summaryrefslogtreecommitdiff
path: root/include/linux/mmc
AgeCommit message (Collapse)AuthorFilesLines
2015-01-12mmc: sdhci: Disable re-tuning for HS400Adrian Hunter1-0/+1
Re-tuning for HS400 mode must be done in HS200 mode. Currently there is no support for that. That needs to be reflected in the code. Specifically, if tuning is executed in HS400 mode then return an error, and do not start the tuning timer if HS200 tuning is being done prior to switching to HS400. Note that periodic re-tuning is not expected to be needed for HS400 but re-tuning is still needed after the host controller has lost power. In the case of suspend/resume that is not necessary because the card is fully re-initialised. That just leaves runtime suspend/resume with no support for HS400 re-tuning. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-08mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameterUlf Hansson1-1/+1
To be able to use mmc_send_tuning() prior the struct mmc_card has been allocated, let's convert it to take the struct mmc_host* as parameter instead. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Dong Aisheng <b29396@freescale.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2014-11-26mmc: core: add core-level function for sending tuning commandsMinda Chen1-0/+1
According to the SD card spec, Add a manual tuning command function for SDR104/HS200. Sending command 19 or command 21 to read data and compare with the tunning block pattern. This patch will help to decrease some platform private codes in SDHCI platform_execute_tuning() callbacks. Signed-off-by: Minda Chen <Minda.Chen@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: dw_mmc: add support for the other bit of sdio interruptAddy Ke1-0/+3
The bit of sdio interrupt is 16 in designware implementation, but it is 24 on Rockchip SoCs.This patch add sdio_id0 for the number of slot0 in the SDIO interrupt registers. Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci: Add HS400 support to SDHCI driverAdrian Hunter1-0/+2
MMC core already has support for HS400. Add HS400 support to SDHCI driver. The SDHC Standard specification does not define HS400 so consequently HS400 support is non-standard. However HS400 is not selected without the host controller setting the corresponding capability flags so host controllers not yet supporting HS400 will not be affected. To support that, a quirk SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 is introduced to enable the use of capabilities register reserved bit-63 to indicate HS400 support. Because HS400 is non-standard for SDHCI, it is possible that different vendors will do things in different ways. However HS200 support faced the same issue but currently there is only one solution. As such, no attempt has been made to provide for alternate HS400 solutions except for SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci: Clear also HS400 1.2V capability if 1.2V is not supportedAdrian Hunter1-0/+1
1.2V HS200 mode capability is cleared if there is not a voltage regulator that supports 1.2V. Do the same for 1.2V HS400 mode. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: dw_mmc: Add IDMAC 64-bit address mode supportPrabu Thangamuthu1-0/+2
Synopsys DW_MMC IP core supports Internal DMA Controller with 64-bit address mode from IP version 2.70a onwards. Updated the driver to support IDMAC 64-bit addressing mode. Signed-off-by: Prabu Thangamuthu <prabu.t@synopsys.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci: Add a quirk for AMD SDHC transfer mode register need to be ↵Vincent Wan1-0/+2
cleared for cmd without data SDHC controller in AMD chipsets require SDHC transfer mode register to be cleared for commands without data. The issue was uncovered during testing eMMC cards on KB/ML based platforms Signed-off-by: Vincent Wan <vincent.wan@amd.com> Signed-off-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Tested-by: Vikram B <vikram.b@amd.com> Tested-by: Raghavendra Swamy <raghavendra.swamy@amd.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: sdhci: Add 64-bit ADMA supportAdrian Hunter1-0/+3
Add 64-bit ADMA support including: - add 64-bit ADMA descriptor - add SDHCI_USE_64_BIT_DMA flag - set upper 32-bits of DMA addresses - ability to select 64-bit ADMA - ability to use 64-bit ADMA sizes and alignment - display "ADMA 64-bit" when host is added It is assumed that a 64-bit capable device has set a 64-bit DMA mask and *must* do 64-bit DMA. A driver has the opportunity to change that during the first call to ->enable_dma(). Similarly SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to implement. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: sdhci: Parameterize ADMA sizes and alignmentAdrian Hunter1-0/+7
In preparation for 64-bit ADMA, parameterize ADMA sizes and alignment. 64-bit ADMA has a larger descriptor because it contains a 64-bit address instead of a 32-bit address. Also data must be 8-byte aligned instead of 4-byte aligned. Consequently, sdhci_host members are added for descriptor, table, and buffer sizes and alignment. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: sdhci: Use 'void *' for not 'u8 *' for ADMA dataAdrian Hunter1-2/+2
It is kernel-style to use 'void *' for anonymous data. This is being applied to the ADMA bounce buffer which contains unaligned bytes, and to the ADMA descriptor table which will contain 32-bit ADMA descriptors or 64-bit ADMA descriptors when support is added. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: sdhci: Rename adma_desc to adma_tableAdrian Hunter1-1/+1
