summaryrefslogtreecommitdiff
path: root/fs/ubifs
AgeCommit message (Collapse)AuthorFilesLines
2021-06-22ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inodeZhihao Cheng1-0/+7
xfstests-generic/476 reports a warning message as below: WARNING: CPU: 2 PID: 30347 at fs/inode.c:361 inc_nlink+0x52/0x70 Call Trace: do_rename+0x502/0xd40 [ubifs] ubifs_rename+0x8b/0x180 [ubifs] vfs_rename+0x476/0x1080 do_renameat2+0x67c/0x7b0 __x64_sys_renameat2+0x6e/0x90 do_syscall_64+0x66/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xae Following race case can cause this: rename_whiteout(Thread 1) wb_workfn(Thread 2) ubifs_rename do_rename __writeback_single_inode spin_lock(&inode->i_lock) whiteout->i_state |= I_LINKABLE inode->i_state &= ~dirty; ---- How race happens on i_state: (tmp = whiteout->i_state | I_LINKABLE) (tmp = inode->i_state & ~dirty) (whiteout->i_state = tmp) (inode->i_state = tmp) ---- spin_unlock(&inode->i_lock) inc_nlink(whiteout) WARN_ON(!(inode->i_state & I_LINKABLE)) !!! Fix to add i_lock to avoid i_state update race condition. Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-06-22ubifs: Fix spelling mistakesZheng Yongjun6-6/+6
Fix some spelling mistakes in comments: withoug ==> without numer ==> number aswell ==> as well referes ==> refers childs ==> children unnecesarry ==> unnecessary Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-06-18ubifs: Remove ui_mutex in ubifs_xattr_get and change_xattrZhihao Cheng1-4/+0
Since ubifs_xattr_get and ubifs_xattr_set cannot being executed parallelly after importing @host_ui->xattr_sem, now we can remove ui_mutex imported by commit ab92a20bce3b4c2 ("ubifs: make ubifs_[get|set]xattr atomic"). @xattr_size, @xattr_names and @xattr_cnt can't be out of protection by @host_ui->mutex yet, they are sill accesed in other places, such as pack_inode() called by ubifs_write_inode() triggered by page-writeback. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-06-18ubifs: Fix races between xattr_{set|get} and listxattr operationsZhihao Cheng3-11/+36
UBIFS may occur some problems with concurrent xattr_{set|get} and listxattr operations, such as assertion failure, memory corruption, stale xattr value[1]. Fix it by importing a new rw-lock in @ubifs_inode to serilize write operations on xattr, concurrent read operations are still effective, just like ext4. [1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com Fixes: 1e51764a3c2ac05a23 ("UBIFS: add new flash file system") Cc: stable@vger.kernel.org # v2.6+ Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-06-18ubifs: fix snprintf() checkingDan Carpenter1-1/+1
The snprintf() function returns the number of characters (not counting the NUL terminator) that it would have printed if we had space. This buffer has UBIFS_DFS_DIR_LEN characters plus one extra for the terminator. Printing UBIFS_DFS_DIR_LEN is okay but anything higher will result in truncation. Thus the comparison needs to be change from == to >. These strings are compile time constants so this patch doesn't affect runtime. Fixes: ae380ce04731 ("UBIFS: lessen the size of debugging info data structure") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-06-18ubifs: journal: Fix error return code in ubifs_jnl_write_inode()Zhen Lei1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 9ca2d7326444 ("ubifs: Limit number of xattrs per inode") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-05-04Merge tag 'for-linus-5.13-rc1' of ↵Linus Torvalds3-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull JFFS2, UBI and UBIFS updates from Richard Weinberger: "JFFS2: - Use splice_write() - Fix for a slab-out-of-bounds bug UBI: - Fix for clang related warnings - Code cleanup UBIFS: - Fix for inode rebirth at replay - Set s_uuid - Use zstd for default filesystem" * tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Remove unnecessary struct declaration jffs2: Hook up splice_write callback jffs2: avoid Wempty-body warnings jffs2: Fix kasan slab-out-of-bounds problem ubi: Fix fall-through warnings for Clang ubifs: Report max LEB count at mount time ubifs: Set s_uuid in super block to support ima/evm uuid options ubifs: Default to zstd compression ubifs: Only check replay with inode type to judge if inode linked
2021-04-27Merge branch 'miklos.fileattr' of ↵Linus Torvalds4-42/+43
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fileattr conversion updates from Miklos Szeredi via Al Viro: "This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a separate method. The interface is reasonably uniform across the filesystems that support it and gives nice boilerplate removal" * 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits) ovl: remove unneeded ioctls fuse: convert to fileattr fuse: add internal open/release helpers fuse: unsigned open flags fuse: move ioctl to separate source file vfs: remove unused ioctl helpers ubifs: convert to fileattr reiserfs: convert to fileattr ocfs2: convert to fileattr nilfs2: convert to fileattr jfs: convert to fileattr hfsplus: convert to fileattr efivars: convert to fileattr xfs: convert to fileattr orangefs: convert to fileattr gfs2: convert to fileattr f2fs: convert to fileattr ext4: convert to fileattr ext2: convert to fileattr btrfs: convert to fileattr ...
