summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-12-16net: Use skb_checksum_start_offset()Michał Mirosław5-9/+7
Replace skb->csum_start - skb_headroom(skb) with skb_checksum_start_offset(). Note for usb/smsc95xx: skb->data - skb->head == skb_headroom(skb). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding: add the debugfs interface to see RLB hash tableTaku Izumi1-0/+50
This patch provices the debugfs interface to see RLB hash table like the following: # cat /sys/kernel/debug/bonding/bond0/rlb_hash_table SourceIP DestinationIP Destination MAC DEV 10.124.196.205 10.124.196.205 ff:ff:ff:ff:ff:ff eth4 10.124.196.205 10.124.196.81 00:19:99:XX:XX:XX eth3 10.124.196.205 10.124.196.1 00:21:d8:XX:XX:XX eth0 This is helpful to check if the receive load balancing works as expected. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding: migrate some macros from bond_alb.c to bond_alb.hTaku Izumi2-36/+38
This patch simply migrates some macros from bond_alb.c to bond_alb.h. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: NUMA-aware Tx queue allocationsDimitris Michailidis1-7/+10
Allocate Tx queue memory on the node indicated by the new netdev_queue_numa_node_read. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: extend VPD parsingDimitris Michailidis1-20/+21
Current code parses the VPD RO section for keywords but makes static assumptions about the location of the section. Remove them and parse the VPD to find it. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: add const to static arraysJoe Perches1-24/+24
Patch originally from Joe Perches, unmodified. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: remove a bitmapDimitris Michailidis2-3/+1
The driver keeps a bitmap of the netdevs it registered so it knows what to unregister later. Remove that and look at reg_state instead. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: remove the name field from the adapter structureDimitris Michailidis2-23/+15
Remove a field the driver uses to keep track of the name of the first netdev it manages to register. Do this by changing the registration loop to stop the first time it fails so the first registered device is trivial to tell. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: correct formatting of MSI-X interrupt namesDimitris Michailidis1-14/+7
The last byte of the buffer for MSI-X names could not be used due to a bogus -1. Also do not explicitly clear the last byte, snprintf will do the right thing. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: allocate more space for MSI-X interrupt namesDimitris Michailidis1-1/+1
Currently MSI-X names for netdevs with long names are truncated in /proc/interrupts due to insufficient space. Use IFNAMSIZ to size the needed space. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: print port information after registering each netdevDimitris Michailidis1-32/+22
Print information about each port when its netdev is registered instead of looping separately over the ports at the end. The bulk of this patch is due to indentation change. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: distinguish between 1-lane KR/KX and 4-lane KR/KX/KX4 portsDimitris Michailidis2-2/+8
And fix the supported flags ethtool reports for the two cases. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: set the number of queues before device registrationDimitris Michailidis1-5/+5
The number of queues is known early, move the calls to netif_set_real_num_[rt]x_queues before register_netdev. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: do not read the clock frequency from VPDDimitris Michailidis1-3/+1
No need to read the clock frequency from VPD, we already get it a bit later from FW, after any potential adjustments. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: enable PCIe relaxed orderingDimitris Michailidis2-0/+19
Enable relaxed ordering for descriptor reads and packet I/O. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: update version to 1.62.00-2Vladislav Zolotarov1-2/+2
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: replace FW to 6.2.5Vladislav Zolotarov1-2/+2
Includes FCoE releated fixes in FW flows Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: Add DCB/PFC support - link layerVladislav Zolotarov3-39/+689
Add appropriate HW DCB/PFC configuration Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add DCB supportVladislav Zolotarov9-5/+2050
Adding DCB initialization and handling on 57712 FW/HW Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add a select queue callbackVladislav Zolotarov3-0/+33
This callback required to allow FCoE traffic to be sent on separate priority queue from other L2 traffic, which is managed by PFC in HW. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add FCoE ringVladislav Zolotarov7-241/+631
Includes new driver structures and FW/HW configuration for FCoE ring Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-14Merge branch 'vhost-net-next' of ↵David S. Miller5-30/+352
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-12-14Merge branch 'for-davem' of ↵David S. Miller85-2101/+3615
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-12-13net: Abstract default ADVMSS behind an accessor.David S. Miller1-1/+1
Make all RTAX_ADVMSS metric accesses go through a new helper function, dst_metric_advmss(). Leave the actual default metric as "zero" in the real metric slot, and compute the actual default value dynamically via a new dst_ops AF specific callback. For stacked IPSEC routes, we use the advmss of the path which preserves existing behavior. Unlike ipv4/ipv6, DecNET ties the advmss to the mtu and thus updates advmss on pmtu updates. This inconsistency in advmss handling results in more raw metric accesses than I wish we ended up with. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Replace netif_rx to netif_receive_skbTomoya1-1/+1
Since this driver is implemented as NAPI, netif_receive_skb must be used not netif_rx. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Add setting TEC/REC statistics processingTomoya1-0/+3
