summaryrefslogtreecommitdiff
path: root/fs/ocfs2
AgeCommit message (Collapse)AuthorFilesLines
2016-01-22wrappers for ->i_mutex accessAl Viro15-97/+97
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-21ocfs2: NFS hangs in __ocfs2_cluster_lock due to race with ocfs2_unblock_lockTariq Saeed1-0/+6
NFS on a 2 node ocfs2 cluster each node exporting dir. The lock causing the hang is the global bit map inode lock. Node 1 is master, has the lock granted in PR mode; Node 2 is in the converting list (PR -> EX). There are no holders of the lock on the master node so it should downconvert to NL and grant EX to node 2 but that does not happen. BLOCKED + QUEUED in lock res are set and it is on osb blocked list. Threads are waiting in __ocfs2_cluster_lock on BLOCKED. One thread wants EX, rest want PR. So it is as though the downconvert thread needs to be kicked to complete the conv. The hang is caused by an EX req coming into __ocfs2_cluster_lock on the heels of a PR req after it sets BUSY (drops l_lock, releasing EX thread), forcing the incoming EX to wait on BUSY without doing anything. PR has called ocfs2_dlm_lock, which sets the node 1 lock from NL -> PR, queues ast. At this time, upconvert (PR ->EX) arrives from node 2, finds conflict with node 1 lock in PR, so the lock res is put on dlm thread's dirty listt. After ret from ocf2_dlm_lock, PR thread now waits behind EX on BUSY till awoken by ast. Now it is dlm_thread that serially runs dlm_shuffle_lists, ast, bast, in that order. dlm_shuffle_lists ques a bast on behalf of node 2 (which will be run by dlm_thread right after the ast). ast does its part, sets UPCONVERT_FINISHING, clears BUSY and wakes its waiters. Next, dlm_thread runs bast. It sets BLOCKED and kicks dc thread. dc thread runs ocfs2_unblock_lock, but since UPCONVERT_FINISHING set, skips doing anything and reques. Inside of __ocfs2_cluster_lock, since EX has been waiting on BUSY ahead of PR, it wakes up first, finds BLOCKED set and skips doing anything but clearing UPCONVERT_FINISHING (which was actually "meant" for the PR thread), and this time waits on BLOCKED. Next, the PR thread comes out of wait but since UPCONVERT_FINISHING is not set, it skips updating the l_ro_holders and goes straight to wait on BLOCKED. So there, we have a hang! Threads in __ocfs2_cluster_lock wait on BLOCKED, lock res in osb blocked list. Only when dc thread is awoken, it will run ocfs2_unblock_lock and things will unhang. One way to fix this is to wake the dc thread on the flag after clearing UPCONVERT_FINISHING Orabug: 20933419 Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Introduce configfs support for unlocked configfs_depend_item() (krzysztof + andrezej) - Conversion of usb-gadget target driver to new function registration interface (andrzej + sebastian) - Enable qla2xxx FC target mode support for Extended Logins (himansu + giridhar) - Enable qla2xxx FC target mode support for Exchange Offload (himansu + giridhar) - Add qla2xxx FC target mode irq affinity notification + selective command queuing. (quinn + himanshu) - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi + nab) - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to proper se_session->sess_kref + target_get_session() usage. (hch + sagi + nab) - Fix long-standing race between se_node_acl->acl_kref get and get_initiator_node_acl() lookup. (hch + nab) - Fix target/user block-size handling, and make sure netlink reaches all network namespaces (sheng + andy) Note there is an outstanding bug-fix series for remote I_T nexus port TMR LUN_RESET has been posted and still being tested, and will likely become post -rc1 material at this point" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits) scsi: qla2xxxx: avoid type mismatch in comparison target/user: Make sure netlink would reach all network namespaces target: Obtain se_node_acl->acl_kref during get_initiator_node_acl target: Convert ACL change queue_depth se_session reference usage iscsi-target: Fix potential dead-lock during node acl delete ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Wait for command completion before freeing a session target: Fix a memory leak in target_dev_lba_map_store() target: Support aborting tasks with a 64-bit tag usb/gadget: Remove set-but-not-used variables target: Remove an unused variable target: Fix indentation in target_core_configfs.c target/user: Allow user to set block size before enabling device iser-target: Fix non negative ERR_PTR isert_device_get usage target/fcoe: Add tag support to tcm_fc qla2xxx: Check for online flag instead of active reset when transmitting responses qla2xxx: Set all queues to 4k qla2xxx: Disable ZIO at start time. qla2xxx: Move atioq to a different lock to reduce lock contention ...
