summaryrefslogtreecommitdiff
path: root/fs/autofs4/autofs_i.h
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02rcu: Separate the RCU synchronization types and APIs into ↵Ingo Molnar1-0/+1
<linux/rcupdate_wait.h> So rcupdate.h is a pretty complex header, in particular it includes <linux/completion.h> which includes <linux/wait.h> - creating a dependency that includes <linux/wait.h> in <linux/sched.h>, which prevents the isolation of <linux/sched.h> from the derived <linux/wait.h> header. Solve part of the problem by decoupling rcupdate.h from completions: this can be done by separating out the rcu_synchronize types and APIs, and updating their usage sites. Since this is a mostly RCU-internal types this will not just simplify <linux/sched.h>'s dependencies, but will make all the hundreds of .c files that include rcupdate.h but not completions or wait.h build faster. ( For rcutiny this means that two dependent APIs have to be uninlined, but that shouldn't be much of a problem as they are rare variants. ) Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-03autofs: change autofs4_wait() to take struct pathIan Kent1-1/+2
In order to use the functions path_is_mountpoint() and path_has_submounts() autofs needs to pass a struct path in several places. Now change autofs4_wait() to take a struct path instead of a struct dentry. Link: http://lkml.kernel.org/r/20161011053413.27645.84666.stgit@pluto.themaw.net Signed-off-by: Ian Kent <raven@themaw.net> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Omar Sandoval <osandov@osandov.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-03autofs: change autofs4_expire_wait()/do_expire_wait() to take struct pathIan Kent1-1/+1
In order to use the functions path_is_mountpoint() and path_has_submounts() autofs needs to pass a struct path in several places. Start by changing autofs4_expire_wait() and do_expire_wait() to take a struct path instead of a struct dentry. Link: http://lkml.kernel.org/r/20161011053408.27645.40091.stgit@pluto.themaw.net Signed-off-by: Ian Kent <raven@themaw.net> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Omar Sandoval <osandov@osandov.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-11autofs: remove possibly misleading /* #define DEBUG */Tomohiro Kusumi1-2/+0
Having this in autofs_i.h gives illusion that uncommenting this enables pr_debug(), but it doesn't enable all the pr_debug() in autofs because inclusion order matters. XFS has the same DEBUG macro in its core header fs/xfs/xfs.h, however XFS seems to have a rule to include this prior to other XFS headers as well as kernel headers. This is not the case with autofs, and DEBUG could be enabled via Makefile, so autofs should just get rid of this comment to make the code less confusing. It's a comment, so there is literally no functional difference. Link: http://lkml.kernel.org/r/20160831033409.9910.77067.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11autofs: fix dev ioctl number range checkIan Kent1-1/+2
The count of miscellaneous device ioctls in fs/autofs4/autofs_i.h is wrong. The number of ioctls is the difference between AUTOFS_DEV_IOCTL_VERSION_CMD and AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD (14) not the difference between AUTOFS_IOC_COUNT and 11 (21). [kusumi.tomohiro@gmail.com: fix typo that made the count macro negative] Link: http://lkml.kernel.org/r/20160831033420.9910.16809.stgit@pluto.themaw.net Link: http://lkml.kernel.org/r/20160812024841.12352.11975.stgit@pluto.themaw.net Signed-off-by: Ian Kent <raven@themaw.net> Cc: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11autofs: remove obsolete sb fieldsTomohiro Kusumi1-2/+0
These two were left from commit aa55ddf340c9 ("autofs4: remove unused ioctls") which removed unused ioctls. Link: http://lkml.kernel.org/r/20160812024810.12352.96377.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <ikent@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11autofs: drop unnecessary extern in autofs_i.hTomohiro Kusumi1-1/+1
autofs4_kill_sb() doesn't need to be declared as extern, and no other functions in .h are explicitly declared as extern. Link: http://lkml.kernel.org/r/20160812024739.12352.99354.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-12autofs racesAl Viro1-2/+6
* make autofs4_expire_indirect() skip the dentries being in process of expiry * do *not* mess with list_move(); making sure that dentry with AUTOFS_INF_EXPIRING are not picked for expiry is enough. * do not remove NO_RCU when we set EXPIRING, don't bother with smp_mb() there. Clear it at the same time we clear EXPIRING. Makes a bunch of tests simpler. * rename NO_RCU to WANT_EXPIRE, which is what it really is. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-15autofs4: use pr_xxx() macros directly for loggingIan Kent1-11/+4
Use the standard pr_xxx() log macros directly for log prints instead of the AUTOFS_XXX() macros. Signed-off-by: Ian Kent <ikent@redhat.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15autofs4: change log print macros to not insert newlineIan Kent1-3/+3