In preparation for 64-bit ADMA, rename adma_desc to adma_table. That is because members will be added for descriptor size and table size, so using adma_desc (which is the table) is confusing. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: core: Remove the redundant mmc_send_ext_csd() APIUlf Hansson1-1/+0
Previous patches has replaced the calls to mmc_send_ext_csd() into mmc_get_ext_csd(), thus mmc_send_ext_csd() has become redundant. Let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: core: Export mmc_get_ext_csd()Ulf Hansson1-0/+1
Callers of mmc_send_ext_csd() will be able to decrease code duplication by using mmc_get_ext_csd() instead. Let's make it available. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: dw_mmc: Remove old card detect infrastructureDoug Anderson1-2/+0
The dw_mmc driver had a bunch of code that ran whenever a card was ejected and inserted. However, this code was old and crufty and should be removed. Some evidence that it's really not needed: 1. Is is supposed to be legal to use 'cd-gpio' on dw_mmc instead of using the built-in card detect mechanism. The 'cd-gpio' code doesn't run any of the crufty old code but yet still works. 2. While looking at this, I realized that my old change (369ac86 mmc: dw_mmc: don't queue up a card detect at slot startup) actually castrated the old code a little bit already and nobody noticed. Specifically "last_detect_state" was left as 0 at bootup. That means that on the first card removal none of the crufty code ran. 3. I can run "while true; do dd if=/dev/mmcblk1 of=/dev/null; done" while ejecting and inserting an SD Card and the world doesn't explode. If some of the crufty old code is actually needed, we should justify it and also put it in some place where it will be run even with "cd-gpio". Note that in my case I'm using the "cd-gpio" mechanism but for various reasons the hardware triggers a dw_mmc "card detect" at bootup. That was actually causing a real bug. The card detect workqueue was running while the system was trying to enumerate the card. The "present != slot->last_detect_state" triggered and we were doing all kinds of crazy stuff and messing up enumeration. The new mechanism of just asking the core to check the card is much safer and then the bogus interrupt doesn't hurt. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: alim.akhtar <alim.akhtar@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: core: Report firmware version for eMMC 5.0 devices.Gwendal Grignou2-0/+6
For eMMC 5.0 compliant device, firmware version is stored in ext_csd. Report firmware as a 64bit hexa decimal. Vendor can use hexa or ascii string to report firmware version. Also add FFU related EXT_CSD register and note if the device is FFU capable. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: core: Remove unused mmc_list_to_card() macroUlf Hansson1-2/+0
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: block: Use dev_set|get_drvdata()Ulf Hansson1-2/+0
In most of the cases mmc_get|set_drvdata() didn't simplify code, which should be the primary reason for such macros. Let's remove them and convert to the common device_driver macros, dev_set|get_drvdata() instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: core: Convert mmc_driver to device_driverUlf Hansson1-14/+2
The struct mmc_driver adds an extra layer on top of the struct device_driver. That would be fine, if there were a good reason, but that's not the case. Let's simplify code by converting to the common struct device_driver instead and thus also removing superfluous overhead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: core: Don't export the to_sdio_driver macroUlf Hansson1-2/+0
The macro is only used by the mmc core, so let's move it in there. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-03mmc: sdhci: Add quirk for always getting TC with stop cmdAdrian Hunter1-0/+2
Add a quirk for a host controller that always sets a Transfer Complete interrupt status for the stop command even when a busy response is not indicated. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-02mmc: core: restore detect line inversion semanticsLinus Walleij1-2/+2
commit 98e90de99a0c43bd434da814c882c4332441871e "mmc: host: switch OF parser to use gpio descriptors" switched the semantic behaviour of card detect and read only flags such that the inversion capability flag would only be set if inversion was explicitly specified in the device tree, in the hopes that no-one was using double inversion. It turns out that the XOR:ing between the explicit inversion was indeed in use, so we need to restore the old semantics where both ways of inversion are checked and the end result XOR:ed. Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: core: Add new power_mode MMC_POWER_UNDEFINEDRoger Tseng1-0/+1
Add MMC_POWER_UNDEFINED for power_mode in struct mmc_ios and use it as the initial value of host->ios.power_mode. For hosts with MMC_CAP2_NO_PRESCAN_POWERUP, this makes the later mmc_power_off() do real power-off things instead of NOP, and further prevents state messed up in cards that was already initialized (eg. by BIOS of UEFI driver). Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-23mmc: Consolidate emmc tuning blocksStephen Boyd1-0/+5
