summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2015-03-27USB: f81232: clarify f81232_ioctl() and fixPeter Hung1-11/+19
We extract TIOCGSERIAL section in f81232_ioctl() to f81232_get_serial_info() to make it clarify. Also we fix device type from 16654 to 16550A, and set it's baud_base to 115200 (1.8432MHz/16). Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-27USB: f81232: implement set_termios()Peter Hung1-4/+108
The original driver had do not any h/w change in driver. This patch implements with configure H/W for baud/parity/word length/stop bits functional in f81232_set_termios(). This patch also implement DTR/RTS control when baudrate B0. We drop DTR/RTS when B0, otherwise enable it. We are checking baudrate in set_termios() too, If baudrate larger then 115200, it will be changed to 115200 and use tty_encode_baud_rate() to encode into tty Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-27USB: f81232: implement port enable/disable methodPeter Hung1-0/+49
We put FCR/IER initial step to f81232_port_enable()/f81232_port_disable(). When port is open, it set MSR interrupt on. Otherwise set it off. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-27USB: f81232: implement MCR/MSR functionPeter Hung1-22/+117
This patch implement relative MCR/MSR function, such like tiocmget()/tiocmset()/dtr_rts()/carrier_raised() original f81232_carrier_raised() compared with wrong value UART_DCD. It's should compared with UART_MSR_DCD. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-27USB: f81232: implement read IIR/MSR with endpointPeter Hung1-8/+118
The interrupt endpoint will report current IIR. If we got IIR with MSR changed , We will do read MSR with interrupt_work worker to do f81232_read_msr() function. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-27USB: f81232: change lock mechanismPeter Hung1-6/+5
The original driver lock with spin_lock_irqsave()/spin_unlock_irqrestore() because of it's maybe used in interrupt context f81232_process_read_urb(). We had remove it from previous patch "implement RX bulk-in EP", so we can change it from busying loop spin_lock to sleepable mutex_lock. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-27USB: f81232: implement RX bulk-in EPPeter Hung1-34/+41
The F81232 bulk-in is RX data + LSR channel, data format is [LSR+Data][LSR+Data]..... , We had implemented in f81232_process_read_urb(). Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> [johan: reword comment in process_read_urb ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-27USB: f81232: rename private struct member namePeter Hung1-4/+4
Change private struct member name from line_status to modem_status. It will store MSR for some functions used Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: ch341: remove redundant close from open error pathJohan Hovold1-1/+0
Remove redundant call to ch341_close from error path when submission of the interrupt urb fails in open. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds4-21/+21
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-2/+2
Pull networking updates from David Miller: 1) Missing netlink attribute validation in nft_lookup, from Patrick McHardy. 2) Restrict ipv6 partial checksum handling to UDP, since that's the only case it works for. From Vlad Yasevich. 3) Clear out silly device table sentinal macros used by SSB and BCMA drivers. From Joe Perches. 4) Make sure the remote checksum code never creates a situation where the remote checksum is applied yet the tunneling metadata describing the remote checksum transformation is still present. Otherwise an external entity might see this and apply the checksum again. From Tom Herbert. 5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire. 6) Don't explicitly initialize timer struct fields, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi Nomura. 8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet. 9) Don't potentially perform skb_get() on shared skbs, also from Eric Dumazet. 10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin KaFai Lau. 11) Fix merge resolution error between the iov_iter changes in vhost and some bug fixes that occurred at the same time. From Jason Wang. 12) If rtnl_configure_link() fails we have to perform a call to ->dellink() before unregistering the device. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits) net: dsa: Set valid phy interface type rtnetlink: call ->dellink on failure when ->newlink exists com20020-pci: add support for eae single card vhost_net: fix wrong iter offset when setting number of buffers net: spelling fixes net/core: Fix warning while make xmldocs caused by dev.c net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081 ipv6: fix ipv6_cow_metrics for non DST_HOST case openvswitch: Fix key serialization. r8152: restore hw settings hso: fix rx parsing logic when skb allocation fails tcp: make sure skb is not shared before using skb_get() bridge: netfilter: Move sysctl-specific error code inside #ifdef ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc ipvlan: add a missing __percpu pcpu_stats tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one() bgmac: fix device initialization on Northstar SoCs (condition typo) qlcnic: Delete existing multicast MAC list before adding new net/mlx5_core: Fix configuration of log_uar_page_sz sunvnet: don't change gso data on clones ...
