Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
|
|
Pull drm fixes from Daniel Vetter:
"Just small fixes all over here, all quiet as it should.
drivers:
- amd: mostly amdgpu display fixes + radeon vm NULL deref fix
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting"
* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/mcr: Avoid clobbering DSS steering
drm/xe: fix error handling in xe_migrate_update_pgtables
drm/ttm: Always take the bo delayed cleanup path for imported bos
drm/fbdev-generic: Fix framebuffer on big endian devices
drm/panthor: Fix sync-only jobs
drm/panthor: Don't check the array stride on empty uobj arrays
drm/amdgpu/atomfirmware: silence UBSAN warning
drm/radeon: check bo_va->bo is non-NULL before using it
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
drm/amd/display: Update efficiency bandwidth for dcn351
drm/amd/display: Fix refresh rate range for some panel
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
drm/amd/display: Add refresh rate range check
drm/amd/display: Reset freesync config before update new state
drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
drm: panel-orientation-quirks: Add quirk for Valve Galileo
drm/i915/display: For MTL+ platforms skip mg dp programming
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
firmware: sysfb: Fix reference count of sysfb parent device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
driver:
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the 'ngpios' property in
gpio-mmio"
* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: add polarity quirk for TSC2005
gpio: mmio: do not calculate bgpio_bits via "ngpios"
gpiolib: of: fix lookup quirk for MIPS Lantiq
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-07-03:
amdgpu:
- Freesync fixes
- DML1 bandwidth fix
- DCN 3.5 fixes
- DML2 fix
- Silence an UBSAN warning
radeon:
- GPUVM fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703184723.1981997-1-alexander.deucher@amd.com
|
|
DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low". In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493bff8.
Fixes: d0d89493bff8 ("Input: tsc2004/5 - switch to using generic device properties")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZoWXwYtwgJIxi-hD@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().
Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix and add physical to virtual address translations in dasd and
virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
More code cleanup will follow.
- Small defconfig updates
* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
s390/vfio_ccw: Fix target addresses of TIC CCWs
s390: Update defconfigs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Hans de Goede:
- Fix regression in toshiba_acpi introduced in 6.10-rc1
* tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: toshiba_acpi: Fix quickstart quirk handling
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.10-rc7:
- Add panel quirks.
- Firmware sysfb refcount fix.
- Another null pointer mode deref fix for nouveau.
- Panthor sync and uobj fixes.
- Fix fbdev regression since v6.7.
- Delay free imported bo in ttm to fix lockdep splat.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffba0c63-2798-40b6-948d-361cd3b14e9f@linux.intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- One copy/paste mistake fix.
- One error path fix causing an error pointer dereference.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZoZ-wD66lgjiNh72@fedora
|
|
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
Fixes: 438ba39b25fe ("bnxt_en: Improve RSS context reservation infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20240625010210.2002310-1-kuba@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240703180112.78590-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
file
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b217127e5e4e ("mlxsw: core_linecards: Add line card objects and implement provisioning")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.
The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626210536.1620176-2-matthew.d.roper@intel.com
(cherry picked from commit 4f82ac6102788112e599a6074d2c1f2afce923df)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Don't call drm_suballoc_free with sa_bo pointing to PTR_ERR.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2120
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620102025.127699-2-matthew.auld@intel.com
(cherry picked from commit ce6b63336f79ec5f3996de65f452330e395f99ae)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Bos can be put with multiple unrelated dma-resv locks held. But
imported bos attempt to grab the bo dma-resv during dma-buf detach
that typically happens during cleanup. That leads to lockde splats
similar to the below and a potential ABBA deadlock.
Fix this by always taking the delayed workqueue cleanup path for
imported bos.
Requesting stable fixes from when the Xe driver was introduced,
since its usage of drm_exec and wide vm dma_resvs appear to be
the first reliable trigger of this.