Common kernel coding practice is to include the newline of log prints within the log text rather than hidden away in a macro. To avoid introducing inconsistencies as changes are made change the log macros to not include the newline. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15autofs4: make autofs log prints consistentIan Kent1-3/+3
Use the pr_*() print in AUTOFS_*() macros instead of printks and include the module name in log message macros. Also use the AUTOFS_*() macros everywhere instead of raw printks. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15autofs4: coding style fixesIan Kent1-28/+27
Try and make the coding style completely consistent throughtout the autofs module and inline with kernel coding style recommendations. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-23make simple_positive() publicAl Viro1-5/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells1-2/+2
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11autofs: switch to __vfs_write()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-14autofs4: avoid taking fs_lock during rcu-walkNeilBrown1-0/+4
->fs_lock protects AUTOFS_INF_EXPIRING. We need to be sure that once the flag is set, no new references beneath the dentry are taken. So rcu-walk currently needs to take fs_lock before checking the flag. This hurts performance. Change the expiry to a two-stage process. First set AUTOFS_INF_NO_RCU which forces any path walk into ref-walk mode, then drop the lock and call synchronize_rcu(). Once that returns we can be sure no rcu-walk is active beneath the dentry and we can check reference counts again. Now during an RCU-walk we can test AUTOFS_INF_EXPIRING without taking the lock as along as we test AUTOFS_INF_NO_RCU too. If either are set, we must abort the RCU-walk If neither are set, we know that refcounts will be tested again after we finish the RCU-walk so we are safe to continue. ->fs_lock is still taken in d_manage() to check for a non-trap directory. That will be resolved in the next patch. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Ian Kent <raven@themaw.net> Tested-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14autofs4: allow RCU-walk to walk through autofs4NeilBrown1-1/+1
This series teaches autofs about RCU-walk so that we don't drop straight into REF-walk when we hit an autofs directory, and so that we avoid spinlocks as much as possible when performing an RCU-walk. This is needed so that the benefits of the recent NFS support for RCU-walk are fully available when NFS filesystems are automounted. Patches have been carefully reviewed and tested both with test suites and in production - thanks a lot to Ian Kent for his support there. This patch (of 6): Any attempt to look up a pathname that passes though an autofs4 mount is currently forced out of RCU-walk into REF-walk. This can significantly hurt performance of many-thread work loads on many-core systems, especially if the automounted filesystem supports RCU-walk but doesn't get to benefit from it. So if autofs4_d_manage is called with rcu_walk set, only fail with -ECHILD if it is necessary to wait longer than a spinlock. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Ian Kent <raven@themaw.net> Tested-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08autofs4: remove some unused inline functionsNeilBrown1-49/+0
{__,}manage_dentry_{set,clear}_{automount,transit} are 4 unused inline functions. Discard them. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08autofs4: remove unused autofs4_ispending()NeilBrown1-14/+0
Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23autofs4: allow autofs to work outside the initial PID namespaceSukadev Bhattiprolu1-2/+2
Enable autofs4 to work in a "container". oz_pgrp is converted from pid_t to struct pid and this is stored at mount time based on the "pgrp=" option or if the option is missing then the current pgrp. The "pgrp=" option is interpreted in the PID namespace of the current process. This option is flawed in that it doesn't carry the namespace information, so it should be deprecated. AFAICS the autofs daemon always sends the current pgrp, which is the default anyway. The oz_pgrp is also set from the AUTOFS_DEV_IOCTL_SETPIPEFD_CMD ioctl. This ioctl sets oz_pgrp to the current pgrp. It is not allowed to change the pid namespace. oz_pgrp is used mainly to determine whether the process traversing the autofs mount tree is the autofs daemon itself or not. This function now compares the pid pointers instead of the pid_t values. One other use of oz_pgrp is in autofs4_show_options. There is shows the virtual pid number (i.e. the one that is valid inside the PID namespace of the calling process) For debugging printk convert oz_pgrp to the value in the initial pid namespace. Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Eric Biederman <ebiederm@xmission.com> Acked-by: Ian Kent <raven@themaw.net> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-24autofs4: make freeing sbi rcu-delayedAl Viro1-0/+1