2015-02-17Merge branch 'debugfs_automount' of ↵Linus Torvalds1-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull debugfs patches from Al Viro: "debugfs patches, mostly to make it possible for something like tracefs to be transparently automounted on given directory in debugfs. New primitive in there is debugfs_create_automount(name, parent, func, arg), which creates a directory and makes its ->d_automount() return func(arg). Another missing primitive was debugfs_create_file_size() - open-coded in quite a few places. Dave's patch adds it and converts the open-code instances to calling it" * 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: debugfs: Provide a file creation function that also takes an initial size new primitive: debugfs_create_automount() debugfs: split end_creating() into success and failure cases debugfs: take mode-dependent parts of debugfs_get_inode() into callers fold debugfs_mknod() into callers fold debugfs_create() into caller fold debugfs_mkdir() into caller debugfs_mknod(): get rid useless arguments fold debugfs_link() into caller debugfs: kill __create_file() debugfs: split the beginning and the end of __create_file() off debugfs_{mkdir,create,link}(): get rid of redundant argument
2015-02-17Merge tag 'drivers-for-linus' of ↵Linus Torvalds3-254/+281
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. This time around, much of this is for at91, with the bulk of it being syscon and udc drivers. Also, there's: - coupled cpuidle support for Samsung Exynos4210 - Renesas 73A0 common-clk work - of/platform changes to tear down DMA mappings on device destruction - a few updates to the TI Keystone knav code" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) cpuidle: exynos: add coupled cpuidle support for exynos4210 ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM soc: ti: knav_qmss_queue: export API calls for use by user driver of/platform: teardown DMA mappings on device destruction usb: gadget: at91_udc: Allocate udc instance usb: gadget: at91_udc: Update DT binding documentation usb: gadget: at91_udc: Rework for multi-platform kernel support usb: gadget: at91_udc: Simplify probe and remove functions usb: gadget: at91_udc: Remove non-DT handling code usb: gadget: at91_udc: Document DT clocks and clock-names property usb: gadget: at91_udc: Drop uclk clock usb: gadget: at91_udc: Fix clock names mfd: syscon: Add Atmel SMC binding doc mfd: syscon: Add atmel-smc registers definition mfd: syscon: Add Atmel Matrix bus DT binding documentation mfd: syscon: Add atmel-matrix registers definition clk: shmobile: fix sparse NULL pointer warning ...
2015-02-17debugfs: Provide a file creation function that also takes an initial sizeDavid Howells1-6/+9
Provide a file creation function that also takes an initial size so that the caller doesn't have to set i_size, thus meaning that we don't have to call deal with ->d_inode in the callers. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-15Merge tag 'usb-3.20-rc1' of ↵Linus Torvalds147-2796/+7737
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ...
2015-02-13usb: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo4-16/+8
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. * drivers/uwb/drp.c::uwb_drp_handle_alien_drp() was formatting mas.bm into a buffer but never used it. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11treewide: Remove unnecessary SSB_DEVTABLE_END macroJoe Perches1-1/+1
Use the normal {} instead of a macro to terminate an array. Remove the macro too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11treewide: Remove unnecessary BCMA_CORETABLE_END macroJoe Perches1-1/+1
Use the normal {} instead of a macro to terminate an array. Remove the macro too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11xilinx usb2 gadget: get rid of incredibly annoying compile warningLinus Torvalds1-2/+2
This one was driving me mad, with several lines of warnings during the allmodconfig build for a single bogus pointer cast. The warning was so verbose due to the indirect macro expansion explanation, and the whole thing was just for a debug printout. The bogus pointer-to-integer cast was pointless anyway, so just remove it, and use '%p' to show the pointer. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-08USB / PM: Remove unneeded #ifdef and associated dead codeAndreas Ruprecht1-12/+0
In commit ceb6c9c862c8 ("USB / PM: Drop CONFIG_PM_RUNTIME from the USB core"), all occurrences of CONFIG_PM_RUNTIME in the USB core code were replaced by CONFIG_PM. This created the following structure of #ifdef blocks in drivers/usb/core/hub.c: [...] #ifdef CONFIG_PM #ifdef CONFIG_PM /* always on / undead */ #else /* dead */ #endif [...] This patch removes unnecessary inner "#ifdef CONFIG_PM" as well as the corresponding dead #else block. This inconsistency was found using the undertaker-checkpatch tool. Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-04Merge tag 'usb-for-v3.20' of ↵Greg Kroah-Hartman85-2213/+7085
