summaryrefslogtreecommitdiff
path: root/include/xen/arm
AgeCommit message (Collapse)AuthorFilesLines
2023-09-19arm/xen: remove lazy mode related definitionsJuergen Gross1-12/+0
include/xen/arm/hypervisor.h contains definitions related to paravirt lazy mode, which are used nowhere in the code. All paravirt lazy mode related users are in x86 code, so remove the definitions on Arm side. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20230913113828.18421-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-12-05xen/virtio: Optimize the setup of "xen-grant-dma" devicesOleksandr Tyshchenko1-3/+1
This is needed to avoid having to parse the same device-tree several times for a given device. For this to work we need to install the xen_virtio_restricted_mem_acc callback in Arm's xen_guest_init() which is same callback as x86's PV and HVM modes already use and remove the manual assignment in xen_setup_dma_ops(). Also we need to split the code to initialize backend_domid into a separate function. Prior to current patch we parsed the device-tree three times: 1. xen_setup_dma_ops()->...->xen_is_dt_grant_dma_device() 2. xen_setup_dma_ops()->...->xen_dt_grant_init_backend_domid() 3. xen_virtio_mem_acc()->...->xen_is_dt_grant_dma_device() With current patch we parse the device-tree only once in xen_virtio_restricted_mem_acc()->...->xen_dt_grant_init_backend_domid() Other benefits are: - Not diverge from x86 when setting up Xen grant DMA ops - Drop several global functions Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20221025162004.8501-2-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06arm/xen: Assign xen-grant DMA ops for xen-grant DMA devicesOleksandr Tyshchenko1-1/+4
By assigning xen-grant DMA ops we will restrict memory access for passed device using Xen grant mappings. This is needed for using any virtualized device (e.g. virtio) in Xen guests in a safe manner. Please note, for the virtio devices the XEN_VIRTIO config should be enabled (it forces ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS). Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/1654197833-25362-9-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06arm/xen: Introduce xen_setup_dma_ops()Oleksandr Tyshchenko1-0/+15
This patch introduces new helper and places it in new header. The helper's purpose is to assign any Xen specific DMA ops in a single place. For now, we deal with xen-swiotlb DMA ops only. The one of the subsequent commits in current series will add xen-grant DMA ops case. Also re-use the xen_swiotlb_detect() check on Arm32. Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> [For arm64] Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1654197833-25362-2-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-04Merge tag 'for-linus-5.19-rc1b-tag' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer
2022-06-01xen: replace xen_remap() with memremap()Juergen Gross1-3/+0
xen_remap() is used to establish mappings for frames not under direct control of the kernel: for Xenstore and console ring pages, and for grant pages of non-PV guests. Today xen_remap() is defined to use ioremap() on x86 (doing uncached mappings), and ioremap_cache() on Arm (doing cached mappings). Uncached mappings for those use cases are bad for performance, so they should be avoided if possible. As all use cases of xen_remap() don't require uncached mappings (the mapped area is always physical RAM), a mapping using the standard WB cache mode is fine. As sparse is flagging some of the xen_remap() use cases to be not appropriate for iomem(), as the result is not annotated with the __iomem modifier, eliminate xen_remap() completely and replace all use cases with memremap() specifying the MEMREMAP_WB caching mode. xen_unmap() can be replaced with memunmap(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220530082634.6339-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-11swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on armChristoph Hellwig1-20/+0