makes ->d_managed() safety in RCU mode independent from vfsmount_lock Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24file->f_op is never NULL...Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22new helper: file_inode(file)Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-14userns: Support autofs4 interacing with multiple user namespacesEric W. Biederman1-4/+4
Use kuid_t and kgid_t in struct autofs_info and struct autofs_wait_queue. When creating directories and symlinks default the uid and gid of the mount requester to the global root uid and gid. autofs4_wait will update these fields when a mount is requested. When generating autofsv5 packets report the uid and gid of the mount requestor in user namespace of the process that opened the pipe, reporting unmapped uids and gids as overflowuid and overflowgid. In autofs_dev_ioctl_requester return the uid and gid of the last mount requester converted into the calling processes user namespace. When the uid or gid don't map return overflowuid and overflowgid as appropriate, allowing failure to find a mount requester to be distinguished from failure to map a mount requester. The uid and gid mount options specifying the user and group of the root autofs inode are converted into kuid and kgid as they are parsed defaulting to the current uid and current gid of the process that mounts autofs. Mounting of autofs for the present remains confined to processes in the initial user namespace. Cc: Ian Kent <raven@themaw.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-29autofs: make the autofsv5 packet file descriptor use a packetized pipeLinus Torvalds1-0/+11
The autofs packet size has had a very unfortunate size problem on x86: because the alignment of 'u64' differs in 32-bit and 64-bit modes, and because the packet data was not 8-byte aligned, the size of the autofsv5 packet structure differed between 32-bit and 64-bit modes despite looking otherwise identical (300 vs 304 bytes respectively). We first fixed that up by making the 64-bit compat mode know about this problem in commit a32744d4abae ("autofs: work around unhappy compat problem on x86-64"), and that made a 32-bit 'systemd' work happily on a 64-bit kernel because everything then worked the same way as on a 32-bit kernel. But it turned out that 'automount' had actually known and worked around this problem in user space, so fixing the kernel to do the proper 32-bit compatibility handling actually *broke* 32-bit automount on a 64-bit kernel, because it knew that the packet sizes were wrong and expected those incorrect sizes. As a result, we ended up reverting that compatibility mode fix, and thus breaking systemd again, in commit fcbf94b9dedd. With both automount and systemd doing a single read() system call, and verifying that they get *exactly* the size they expect but using different sizes, it seemed that fixing one of them inevitably seemed to break the other. At one point, a patch I seriously considered applying from Michael Tokarev did a "strcmp()" to see if it was automount that was doing the operation. Ugly, ugly. However, a prettier solution exists now thanks to the packetized pipe mode. By marking the communication pipe as being packetized (by simply setting the O_DIRECT flag), we can always just write the bigger packet size, and if user-space does a smaller read, it will just get that partial end result and the extra alignment padding will simply be thrown away. This makes both automount and systemd happy, since they now get the size they asked for, and the kernel side of autofs simply no longer needs to care - it could pad out the packet arbitrarily. Of course, if there is some *other* user of autofs (please, please, please tell me it ain't so - and we haven't heard of any) that tries to read the packets with multiple writes, that other user will now be broken - the whole point of the packetized mode is that one system call gets exactly one packet, and you cannot read a packet in pieces. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-28Revert "autofs: work around unhappy compat problem on x86-64"Linus Torvalds1-1/+0
This reverts commit a32744d4abae24572eff7269bc17895c41bd0085. While that commit was technically the right thing to do, and made the x86-64 compat mode work identically to native 32-bit mode (and thus fixing the problem with a 32-bit systemd install on a 64-bit kernel), it turns out that the automount binaries had workarounds for this compat problem. Now, the workarounds are disgusting: doing an "uname()" to find out the architecture of the kernel, and then comparing it for the 64-bit cases and fixing up the size of the read() in automount for those. And they were confused: it's not actually a generic 64-bit issue at all, it's very much tied to just x86-64, which has different alignment for an 'u64' in 64-bit mode than in 32-bit mode. But the end result is that fixing the compat layer actually breaks the case of a 32-bit automount on a x86-64 kernel. There are various approaches to fix this (including just doing a "strcmp()" on current->comm and comparing it to "automount"), but I think that I will do the one that teaches pipes about a special "packet mode", which will allow user space to not have to care too deeply about the padding at the end of the autofs packet. That change will make the compat workaround unnecessary, so let's revert it first, and get automount working again in compat mode. The packetized pipes will then fix autofs for systemd. Reported-and-requested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Ian Kent <raven@themaw.net> Cc: stable@kernel.org # for 3.3 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-25autofs: work around unhappy compat problem on x86-64Ian Kent1-0/+1
