summaryrefslogtreecommitdiff
path: root/fs/gfs2/acl.c
AgeCommit message (Collapse)AuthorFilesLines
2016-05-12gfs2: Switch to generic xattr handlersAl Viro1-11/+47
Switch to the generic xattr handlers and take the necessary glocks at the layer below. The following are the new xattr "entry points"; they are called with the glock held already in the following cases: gfs2_xattr_get: From SELinux, during lookups. gfs2_xattr_set: The glock is never held. gfs2_get_acl: From gfs2_create_inode -> posix_acl_create and gfs2_setattr -> posix_acl_chmod. gfs2_set_acl: From gfs2_setattr -> posix_acl_chmod. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06posix acls: Remove duplicate xattr name definitionsAndreas Gruenbacher1-2/+2
Remove POSIX_ACL_XATTR_{ACCESS,DEFAULT} and GFS2_POSIX_ACL_{ACCESS,DEFAULT} and replace them with the definitions in <include/uapi/linux/xattr.h>. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18GFS2: gfs2_set_acl(): Cache "no acl" as wellAndreas Gruenbacher1-5/+1
When removing a default acl or setting an access acl that is entirely represented in the file mode, we end up with acl == NULL in gfs2_set_acl(). In that case, bring gfs2 in line with other file systems and cache the NULL acl with set_cached_acl() instead of invalidating the cache with forget_cached_acl(). Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-02-10GFS2: Fix crash during ACL deletion in acl max entry check in gfs2_set_acl()Andrew Elble1-1/+1
Fixes: e01580bf9e ("gfs2: use generic posix ACL infrastructure") Reported-by: Eric Meddaugh <etmsys@rit.edu> Tested-by: Eric Meddaugh <etmsys@rit.edu> Signed-off-by: Andrew Elble <aweits@rit.edu> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-19GFS2: inline function gfs2_set_modeBob Peterson1-15/+4
Here is a revised patch based on Steve's feedback: This patch eliminates function gfs2_set_mode which was only called in one place, and always returned 0. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-19GFS2: Increase the max number of ACLsBob Peterson1-1/+1
This patch increases the maximum number of ACLs from 25 to 300 for a 4K block size. The value is adjusted accordingly if the block size is smaller. Note that this is an arbitrary limit with a performance tradeoff, and that the physical limit is slightly over 500. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-06GFS2: return -E2BIG if hit the maximum limits of ACLsJie Liu1-1/+1
Return -E2BIG rather than -EINVAL if hit the maximum size limits of ACLs, as the former errno is consistent with VFS xattr syscalls. This is pointed out by Dave Chinner in previous discussion thread: http://www.spinics.net/lists/linux-fsdevel/msg71125.html Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-25gfs2: use generic posix ACL infrastructureChristoph Hellwig1-204/+30
This contains some major refactoring for the create path so that inodes are created with the right mode to start with instead of fixing it up later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-25fs: make posix_acl_create more usefulChristoph Hellwig1-1/+1
Rename the current posix_acl_created to __posix_acl_create and add a fully featured helper to set up the ACLs on file creation that uses get_acl(). Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-25fs: make posix_acl_chmod more usefulChristoph Hellwig1-1/+1
Rename the current posix_acl_chmod to __posix_acl_chmod and add a fully featured ACL chmod helper that uses the ->set_acl inode operation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-13gfs2: Use uid_eq and gid_eq where appropriateEric W. Biederman1-1/+1
Where kuid_t values are compared use uid_eq and where kgid_t values are compared use gid_eq. This is unfortunately necessary because of the type safety that keeps someone from accidentally mixing kuids and kgids with other types. Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Pass a userns parameter into posix_acl_to_xattr and posix_acl_from_xattrEric W. Biederman1-7/+7
- Pass the user namespace the uid and gid values in the xattr are stored in into posix_acl_from_xattr. - Pass the user namespace kuid and kgid values should be converted into when storing uid and gid values in an xattr in posix_acl_to_xattr. - Modify all callers of posix_acl_from_xattr and posix_acl_to_xattr to pass in &init_user_ns. In the short term this change is not strictly needed but it makes the code clearer. In the longer term this change is necessary to be able to mount filesystems outside of the initial user namespace that natively store posix acls in the linux xattr format. Cc: Theodore Tso <tytso@mit.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-05-04GFS2: Fix sgid propagation when using ACLsSteven Whitehouse1-9/+3
This cleans up the mode setting code when creating inodes. The SGID bit was being reset by setattr_copy() when the user creating a subdirectory was not in the owning group. When ACLs are in use this SGID bit should have been propagated if the ACL allows creation of a subdirectory. GFS2's behaviour now matches that of the other ACL supporting filesystems in this regard. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-23GFS2: We only need one ACL getting functionSteven Whitehouse1-9/+5
