summaryrefslogtreecommitdiff
path: root/include/soc
AgeCommit message (Collapse)AuthorFilesLines
2017-09-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
2017-08-22iommu/mediatek: Add mt2712 IOMMU supportYong Wu1-1/+1
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the ARM Short-descriptor like mt8173, and most of the HW registers are the same. The difference is that there are 2 M4U HWs in mt2712 while there's only one in mt8173. The purpose of 2 M4U HWs is for balance the bandwidth. Normally if there are 2 M4U HWs, there should be 2 iommu domains, each M4U has a iommu domain. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-17soc/tegra: Register SoC deviceThierry Reding1-0/+2
Move this code from arch/arm/mach-tegra and make it common among 32-bit and 64-bit Tegra SoCs. This is slightly complicated by the fact that on 32-bit Tegra, the SoC device is used as the parent for all devices that are instantiated from device tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+9
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
2017-06-13soc/tegra: bpmp: Implement generic PM domainsThierry Reding1-0/+12
The BPMP firmware, found on Tegra186 and later, provides an ABI that can be used to enable and disable power to several power partitions in Tegra SoCs. The ABI allows for enumeration of the available power partitions, so the driver can be reused on future generations, provided the BPMP ABI remains stable. Based on work by Stefan Kristiansson <stefank@nvidia.com> and Mikko Perttunen <mperttunen@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-06-13soc/tegra: bpmp: Update ABI headerThierry Reding1-10/+408
Update the BPMP ABI header to a more recent version. The new version adds support for a new powergating ABI as well as access to the ring buffer console, which allows debug messages to be output to the BPMP debug console. Some of the previously undocumented fields have been documented and missing bitmasks have been added. Furthermore the MRQ_RESET request now has a sub-command that allows to determine the maximum ID which in turn allows the resets to be enumerated, thereby allowing drivers to become agnostic of the Tegra generation. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-05-18net/wan/fsl_ucc_hdlc: add hdlc-bus supportHolger Brunck1-0/+5
This adds support for hdlc-bus mode to the fsl_ucc_hdlc driver. This can be enabled with the "fsl,hdlc-bus" property in the DTS node of the corresponding ucc. This aligns the configuration of the UPSMR and GUMR registers to what is done in our ucc_hdlc driver (that only support hdlc-bus mode) and with the QuickEngine's documentation for hdlc-bus mode. GUMR/SYNL is set to AUTO for the busmode as in this case the CD signal is ignored. The brkpt_support is enabled to set the HBM1 bit in the CMXUCR register to configure an open-drain connected HDLC bus. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18fsl/qe: add bit description for SYNL register for GUMRHolger Brunck1-0/+4
Add the bitmask for the two bit SYNL register according to the QUICK Engine Reference Manual. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-12Merge tag 'powerpc-4.12-2' of ↵Linus Torvalds2-19/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The change to the Linux page table geometry was delayed for more testing with 16G pages, and there's the new CPU features stuff which just needed one more polish before going in. Plus a few changes from Scott which came in a bit late. And then various fixes, mostly minor. Summary highlights: - rework the Linux page table geometry to lower memory usage on 64-bit Book3S (IBM chips) using the Hash MMU. - support for a new device tree binding for discovering CPU features on future firmwares. - Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements." Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp" * tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Support new device tree binding for discovering CPU features powerpc: Don't print cpu_spec->cpu_name if it's NULL of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle powerpc/64s: Fix unnecessary machine check handler relocation branch powerpc/mm/book3s/64: Rework page table geometry for lower memory usage powerpc: Fix distclean with Makefile.postlink powerpc/64e: Don't place the stack beyond TASK_SIZE powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery powerpc/8xx: Adding support of IRQ in MPC8xx GPIO soc/fsl/qbman: Disable IRQs for deferred QBMan work soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions soc/fsl/qe: only apply QE_General4 workaround on affected SoCs soc/fsl/qe: round brg_freq to 1kHz granularity soc/fsl/qe: get rid of immrbar_virt_to_phys() net: ethernet: ucc_geth: fix MEM_PART_MURAM mode powerpc/64e: Fix hang when debugging programs with relocated kernel
2017-05-09Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-8/+103
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs: Reset subsystem, merged through arm-soc by tradition: - Make bool drivers explicitly non-modular - New support for i.MX7 and Arria10 reset controllers PATA driver for Palmchip BK371 (acked by Tejun) Power domain drivers for i.MX (GPC, GPCv2) - Moved out of mach-imx for GPC - Bunch of tweaks, fixes, etc PMC support for Tegra186 SoC detection support for Renesas RZ/G1H and RZ/G1N Move Tegra flow controller driver from mach directory to drivers/soc - (Power management / CPU power driver) Misc smaller tweaks for other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) soc: pm-domain: Fix the mangled urls soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0 soc: renesas: rcar-sysc: Add support for fixing up power area tables soc: renesas: Register SoC device early soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible soc: imx: gpc: add defines for domain index soc: imx: Add GPCv2 power gating driver dt-bindings: Add GPCv2 power gating driver ARM/clk: move the ICST library to drivers/clk ARM: plat-versatile: remove stale clock header ARM: keystone: Drop PM domain support for k2g soc: ti: Add ti_sci_pm_domains driver dt-bindings: Add TI SCI PM Domains PM / Domains: Do not check if simple providers have phandle cells PM / Domains: Add generic data pointer to genpd data struct soc/tegra: Add initial flowctrl support for Tegra132/210 soc/tegra: flowctrl: Add basic platform driver soc/tegra: Move Tegra flowctrl driver ARM: tegra: Remove unnecessary inclusion of flowctrl header ...
