summaryrefslogtreecommitdiff
path: root/include/soc
AgeCommit message (Collapse)AuthorFilesLines
2024-08-16net: mscc: ocelot: treat 802.1ad tagged traffic as 802.1Q-untaggedVladimir Oltean1-0/+2
I was revisiting the topic of 802.1ad treatment in the Ocelot switch [0] and realized that not only is its basic VLAN classification pipeline improper for offloading vlan_protocol 802.1ad bridges, but also improper for offloading regular 802.1Q bridges already. Namely, 802.1ad-tagged traffic should be treated as VLAN-untagged by bridged ports, but this switch treats it as if it was 802.1Q-tagged with the same VID as in the 802.1ad header. This is markedly different to what the Linux bridge expects; see the "other_tpid()" function in tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh. An idea came to me that the VCAP IS1 TCAM is more powerful than I'm giving it credit for, and that it actually overwrites the classified VID before the VLAN Table lookup takes place. In other words, it can be used even to save a packet from being dropped on ingress due to VLAN membership. Add a sophisticated TCAM rule hardcoded into the driver to force the switch to behave like a Linux bridge with vlan_filtering 1 vlan_protocol 802.1Q. Regarding the lifetime of the filter: eventually the bridge will disappear, and vlan_filtering on the port will be restored to 0 for standalone mode. Then the filter will be deleted. [0]: https://lore.kernel.org/netdev/20201009122947.nvhye4hvcha3tljh@skbuf/ Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16net: mscc: ocelot: serialize access to the injection/extraction groupsVladimir Oltean1-0/+9
As explained by Horatiu Vultur in commit 603ead96582d ("net: sparx5: Add spinlock for frame transmission from CPU") which is for a similar hardware design, multiple CPUs can simultaneously perform injection or extraction. There are only 2 register groups for injection and 2 for extraction, and the driver only uses one of each. So we'd better serialize access using spin locks, otherwise frame corruption is possible. Note that unlike in sparx5, FDMA in ocelot does not have this issue because struct ocelot_fdma_tx_ring already contains an xmit_lock. I guess this is mostly a problem for NXP LS1028A, as that is dual core. I don't think VSC7514 is. So I'm blaming the commit where LS1028A (aka the felix DSA driver) started using register-based packet injection and extraction. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16net: mscc: ocelot: use ocelot_xmit_get_vlan_info() also for FDMA and ↵Vladimir Oltean1-1/+2
register injection Problem description ------------------- On an NXP LS1028A (felix DSA driver) with the following configuration: - ocelot-8021q tagging protocol - VLAN-aware bridge (with STP) spanning at least swp0 and swp1 - 8021q VLAN upper interfaces on swp0 and swp1: swp0.700, swp1.700 - ptp4l on swp0.700 and swp1.700 we see that the ptp4l instances do not see each other's traffic, and they all go to the grand master state due to the ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES condition. Jumping to the conclusion for the impatient ------------------------------------------- There is a zero-day bug in the ocelot switchdev driver in the way it handles VLAN-tagged packet injection. The correct logic already exists in the source code, in function ocelot_xmit_get_vlan_info() added by commit 5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit"). But it is used only for normal NPI-based injection with the DSA "ocelot" tagging protocol. The other injection code paths (register-based and FDMA-based) roll their own wrong logic. This affects and was noticed on the DSA "ocelot-8021q" protocol because it uses register-based injection. By moving ocelot_xmit_get_vlan_info() to a place that's common for both the DSA tagger and the ocelot switch library, it can also be called from ocelot_port_inject_frame() in ocelot.c. We need to touch the lines with ocelot_ifh_port_set()'s prototype anyway, so let's rename it to something clearer regarding what it does, and add a kernel-doc. ocelot_ifh_set_basic() should do. Investigation notes ------------------- Debugging reveals that PTP event (aka those carrying timestamps, like Sync) frames injected into swp0.700 (but also swp1.700) hit the wire with two VLAN tags: 00000000: 01 1b 19 00 00 00 00 01 02 03 04 05 81 00 02 bc ~~~~~~~~~~~ 00000010: 81 00 02 bc 88 f7 00 12 00 2c 00 00 02 00 00 00 ~~~~~~~~~~~ 00000020: 00 00 00 00 00 00 00 00 00 00 00 01 02 ff fe 03 00000030: 04 05 00 01 00 04 00 00 00 00 00 00 00 00 00 00 00000040: 00 00 The second (unexpected) VLAN tag makes felix_check_xtr_pkt() -> ptp_classify_raw() fail to see these as PTP packets at the link partner's receiving end, and return PTP_CLASS_NONE (because the BPF classifier is not written to expect 2 VLAN tags). The reason why packets have 2 VLAN tags is because the transmission code treats VLAN incorrectly. Neither ocelot switchdev, nor felix DSA, declare the NETIF_F_HW_VLAN_CTAG_TX feature. Therefore, at xmit time, all VLANs should be in the skb head, and none should be in the hwaccel area. This is done by: static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb, netdev_features_t features) { if (skb_vlan_tag_present(skb) && !vlan_hw_offload_capable(features, skb->vlan_proto)) skb = __vlan_hwaccel_push_inside(skb); return skb; } But ocelot_port_inject_frame() handles things incorrectly: ocelot_ifh_port_set(ifh, port, rew_op, skb_vlan_tag_get(skb)); void ocelot_ifh_port_set(struct sk_buff *skb, void *ifh, int port, u32 rew_op) { (...) if (vlan_tag) ocelot_ifh_set_vlan_tci(ifh, vlan_tag); (...) } The way __vlan_hwaccel_push_inside() pushes the tag inside the skb head is by calling: static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb) { skb->vlan_present = 0; } which does _not_ zero out skb->vlan_tci as seen by skb_vlan_tag_get(). This means that ocelot, when it calls skb_vlan_tag_get(), sees (and uses) a residual skb->vlan_tci, while the same VLAN tag is _already_ in the skb head. The trivial fix for double VLAN headers is to replace the content of ocelot_ifh_port_set() with: if (skb_vlan_tag_present(skb)) ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb)); but this would not be correct either, because, as mentioned, vlan_hw_offload_capable() is false for us, so we'd be inserting dead code and we'd always transmit packets with VID=0 in the injection frame header. I can't actually test the ocelot switchdev driver and rely exclusively on code inspection, but I don't think traffic from 8021q uppers has ever been injected properly, and not double-tagged. Thus I'm blaming the introduction of VLAN fields in the injection header - early driver code. As hinted at in the early conclusion, what we _want_ to happen for VLAN transmission was already described once in commit 5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit"). ocelot_xmit_get_vlan_info() intends to ensure that if the port through which we're transmitting is under a VLAN-aware bridge, the outer VLAN tag from the skb head is stripped from there and inserted into the injection frame header (so that the packet is processed in hardware through that actual VLAN). And in all other cases, the packet is sent with VID=0 in the injection frame header, since the port is VLAN-unaware and has logic to strip this VID on egress (making it invisible to the wire). Fixes: 08d02364b12f ("net: mscc: fix the injection header") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-19Merge tag 'sound-6.11-rc1' of ↵Linus Torvalds1-3/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Lots of changes in this cycle, but mostly for cleanups and refactoring. Significant amount of changes are about DT schema conversions for ASoC at this time while we see other usual suspects, too. Some highlights below: Core: - Re-introduction of PCM sync ID support API - MIDI2 time-base extension in ALSA sequencer API ASoC: - Syncing of features between simple-audio-card and the two audio-graph cards - Support for specifying the order of operations for components within cards to allow quirking for unusual systems - Lots of DT schema conversions - Continued SOF/Intel updates for topology, SoundWire, IPC3/4 - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242 HD-audio: - More quirks, Intel PantherLake support, senarytech codec support - Refactoring of Cirrus codec component-binding Others: - ALSA control kselftest improvements, and fixes for input value checks in various drivers" * tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits) kselftest/alsa: Log the PCM ID in pcm-test kselftest/alsa: Use card name rather than number in test names ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360 ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop ALSA: seq: ump: Skip useless ports for static blocks ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused ALSA: usb: Use BIT() for bit values ALSA: usb: Fix UBSAN warning in parse_audio_unit() ALSA: hda/realtek: Enable headset mic on Positivo SU C1400 ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema ASoC: cs530x: Remove bclk from private structure ASoC: cs530x: Calculate proper bclk rate using TDM ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema firmware: cs_dsp: Rename fw_ver to wmfw_ver firmware: cs_dsp: Clarify wmfw format version log message firmware: cs_dsp: Make wmfw and bin filename arguments const char * ...
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent1-1/+1
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04soc: fsl: cpm1: qmc: Introduce qmc_chan_count_phandles()Herve Codina1-0/+2
No function in the QMC API is available to get the number of phandles present in a phandle list. Fill this lack introducing qmc_chan_count_phandles(). Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://patch.msgid.link/20240701113038.55144-9-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-04soc: fsl: cpm1: qmc: Introduce functions to get a channel from a phandle listHerve Codina1-3/+22
qmc_chan_get_byphandle() and the resource managed version retrieve a channel from a simple phandle. Extend the API and introduce qmc_chan_get_byphandles_index() and the resource managed version in order to retrieve a channel from a phandle list using the provided index to identify the phandle in the list. Also update qmc_chan_get_byphandle() and the resource managed version to use qmc_chan_get_byphandles_index() and so avoid code duplication. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://patch.msgid.link/20240701113038.55144-8-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-18Merge tag 'clk-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "I'm actually surprised this time. There aren't any new Qualcomm SoC clk drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits) clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies dt-bindings: clocks: stm32mp25: add access-controllers description clock, reset: microchip: move all mpfs reset code to the reset subsystem clk: samsung: gs101: drop unused HSI2 clock parent data clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock dt-bindings: clock: fixed: Define a preferred node name clk: meson: s4: fix module autoloading clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 ...