2016-01-15Merge branch 'for_linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fixes and quota cleanups from Jan Kara: "Several UDF fixes and some minor quota cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Check output buffer length when converting name to CS0 udf: Prevent buffer overrun with multi-byte characters quota: constify qtree_fmt_operations structures udf: avoid uninitialized variable use udf: Fix lost indirect extent block udf: Factor out code for creating indirect extent udf: limit the maximum number of indirect extents in a row udf: limit the maximum number of TD redirections fs: make quota/dquot.c explicitly non-modular fs: make quota/netlink.c explicitly non-modular
2016-01-14kmemcg: account certain kmem allocations to memcgVladimir Davydov2-2/+2
Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2/dlm: cleanup redunant lksb flags in dlmcommon.hJoseph Qi1-11/+0
lksb flags are defined both in dlmapi.h and dlmcommon.h. So clean them up from dlmcommon.h. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Jiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: dlm: remove redundant codeJunxiao Bi1-5/+1
Found this when do patch review, remove to make it clear and save a little cpu time. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: access orphan dinode before delete entry in ocfs2_orphan_delJoseph Qi1-9/+9
In ocfs2_orphan_del, currently it finds and deletes entry first, and then access orphan dir dinode. This will have a problem once ocfs2_journal_access_di fails. In this case, entry will be removed from orphan dir, but in deed the inode hasn't been deleted successfully. In other words, the file is missing but not actually deleted. So we should access orphan dinode first like unlink and rename. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Jiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2/dlm: do not insert a new mle when another process is already migratingxuejiufei1-2/+3
When two processes are migrating the same lockres, dlm_add_migration_mle() return -EEXIST, but insert a new mle in hash list. dlm_migrate_lockres() will detach the old mle and free the new one which is already in hash list, that will destroy the list. Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2/dlm: ignore cleaning the migration mle that is inusexuejiufei1-11/+15
We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: do not lock/unlock() inode DLM lockGoldwyn Rodrigues1-8/+0
DLM does not cache locks. So, blocking lock and unlock will only make the performance worse where contention over the locks is high. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: fix slot overwritten if storage link down during mountjiangyiwen1-1/+10
The following case will lead to slot overwritten. N1 N2 mount ocfs2 volume, find and allocate slot 0, then set osb->slot_num to 0, begin to write slot info to disk mount ocfs2 volume, wait for super lock write block fail because of storage link down, unlock super lock got super lock and also allocate slot 0 then unlock super lock mount fail and then dismount, since osb->slot_num is 0, try to put invalid slot to disk. And it will succeed if storage link restores. N2 slot info is now overwritten Once another node say N3 mount, it will find and allocate slot 0 again, which will lead to mount hung because journal has already been locked by N2. so when write slot info failed, invalidate slot in advance to avoid overwrite slot. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2/dlm: return appropriate value when dlm_grab() returns NULLXue jiufei2-2/+2
dlm_grab() may return NULL when the node is doing unmount. When doing code review, we found that some dlm handlers may return error to caller when dlm_grab() returns NULL and make caller BUG or other problems. Here is an example: Node 1 Node 2 receives migration message from node 3, and send migrate request to others start unmounting receives migrate request from node 1 and call dlm_migrate_request_handler() unmount thread unregisters domain handlers and removes dlm_context from dlm_domains dlm_migrate_request_handlers() returns -EINVAL to node 1 Exit migration neither clearing the migration state nor sending assert master message to node 3 which cause node 3 hung. Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: clean up redundant NULL check before iputJoseph Qi7-25/+11
Since iput will take care the NULL check itself, NULL check before calling it is redundant. So clean them up. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2/dlm: wait until DLM_LOCK_RES_SETREF_INPROG is cleared in ↵jiangyiwen1-1/+1