2021-04-15ubifs: Report max LEB count at mount timeMartin Devera1-2/+2
There is no other way to directly report/query this quantity. It is useful when planing how given filesystem can be resized. Signed-off-by: Martin Devera <devik@eaxlabs.cz> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-15ubifs: Set s_uuid in super block to support ima/evm uuid optionsSteffen Trumtrar1-0/+2
This is required to provide uuid based integrity functionality for: ima_policy (fsuuid option) and the 'evmctl' command ('--uuid' option). Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de> Co-developed-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-15ubifs: Default to zstd compressionRui Salvaterra1-0/+3
Compared to lzo and zlib, zstd is the best all-around performer, both in terms of speed and compression ratio. Set it as the default, if available. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-15ubifs: Only check replay with inode type to judge if inode linkedGuochun Mao1-1/+2
Conside the following case, it just write a big file into flash, when complete writing, delete the file, and then power off promptly. Next time power on, we'll get a replay list like: ... LEB 1105:211344 len 4144 deletion 0 sqnum 428783 key type 1 inode 80 LEB 15:233544 len 160 deletion 1 sqnum 428785 key type 0 inode 80 LEB 1105:215488 len 4144 deletion 0 sqnum 428787 key type 1 inode 80 ... In the replay list, data nodes' deletion are 0, and the inode node's deletion is 1. In current logic, the file's dentry will be removed, but inode and the flash space it occupied will be reserved. User will see that much free space been disappeared. We only need to check the deletion value of the following inode type node of the replay entry. Fixes: e58725d51fa8 ("ubifs: Handle re-linking of inodes correctly while recovery") Cc: stable@vger.kernel.org Signed-off-by: Guochun Mao <guochun.mao@mediatek.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-12ubifs: convert to fileattrMiklos Szeredi4-42/+43
Use the fileattr API to let the VFS handle locking, permission checking and conversion. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: Richard Weinberger <richard@nod.at>
2021-04-08treewide: Change list_sort to use const pointersSami Tolvanen2-5/+6
list_sort() internally casts the comparison function passed to it to a different type with constant struct list_head pointers, and uses this pointer to call the functions, which trips indirect call Control-Flow Integrity (CFI) checking. Instead of removing the consts, this change defines the list_cmp_func_t type and changes the comparison function types of all list_sort() callers to use const pointers, thus avoiding type mismatches. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
2021-02-23Merge tag 'idmapped-mounts-v5.12' of ↵Linus Torvalds5-19/+24
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull idmapped mounts from Christian Brauner: "This introduces idmapped mounts which has been in the making for some time. Simply put, different mounts can expose the same file or directory with different ownership. This initial implementation comes with ports for fat, ext4 and with Christoph's port for xfs with more filesystems being actively worked on by independent people and maintainers. Idmapping mounts handle a wide range of long standing use-cases. Here are just a few: - Idmapped mounts make it possible to easily share files between multiple users or multiple machines especially in complex scenarios. For example, idmapped mounts will be used in the implementation of portable home directories in systemd-homed.service(8) where they allow users to move their home directory to an external storage device and use it on multiple computers where they are assigned different uids and gids. This effectively makes it possible to assign random uids and gids at login time. - It is possible to share files from the host with unprivileged containers without having to change ownership permanently through chown(2). - It is possible to idmap a container's rootfs and without having to mangle every file. For example, Chromebooks use it to share the user's Download folder with their unprivileged containers in their Linux subsystem. - It is possible to share files between containers with non-overlapping idmappings. - Filesystem that lack a proper concept of ownership such as fat can use idmapped mounts to implement discretionary access (DAC) permission checking. - They