[22982.116427] ============================================
[22982.116428] WARNING: possible recursive locking detected
[22982.116429] 6.10.0-rc2+ #10 Tainted: G U W
[22982.116430] --------------------------------------------
[22982.116430] glxgears:sh0/5785 is trying to acquire lock:
[22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0
[22982.116438]
but task is already holding lock:
[22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116442]
other info that might help us debug this:
[22982.116442] Possible unsafe locking scenario:
[22982.116443] CPU0
[22982.116444] ----
[22982.116444] lock(reservation_ww_class_mutex);
[22982.116445] lock(reservation_ww_class_mutex);
[22982.116447]
*** DEADLOCK ***
[22982.116447] May be due to missing lock nesting notation
[22982.116448] 5 locks held by glxgears:sh0/5785:
[22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe]
[22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe]
[22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe]
[22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe]
[22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116719]
stack backtrace:
[22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ #10
[22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[22982.116723] Call Trace:
[22982.116724] <TASK>
[22982.116725] dump_stack_lvl+0x77/0xb0
[22982.116727] __lock_acquire+0x1232/0x2160
[22982.116730] lock_acquire+0xcb/0x2d0
[22982.116732] ? dma_buf_detach+0x3b/0xf0
[22982.116734] ? __lock_acquire+0x417/0x2160
[22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0
[22982.116738] ? dma_buf_detach+0x3b/0xf0
[22982.116741] ? dma_buf_detach+0x3b/0xf0
[22982.116743] ? ww_mutex_lock+0x2b/0x90
[22982.116745] ww_mutex_lock+0x2b/0x90
[22982.116747] dma_buf_detach+0x3b/0xf0
[22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm]
[22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe]
[22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290
[22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec]
[22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec]
[22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe]
[22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe]
[22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe]
[22982.117025] ? xa_find+0xe3/0x1e0
[22982.117028] xe_file_close+0x10a/0x1c0 [xe]
[22982.117074] drm_file_free+0x22a/0x280 [drm]
[22982.117099] drm_release_noglobal+0x22/0x70 [drm]
[22982.117119] __fput+0xf1/0x2d0
[22982.117122] task_work_run+0x59/0x90
[22982.117125] do_exit+0x330/0xb40
[22982.117127] do_group_exit+0x36/0xa0
[22982.117129] get_signal+0xbd2/0xbe0
[22982.117131] arch_do_signal_or_restart+0x3e/0x240
[22982.117134] syscall_exit_to_user_mode+0x1e7/0x290
[22982.117137] do_syscall_64+0xa1/0x180
[22982.117139] ? lock_acquire+0xcb/0x2d0
[22982.117140] ? __set_task_comm+0x28/0x1e0
[22982.117141] ? find_held_lock+0x2b/0x80
[22982.117144] ? __set_task_comm+0xe1/0x1e0
[22982.117145] ? lock_release+0xca/0x290
[22982.117147] ? __do_sys_prctl+0x245/0xab0
[22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190
[22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290
[22982.117152] ? do_syscall_64+0xa1/0x180
[22982.117154] ? __lock_acquire+0x417/0x2160
[22982.117155] ? reacquire_held_locks+0xd1/0x1f0
[22982.117156] ? do_user_addr_fault+0x30c/0x790
[22982.117158] ? lock_acquire+0xcb/0x2d0
[22982.117160] ? find_held_lock+0x2b/0x80
[22982.117162] ? do_user_addr_fault+0x357/0x790
[22982.117163] ? lock_release+0xca/0x290
[22982.117164] ? do_user_addr_fault+0x361/0x790
[22982.117166] ? trace_hardirqs_off+0x4b/0xc0
[22982.117168] ? clear_bhb_loop+0x45/0xa0
[22982.117170] ? clear_bhb_loop+0x45/0xa0
[22982.117172] ? clear_bhb_loop+0x45/0xa0
[22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[22982.117176] RIP: 0033:0x7f943d267169
[22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f.