2017-04-30soc/fsl/qe: get rid of immrbar_virt_to_phys()Christophe Leroy1-19/+0
immrbar_virt_to_phys() is not used anymore Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Li Yang <pku.leo@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30net: ethernet: ucc_geth: fix MEM_PART_MURAM modeChristophe Leroy1-0/+1
Since commit 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation"), muram area is not part of immrbar mapping anymore so immrbar_virt_to_phys() is not usable anymore. Fixes: 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Li Yang <pku.leo@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-04soc/tegra: Move Tegra flowctrl driverJon Hunter1-0/+82
The flowctrl driver is required for both ARM and ARM64 Tegra devices and in order to enable support for it for ARM64, move the Tegra flowctrl driver into drivers/soc/tegra. By moving the flowctrl driver, tegra_flowctrl_init() is now called by via an early initcall and to prevent this function from attempting to mapping IO space for a non-Tegra device, a test for 'soc_is_tegra()' is also added. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04soc/tegra: Fix link errors with PMC disabledArnd Bergmann1-8/+21
With the new Tegra186 PMC driver merged, anything that relies on the previous PMC driver fails to link when that is disabled: arch/arm/mach-tegra/pm.o: In function `tegra_pm_set': pm.c:(.text.tegra_pm_set+0x3c): undefined reference to `tegra_pmc_enter_suspend_mode' arch/arm/mach-tegra/pm.o: In function `tegra_suspend_enter': pm.c:(.text.tegra_suspend_enter+0x4): undefined reference to `tegra_pmc_get_suspend_mode' arch/arm/mach-tegra/pm.o: In function `tegra_init_suspend': pm.c:(.init.text+0x1c): undefined reference to `tegra_pmc_get_suspend_mode' pm.c:(.init.text+0x74): undefined reference to `tegra_pmc_set_suspend_mode' ERROR: tegra_powergate_sequence_power_up [drivers/ata/ahci_tegra.ko] undefined! ERROR: tegra_powergate_power_off [drivers/ata/ahci_tegra.ko] undefined! Making the definition depend on the presence of the driver makes it build again, though that might not be the correct fix. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 854014236290 ("soc/tegra: Implement Tegra186 PMC support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-03-24soc/qman: add macros needed by caam/qi driverHoria Geantă1-0/+2
A few other things need to be added in soc/qman, such that caam/qi won't open-code them. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: export non-programmable FQD fields queryHoria Geantă1-0/+68
Export qman_query_fq_np() function and related structures. This will be needed in the caam/qi driver, where "queue empty" condition will be decided based on the frm_cnt. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: add dedicated channel ID for CAAMHoria Geantă1-0/+3
Add and export the ID of the channel serviced by the CAAM (Cryptographic Acceleration and Assurance Module) DCP. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: export volatile dequeue related structsHoria Geantă1-0/+36
Since qman_volatile_dequeue() is already exported, move the related structures into the public header too. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-22Merge tag 'arc-4.11-rc1' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - Intc imporvements [Yuriy] - VDK platform updates [Alexey] * tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevant ARCv2: intc: Delete useless comments in Device Trees ARCv2: IDU-intc: Delete deprecated parameters in Device Trees ARCv2: IDU-intc: mask all common interrupts by default ARCv2: IDU-intc: Use build registers for getting numbers of interrupts ARCv2: intc: Set default priority for all core interrupts ARCv2: intc: Use runtime value of irq count for setting up intc ARCv2: intc: Rework the build time irq count information ARC: [intc-*]: confine NR_CPU_IRQS to intc code ARCv2: intc: Use ARC_REG_STATUS32 for addressing STATUS32 reg arc: vdk: Add support of UIO arc: vdk: Add support of MMC controller arc: vdk: Disable halt on reset
