summaryrefslogtreecommitdiff
path: root/fs/btrfs/ordered-data.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-14btrfs: add BTRFS_IOC_ENCODED_WRITEOmar Sandoval1-3/+9
The implementation resembles direct I/O: we have to flush any ordered extents, invalidate the page cache, and do the io tree/delalloc/extent map/ordered extent dance. From there, we can reuse the compression code with a minor modification to distinguish the write from writeback. This also creates inline extents when possible. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-14btrfs: add ram_bytes and offset to btrfs_ordered_extentOmar Sandoval1-85/+35
Currently, we only create ordered extents when ram_bytes == num_bytes and offset == 0. However, BTRFS_IOC_ENCODED_WRITE writes may create extents which only refer to a subset of the full unencoded extent, so we need to plumb these fields through the ordered extent infrastructure and pass them down to insert_reserved_file_extent(). Since we're changing the btrfs_add_ordered_extent* signature, let's get rid of the trivial wrappers and add a kernel-doc. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-07btrfs: zoned: fix double counting of split ordered extentNaohiro Aota1-0/+8
btrfs_add_ordered_extent_*() add num_bytes to fs_info->ordered_bytes. Then, splitting an ordered extent will call btrfs_add_ordered_extent_*() again for split extents, leading to double counting of the region of a split extent. These leaked bytes are finally reported at unmount time as follow: BTRFS info (device dm-1): at unmount dio bytes count 364544 Fix the double counting by subtracting split extent's size from fs_info->ordered_bytes. Fixes: d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent") CC: stable@vger.kernel.org # 5.12+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23btrfs: remove uptodate parameter from btrfs_dec_test_first_ordered_pendingDavid Sterba1-4/+1
In commit e65f152e4348 ("btrfs: refactor how we finish ordered extent io for endio functions") there was last caller not using 1 for the uptodate parameter. Now there's only one, passing 1, so we can remove it and simplify the code. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-22btrfs: store a block_device in struct btrfs_ordered_extentChristoph Hellwig1-2/+0
Store the block device instead of the gendisk in the btrfs_ordered_extent structure instead of acquiring a reference to it later. Note: this is from series removing bdgrab/bdput, btrfs is one of the last users. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: make page Ordered bit to be subpage compatibleQu Wenruo1-2/+3
This involves the following modification: - Ordered extent creation This is done in process_one_page(), now PAGE_SET_ORDERED will call subpage helper to do the work. - endio functions This is done in btrfs_mark_ordered_io_finished(). - btrfs_invalidatepage() - btrfs_cleanup_ordered_extents() Use the subpage page helper, and add an extra branch to exit if the locked page have covered the full range. Now the usage of page Ordered flag for ordered extent accounting is fully subpage compatible. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: rename PagePrivate2 to PageOrdered inside btrfsQu Wenruo1-4/+4
Inside btrfs we use Private2 page status to indicate we have an ordered extent with pending IO for the sector. But the page status name, Private2, tells us nothing about the bit itself, so this patch will rename it to Ordered. And with extra comment about the bit added, so reader who is still uncertain about the page Ordered status, will find the comment pretty easily. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: introduce btrfs_lookup_first_ordered_range()Qu Wenruo1-0/+75
Although we already have btrfs_lookup_first_ordered_extent() and btrfs_lookup_ordered_extent(), they all have their own limitations: - btrfs_lookup_ordered_extent() can't do extra range check It's only designed to lookup any ordered extent before certain bytenr. - btrfs_lookup_first_ordered_extent() may not return the first ordered extent in the range It doesn't ensure the first ordered extent is returned. The existing callers are only interested in exhausting all ordered extents in a range, the order is not important. For incoming btrfs_invalidatepage() refactoring, we need a way to properly iterate all ordered extents in their bytenr order of a range. So this patch will introduce a new function, btrfs_lookup_first_ordered_range(), to do ordered extent with bytenr order awareness and extra range check. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: refactor how we finish ordered extent io for endio functionsQu Wenruo1-58/+119