[22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
[22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169
[22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0
[22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff
[22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0
[22982.117202] </TASK>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628153848.4989-1-thomas.hellstrom@linux.intel.com
|
|
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
IOW, calling _test_bit() avoids potential compile-time optimizations.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc3b ("ice: read internal temperature sensor")
Acked-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc1/0x5e0 mm/kasan/report.c:475
kasan_report+0xbe/0xf0 mm/kasan/report.c:588
strlen+0x7d/0xa0 lib/string.c:418
__fortify_strlen include/linux/fortify-string.h:210 [inline]
in4_pton+0xa3/0x3f0 net/core/utils.c:130
bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
__bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
__bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
dev_attr_store+0x54/0x80 drivers/base/core.c:2366
sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x96a/0xd80 fs/read_write.c:584
ksys_write+0x122/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---
Fix it by adding a check of string length before using it.
Fixes: f9de11a16594 ("bonding: add ip checks when store ip target")
Signed-off-by: Yue Sun <samsun1006219@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The use-after-free is actually in rswitch_tx_free(), which is inlined in
rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the
same pointer, the skb is first freed using dev_kfree_skb_any(), then the
value in skb->len is used to update the interface statistics.
Let's move around the instructions to use skb->len before the skb is
freed.
This bug is trivial to reproduce using KFENCE. It will trigger a splat
every few packets. A simple ARP request or ICMP echo request is enough.
Fixes: 271e015b9153 ("net: rswitch: Add unmap_addrs instead of dma address in each desc")
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240702210838.2703228-1-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When del_timer_sync() is called in an interrupt context it throws a warning
because of potential deadlock. The timer is used only to exit from
wait_for_completion() after a timeout so replacing the call with
wait_for_completion_timeout() allows to remove the problematic timer and
its related functions altogether.
Fixes: 41561f28e76a ("i2c: New Philips PNX bus driver")
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Atish Patra <atishp@rivosinc.com> says:
This series contains 3 fixes out of which the first one is a new fix
for invalid event data reported in lkml[2]. The last two are v3 of Samuel's
patch[1]. I added the RB/TB/Fixes tag and moved 1 unrelated change
to its own patch. I also changed an error message in kvm vcpu_pmu from
pr_err to pr_debug to avoid redundant failure error messages generated
due to the boot time quering of events implemented in the patch[1]
Here is the original cover letter for the patch[1]
Before this patch:
$ perf list hw
List of pre-defined events (to be used in -e or -M):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
ref-cycles [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
$ perf stat -ddd true
Performance counter stats for 'true':
4.36 msec task-clock # 0.744 CPUs utilized
1 context-switches # 229.325 /sec
0 cpu-migrations # 0.000 /sec
38 page-faults # 8.714 K/sec
4,375,694 cycles # 1.003 GHz (60.64%)
728,945 instructions # 0.17 insn per cycle
79,199 branches # 18.162 M/sec
17,709 branch-misses # 22.36% of all branches
181,734 L1-dcache-loads # 41.676 M/sec
5,547 L1-dcache-load-misses # 3.05% of all L1-dcache accesses
<not counted> LLC-loads (0.00%)
<not counted> LLC-load-misses (0.00%)
<not counted> L1-icache-loads (0.00%)
<not counted> L1-icache-load-misses (0.00%)
<not counted> dTLB-loads (0.00%)
<not counted> dTLB-load-misses (0.00%)
<not counted> iTLB-loads (0.00%)
<not counted> iTLB-load-misses (0.00%)
<not counted> L1-dcache-prefetches (0.00%)
<not counted> L1-dcache-prefetch-misses (0.00%)
0.005860375 seconds time elapsed
0.000000000 seconds user
0.010383000 seconds sys
After this patch:
$ perf list hw
List of pre-defined events (to be used in -e or -M):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
$ perf stat -ddd true
Performance counter stats for 'true':
5.16 msec task-clock # 0.848 CPUs utilized
1 context-switches # 193.817 /sec
0 cpu-migrations # 0.000 /sec
37 page-faults # 7.171 K/sec
5,183,625 cycles # 1.005 GHz
961,696 instructions # 0.19 insn per cycle
85,853 branches # 16.640 M/sec
20,462 branch-misses # 23.83% of all branches
243,545 L1-dcache-loads # 47.203 M/sec
5,974 L1-dcache-load-misses # 2.45% of all L1-dcache accesses
<not supported> LLC-loads
<not supported> LLC-load-misses
<not supported> L1-icache-loads
<not supported> L1-icache-load-misses
<not supported> dTLB-loads
19,619 dTLB-load-misses
<not supported> iTLB-loads
6,831 iTLB-load-misses
<not supported> L1-dcache-prefetches
<not supported> L1-dcache-prefetch-misses
0.006085625 seconds time elapsed
0.000000000 seconds user
0.013022000 seconds sys
[1] https://lore.kernel.org/linux-riscv/20240418014652.1143466-1-samuel.holland@sifive.com/
[2] https://lore.kernel.org/all/CC51D53B-846C-4D81-86FC-FBF969D0A0D6@pku.edu.cn/
* b4-shazam-merge:
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-0-e01cfddcf035@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The RISC-V SBI PMU specification defines several standard hardware and
cache events. Currently, all of these events are exposed to userspace,
even when not actually implemented. They appear in the `perf list`
output, and commands like `perf stat` try to use them.