allow users to efficiently changing ownership on a per-mount basis without having to (recursively) chown(2) all files. In contrast to chown (2) changing ownership of large sets of files is instantenous with idmapped mounts. This is especially useful when ownership of a whole root filesystem of a virtual machine or container is changed. With idmapped mounts a single syscall mount_setattr syscall will be sufficient to change the ownership of all files. - Idmapped mounts always take the current ownership into account as idmappings specify what a given uid or gid is supposed to be mapped to. This contrasts with the chown(2) syscall which cannot by itself take the current ownership of the files it changes into account. It simply changes the ownership to the specified uid and gid. This is especially problematic when recursively chown(2)ing a large set of files which is commong with the aforementioned portable home directory and container and vm scenario. - Idmapped mounts allow to change ownership locally, restricting it to specific mounts, and temporarily as the ownership changes only apply as long as the mount exists. Several userspace projects have either already put up patches and pull-requests for this feature or will do so should you decide to pull this: - systemd: In a wide variety of scenarios but especially right away in their implementation of portable home directories. https://systemd.io/HOME_DIRECTORY/ - container runtimes: containerd, runC, LXD:To share data between host and unprivileged containers, unprivileged and privileged containers, etc. The pull request for idmapped mounts support in containerd, the default Kubernetes runtime is already up for quite a while now: https://github.com/containerd/containerd/pull/4734 - The virtio-fs developers and several users have expressed interest in using this feature with virtual machines once virtio-fs is ported. - ChromeOS: Sharing host-directories with unprivileged containers. I've tightly synced with all those projects and all of those listed here have also expressed their need/desire for this feature on the mailing list. For more info on how people use this there's a bunch of talks about this too. Here's just two recent ones: https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf https://fosdem.org/2021/schedule/event/containers_idmap/ This comes with an extensive xfstests suite covering both ext4 and xfs: https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts It covers truncation, creation, opening, xattrs, vfscaps, setid execution, setgid inheritance and more both with idmapped and non-idmapped mounts. It already helped to discover an unrelated xfs setgid inheritance bug which has since been fixed in mainline. It will be sent for inclusion with the xfstests project should you decide to merge this. In order to support per-mount idmappings vfsmounts are marked with user namespaces. The idmapping of the user namespace will be used to map the ids of vfs objects when they are accessed through that mount. By default all vfsmounts are marked with the initial user namespace. The initial user namespace is used to indicate that a mount is not idmapped. All operations behave as before and this is verified in the testsuite. Based on prior discussions we want to attach the whole user namespace and not just a dedicated idmapping struct. This allows us to reuse all the helpers that already exist for dealing with idmappings instead of introducing a whole new range of helpers. In addition, if we decide in the future that we are confident enough to enable unprivileged users to setup idmapped mounts the permission checking can take into account whether the caller is privileged in the user namespace the mount is currently marked with. The user namespace the mount will be marked with can be specified by passing a file descriptor refering to the user namespace as an argument to the new mount_setattr() syscall together with the new MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern of extensibility. The following conditions must be met in order to create an idmapped mount: - The caller must currently have the CAP_SYS_ADMIN capability in the user namespace the underlying filesystem has been mounted in. - The underlying filesystem must support idmapped mounts. - The mount must not already be idmapped. This also implies that the idmapping of a mount cannot be altered once it has been idmapped. - The mount must be a