2017-02-20Merge tag 'for-v4.11' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "New drivers: - sbs-charger driver - max14656_charger_detector - axp20x_ac_power New chip/feature support" - axp20x_usb_power: add AXP223 support - tps65217: add usb charger support - qcom_smbb: support otg regulator - at91-reset: add samx7 support Dropped drivers: - intel_mid_battery (platform was dropped) Fixes: - at91-poweroff: avoid wearing off LPDDR memory - replace deprecated extcon API - lots of cleanup and style fixes - misc minor functionality fixes" * tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits) power: supply: add AC power supply driver for AXP20X and AXP22X PMICs dt-bindings: power: supply: add AXP20X/AXP22X AC power supply power: supply: axp20x_usb_power: use IIO channels when available power: supply: max14656: Export I2C and OF device ID as module aliases power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference power: supply: bq24190_charger: Adjust formatting power: supply: bq24190_charger: Handle fault before status on interrupt power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread() power: supply: bq24190_charger: Call power_supply_changed() for relevant component power: supply: bq24190_charger: Install irq_handler_thread() at end of probe() power: supply: bq24190_charger: Call set_mode_host() on pm_resume() power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING power: supply: qcom_smbb: add regulator dependency power: reset: at91-reset: remove leftover platform_device_id power: reset: at91-reset: add samx7 support power: supply: max14656: fix platform_no_drv_owner.cocci warnings power: supply: pcf50633-charger: Compress return logic into one line. power: supply: ab8500_btemp: Compress return logic into one line. power: reset: at91-poweroff: timely shutdown LPDDR memories ARM: at91: define LPDDR types ...
2017-02-06ARCv2: IDU-intc: Use build registers for getting numbers of interruptsYuriy Kolerov1-0/+17
This enhancement is needed to allow masking all available common interrupts in IDU interrupt controller in boot time since the kernel can discover a number of them from the build register. Also now there is no need to specify in device tree a list of used core interrupts by IDU. E.g. before: idu_intc: idu-interrupt-controller { compatible = "snps,archs-idu-intc"; interrupt-controller; interrupt-parent = <&core_intc>; #interrupt-cells = <2>; interrupts = <24 25 26 27 28 29 30 31>; }; and after: idu_intc: idu-interrupt-controller { compatible = "snps,archs-idu-intc"; interrupt-controller; interrupt-parent = <&core_intc>; #interrupt-cells = <2>; }; Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-24ARCv2: MCIP: update the BCR per current changesVineet Gupta1-8/+8
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-16ARM: at91: define LPDDR typesAlexandre Belloni1-0/+3
The Atmel MPDDR controller support LPDDR2 and LPDDR3 memories, add their types. Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-12-16Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds1-28/+34
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
2016-12-15Merge tag 'armsoc-drivers' of ↵Linus Torvalds5-31/+1965
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
2016-12-15Merge tag 'arc-4.10-rc1-part1' of ↵Linus Torvalds4-0/+263
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "These are mostly timer/clocksource driver updates which were Reviewed/Acked by Daniel but had to be merged via ARC tree due to dependencies. I will follow up with another pull request with actual ARC changes early next week ! Summary: - Moving ARC timer driver into drivers/clocksource - EZChip timer driver updates [Noam] - ARC AXS103 and HAPS platform updates [Alexey]" * tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: axs10x: really enable ARC PGU ARC: rename Zebu platform support to HAPS clocksource: nps: avoid maybe-uninitialized warning clocksource: Add clockevent support to NPS400 driver clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer soc: Support for NPS HW scheduling clocksource: import ARC timer driver ARC: breakout timer include code into separate header ... ARC: move mcip.h into include/soc and adjust the includes ARC: breakout aux handling into a separate header ARC: time: move time_init() out of the driver ARC: timer: gfrc, rtc: build under same option (64-bit timers) ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists ... ARC: timer: gfrc, rtc: deuglify big endian code
2016-11-30soc: Support for NPS HW schedulingNoam Camus1-0/+59
This new header file is for NPS400 SoC (part of ARC architecture). The header file includes macros for save/restore of HW scheduling. The control of HW scheduling is achieved by writing core registers. This code was moved from arc/plat-eznps so it can be used from drivers/clocksource/, available only for CONFIG_EZNPS_MTM_EXT. Signed-off-by: Noam Camus <noamca@mellanox.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-11-30ARC: breakout timer include code into separate header ...Vineet Gupta1-0/+38