When the autofs protocol version 5 packet type was added in commit 5c0a32fc2cd0 ("autofs4: add new packet type for v5 communications"), it obvously tried quite hard to be word-size agnostic, and uses explicitly sized fields that are all correctly aligned. However, with the final "char name[NAME_MAX+1]" array at the end, the actual size of the structure ends up being not very well defined: because the struct isn't marked 'packed', doing a "sizeof()" on it will align the size of the struct up to the biggest alignment of the members it has. And despite all the members being the same, the alignment of them is different: a "__u64" has 4-byte alignment on x86-32, but native 8-byte alignment on x86-64. And while 'NAME_MAX+1' ends up being a nice round number (256), the name[] array starts out a 4-byte aligned. End result: the "packed" size of the structure is 300 bytes: 4-byte, but not 8-byte aligned. As a result, despite all the fields being in the same place on all architectures, sizeof() will round up that size to 304 bytes on architectures that have 8-byte alignment for u64. Note that this is *not* a problem for 32-bit compat mode on POWER, since there __u64 is 8-byte aligned even in 32-bit mode. But on x86, 32-bit and 64-bit alignment is different for 64-bit entities, and as a result the structure that has exactly the same layout has different sizes. So on x86-64, but no other architecture, we will just subtract 4 from the size of the structure when running in a compat task. That way we will write the properly sized packet that user mode expects. Not pretty. Sadly, this very subtle, and unnecessary, size difference has been encoded in user space that wants to read packets of *exactly* the right size, and will refuse to touch anything else. Reported-and-tested-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11autofs4: deal with autofs4_write/autofs4_write racesAl Viro1-0/+1
Just serialize the actual writing of packets into pipe on a new mutex, independent from everything else in the locking hierarchy. As soon as something has started feeding a piece of packet into the pipe to daemon, we *want* everything else about to try the same to wait until we are done. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03autofs4: propagate umode_tAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-08autofs4: clean up uaotfs use of debug/info/warning printoutsLinus Torvalds1-18/+8
Use 'pr_debug()' for DPRINTK, which will do the proper type checking on the arguments (without generating code) even when DEBUG isn't #defined. Also, use the standard __VA_ARGS__ for the macros, and stop the pointless abuse of 'do { xyz } while (0)' when the macro is already a perfectly well-formed single statement. Reported-by: David Howells <dhowells@redhat.com> Suggested-by: Joe Perches <joe@perches.com> Cc: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-24autofs4 - remove autofs4_lockIan Kent1-2/+0
The autofs4_lock introduced by the rcu-walk changes has unnecessarily broad scope. The locking is better handled by the per-autofs super block lookup_lock. Signed-off-by: Ian Kent <raven@themaw.net> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: clean ->d_release() and autofs4_free_ino() upAl Viro1-1/+0
The latter is called only when both ino and dentry are about to be freed, so cleaning ->d_fsdata and ->dentry is pointless. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: split autofs4_init_ino()Al Viro1-1/+2
split init_ino into new_ino and clean_ino; the former is what used to be init_ino(NULL, sbi), the latter is for cases where we passed non-NULL ino. Lose unused arguments. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: autofs4_get_inode() doesn't need autofs_info * argument anymoreAl Viro1-1/+1
Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: kill ->size in autofs_infoAl Viro1-2/+0
It's used only to pass the length of symlink body to autofs4_get_inode() in autofs4_dir_symlink(). We can bloody well set inode->i_size in autofs4_dir_symlink() directly and be done with that. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: pass mode to autofs4_get_inode() explicitlyAl Viro1-3/+2
In all cases we'd set inf->mode to know value just before passing it to autofs4_get_inode(). That kills the need to store it in autofs_info and pass it to autofs_init_ino() Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: keep symlink body in inode->i_privateAl Viro1-5/+0