detached/anonymous mount, i.e. it must have been created by calling open_tree() with the OPEN_TREE_CLONE flag and it must not already have been visible in the filesystem. The last two points guarantee easier semantics for userspace and the kernel and make the implementation significantly simpler. By default vfsmounts are marked with the initial user namespace and no behavioral or performance changes are observed. The manpage with a detailed description can be found here: https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8 In order to support idmapped mounts, filesystems need to be changed and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The patches to convert individual filesystem are not very large or complicated overall as can be seen from the included fat, ext4, and xfs ports. Patches for other filesystems are actively worked on and will be sent out separately. The xfstestsuite can be used to verify that port has been done correctly. The mount_setattr() syscall is motivated independent of the idmapped mounts patches and it's been around since July 2019. One of the most valuable features of the new mount api is the ability to perform mounts based on file descriptors only. Together with the lookup restrictions available in the openat2() RESOLVE_* flag namespace which we added in v5.6 this is the first time we are close to hardened and race-free (e.g. symlinks) mounting and path resolution. While userspace has started porting to the new mount api to mount proper filesystems and create new bind-mounts it is currently not possible to change mount options of an already existing bind mount in the new mount api since the mount_setattr() syscall is missing. With the addition of the mount_setattr() syscall we remove this last restriction and userspace can now fully port to the new mount api, covering every use-case the old mount api could. We also add the crucial ability to recursively change mount options for a whole mount tree, both removing and adding mount options at the same time. This syscall has been requested multiple times by various people and projects. There is a simple tool available at https://github.com/brauner/mount-idmapped that allows to create idmapped mounts so people can play with this patch series. I'll add support for the regular mount binary should you decide to pull this in the following weeks: Here's an example to a simple idmapped mount of another user's home directory: u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt u1001@f2-vm:/$ ls -al /home/ubuntu/ total 28 drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 . drwxr-xr-x 4 root root 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ ls -al /mnt/ total 28 drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 . drwxr-xr-x 29 root root 4096 Oct 28 22:01 .. -rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile -rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ touch /mnt/my-file u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file u1001@f2-vm:/$ ls -al /mnt/my-file -rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file u1001@f2-vm:/$ ls -al /home/ubuntu/my-file -rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file u1001@f2-vm:/$ getfacl /mnt/my-file getfacl: Removing leading '/' from absolute path names # file: mnt/my-file # owner: u1001 # group: u1001 user::rw- user:u1001:rwx group::rw- mask::rwx other::r-- u1001@f2-vm:/$ getfacl /home/ubuntu/my-file getfacl: Removing leading '/' from absolute path names # file: home/ubuntu/my-file # owner: ubuntu # group: ubuntu user::rw- user:ubuntu:rwx group::rw- mask::rwx other::r--" * tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits) xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl xfs: support idmapped mounts ext4: support idmapped mounts fat: handle idmapped mounts tests: add mount_setattr() selftests fs: introduce MOUNT_ATTR_IDMAP fs: add mount_setattr() fs: add attr_flags_to_mnt_flags helper fs: split out functions to hold writers namespace: only take read lock in do_reconfigure_mnt() mount: make {lock,unlock}_mount_hash() static namespace: take lock_mount_hash() directly when changing flags nfs: do not export idmapped mounts overlayfs: do not mount on top of idmapped mounts ecryptfs: do not mount on top of idmapped mounts ima: handle idmapped mounts apparmor: handle idmapped mounts fs: make helpers idmap mount aware exec: handle idmapped mounts would_dump: handle idmapped mounts ...