... which allows for use in drivers/clocksource later Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30ARC: move mcip.h into include/soc and adjust the includesVineet Gupta1-0/+103
Also remove the dependency on ARCv2, to increase compile coverage for !ARCV2 builds Acked-by: Daniel Lezcano <daniel.lezcnao@linaro.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30ARC: breakout aux handling into a separate headerVineet Gupta1-0/+63
ARC timers use aux registers for programming and this paves way for moving ARC timer drivers into drivers/clocksource Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-23soc/qman: Handle endianness of h/w descriptorsClaudiu Manoil1-23/+25
The hardware descriptors have big endian (BE) format. Provide proper endianness handling for the remaining descriptor fields, to ensure they are correctly accessed by non-BE CPUs too. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Clean up CGR CSCN target update operationsClaudiu Manoil1-2/+2
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Change remaining contextB into context_bClaudiu Manoil1-6/+6
There are multiple occurences of both contextB and context_b in different h/w descriptors, referring to the same descriptor field known as "Context B". Stick with the "context_b" naming, for obvious reasons including consistency (see also context_a). Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Drop unused field from eqcr/dqrr descriptorsClaudiu Manoil1-2/+1
ORP ("Order Restoration Point") mechanism not supported. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Fix accesses to fqid, cleanupClaudiu Manoil1-0/+5
Preventively mask every access to the 'fqid' h/w field, since it is defined as a 24-bit field, for every h/w descriptor. Add generic accessors for this field to ensure correct access. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Fix struct qm_fqd set accessor for context_aClaudiu Manoil1-1/+1
context_a.hi is 32bit Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-18Merge tag 'tegra-for-4.10-soc' of ↵Olof Johansson1-31/+95
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers soc: tegra: Core SoC changes for v4.10-rc1 This contains mostly cleanup and new feature work on the power management controller as well as the addition of a Kconfig symbol for the new Tegra186 (Parker) SoC generation. * tag 'tegra-for-4.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Use consistent naming for PM domains soc/tegra: pmc: Remove genpd when adding provider fails soc/tegra: pmc: Check return code for pm_genpd_init() soc/tegra: pmc: Clean-up I/O rail error messages soc/tegra: pmc: Simplify IO rail bit handling soc/tegra: pmc: Guard against uninitialised PMC clock soc/tegra: pmc: Add I/O pad voltage support soc/tegra: pmc: Use consistent ordering of bit definitions soc/tegra: pmc: Correct type of variable for tegra_pmc_readl() soc/tegra: pmc: Use BIT macro for register field definition Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Merge tag 'tegra-for-4.10-firmware' of ↵Olof Johansson3-0/+1851
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers firmware: Add Tegra IVC and BPMP support IVC is an inter-processor communication protocol that uses shared memory to exchange data between processors. The BPMP driver makes use of this to communicate with the Boot and Power Management Processor (BPMP) and uses an additional hardware synchronization primitive from the HSP block to signal availability of new data (doorbell). Firmware running on the BPMP implements a number of services such as the control of clocks and resets within the system, or the ability to ungate or gate power partitions. * tag 'tegra-for-4.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18firmware: tegra: Add BPMP supportThierry Reding2-0/+1742
The Boot and Power Management Processor (BPMP) is a co-processor found on Tegra SoCs. It is designed to handle the early stages of the boot process and offload power management tasks (such as clocks, resets, powergates, ...) as well as system control services. Compared to the ARM SCPI, the services provided by BPMP are message- based rather than method-based. The BPMP firmware driver provides the services to transmit data to and receive data from the BPMP. Users can also register a Message ReQuest (MRQ), for which a service routine will be run when a corresponding event is received from the firmware. A set of messages, called the BPMP ABI, are specified for a number of different services provided by the BPMP (such as clocks or resets). Based on work by Sivaram Nair <sivaramn@nvidia.com> and Joseph Lo <josephl@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-18firmware: tegra: Add IVC libraryThierry Reding1-0/+109
