summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2015-04-07tracing: Add TRACE_SYSTEM_VAR to xhci-hcdSteven Rostedt (Red Hat)1-0/+7
New code will require TRACE_SYSTEM to be a valid C variable name, but some tracepoints have TRACE_SYSTEM with '-' and not '_', so it can not be used. Instead, add a TRACE_SYSTEM_VAR that can give the tracing infrastructure a unique name for the trace system. Cc: Xenia Ragiadakou <burzalodowa@gmail.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-13Merge branch 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-398/+272
Pull gadgetfs fixes from Al Viro: "Assorted fixes around AIO on gadgetfs: leaks, use-after-free, troubles caused by ->f_op flipping" * 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: gadgetfs: really get rid of switching ->f_op gadgetfs: get rid of flipping ->f_op in ep_config() gadget: switch ep_io_operations to ->read_iter/->write_iter gadgetfs: use-after-free in ->aio_read() gadget/function/f_fs.c: switch to ->{read,write}_iter() gadget/function/f_fs.c: use put iov_iter into io_data gadget/function/f_fs.c: close leaks move iov_iter.c from mm/ to lib/ new helper: dup_iter()
2015-03-08Merge tag 'usb-4.0-rc3' of ↵Linus Torvalds33-107/+373
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here's a round of USB fixes for 4.0-rc3. Nothing major, the usual gadget, xhci and usb-serial fixes and a few new device ids as well. All have been in linux-next successfully" * tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits) xhci: Workaround for PME stuck issues in Intel xhci xhci: fix reporting of 0-sized URBs in control endpoint usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards USB: ch341: set tty baud speed according to tty struct USB: serial: cp210x: Adding Seletek device id's USB: pl2303: disable break on shutdown USB: mxuport: fix null deref when used as a console USB: serial: clean up bus probe error handling USB: serial: fix port attribute-creation race USB: serial: fix tty-device error handling at probe USB: serial: fix potential use-after-free after failed probe USB: console: add dummy __module_get USB: ftdi_sio: add PIDs for Actisense USB devices Revert "USB: serial: make bulk_out_size a lower limit" cdc-acm: Add support for Denso cradle CU-321 usb-storage: support for more than 8 LUNs uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539 USB: usbfs: don't leak kernel data in siginfo xhci: Clear the host side toggle manually when endpoint is 'soft reset' xhci: Allocate correct amount of scratchpad buffers ...
2015-03-08gadgetfs: really get rid of switching ->f_opAlan Stern1-19/+19
... for ep0 as well Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-08gadgetfs: get rid of flipping ->f_op in ep_config()Al Viro1-53/+37
Final methods start with get_ready_ep(), which will fail unless we have ->state == STATE_EP_ENABLED. So they'd be failing just fine until that first write() anyway. Let's do the following: * get_ready_ep() gets a new argument - true when called from ep_write_iter(), false otherwise. * make it quiet when it finds STATE_EP_READY (no printk, that is; the case won't be impossible after that change). * when that new argument is true, treat STATE_EP_READY the same way as STATE_EP_ENABLED (i.e. return zero and do not unlock). * in ep_write_iter(), after success of get_ready_ep() turn if (!usb_endpoint_dir_in(&epdata->desc)) { into if (epdata->state == STATE_EP_ENABLED && !usb_endpoint_dir_in(&epdata->desc)) { - that logics only applies after config. * have ep_config() take kernel-side buffer (i.e. use memcpy() instead of copy_from_user() in there) and in the "let's call ep_io or ep_aio" (again, in ep_write_iter()) add "... or ep_config() in case it's not configured yet" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-07USB: serial: fix infinite wait_until_sent timeoutJohan Hovold1-2/+3
Make sure to handle an infinite timeout (0). Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: dcf010503966 ("USB: serial: add generic wait_until_sent implementation") Cc: stable <stable@vger.kernel.org> # v3.10 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06xhci: Workaround for PME stuck issues in Intel xhciMathias Nyman2-0/+31
The xhci in Intel Sunrisepoint and Cherryview platforms need a driver workaround for a Stuck PME that might either block PME events in suspend, or create spurious PME events preventing runtime suspend. Workaround is to clear a internal PME flag, BIT(28) in a vendor specific PMCTRL register at offset 0x80a4, in both suspend resume callbacks Without this, xhci connected usb devices might never be able to wake up the system from suspend, or prevent device from going to suspend (xhci d3) Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06xhci: fix reporting of 0-sized URBs in control endpointAleksander Morgado2-2/+11
When a control transfer has a short data stage, the xHCI controller generates two transfer events: a COMP_SHORT_TX event that specifies the untransferred amount, and a COMP_SUCCESS event. But when the data stage is not short, only the COMP_SUCCESS event occurs. Therefore, xhci-hcd must set urb->actual_length to urb->transfer_buffer_length while processing the COMP_SUCCESS event, unless urb->actual_length was set already by a previous COMP_SHORT_TX event. The driver checks this by seeing whether urb->actual_length == 0, but this alone is the wrong test, as it is entirely possible for a short transfer to have an urb->actual_length = 0. This patch changes the xhci driver to rely on a new td->urb_length_set flag, which is set to true when a COMP_SHORT_TX event is received and the URB length updated at that stage. This fixes a bug which affected the HSO plugin, which relies on URBs with urb->actual_length == 0 to halt re-submitting the RX URB in the control endpoint. Cc: <stable@vger.kernel.org> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-05Merge tag 'usb-serial-4.0-rc3' of ↵Greg Kroah-Hartman9-43/+105
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.0-rc3 Here are a few fixes for reported problems including a usb-debug device buffer overflow, potential use-after-free on failed probe, and a couple of issues with the USB console. Some new device IDs are also added. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-03usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boardsMax Mansfield2-0/+5
This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by: Max Mansfield <max.m.mansfield@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-02USB: ch341: set tty baud speed according to tty structNicolas PLANEL1-9/+6