2021-02-13ubifs: Fix error return code in alloc_wbufs()Wang ShaoBo1-1/+3
Fix to return PTR_ERR() error code from the error handling case instead fo 0 in function alloc_wbufs(), as done elsewhere in this function. Fixes: 6a98bc4614de ("ubifs: Add authentication nodes to journal") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12ubifs: Fix off-by-one errorSascha Hauer2-2/+2
An inode is allowed to have ubifs_xattr_max_cnt() xattrs, so we must complain only when an inode has more xattrs, having exactly ubifs_xattr_max_cnt() xattrs is fine. With this the maximum number of xattrs can be created without hitting the "has too many xattrs" warning when removing it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12ubifs: replay: Fix high stack usage, againArnd Bergmann1-1/+3
An earlier commit moved out some functions to not be inlined by gcc, but after some other rework to remove one of those, clang started inlining the other one and ran into the same problem as gcc did before: fs/ubifs/replay.c:1174:5: error: stack frame size of 1152 bytes in function 'ubifs_replay_journal' [-Werror,-Wframe-larger-than=] Mark the function as noinline_for_stack to ensure it doesn't happen again. Fixes: f80df3851246 ("ubifs: use crypto_shash_tfm_digest()") Fixes: eb66eff6636d ("ubifs: replay: Fix high stack usage") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12ubifs: Fix memleak in ubifs_init_authenticationDinghao Liu1-1/+1
When crypto_shash_digestsize() fails, c->hmac_tfm has not been freed before returning, which leads to memleak. Fixes: 49525e5eecca5 ("ubifs: Add helper functions for authentication support") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-24fs: make helpers idmap mount awareChristian Brauner3-15/+19
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24stat: handle idmapped mountsChristian Brauner1-1/+1
The generic_fillattr() helper fills in the basic attributes associated with an inode. Enable it to handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace before we store the uid and gid. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24acl: handle idmapped mountsChristian Brauner1-0/+1
The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24attr: handle idmapped mountsChristian Brauner1-1/+1
When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24inode: make init and permission helpers idmapped mount awareChristian Brauner2-2/+2
The inode_owner_or_capable() helper determines whether the caller is the owner of the inode or is capable with respect to that inode. Allow it to handle idmapped mounts. If the inode is accessed through an idmapped mount it according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Similarly, allow the inode_init_owner() helper to handle idmapped mounts. It initializes a new inode on idmapped mounts by mapping the fsuid and fsgid of the caller from the mount's user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-12-17Merge tag 'for-linus-5.11-rc1' of ↵Linus Torvalds19-124/+137
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull jffs2, ubi and ubifs updates from Richard Weinberger: "JFFS2: - Fix for a remount regression - Fix for an abnormal GC exit - Fix for a possible NULL pointer issue while mounting UBI: - Add support ECC-ed NOR flash - Removal of dead code UBIFS: - Make node dumping debug code more reliable - Various cleanups: less ifdefs, less typos - Fix for an info leak" * tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: ubifs_dump_node: Dump all branches of the index node ubifs: ubifs_dump_sleb: Remove unused function ubifs: Pass node length in all node dumping callers Revert "ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len" ubifs: Limit dumping length by size of memory which is allocated for the node ubifs: Remove the redundant return in dbg_check_nondata_nodes_order jffs2: Fix NULL pointer dereference in rp_size fs option parsing ubifs: Fixed print foramt mismatch in ubifs ubi: Do not zero out EC and VID on ECC-ed NOR flashes jffs2: remove trailing semicolon in macro definition ubifs: Fix error return code in ubifs_init_authentication() ubifs: wbuf: Don't leak kernel memory to flash ubi: Remove useless code in bytes_str_to_int ubifs: Fix the printing type of c->big_lpt jffs2: Allow setting rp_size to zero during remounting jffs2: Fix ignoring mounting options problem during remounting jffs2: Fix GC exit abnormally ubifs: Code cleanup by removing ifdef macro surrounding jffs2: Fix if/else empty body warnings ubifs: Delete duplicated words + other fixes