Btrfs has two endio functions to mark certain io range finished for ordered extents: - __endio_write_update_ordered() This is for direct IO - btrfs_writepage_endio_finish_ordered() This for buffered IO. However they go different routines to handle ordered extent io: - Whether to iterate through all ordered extents __endio_write_update_ordered() will but btrfs_writepage_endio_finish_ordered() will not. In fact, iterating through all ordered extents will benefit later subpage support, while for current PAGE_SIZE == sectorsize requirement this behavior makes no difference. - Whether to update page Private2 flag __endio_write_update_ordered() will not update page Private2 flag as for iomap direct IO, the page can not be even mapped. While btrfs_writepage_endio_finish_ordered() will clear Private2 to prevent double accounting against btrfs_invalidatepage(). Those differences are pretty subtle, and the ordered extent iterations code in callers makes code much harder to read. So this patch will introduce a new function, btrfs_mark_ordered_io_finished(), to do the heavy lifting: - Iterate through all ordered extents in the range - Do the ordered extent accounting - Queue the work for finished ordered extent This function has two new feature: - Proper underflow detection and recovery The old underflow detection will only detect the problem, then continue. No proper info like root/inode/ordered extent info, nor noisy enough to be caught by fstests. Furthermore when underflow happens, the ordered extent will never finish. New error detection will reset the bytes_left to 0, do proper kernel warning, and output extra info including root, ino, ordered extent range, the underflow value. - Prevent double accounting based on Private2 flag Now if we find a range without Private2 flag, we will skip to next range. As that means someone else has already finished the accounting of ordered extent. This makes no difference for current code, but will be a critical part for incoming subpage support, as we can call btrfs_mark_ordered_io_finished() for multiple sectors if they are beyond inode size. Thus such double accounting prevention is a key feature for subpage. Now both endio functions only need to call that new function. And since the only caller of btrfs_dec_test_first_ordered_pending() is removed, also remove btrfs_dec_test_first_ordered_pending() completely. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-28btrfs: zoned: fix silent data loss after failure splitting ordered extentFilipe Manana1-1/+1
On a zoned filesystem, sometimes we need to split an ordered extent into 3 different ordered extents. The original ordered extent is shortened, at the front and at the rear, and we create two other new ordered extents to represent the trimmed parts of the original ordered extent. After adjusting the original ordered extent, we create an ordered extent to represent the pre-range, and that may fail with ENOMEM for example. After that we always try to create the ordered extent for the post-range, and if that happens to succeed we end up returning success to the caller as we overwrite the 'ret' variable which contained the previous error. This means we end up with a file range for which there is no ordered extent, which results in the range never getting a new file extent item pointing to the new data location. And since the split operation did not return an error, writeback does not fail and the inode's mapping is not flagged with an error, resulting in a subsequent fsync not reporting an error either. It's possibly very unlikely to have the creation of the post-range ordered extent succeed after the creation of the pre-range ordered extent failed, but it's not impossible. So fix this by making sure we only create the post-range ordered extent if there was no error creating the ordered extent for the pre-range. Fixes: d22002fd37bd97 ("btrfs: zoned: split ordered extent when bio is sent") CC: stable@vger.kernel.org # 5.12+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: replace offset_in_entry with in_rangeNikolay Borisov1-15/+4
No point in duplicating the functionality just use the generic helper that has the same semantics. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09btrfs: zoned: use ZONE_APPEND write for zoned modeNaohiro Aota1-0/+3
Enable zone append writing for zoned mode. When using zone append, a bio is issued to the start of a target zone and the device decides to place it inside the zone. Upon completion the device reports the actual written position back to the host. Three parts are necessary to enable zone append mode. First, modify the bio to use REQ_OP_ZONE_APPEND in btrfs_submit_bio_hook() and adjust the bi_sector to point the beginning of the zone. Second, record the returned physical address (and disk/partno) to the ordered extent in end_bio_extent_writepage() after the bio has been completed. We cannot resolve the physical address to the logical address because we can neither take locks nor allocate a buffer in this end_bio context. So, we need to record the physical address to resolve it later in btrfs_finish_ordered_io(). And finally, rewrite the logical addresses of the extent mapping and checksum data according to the physical address using btrfs_rmap_block. If the returned address matches the originally allocated address, we can skip this rewriting process. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09btrfs: save irq flags when looking up an ordered extentJohannes Thumshirn1-2/+3
A following patch will add another caller of btrfs_lookup_ordered_extent(), but from a bio's endio context. btrfs_lookup_ordered_extent() uses spin_lock_irq() which unconditionally disables interrupts. Change this to spin_lock_irqsave() so interrupts aren't disabled and re-enabled unconditionally. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09btrfs: zoned: split ordered extent when bio is sentNaohiro Aota1-0/+78
