. 3.10-rc2 vanilla RX + c0 lock (/dev/cpu_dma_latency=0): TCP_RR trans/s 54323.78 ----------------------------------------------------------- 3.10-rc2 vanilla RX (no reverts) TCP_RR trans/s 48192.47 Receiver %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 0]: 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 59]: *********************************************************** 40.0000 - 50.0000 [ 1]: * 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 0]: Sender %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 0]: 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 11]: *********** 40.0000 - 50.0000 [ 49]: ************************************************* 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 0]: ----------------------------------------------------------- 3.10-rc2 perfteam2 RX (reverts commit e11538d1f03914eb92af5a1a378375c05ae8520c) TCP_RR trans/s 49698.69 Receiver %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 1]: * 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 59]: *********************************************************** 40.0000 - 50.0000 [ 0]: 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 0]: Sender %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 0]: 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 2]: ** 40.0000 - 50.0000 [ 58]: ********************************************************** 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 0]: ----------------------------------------------------------- 3.10-rc2 test RX (reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4 and e11538d1f03914eb92af5a1a378375c05ae8520c) TCP_RR trans/s 47766.95 Receiver %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 1]: * 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 27]: *************************** 40.0000 - 50.0000 [ 2]: ** 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 2]: ** 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 28]: **************************** Sender: 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 0]: 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 11]: *********** 40.0000 - 50.0000 [ 0]: 50.0000 - 60.0000 [ 1]: * 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 3]: *** 80.0000 - 90.0000 [ 7]: ******* 90.0000 - 100.0000 [ 38]: ************************************** These results demonstrate gaining back the tendency of the CPU to stay in more responsive, performant C-states (and thus yield measurably better performance), by reverting commit 69a37beabf1f0a6705c08e879bdd5d82ff6486c4. Requested-by: Jeremy Eder <jeder@redhat.com> Tested-by: Len Brown <len.brown@intel.com> Cc: 3.8+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-24nohz: fix compile warning in tick_nohz_init()Li Zhong1-2/+0
cpu is not used after commit 5b8621a68fdcd2baf1d3b413726f913a5254d46a Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-07-24nohz: Do not warn about unstable tsc unless user uses nohz_fullSteven Rostedt1-1/+2
If the user enables CONFIG_NO_HZ_FULL and runs the kernel on a machine with an unstable TSC, it will produce a WARN_ON dump as well as taint the kernel. This is a bit extreme for a kernel that just enables a feature but doesn't use it. The warning should only happen if the user tries to use the feature by either adding nohz_full to the kernel command line, or by enabling CONFIG_NO_HZ_FULL_ALL that makes nohz used on all CPUs at boot up. Note, this second feature should not (yet) be used by distros or anyone that doesn't care if NO_HZ is used or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-07-14kernel: delete __cpuinit usage from all core kernel filesPaul Gortmaker1-1/+1
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the uses of the __cpuinit macros from C files in the core kernel directories (kernel, init, lib, mm, and include) that don't really have a specific maintainer. [1] https://lkml.org/lkml/2013/5/20/589 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-10Merge branch 'timers/core' of ↵Ingo Molnar1-10/+5
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/urgent Pull nohz updates/fixes from Frederic Weisbecker: ' Note that "watchdog: Boot-disable by default on full dynticks" is a temporary solution to solve the issue with the watchdog that prevents the tick from stopping. This is to make sure that 3.11 doesn't have that problem as several people complained about it. A proper and longer term solution has been proposed by Peterz: http://lkml.kernel.org/r/20130618103632.GO3204@twins.programming.kicks-ass.net ' Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20nohz: Remove obsolete check for full dynticks CPUs to be RCU nocbsFrederic Weisbecker1-10/+0
Building full dynticks now implies that all CPUs are forced into RCU nocb mode through CONFIG_RCU_NOCB_CPU_ALL. The dynamic check has become useless. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de>
2013-06-20nohz: Warn if the machine can not perform nohz_fullSteven Rostedt1-0/+5
If the user configures NO_HZ_FULL and defines nohz_full=XXX on the kernel command line, or enables NO_HZ_FULL_ALL, but nohz fails due to the machine having a unstable clock, warn about it. We do not want users thinking that they are getting the benefit of nohz when their machine can not support it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-05-31nohz: Fix notifier return val that enforce timekeepingLi Zhong1-1/+1