The same tuning block exists in the dw_mmc h.c and sdhci-msm.c files. Move these into mmc.c so that they can be shared across drivers. Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-19mmc: Replace "enhanced_area_en" attribute by "partition_setting_completed"Grégory Soutadé2-1/+3
Replace ext_csd "enhanced_area_en" attribute by "partition_setting_completed". It was used whether or not enhanced user area is defined and without checks of EXT_CSD_PARTITION_SETTING_COMPLETED bit. Signed-off-by: Grégory Soutadé <gsoutade@neotion.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: slot-gpio: add gpiod variant to get wp GPIOLinus Walleij1-0/+3
This makes it possible to get the write protect (read only) GPIO line from a GPIO descriptor. Written to exactly mirror the card detect function. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: remove MMC_CAP2_NO_MULTI_READ flagsKuninori Morimoto1-1/+0
Now, mmc framework uses multi_io_quirk for I/O HW bug workaround. MMC_CAP2_NO_MULTI_READ flag is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: Add .multi_io_quirk callback for multi I/O HW bugKuninori Morimoto1-0/+7
Historically, we have been using MMC_CAP* to handle host HW issues and currently the block layer uses MMC_CAP2_NO_MULTI_READ flag for a multi I/O HW bug workaround. There are a few tweaks needed to make MMC_CAP2_NO_MULTI_READ suite all situations. Therefore let's add an optional host ops callback to enable host drivers to return the number of blocks it allows per request. In a future patch and when host drivers have converted to the new callback, MMC_CAP2_NO_MULTI_READ shall be removed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: sdhci: handle busy-end interrupt during commandChanho Min1-0/+1
It is fully legal for a controller to start handling busy-end interrupt before it has signaled that the command has completed. So make sure we do things in the proper order, Or it results that command interrupt is ignored so it can cause unexpected operations. This is founded at some toshiba emmc with the bellow warning. "mmc0: Got command interrupt 0x00000001 even though no command operation was in progress." This issue has been also reported by Youssef TRIKI: It is not specific to Toshiba devices, and happens with eMMC devices as well as SD card which support Auto-CMD12 rather than CMD23. Also, similar patch is submitted by: Gwendal Grignou <gwendal@chromium.org> Changes since v1: Fixed conflict with the next of git.linaro.org/people/ulf.hansson/mmc.git and Tested if issue is fixed again. Signed-off-by: Hankyung Yu <hankyung.yu@lge.com> Signed-off-by: Chanho Min <chanho.min@lge.com> Tested-by: Youssef TRIKI <youssef.triki@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: dw_mmc: Support voltage changesDoug Anderson1-0/+2
For UHS cards we need the ability to switch voltages from 3.3V to 1.8V. Add support to the dw_mmc driver to handle this. Note that dw_mmc needs a little bit of extra code since the interface needs a special bit programmed to the CMD register while CMD11 is progressing. This means adding a few extra states to the state machine to track. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: dw_mmc: use mmc_regulator_get_supply to handle regulatorsYuvaraj CD1-1/+1
This patch makes use of mmc_regulator_get_supply() to handle the vmmc and vqmmc regulators.Also it moves the code handling the these regulators to dw_mci_set_ios().It turned on the vmmc and vqmmc during MMC_POWER_UP and MMC_POWER_ON,and turned off during MMC_POWER_OFF. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: implement Driver Stage Register handlingSascha Hauer2-1/+5
Some eMMC and SD cards implement a DSR register that allows to tune raise/fall times and drive strength of the CMD and DATA outputs. The values to use depend on the card in use and the host. It might be needed to reduce the drive strength to prevent voltage peaks above the host's specification. Implement a 'dsr' devicetree property that allows to specify the value to set the DSR to. For non-dt setups the new members of mmc_host can be set by board code. This patch was initially authored by Sascha Hauer. It contains improvements authored by Markus Niebel and Uwe Kleine-König. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: Correct the value of MMC_NUM_PHY_PARTITIONYi Sun1-2/+3
eMMC card can support up to 7 physical partitions, including 2 boot, 1 RPMB and 4 GPs. Change MMC_NUM_PHY_PARTITION from 6 to 7, which is the correct value. Signed-off-by: Yi Sun <yi.y.sun@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-11mmc: dw_mmc: Slot quirk "disable-wp" is deprecated.Jaehoon Chung1-0/+2
Slot quirks "disable-wp" is deprecated. Instead, use the host quirk "disable-wp". (Because the slot-node is removed in dt-file.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sdhci: Use mmc core regulator infrastuctureTim Kryger1-3/+0
Switch the common SDHCI code over to use mmc_host's regulator pointers and remove the ones in the sdhci_host structure. Additionally, use the common mmc_regulator_get_supply function to get the regulators and set the ocr_avail mask. This change sets the ocr_avail directly based upon the voltage ranges supported which ensures ocr_avail is set correctly while allowing the use of regulators that can't provide exactly 1.8v, 3.0v, or 3.3v. Signed-off-by: Tim Kryger <tim.kryger@gmail.com> Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-22mmc: sdhci: track whether preset mode is currently enabled in hardwareRussell King1-0/+1