For a zone append write, the device decides the location the data is being written to. Therefore we cannot ensure that two bios are written consecutively on the device. In order to ensure that an ordered extent maps to a contiguous region on disk, we need to maintain a "one bio == one ordered extent" rule. Implement splitting of an ordered extent and extent map on bio submission to adhere to the rule. extract_ordered_extent() hooks into btrfs_submit_data_bio() and splits the corresponding ordered extent so that the ordered extent's region fits into one bio and the corresponding device limits. Several sanity checks need to be done in extract_ordered_extent() e.g. - We cannot split once end_bio'd ordered extent because we cannot divide ordered->bytes_left for the split ones - We do not expect a compressed ordered extent - We should not have checksum list because we omit the list splitting. Since the function is called before btrfs_wq_submit_bio() or btrfs_csum_one_bio(), this should be always ensured. We also need to split an extent map by creating a new one. If not, unpin_extent_cache() complains about the difference between the start of the extent map and the file's logical offset. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-08btrfs: track ordered bytes instead of just dio ordered bytesJosef Bacik1-7/+6
We track dio_bytes because the shrink delalloc code needs to know if we have more DIO in flight than we have normal buffered IO. The reason for this is because we can't "flush" DIO, we have to just wait on the ordered extents to finish. However this is true of all ordered extents. If we have more ordered space outstanding than dirty pages we should be waiting on ordered extents. We already are ok on this front technically, because we always do a FLUSH_DELALLOC_WAIT loop, but I want to use the ordered counter in the preemptive flushing code as well, so change this to count all ordered bytes instead of just DIO ordered bytes. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-08btrfs: rework the order of btrfs_ordered_extent::flagsQu Wenruo1-5/+16
[BUG] There is a long existing bug in the last parameter of btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads") back to 2008. In that ancient commit btrfs_add_ordered_extent() expects the @type parameter to be one of the following: - BTRFS_ORDERED_REGULAR - BTRFS_ORDERED_NOCOW - BTRFS_ORDERED_PREALLOC - BTRFS_ORDERED_COMPRESSED But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE. Ironically extra check in __btrfs_add_ordered_extent() won't set the bit if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any obvious bug. But this still leads to regular COW ordered extent having no bit to indicate its type in various trace events, rendering REGULAR bit useless. [FIX] Change the following aspects to avoid such problem: - Reorder btrfs_ordered_extent::flags Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR. - Add extra ASSERT() for btrfs_add_ordered_extent_*() - Remove @type parameter for btrfs_add_ordered_extent_compress() As the only valid @type here is BTRFS_ORDERED_COMPRESSED. - Remove the unnecessary special check for IO_DONE/COMPLETE in __btrfs_add_ordered_extent() This is just to make the code work, with extra ASSERT(), there are limited values can be passed in. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-08btrfs: refactor btrfs_dec_test_* functions for ordered extentsQu Wenruo1-46/+58
The refactoring involves the following modifications: - Return bool instead of int - Parameter update for @cached of btrfs_dec_test_first_ordered_pending() For btrfs_dec_test_first_ordered_pending(), @cached is only used to return the finished ordered extent. Rename it to @finished_ret. - Comment updates * Change one stale comment Which still refers to btrfs_dec_test_ordered_pending(), but the context is calling btrfs_dec_test_first_ordered_pending(). * Follow the common comment style for both functions Add more detailed descriptions for parameters and the return value * Move the reason why test_and_set_bit() is used into the call sites - Change how the return value is calculated The most anti-human part of the return value is: if (...) ret = 1; ... return ret == 0; This means, when we set ret to 1, the function returns 0. Change the local variable name to @finished, and directly return the value of it. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-09btrfs: remove btrfs_find_ordered_sum call from btrfs_lookup_bio_sumsQu Wenruo1-44/+0
The function btrfs_lookup_bio_sums() is only called for read bios. While btrfs_find_ordered_sum() is to search ordered extent sums, which is only for write path. This means to read a page we either: - Submit read bio if it's not uptodate This means we only need to search csum tree for checksums. - The page is already uptodate It can be marked uptodate for previous read, or being marked dirty. As we always mark page uptodate for dirty page. In that case, we don't need to submit read bio at all, thus no need to search any checksums. Remove the btrfs_find_ordered_sum() call in btrfs_lookup_bio_sums(). And since btrfs_lookup_bio_sums() is the only caller for btrfs_find_ordered_sum(), also remove the implementation. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08btrfs: switch cached fs_info::csum_size from u16 to u32David Sterba1-1/+1
