summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23habanalabs/gaudi2: add PCI revision 2 supportOfir Bitton9-17/+39
Add support for Gaudi2 Device with PCI revision 2. Functionality is exactly the same as revision 1, the only difference is device name exposed to user. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: remove redundant gaudi2_sec asic typeOfir Bitton5-9/+1
As Gaudi2 has a single PCI id, the secured asic type is redundant. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: add warning print upon a PCI errorOfir Bitton1-2/+7
In order to know if driver catches PCI errors correctly, we need to print a warning per each error. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: fix PCIe access to SRAM via debugfsTomer Tayar1-3/+3
hl_access_sram_dram_region() uses a region base which is set within the hl_set_dram_bar() function. However, for SRAM access this function is not called, and we end up with a wrong value of region base and with a bad calculated address. Fix it by initializing the region base value independently of whether hl_set_dram_bar() is called or not. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: zero ts registration buff when allocatedfarah kassabri1-1/+1
To avoid memory corruption in kernel memory while using timestamp registration nodes, zero the kernel buff memory when its allocated. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: no consecutive err when user context is enabledTal Cohen1-0/+4
Consecutive error protects a device reset loop from being triggered due to h/w issues and enters the device into an unavailable state. When user may cause the error, an unavailable state will prevent the user from running its workloads. The commit prevents entering consecutive state when a user context is enabled. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: use graceful hard reset for CS timeoutsTomer Tayar1-8/+8
Use graceful hard reset when detecting a CS timeout that requires a device reset. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi2: use graceful hard reset for F/W eventsTomer Tayar1-17/+10
Use graceful hard reset for F/W events on Gaudi2 device that require a device reset. While at it, do a small refactor of the checks and function calls, to simplify it and to avoid code duplication. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi: use graceful hard reset for F/W eventsTomer Tayar1-9/+7
Use graceful hard reset for F/W events on Gaudi device that require a device reset. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: add an option to control watchdog timeout via debugfsTomer Tayar1-0/+5
Add an option to control the timeout value for the driver's watchdog of the reset process. The timeout represents the amount of the user has to close his process once he gets a device reset notification from the driver. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: add support for graceful hard resetTomer Tayar2-15/+140
Calling hl_device_reset() for a hard reset will lead to a quite immediate device reset and to killing user process. For resets that follow errors, it disables the option to debug the errors on both the device side and the user application side. This patch adds a 'graceful hard reset' option and a new hl_device_cond_reset() function. Under some conditions, mainly if there is no user process or if he is not registered to driver notifications, this function will execute hard reset as usual. Otherwise, the reset will be postponed and a notification will be sent to user, to let him perform post-error actions and then to release the device, after which reset will take place. If device is not released by user in some defined time, a watchdog work will execute the reset in any case. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: avoid divide by zero in device utilizationOhad Sharabi1-2/+7
Currently there is no verification whether the divisor is legal. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: fix user mappings calculation in case of page faultDani Liberman1-2/+7
As there are 2 types of user mappings, pmmu and hmmu, calculate only the relevant mappings for the requested type. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi2: remove configurations to access the MSI-X doorbellTomer Tayar1-31/+3
The virtual MSI-X doorbell is supported now in F/W, so all configurations to access the PCIE_DBI MSI-X doorbell can be removed. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: allow setting HBM BAR to other regionsOhad Sharabi2-13/+18
