summaryrefslogtreecommitdiff
path: root/fs/ext4/super.c
AgeCommit message (Collapse)AuthorFilesLines
2010-12-14ext4: Turn off multiple page-io submission by defaultTheodore Ts'o1-2/+12
Jon Nelson has found a test case which causes postgresql to fail with the error: psql:t.sql:4: ERROR: invalid page header in block 38269 of relation base/16384/16581 Under memory pressure, it looks like part of a file can end up getting replaced by zero's. Until we can figure out the cause, we'll roll back the change and use block_write_full_page() instead of ext4_bio_write_page(). The new, more efficient writing function can be used via the mount option mblk_io_submit, so we can test and fix the new page I/O code. To reproduce the problem, install postgres 8.4 or 9.0, and pin enough memory such that the system just at the end of triggering writeback before running the following sql script: begin; create temporary table foo as select x as a, ARRAY[x] as b FROM generate_series(1, 10000000 ) AS x; create index foo_a_idx on foo (a); create index foo_b_idx on foo USING GIN (b); rollback; If the temporary table is created on a hard drive partition which is encrypted using dm_crypt, then under memory pressure, approximately 30-40% of the time, pgsql will issue the above failure. This patch should fix this problem, and the problem will come back if the file system is mounted with the mblk_io_submit mount option. Reported-by: Jon Nelson <jnelson@jamponi.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-19fs: Do not dispatch FITRIM through separate super_operationLukas Czerner1-1/+0
There was concern that FITRIM ioctl is not common enough to be included in core vfs ioctl, as Christoph Hellwig pointed out there's no real point in dispatching this out to a separate vector instead of just through ->ioctl. So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs from super_operation structure. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-19ext4: ext4_fill_super shouldn't return 0 on corruptionDarrick J. Wong1-2/+3
At the start of ext4_fill_super, ret is set to -EINVAL, and any failure path out of that function returns ret. However, the generic_check_addressable clause sets ret = 0 (if it passes), which means that a subsequent failure (e.g. a group checksum error) returns 0 even though the mount should fail. This causes vfs_kern_mount in turn to think that the mount succeeded, leading to an oops. A simple fix is to avoid using ret for the generic_check_addressable check, which was last changed in commit 30ca22c70e3ef0a96ff84de69cd7e8561b416cb2. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-17ext4: missing unlock in ext4_clear_request_list()Dan Carpenter1-3/+0
If the the li_request_list was empty then it returned with the lock held. Instead of adding a "goto unlock" I just removed that special case and let it go past the empty list_for_each_safe(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-08ext4: Add new ext4 inode tracepointsTheodore Ts'o1-0/+10
Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and ext4_begin_ordered_truncate() Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-08ext4: do not try to grab the s_umount semaphore in ext4_quota_offDmitry Monakhov1-5/+3
It's not needed to sync the filesystem, and it fixes a lock_dep complaint. Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2010-11-08ext4: handle writeback of inodes which are being freedTheodore Ts'o1-0/+2
The following BUG can occur when an inode which is getting freed when it still has dirty pages outstanding, and it gets deleted (in this because it was the target of a rename). In ordered mode, we need to make sure the data pages are written just in case we crash before the rename (or unlink) is committed. If the inode is being freed then when we try to igrab the inode, we end up tripping the BUG_ON at fs/ext4/page-io.c:146. To solve this problem, we need to keep track of the number of io callbacks which are pending, and avoid destroying the inode until they have all been completed. That way we don't have to bump the inode count to keep the inode from being destroyed; an approach which doesn't work because the count could have already been dropped down to zero before the inode writeback has started (at which point we're not allowed to bump the count back up to 1, since it's already started getting freed). Thanks to Dave Chinner for suggesting this approach, which is also used by XFS. kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146! Call Trace: [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307 [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2 [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5 [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d [<ffffffff81087910>] do_writepages+0x1c/0x25 [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10 [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2 [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c [<ffffffff810c14a3>] evict+0x22/0x92 [<ffffffff810c1a3d>] iput+0x212/0x249 [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9 [<ffffffff810bdf6b>] d_kill+0x3d/0x5d [<ffffffff810be613>] dput+0x13a/0x147 [<ffffffff810b990d>] sys_renameat+0x1b5/0x258 [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38 [<ffffffff810b99c6>] sys_rename+0x16/0x18 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Nick Bowler <nbowler@elliptictech.com>
2010-11-03ext4: initialize the percpu counters before replaying the journalTheodore Ts'o1-26/+39
We now initialize the percpu counters before replaying the journal, but after the journal, we recalculate the global counters, to deal with the possibility of the per-blockgroup counts getting updated by the journal replay. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-02ext4: "ret" may be used uninitialized in ext4_lazyinit_thread()Theodore Ts'o1-8/+6
Newer GCC's reported the following build warning: fs/ext4/super.c: In function 'ext4_lazyinit_thread': fs/ext4/super.c:2702: warning: 'ret' may be used uninitialized in this function Fix it by removing the need for the ret variable in the first place. Signed-off-by: "Lukas Czerner" <lczerner@redhat.com> Reported-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-02ext4: fix lazyinit hang after removing requestLukas Czerner1-1/+2