The fs_info value is 32bit, switch also the local u16 variables. This leads to a better assembly code generated due to movzwl. This simple change will shave some bytes on x86_64 and release config: text data bss dec hex filename 1090000 17980 14912 1122892 11224c pre/btrfs.ko 1089794 17980 14912 1122686 11217e post/btrfs.ko DELTA: -206 Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08btrfs: use cached value of fs_info::csum_size everywhereDavid Sterba1-1/+1
btrfs_get_16 shows up in the system performance profiles (helper to read 16bit values from on-disk structures). This is partially because of the checksum size that's frequently read along with data reads/writes, other u16 uses are from item size or directory entries. Replace all calls to btrfs_super_csum_size by the cached value from fs_info. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08btrfs: replace s_blocksize_bits with fs_info::sectorsize_bitsDavid Sterba1-3/+3
The value of super_block::s_blocksize_bits is the same as fs_info::sectorsize_bits, but we don't need to do the extra dereferences in many functions and storing the bits as u32 (in fs_info) generates shorter assembly. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08btrfs: use precalculated sectorsize_bits from fs_infoDavid Sterba1-2/+1
We do a lot of calculations where we divide or multiply by sectorsize. We also know and make sure that sectorsize is a power of two, so this means all divisions can be turned to shifts and avoid eg. expensive u64/u32 divisions. The type is u32 as it's more register friendly on x86_64 compared to u8 and the resulting assembly is smaller (movzbl vs movl). There's also superblock s_blocksize_bits but it's usually one more pointer dereference farther than fs_info. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: remove inode argument from btrfs_start_ordered_extentNikolay Borisov1-8/+7
The passed in ordered_extent struct is always well-formed and contains the inode making the explicit argument redundant. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: switch btrfs_remove_ordered_extent to btrfs_inodeNikolay Borisov1-4/+3
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: make btrfs_find_ordered_sum take btrfs_inodeNikolay Borisov1-10/+9
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: convert btrfs_inode_sectorsize to take btrfs_inodeNikolay Borisov1-1/+1
It's counterintuitive to have a function named btrfs_inode_xxx which takes a generic inode. Also move the function to btrfs_inode.h so that it has access to the definition of struct btrfs_inode. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: make btrfs_dec_test_ordered_pending take btrfs_inodeNikolay Borisov1-4/+3
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: make ordered extent tracepoint take btrfs_inodeNikolay Borisov1-4/+4
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: make btrfs_lookup_first_ordered_extent take btrfs_inodeNikolay Borisov1-3/+3
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: make fast fsyncs wait only for writebackFilipe Manana1-0/+59
Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: make btrfs_add_ordered_extent_dio take btrfs_inodeNikolay Borisov1-2/+2
Simply forwards its argument so let's get rid of one extra BTRFS_I by taking btrfs_inode directly. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: make btrfs_dec_test_first_ordered_pending take btrfs_inodeNikolay Borisov1-4/+3
It doesn't really need vfs_inode but btrfs_inode. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: make btrfs_qgroup_release_data take btrfs_inodeNikolay Borisov1-2/+1
It just forwards its argument to __btrfs_qgroup_release_data. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: make btrfs_add_ordered_extent_compress take btrfs_inodeNikolay Borisov1-2/+2
It simpy forwards its inode argument to __btrfs_add_ordered_extent which already takes btrfs_inode. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: make btrfs_add_ordered_extent take btrfs_inodeNikolay Borisov1-2/+2
Preparation to converting its callers to taking btrfs_inode. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: make btrfs_qgroup_free_data take btrfs_inodeNikolay Borisov1-2/+1
It passes btrfs_inode to its callee so change the interface. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: make btrfs_lookup_ordered_extent take btrfs_inodeNikolay Borisov1-3/+3
It doesn't use the generic vfs inode for anything use btrfs_inode directly. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: make __btrfs_add_ordered_extent take struct btrfs_inodeNikolay Borisov1-15/+15
This is internal btrfs function what really needs the vfs_inode only for igrab and a tracepoint. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: remove no longer used trans_list member of struct btrfs_ordered_extentFilipe Manana1-2/+0