2024-05-13Merge tag 'keys-trusted-next-6.10-rc1' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull trusted keys updates from Jarkko Sakkinen: "This contains a new key type for the Data Co-Processor (DCP), which is an IP core built into many NXP SoCs such as i.mx6ull" * tag 'keys-trusted-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: docs: trusted-encrypted: add DCP as new trust source docs: document DCP-backed trusted keys kernel params MAINTAINERS: add entry for DCP-based trusted keys KEYS: trusted: Introduce NXP DCP-backed trusted keys KEYS: trusted: improve scalability of trust source config crypto: mxs-dcp: Add support for hardware-bound keys
2024-05-09crypto: mxs-dcp: Add support for hardware-bound keysDavid Gstir1-0/+20
DCP (Data Co-Processor) is able to derive private keys for a fused random seed, which can be referenced by handle but not accessed by the CPU. Similarly, DCP is able to store arbitrary keys in four dedicated key slots located in its secure memory area (internal SRAM). These keys can be used to perform AES encryption. Expose these derived keys and key slots through the crypto API via their handle. The main purpose is to add DCP-backed trusted keys. Other use cases are possible too (see similar existing paes implementations), but these should carefully be evaluated as e.g. enabling AF_ALG will give userspace full access to use keys. In scenarios with untrustworthy userspace, this will enable en-/decryption oracles. Co-developed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at> Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: David Gstir <david@sigma-star.at> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-08clk, reset: microchip: mpfs: fix incorrect preprocessor conditionsConor Dooley1-2/+2
While moving all the reset code in the PolarFire SoC clock driver to the reset subsystem, I removed an `#if IS_ENABLED(RESET_CONTROLLER)` from the driver and moved it to the header, however this was not the correct thing to do. In the driver such a condition over-eagerly provided a complete implementation for mpfs_reset_{read,write}() when the reset subsystem was enabled without the PolarFire SoC reset driver, but in the header it meant that when the subsystem was enabled and the driver was not, no implementation for mpfs_reset_controller_register() was provided. Fix the condition so that the stub implementation of mpfs_reset_controller_register() is used when the reset driver is disabled. Fixes: 098c290a490d ("clock, reset: microchip: move all mpfs reset code to the reset subsystem") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405082259.44DzHvaN-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202405082200.tBrEs5CZ-lkp@intel.com/ Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240508-unabashed-cheese-8f645b4f69ba@spud Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-05-07clock, reset: microchip: move all mpfs reset code to the reset subsystemConor Dooley1-5/+5
Stephen and Philipp, while reviewing patches, said that all of the aux device creation and the register read/write code could be moved to the reset subsystem, leaving the clock driver with no implementations of reset_* functions at all. Move them. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240424-strangle-sharpener-34755c5e6e3e@spud Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-21soc: qcom: rpmh-rsc: Enhance check for VRM in-flight requestMaulik Shah1-1/+9
Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned addresses associated with it. These control voltage, enable state, mode, and in legacy targets, voltage headroom. The current in-flight request checking logic looks for exact address matches. Requests for different addresses of the same RPMh resource as thus not detected as in-flight. Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight request check for VRM requests by ignoring the address offset. This ensures that only one request is allowed to be in-flight for a given VRM resource. This is needed to avoid scenarios where request commands are carried out by RPMh hardware out-of-order leading to LDO regulator over-current protection triggering. Fixes: 658628e7ef78 ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-21Merge tag 'char-misc-6.9-rc1' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ...