gets rid of all ->free()/->u.symlink machinery in autofs; we simply keep symlink bodies in inode->i_private and free them in ->evict_inode(). Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15autofs4: Merge the remaining dentry ops tablesDavid Howells1-1/+0
Merge the remaining autofs4 dentry ops tables. It doesn't matter if d_automount and d_manage are present on something that's not mountable or holdable as these ops are only used if the appropriate flags are set in dentry->d_flags. [AV] switch to ->s_d_op, since now _everything_ on autofs4 is using the same dentry_operations. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15autofs4: Clean up dentry operationsIan Kent1-5/+2
There are now two distinct dentry operations uses. One for dentrys that trigger mounts and one for dentrys that do not. Rationalize the use of these dentry operations and rename them to reflect their function. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15autofs4: Clean up inode operationsIan Kent1-3/+0
Since the use of ->follow_link() has been eliminated there is no need to separate the indirect and direct inode operations. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15autofs4: Remove unused codeIan Kent1-7/+0
Remove code that is not used due to the use of ->d_automount() and ->d_manage(). Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15autofs4: Add d_manage() dentry operationIan Kent1-1/+49
This patch required a previous patch to add the ->d_automount() dentry operation. Add a function to use the newly defined ->d_manage() dentry operation for blocking during mount and expire. Whether the VFS calls the dentry operations d_automount() and d_manage() is controled by the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags. autofs uses the d_automount() operation to callback to user space to request mount operations and the d_manage() operation to block walks into mounts that are under construction or destruction. In order to prevent these functions from being called unnecessarily the DMANAGED_* flags are cleared for cases which would cause this. In the common case the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags are both set for dentrys waiting to be mounted. The DMANAGED_TRANSIT flag is cleared upon successful mount request completion and set during expire runs, both during the dentry expire check, and if selected for expire, is left set until a subsequent successful mount request completes. The exception to this is the so-called rootless multi-mount which has no actual mount at its base. In this case the DMANAGED_AUTOMOUNT flag is cleared upon successful mount request completion as well and set again after a successful expire. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15autofs4: Add d_automount() dentry operationIan Kent1-0/+30
Add a function to use the newly defined ->d_automount() dentry operation for triggering mounts instead of doing the user space callback in ->lookup() and ->d_revalidate(). Note, to be useful the subsequent patch to add the ->d_manage() dentry operation is also needed so the discussion of functionality is deferred to that patch. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15Add a dentry op to allow processes to be held during pathwalk transitDavid Howells1-13/+0
Add a dentry op (d_manage) to permit a filesystem to hold a process and make it sleep when it tries to transit away from one of that filesystem's directories during a pathwalk. The operation is keyed off a new dentry flag (DCACHE_MANAGE_TRANSIT). The filesystem is allowed to be selective about which processes it holds and which it permits to continue on or prohibits from transiting from each flagged directory. This will allow autofs to hold up client processes whilst letting its userspace daemon through to maintain the directory or the stuff behind it or mounted upon it. The ->d_manage() dentry operation: int (*d_manage)(struct path *path, bool mounting_here); takes a pointer to the directory about to be transited away from and a flag indicating whether the transit is undertaken by do_add_mount() or do_move_mount() skipping through a pile of filesystems mounted on a mountpoint. It should return 0 if successful and to let the process continue on its way; -EISDIR to prohibit the caller from skipping to overmounted filesystems or automounting, and to use this directory; or some other error code to return to the user. ->d_manage() is called with namespace_sem writelocked if mounting_here is true and no other locks held, so it may sleep. However, if mounting_here is true, it may not initiate or wait for a mount or unmount upon the parameter directory, even if the act is actually performed by userspace. Within fs/namei.c, follow_managed() is extended to check with d_manage() first on each managed directory, before transiting away from it or attempting to automount upon it. follow_down() is renamed follow_down_one() and should