dlm_deref_lockres_worker Commit f3f854648de6 ("ocfs2_dlm: Ensure correct ordering of set/clear refmap bit on lockres") still exists a race which can't ensure the ordering is exactly correct. Node1 Node2 Node3 umount, migrate lockres to Node2 migrate finished, send migrate request to Node3 received migrate request, create a migration_mle, respond to Node2. set DLM_LOCK_RES_SETREF_INPROG and send assert master to Node3 delete migration_mle in assert_master_handler, Node3 umount without response dlm_thread purge this lockres, send drop deref message to Node2 found the flag of DLM_LOCK_RES_SETREF_INPROG is set, dispatch dlm_deref_lockres_worker to clear refmap, but in function of dlm_deref_lockres_worker, only if node in refmap it wait DLM_LOCK_RES_SETREF_INPROG to be cleared. So worker is done successfully purge lockres, send assert master response to Node1, and finish umount set Node3 in refmap, and it won't be cleared forever, thus lead to umount hung so wait until DLM_LOCK_RES_SETREF_INPROG is cleared in dlm_deref_lockres_worker. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: constify ocfs2_extent_tree_operations structuresJulia Lawall2-7/+7
The ocfs2_extent_tree_operations structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2/dlm: fix a race between purge and migrationXue jiufei1-1/+8
We found a race between purge and migration when doing code review. Node A put lockres to purgelist before receiving the migrate message from node B which is the master. Node A call dlm_mig_lockres_handler to handle this message. dlm_mig_lockres_handler dlm_lookup_lockres >>>>>> race window, dlm_run_purge_list may run and send deref message to master, waiting the response spin_lock(&res->spinlock); res->state |= DLM_LOCK_RES_MIGRATING; spin_unlock(&res->spinlock); dlm_mig_lockres_handler returns >>>>>> dlm_thread receives the response from master for the deref message and triggers the BUG because the lockres has the state DLM_LOCK_RES_MIGRATING with the following message: dlm_purge_lockres:209 ERROR: 6633EB681FA7474A9C280A4E1A836F0F: res M0000000000000000030c0300000000 in use after deref Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: o2hb: increase unsteady iterationsJunxiao Bi1-2/+2
When run multiple xattr test of ocfs2-test on a three-nodes cluster, mount failed sometimes with the following message. o2hb: Unable to stabilize heartbeart on region D18B775E758D4D80837E8CF3D086AD4A (xvdb) Stabilize heartbeat depends on the timing order to mount ocfs2 from cluster nodes and how fast the tcp connections are established. So increase unsteady interations to leave more time for it. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: return non-zero st_blocks for inline dataJohn Haxby1-0/+8
Some versions of tar assume that files with st_blocks == 0 do not contain any data and will skip reading them entirely. See also commit 9206c561554c ("ext4: return non-zero st_blocks for inline data"). Signed-off-by: John Haxby <john.haxby@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: Gang He <ghe@suse.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14ocfs2: optimize bad declarations and redundant assignmentNorton.Zhu1-6/+2
In ocfs2_parse_options, a) it's better to declare variables(small size) outside of while loop; b) 'option' will be set by match_int, 'option = 0;' makes no sense, if match_int failed, it just goto bail and return. Signed-off-by: Norton.Zhu <norton.zhu@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-11Merge branch 'work.xattr' of ↵Linus Torvalds1-110/+58
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs xattr updates from Al Viro: "Andreas' xattr cleanup series. It's a followup to his xattr work that went in last cycle; -0.5KLoC" * 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xattr handlers: Simplify list operation ocfs2: Replace list xattr handler operations nfs: Move call to security_inode_listsecurity into nfs_listxattr xfs: Change how listxattr generates synthetic attributes tmpfs: listxattr should include POSIX ACL xattrs tmpfs: Use xattr handler infrastructure btrfs: Use xattr handler infrastructure vfs: Distinguish between full xattr names and proper prefixes posix acls: Remove duplicate xattr name definitions gfs2: Remove gfs2_xattr_acl_chmod vfs: Remove vfs_xattr_cmp