2020-12-17Merge tag 'f2fs-for-5.11-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've made more work into per-file compression support. For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to change the algorithm or cluster size per file. F2FS_IOC_COMPRESS | DECOMPRESS_FILE provides a way to compress and decompress the existing normal files manually. There is also a new mount option, compress_mode=fs|user, which can control who compresses the data. Chao also added a checksum feature with a mount option so that we are able to detect any corrupted cluster. In addition, Daniel contributed casefolding with encryption patch, which will be used for Android devices. Summary: Enhancements: - add ioctls and mount option to manage per-file compression feature - support casefolding with encryption - support checksum for compressed cluster - avoid IO starvation by replacing mutex with rwsem - add sysfs, max_io_bytes, to control max bio size Bug fixes: - fix use-after-free issue when compression and fsverity are enabled - fix consistency corruption during fault injection test - fix data offset for lseek - get rid of buffer_head which has 32bits limit in fiemap - fix some bugs in multi-partitions support - fix nat entry count calculation in shrinker - fix some stat information And, we've refactored some logics and fix minor bugs as well" * tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits) f2fs: compress: fix compression chksum f2fs: fix shift-out-of-bounds in sanity_check_raw_super() f2fs: fix race of pending_pages in decompression f2fs: fix to account inline xattr correctly during recovery f2fs: inline: fix wrong inline inode stat f2fs: inline: correct comment in f2fs_recover_inline_data f2fs: don't check PAGE_SIZE again in sanity_check_raw_super() f2fs: convert to F2FS_*_INO macro f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size f2fs: don't allow any writes on readonly mount f2fs: avoid race condition for shrinker count f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE f2fs: add compress_mode mount option f2fs: Remove unnecessary unlikely() f2fs: init dirty_secmap incorrectly f2fs: remove buffer_head which has 32bits limit f2fs: fix wrong block count instead of bytes f2fs: use new conversion functions between blks and bytes f2fs: rename logical_to_blk and blk_to_logical f2fs: fix kbytes written stat for multi-device case ...
2020-12-14Merge branch 'linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add speed testing on 1420-byte blocks for networking Algorithms: - Improve performance of chacha on ARM for network packets - Improve performance of aegis128 on ARM for network packets Drivers: - Add support for Keem Bay OCS AES/SM4 - Add support for QAT 4xxx devices - Enable crypto-engine retry mechanism in caam - Enable support for crypto engine on sdm845 in qce - Add HiSilicon PRNG driver support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits) crypto: qat - add capability detection logic in qat_4xxx crypto: qat - add AES-XTS support for QAT GEN4 devices crypto: qat - add AES-CTR support for QAT GEN4 devices crypto: atmel-i2c - select CONFIG_BITREVERSE crypto: hisilicon/trng - replace atomic_add_return() crypto: keembay - Add support for Keem Bay OCS AES/SM4 dt-bindings: Add Keem Bay OCS AES bindings crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd crypto: seed - remove trailing semicolon in macro definition crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg crypto: cpt - Fix sparse warnings in cptpf hwrng: ks-sa - Add dependency on IOMEM and OF crypto: lib/blake2s - Move selftest prototype into header file crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata crypto: ecdh - avoid unaligned accesses in ecdh_set_secret() crypto: ccree - rework cache parameters handling crypto: cavium - Use dma_set_mask_and_coherent to simplify code crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code ...