2024-03-04Merge tag 'qcom-drivers-for-6.9' of ↵Arnd Bergmann2-23/+2
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.9 This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver. The Qualcomm SMEM no longer acquires the hwspinlock during the "get" operation, to improve the system behavior during the recovery of a remoteproc that crashed with the hwspinlock held. The Qualcomm Always On Subsystem (AOSS) message protocol driver gains tracepoints, printf annotation, and a debugfs interface is introduced for tweaking system properties during development and debugging. The Qualcomm socinfo driver gains data for SM8475, QCM8550 and QCS8550 platforms, and the PM2250 is renamed to PM4125. Support for controlling the voltage regulator in SPM/SAW2 is introduced. The gfx.lvl power-domain is dropped for SA8540P, as this resource was incorrectly inherited from SC8280XP. Additionally some code cleanup improvements is introduced across APR, LLCC, SMP2P and SPM. * tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits) dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible soc: qcom: spm: add support for voltage regulator soc: qcom: spm: remove driver-internal structures from the driver API dt-bindings: soc: qcom: qcom,saw2: define optional regulator node dt-bindings: soc: qcom: qcom,saw2: add missing compatible strings dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml soc: qcom: llcc: Check return value on Broadcast_OR reg read soc: qcom: socinfo: Add Soc IDs for SM8475 family dt-bindings: arm: qcom,ids: Add IDs for SM8475 family soc: qcom: apr: make aprbus const dt-bindings: soc: qcom: qcom,pmic-glink: document X1E80100 compatible soc: qcom: add QCOM PBS driver dt-bindings: soc: qcom: Add qcom,pbs bindings pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl soc: qcom: socinfo: rename PM2250 to PM4125 soc: qcom: aoss: Add tracepoints in qmp_send() soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550 soc: qcom: aoss: Add debugfs interface for sending messages soc: qcom: smem: remove hwspinlock from item get routine ... Link: https://lore.kernel.org/r/20240225030612.480241-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-26interconnect: constify of_phandle_args in xlateKrzysztof Kozlowski1-3/+4
The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> # Tegra Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alim Akhtar <alim.akhtar@samsung.com> # Samsung Link: https://lore.kernel.org/r/20240220072213.35779-1-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2024-02-16soc: qcom: spm: remove driver-internal structures from the driver APIDmitry Baryshkov1-22/+1
Move internal SPM driver structures to the driver itself, removing them from the public API. The CPUidle driver doesn't use them at all. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-4-0472ec237f49@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-01soc/tegra: fuse: Add support for Tegra241Kartik1-0/+1
Add support for Tegra241 which use ACPI boot. Signed-off-by: Kartik <kkartik@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-02-01soc/tegra: pmc: Remove some old and deprecated functions and constantsChristophe JAILLET1-18/+0
These TEGRA_IO_RAIL_... functions and constants have been deprecated in commit 21b499105178 ("soc/tegra: pmc: Add I/O pad voltage support") in 2016-11. There seems to be no users since kernel 4.16. Remove them now. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-01-27soc: qcom: socinfo: rename PM2250 to PM4125Dmitry Baryshkov1-1/+1
It seems, the only actual mentions of PM2250 can be found are related to the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a PMIC name. Rename PM2250 to PM4125 to follow the documentation. Fixes: 082f9bc60f33 ("soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs") Fixes: 112d96fd2927 ("soc: qcom: socinfo: Add some PMICs") Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240128-pm2250-pm4125-rename-v2-1-d51987e9f83a@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-17Merge tag 'mfd-next-6.8' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd updates from Lee Jones: "New Device Support: - Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC Fix-ups: - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Device Tree binding adaptions/conversions/creation - Improve error handling; return proper error values, simplify, avoid duplicates, etc - Continue work to remove superfluous platform .remove() call-backs - Move some exported symbols into private namespaces - Clean-up and staticify PM related operations - Trivial; spelling, whitespace, clean-ups, etc - Fix include lists; alphabetise, remove unused, explicitly add used Bug Fixes: - Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can co-exist - Ensure debugfs register view is correctly presented - Fix ordering and value issues in current use of clk_register_fractional_divider() - Repair Kconfig based dependency lists" * tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) mfd: ti_am335x_tscadc: Fix TI SoC dependencies dt-bindings: mfd: sprd: Add support for UMS9620 mfd: ab8500-sysctrl: Drop ancient charger mfd: intel-lpss: Fix the fractional clock divider flags mfd: tps6594: Add null pointer check to tps6594_device_init() dt-bindings: mfd: pm8008: Clean up example node names dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference mfd: da9062: Simplify obtaining I2C match data mfd: syscon: Fix null pointer dereference in of_syscon_register() mfd: intel-lpss: Don't fail probe on success of pci_alloc_irq_vectors() mfd: twl6030-irq: Revert to use of_match_device() mfd: cs42l43: Correct order of include files to be alphabetical mfd: cs42l43: Correct SoundWire port list mfd: Fix a few spelling mistakes in PMIC header file comments mfd: intel-lpss: Provide Intel LPSS PM ops structure mfd: intel-lpss: Move exported symbols to INTEL_LPSS namespace mfd: intel-lpss: Adjust header inclusions mfd: intel-lpss: Use device_get_match_data() ...