2016-01-11Merge branch 'work.symlinks' of ↵Linus Torvalds3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs RCU symlink updates from Al Viro: "Replacement of ->follow_link/->put_link, allowing to stay in RCU mode even if the symlink is not an embedded one. No changes since the mailbomb on Jan 1" * 'work.symlinks' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch ->get_link() to delayed_call, kill ->put_link() kill free_page_put_link() teach nfs_get_link() to work in RCU mode teach proc_self_get_link()/proc_thread_self_get_link() to work in RCU mode teach shmem_get_link() to work in RCU mode teach page_get_link() to work in RCU mode replace ->follow_link() with new method that could stay in RCU mode don't put symlink bodies in pagecache into highmem namei: page_getlink() and page_follow_link_light() are the same thing ufs: get rid of ->setattr() for symlinks udf: don't duplicate page_symlink_inode_operations logfs: don't duplicate page_symlink_inode_operations switch befs long symlinks to page_symlink_operations
2016-01-04quota: constify qtree_fmt_operations structuresJulia Lawall2-2/+2
The qtree_fmt_operations structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jan Kara <jack@suse.cz>
2015-12-30switch ->get_link() to delayed_call, kill ->put_link()Al Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-29ocfs2/dlm: clear migration_pending when migration target goes downxuejiufei1-0/+2
We have found a BUG on res->migration_pending when migrating lock resources. The situation is as follows. dlm_mark_lockres_migration res->migration_pending = 1; __dlm_lockres_reserve_ast dlm_lockres_release_ast returns with res->migration_pending remains because other threads reserve asts wait dlm_migration_can_proceed returns 1 >>>>>>> o2hb found that target goes down and remove target from domain_map dlm_migration_can_proceed returns 1 dlm_mark_lockres_migrating returns -ESHOTDOWN with res->migration_pending still remains. When reentering dlm_mark_lockres_migrating(), it will trigger the BUG_ON with res->migration_pending. So clear migration_pending when target is down. Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-29ocfs2: fix flock panic issueJunxiao Bi1-1/+4
Commit 4f6563677ae8 ("Move locks API users to locks_lock_inode_wait()") move flock/posix lock indentify code to locks_lock_inode_wait(), but missed to set fl_flags to FL_FLOCK which caused the following kernel panic on 4.4.0_rc5. kernel BUG at fs/locks.c:1895! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2(O) ocfs2_dlmfs(O) ocfs2_stack_o2cb(O) ocfs2_dlm(O) ocfs2_nodemanager(O) ocfs2_stackglue(O) iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront CPU: 0 PID: 20268 Comm: flock_unit_test Tainted: G O 4.4.0-rc5-next-20151217 #1 Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 task: ffff88007b3672c0 ti: ffff880028b58000 task.ti: ffff880028b58000 RIP: locks_lock_inode_wait+0x2e/0x160 Call Trace: ocfs2_do_flock+0x91/0x160 [ocfs2] ocfs2_flock+0x76/0xd0 [ocfs2] SyS_flock+0x10f/0x1a0 entry_SYSCALL_64_fastpath+0x12/0x71 Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 48 81 ec 88 00 00 00 8b 46 40 83 e0 03 83 f8 01 0f 84 ad 00 00 00 83 f8 02 74 04 <0f> 0b eb fe 4c 8d ad 60 ff ff ff 4c 8d 7b 58 e8 0e 8e 73 00 4d RIP locks_lock_inode_wait+0x2e/0x160 RSP <ffff880028b5bce8> ---[ end trace dfca74ec9b5b274c ]--- Fixes: 4f6563677ae8 ("Move locks API users to locks_lock_inode_wait()") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-29ocfs2: fix BUG when calculate new backup superJoseph Qi1-3/+12
When resizing, it firstly extends the last gd. Once it should backup super in the gd, it calculates new backup super and update the corresponding value. But it currently doesn't consider the situation that the backup super is already done. And in this case, it still sets the bit in gd bitmap and then decrease from bg_free_bits_count, which leads to a corrupted gd and trigger the BUG in ocfs2_block_group_set_bits: BUG_ON(le16_to_cpu(bg->bg_free_bits_count) < num_bits); So check whether the backup super is done and then do the updates. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-20fs: configfs: Drop unused parameter from configfs_undepend_item()Krzysztof Opasiak1-1/+1
subsys parameter is never used by configfs_undepend_item() so there is no point in passing it to this function. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-12-13ocfs2: Replace list xattr handler operationsAndreas Gruenbacher1-94/+57
The list operations of the ocfs2 xattr handlers were never called anywhere. Remove them and directly check in ocfs2_xattr_list_entry which attributes should be skipped over instead. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-12ocfs2: fix SGID not inherited issueJunxiao Bi1-3/+1
Commit 8f1eb48758aa ("ocfs2: fix umask ignored issue") introduced an issue, SGID of sub dir was not inherited from its parents dir. It is because SGID is set into "inode->i_mode" in ocfs2_get_init_inode(), but is overwritten by "mode" which don't have SGID set later. Fixes: 8f1eb48758aa ("ocfs2: fix umask ignored issue") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-08replace ->follow_link() with new method that could stay in RCU modeAl Viro1-1/+1