In tick_nohz_cpu_down_callback() if the cpu is the one handling timekeeping, we must return something that stops the CPU_DOWN_PREPARE notifiers and then start notify CPU_DOWN_FAILED on the already called notifier call backs. However traditional errno values are not handled by the notifier unless these are encapsulated using errno_to_notifier(). Hence the current -EINVAL is misinterpreted and converted to junk after notifier_to_errno(), leaving the notifier subsystem to random behaviour such as eventually allowing the cpu to go down. Fix this by using the standard NOTIFY_BAD instead. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-15Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: - Cure for not using zalloc in the first place, which leads to random crashes with CPUMASK_OFF_STACK. - Revert a user space visible change which broke udev - Add a missing cpu_online early return introduced by the new full dyntick conversions - Plug a long standing race in the timer wheel cpu hotplug code. Sigh... - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu up. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline tick: Cleanup NOHZ per cpu data on cpu down tick: Use zalloc_cpumask_var for allocating offstack cpumasks
2013-05-14tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offlineThomas Gleixner1-0/+1
commit 5b39939a4 (nohz: Move ts->idle_calls incrementation into strict idle logic) moved code out of tick_nohz_stop_sched_tick() and missed to bail out when the cpu is offline. That's causing subsequent failures as an offline CPU is supposed to die and not to fiddle with nohz magic. Return false in can_stop_idle_tick() if the cpu is offline. Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz> Reported-and-tested-by: Prarit Bhargava <prarit@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305132138160.2863@ionos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-12tick: Cleanup NOHZ per cpu data on cpu downThomas Gleixner1-1/+1
Prarit reported a crash on CPU offline/online. The reason is that on CPU down the NOHZ related per cpu data of the dead cpu is not cleaned up. If at cpu online an interrupt happens before the per cpu tick device is registered the irq_enter() check potentially sees stale data and dereferences a NULL pointer. Cleanup the data after the cpu is dead. Reported-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Cc: Mike Galbraith <bitbucket@online.de> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305031451561.2886@ionos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-05Merge branch 'timers-nohz-for-linus' of ↵Linus Torvalds1-16/+280
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull 'full dynticks' support from Ingo Molnar: "This tree from Frederic Weisbecker adds a new, (exciting! :-) core kernel feature to the timer and scheduler subsystems: 'full dynticks', or CONFIG_NO_HZ_FULL=y. This feature extends the nohz variable-size timer tick feature from idle to busy CPUs (running at most one task) as well, potentially reducing the number of timer interrupts significantly. This feature got motivated by real-time folks and the -rt tree, but the general utility and motivation of full-dynticks runs wider than that: - HPC workloads get faster: CPUs running a single task should be able to utilize a maximum amount of CPU power. A periodic timer tick at HZ=1000 can cause a constant overhead of up to 1.0%. This feature removes that overhead - and speeds up the system by 0.5%-1.0% on typical distro configs even on modern systems. - Real-time workload latency reduction: CPUs running critical tasks should experience as little jitter as possible. The last remaining source of kernel-related jitter was the periodic timer tick. - A single task executing on a CPU is a pretty common situation, especially with an increasing number of cores/CPUs, so this feature helps desktop and mobile workloads as well. The cost of the feature is mainly related to increased timer reprogramming overhead when a CPU switches its tick period, and thus slightly longer to-idle and from-idle latency. Configuration-wise a third mode of operation is added to the existing two NOHZ kconfig modes: - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named as a config option. This is the traditional Linux periodic tick design: there's a HZ tick going on all the time, regardless of whether a CPU is idle or not. - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the periodic tick when a CPU enters idle mode. - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the tick when a CPU is idle, also slows the tick down to 1 Hz (one timer interrupt per second) when only a single task is running on a CPU. The .config behavior is compatible: existing !CONFIG_NO_HZ and CONFIG_NO_HZ=y settings get translated to the new values, without the user having to configure anything. CONFIG_NO_HZ_FULL is turned off by default. This feature is based on a lot of infrastructure work that has been steadily going upstream in the last 2-3 cycles: related RCU support and non-periodic cputime support in particular is upstream already. This tree adds the final pieces and activates the feature. The pull request is marked RFC because: - it's marked 64-bit only at the moment - the 32-bit support patch is small but did not get ready in time. - it has a number of fresh commits that came in after the merge window. The overwhelming majority of commits are from before the merge window, but still some aspects of the tree are fresh and so I marked it RFC. - it's a pretty wide-reaching feature with lots of effects - and while the components have been in testing for some time, the full combination is still not very widely used. That it's default-off should reduce its regression abilities and obviously there are no known regressions with CONFIG_NO_HZ_FULL=y