Add setting TEC/REC statistics processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Optimize "if" condition in rx/tx processingTomoya1-16/+10
For reduce "if" condition, easy to read/understand the code, optimize "if" condition in rx/tx processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix incorrect return processingTomoya1-9/+10
Fix incorrect return processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Move MSI processing to probe/remove processingTomoya1-15/+14
Currently, in case this driver is integrated as module, and when this module is re-installed, no interrupts is to be occurred. For the above issue, move MSI processing to open/release processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Comment optimizationTomoya1-7/+7
Comment optimization Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix miss-setting status issueTomoya1-1/+1
Modify miss-setting status issue at suspend. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix bit timing calculation issueTomoya1-4/+2
Modify like use calculated value directly passed by CAN core module. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Delete unnecessary/redundant codeTomoya1-12/+1
Delete unnecessary/redundant code Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix coding rule violationTomoya1-24/+21
Fix coding rule violation. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Replace netdev_dbg instead of dev_dbg partlyTomoya1-8/+8
For easy to readable, use netdev_dbg instead of dev_dbg partly Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Change Copyright and module descriptionTomoya1-2/+2
Currently, Copyright and module description are not formal. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Reduce register accessTomoya1-34/+21
For improve tx/rx speed, reduce register access. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Change functions typeTomoya1-8/+10
Currently, these two functions spec(returned value) is unnatural. Thus, change the return value's spec Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Rename function/macro nameTomoya1-99/+77
For easy to read/understand, Rename function/macro name. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix warningsTomoya1-73/+73
Currently, in case CONFIG_PM is disabled, compiler outputs warnings. Move six functions which are used only CONFIG_PM is enabled, into "#ifdef CONFIG_PM" area. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Improve rx processingTomoya1-76/+82
Replace complex "goto" to "do~while". For easy to read/understand, it divides a rx function into some functions. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix endianness issueTomoya1-27/+20
there is endianness issue both Tx and Rx. Currently, data is set like below. Register: MSB--LSB x x D0 D1 x x D2 D3 x x D4 D5 x x D6 D7 But Data to be sent must be set like below. Register: MSB--LSB x x D1 D0 x x D3 D2 x x D5 D4 x x D7 D6 (x means reserved area.) Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Divide poll functionTomoya1-36/+35
To easy to read/understand, divide poll function into two sub-functions. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Add flow control processingTomoya1-19/+12
Currently, there is no flow control processing. Thus, Add flow control processing as when there is no empty of tx buffer, netif_stop_queue is called. When there is empty buffer, netif_wake_queue is called. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13Merge branch 'master' of ↵John W. Linville85-2101/+3615
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-12-13ehea: Use the standard logging functionsJoe Perches5-297/+278
Remove ehea_error, ehea_info and ehea_debug macros. Use pr_fmt, pr_<level>, netdev_<level> and netif_<level> as appropriate. Fix messages to use trailing "\n", some messages had an extra one as the old ehea_<level> macros added a trailing "\n". Coalesced long format strings. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-12ipv4: Don't pre-seed hoplimit metric.David S. Miller1-1/+1
Always go through a new ip4_dst_hoplimit() helper, just like ipv6. This allowed several simplifications: 1) The interim dst_metric_hoplimit() can go as it's no longer userd. 2) The sysctl_ip_default_ttl entry no longer needs to use ipv4_doint_and_flush, since the sysctl is not cached in routing cache metrics any longer. 3) ipv4_doint_and_flush no longer needs to be exported and therefore can be marked static. When ipv4_doint_and_flush_strategy was removed some time ago, the external declaration in ip.h was mistakenly left around so kill that off too. We have to move the sysctl_ip_default_ttl declaration into ipv4's route cache definition header net/route.h, because currently net/ip.h (where the declaration lives now) has a back dependency on net/route.h Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-12net: Abstract RTAX_HOPLIMIT metric accesses behind helper.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-12hostap: don't use flush_scheduled_work()Tejun Heo2-1/+10
flush_scheduled_work() is on its way out. Drop flush_scheduled_work() from prism2_free_local_data() and replace it with explicit flushing of work items on the respective free functions. Work items in ap_data are flushed from hostap_free_data() and the ones in local_info from prism2_free_local_data(). Flush is used instead of cancel as some process and free items from queue. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: netdev@vger.kernel.org
2010-12-12i2400m: drop i2400m_schedule_work()Tejun Heo4-96/+21
i2400m implements dynamic work allocation and queueing mechanism in i2400_schedule_work(); however, this is only used for reset and recovery which can be served equally well with preallocated per device works. Replace i2400m_schedule_work() with two work structs in struct i2400m. These works are explicitly canceled when the device is released making calls to flush_scheduled_work(), which is being deprecated, unnecessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: linux-wimax@intel.com Cc: netdev@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 16:33:52 +0000