new method: ->get_link(); replacement of ->follow_link(). The differences are: * inode and dentry are passed separately * might be called both in RCU and non-RCU mode; the former is indicated by passing it a NULL dentry. * when called that way it isn't allowed to block and should return ERR_PTR(-ECHILD) if it needs to be called in non-RCU mode. It's a flagday change - the old method is gone, all in-tree instances converted. Conversion isn't hard; said that, so far very few instances do not immediately bail out when called in RCU mode. That'll change in the next commits. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08don't put symlink bodies in pagecache into highmemAl Viro2-0/+2
kmap() in page_follow_link_light() needed to go - allowing to hold an arbitrary number of kmaps for long is a great way to deadlocking the system. new helper (inode_nohighmem(inode)) needs to be used for pagecache symlinks inodes; done for all in-tree cases. page_follow_link_light() instrumented to yell about anything missed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06vfs: Distinguish between full xattr names and proper prefixesAndreas Gruenbacher1-16/+1
Add an additional "name" field to struct xattr_handler. When the name is set, the handler matches attributes with exactly that name. When the prefix is set instead, the handler matches attributes with the given prefix and with a non-empty suffix. This patch should avoid bugs like the one fixed in commit c361016a in the future. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-20ocfs2: fix umask ignored issueJunxiao Bi1-0/+2
New created file's mode is not masked with umask, and this makes umask not work for ocfs2 volume. Fixes: 702e5bc ("ocfs2: use generic posix ACL infrastructure") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-13Merge branch 'for-next' of ↵Linus Torvalds2-374/+112
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This series contains HCH's changes to absorb configfs attribute ->show() + ->store() function pointer usage from it's original tree-wide consumers, into common configfs code. It includes usb-gadget, target w/ drivers, netconsole and ocfs2 changes to realize the improved simplicity, that now renders the original include/target/configfs_macros.h CPP magic for fabric drivers and others, unnecessary and obsolete. And with common code in place, new configfs attributes can be added easier than ever before. Note, there are further improvements in-flight from other folks for v4.5 code in configfs land, plus number of target fixes for post -rc1 code" In the meantime, a new user of the now-removed old configfs API came in through the char/misc tree in commit 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices"). This merge resolution comes from Alexander Shishkin, who updated his stm class tracing abstraction to account for the removal of the old show_attribute and store_attribute methods in commit 517982229f78 ("configfs: remove old API") from this pull. As Alexander says about that patch: "There's no need to keep an extra wrapper structure per item and the awkward show_attribute/store_attribute item ops are no longer needed. This patch converts policy code to the new api, all the while making the code quite a bit smaller and easier on the eyes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>" That patch was folded into the merge so that the tree should be fully bisectable. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits) configfs: remove old API ocfs2/cluster: use per-attribute show and store methods ocfs2/cluster: move locking into attribute store methods netconsole: use per-attribute show and store methods target: use per-attribute show and store methods spear13xx_pcie_gadget: use per-attribute show and store methods dlm: use per-attribute show and store methods usb-gadget/f_serial: use per-attribute show and store methods usb-gadget/f_phonet: use per-attribute show and store methods usb-gadget/f_obex: use per-attribute show and store methods usb-gadget/f_uac2: use per-attribute show and store methods usb-gadget/f_uac1: use per-attribute show and store methods usb-gadget/f_mass_storage: use per-attribute show and store methods usb-gadget/f_sourcesink: use per-attribute show and store methods usb-gadget/f_printer: use per-attribute show and store methods usb-gadget/f_midi: use per-attribute show and store methods usb-gadget/f_loopback: use per-attribute show and store methods usb-gadget/ether: use per-attribute show and store methods usb-gadget/f_acm: use per-attribute show and store methods usb-gadget/f_hid: use per-attribute show and store methods ...