When the request has been removed from the list and no other request has been issued, we will end up with next wakeup scheduled to MAX_JIFFY_OFFSET which is bad. So check for that. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-29new helper: mount_bdev()Al Viro1-8/+8
... and switch of the obvious get_sb_bdev() users to ->mount() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-27Merge branch 'next' into upstream-mergeTheodore Ts'o1-21/+510
Conflicts: fs/ext4/inode.c fs/ext4/mballoc.c include/trace/events/ext4.h
2010-10-27ext4: fix unbalanced mutex unlock in error path of ext4_li_request_newNicolas Kaiser1-14/+8
Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: make various ext4 functions be staticTheodore Ts'o1-1/+1
These functions have no need to be exported beyond file context. No functions needed to be moved for this commit; just some function declarations changed to be static and removed from header files. (A similar patch was submitted by Eric Sandeen, but I wanted to handle code movement in separate patches to make sure code changes didn't accidentally get dropped.) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: rename {exit,init}_ext4_*() to ext4_{exit,init}_*()Theodore Ts'o1-16/+16
This is a cleanup to avoid namespace leaks out of fs/ext4 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: fix kernel oops if the journal superblock has a non-zero j_errnoTheodore Ts'o1-2/+5
Commit 84061e0 fixed an accounting bug only to introduce the possibility of a kernel OOPS if the journal has a non-zero j_errno field indicating that the file system had detected a fs inconsistency. After the journal replay, if the journal superblock indicates that the file system has an error, this indication is transfered to the file system and then ext4_commit_super() is called to write this to the disk. But since the percpu counters are now initialized after the journal replay, the call to ext4_commit_super() will cause a kernel oops since it needs to use the percpu counters the ext4 superblock structure. The fix is to skip setting the ext4 free block and free inode fields if the percpu counter has not been set. Thanks to Ken Sumrall for reporting and analyzing the root causes of this bug. Addresses-Google-Bug: #3054080 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: add batched_discard into ext4 feature listLukas Czerner1-0/+2
Should be applied on the top of "lazy inode table initialization" and "batched discard support" patch-sets. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: Add batched discard support for ext4Lukas Czerner1-0/+1
Walk through allocation groups and trim all free extents. It can be invoked through FITRIM ioctl on the file system. The main idea is to provide a way to trim the whole file system if needed, since some SSD's may suffer from performance loss after the whole device was filled (it does not mean that fs is full!). It search for free extents in allocation groups specified by Byte range start -> start+len. When the free extent is within this range, blocks are marked as used and then trimmed. Afterwards these blocks are marked as free in per-group bitmap. Since fstrim is a long operation it is good to have an ability to interrupt it by a signal. This was added by Dmitry Monakhov. Thanks Dimitry. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: use bio layer instead of buffer layer in mpage_da_submit_ioTheodore Ts'o1-1/+7
Call the block I/O layer directly instad of going through the buffer layer. This should give us much better performance and scalability, as well as lowering our CPU utilization when doing buffered writeback. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: don't update sb journal_devnum when RO devMaciej Żenczykowski1-1/+1
An ext4 filesystem on a read-only device, with an external journal which is at a different device number then recorded in the superblock will fail to honor the read-only setting of the device and trigger a superblock update (write). For example: - ext4 on a software raid which is in read-only mode - external journal on a read-write device which has changed device num - attempt to mount with -o journal_dev=<new_number> - hits BUG_ON(mddev->ro = 1) in md.c Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: add interface to advertise ext4 features in sysfsLukas Czerner1-2/+50
User-space should have the opportunity to check what features doest ext4 support in each particular copy. This adds easy interface by creating new "features" directory in sys/fs/ext4/. In that directory files advertising feature names can be created. Add lazy_itable_init to the feature list. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: add support for lazy inode table initializationLukas Czerner1-3/+437
When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: fix NULL pointer dereference in print_daily_error_info()Sergey Senozhatsky1-0/+1
Fix NULL pointer dereference in print_daily_error_info, when called on unmounted fs (EXT4_SB(sb) returns NULL), by removing error reporting timer in ext4_put_super. Google-Bug-Id: 3017663 Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-22Merge branch 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-11/+0
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits) BKL: remove BKL from freevxfs BKL: remove BKL from qnx4 autofs4: Only declare function when CONFIG_COMPAT is defined autofs: Only declare function when CONFIG_COMPAT is defined ncpfs: Lock socket in ncpfs while setting its callbacks fs/locks.c: prepare for BKL removal BKL: Remove BKL from ncpfs BKL: Remove BKL from OCFS2 BKL: Remove BKL from squashfs BKL: Remove BKL from jffs2 BKL: Remove BKL from ecryptfs BKL: Remove BKL from afs BKL: Remove BKL from USB gadgetfs BKL: Remove BKL from autofs4 BKL: Remove BKL from isofs BKL: Remove BKL from fat BKL: Remove BKL from ext2 filesystem BKL: Remove BKL from do_new_mount() BKL: Remove BKL from cgroup BKL: Remove BKL from NTFS ...