Up until now the use-case in the driver was that the HBM is accessed using the HBM BAR, yet the BAR sometimes cannot cover the whole HBM and so we needed to set the BAR to other HBM offset. Now we are facing the need to access other PCI memory regions that can be covered by the HBM BAR. To answer that we are allowing the caller to determine if the HBM BAR need to be set or not regardless of the PCI memory region. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: fix using freed pointerOhad Sharabi1-1/+4
The code uses the pointer for trace purpose (without actually dereference it) but still get static analysis warning. This patch eliminate the warning. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi2: unsecure CBU_EARLY_BRESP registersDilip Puri1-0/+1
NIC ARCs need to have access to CBU_EARLY_BRESP, hence we unsecure those registers. Signed-off-by: Dilip Puri <dilipp@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: verify no zero event is sentTal Cohen2-1/+8
The event notifier mechanism should not raise an empty event (event equals zero). Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi2: capture page fault dataDani Liberman1-0/+1
Capture page fault data when it happens. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi2: capture RAZWI informationDani Liberman1-17/+238
Added function to calculate possible engines which caused RAZWI (read-only zero, write ignored), from a given router id or module index. When getting RAZWI via PSOC IP, first the router id is calculated and then the possible engines that caused the RAZWI are calculated. There is a possibility that the RAZWI initiator is not an engine. In that case, it will not be included in possible engines as it doesn't have an engine id. RAZWI information is captured when receiving event from engine or via PSOC IP. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: handle HBM MMU when capturing page fault dataDani Liberman1-8/+21
In case of HBM MMU page fault, capture its relevant mappings. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: move reset workqueue to be under hl_deviceTomer Tayar2-15/+12
'struct hl_device_reset_work' is used as a wrapper for the reset work and its parameters, including the reset workqueue on which it runs. In a future commit, another reset related work with similar parameters is going to be added, but it won't use the reset workqueue. As in any case there is a single reset workqueue, and to allow the resue of this structure, move the reset workqueue to 'struct hl_device'. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: allow unregistering eventfd when device non-operationalTomer Tayar1-3/+3
Unregistering eventfd is for releasing host resources and doesn't involve an access to the device. As such, there is no reason to disallow it when device isn't operational. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: skip idle status check if reset on device releaseTomer Tayar1-9/+7
If reset upon device release is enabled, there is no need to check the device idle status in hpriv_release(), because device is going to be reset in any case. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi2: add device unavailable notificationTal Cohen1-2/+10
Device unavailable notifies the user that there isn't an option to retrieve debug information from the device. When a critical device error occurs and the f/w performs the device reset, a device unavailable notification shall be sent to the user process. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi2: remove privileged MME clock configurationKoby Elbaz1-6/+1
Privileged MME clock configuration is removed as it is done by the f/w. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: replace 'pf' to 'prefetch'Dafna Hirschfeld3-22/+22
pf was an abbreviation for prefetch but because pf already stands for 'physical function', we decided to change it to 'prefetch'. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: add page fault info uapiDani Liberman5-1/+124
Only the first page fault will be saved. Besides the address which caused the page fault, the driver captures all of the mmu user mappings. User can retrieve this data via the new uapi (new opcode in INFO ioctl). Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs/gaudi2: fix module ID for RAZWI handlingTomer Tayar1-1/+7
RAZWI is optionally handled as part of the generic QM SEI error handling, but it always uses PDMA as the module ID. Fix it to use the suitable module ID according to the specific event. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: use lower_32_bits()Bharat Jauhari1-3/+3
This fixes sparse warning on doing cast to 32-bits Signed-off-by: Bharat Jauhari <bjauhari@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: refactor razwi event notificationDani Liberman5-70/+61
