summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-10-30net: dsa/mv88e6123_61_65: Report chip temperatureGuenter Roeck1-2/+66
MV88E6123 and compatible chips support reading the chip temperature from PHY register 6:26. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa/mv88e6352: Report chip temperatureGuenter Roeck1-0/+101
MV88E6352 supports reading the chip temperature from two PHY registers, 6:26 and 6:27. Report it using the more accurate register 6:27. Also report temperature limit and alarm. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa/mv88e6352: Add support for MV88E6176Guenter Roeck2-2/+5
MV88E6176 is mostly compatible to MV88E6352 and is documented in the same functional specification. Add support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Add support for Marvell 88E6352Guenter Roeck5-0/+485
Marvell 88E6352 is mostly compatible to MV88E6123/61/65, but requires indirect phy access. Also, its configuration registers are a bit different. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Report known silicon revisions for Marvell 88E6131Guenter Roeck1-4/+8
Report known silicon revisions when probing Marvell 88E6131 switches. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Report known silicon revisions for Marvell 88E6060Guenter Roeck1-1/+4
Report known silicon revisions when probing Marvell 88E6060 switches. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29xen-netback: Remove __GFP_COLDZoltan Kiss1-1/+1
This flag is unnecessary, it came from some old code. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29xen-netback: Disable NAPI after disabling interruptsZoltan Kiss1-1/+1
Otherwise the interrupt handler still calls napi_complete. Although it won't schedule NAPI again as either NAPI_STATE_DISABLE or NAPI_STATE_SCHED is set, it is just unnecessary, and it makes more sense to do this way. Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29r8152: support nway_reset of ethtoolhayeswang1-0/+22
Support the nway_reset() function for ethtool. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29r8152: rename tx_underunhayeswang1-2/+2
Replace tx_underun with tx_underrun for checkpatch.pl. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29net: ethernet: realtek: atp: checkpatch errors and warnings correctedRoberto Medina1-119/+127
Several warnings and errors of coding style rules corrected. Compile tested. Signed-off-by: Roberto Medina <robertoxmed@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29gianfar: Implement PAUSE frame generation supportMatei Pavaluca3-2/+93
The hardware can automatically generate pause frames when the number of free buffers drops under a certain threshold, but in order to do this, the address of the last free buffer needs to be written to a specific register for each RX queue. This has to be done in 'gfar_clean_rx_ring' which is called for each RX queue. In order not to impact performance, by adding a register write for each incoming packet, this operation is done only when the PAUSE frame transmission is enabled. Whenever the link is readjusted, this capability is turned on or off. Signed-off-by: Matei Pavaluca <matei.pavaluca@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29Fix the way the local advertising flow options are determinedPavaluca Matei-B466101-1/+5
Local flow control options needed in order to resolve the negotiation are incorrectly calculated. Previously 'mii_advertise_flowctrl' was called to determine the local advertising options, but these were determined based on FLOW_CTRL_RX/TX flags which are never set through ethtool. The patch simply translates from ethtool flow options to mii flow options. Signed-off-by: Pavaluca Matei <matei.pavaluca@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29Add flow control support flags to gianfar's capabilitiesPavaluca Matei-B466102-3/+4
The phy device supports 802.3x flow control, but the specific flags are not set in the phy initialisation code. Flow control flags need to be added to the supported capabilities of the phydev by the driver. This is needed in order for ethtool to work ('ethtool -A' code checks for these flags) Signed-off-by: Pavaluca Matei <matei.pavaluca@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Report actual number of rings in indirection tableAmir Vadai1-0/+1
Hardware requires the number of rings in indirection table to be a power of 2. When setting number of channels to a non power of 2 number, indirection table is using only the closest power of 2 rings. Report this number in 'ethtool -x' and not the total number of rx rings. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Move spinlocks and work initalizations to beginning of init_netdevEugenia Emantayev1-15/+15
Upon failures, destroy_netdev is called, and spinlocks/works must be initialized before calling it. Otherwise kernel panic may occur. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Call napi_synchronize on stop_portIdo Shamay1-2/+1
This is instead of calling the actual implementation of napi_synchronize, for better encapsulation. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Cleanups suggested by clang static checkerJack Morgenstein3-11/+4
clang flagged the following. All are actually cosmetic cleanups, not really bugs: drivers/net/ethernet/mellanox/mlx4/en_main.c:233:3: warning: Value stored to 'err' is never read err = -ENOMEM; ^ ~~~~~~~ drivers/net/ethernet/mellanox/mlx4/en_main.c:293:3: warning: Value stored to 'err' is never read err = -ENOMEM; drivers/net/ethernet/mellanox/mlx4/en_netdev.c:648:16: warning: Assigned value is garbage or undefined entry->reg_id = reg_id; ^ ~~~~~~ drivers/net/ethernet/mellanox/mlx4/en_netdev.c:659:2: warning: Function call argument is an uninitialized value mlx4_en_uc_steer_release(priv, priv->dev->dev_addr, *qpn, reg_id); (NOTE: reg_id is only used in the device-managed flow steering path, in which is it always initialized. This is not a bug. Cleanup here is therefore cosmetic only). drivers/net/ethernet/mellanox/mlx4/en_rx.c:122:3: warning: Value stored to 'frag_info' is never read frag_info = &priv->frag_info[i]; ^ ~~~~~~~~~~~~~~~~~~~ Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ONSaeed Mahameed2-78/+88