2010-10-04BKL: Remove BKL from ext4 filesystemJan Blunck1-15/+0
The BKL is still used in ext4_put_super(), ext4_fill_super() and ext4_remount(). All three calles are protected against concurrent calls by the s_umount rw semaphore of struct super_block. Therefore the BKL is protecting nothing in this case. Signed-off-by: Jan Blunck <jblunck@infradead.org> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-04BKL: Explicitly add BKL around get_sb/fill_superJan Blunck1-2/+6
This patch is a preparation necessary to remove the BKL from do_new_mount(). It explicitly adds calls to lock_kernel()/unlock_kernel() around get_sb/fill_super operations for filesystems that still uses the BKL. I've read through all the code formerly covered by the BKL inside do_kern_mount() and have satisfied myself that it doesn't need the BKL any more. do_kern_mount() is already called without the BKL when mounting the rootfs and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called from various places without BKL: simple_pin_fs(), nfs_do_clone_mount() through nfs_follow_mountpoint(), afs_mntpt_do_automount() through afs_mntpt_follow_link(). Both later functions are actually the filesystems follow_link inode operation. vfs_kern_mount() is calling the specified get_sb function and lets the filesystem do its job by calling the given fill_super function. Therefore I think it is safe to push down the BKL from the VFS to the low-level filesystems get_sb/fill_super operation. [arnd: do not add the BKL to those file systems that already don't use it elsewhere] Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-10ext3/ext4: Factor out disk addressability checkPatrick J. LoPresti1-5/+3
As part of adding support for OCFS2 to mount huge volumes, we need to check that the sector_t and page cache of the system are capable of addressing the entire volume. An identical check already appears in ext3 and ext4. This patch moves the addressability check into its own function in fs/libfs.c and modifies ext3 and ext4 to invoke it. [Edited to -EINVAL instead of BUG_ON() for bad blocksize_bits -- Joel] Signed-off-by: Patrick LoPresti <lopresti@gmail.com> Cc: linux-ext4@vger.kernel.org Acked-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-09convert ext4 to ->evict_inode()Al Viro1-5/+5
pretty much brute-force... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-07Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds1-98/+236
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits) ext4: Adding error check after calling ext4_mb_regular_allocator() ext4: Fix dirtying of journalled buffers in data=journal mode ext4: re-inline ext4_rec_len_(to|from)_disk functions jbd2: Remove t_handle_lock from start_this_handle() jbd2: Change j_state_lock to be a rwlock_t jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop ext4: Add mount options in superblock ext4: force block allocation on quota_off ext4: fix freeze deadlock under IO ext4: drop inode from orphan list if ext4_delete_inode() fails ext4: check to make make sure bd_dev is set before dereferencing it jbd2: Make barrier messages less scary ext4: don't print scary messages for allocation failures post-abort ext4: fix EFBIG edge case when writing to large non-extent file ext4: fix ext4_get_blocks references ext4: Always journal quota file modifications ext4: Fix potential memory leak in ext4_fill_super ext4: Don't error out the fs if the user tries to make a file too big ext4: allocate stripe-multiple IOs on stripe boundaries ext4: move aio completion after unwritten extent conversion ... Fix up conflicts in fs/ext4/inode.c as per Ted. Fix up xfs conflicts as per earlier xfs merge.