The Inter-VM communication (IVC) is a communication protocol which is designed for interprocessor communication (IPC) or the communication between the hypervisor and the virtual machine with a guest OS. Message channels are used to communicate between processors. They are backed by DRAM or SRAM, so care must be taken to maintain coherence of data. The IVC library maintains memory-based descriptors for the transmission and reception channels as well as the data coherence of the counter and payload. Clients, such as the driver for the BPMP firmware, can use the library to exchange messages with remote processors. Based on work by Peter Newman <pnewman@nvidia.com> and Joseph Lo <josephl@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-15soc/tegra: pmc: Add I/O pad voltage supportLaxman Dewangan1-31/+95
I/O pins on Tegra SoCs are grouped into so-called I/O pads. Each such pad can be used to control the common voltage signal level and power state of the pins in the given pad. I/O pads can be powered down even if the system is active, which can save power from that I/O interface. For SoC generations prior to Tegra124 the I/O pad voltage is automatically detected and hence the system software doesn't need to configure it. However, starting with Tegra210 the detection logic has been removed, so explicit control of the I/O pad voltage by system software is required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-07ARM: at91: add secumod register definitionsAlexandre Belloni1-0/+19
Add registers and bits definitions for the security module found on sama5d2. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-16staging: vc04_services: fix up rpi firmware functionsGreg Kroah-Hartman1-0/+19
The raspberrypi-firmware.h file should provide empty functions if we aren't building in that option. This makes it easier to test-build code, and not have odd warnings about unused variables if you just try to #define away the functions. Cc: Daniel Stone <daniels@collabora.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Pranith Kumar <bobby.prani@gmail.com> Cc: popcornmix <popcornmix@gmail.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-16ARM: bcm2835: Add #define for VCHIQ property message.Eric Anholt1-0/+2
This comes from the downstream tree and is needed for the new VCHIQ driver in staging. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-14Merge tag 'powerpc-4.9-2' of ↵Linus Torvalds2-0/+1203
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Some more powerpc updates for 4.9: Freescale updates from Scott Wood: - qbman support (a prerequisite for datapath drivers such as ethernet) - a PCI DMA fix+improvement - reset handler changes - more 8xx optimizations - some cleanups and fixes.' Fixes: - selftests/powerpc: Add missing binaries to .gitignores (Michael Ellerman) - selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes (Michael Ellerman) - powerpc/pseries: Fix stack corruption in htpe code (Laurent Dufour) - powerpc/64s: Fix power4_fixup_nap placement (Nicholas Piggin) - powerpc/64: Fix incorrect return value from __copy_tofrom_user (Paul Mackerras) - powerpc/mm/hash64: Fix might_have_hea() check (Michael Ellerman) Other: - MAINTAINERS: Remove myself from PA Semi entries (Olof Johansson) - MAINTAINERS: Drop separate pseries entry (Michael Ellerman) - MAINTAINERS: Update powerpc website & add selftests (Michael Ellerman): * tag 'powerpc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (35 commits) powerpc/mm/hash64: Fix might_have_hea() check powerpc/64: Fix incorrect return value from __copy_tofrom_user powerpc/64s: Fix power4_fixup_nap placement powerpc/pseries: Fix stack corruption in htpe code selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes MAINTAINERS: Update powerpc website & add selftests MAINTAINERS: Drop separate pseries entry MAINTAINERS: Remove myself from PA Semi entries selftests/powerpc: Add missing binaries to .gitignores arch/powerpc: Add CONFIG_FSL_DPAA to corenetXX_smp_defconfig soc/qman: Add self-test for QMan driver soc/bman: Add self-test for BMan driver soc/fsl: Introduce DPAA 1.x QMan device driver soc/fsl: Introduce DPAA 1.x BMan device driver powerpc/8xx: make user addr DTLB miss the short path powerpc/8xx: Move additional DTLBMiss handlers out of exception area powerpc/8xx: use r3 to scratch CR in ITLBmiss soc/fsl/qe: fix gpio save_regs functions powerpc/8xx: add dedicated machine check handler powerpc/8xx: add system_reset_exception ...