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.20 merge window Here's the big pull request for Gadgets and PHYs. It's a total of 217 non-merge commits with pretty much everything being touched. The most important bits are a ton of new documentation for almost all usb gadget functions, a new isp1760 UDC driver, several improvements to the old net2280 UDC driver, and some minor tracepoint improvements to dwc3. Other than that, a big list of minor cleanups, smaller bugfixes and new features all over the place. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-04usb: musb: fix device hotplug behind hubBin Liu2-1/+7
The commit 889ad3b "usb: musb: try a race-free wakeup" breaks device hotplug enumeraitonn when the device is connected behind a hub while usb autosuspend is enabled. Adding finish_resume_work into runtime resume callback fixes the issue. Also resume root hub is required to resume the bus from runtime suspend, so move musb_host_resume_root_hub() back to its original location, where handles RESUME interrupt. Signed-off-by: Bin Liu <b-liu@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-04usb: dwc2: Fix a bug in reading the endpoint directions from reg.Roshan Pius1-1/+1
According to the DWC2 datasheet, the HWCFG1 register stores the configured endpoint directions for endpoints 0-15 in bit positions 0-31. ========================== Endpoint Direction (EpDir) This 32-bit field uses two bits per endpoint to determine the endpoint direction. Endpoint Bits [31:30]: Endpoint 15 direction Bits [29:28]: Endpoint 14 direction .... Bits [3:2]: Endpoint 1 direction Bits[1:0]: Endpoint 0 direction (always BIDIR) ========================== The DWC2 driver is currently interpreting the contents of the register as directions for endpoints 1-15 which leads to an error in determining the configured endpoint directions in the core because the first 2 bits determine the direction of endpoint 0 and not 1. This is based on testing/next branch in Felipe's git. Signed-off-by: Roshan Pius <rpius@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-03usb: Retry port status check on resume to work around RH bugsJulius Werner1-3/+12
The EHCI controller on the RK3288 SoC is violating basic parts of the USB spec and thereby unable to properly resume a suspended port. It does not start SOF generation within 3ms of finishing resume signaling, so the attached device will drop of the bus again. This is a particular problem with runtime PM, where accessing the device will trigger a resume that immediately makes it unavailable (and reenumerate with a new handle). Thankfully, the persist feature is generally able to work around stuff like that. Unfortunately, it doesn't quite work in this particular case because the controller will turn off the CurrentConnectStatus bit for an instant while the device is reconnecting, which causes the kernel to conclude that it permanently disappeared. This patch adds a tiny retry mechanism to the core port resume code which will catch this case and shouldn't have any notable impact on other controllers. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03Revert "usb: Reset USB-3 devices on USB-3 link bounce"Zhuang Jin Can1-25/+9
This revert a82b76f7fa6154e8ab2d8071842a3e38b9c0d0ff. The commit causes an extra reset in remote wakeup as described in: http://www.spinics.net/lists/linux-usb/msg119080.html Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03uhci-hub: use HUB_CHAR_*Sergei Shtylyov1-2/+3
Fix using the bare number to set the 'wHubCharacteristics' field of the Hub Descriptor while the values are #define'd in <linux/usb/ch11.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03usb: kconfig: replace PPC_OF with PPCKevin Hao1-4/+4
The PPC_OF is a ppc specific option which is used to mean that the firmware device tree access functions are available. Since all the ppc platforms have a device tree, it is aways set to 'y' for ppc. So it makes no sense to keep a such option in the current kernel. Replace it with PPC Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03ehci-pci: disable for Intel MID platforms (update)Andy Shevchenko2-6/+13
This is a follow up to the previously submitted commit cefa9a31a5f0 (ehci-pci: disable for Intel MID platforms). It includes the following changes: - table and function are renamed to reflect this is not only about ChipIdea - ChipIdea PCI driver (ci_hdrc_pci.c) gets the comment about the table in ehci-pci.c - MIPS IDs removed from the list since it was discovered and tested on Intel MID platforms Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02usb: gadget: Kconfig: use bool instead of booleanChristoph Jaeger1-1/+1
Keyword 'boolean' for type definition attributes is considered deprecated and, therefore, should not be used anymore. See http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com See http://lkml.kernel.org/r/1419108071-11607-1-git-send-email-cj@linux.com Signed-off-by: Christoph Jaeger <cj@linux.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-02usb: musb: blackfin: remove incorrect __exit_p()Dmitry Torokhov1-1/+1