This is more than just a cosmetic issue, because the PMU driver's .add
function fails for these events, which causes pmu_groups_sched_in() to
prematurely stop scheduling in other (possibly valid) hardware events.
Add logic to check which events are supported by the hardware (i.e. can
be mapped to some counter), so only usable events are reported to
userspace. Since the kernel does not know the mapping between events and
possible counters, this check must happen during boot, when no counters
are in use. Make the check asynchronous to minimize impact on boot time.
Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-3-e01cfddcf035@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, we stop all the counters while a new cpu is brought online.
However, the hpmevent to counter mappings are not reset. The firmware may
have some stale encoding in their mapping structure which may lead to
undesirable results. We have not encountered such scenario though.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-2-e01cfddcf035@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In case of an counter overflow, the event data may get corrupted
if called from an external overflow handler. This happens because
we can't update the counter without starting it when SBI PMU
extension is in use. However, the prev_count has been already
updated at the first pass while the counter value is still the
old one.
The solution is simple where we don't need to update it again
if it is already updated which can be detected using hwc state.
The event state in the overflow handler is updated in the following
patch. Thus, this fix can't be backported to kernel version where
overflow support was added.
Fixes: a8625217a054 ("drivers/perf: riscv: Implement SBI PMU snapshot function")
Closes:https://lore.kernel.org/all/CC51D53B-846C-4D81-86FC-FBF969D0A0D6@pku.edu.cn/
Reported-by: garthlei@pku.edu.cn
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-1-e01cfddcf035@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some fixes related to the IPU6 driver"
* tag 'media/v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ivsc: Depend on IPU_BRIDGE or not IPU_BRIDGE
media: intel/ipu6: Fix a null pointer dereference in ipu6_isys_query_stream_by_source
media: ipu6: Use the ISYS auxdev device as the V4L2 device's device
|
|
Fix invalid dereferencing of indirect CCW data pointer in
dasd_eckd_dump_sense() that leads to a kernel panic in error cases.
When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer
does not contain the data address itself but a pointer to the IDAL.
This needs to be translated from physical to virtual as well before
using it.
This dereferencing is also used for dasd_page_cache and also fixed
although it is very unlikely that this code path ever gets used.
Fixes: c0bd39601c13 ("s390/dasd: use new address translation helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
iwl_mvm_get_bss_vif might return a NULL or ERR_PTR. Some of the callers
check only the NULL case, and some doesn't check at all.
Some of the callers even have a pointer to the mvmvif of the bss vif,
so we don't even need to call this function, and can simply get the vif
from mvmvif. Do it for those cases, and for the others - properly check
if IS_ERR_OR_NULL
Fixes: ec0d43d26f2c ("wifi: iwlwifi: mvm: Activate EMLSR based on traffic volume")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064027.a661f8c65aac.I45cf09b01af8ee3d55828863958ead741ea43b7f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We already iterate the link bss_conf/link_info and have the
pointer, or know that deflink/bss_conf is used, so avoid an
extra lookup and just pass the pointer. This may also avoid
a crash when this is processed during restart, where the FW
to link conf array (link_id_to_link_conf) may be NULLed out.