2016-10-04Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+27
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk framework updates from Stephen Boyd: "The core clk framework changes are small again. They're mostly minor fixes that weren't causing enough problems (or any problems when we're just clarifying things) to warrant sending outside the merge window. The majority of changes are in drivers for various SoCs. Full details are in the logs, but here's the summary. Core: - Better support for DeviceTree overlays with the addition of the CLK_OF_DECLARE_DRIVER macro. Now we won't probe a clk driver for a device node that matched during of_clk_init(), unless the driver uses CLK_OF_DECLARE_DRIVER instead of CLK_OF_DECLARE. This allows overlays to work cleanly for drivers that must probe before the device model is ready, and also after it's ready when an overlay is loaded. - Clarification in the code around how clk_hw pointers are returned from of clk providers - Proper migration of prepare/enable counts to parents when the clk tree is constructed New Drivers: - Socionext's UniPhier SoCs - Loongson1C - ZTE ZX296718 - Qualcomm MDM9615 - Amlogic GXBB AO clocks and resets - Broadcom BCM53573 ILP - Maxim MAX77620 Updates: - Four Allwinner SoCs are migrated to the new style clk driver (A31, A31s, A23 and A33) - Exynos 5xxx audio and DRAM clks - Loongson1B AC97, DMA and NAND clks - Rockchip DDR clks and rk3399 driver tweaks - Renesas R-Car M3-W (r8a7796) SoC SDHI interface and Watchdog timer clks - Renasas R-Car H3 and M3-W CMT clks and RAVB+Thermal clks for M3-W - Amlogic GXBB MMC gate clks - at91 sama5d4 sckc - Removal of STiH415 and STiH416 clk support as the SoC is being removed - Rework of STiH4xx clk support for new style bindings - Continuation of driver migration to clk_hw based registration APIs - xgene PMD support - bcm2835 critical clk markings - ARM versatile ICST" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (199 commits) CLK: Add Loongson1C clock support clk: Loongson1: Make use of GENMASK clk: Loongson1: Update clocks of Loongson1B clk: Loongson1: Refactor Loongson1 clock clk: change the type of clk_hw_onecell_data.num to unsigned int clk: zx296718: register driver earlier with core_initcall clk: mvebu: dynamically allocate resources in Armada CP110 system controller clk: mvebu: fix setting unwanted flags in CP110 gate clock clk: nxp: clk-lpc32xx: Unmap region obtained by of_iomap clk: mediatek: clk-mt8173: Unmap region obtained by of_iomap clk: sunxi-ng: Fix reset offset for the A23 and A33 clk: at91: sckc: optimize boot time clk: at91: Add sama5d4 sckc support clk: at91: move slow clock controller clocks to sckc.c clk: imx6: initialize GPU clocks clk: imx6: fix i.MX6DL clock tree to reflect reality clk: imx53: Add clocks configuration clk: uniphier: add clock data for UniPhier SoCs clk: uniphier: add core support code for UniPhier clock driver clk: bcm: Add driver for BCM53573 ILP clock ...
2016-09-25soc/fsl: Introduce DPAA 1.x QMan device driverClaudiu Manoil1-0/+1074
This driver enables the Freescale DPAA 1.x Queue Manager block. QMan is a hardware accelerator that manages frame queues. It allows CPUs and other accelerators connected to the SoC datapath to enqueue and dequeue ethernet frames, thus providing the infrastructure for data exchange among CPUs and datapath accelerators. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-09-25soc/fsl: Introduce DPAA 1.x BMan device driverClaudiu Manoil1-0/+129
This driver enables the Freescale DPAA 1.x Buffer Manager block. BMan is a hardware accelerator that manages buffer pools. It allows CPUs and other accelerators connected to the SoC datapath to acquire and release buffers during data processing. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-08-31soc: rockchip: add header for ddr rate SIP interfaceLin Huang1-0/+27
Add a header for the SIP interface defined to access the dcf controller handling ddr rate changes on rk3399 (and most likely later socs). This interface is shared between the clock driver as well as the devfreq driver. The SIP interface counterpart was merged from pull-request #684 [0] into the upstream arm-trusted-firmware codebase. [0] https://github.com/ARM-software/arm-trusted-firmware/pull/684 Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-30usb: ohci-at91: Forcibly suspend ports while USB suspendWenyou Yang1-0/+14
The usb controller does not manage correctly the suspend mode for the ehci. In echi mode, there is no way to suspend without any device connected to it. This is why this specific control is added to fix this issue. Since the suspend mode works in ohci mode, this specific control works by suspend the usb controller in ohci mode. This specific control is by setting the SUSPEND_A/B/C fields of SFR_OHCIICR(OHCI Interrupt Configuration Register) in the SFR while the OHCI USB suspend. This set operation must be done before the USB clock disabled, clear operation after the USB clock enabled. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 06:47:17 +0000