enabled either. - the feature is not completely idempotent: there is no 100% equivalent replacement for a periodic scheduler/timer tick. In particular there's ongoing work to map out and reduce its effects on scheduler load-balancing and statistics. This should not impact correctness though, there are no known regressions related to this feature at this point. - it's a pretty ambitious feature that with time will likely be enabled by most Linux distros, and we'd like you to make input on its design/implementation, if you dislike some aspect we missed. Without flaming us to crisp! :-) Future plans: - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off the periodic tick altogether when there's a single busy task on a CPU. We'd first like 1 Hz to be exposed more widely before we go for the 0 Hz target though. - once we reach 0 Hz we can remove the periodic tick assumption from nr_running>=2 as well, by essentially interrupting busy tasks only as frequently as the sched_latency constraints require us to do - once every 4-40 msecs, depending on nr_running. I am personally leaning towards biting the bullet and doing this in v3.10, like the -rt tree this effort has been going on for too long - but the final word is up to you as usual. More technical details can be found in Documentation/timers/NO_HZ.txt" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) sched: Keep at least 1 tick per second for active dynticks tasks rcu: Fix full dynticks' dependency on wide RCU nocb mode nohz: Protect smp_processor_id() in tick_nohz_task_switch() nohz_full: Add documentation. cputime_nsecs: use math64.h for nsec resolution conversion helpers nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config nohz: Reduce overhead under high-freq idling patterns nohz: Remove full dynticks' superfluous dependency on RCU tree nohz: Fix unavailable tick_stop tracepoint in dynticks idle nohz: Add basic tracing nohz: Select wide RCU nocb for full dynticks nohz: Disable the tick when irq resume in full dynticks CPU nohz: Re-evaluate the tick for the new task after a context switch nohz: Prepare to stop the tick on irq exit nohz: Implement full dynticks kick nohz: Re-evaluate the tick from the scheduler IPI sched: New helper to prevent from stopping the tick in full dynticks sched: Kick full dynticks CPU that have more than one task enqueued. perf: New helper to prevent full dynticks CPUs from stopping tick perf: Kick full dynticks CPU if events rotation is needed ...
2013-05-04sched: Keep at least 1 tick per second for active dynticks tasksFrederic Weisbecker1-0/+7
The scheduler doesn't yet fully support environments with a single task running without a periodic tick. In order to ensure we still maintain the duties of scheduler_tick(), keep at least 1 tick per second. This makes sure that we keep the progression of various scheduler accounting and background maintainance even with a very low granularity. Examples include cpu load, sched average, CFS entity vruntime, avenrun and events such as load balancing, amongst other details handled in sched_class::task_tick(). This limitation will be removed in the future once we get these individual items to work in full dynticks CPUs. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-29nohz: Protect smp_processor_id() in tick_nohz_task_switch()Li Zhong1-3/+4
I saw following error when testing the latest nohz code on Power: [ 85.295384] BUG: using smp_processor_id() in preemptible [00000000] code: rsyslogd/3493 [ 85.295396] caller is .tick_nohz_task_switch+0x1c/0xb8 [ 85.295402] Call Trace: [ 85.295408] [c0000001fababab0] [c000000000012dc4] .show_stack+0x110/0x25c (unreliable) [ 85.295420] [c0000001fababba0] [c0000000007c4b54] .dump_stack+0x20/0x30 [ 85.295430] [c0000001fababc10] [c00000000044eb74] .debug_smp_processor_id+0xf4/0x124 [ 85.295438] [c0000001fababca0] [c0000000000d7594] .tick_nohz_task_switch+0x1c/0xb8 [ 85.295447] [c0000001fababd20] [c0000000000b9748] .finish_task_switch+0x13c/0x160 [ 85.295455] [c0000001fababdb0] [c0000000000bbe50] .schedule_tail+0x50/0x124 [ 85.295463] [c0000001fababe30] [c000000000009dc8] .ret_from_fork+0x4/0x54 The code below moves the test into local_irq_save/restore section to avoid the above complaint. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1367119558.6391.34.camel@ThinkPad-T5421.cn.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-26nohz: Reduce overhead under high-freq idling patternsIngo Molnar1-3/+4
One testbox of mine (Intel Nehalem, 16-way) uses MWAIT for its idle routine, which apparently can break out of its idle loop rather frequently, with high frequency. In that case NO_HZ_FULL=y kernels show high ksoftirqd overhead and constant context switching, because tick_nohz_stop_sched_tick() will, if delta_jiffies == 0, mis-identify this as a timer event - activating the TIMER_SOFTIRQ, which wakes up ksoftirqd. Fix this by treating delta_jiffies == 0 the same way we treat other short wakeups, delta_jiffies == 1. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-22nohz: Add basic tracingFrederic Weisbecker1-4/+15
It's not obvious to find out why the full dynticks subsystem doesn't always stop the tick: whether this is due to kthreads, posix timers, perf events, etc... These new tracepoints are here to help the user diagnose the failures and test this feature. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-22nohz: Re-evaluate the tick for the new task after a context switchFrederic Weisbecker1-0/+20