swiotlb-xen uses very different ways to allocate coherent memory on x86 vs arm. On the former it allocates memory from the page allocator, while on the later it reuses the dma-direct allocator the handles the complexities of non-coherent DMA on arm platforms. Unfortunately the complexities of trying to deal with the two cases in the swiotlb-xen.c code lead to a bug in the handling of DMA_ATTR_NO_KERNEL_MAPPING on arm. With the DMA_ATTR_NO_KERNEL_MAPPING flag the coherent memory allocator does not actually allocate coherent memory, but just a DMA handle for some memory that is DMA addressable by the device, but which does not have to have a kernel mapping. Thus dereferencing the return value will lead to kernel crashed and memory corruption. Fix this by using the dma-direct allocator directly for arm, which works perfectly fine because on arm swiotlb-xen is only used when the domain is 1:1 mapped, and then simplifying the remaining code to only cater for the x86 case with DMA coherent device. Reported-by: Rahul Singh <Rahul.Singh@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rahul Singh <rahul.singh@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Rahul Singh <rahul.singh@arm.com>
2022-04-18swiotlb: merge swiotlb-xen initialization into swiotlbChristoph Hellwig1-1/+0
Reuse the generic swiotlb initialization for xen-swiotlb. For ARM/ARM64 this works trivially, while for x86 xen_swiotlb_fixup needs to be passed as the remap argument to swiotlb_init_remap/swiotlb_init_late. Note that the lower bound of the swiotlb size is changed to the smaller IO_TLB_MIN_SLABS based value with this patch, but that is fine as the 2MB value used in Xen before was just an optimization and is not the hard lower bound. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-11-02xen: allow pv-only hypercalls only with CONFIG_XEN_PVJuergen Gross1-15/+0
Put the definitions of the hypercalls usable only by pv guests inside CONFIG_XEN_PV sections. On Arm two dummy functions related to pv hypercalls can be removed. While at it remove the no longer supported tmem hypercall definition. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211028081221.2475-3-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-05-14xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.hStefano Stabellini1-1/+14
Move xen_swiotlb_detect to a static inline function to make it available to !CONFIG_XEN builds. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210512201823.1963-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mappedStefano Stabellini1-0/+7
Newer Xen versions expose two Xen feature flags to tell us if the domain is directly mapped or not. Only when a domain is directly mapped it makes sense to enable swiotlb-xen on ARM. Introduce a function on ARM to check the new Xen feature flags and also to deal with the legacy case. Call the function xen_swiotlb_detect. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210319200140.12512-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-10-07arm/arm64: xen: Fix to convert percpu address to gfn correctlyMasami Hiramatsu1-0/+3
Use per_cpu_ptr_to_phys() instead of virt_to_phys() for per-cpu address conversion. In xen_starting_cpu(), per-cpu xen_vcpu_info address is converted to gfn by virt_to_gfn() macro. However, since the virt_to_gfn(v) assumes the given virtual address is in linear mapped kernel memory area, it can not convert the per-cpu memory if it is allocated on vmalloc area. This depends on CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK. If it is enabled, the first chunk of percpu memory is linear mapped. In the other case, that is allocated from vmalloc area. Moreover, if the first chunk of percpu has run out until allocating xen_vcpu_info, it will be allocated on the 2nd chunk, which is based on kernel memory or vmalloc memory (depends on CONFIG_NEED_PER_CPU_KM). Without this fix and kernel configured to use vmalloc area for the percpu memory, the Dom0 kernel will fail to boot with following errors. [ 0.466172] Xen: initializing cpu0 [ 0.469601] ------------[ cut here ]------------ [ 0.474295] WARNING: CPU: 0 PID: 1 at arch/arm64/xen/../../arm/xen/enlighten.c:153 xen_starting_cpu+0x160/0x180 [ 0.484435] Modules linked in: [ 0.487565] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #4 [ 0.493895] Hardware name: Socionext Developer Box (DT) [ 0.499194] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.504836] pc : xen_starting_cpu+0x160/0x180 [ 0.509263] lr : xen_starting_cpu+0xb0/0x180 [ 0.513599] sp : ffff8000116cbb60 [ 0.516984] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.522366] x27: 0000000000000000 x26: 0000000000000000 [ 0.527754] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.533129] x23: 0000000000000000 x22: 0000000000000000 [ 0.538511] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.543892] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.549274] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.554655] x15: ffffffffffffffff x14: 0720072007200720 [ 0.560037] x13: 0720072007200720 x12: 0720072007200720 [ 0.565418] x11: 