The 'trans_list' member of an ordered extent was used to keep track of the ordered extents for which a transaction commit had to wait. These were ordered extents that were started and logged by an fsync. However we don't do that anymore and before we stopped doing it we changed the approach to wait for the ordered extents in commit 161c3549b45aee ("Btrfs: change how we wait for pending ordered extents"), which stopped using that list and therefore the 'trans_list' member is not used anymore since that commit. So just remove it since it's doing nothing and making each ordered extent structure waste memory (2 pointers). Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: remove no longer used log_list member of struct btrfs_ordered_extentFilipe Manana1-2/+0
The 'log_list' member of an ordered extent was used keep track of which ordered extents we needed to wait after logging metadata, but is not used anymore since commit 5636cf7d6dc86f ("btrfs: remove the logged extents infrastructure"), as we now always wait on ordered extent completion before logging metadata. So just remove it since it's doing nothing and making each ordered extent structure waste more memory (2 pointers). Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27btrfs: change timing for qgroup reserved space for ordered extents to fix ↵Qu Wenruo1-1/+21
reserved space leak [BUG] The following simple workload from fsstress can lead to qgroup reserved data space leak: 0/0: creat f0 x:0 0 0 0/0: creat add id=0,parent=-1 0/1: write f0[259 1 0 0 0 0] [600030,27288] 0 0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat() 0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0 This would cause btrfs qgroup to leak 20480 bytes for data reserved space. If btrfs qgroup limit is enabled, such leak can lead to unexpected early EDQUOT and unusable space. [CAUSE] When doing direct IO, kernel will try to writeback existing buffered page cache, then invalidate them: generic_file_direct_write() |- filemap_write_and_wait_range(); |- invalidate_inode_pages2_range(); However for btrfs, the bi_end_io hook doesn't finish all its heavy work right after bio ends. In fact, it delays its work further: submit_extent_page(end_io_func=end_bio_extent_writepage); end_bio_extent_writepage() |- btrfs_writepage_endio_finish_ordered() |- btrfs_init_work(finish_ordered_fn); <<< Work queue execution >>> finish_ordered_fn() |- btrfs_finish_ordered_io(); |- Clear qgroup bits This means, when filemap_write_and_wait_range() returns, btrfs_finish_ordered_io() is not guaranteed to be executed, thus the qgroup bits for related range are not cleared. Now into how the leak happens, this will only focus on the overlapping part of buffered and direct IO part. 1. After buffered write The inode had the following range with QGROUP_RESERVED bit: 596 616K |///////////////| Qgroup reserved data space: 20K 2. Writeback part for range [596K, 616K) Write back finished, but btrfs_finish_ordered_io() not get called yet. So we still have: 596K 616K |///////////////| Qgroup reserved data space: 20K 3. Pages for range [596K, 616K) get released This will clear all qgroup bits, but don't update the reserved data space. So we have: 596K 616K | | Qgroup reserved data space: 20K That number doesn't match the qgroup bit range anymore. 4. Dio prepare space for range [596K, 700K) Qgroup reserved data space for that range, we got: 596K 616K 700K |///////////////|///////////////////////| Qgroup reserved data space: 20K + 104K = 124K 5. btrfs_finish_ordered_range() gets executed for range [596K, 616K) Qgroup free reserved space for that range, we got: 596K 616K 700K | |///////////////////////| We need to free that range of reserved space. Qgroup reserved data space: 124K - 20K = 104K 6. btrfs_finish_ordered_range() gets executed for range [596K, 700K) However qgroup bit for range [596K, 616K) is already cleared in previous step, so we only free 84K for qgroup reserved space. 596K 616K 700K | | | We need to free that range of reserved space. Qgroup reserved data space: 104K - 84K = 20K Now there is no way to release that 20K unless disabling qgroup or unmounting the fs. [FIX] This patch will change the timing of btrfs_qgroup_release/free_data() call. Here it uses buffered COW write as an example. The new timing | The old timing ----------------------------------------+--------------------------------------- btrfs_buffered_write() | btrfs_buffered_write() |- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data() | btrfs_run_delalloc_range() | btrfs_run_delalloc_range() |- btrfs_add_ordered_extent() | |- btrfs_qgroup_release_data() | The reserved is passed into | btrfs_ordered_extent structure | | btrfs_finish_ordered_io() | btrfs_finish_ordered_io() |- The reserved space is passed to | |- btrfs_qgroup_release_data() btrfs_qgroup_record | The resereved space is passed | to btrfs_qgroup_recrod | btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents() |- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot() The point of such change is to ensure, when ordered extents are submitted, the qgroup reserved space is already released, to keep the timing aligned with file_write_and_wait_range(). So that qgroup data reserved space is all bound to btrfs_ordered_extent and solve the timing mismatch. Fixes: f695fdcef83a ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space") Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: drop argument tree from btrfs_lock_and_flush_ordered_rangeDavid Sterba1-7/+3