When a task is scheduled in, it may have some properties of its own that could make the CPU reconsider the need for the tick: posix cpu timers, perf events, ... So notify the full dynticks subsystem when a task gets scheduled in and re-check the tick dependency at this stage. This is done through a self IPI to avoid messing up with any current lock scenario. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-22nohz: Prepare to stop the tick on irq exitFrederic Weisbecker1-6/+25
Interrupt exit is a natural place to stop the tick: it happens after all events happening before and during the irq which are liable to update the dependency on the tick occured. Also it makes sure that any check on tick dependency is well ordered against dynticks kick IPIs. Bring in the infrastructure that performs the tick dependency checks on irq exit and shut it down if these checks show that we can do it safely. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-22nohz: Implement full dynticks kickFrederic Weisbecker1-4/+38
Implement the full dynticks kick that is performed from IPIs sent by various subsystems (scheduler, posix timers, ...) when they want to notify about a new event that may reconsider the dependency on the tick. Most of the time, such an event end up restarting the tick. (Part of the design with subsystems providing *_can_stop_tick() helpers suggested by Peter Zijlstra a while ago). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-22nohz: Re-evaluate the tick from the scheduler IPIFrederic Weisbecker1-1/+1
The scheduler IPI is used by the scheduler to kick full dynticks CPUs asynchronously when more than one task are running or when a new timer list timer is enqueued. This way the destination CPU can decide to restart the tick to handle this new situation. Now let's call that kick in the scheduler IPI. (Reusing the scheduler IPI rather than implementing a new IPI was suggested by Peter Zijlstra a while ago) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-21Merge branch 'timers/nohz-posix-timers-v2' of ↵Ingo Molnar1-0/+51
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/nohz Pull posix cpu timers handling on full dynticks from Frederic Weisbecker. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-19nohz: New option to default all CPUs in full dynticks rangeFrederic Weisbecker1-2/+21
Provide a new kernel config that defaults all CPUs to be part of the full dynticks range, except the boot one for timekeeping. This default setting is overriden by the nohz_full= boot option if passed by the user. This is helpful for those who don't need a finegrained range of full dynticks CPU and also for automated testing. Suggested-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-19nohz: Ensure full dynticks CPUs are RCU nocbsFrederic Weisbecker1-6/+16
We need full dynticks CPU to also be RCU nocb so that we don't have to keep the tick to handle RCU callbacks. Make sure the range passed to nohz_full= boot parameter is a subset of rcu_nocbs= The CPUs that fail to meet this requirement will be excluded from the nohz_full range. This is checked early in boot time, before any CPU has the opportunity to stop its tick. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-19nohz: Force boot CPU outside full dynticks rangeFrederic Weisbecker1-39/+15
The timekeeping job must be able to run early on boot because there may be some pre-SMP (and thus pre-initcalls ) components that rely on it. The IO-APIC is one such users as it tests the timer health by watching jiffies progression. Given that it happens before we know the initial online set, we can't rely on it to select a timekeeper. We need one before SMP time otherwise we simply crash on boot. To fix this and keep things simple for now, force the boot CPU outside of the full dynticks range in any case and do this early on kernel parameter parsing time. We might want a trickier solution later, expecially for aSMP architectures that need to assign housekeeping tasks to arbitrary low power CPUs. But it's still first pass KISS time for now. Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-18nohz: New APIs to re-evaluate the tick on full dynticks CPUsFrederic Weisbecker1-0/+51
Provide two new helpers in order to notify the full dynticks CPUs about some internal system changes against which they may reconsider the state of their tick. Some practical examples include: posix cpu timers, perf tick and sched clock tick. For now the notifying handler, implemented through IPIs, is a stub that will be implemented when we get the tick stop/restart infrastructure in. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-15nohz: Switch from "extended nohz" to "full nohz" based namingFrederic Weisbecker1-27/+27
"Extended nohz" was used as a naming base for the full dynticks API and Kconfig symbols. It reflects the fact the system tries to stop the tick in more places than just idle. But that "extended" name is a bit opaque and vague. Rename it to "full" makes it clearer what the system tries to do under this config: try to shutdown the tick anytime it can. The various constraints that prevent that to happen shouldn't be considered as fundamental properties of this feature but rather technical issues that may be solved in the future. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-03nohz: Print final full dynticks CPUs range on bootFrederic Weisbecker1-0/+10
Given that we apply a few restrictions on the full dynticks CPUs range (keep an online timekeeper oustide the range, then in the future have the range be an RCU nocb CPUs subset), let's print the final resulting range of full dynticks CPUs to the user so that he knows what's really going to run. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-03nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMONFrederic Weisbecker1-6/+6