There is no need to have two versions of this function with slightly different arguments. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21GFS2: Use ->dirty_inode()Steven Whitehouse1-2/+3
The aim of this patch is to use the newly enhanced ->dirty_inode() super block operation to deal with atime updates, rather than piggy backing that code into ->write_inode() as is currently done. The net result is a simplification of the code in various places and a reduction of the number of gfs2_dinode_out() calls since this is now implied by ->dirty_inode(). Some of the mark_inode_dirty() calls have been moved under glocks in order to take advantage of then being able to avoid locking in ->dirty_inode() when we already have suitable locks. One consequence is that generic_write_end() now correctly deals with file size updates, so that we do not need a separate check for that afterwards. This also, indirectly, means that fdatasync should work correctly on GFS2 - the current code always syncs the metadata whether it needs to or not. Has survived testing with postmark (with and without atime) and also fsx. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-08-01switch posix_acl_equiv_mode() to umode_t *Al Viro1-1/+1
... so that &inode->i_mode could be passed to it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-01switch posix_acl_create() to umode_t *Al Viro1-2/+2
so we can pass &inode->i_mode to it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25fs: take the ACL checks to common codeChristoph Hellwig1-23/+2
Replace the ->check_acl method with a ->get_acl method that simply reads an ACL from disk after having a cache miss. This means we can replace the ACL checking boilerplate code with a single implementation in namei.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25kill boilerplates around posix_acl_create_masq()Al Viro1-10/+4
new helper: posix_acl_create(&acl, gfp, mode_p). Replaces acl with modified clone, on failure releases acl and replaces with NULL. Returns 0 or -ve on error. All callers of posix_acl_create_masq() switched. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25kill boilerplate around posix_acl_chmod_masq()Al Viro1-18/+12
new helper: posix_acl_chmod(&acl, gfp, mode). Replaces acl with modified clone or with NULL if that has failed; returns 0 or -ve on error. All callers of posix_acl_chmod_masq() switched to that - they'd been doing exactly the same thing. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25vfs: move ACL cache lookup into generic codeLinus Torvalds1-6/+0
This moves logic for checking the cached ACL values from low-level filesystems into generic code. The end result is a streamlined ACL check that doesn't need to load the inode->i_op->check_acl pointer at all for the common cached case. The filesystems also don't need to check for a non-blocking RCU walk case in their acl_check() functions, because that is all handled at a VFS layer. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20->permission() sanitizing: don't pass flags to ->check_acl()Al Viro1-1/+1
not used in the instances anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20->permission() sanitizing: pass MAY_NOT_BLOCK to ->check_acl()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-21GFS2: Post-VFS scale update for RCU path walkSteven Whitehouse1-2/+5
We can allow a few more cases to use RCU path walking than originally allowed. It should be possible to also enable RCU path walking when the glock is already cached. Thats a bit more complicated though, so left for a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Nick Piggin <npiggin@gmail.com>
2011-01-07fs: provide rcu-walk aware permission i_opsNick Piggin1-1/+4
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2010-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds1-0/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Fix permissions checking for setflags ioctl() GFS2: Don't "get" xattrs for ACLs when ACLs are turned off GFS2: Rework reclaiming unlinked dinodes
2010-05-21gfs: constify xattr_handlerStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21GFS2: Don't "get" xattrs for ACLs when ACLs are turned offSteven Whitehouse1-0/+4
This is to match ext3 behaviour. We should not allow getting of xattrs relating to ACLs when ACLs are turned off. Reported-by: Nate Straz <nstraz@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-16sanitize xattr handler prototypesChristoph Hellwig1-6/+10
Add a flags argument to struct xattr_handler and pass it to all xattr handler methods. This allows using the same methods for multiple handlers, e.g. for the ACL methods which perform exactly the same action for the access and default ACLs, just using a different underlying attribute. With a little more groundwork it'll also allow sharing the methods for the regular user/trusted/secure handlers in extN, ocfs2 and jffs2 like it's already done for xfs in this patch. Also change the inode argument to the handlers to a dentry to allow using the handlers mechnism for filesystems that require it later, e.g. cifs. [with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-03GFS2: Add cached ACLs supportSteven Whitehouse1-2/+25