Track whether preset mode is currently enabled in hardware, and use that when making decisions elsewhere in the code rather than reading the register and checking the bit. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: cache timing information locallyRussell King1-0/+2
Rather than reading back the timing information from the registers, cache it locally. This allows implementations to translate the UHS timing by overriding the set_uhs_signaling() method as required without also having to emulate the SDHCI_HOST_CONTROL2 register. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert sdhci_set_clock() into a library functionRussell King1-2/+0
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: move FSL ESDHC reset handling quirk into esdhc codeRussell King1-2/+0
The Freescale esdhc driver is the only driver which needs the interrupt registers restored after a reset. Move this quirk to be part of the ESDHC driver implementation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: more efficient interrupt enable register handlingRussell King1-0/+3
Rather than wasting cycles read-modify-writing the interrupt enable registers, cache the value locally instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: push card_tasklet into threaded irq handlerRussell King1-2/+1
There's no requirement to have the card tasklet separate now that we have a threaded interrupt handler, so kill this and move the called code into the threaded part of the handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert to new SDIO IRQ handlingRussell King1-0/+2
Use a generic threaded interrupt handler for SDIO interrupt handling, rather than allowing the SDIO core code to buggily spawn its own thread. This results in host drivers to be more in control of how SDIO interrupts are acknowledged in the hardware, rather than having the internals of the SDIO core placed upon them, possibly resulting in sub-standard handling. At least one SDHCI implementation specifies a very specific sequence to deal with a card interrupt. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdio_irq: rework sdio irq handlingRussell King1-0/+3
Rather than the SDIO support spawning it's own thread for handling card interrupts, use the generic IRQ infrastructure for this, triggering it from the host interface's interrupt handling directly. This avoids a race between the parent thread waiting to receive an interrupt response from the card, and the slow startup from the sdio irq thread, which can occur as a result of high system load (eg, while udev is running.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: core: Improve support for deferred regulatorsTim Kryger1-6/+2
Callers of mmc_regulator_get_supply could benefit from knowing if either of the regulators are present but not yet available. Since callers do not currently examine the return value, modify this function to return zero or -EPROBE_DEFER if either regulator get returns the same. Furthermore, since callers check vmmc/vqmmc using IS_ERR and can deal with absent regulators, switch to devm_regulator_get_optional. This has the added benefit of allowing this function to behave correctly even in the !CONFIG_REGULATOR case such that the stub can be removed. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: add support for HS400 mode of eMMC5.0Seungwon Jeon3-1/+21
This patch adds HS400 mode support for eMMC5.0 device. HS400 mode is high speed DDR interface timing from HS200. Clock frequency is up to 200MHz and only 8-bit bus width is supported. In addition, tuning process of HS200 is required to synchronize the command response on the CMD line because CMD input timing for HS400 mode is the same as HS200 mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Jackey Shen <jackey.shen@amd.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: rework selection of bus speed modeSeungwon Jeon2-0/+5
Current implementation for bus speed mode selection is too complicated. This patch is to simplify the codes and remove some duplicate parts. The following changes are including: * Adds functions for each mode selection(HS, HS-DDR, HS200 and etc) * Rearranged the mode selection sequence with supported device type * Adds maximum speed for HS200 mode(hs200_max_dtr) * Adds field definition for HS_TIMING of EXT_CSD Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: identify available device type to selectSeungwon Jeon3-11/+9
Device types which are supported by both host and device can be identified when EXT_CSD is read. There is no need to check host's capability anymore. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: drop the speed mode of card's stateSeungwon Jeon2-17/+29
Timing mode identifier has same role and can take the place of speed mode. This change removes all related speed mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: remove unused member variable.Jaehoon Chung1-14/+0
Since using the device-tree, didn't use the callback pointer. So removed the unused callback pointer. When the set_power callback is used, it should be added in future. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-22mmc: card.h: Use NULL instead of 0 for END_FIXUPFabio Estevam1-1/+1
Fix the following sparse warnings: drivers/mmc/card/block.c:2421:9: warning: Using plain integer as NULL pointer drivers/mmc/core/quirks.c:69:9: warning: Using plain integer as NULL pointer Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 06:45:40 +0000