0720072007200720 x10: 0720072007200720 [ 0.570801] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.576182] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.581564] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.586945] x3 : 0000000000000000 x2 : ffff80000abec000 [ 0.592327] x1 : 000000000000002f x0 : 0000800000000000 [ 0.597716] Call trace: [ 0.600232] xen_starting_cpu+0x160/0x180 [ 0.604309] cpuhp_invoke_callback+0xac/0x640 [ 0.608736] cpuhp_issue_call+0xf4/0x150 [ 0.612728] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.618030] __cpuhp_setup_state+0x84/0xf8 [ 0.622192] xen_guest_init+0x324/0x364 [ 0.626097] do_one_initcall+0x54/0x250 [ 0.630003] kernel_init_freeable+0x12c/0x2c8 [ 0.634428] kernel_init+0x1c/0x128 [ 0.637988] ret_from_fork+0x10/0x18 [ 0.641635] ---[ end trace d95b5309a33f8b27 ]--- [ 0.646337] ------------[ cut here ]------------ [ 0.651005] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:158! [ 0.657697] Internal error: Oops - BUG: 0 [#1] SMP [ 0.662548] Modules linked in: [ 0.665676] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.9.0-rc4+ #4 [ 0.673398] Hardware name: Socionext Developer Box (DT) [ 0.678695] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.684338] pc : xen_starting_cpu+0x178/0x180 [ 0.688765] lr : xen_starting_cpu+0x144/0x180 [ 0.693188] sp : ffff8000116cbb60 [ 0.696573] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.701955] x27: 0000000000000000 x26: 0000000000000000 [ 0.707344] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.712718] x23: 0000000000000000 x22: 0000000000000000 [ 0.718107] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.723481] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.728863] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.734245] x15: ffffffffffffffff x14: 0720072007200720 [ 0.739626] x13: 0720072007200720 x12: 0720072007200720 [ 0.745008] x11: 0720072007200720 x10: 0720072007200720 [ 0.750390] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.755771] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.761153] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.766534] x3 : 0000000000000000 x2 : 00000000deadbeef [ 0.771916] x1 : 00000000deadbeef x0 : ffffffffffffffea [ 0.777304] Call trace: [ 0.779819] xen_starting_cpu+0x178/0x180 [ 0.783898] cpuhp_invoke_callback+0xac/0x640 [ 0.788325] cpuhp_issue_call+0xf4/0x150 [ 0.792317] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.797619] __cpuhp_setup_state+0x84/0xf8 [ 0.801779] xen_guest_init+0x324/0x364 [ 0.805683] do_one_initcall+0x54/0x250 [ 0.809590] kernel_init_freeable+0x12c/0x2c8 [ 0.814016] kernel_init+0x1c/0x128 [ 0.817583] ret_from_fork+0x10/0x18 [ 0.821226] Code: d0006980 f9427c00 cb000300 17ffffea (d4210000) [ 0.827415] ---[ end trace d95b5309a33f8b28 ]--- [ 0.832076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.839815] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/160196697165.60224.17470743378683334995.stgit@devnote2 Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27arm/xen: Add misuse warning to virt_to_gfnSimon Leiner1-1/+5
As virt_to_gfn uses virt_to_phys, it will return invalid addresses when used with vmalloc'd addresses. This patch introduces a warning, when virt_to_gfn is used in this way. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-2-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport1-1/+1
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport1-1/+1
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-11swiotlb-xen: simplify cache maintainanceChristoph Hellwig1-63/+0
Now that we know we always have the dma-noncoherent.h helpers available if we are on an architecture with support for non-coherent devices, we can just call them directly, and remove the calls to the dma-direct routines, including the fact that we call the dma_direct_map_page routines but ignore the value returned from it. Instead we now have Xen wrappers for the arch_sync_dma_for_{device,cpu} helpers that call the special Xen versions of those routines for foreign pages. Note that the new helpers get the physical address passed in addition to the dma address to avoid another translation for the local cache maintainance. The pfn_valid checks remain on the dma address as in the old code, even if that looks a little funny. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-09-11swiotlb-xen: use the same foreign page check everywhereChristoph Hellwig1-22/+9