2023-12-22Merge tag 'memory-controller-drv-6.8' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.8 Few improvements for Tegra Memory Controller: Override the SID programming in the device, if firmware or bootloader left it in bypass mode, e.g. after resuming from suspend. Skip prorgamming the SID, if given Memory Controller client does not support it. * tag 'memory-controller-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: tegra: Protect SID override call under CONFIG_IOMMU_API memory: tegra: Skip SID programming if SID registers aren't set memory: tegra: Add SID override programming for MC clients Link: https://lore.kernel.org/r/20231213061523.4803-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22Merge tag 'riscv-soc-drivers-for-v6.8' of ↵Arnd Bergmann1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V SoC drivers for v6.8 There's only one set of changes here, the addition of "Auto Update" support for PolarFire SoC. Auto Update is one of the ways that the FPGA bitstream can be updated, and the only one suitable for use from Linux as it does not immediately initiate a reboot when started. The driver was not accepted in the FPGA manager subsystem as the update only occurs after a reboot and makes no use of the FPGA manager framework. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: MAINTAINERS: add auto-update driver to mpfs entry firmware: microchip: Replace of_device.h with explicit include firmware: microchip: add PolarFire SoC Auto Update support soc: microchip: mpfs: add auto-update subdev to system controller soc: microchip: mpfs: print service status in warning message soc: microchip: mpfs: enable access to the system controller's flash dt-bindings: soc: microchip: add a property for system controller flash firmware_loader: Expand Firmware upload error codes with firmware invalid error Link: https://lore.kernel.org/r/20231221-droop-unblock-81e4fe14acee@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-12soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtimeHerve Codina1-0/+10
Introduce qmc_chan_{get,set}_ts_info() function to allow timeslots modification at runtime. The modification is provided using qmc_chan_set_ts_info() and will be applied on next qmc_chan_start(). qmc_chan_set_ts_info() must be called with the channel rx and/or tx stopped. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/20231205152116.122512-18-herve.codina@bootlin.com
2023-12-12soc: fsl: cpm1: qmc: Add support for child devicesHerve Codina1-0/+2
QMC child devices support is needed to avoid orphan DT nodes that use a simple DT phandle to reference a QMC channel. Allow to instantiate child devices and also extend the API to get the qmc_chan using a child device. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20231205152116.122512-7-herve.codina@bootlin.com
2023-12-12soc: fsl: cpm1: qmc: Extend the API to provide Rx statusHerve Codina1-1/+14
In HDLC mode, some status flags related to the data read transfer can be set by the hardware and need to be known by a QMC consumer for further analysis. Extend the API in order to provide these transfer status flags at the read complete() call. In TRANSPARENT mode, these flags have no meaning. Keep only one read complete() API and update the consumers working in transparent mode. In this case, the newly introduced flags parameter is simply unused. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/20231205152116.122512-5-herve.codina@bootlin.com
2023-12-07mfd: qcom-spmi-pmic: Add support for PM8937Dang Huynh1-0/+1
Add the subtype and compatible strings for PM8937. The PM8937 is found in various SoCs, including MSM8917, MSM8937, MSM8940 and APQ variants. Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> Link: https://lore.kernel.org/r/20231121-pm8937-v2-1-b0171ab62075@riseup.net Signed-off-by: Lee Jones <lee@kernel.org>
2023-12-06soc: microchip: mpfs: enable access to the system controller's flashConor Dooley1-0/+2
The system controller has a flash that contains images used to reprogram the FPGA using IAP (In-Application Programming). Introduce a function that allows a driver with a reference to the system controller to get one to a flash device attached to it. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-11-21memory: tegra: Add SID override programming for MC clientsAshish Mhetre1-0/+1
For some devices the bootloader/firmware may set up the device in bypass. Memory clients like display needs kernel to program SID after resume because bootloader/firmware programs the SID of display device to bypass. In order to make sure that kernel IOMMU mappings for these devices work after resume, add SID override programming support for all memory clients on memory controller resume. This partially reverts 'commit ef86b2c2807f ("memory: tegra: Remove clients SID override programming")' Signed-off-by: Ashish Mhetre <amhetre@nvidia.com> Link: https://lore.kernel.org/r/20231107112713.21399-1-amhetre@nvidia.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-11-09Merge tag 'iommu-updates-v6.7' of ↵Linus Torvalds1-26/+0
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core changes: - Make default-domains mandatory for all IOMMU drivers - Remove group refcounting - Add generic_single_device_group() helper and consolidate drivers - Cleanup map/unmap ops - Scaling improvements for the IOVA rcache depot - Convert dart & iommufd to the new domain_alloc_paging() ARM-SMMU: - Device-tree binding update: - Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC - SMMUv2: - Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs - SMMUv3: - Large refactoring of the context descriptor code to move the CD table into the master, paving the way for '->set_dev_pasid()' support on non-SVA domains - Minor cleanups to the SVA code Intel VT-d: - Enable debugfs to dump domain attached to a pasid - Remove an unnecessary inline function AMD IOMMU: - Initial patches for SVA support (not complete yet) S390 IOMMU: - DMA-API conversion and optimized IOTLB flushing And some smaller fixes and improvements" * tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits) iommu/dart: Remove the force_bypass variable iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging() iommu/dart: Convert to domain_alloc_paging() iommu/dart: Move the blocked domain support to a global static iommu/dart: Use static global identity domains iommufd: Convert to alloc_domain_paging() iommu/vt-d: Use ops->blocked_domain iommu/vt-d: Update the definition of the blocking domain iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain Revert "iommu/vt-d: Remove unused function" iommu/amd: Remove DMA_FQ type from domain allocation path iommu: change iommu_map_sgtable to return signed values iommu/virtio: Add __counted_by for struct viommu_request and use struct_size() iommu/vt-d: debugfs: Support dumping a specified page table iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid} iommu/vt-d: debugfs: Dump entry pointing to huge page iommu/vt-d: Remove unused function iommu/arm-smmu-v3-sva: Remove bond refcount iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle iommu/arm-smmu-v3: Rename cdcfg to cd_table ...