Move mlx4_en_reset_config to en_netdev.c as it now serves more general purpose. Add support for turning OFF/ON the rx/tx vlan offlad. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Add support for setting rxvlan offload OFF/ONSaeed Mahameed3-15/+50
Rename mlx4_en_timestamp_config to mlx4_en_reset_config and extend it to support choosing RX vlan offload configuration. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Use PTYS register to set ethtool settings (Speed)Saeed Mahameed1-4/+104
Added Support to set speed or advertised link modes via ethtool: ethtool -s <ifname> [speed <speed>] [advertise <link modes>] Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Use PTYS register to query ethtool settingsSaeed Mahameed4-16/+338
- If dev cap MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL is ON, query PTYS register to fill ethtool settings. else use default values. - Use autoneg port cap and dev backplane autoneg cap to reprort autoneg interface capbilities. - Fix typo in mlx4_en_port_state struct field (transciver to transceiver). Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting supportSaeed Mahameed3-10/+26
Added 100M, 20G and 56G ethtool speed reporting support. Update mlx4_en_test_speed self test with the new speeds. Defined new link speeds in include/uapi/linux/ethtool.h: +#define SPEED_20000 20000 +#define SPEED_40000 40000 +#define SPEED_56000 56000 Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_core: Add ethernet backplane autoneg device capabilitySaeed Mahameed1-1/+6
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev capSaeed Mahameed2-2/+125
Adding ACCESS REG mlx4 command and use it to implement Query method for PTYS (Port Type and Speed Register). Query and store eth_prot_ctrl dev cap. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool supportSaeed Mahameed1-0/+83
Added support for get_module_info/get_module_eeprom ethtool support for cable info reading. Added new cable types enum in include/uapi/linux/ethtool.h for ethtool use. +#define ETH_MODULE_SFF_8636 0x3 +#define ETH_MODULE_SFF_8636_LEN 256 +#define ETH_MODULE_SFF_8436 0x4 +#define ETH_MODULE_SFF_8436_LEN 256 Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_core: Introduce mlx4_get_module_info for cable module info readingSaeed Mahameed1-0/+156
Added new MAD_IFC command to read cable module info with attribute id (0xFF60). Update include/linux/mlx4/device.h with function declaration (mlx4_get_module_info) and the needed defines/enums for future use. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net: phy: Adding SGMII support for Marvell 88ee1145 driverViet Nga Dao1-0/+19
Additional code to m88e1145_config_init function to allow the driver to support SGMII mode. Signed-off-by: Viet Nga Dao <vndao@altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27ethernet: samsung: sxgbe: remove unnecessary checkVarka Bhadram1-3/+0
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27ethernet: renesas: remove unnecessary checkVarka Bhadram1-6/+2
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27ethernet: marvell: remove unnecessary checkVarka Bhadram1-4/+2
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27ethernet: apm: xgene: remove unnecessary checkVarka Bhadram1-12/+0
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27ethernet: wiznet: remove unnecessary checkVarka Bhadram2-8/+4
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26ctcm: replace sscanf by kstrto functionThomas Richter1-4/+4
Since a single integer value is read from the supplied buffer use the kstrto functions instead of sscanf. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26lcs: replace sscanf by kstrto functionThomas Richter1-5/+6
Since a single integer value is read from the supplied buffer use the kstrto functions instead of sscanf. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26qeth: s390 ethernet device driver dependencyThomas Richter1-1/+1
Compile the s390 10GB ethernet device driver only when ETHERNET has been defined in the kernel configuration file. Right now the qeth device driver is always built regardless of which network connectivity is active. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26qeth: make local functions static in qeth_l3 moduleThomas Richter2-8/+4
This patch makes 4 local functions static and removes the prototypes from the header file. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26qeth: fix some trace formating issuesThomas Richter3-5/+5
This patch fixes trace formatting issues using the QETH_CARD_TEXT_ macro. The total size of each trace entry is 8 bytes. Some of the sprintf formats exceed these 8 bytes (for example using abcd:%d and the converted value needs more than 3 bytes). The solution is to shorten the text prepending the value or use a different format (%x). Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26qeth: qeth_core_main make local functions staticThomas Richter2-19/+15
This patch makes some global functions static and removes the prototypes from the header file. Also function qeth_query_card_info is not exported anymore, there is no external user for it, this function should never have been exported in the first place. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26xen-netfront: always keep the Rx ring full of requestsDavid Vrabel1-191/+62