The other patches in this series have been building towards being able to support cached ACLs like other filesystems. The only real difference with GFS2 is that we have to invalidate the cache when we drop a glock, but that is dealt with in earlier patches. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Clean up ACLsSteven Whitehouse1-81/+83
To prepare for support for caching of ACLs, this cleans up the GFS2 ACL support by pushing the xattr code back into xattr.c and changing the acl_get function into one which only returns ACLs so that we can drop the caching function into it shortly. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Use gfs2_set_mode() instead of munge_mode()Steven Whitehouse1-35/+11
These two functions do the same thing, so lets only use one of them. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Fix up system xattrsSteven Whitehouse1-55/+115
This code has been shamelessly stolen from XFS at the suggestion of Christoph Hellwig. I've not added support for cached ACLs so far... watch for that in a later patch, although this is designed in such a way that they should be easy to add. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org>
2009-08-26GFS2: Rename eattr.[ch] as xattr.[ch]Steven Whitehouse1-1/+1
Use the more conventional name for the extended attribute support code. Update all the places which care. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-08-26GFS2: Clean up of extended attribute supportSteven Whitehouse1-59/+45
This has been on my list for some time. We need to change the way in which we handle extended attributes to allow faster file creation times (by reducing the number of transactions required) and the extended attribute code is the main obstacle to this. In addition to that, the VFS provides a way to demultiplex the xattr calls which we ought to be using, rather than rolling our own. This patch changes the GFS2 code to use that VFS feature and as a result the code shrinks by a couple of hundred lines or so, and becomes easier to read. I'm planning on doing further clean up work in this area, but this patch is a good start. The cleaned up code also uses the more usual "xattr" shorthand, I plan to eliminate the use of "eattr" eventually and in the mean time it serves as a flag as to which bits of the code have been updated. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-03-31New helper - current_umask()Al Viro1-1/+1
current->fs->umask is what most of fs_struct users are doing. Put that into a helper function. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-24GFS2: Merge lock_dlm module into GFS2Steven Whitehouse1-1/+0
This is the big patch that I've been working on for some time now. There are many reasons for wanting to make this change such as: o Reducing overhead by eliminating duplicated fields between structures o Simplifcation of the code (reduces the code size by a fair bit) o The locking interface is now the DLM interface itself as proposed some time ago. o Fewer lookups of glocks when processing replies from the DLM o Fewer memory allocations/deallocations for each glock o Scope to do further optimisations in the future (but this patch is more than big enough for now!) Please note that (a) this patch relates to the lock_dlm module and not the DLM itself, that is still a separate module; and (b) that we retain the ability to build GFS2 as a standalone single node filesystem with out requiring the DLM. This patch needs a lot of testing, hence my keeping it I restarted my -git tree after the last merge window. That way, this has the maximum exposure before its merged. This is (modulo a few minor bug fixes) the same patch that I've been posting on and off the the last three months and its passed a number of different tests so far. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-01-05GFS2: Move di_eattr into "proper" inodeSteven Whitehouse1-1/+1
This moves the di_eattr field out of gfs2_inode_host and into the inode proper. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-04-10[GFS2] fix GFP_KERNEL misusesJosef Bacik1-3/+3
There are several places where GFP_KERNEL allocations happen under a glock, which will result in hangs if we're under memory pressure and go to re-enter the fs in order to flush stuff out. This patch changes the culprits to GFS_NOFS to keep this problem from happening. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-17Introduce is_owner_or_cap() to wrap CAP_FOWNER use with fsuid checkSatyam Sharma1-1/+1