2015-11-13xattr handlers: Pass handler to operations instead of flagsAndreas Gruenbacher1-18/+27
The xattr_handler operations are currently all passed a file system specific flags value which the operations can use to disambiguate between different handlers; some file systems use that to distinguish the xattr namespace, for example. In some oprations, it would be useful to also have access to the handler prefix. To allow that, pass a pointer to the handler to operations instead of the flags value alone. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds12-59/+107
Merge patch-bomb from Andrew Morton: - inotify tweaks - some ocfs2 updates (many more are awaiting review) - various misc bits - kernel/watchdog.c updates - Some of mm. I have a huge number of MM patches this time and quite a lot of it is quite difficult and much will be held over to next time. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) selftests: vm: add tests for lock on fault mm: mlock: add mlock flags to enable VM_LOCKONFAULT usage mm: introduce VM_LOCKONFAULT mm: mlock: add new mlock system call mm: mlock: refactor mlock, munlock, and munlockall code kasan: always taint kernel on report mm, slub, kasan: enable user tracking by default with KASAN=y kasan: use IS_ALIGNED in memory_is_poisoned_8() kasan: Fix a type conversion error lib: test_kasan: add some testcases kasan: update reference to kasan prototype repo kasan: move KASAN_SANITIZE in arch/x86/boot/Makefile kasan: various fixes in documentation kasan: update log messages kasan: accurately determine the type of the bad access kasan: update reported bug types for kernel memory accesses kasan: update reported bug types for not user nor kernel memory accesses mm/kasan: prevent deadlock in kasan reporting mm/kasan: don't use kasan shadow pointer in generic functions mm/kasan: MODULE_VADDR is not available on all archs ...
2015-11-05ocfs2: clean up unused variable in ocfs2_duplicate_clusters_by_page()Joseph Qi1-4/+1
readahead_pages in ocfs2_duplicate_clusters_by_page is defined but not used, so clean it up. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: add uuid to ocfs2 thread name for problem analysisJoseph Qi5-6/+10
A node can mount multiple ocfs2 volumes. And if thread names are same for each volume/domain, it will bring inconvenience when analyzing problems because we have to identify which volume/domain the messages belong to. Since thread name will be printed to messages, so add volume uuid or dlm name to thread name can benefit problem analysis. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Gang He <ghe@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an erroralex chen1-1/+10
In ocfs2_mknod_locked if '__ocfs2_mknod_locke d' returns an error, we should reclaim the inode successfully claimed above, otherwise, the inode never be reused. The case is described below: ocfs2_mknod ocfs2_mknod_locked ocfs2_claim_new_inode Successfully claim the inode __ocfs2_mknod_locked ocfs2_journal_access_di Failed because of -ENOMEM or other reasons, the inode lockres has not been initialized yet. iput(inode) ocfs2_evict_inode ocfs2_delete_inode ocfs2_inode_lock ocfs2_inode_lock_full_nested __ocfs2_cluster_lock Return -EINVAL because of the inode lockres has not been initialized. So the following operations are not performed ocfs2_wipe_inode ocfs2_remove_inode ocfs2_free_dinode ocfs2_free_suballoc_bits Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: fix race between mount and delete node/clusterJoseph Qi1-3/+16
There is a race case between mount and delete node/cluster, which will lead o2hb_thread to malfunctioning dead loop. o2hb_thread { o2nm_depend_this_node(); <<<<<< race window, node may have already been deleted, and then enter the loop, o2hb thread will be malfunctioning because of no configured nodes found. while (!kthread_should_stop() && !reg->hr_unclean_stop && !reg->hr_aborted_start) { } So check the return value of o2nm_depend_this_node() is needed. If node has been deleted, do not enter the loop and let mount fail. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: only take lock if dio entry when recover orphansJoseph Qi2-39/+49