This event notification was compatible only with gaudi, where razwi and page fault happens together. To make it compatible with all ASICs, this refactor contains: 1. Razwi notification will only notify about razwi info. New notification will be added in future patch, to retrieve data about page fault error. 2. Changed razwi info structure to support all ASICs. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: Use simplified API for p2p dist calcOded Gabbay1-1/+1
Use the simplified API that calculates distance between two devices. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: allow control device open during resetOfir Bitton3-2/+26
Monitoring apps would like to query device state at any time so we should allow it also during reset because it doesn't involve accessing the h/w. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-23habanalabs: fix return value check in hl_fw_get_sec_attest_data()Yang Yingliang1-1/+1
If hl_cpu_accessible_dma_pool_alloc() fails, we should check 'req_cpu_addr', fix it. Fixes: 0c88760f8f5e ("habanalabs/gaudi2: add secured attestation info uapi") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-11-21Merge 6.1-rc6 into char-misc-nextGreg Kroah-Hartman480-2285/+4571
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-19Merge tag 'scsi-fixes' of ↵Linus Torvalds5-19/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Five small fixes, all in drivers. Most of these are error leg freeing issues, with the only really user visible one being the zfcp fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix possible memory leak when device_register() failed scsi: zfcp: Fix double free of FSF request when qdio send fails scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper() scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus() scsi: mpi3mr: Suppress command reply debug prints
2022-11-19Merge tag 'iommu-fixes-v6.1-rc5' of ↵Linus Torvalds2-7/+6
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Preset accessed bits in Intel VT-d page-directory entries to avoid hardware error - Set supervisor bit only when Intel IOMMU has the SRS capability * tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Set SRE bit only when hardware has SRS cap iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
2022-11-19iommu/vt-d: Set SRE bit only when hardware has SRS capTina Zhang1-2/+3
SRS cap is the hardware cap telling if the hardware IOMMU can support requests seeking supervisor privilege or not. SRE bit in scalable-mode PASID table entry is treated as Reserved(0) for implementation not supporting SRS cap. Checking SRS cap before setting SRE bit can avoid the non-recoverable fault of "Non-zero reserved field set in PASID Table Entry" caused by setting SRE bit while there is no SRS cap support. The fault messages look like below: DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000 [fault reason 0x5a] SM: Non-zero reserved field set in PASID Table Entry Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface") Cc: stable@vger.kernel.org Signed-off-by: Tina Zhang <tina.zhang@intel.com> Link: https://lore.kernel.org/r/20221115070346.1112273-1-tina.zhang@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20221116051544.26540-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-19iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entriesTina Zhang1-5/+3
The A/D bits are preseted for IOVA over first level(FL) usage for both kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED). Presetting A bit in FL requires to preset the bit in every related paging entries, including the non-leaf ones. Otherwise, hardware may treat this as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might occur with below DMAR fault messages (wrapped for line length) dumped. DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000 [fault reason 0x90] SM: A/D bit update needed in first-level entry when set up in no snoop Fixes: 289b3b005cb9 ("iommu/vt-d: Preset A/D bits for user space DMA usage") Cc: stable@vger.kernel.org Signed-off-by: Tina Zhang <tina.zhang@intel.com> Link: https://lore.kernel.org/r/20221113010324.1094483-1-tina.zhang@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20221116051544.26540-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-18Merge tag 'input-for-v6.1-rc5' of ↵Linus Torvalds6-13/+33