xen_dma_map_page uses a different and more complicated check for foreign pages than the other three cache maintainance helpers. Switch it to the simpler pfn_valid method a well, and document the scheme with a single improved comment in xen_dma_map_page. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: remove xen_dma_opsChristoph Hellwig1-2/+0
arm and arm64 can just use xen_swiotlb_dma_ops directly like x86, no need for a pointer indirection. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: consolidate page-coherent.hChristoph Hellwig1-0/+80
Shared the duplicate arm/arm64 code in include/xen/arm/page-coherent.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-01-23arm64/xen: fix xen-swiotlb cache flushingChristoph Hellwig1-94/+3
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA DMA mapping operations stored in the struct device arch data. Switching arm64 to use the direct calls for the merged DMA direct / swiotlb code broke this scheme. Replace the indirect calls with direct-calls in xen-swiotlb as well to fix this problem. Fixes: 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct") Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-19xen, arm64: drop dummy lookup_address()Tycho Andersen1-10/+0
This is unused, and conflicts with the definition that we'll add for XPFO. Signed-off-by: Tycho Andersen <tycho@docker.com> Reviewed-by: Julien Grall <julien.grall@arm.com> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: Juergen Gross <jgross@suse.com> CC: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-06-08xen: fix HYPERVISOR_dm_op() prototypeSergey Dyasli1-1/+4
Change the third parameter to be the required struct xen_dm_op_buf * instead of a generic void * (which blindly accepts any pointer). Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_opsStefano Stabellini1-10/+10
Now that __generic_dma_ops is a xen specific function, rename it to xen_get_dma_ops. Change all the call sites appropriately. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: linux@armlinux.org.uk CC: catalin.marinas@arm.com CC: will.deacon@arm.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Julien Grall <julien.grall@arm.com>
2017-05-02xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."Stefano Stabellini1-0/+8
The following commit: commit 815dd18788fe0d41899f51b91d0560279cf16b0d Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Fri Jan 20 13:04:04 2017 -0800 treewide: Consolidate get_dma_ops() implementations rearranges get_dma_ops in a way that xen_dma_ops are not returned when running on Xen anymore, dev->dma_ops is returned instead (see arch/arm/include/asm/dma-mapping.h:get_arch_dma_ops and include/linux/dma-mapping.h:get_dma_ops). Fix the problem by storing dev->dma_ops in dev_archdata, and setting dev->dma_ops to xen_dma_ops. This way, xen_dma_ops is returned naturally by get_dma_ops. The Xen code can retrieve the original dev->dma_ops from dev_archdata when needed. It also allows us to remove __generic_dma_ops from common headers. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Julien Grall <julien.grall@arm.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> [4.11+] CC: linux@armlinux.org.uk CC: catalin.marinas@arm.com CC: will.deacon@arm.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Julien Grall <julien.grall@arm.com>
2017-02-25Merge tag 'for-next-dma_ops' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-14xen/privcmd: Add IOCTL_PRIVCMD_DM_OPPaul Durrant1-0/+1
Recently a new dm_op[1] hypercall was added to Xen to provide a mechanism for restricting device emulators (such as QEMU) to a limited set of hypervisor operations, and being able to audit those operations in the kernel of the domain in which they run. This patch adds IOCTL_PRIVCMD_DM_OP as gateway for __HYPERVISOR_dm_op. NOTE: There is no requirement for user-space code to bounce data through locked memory buffers (as with IOCTL_PRIVCMD_HYPERCALL) since privcmd has enough information to lock the original buffers directly. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=524a98c2 Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche1-1/+1
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-02arm/arm64: xen: Move shared architecture headers to include/xen/armMarc Zyngier5-0/+431
ARM and arm64 Xen ports share a number of headers, leading to packaging issues when these headers needs to be exported, as it breaks the reasonable requirement that an architecture port has self-contained headers. Fix the issue by moving the 5 header files to include/xen/arm, and keep local placeholders to include the relevant files. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 00:05:02 +0000