Introduce is_owner_or_cap() macro in fs.h, and convert over relevant users to it. This is done because we want to avoid bugs in the future where we check for only effective fsuid of the current task against a file's owning uid, without simultaneously checking for CAP_FOWNER as well, thus violating its semantics. [ XFS uses special macros and structures, and in general looked ... untouchable, so we leave it alone -- but it has been looked over. ] The (current->fsuid != inode->i_uid) check in generic_permission() and exec_permission_lite() is left alone, because those operations are covered by CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH. Similarly operations falling under the purview of CAP_CHOWN and CAP_LEASE are also left alone. Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in> Cc: Al Viro <viro@ftp.linux.org.uk> Acked-by: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-11-30[GFS2] Remove gfs2_check_acl()Steven Whitehouse1-17/+2
As pointed out by Adrian Bunk, the gfs2_check_acl() function is no longer used. This patch removes it and renamed gfs2_check_acl_locked() to gfs2_check_acl() since we only need one variant of that function now. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Bunk <bunk@stusta.de>
2006-11-30[GFS2] Shrink gfs2_inode (4) - di_uid/di_gidSteven Whitehouse1-1/+1
Remove duplicate di_uid/di_gid fields in favour of using inode->i_uid/inode->i_gid instead. This saves 8 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (3) - di_modeSteven Whitehouse1-8/+8
This removes the duplicate di_mode field in favour of using the inode->i_mode field. This saves 4 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Change argument of gfs2_dinode_outSteven Whitehouse1-1/+1
Everywhere this was called, a struct gfs2_inode was available, but despite that, it was always called with a struct gfs2_dinode as an argument. By making this change it paves the way to start eliminating fields duplicated between the kernel's struct inode and the struct gfs2_dinode. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-25[GFS2/DLM] Fix trailing whitespaceSteven Whitehouse1-1/+1
As per Andrew Morton's request, removed trailing whitespace. Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19[GFS2] Export lm_interface to kernel headersFabio Massimo Di Nitto1-1/+1
lm_interface.h has a few out of the tree clients such as GFS1 and userland tools. Right now, these clients keeps a copy of the file in their build tree that can go out of sync. Move lm_interface.h to include/linux, export it to userland and clean up fs/gfs2 to use the new location. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04[GFS2] Align all labels against LH sideSteven Whitehouse1-9/+5
This makes everything consistent. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01[GFS2] Update copyright, tidy up incore.hSteven Whitehouse1-1/+1
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this updates the copyright message to say "version" in full rather than "v.2". Also incore.h has been updated to remove forward structure declarations which are not required. The gfs2_quota_lvb structure has now had endianess annotations added to it. Also quota.c has been updated so that we now store the lvb data locally in endian independant format to avoid needing a structure in host endianess too. As a result the endianess conversions are done as required at various points and thus the conversion routines in lvb.[ch] are no longer required. I've moved the one remaining constant in lvb.h thats used into lm.h and removed the unused lvb.[ch]. I have not changed the HIF_ constants. That is left to a later patch which I hope will unify the gh_flags and gh_iflags fields of the struct gfs2_holder. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-22[GFS2] Remove gfs2_repermissionSteven Whitehouse1-3/+1
gfs2_repermission is just a wrapper for permission, so remove it and call permission directly where required. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-14[GFS2] Fix unlinked file handlingSteven Whitehouse1-5/+5
This patch fixes the way we have been dealing with unlinked, but still open files. It removes all limits (other than memory for inodes, as per every other filesystem) on numbers of these which we can support on GFS2. It also means that (like other fs) its the responsibility of the last process to close the file to deallocate the storage, rather than the person who did the unlinking. Note that with GFS2, those two events might take place on different nodes. Also there are a number of other changes: o We use the Linux inode subsystem as it was intended to be used, wrt allocating GFS2 inodes o The Linux inode cache is now the point which we use for local enforcement of only holding one copy of the inode in core at once (previous to this we used the glock layer). o We no longer use the unlinked "special" file. We just ignore it completely. This makes unlinking more efficient. o We now use the 4th block allocation state. The previously unused state is used to track unlinked but still open inodes. o gfs2_inoded is no longer needed o Several fields are now no longer needed (and removed) from the in core struct gfs2_inode o Several fields are no longer needed (and removed) from the in core superblock There are a number of future possible optimisations and clean ups which have been made possible by this patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 10:16:49 +0000