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for 8042 to stop leaking platform device on unload - a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we need to reset controller to load config from firmware - a workaround for Acer Switch to avoid interrupt storm from home and power buttons - a workaround for more ASUS ZenBook models to detect keyboard controller - a fix for iforce driver to properly handle communication errors - touchpad on HP Laptop 15-da3001TU switched to RMI mode * tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix leaking of platform device on module removal Input: i8042 - apply probe defer to more ASUS ZenBook models Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[] Input: soc_button_array - add use_low_level_irq module parameter Input: iforce - invert valid length check when fetching device IDs Input: goodix - try resetting the controller when no config is set dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
2022-11-18Input: i8042 - fix leaking of platform device on module removalChen Jun1-4/+0
Avoid resetting the module-wide i8042_platform_device pointer in i8042_probe() or i8042_remove(), so that the device can be properly destroyed by i8042_exit() on module unload. Fixes: 9222ba68c3f4 ("Input: i8042 - add deferred probe support") Signed-off-by: Chen Jun <chenjun102@huawei.com> Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-11-18Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linuxLinus Torvalds6-2/+11
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira) - Memory leak fix in nvmet (Sagi Grimberg) - Regression fix for block cgroups pinning the wrong blkcg, causing leaks of cgroups and blkcgs (Chris) - UAF fix for drbd setup error handling (Dan) - Fix DMA alignment propagation in DM (Keith) * tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux: dm-log-writes: set dma_alignment limit in io_hints dm-integrity: set dma_alignment limit in io_hints block: make blk_set_default_limits() private dm-crypt: provide dma_alignment limit in io_hints block: make dma_alignment a stacking queue_limit nvmet: fix a memory leak in nvmet_auth_set_key nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 drbd: use after free in drbd_create_device() nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro blk-cgroup: properly pin the parent in blkcg_css_online
2022-11-18Merge tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds37-116/+310
Pull drm fixes from Dave Airlie: "I guess the main question is are things settling down, and I'd say kinda, these are all pretty small fixes, nothing big stands out really, just seems to be quite a few of them. Mostly amdgpu and core fixes, with some i915, tegra, vc4, panel bits. core: - Fix potential memory leak in drm_dev_init() - Fix potential null-ptr-deref in drm_vblank_destroy_worker() - Revert hiding unregistered connectors from userspace, as it breaks on DP-MST - Add workaround for DP++ dual mode adaptors that don't support i2c subaddressing i915: - Fix uaf with lmem_userfault_list handling amdgpu: - gang submit fixes - Fix a possible memory leak in ganng submit error path - DP tunneling fixes - DCN 3.1 page flip fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - Don't expose degamma on hardware that doesn't support it - BACO fixes for SMU 11.x - BACO fixes for SMU 13.x - Virtual display fix for devices with no display hardware amdkfd: - Memory limit regression fix tegra: - tegra20 GART fix vc4: - Fix error handling in vc4_atomic_commit_tail() lima: - Set lima's clkname corrrectly when regulator is missing panel: - Set bpc for logictechno panels" * tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm: (28 commits) gpu: host1x: Avoid trying to use GART on Tegra20 drm/display: Don't assume dual mode adaptors support i2c sub-addressing drm/amd/pm: fix SMU13 runpm hang due to unintentional workaround drm/amd/pm: enable runpm support over BACO for SMU13.0.7 drm/amd/pm: enable runpm support over BACO for SMU13.0.0 drm/amdgpu: there is no vbios fb on devices with no display hw (v2) drm/amdkfd: Fix a memory limit issue drm/amdgpu: disable BACO support on more cards drm/amd/display: don't enable DRM CRTC degamma property for DCE drm/amd/display: Set max for prefetch lines on dcn32 drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32 drm/amd/display: Fix prefetch calculations for dcn32 drm/amd/display: Fix optc2_configure warning on dcn314 drm/amd/display: Fix calculation for cursor CAB allocation Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL" drm/amd/display: Support parsing VRAM info v3.0 from VBIOS drm/amd/display: Fix invalid DPIA AUX reply causing system hang drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo drm/amd/display: Add HUBP surface flip interrupt handler drm/amd/display: Fix access timeout to DPIA AUX at boot time ...