We have no need to take inode mutex, rw and inode lock if it is not dio entry when recover orphans. Optimize it by adding a flag OCFS2_INODE_DIO_ORPHAN_ENTRY to ocfs2_inode_info to reduce contention. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: do not include dio entry in case of orphan scanJoseph Qi3-5/+15
dio entry will only do truncate in case of ORPHAN_NEED_TRUNCATE. So do not include it when doing normal orphan scan to reduce contention. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: improve performance for localallocJoseph Qi1-1/+4
Currently cluster allocation is always trying to find a victim chain (a chian has most space), and this may lead to poor performance because of discontiguous allocation in some scenarios. Our test case is block size 4k, cluster size 1M and mount option with localalloc=2048 (2G), since a gd is 32256M (about 31.5G) and a localalloc window is only 2G, creating 50G file will result in 2G from gd0, 2G from gd1, ... One way to improve performance is enlarge localalloc window size (max 31104M), but this will make end user feel that about 30G is suddenly "missing", and localalloc currently do not support steal, which means one node cannot use another node's localalloc even it is not used in fact. So using the last gd to record the allocation and continues with the gd if it has enough space for a localalloc window can make the allocation as more contiguous as possible. Our test result is below (evaluated in IOPS), which is using iometer running in VM, dynamic vhd virtual disk stored in ocfs2. IO model Original After Improved(%) 16K60%Write100%Random 703 876 24.59% 8K90%Write100%Random 735 827 12.59% 4K100%Write100%Random 859 915 6.52% 4K100%Read100%Random 2092 2600 24.30% Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Tested-by: Norton Zhu <norton.zhu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: fill in the unused portion of the block with zeros by dio_zero_block()jiangyiwen1-0/+1
A simplified test case is (this case from Ryan): 1) dd if=/dev/zero of=/mnt/hello bs=512 count=1 oflag=direct; 2) truncate /mnt/hello -s 2097152 file 'hello' is not exist before test. After this command, file 'hello' should be all zero. But 512~4096 is some random data. Setting bh state to new when get a new block, if so, direct_io_worker()->dio_zero_block() will fill-in the unused portion of the block with zero. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2_direct_IO_write() misses ocfs2_is_overwrite() error codeNorton.Zhu1-0/+1
If ocfs2_is_overwrite failed, ocfs2_direct_IO_write mays till return success to the caller. Signed-off-by: Norton.Zhu <norton.zhu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05Merge tag 'locks-v4.4-1' of git://git.samba.org/jlayton/linuxLinus Torvalds1-4/+4
Pull file locking updates from Jeff Layton: "The largest series of changes is from Ben who offered up a set to add a new helper function for setting locks based on the type set in fl_flags. Dmitry also send in a fix for a potential race that he found with KTSAN" * tag 'locks-v4.4-1' of git://git.samba.org/jlayton/linux: locks: cleanup posix_lock_inode_wait and flock_lock_inode_wait Move locks API users to locks_lock_inode_wait() locks: introduce locks_lock_inode_wait() locks: Use more file_inode and fix a comment fs: fix data races on inode->i_flctx locks: change tracepoint for generic_add_lease
2015-10-23ocfs2/dlm: unlock lockres spinlock before dlm_lockres_putJoseph Qi2-2/+3
dlm_lockres_put will call dlm_lockres_release if it is the last reference, and then it may call dlm_print_one_lock_resource and take lockres spinlock. So unlock lockres spinlock before dlm_lockres_put to avoid deadlock. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-22Move locks API users to locks_lock_inode_wait()Benjamin Coddington1-4/+4
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct locks API function, use the check within locks_lock_inode_wait(). This allows for some later cleanup. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-10-13ocfs2/cluster: use per-attribute show and store methodsChristoph Hellwig2-346/+100
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 04:16:08 +0000