Fixes: c1e458b987f2 ("wifi: iwlwifi: mvm: Move beacon filtering to be per link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064026.346a6ef67a86.Iba5d65d728ca9f58518c88d029496c1250670544@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since we now want to sync the queues even when we're in RFKILL, we
shouldn't wake up the wait queue since we still expect to get all the
notifications from the firmware.
Fixes: 4d08c0b3357c ("wifi: iwlwifi: mvm: handle BA session teardown in RF-kill")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064027.be7a9dbeacde.I5586cb3ca8d6e44f79d819a48a0c22351ff720c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the
WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command
version in the firmware has advanced to 4, which prevents the
flag from being set correctly, fix that.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064026.a0f162108575.If1a9785727d2a1b0197a396680965df1b53d4096@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
made sure that the IEs data was manipulated under the relevant RCU section.
Unfortunately, while doing so, the commit brought a faulty implicit cast
from int to u8 on the ies_len variable, making the parsing fail to be
performed correctly if the IEs block is larger than 255 bytes. This failure
can be observed with Access Points appending a lot of IEs TLVs in their
beacon frames (reproduced with a Pixel phone acting as an Access Point,
which brough 273 bytes of IE data in my testing environment).
Fix IEs parsing by removing this undesired implicit cast.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jozef Hopko <jozef.hopko@altana.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240701-wilc_fix_ies_data-v1-1-7486cbacf98a@bootlin.com
|
|
bgpio_bits must be aligned with the data bus width. For example, on a
32 bit big endian system and we only have 16 GPIOs. If we only assume
bgpio_bits=16 we can never control the GPIO because the base address
is the lowest address.
low address high address
-------------------------------------------------
| byte3 | byte2 | byte1 | byte0 |
-------------------------------------------------
| NaN | NaN | gpio8-15 | gpio0-7 |
-------------------------------------------------
Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Fixes: https://github.com/openwrt/openwrt/issues/15739
Reported-by: Mark Mentovai <mark@mentovai.com>
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Suggested-By: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Lóránd Horváth <lorand.horvath82@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/TYCP286MB089577B47D70F0AB25ABA6F5BCD52@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The processing of a Transfer-In-Channel (TIC) CCW requires locating
the target of the CCW in the channel program, and updating the
address to reflect what will actually be sent to hardware.
An error exists where the 64-bit virtual address is truncated to
32-bits (variable "cda") when performing this math. Since s390
addresses of that size are 31-bits, this leaves that additional
bit enabled such that the resulting I/O triggers a channel
program check. This shows up occasionally when booting a KVM
guest from a passthrough DASD device:
..snip...
Interrupt Response Block Data:
: 0x0000000000003990
Function Ctrl : [Start]
Activity Ctrl :
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status :
Channel Status : [Program-Check]
cpa=: 0x00000000008d0018
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
...snip...
dasd-ipl: Failed to run IPL1 channel program
The channel program address of "0x008d0018" in the IRB doesn't
look wrong, but tracing the CCWs shows the offending bit enabled:
ccw=0x0000012e808d0000 cda=00a0b030
ccw=0x0000012e808d0008 cda=00a0b038
ccw=0x0000012e808d0010 cda=808d0008
ccw=0x0000012e808d0018 cda=00a0b040
Fix the calculation of the TIC CCW's data address such that it points
to a valid 31-bit address regardless of the input address.
Fixes: bd36cfbbb9e1 ("s390/vfio_ccw_cp: use new address translation helpers")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240628163738.3643513-1-farman@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN
stripping") enables MAC level VLAN tag stripping for all MAC cores, but
leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac
and xgmac.
On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and
driver do nothing about VLAN packets actually, although VLAN works well.
Driver level stripping should be used on gmac and xgmac for now.