2010-08-03jbd2: Change j_state_lock to be a rwlock_tTheodore Ts'o1-2/+2
Lockstat reports have shown that j_state_lock is a major source of lock contention, especially on systems with more than 4 CPU cores. So change it to be a read/write spinlock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-01ext4: Add mount options in superblockTheodore Ts'o1-6/+23
Allow mount options to be stored in the superblock. Also add default mount option bits for nobarrier, block_validity, discard, and nodelalloc. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-01ext4: force block allocation on quota_offDmitry Monakhov1-1/+14
Perform full sync procedure so that any delayed allocation blocks are allocated so quota will be consistent. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-01ext4: fix freeze deadlock under IOEric Sandeen1-2/+2
Commit 6b0310fbf087ad6 caused a regression resulting in deadlocks when freezing a filesystem which had active IO; the vfs_check_frozen level (SB_FREEZE_WRITE) did not let the freeze-related IO syncing through. Duh. Changing the test to FREEZE_TRANS should let the normal freeze syncing get through the fs, but still block any transactions from starting once the fs is completely frozen. I tested this by running fsstress in the background while periodically snapshotting the fs and running fsck on the result. I ran into occasional deadlocks, but different ones. I think this is a fine fix for the problem at hand, and the other deadlocky things will need more investigation. Reported-by: Phillip Susi <psusi@cfl.rr.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: check to make make sure bd_dev is set before dereferencing itTheodore Ts'o1-4/+13
There are some drivers which may not set bdev->bd_dev. So make sure it is non-NULL before dereferencing it. Google-Bug-Id: 1773557 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Always journal quota file modificationsJan Kara1-14/+5
When journaled quota options are not specified, we do writes to quota files just in data=ordered mode. This actually causes warnings from JBD2 about dirty journaled buffer because ext4_getblk unconditionally treats a block allocated by it as metadata. Since quota actually is filesystem metadata, the easiest way to get rid of the warning is to always treat quota writes as metadata... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Fix potential memory leak in ext4_fill_superCyrill Gorcunov1-3/+5
Under heavy memory pressure we may hit out of memory situation and as result kstrdup'ed options will not be freed. Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Once a day, printk file system error information to dmesgTheodore Ts'o1-0/+59
This allows us to grab any file system error messages by scraping /var/log/messages. This will make it easy for us to do error analysis across the very large number of machines as we deploy ext4 across the fleet. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Save error information to the superblock for analysisTheodore Ts'o1-19/+61
Save number of file system errors, and the time function name, line number, block number, and inode number of the first and most recent errors reported on the file system in the superblock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Pass line numbers to ext4_error() and friendsTheodore Ts'o1-19/+28
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: Pass line number to ext4_journal_abort_handle()Theodore Ts'o1-4/+5
This allows the error messages to include the line number Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: Enhance ext4_grp_locked_error() to take block and function numbersTheodore Ts'o1-3/+10
Also use a macro definition so that __func__ and __LINE__ is implicit. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: clean up ext4_abort() so __func__ is now implicitTheodore Ts'o1-6/+5
Use a macro definition for ext4_abort() to clean up the .c files a wee bit. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-16Merge branch 'master' into for-nextJiri Kosina1-51/+66
2010-06-16fix typos concerning "initiali[zs]e"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-14ext4: remove vestiges of nobh supportChristoph Hellwig1-16/+5
The nobh option was only supported for writeback mode, but given that all write paths actually create buffer heads it effectively was a no-op already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-30Merge branch 'for_linus' of ↵Linus Torvalds1-15/+22
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Convert quota statistics to generic percpu_counter ext3 uses rb_node = NULL; to zero rb_root. quota: Fixup dquot_transfer reiserfs: Fix resuming of quotas on remount read-write pohmelfs: Remove dead quota code ufs: Remove dead quota code udf: Remove dead quota code quota: rename default quotactl methods to dquot_ quota: explicitly set ->dq_op and ->s_qcop quota: drop remount argument to ->quota_on and ->quota_off quota: move unmount handling into the filesystem quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers quota: move remount handling into the filesystem ocfs2: Fix use after free on remount read-only Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
2010-05-24quota: rename default quotactl methods to dquot_Christoph Hellwig1-10/+10
Follow the dquot_* style used elsewhere in dquot.c. [Jan Kara: Fixed up missing conversion of ext2] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: drop remount argument to ->quota_on and ->quota_offChristoph Hellwig1-6/+3
Remount handling has fully moved into the filesystem, so all this is superflous now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: move unmount handling into the filesystemChristoph Hellwig1-0/+2
Currently the VFS calls into the quotactl interface for unmounting filesystems. This means filesystems with their own quota handling can't easily distinguish between user-space originating quotaoff and an unount. Instead move the responsibily of the unmount handling into the filesystem to be consistent with all other dquot handling. Note that we do call dquot_disable a lot later now, e.g. after a sync_filesystem. But this is fine as the quota code does all its writes via blockdev's mapping and that is synced even later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 09:54:06 +0000