A full Rx ring only requires 1 MiB of memory. This is not enough memory that it is useful to dynamically scale the number of Rx requests in the ring based on traffic rates, because: a) Even the full 1 MiB is a tiny fraction of a typically modern Linux VM (for example, the AWS micro instance still has 1 GiB of memory). b) Netfront would have used up to 1 MiB already even with moderate data rates (there was no adjustment of target based on memory pressure). c) Small VMs are going to typically have one VCPU and hence only one queue. Keeping the ring full of Rx requests handles bursty traffic better than trying to converge on an optimal number of requests to keep filled. On a 4 core host, an iperf -P 64 -t 60 run from dom0 to a 4 VCPU guest improved from 5.1 Gbit/s to 5.6 Gbit/s. Gains with more bursty traffic are expected to be higher. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25sunvnet: Remove irqsave/irqrestore on vio.lockSowmini Varadhan1-25/+5
After the NAPIfication of sunvnet, we no longer need to synchronize by doing irqsave/restore on vio.lock in the I/O fastpath. NAPI ->poll() is non-reentrant, so all RX processing occurs strictly in a serialized environment. TX reclaim is done in NAPI context, so the netif_tx_lock can be used to serialize critical sections between Tx and Rx paths. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25sunvnet: Use RCU to synchronize port usage with vnet_port_remove()Sowmini Varadhan1-29/+33
A vnet_port_remove could be triggered as a result of an ldm-unbind operation by the peer, module unload, or other changes to the inter-vnet-link configuration. When this is concurrent with vnet_start_xmit(), there are several race sequences possible, such as thread 1 thread 2 vnet_start_xmit -> tx_port_find spin_lock_irqsave(&vp->lock..) ret = __tx_port_find(..) spin_lock_irqrestore(&vp->lock..) vio_remove -> .. ->vnet_port_remove spin_lock_irqsave(&vp->lock..) cleanup spin_lock_irqrestore(&vp->lock..) kfree(port) /* attempt to use ret will bomb */ This patch adds RCU locking for port access so that vnet_port_remove will correctly clean up port-related state. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Dwight Engen <dwight.engen@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25sunvnet: NAPIfy sunvnetSowmini Varadhan2-44/+135
Move Rx packet procssing to the NAPI poll callback. Disable VIO interrupt and unconditioanlly go into NAPI context from vnet_event. Note that we want to minimize the number of LDC STOP/START messages sent. Specifically, do not send a STOP message if vnet_walk_rx does not read all the available descriptors because of the NAPI budget limitation. Instead, note the end index as part of port state, and resume from this index when the next poll callback is triggered. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Raghuram Kothakota <raghuram.kothakota@oracle.com> Acked-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24Merge branch 'master' of ↵David S. Miller9-2185/+2268
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-10-23 This series contains updates to i40e and i40evf. Jesse modifies the i40e driver to only notify the firmware on link up/down and qualified module events. Also simplified the job of managing link state by using the admin queue receive event for link events as a signal to tell the driver to update link state. Jeff (me) cleans up the inconsistent use of tabs for indentation in the admin queue command header file. Neerav converts the use of udelay() to usleep_range(). Anjali fixes a bug where receive would stop after some stress by adding a sleep and restart as well as moving the setting of flow control because it should be done at a PF level and not a VSI level. Mitch adds code to handle link events when updating the PF switch, which allows link information to be properly provided to VFS in all cases. Catherine adds driver support for 10GBaseT and bumps driver version. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24net: pxa168_eth: Remove in-driver PHY manglingSebastian Hesselbarth1-126/+0
With properly using libphy PHYs now, remove the in-driver PHY mangling. Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24net: pxa168_eth: Remove HW auto-negotiaionSebastian Hesselbarth1-15/+85
Marvell Ethernet IP supports PHY negotiation driven by HW. This fundamentally clashes with libphy (software) driven negotiation and also cannot cope with quirky PHYs. Therefore, always disable any HW negotiation features and properly use libphy's phy_device. Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24net: pxa168_eth: Prepare proper libphy handlingSebastian Hesselbarth1-15/+23
Current libphy handling in pxa168_eth lacks proper phy_connect. Prepare to fix this by first moving phy properties from platform_data to private driver data. Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24phy: marvell: Add support for 88E3016 FastEthernet PHYSebastian Hesselbarth1-0/+46
Marvell 88E3016 is a FastEthernet PHY that also can be found in Marvell Berlin SoCs as integrated PHY. Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24natsemi/macsonic: Remove superfluous interrupt disable/restoreGeert Uytterhoeven1-4/+0
As of commit e4dc601bf99ccd1c ("m68k: Disable/restore interrupts in hwreg_present()/hwreg_write()"), this is no longer needed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24cirrus/mac89x0: Remove superfluous interrupt disable/restoreGeert Uytterhoeven1-6/+2
As of commit e4dc601bf99ccd1c ("m68k: Disable/restore interrupts in hwreg_present()/hwreg_write()"), this is no longer needed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 22:32:30 +0000