We are planning to convert the dynticks Kconfig options layout into a choice menu. The user must be able to easily pick any of the following implementations: constant periodic tick, idle dynticks, full dynticks. As this implies a mutual exclusion, the two dynticks implementions need to converge on the selection of a common Kconfig option in order to ease the sharing of a common infrastructure. It would thus seem pretty natural to reuse CONFIG_NO_HZ to that end. It already implements all the idle dynticks code and the full dynticks depends on all that code for now. So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ. On the other hand we want to stay backward compatible: if CONFIG_NO_HZ is set in an older config file, we want to enable CONFIG_NO_HZ_IDLE by default. But we can't afford both at the same time or we run into a circular dependency: 1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select CONFIG_NO_HZ 2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE We might be able to support that from Kconfig/Kbuild but it may not be wise to introduce such a confusing behaviour. So to solve this, create a new CONFIG_NO_HZ_COMMON option which gathers the common code between idle and full dynticks (that common code for now is simply the idle dynticks code) and select it from their referring Kconfig. Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ to it for backward compatibility. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-03-25tick: Change log level of NOHZ: local_softirq_pending messageRado Vrbovsky1-2/+2
The "NOHZ: local_softirq_pending" message is a largely informational message. This makes extra work for customers that have a policy of investigating all kernel log messages logged at <= KERN_ERR log level. This patch sets the message to a different log level. [ tglx: Use pr_warn() ] Signed-off-by: Rado Vrbovsky <rvrbovsk@redhat.com> Cc: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/2037057938.893524.1360345050772.JavaMail.root@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-21nohz: Assign timekeeping duty to a CPU outside the full dynticks rangeFrederic Weisbecker1-2/+45
This way the full nohz CPUs can safely run with the tick stopped with a guarantee that somebody else is taking care of the jiffies and GTOD progression. Once the duty is attributed to a CPU, it won't change. Also that CPU can't enter into dyntick idle mode or be hot unplugged. This may later be improved from a power consumption POV. At least we should be able to share the duty amongst all CPUs outside the full dynticks range. Then the duty could even be shared with full dynticks CPUs when those can't stop their tick for any reason. But let's start with that very simple approach first. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> [fix have_nohz_full_mask offcase] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-21nohz: Basic full dynticks interfaceFrederic Weisbecker1-0/+62
For extreme usecases such as Real Time or HPC, having the ability to shutdown the tick when a single task runs on a CPU is a desired feature: * Reducing the amount of interrupts improves throughput for CPU-bound tasks. The CPU is less distracted from its real job, from an execution time and from the cache point of views. * This also improve latency response as we have less critical sections. Start with introducing a very simple interface to define full dynticks CPU: use a boot time option defined cpumask through the "nohz_extended=" kernel parameter. CPUs that are part of this range will have their tick shutdown whenever possible: provided they run a single task and they don't do kernel activity that require the periodic tick. These details will be later documented in Documentation/* An online CPU must be kept outside this range to handle the timekeeping. Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-02-28Merge branch 'release' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Highlights: - introduction of Dove thermal sensor driver. - introduction of Kirkwood thermal sensor driver. - introduction of intel_powerclamp thermal cooling device driver. - add interrupt and DT support for rcar thermal driver. - add thermal emulation support which allows platform thermal driver to do software/hardware emulation for thermal issues." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits) thermal: rcar: remove __devinitconst thermal: return an error on failure to register thermal class Thermal: rename thermal governor Kconfig option to avoid generic naming thermal: exynos: Use the new thermal trend type for quick cooling action. Thermal: exynos: Add support for temperature falling interrupt. Thermal: Dove: Add Themal sensor support for Dove. thermal: Add support for the thermal sensor on Kirkwood SoCs thermal: rcar: add Device Tree support thermal: rcar: remove machine_power_off() from rcar_thermal_notify() thermal: rcar: add interrupt support thermal: rcar: add read/write functions for common/priv data thermal: rcar: multi channel support thermal: rcar: use mutex lock instead of spin lock thermal: rcar: enable CPCTL to use hardware TSC deciding thermal: rcar: use parenthesis on macro Thermal: fix a build warning when CONFIG_THERMAL_EMULATION cleared Thermal: fix a wrong comment thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation PM: intel_powerclamp: off by one in start_power_clamp() thermal: exynos: Miscellaneous fixes to support falling threshold interrupt ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 00:07:20 +0000