bfin_remove() is not (nor should it be) marked as __exit, so we should not be using __exit_p() wrapper with it, otherwise unbinding through sysfs does not work properly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-02Merge 3.19-rc7 into usb-nextGreg Kroah-Hartman6-5/+28
We want the USB fixes in here to make merges easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-31USB: fix use-after-free bug in usb_hcd_unlink_urb()Alan Stern1-8/+8
The usb_hcd_unlink_urb() routine in hcd.c contains two possible use-after-free errors. The dev_dbg() statement at the end of the routine dereferences urb and urb->dev even though both structures may have been deallocated. This patch fixes the problem by storing urb->dev in a local variable (avoiding the dereference of urb) and moving the dev_dbg() up before the usb_put_dev() call. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31ehci-pci: disable for Intel MID platformsAndy Shevchenko1-1/+22
On some Intel MID platforms the ChipIdea USB controller is used. The EHCI PCI is in conflict with the proper driver. The patch makes ehci-pci to be ignored in favour of ChipIdea controller. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31usb: host: pci_quirks: joing string literalsAndy Shevchenko1-21/+25
The patch joins the string literals for happy debugging. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)Alan Stern2-0/+15
Currently the USB stack assumes that all host controller drivers are capable of receiving wakeup requests from downstream devices. However, this isn't true for the isp1760-hcd driver, which means that it isn't safe to do a runtime suspend of any device attached to a root-hub port if the device requires wakeup. This patch adds a "cant_recv_wakeups" flag to the usb_hcd structure and sets the flag in isp1760-hcd. The core is modified to prevent a direct child of the root hub from being put into runtime suspend with wakeup enabled if the flag is set. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Nicolas Pitre <nico@linaro.org> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31USB: usbfs: allow URBs to be reaped after disconnectionAlan Stern1-26/+37
The usbfs API has a peculiar hole: Users are not allowed to reap their URBs after the device has been disconnected. There doesn't seem to be any good reason for this; it is an ad-hoc inconsistency. The patch allows users to issue the USBDEVFS_REAPURB and USBDEVFS_REAPURBNDELAY ioctls (together with their 32-bit counterparts on 64-bit systems) even after the device is gone. If no URBs are pending for a disconnected device then the ioctls will return -ENODEV rather than -EAGAIN, because obviously no new URBs will ever be able to complete. The patch also adds a new capability flag for USBDEVFS_GET_CAPABILITIES to indicate that the reap-after-disconnect feature is supported. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Chris Dickens <christopher.a.dickens@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31cdc-acm: kill unnecessary messagesOliver Neukum1-24/+9
Memory allocation failures are reported by a central facility. No need to repeat the job. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-31cdc-acm: add sanity checksOliver Neukum1-5/+16
Check the special CDC headers for a plausible minimum length. Another big operating systems ignores such garbage. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Reviewed-by: Adam Lee <adam8157@gmail.com> Tested-by: Adam Lee <adam8157@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-30Merge tag 'usb-serial-3.19-rc7' of ↵Greg Kroah-Hartman1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next USB-serial fixes for v3.19-rc7 Just another device id for cp210x. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-30Merge tag 'usb-serial-3.20-rc1' of ↵Greg Kroah-Hartman2-106/+14
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v3.20-rc1 Removal of dead code in mos7840 and a clean-up of the option blacklist handling. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-30usb: phy: phy-generic: Fix USB PHY gpio resetFabio Estevam1-4/+5
Since commit e9f2cefb0cdc2ae ("usb: phy: generic: migrate to gpio_desc") a kernel hang is observed on imx51-babbage board: [ 1.392824] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.397975] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.403205] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.422335] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.432962] hub 1-0:1.0: USB hub found [ 1.437119] hub 1-0:1.0: 1 port detected This hang happens because the reset GPIO stays at logic level 0. The USB PHY reset gpio is defined in the dts file as: reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; , which means it is active low, so what the gpio reset pin needs to do in this case is the following: - Go to logic level 0 to reset the USB PHY - Stay at 0 for a bit - Go back to logic level 1 When switching to gpiod API we need to following according to Documentation/gpio/consumer.txt: "The first thing a driver must do with a GPIO is setting its direction. If no direction-setting flags have been given to gpiod_get*(), this is done by invoking one of the gpiod_direction_*() functions: int gpiod_direction_input(struct gpio_desc *desc) int gpiod_direction_output(struct gpio_desc *desc, int value)" Since no direction-setting flags have been given to devm_gpiod_get_optional() in our case, we need to use gpiod_direction_output to comply with the gpiod API. With this change the USB PHY reset performs a proper reset, the kernel boots fine and USB host is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: fix USB core dependenciesArnd Bergmann1-2/+2