2020-12-13ubifs: ubifs_dump_node: Dump all branches of the index nodeZhihao Cheng1-1/+1
An index node can have up to c->fanout branches, all branches should be displayed while dumping index node. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: ubifs_dump_sleb: Remove unused functionZhihao Cheng2-18/+0
Function ubifs_dump_sleb() is defined but unused, it can be removed. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: Pass node length in all node dumping callersZhihao Cheng15-52/+54
Function ubifs_dump_node() has been modified to avoid memory oob accessing while dumping node, node length (corresponding to the size of allocated memory for node) should be passed into all node dumping callers. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13Revert "ubifs: Fix out-of-bounds memory access caused by abnormal value of ↵Zhihao Cheng1-14/+2
node_len" This reverts commit acc5af3efa30 ("ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len") No need to avoid memory oob in dumping for data node alone. Later, node length will be passed into function 'ubifs_dump_node()' which replaces all node dumping places. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: Limit dumping length by size of memory which is allocated for the nodeZhihao Cheng2-14/+52
To prevent memory out-of-bounds accessing in ubifs_dump_node(), actual dumping length should be restricted by another condition(size of memory which is allocated for the node). This patch handles following situations (These situations may be caused by bit flipping due to hardware error, writing bypass ubifs, unknown bugs in ubifs, etc.): 1. bad node_len: Dumping data according to 'ch->len' which may exceed the size of memory allocated for node. 2. bad node content: Some kinds of node can record additional data, eg. index node and orphan node, make sure the size of additional data not beyond the node length. 3. node_type changes: Read data according to type A, but expected type B, before that, node is allocated according to type B's size. Length of type A node is greater than type B node. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: Remove the redundant return in dbg_check_nondata_nodes_orderChengsong Ke1-1/+0
There is a redundant return in dbg_check_nondata_nodes_order, which will be never reached. In addition, error code should be returned instead of zero in this branch. Signed-off-by: Chengsong Ke <kechengsong@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: Fixed print foramt mismatch in ubifsFangping Liang1-1/+1
fs/ubifs/super.c: function mount_ubifs: the format specifier "lld" need arg type "long long", but the according arg "old_idx_sz" has type "unsigned long long" Signed-off-by: Fangping Liang <liangfangping@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: Fix error return code in ubifs_init_authentication()Wang ShaoBo1-1/+3
Fix to return PTR_ERR() error code from the error handling case where ubifs_hash_get_desc() failed instead of 0 in ubifs_init_authentication(), as done elsewhere in this function. Fixes: 49525e5eecca5 ("ubifs: Add helper functions for authentication support") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: wbuf: Don't leak kernel memory to flashRichard Weinberger1-2/+11
Write buffers use a kmalloc()'ed buffer, they can leak up to seven bytes of kernel memory to flash if writes are not aligned. So use ubifs_pad() to fill these gaps with padding bytes. This was never a problem while scanning because the scanner logic manually aligns node lengths and skips over these gaps. Cc: <stable@vger.kernel.org> Fixes: 1e51764a3c2ac05a2 ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: Fix the printing type of c->big_lptChengsong Ke2-3/+3
Ubifs uses %d to print c->big_lpt, but c->big_lpt is a variable of type unsigned int and should be printed with %u. Signed-off-by: Chengsong Ke <kechengsong@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: Code cleanup by removing ifdef macro surroundingChengguang Xu4-10/+4
Define ubifs_listxattr and ubifs_xattr_handlers to NULL when CONFIG_UBIFS_FS_XATTR is not enabled, then we can remove many ugly ifdef macros in the code. Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubifs: Delete duplicated words + other fixesRandy Dunlap7-8/+7
Delete repeated words in fs/ubifs/. {negative, is, of, and, one, it} where "it it" was changed to "if it". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> To: linux-fsdevel@vger.kernel.org Cc: Richard Weinberger <richard@nod.at> Cc: linux-mtd@lists.infradead.org Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-02fscrypt: Have filesystems handle their d_opsDaniel Rosenberg1-0/+1
This shifts the responsibility of setting up dentry operations from fscrypt to the individual filesystems, allowing them to have their own operations while still setting fscrypt's d_revalidate as appropriate. Most filesystems can just use generic_set_encrypted_ci_d_ops, unless they have their own specific dentry operations as well. That operation will set the minimal d_ops required under the circumstances. Since the fscrypt d_ops are set later on, we must set all d_ops there, since we cannot adjust those later on. This should not result in any change in behavior. Signed-off-by: Daniel Rosenberg <drosen@google.com> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-12-02fscrypt: introduce fscrypt_prepare_readdir()Eric Biggers1-1/+1