Fixes: 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN stripping")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Starting with kernel 6.7, the framebuffer text console is not working
anymore with the virtio-gpu device on s390x hosts. Such big endian fb
devices are usinga different pixel ordering than little endian devices,
e.g. DRM_FORMAT_BGRX8888 instead of DRM_FORMAT_XRGB8888.
This used to work fine as long as drm_client_buffer_addfb() was still
calling drm_mode_addfb() which called drm_driver_legacy_fb_format()
internally to get the right format. But drm_client_buffer_addfb() has
recently been reworked to call drm_mode_addfb2() instead with the
format value that has been passed to it as a parameter (see commit
6ae2ff23aa43 ("drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()").
That format parameter is determined in drm_fbdev_generic_helper_fb_probe()
via the drm_mode_legacy_fb_format() function - which only generates
formats suitable for little endian devices. So to fix this issue
switch to drm_driver_legacy_fb_format() here instead to take the
device endianness into consideration.
Fixes: 6ae2ff23aa43 ("drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()")
Closes: https://issues.redhat.com/browse/RHEL-45158
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627173530.460615-1-thuth@redhat.com
|
|
A sync-only job is meant to provide a synchronization point on a
queue, so we can't return a NULL fence there, we have to add a signal
operation to the command stream which executes after all other
previously submitted jobs are done.
v2:
- Fixed a UAF bug
- Added R-bs
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703071640.231278-3-boris.brezillon@collabora.com
|
|
The user is likely to leave all the drm_panthor_obj_array fields
to zero when the array is empty, which will cause an EINVAL failure.
v2:
- Added R-bs
Fixes: 4bdca1150792 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703071640.231278-2-boris.brezillon@collabora.com
|
|
__netif_rx()
The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.
[74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526
[74412.556784] caller is netif_rx_internal+0x42/0x130
[74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5
[74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024
[74412.581699] Call Trace:
[74412.584514] <TASK>
[74412.586933] dump_stack_lvl+0x55/0x70
[74412.591129] check_preemption_disabled+0xc8/0xf0
[74412.596374] netif_rx_internal+0x42/0x130
[74412.600957] __netif_rx+0x20/0xd0
[74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev]
[74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport]
[74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport]
[74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd]
[74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd]
[74412.634046] irq_thread_fn+0x21/0x60
[74412.638134] ? irq_thread+0xa8/0x290
[74412.642218] irq_thread+0x1a0/0x290
[74412.646212] ? __pfx_irq_thread_fn+0x10/0x10
[74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10
[74412.656117] ? __pfx_irq_thread+0x10/0x10
[74412.660686] kthread+0x100/0x130
[74412.664384] ? __pfx_kthread+0x10/0x10
[74412.668639] ret_from_fork+0x31/0x50
[74412.672716] ? __pfx_kthread+0x10/0x10
[74412.676978] ret_from_fork_asm+0x1a/0x30
[74412.681457] </TASK>
The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.
While the following commit changed from netif_rx() to __netif_rx(),
baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."),
the change should've been a noop instead. However, the code precedes this
fix should've been using netif_rx_ni() or netif_rx_any_context().
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Reported-by: Jerry Dai <jerry.dai@intel.com>
Tested-by: Jerry Dai <jerry.dai@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20240701181538.3799546-1-dave.jiang@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The header is missing the include guards so add them.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: fb470f70fea7 ("net: phy: aquantia: add hwmon support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240701080322.9569-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a variable sized array.
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/110420.html
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes
Pull Qualcomm clk driver fixes from Bjorn Andersson:
- Correct the Stromer Plus PLL set_rate to explicitly set ALPHA_EN bit and
remove unnecessary upper parts of CONFIG_CTL values.
- Mark the recently added IPQ9574 GCC crypto clocks BRANCH_HALT_VOTED, to
address stuck clock warnings.
- Fix the GPLL6 and GPLL7 parents on SM6350 to avoid issues with these
reportedly running at ~25GHz.
* tag 'qcom-clk-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
|
|
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|