2023-11-01Merge tag 'docs-6.7' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "The number of commits for documentation is not huge this time around, but there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations - The much-discussed documentation of the confidential-computing threat model - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn - A large traditional-Chinese documentation update - A new document on backporting and conflict resolution - Some kernel-doc and Sphinx fixes Plus the usual smattering of smaller updates and typo fixes" * tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits) scripts/kernel-doc: Fix the regex for matching -Werror flag docs: backporting: address feedback Documentation: driver-api: pps: Update PPS generator documentation speakup: Document USB support doc: blk-ioprio: Bring the doc in line with the implementation docs: usb: fix reference to nonexistent file in UVC Gadget docs: doc-guide: mention 'make refcheckdocs' Documentation: fix typo in dynamic-debug howto scripts/kernel-doc: match -Werror flag strictly Documentation/sphinx: Remove the repeated word "the" in comments. docs: sparse: add SPDX-License-Identifier docs/zh_CN: Add subsystem-apis Chinese translation docs/zh_TW: update contents for zh_TW docs: submitting-patches: encourage direct notifications to commenters docs: add backporting and conflict resolution document docs: move riscv under arch docs: update link to powerpc/vmemmap_dedup.rst mm/memory-hotplug: fix typo in documentation docs: move powerpc under arch PCI: Update the devres documentation regarding to pcim_*() ...
2023-11-01Merge tag 'soc-drivers-6.7' of ↵Linus Torvalds2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper" * tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits) soc: qcom: pmic_glink_altmode: Print return value on error firmware: qcom: scm: remove unneeded 'extern' specifiers firmware: qcom: scm: add a missing forward declaration for struct device firmware: qcom: move Qualcomm code into its own directory soc: samsung: exynos-chipid: Convert to platform remove callback returning void soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size() soc: qcom: pmic_glink: fix connector type to be DisplayPort soc: ti: k3-socinfo: Avoid overriding return value soc: ti: k3-socinfo: Fix typo in bitfield documentation soc: ti: knav_qmss_queue: Use device_get_match_data() firmware: ti_sci: Use device_get_match_data() firmware: qcom: qseecom: add missing include guards soc/pxa: ssp: Convert to platform remove callback returning void soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void soc/mediatek: mtk-devapc: Convert to platform remove callback returning void soc/loongson: loongson2_guts: Convert to platform remove callback returning void soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void ...