The last remaining use of fscrypt_get_encryption_info() from filesystems is for readdir (->iterate_shared()). Every other call is now in fs/crypto/ as part of some other higher-level operation. We need to add a new argument to fscrypt_get_encryption_info() to indicate whether the encryption policy is allowed to be unrecognized or not. Doing this is easier if we can work with high-level operations rather than direct filesystem use of fscrypt_get_encryption_info(). So add a function fscrypt_prepare_readdir() which wraps the call to fscrypt_get_encryption_info() for the readdir use case. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201203022041.230976-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-12-02ubifs: remove ubifs_dir_open()Eric Biggers1-9/+0
Since encrypted directories can be opened and searched without their key being available, and each readdir and ->lookup() tries to set up the key, trying to set up the key in ->open() too isn't really useful. Just remove it so that directories don't need an ->open() method anymore, and so that we eliminate a use of fscrypt_get_encryption_info() (which I'd like to stop exporting to filesystems). Link: https://lore.kernel.org/r/20201203022041.230976-4-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-24ubifs: prevent creating duplicate encrypted filenamesEric Biggers1-4/+13
As described in "fscrypt: add fscrypt_is_nokey_name()", it's possible to create a duplicate filename in an encrypted directory by creating a file concurrently with adding the directory's encryption key. Fix this bug on ubifs by rejecting no-key dentries in ubifs_create(), ubifs_mkdir(), ubifs_mknod(), and ubifs_symlink(). Note that ubifs doesn't actually report the duplicate filenames from readdir, but rather it seems to replace the original dentry with a new one (which is still wrong, just a different effect from ext4). On ubifs, this fixes xfstest generic/595 as well as the new xfstest I wrote specifically for this bug. Fixes: f4f61d2cc6d8 ("ubifs: Implement encrypted filenames") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201118075609.120337-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers1-1/+0
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-18Merge tag 'for-linus-5.10-rc1-part2' of ↵Linus Torvalds6-4/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull more ubi and ubifs updates from Richard Weinberger: "UBI: - Correctly use kthread_should_stop in ubi worker UBIFS: - Fixes for memory leaks while iterating directory entries - Fix for a user triggerable error message - Fix for a space accounting bug in authenticated mode" * tag 'for-linus-5.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: journal: Make sure to not dirty twice for auth nodes ubifs: setflags: Don't show error message when vfs_ioc_setflags_prepare() fails ubifs: ubifs_jnl_change_xattr: Remove assertion 'nlink > 0' for host inode ubi: check kthread_should_stop() after the setting of task state ubifs: dent: Fix some potential memory leaks while iterating entries ubifs: xattr: Fix some potential memory leaks while iterating entries
2020-10-18Merge tag 'for-linus-5.10-rc1' of ↵Linus Torvalds5-21/+34
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull ubifs updates from Richard Weinberger: - Kernel-doc fixes - Fixes for memory leaks in authentication option parsing * tag 'for-linus-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: mount_ubifs: Release authentication resource in error handling path ubifs: Don't parse authentication mount options in remount process ubifs: Fix a memleak after dumping authentication mount options ubifs: Fix some kernel-doc warnings in tnc.c ubifs: Fix some kernel-doc warnings in replay.c ubifs: Fix some kernel-doc warnings in gc.c ubifs: Fix 'hash' kernel-doc warning in auth.c
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+2
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-11ubifs: mount_ubifs: Release authentication resource in error handling pathZhihao Cheng1-4/+6
Release the authentication related resource in some error handling branches in mount_ubifs(). Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> # 4.20+ Fixes: d8a22773a12c6d7 ("ubifs: Enable authentication support") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-10-11ubifs: Don't parse authentication mount options in remount processZhihao Cheng1-6/+12
There is no need to dump authentication options while remounting, because authentication initialization can only be doing once in the first mount process. Dumping authentication mount options in remount process may cause memory leak if UBIFS has already been mounted with old authentication mount options. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> # 4.20+ Fixes: d8a22773a12c6d7 ("ubifs: Enable authentication support") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-10-11ubifs: Fix a memleak after dumping authentication mount optionsZhihao Cheng1-2/+14
Fix a memory leak after dumping authentication mount options in error handling branch. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> # 4.20+ Fixes: d8a22773a12c6d7 ("ubifs: Enable authentication support") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 17:42:36 +0000