It is currently possible to configure the dwc2 driver as built-in when host mode or dual-role is enabled, but the USB core is a loadable module. This leads to a link failure: drivers/built-in.o: In function `_dwc2_hcd_start': :(.text+0x84538): undefined reference to `usb_hcd_resume_root_hub' drivers/built-in.o: In function `_dwc2_hcd_urb_dequeue': :(.text+0x84aa0): undefined reference to `usb_hcd_check_unlink_urb' :(.text+0x84e4c): undefined reference to `usb_hcd_unlink_urb_from_ep' :(.text+0x84e74): undefined reference to `usb_hcd_giveback_urb' drivers/built-in.o: In function `dwc2_assign_and_init_hc': :(.text+0x86b98): undefined reference to `usb_hcd_unmap_urb_for_dma' drivers/built-in.o: In function `_dwc2_hcd_urb_enqueue': :(.text+0x8717c): undefined reference to `usb_hcd_link_urb_to_ep' :(.text+0x872f4): undefined reference to `usb_hcd_unlink_urb_from_ep' drivers/built-in.o: In function `dwc2_host_complete': :(.text+0x875d4): undefined reference to `usb_hcd_unlink_urb_from_ep' :(.text+0x87600): undefined reference to `usb_hcd_giveback_urb' drivers/built-in.o: In function `dwc2_hcd_init': :(.text+0x87ba8): undefined reference to `usb_disabled' :(.text+0x87d38): undefined reference to `usb_create_hcd' :(.text+0x88094): undefined reference to `usb_add_hcd' :(.text+0x880dc): undefined reference to `usb_put_hcd' drivers/built-in.o: In function `dwc2_hcd_remove': :(.text+0x8821c): undefined reference to `usb_remove_hcd' :(.text+0x8823c): undefined reference to `usb_put_hcd' drivers/built-in.o: In function `dwc2_hc_handle_tt_clear.isra.10': :(.text+0x88e2c): undefined reference to `usb_hub_clear_tt_buffer' drivers/built-in.o: In function `dwc2_hcd_qtd_add': :(.text+0x8b554): undefined reference to `usb_calc_bus_time' To fix the problem, this patch changes the dependencies so that dwc2 host mode can only be enabled if either the USB core is built-in or both USB and dwc2 are modules. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel()Yoshihiro Shimoda1-0/+4
This patch fixes an issue that the following commit causes NULL pointer dereference in dma_release_channel(). "usb: renesas_usbhs: add support for requesting DT DMA" (commit id abd2dbf6bb1b5f3a03a8c76b1a8879da1dd30caa) The usbhsf_dma_init_dt() should set fifo->{t,r}x_chan to NULL if dma_request_slave_channel_reason() returns IS_ERR value. Otherwise, usbhsf_dma_quit() will call dma_release_channel(), and then NULL pointer dereference happens. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: phy: generic: fix the vbus interrupt requestRobert Jarzmik1-1/+2
Declare the interrupt as "one shot" so that it is masked until the end of the threaded handler. This prevents the irq core from spitting out an error : "Threaded irq requested with handler=NULL and !ONESHOT for irq 63" This was introduced by commit "usb: phy: generic: add vbus support". Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: phy: generic: fix the gpios to be optionalRobert Jarzmik1-5/+7
All the gpios, ie. reset-gpios and vbus-detect-gpio, should be optional and not prevent the driver from working. Fix the regression in the behavior introduced by commit "usb: phy: generic: migrate to gpio_desc". Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: initialize controller in pullup callbackGregory Herrero1-0/+1
USB reset interrupt is no more used to reset the controller. Thus, reset the controller in pullup callback as described by Synopsys programming guide. Otherwise enumeration sometimes fails when usb configuration is switched without physical disconnection. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: replace constants with definesMian Yousaf Kaukab2-12/+13
Defines are more readable and searchable than constants. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix phy interface configurationMian Yousaf Kaukab1-3/+7
hsotg->phyif is set in dwc2_gadget_init according to phy interface width. Use it for configuration instead of hardcoded value. Moreover, set USB turnaround time according to phy width. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix debug message for zlpMian Yousaf Kaukab1-1/+6
Print debug message according to zlp direction. Always saying "Sending" is misleading. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: don't modify pullup status during resetGregory Herrero1-1/+0
Pullup doesn't need to be enabled during usb reset since it is already enabled. This leads to shorter chirp-k duration if done during usb reset. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 12:46:03 +0000