2023-10-19PM / devfreq: rockchip-dfi: add support for RK3588Sascha Hauer1-0/+18
Add support for the RK3588 to the driver. The RK3588 has four DDR channels with a register stride of 0x4000 between the channel registers, also it has a DDRMON_CTRL register per channel. Link: https://lore.kernel.org/all/20231018061714.3553817-20-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Add perf supportSascha Hauer2-0/+3
The DFI is a unit which is suitable for measuring DDR utilization, but so far it could only be used as an event driver for the DDR frequency scaling driver. This adds perf support to the DFI driver. Usage with the 'perf' tool can look like: perf stat -a -e rockchip_ddr/cycles/,\ rockchip_ddr/read-bytes/,\ rockchip_ddr/write-bytes/,\ rockchip_ddr/bytes/ sleep 1 Performance counter stats for 'system wide': 1582524826 rockchip_ddr/cycles/ 1802.25 MB rockchip_ddr/read-bytes/ 1793.72 MB rockchip_ddr/write-bytes/ 3595.90 MB rockchip_ddr/bytes/ 1.014369709 seconds time elapsed perf support has been tested on a RK3568 and a RK3399, the latter with dual channel DDR. Link: https://lore.kernel.org/all/20231019064819.3496740-1-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [cw00.choi: Fix typo from 'write_acccess' to 'write_access'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Handle LPDDR4XSascha Hauer1-0/+1
In the DFI driver LPDDR4X can be handled in the same way as LPDDR4. Add the missing case. Link: https://lore.kernel.org/all/20231018061714.3553817-13-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Add RK3568 supportSascha Hauer1-0/+12
This adds RK3568 support to the DFI driver. Only iniitialization differs from the currently supported RK3399. Link: https://lore.kernel.org/all/20231018061714.3553817-11-s.hauer@pengutronix.de/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE definesSascha Hauer2-6/+18
The DDRTYPE defines are named to be RK3399 specific, but they can be used for other Rockchip SoCs as well, so replace the RK3399_PMUGRF_ prefix with ROCKCHIP_. They are defined in a SoC specific header file, so when generalizing the prefix also move the new defines to a SoC agnostic header file. While at it use GENMASK to define the DDRTYPE bitfield and give it a name including the full register name. Link: https://lore.kernel.org/all/20231018061714.3553817-9-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-13firmware: tegra: Add suspend hook and reset BPMP IPC early on resumeSumit Gupta1-0/+6
Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp' to mark if BPMP is suspended. Also, add a 'flags' field in the 'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be set from the Tegra MC driver to signal that the reset of BPMP IPC channels is required before sending MRQ to the BPMP FW. Together both the fields allow us to handle any requests that might be sent too soon as they can cause hang during system resume. One case where we see BPMP requests being sent before the BPMP driver has resumed is the memory bandwidth requests which are triggered by onlining the CPUs during system resume. The CPUs are onlined before the BPMP has resumed and we need to reset the BPMP IPC channels to handle these requests. The additional check for 'flags' is done to avoid any un-intended BPMP IPC reset if the tegra_bpmp_transfer*() API gets called during suspend sequence after the BPMP driver is suspended. Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth") Co-developed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-11firmware: tegra: Fix a typoDeming Wang1-1/+1
successfully, not 'succesfully' Signed-off-by: Deming Wang <wangdeming@inspur.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10docs: move powerpc under archCosta Shulyupin1-1/+1
and fix all in-tree references. Architecture-specific documentation is being moved into Documentation/arch/ as a way of cleaning up the top-level documentation directory and making the docs hierarchy more closely match the source hierarchy. Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20230826165737.2101199-1-costa.shul@redhat.com
2023-09-25iommu/tegra-gart: Remove tegra-gartJason Gunthorpe1-26/+0
Thierry says this is not used anymore, and doesn't think it makes sense as an iommu driver. The HW it supports is about 10 years old now and newer HW uses different IOMMU drivers. As this is the only driver with a GART approach, and it doesn't really meet the driver expectations from the IOMMU core, let's just remove it so we don't have to think about how to make it fit in. It has a number of identified problems: - The assignment of iommu_groups doesn't match the HW behavior - It claims to have an UNMANAGED domain but it is really an IDENTITY domain with a translation aperture. This is inconsistent with the core expectation for security sensitive operations - It doesn't implement a SW page table under struct iommu_domain so * It can't accept a map until the domain is attached * It forgets about all maps after the domain is detached * It doesn't clear the HW of maps once the domain is detached (made worse by having the wrong groups) Cc: Thierry Reding <treding@nvidia.com> Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/6-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-09-01Merge tag 'iommu-updates-v6.6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core changes: - Consolidate probe_device path - Make the PCI-SAC IOVA allocation trick PCI-only AMD IOMMU: - Consolidate PPR log handling - Interrupt handling improvements - Refcount fixes for amd_iommu_v2 driver Intel VT-d driver: - Enable idxd device DMA with pasid through iommu dma ops - Lift RESV_DIRECT check from VT-d driver to core - Miscellaneous cleanups and fixes ARM-SMMU drivers: - Device-tree binding updates: - Add additional compatible strings for Qualcomm SoCs - Allow ASIDs to be configured in the DT to work around Qualcomm's broken hypervisor - Fix clocks for Qualcomm's MSM8998 SoC - SMMUv2: - Support for Qualcomm's legacy firmware implementation featured on at least MSM8956 and MSM8976 - Match compatible strings for Qualcomm SM6350 and SM6375 SoC variants - SMMUv3: - Use 'ida' instead of a bitmap for VMID allocation - Rockchip IOMMU: - Lift page-table allocation restrictions on newer hardware - Mediatek IOMMU: - Add MT8188 IOMMU Support - Renesas IOMMU: - Allow PCIe devices .. and the usual set of cleanups an smaller fixes" * tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (64 commits) iommu: Explicitly include correct DT includes iommu/amd: Remove unused declarations iommu/arm-smmu-qcom: Add SM6375 SMMUv2 iommu/arm-smmu-qcom: Add SM6350 DPU compatible iommu/arm-smmu-qcom: Add SM6375 DPU compatible iommu/arm-smmu-qcom: Sort the compatible list alphabetically dt-bindings: arm-smmu: Fix MSM8998 clocks description iommu/vt-d: Remove unused extern declaration dmar_parse_dev_scope() iommu/vt-d: Fix to convert mm pfn to dma pfn iommu/vt-d: Fix to flush cache of PASID directory table iommu/vt-d: Remove rmrr check in domain attaching device path iommu: Prevent RESV_DIRECT devices from blocking domains dmaengine/idxd: Re-enable kernel workqueue under DMA API iommu/vt-d: Add set_dev_pasid callback for dma domain iommu/vt-d: Prepare for set_dev_pasid callback iommu/vt-d: Make prq draining code generic iommu/vt-d: Remove pasid_mutex iommu/vt-d: Add domain_flush_pasid_iotlb() iommu: Move global PASID allocation from SVA to core iommu: Generalize PASID 0 for normal DMA w/o PASID ...