2022-11-18Merge tag 's390-6.1-5' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Alexander Gordeev: - Fix deadlock in discontiguous saved segments (DCSS) block device driver. When adding a disk and scanning partitions the scan would not break out early without a missed flag. - Avoid using global register variable for current_stack_pointer due to an old bug in gcc versions prior to gcc-8.4. Due to this bug a broken code is generated, which leads to stack corruptions. * tag 's390-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: avoid using global register for current_stack_pointer s390/dcssblk: fix deadlock when adding a DCSS
2022-11-18Merge tag 'for-6.1/dm-fixes-2' of ↵Linus Torvalds3-8/+18
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix misbehavior if list_versions DM ioctl races with module loading - Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed - Allow DM integrity devices to be activated in read-only mode * tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: clear the journal on suspend dm integrity: flush the journal on suspend dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed dm ioctl: fix misbehavior if list_versions races with module loading
2022-11-19Merge tag 'drm/tegra/for-6.1-rc6' of ↵Dave Airlie2-0/+8
https://gitlab.freedesktop.org/drm/tegra into drm-fixes drm/tegra: Fixes for v6.1-rc6 This contains a single fix that avoids using the GART on Tegra20 because it doesn't work well with the way the Tegra DRM driver tries to use it. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118121614.3511110-1-thierry.reding@gmail.com
2022-11-18Merge tag 'usb-6.1-rc6' of ↵Linus Torvalds11-51/+90
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are a number of USB driver fixes and new device ids for 6.1-rc6. Included in here are: - new usb-serial device ids - dwc3 driver fixes for reported problems - cdns3 driver fixes - new USB device quirks - typec driver fixes - extcon USB typec driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: option: add u-blox LARA-L6 modem USB: serial: option: add u-blox LARA-R6 00B modem USB: serial: option: remove old LARA-R6 PID USB: serial: option: add Fibocom FM160 0x0111 composition usb: add NO_LPM quirk for Realforce 87U Keyboard usb: cdns3: host: fix endless superspeed hub port reset usb: chipidea: fix deadlock in ci_otg_del_timer usb: dwc3: Do not get extcon device when usb-role-switch is used usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handler usb: typec: mux: Enter safe mode only when pins need to be reconfigured extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered Revert "usb: dwc3: disable USB core PHY management" usb: dwc3: gadget: Return -ESHUTDOWN on ep disable USB: bcma: Make GPIO explicitly optional USB: serial: option: add Sierra Wireless EM9191
2022-11-18Merge tag 'staging-6.1-rc6' of ↵Linus Torvalds1-8/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 6.1-rc6. It resolves a bogus signed character test as pointed out, and fixed by, Jason in the rtl8192e driver It has been in linux-next for a few weeks now with no reported problems" * tag 'staging-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8192e: remove bogus ssid character sign test
2022-11-18Merge tag 'tty-6.1-rc6' of ↵Linus Torvalds6-88/+136
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for 6.1-rc6. They all resolve reported problems: - kernel doc build problems with the -rc1 serial driver documentation update - n_gsm reported problems - imx serial driver missing callback - lots of tiny 8250 driver fixes for reported issues. All of these have been in linux-next for over a week with no reported problems" * tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c serial: 8250: Flush DMA Rx on RLSI serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake serial: 8250_lpss: Configure DMA also w/o DMA filter serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send Revert "tty: n_gsm: replace kicktimer with delayed_work" Revert "tty: n_gsm: avoid call of sleeping functions from atomic context" serial: imx: Add missing .thaw_noirq hook tty: serial: fsl_lpuart: don't break the on-going transfer when global reset serial: 8250: omap: Flush PM QOS work on remove serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove() serial: 8250_omap: remove wait loop from Errata i202 workaround serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl() serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()
2022-11-18Merge tag 'char-misc-6.1-rc6' of ↵Linus Torvalds20-72/+108
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc and other driver fixes for 6.1-rc6 to resolve some reported problems. Included in here are: - iio driver fixes - binder driver fix - nvmem driver fix - vme_vmci information leak fix - parport fix - slimbus configuration fix - coreboot firmware bugfix - speakup build fix and crash fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits) firmware: coreboot: Register bus in module init nvmem: u-boot-env: fix crc32_data_offset on redundant u-boot-env slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m docs: update mediator contact information in CoC doc slimbus: stream: correct presence rate frequencies nvmem: lan9662-otp: Fix compatible string binder: validate alloc->mm in ->mmap() handler parport_pc: Avoid FIFO port location truncation siox: fix possible memory leak in siox_device_add() misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram() speakup: replace utils' u_char with unsigned char speakup: fix a segfault caused by switching consoles tools: iio: iio_generic_buffer: Fix read size iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler() iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger() iio: adc: mp2629: fix potential array out of bound access iio: adc: mp2629: fix wrong comparison of channel iio: pressure: ms5611: changed hardcoded SPI speed to value limited iio: pressure: ms5611: fixed value compensation bug iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID. ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 22:04:08 +0000