The tree pointer can be safely read from the inode so we can drop the redundant argument from btrfs_lock_and_flush_ordered_range. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: add assertions for tree == inode->io_tree to extent IO helpersDavid Sterba1-0/+2
Add assertions to all helpers that get tree as argument and verify that it's the same that can be obtained from the inode or from its pages. In followup patches the redundant arguments and assertions will be removed one by one. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: rename btrfs_put_fs_root and btrfs_grab_fs_rootJosef Bacik1-2/+2
We are now using these for all roots, rename them to btrfs_put_root() and btrfs_grab_root(); Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: delete the ordered isize update codeJosef Bacik1-128/+0
Now that we have a safe way to update the isize, remove all of this code as it's no longer needed. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-19Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extentsFilipe Manana1-1/+6
In btrfs_wait_ordered_range() once we find an ordered extent that has finished with an error we exit the loop and don't wait for any other ordered extents that might be still in progress. All the users of btrfs_wait_ordered_range() expect that there are no more ordered extents in progress after that function returns. So past fixes such like the ones from the two following commits: ff612ba7849964 ("btrfs: fix panic during relocation after ENOSPC before writeback happens") 28aeeac1dd3080 ("Btrfs: fix panic when starting bg cache writeout after IO error") don't work when there are multiple ordered extents in the range. Fix that by making btrfs_wait_ordered_range() wait for all ordered extents even after it finds one that had an error. Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554 CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-20btrfs: make btrfs_ordered_extent naming consistent with btrfs_file_extent_itemOmar Sandoval1-35/+34
ordered->start, ordered->len, and ordered->disk_len correspond to fi->disk_bytenr, fi->num_bytes, and fi->disk_num_bytes, respectively. It's confusing to translate between the two naming schemes. Since a btrfs_ordered_extent is basically a pending btrfs_file_extent_item, let's make the former use the naming from the latter. Note that I didn't touch the names in tracepoints just in case there are scripts depending on the current naming. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-20btrfs: Opencode ordered_data_tree_panicNikolay Borisov1-9/+3
It's a simple wrapper over btrfs_panic and is called only once. Just open code it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18Btrfs: fix block group remaining RO forever after error during device replaceFilipe Manana1-5/+1
When doing a device replace, while at scrub.c:scrub_enumerate_chunks(), we set the block group to RO mode and then wait for any ongoing writes into extents of the block group to complete. While doing that wait we overwrite the value of the variable 'ret' and can break out of the loop if an error happens without turning the block group back into RW mode. So what happens is the following: 1) btrfs_inc_block_group_ro() returns 0, meaning it set the block group to RO mode (its ->ro field set to 1 or incremented to some value > 1); 2) Then btrfs_wait_ordered_roots() returns a value > 0; 3) Then if either joining or committing the transaction fails, we break out of the loop wihtout calling btrfs_dec_block_group_ro(), leaving the block group in RO mode forever. To fix this, just remove the code that waits for ongoing writes to extents of the block group, since it's not needed because in the initial setup phase of a device replace operation, before starting to find all chunks and their extents, we set the target device for replace while holding fs_info->dev_replace->rwsem, which ensures that after releasing that semaphore, any writes into the source device are made to the target device as well (__btrfs_map_block() guarantees that). So while at scrub_enumerate_chunks() we only need to worry about finding and copying extents (from the source device to the target device) that were written before we started the device replace operation. Fixes: f0e9b7d6401959 ("Btrfs: fix race setting block group readonly during device replace") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: get rid of unique workqueue helper functionsOmar Sandoval1-1/+0
Commit 9e0af2376434 ("Btrfs: fix task hang under heavy compressed write") worked around the issue that a recycled work item could get a false dependency on the original work item due to how the workqueue code guarantees non-reentrancy. It did so by giving different work functions to different types of work. However, the fixes in the previous few patches are more complete, as they prevent a work item from being recycled at all (except for a tiny window that the kernel workqueue code handles for us). This obsoletes the previous fix, so we don't need the unique helpers for correctness. The only other reason to keep them would be so they show up in stack traces, but they always seem to be optimized to a tail call, so they don't show up anyways. So, let's just get rid of the extra indirection. While we're here, rename normal_work_helper() to the more informative btrfs_work_helper(). Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 07:35:11 +0000