only be used where the filesystem deliberately intends to avoid management steps (e.g. autofs). A new follow_down() is added that incorporates the loop done by all other callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS and CIFS do use it, their use is removed by converting them to use d_automount()). The new follow_down() calls d_manage() as appropriate. It also takes an extra parameter to indicate if it is being called from mount code (with namespace_sem writelocked) which it passes to d_manage(). follow_down() ignores automount points so that it can be used to mount on them. __follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to sleep. It would be possible to enter d_manage() in rcu-walk mode too, and have that determine whether to abort or not itself. That would allow the autofs daemon to continue on in rcu-walk mode. Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't required as every tranist from that directory will cause d_manage() to be invoked. It can always be set again when necessary. ========================== WHAT THIS MEANS FOR AUTOFS ========================== Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to trigger the automounting of indirect mounts, and both of these can be called with i_mutex held. autofs knows that the i_mutex will be held by the caller in lookup(), and so can drop it before invoking the daemon - but this isn't so for d_revalidate(), since the lock is only held on _some_ of the code paths that call it. This means that autofs can't risk dropping i_mutex from its d_revalidate() function before it calls the daemon. The bug could manifest itself as, for example, a process that's trying to validate an automount dentry that gets made to wait because that dentry is expired and needs cleaning up: mkdir S ffffffff8014e05a 0 32580 24956 Call Trace: [<ffffffff885371fd>] :autofs4:autofs4_wait+0x674/0x897 [<ffffffff80127f7d>] avc_has_perm+0x46/0x58 [<ffffffff8009fdcf>] autoremove_wake_function+0x0/0x2e [<ffffffff88537be6>] :autofs4:autofs4_expire_wait+0x41/0x6b [<ffffffff88535cfc>] :autofs4:autofs4_revalidate+0x91/0x149 [<ffffffff80036d96>] __lookup_hash+0xa0/0x12f [<ffffffff80057a2f>] lookup_create+0x46/0x80 [<ffffffff800e6e31>] sys_mkdirat+0x56/0xe4 versus the automount daemon which wants to remove that dentry, but can't because the normal process is holding the i_mutex lock: automount D ffffffff8014e05a 0 32581 1 32561 Call Trace: [<ffffffff80063c3f>] __mutex_lock_slowpath+0x60/0x9b [<ffffffff8000ccf1>] do_path_lookup+0x2ca/0x2f1 [<ffffffff80063c89>] .text.lock.mutex+0xf/0x14 [<ffffffff800e6d55>] do_rmdir+0x77/0xde [<ffffffff8005d229>] tracesys+0x71/0xe0 [<ffffffff8005d28d>] tracesys+0xd5/0xe0 which means that the system is deadlocked. This patch allows autofs to hold up normal processes whilst the daemon goes ahead and does things to the dentry tree behind the automouter point without risking a deadlock as almost no locks are held in d_manage() and none in d_automount(). Signed-off-by: David Howells <dhowells@redhat.com> Was-Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-07fs: dcache remove dcache_lockNick Piggin1-0/+3
dcache_lock no longer protects anything. remove it. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache scale subdirsNick Piggin1-0/+11
Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache scale d_unhashedNick Piggin1-13/+0
Protect d_unhashed(dentry) condition with d_lock. This means keeping DCACHE_UNHASHED bit in synch with hash manipulations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2010-03-03Revert "autofs4: always use lookup for lookup"Al Viro1-7/+0
This reverts commit 213614d583748d00967a91cacd656f417efb36ce. Alas, ->d_revalidate() can't rely on ->lookup() finishing what it's started; if d_alloc() in do_lookup() fails, we are not going to call ->lookup() at all. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16autofs4: always use lookup for lookupIan Kent1-0/+7
We need to be able to cope with the directory mutex being held during ->d_revalidate() in some cases, but not all cases, and not necessarily by us. Because we need to release the mutex when we call back to the daemon to do perform a mount we must be sure that it is us who holds the mutex so we must redirect mount requests to ->lookup() if the mutex is held. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Sage Weil <sage@newdream.net> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Yehuda Saheh <yehuda@newdream.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16autofs4: use autofs_info for pending flagIan Kent1-1/+2
Eliminate the use of the d_lock spin lock by using the autofs super block info spin lock. This reduces the number of spin locks we use by one and makes the code for the following patch (to redirect ->d_revalidate() to ->lookup()) a little simpler. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Sage Weil <sage@newdream.net> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Yehuda Saheh <yehuda@newdream.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>