2023-08-30Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "This pull request is full of clk driver changes. In fact, there aren't any changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source ...
2023-08-30Merge tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-3/+0
Pull ARM SoC cleanups from Arnd Bergmann: "These are all minor cleanups for platform specific code in arch/arm/ and some of the associated drivers. The majority of these are work done by Rob Herring to improve the way devicetreee header files are handled" * tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits) ARM: davinci: Drop unused includes ARM: s5pv210: Explicitly include correct DT includes ARM: dove: Drop unused includes ARM: mvebu: Explicitly include correct DT includes Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung MAINTAINER: samsung: document dtbs_check requirement for Samsung Documentation/process: maintainer-soc: add clean platforms profile MAINTAINERS: soc: reference maintainer profile ARM: nspire: Remove unused header file mmio.h ARM: nspire: Use syscon-reboot to handle restart soc: fsl: Explicitly include correct DT includes soc: xilinx: Explicitly include correct DT includes soc: sunxi: Explicitly include correct DT includes soc: rockchip: Explicitly include correct DT includes soc: mediatek: Explicitly include correct DT includes soc: aspeed: Explicitly include correct DT includes firmware: Explicitly include correct DT includes bus: Explicitly include correct DT includes ARM: spear: Explicitly include correct DT includes ARM: mvebu: Explicitly include correct DT includes ...
2023-08-22net: mscc: ocelot: Remove unused declarationsYue Haibing1-1/+0
Commit 6c30384eb1de ("net: mscc: ocelot: register devlink ports") declared but never implemented ocelot_devlink_init() and ocelot_devlink_teardown(). Commit 2096805497e2 ("net: mscc: ocelot: automatically detect VCAP constants") declared but never implemented ocelot_detect_vcap_constants(). Commit 403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes") declared but never implemented ocelot_port_update_preemptible_tcs(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230821130218.19096-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-21Merge branches 'apple/dart', 'arm/mediatek', 'arm/renesas', 'arm/rockchip', ↵Joerg Roedel1-0/+1
'arm/smmu', 'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
2023-08-14clk: imx25: print silicon revision during initMartin Kaiser1-0/+1
Print the imx25 silicon revision when the clocks are initialised. Use the same mechanism as for imx27, i.e. call mx25_revision. This function is unused at the moment. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230802184046.153394-2-martin@kaiser.cx Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-12Merge tag 'at91-soc-6.6' of ↵Arnd Bergmann1-3/+0
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm AT91 SoC updates for 6.6: It contains: - explicitly include correct DT includes from Rob - one cleanup which removes unused extern declaration on atmel_tcb.h * tag 'at91-soc-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: Remove unused extern declarations ARM: at91: Explicitly include correct DT includes soc: microchip: Explicitly include correct DT includes Link: https://lore.kernel.org/r/20230804044118.231478-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-07iommu/mediatek: Add enable IOMMU SMC command for INFRA mastersChengci.Xu1-0/+1
Prepare for MT8188. In MT8188, the register which enables IOMMU for INFRA masters are in the secure world for security concerns, therefore we add a SMC command for INFRA masters to enable IOMMU in ATF. Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20230602090227.7264-5-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-07-29ARM: at91: Remove unused extern declarationsYueHaibing1-3/+0
commit 157576d55233 ("misc: remove atmel_tclib") left behind this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230725141105.26904-1-yuehaibing@huawei.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 23:19:34 +0000