The ch341_set_baudrate() function initialize the device baud speed according to the value on priv->baud_rate. By default the ch341_open() set it to a hardcoded value (DEFAULT_BAUD_RATE 9600). Unfortunately, the tty_struct is not initialized with the same default value. (usually 56700) This means that the tty_struct and the device baud rate generator are not synchronized after opening the port. Fixup is done by calling ch341_set_termios() if tty exist. Remove unnecessary variable priv->baud_rate setup as it's already done by ch341_port_probe(). Remove unnecessary call to ch341_set_{handshake,baudrate}() in ch341_open() as there already called in ch341_configure() and ch341_set_termios() Signed-off-by: Nicolas PLANEL <nicolas.planel@enovance.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-27USB: serial: cp210x: Adding Seletek device id'sMichiel vd Garde1-0/+2
These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by: Michiel van de Garde <mgparser@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: pl2303: disable break on shutdownJohan Hovold1-5/+13
Currently an enabled break state is not disabled on final close nor on re-open and has to be disabled manually. Fix this by disabling break on port shutdown. Reported-by: Jari Ruusu <jariruusu@users.sourceforge.net> Tested-by: Jari Ruusu <jariruusu@users.sourceforge.net> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: mxuport: fix null deref when used as a consoleJohan Hovold1-1/+2
Fix null-pointer dereference at probe when the device is used as a console, in which case the tty argument to open will be NULL. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable <stable@vger.kernel.org> # v3.14 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: clean up bus probe error handlingJohan Hovold1-11/+14
Clean up bus probe error handling by separating success and error paths. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: serial: fix port attribute-creation raceJohan Hovold2-19/+16
Fix attribute-creation race with userspace by using the port device groups field to create the port attributes. Also use %u when printing the port number, which is unsigned, even though we do not currently support more than 128 ports per device. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix tty-device error handling at probeJohan Hovold1-1/+10
Add missing error handling when registering the tty device at port probe. This avoids trying to remove an uninitialised character device when the port device is removed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Takashi Iwai <tiwai@suse.de> Cc: stable <stable@vger.kernel.org> # v2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix potential use-after-free after failed probeJohan Hovold1-1/+1
Fix return value in probe error path, which could end up returning success (0) on errors. This could in turn lead to use-after-free or double free (e.g. in port_remove) when the port device is removed. Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove at the right times") Cc: stable <stable@vger.kernel.org> # v2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: console: add dummy __module_getJohan Hovold1-0/+2
Add call to __module_get when initialising the fake tty in usb_console_setup to match the module_put in release_one_tty. Note that the tty-driver (i.e. usb-serial core) must be compiled-in to enable the usb console so the __module_get is essentially a noop as driver->owner will be null. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: ftdi_sio: add PIDs for Actisense USB devicesMark Glover2-0/+37
These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover <mark@actisense.com> Cc: stable <stable@vger.kernel.org> [johan: edit commit message slightly ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26Revert "USB: serial: make bulk_out_size a lower limit"Johan Hovold1-2/+3
This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" <elvin.li@intel.com> Cc: stable <stable@vger.kernel.org> # v3.15 Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-24cdc-acm: Add support for Denso cradle CU-321Björn Gerhart1-0/+2
In order to support an older USB cradle by Denso, I added its vendor- and product-ID to the array of usb_device_id acm_ids. In this way cdc-acm feels responsible for this cradle. The related /dev/ttyACM node is being created properly, and the data transfer works. However, later cradle models by Denso do have proper descriptors, so the patch is not required for these. At the same time both the older and the later model have the same vendor- and product-ID, but they both work with the patched driver. Declaration of the Denso cradles I tested: - both models have the same IDs: vendorID 0x076d, productID 0x0006 - older model: Denso CU-321 (descriptors not properly set) - later model: Denso CU-821 (with proper descriptors) Signed-off-by: Bjoern Gerhart <oss@airbjorn.de> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-24usb-storage: support for more than 8 LUNsOliver Neukum1-0/+6
This is necessary to make some storage arrays work. Some storage devices have more than 8 LUNs. In addition you can hook up a WideSCSI bus to USB. In these cases even level 2 devices can have more than 8 LUNs. For them it is necessary to simply believe the class specific command and report its result back to the SCSI layer. Off by one Alan noticed is fixed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-24uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539Hans de Goede1-0/+7
Like the JMicron JMS567 enclosures with the JMS539 choke on report-opcodes, so avoid it. Tested-and-reported-by: Tom Arild Naess <tanaess@gmail.com> Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-24USB: usbfs: don't leak kernel data in siginfoAlan Stern1-0/+2
When a signal is delivered, the information in the siginfo structure is copied to userspace. Good security practice dicatates that the unused fields in this structure should be initialized to 0 so that random kernel stack data isn't exposed to the user. This patch adds such an initialization to the two places where usbfs raises signals. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Dave Mielke <dave@mielke.cc> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-24xhci: Clear the host side toggle manually when endpoint is 'soft reset'Mathias Nyman3-10/+94
Main benefit of this is to get xhci connected USB scanners to work. Some devices use a clear endpoint halt request as a 'soft reset' even if the endpoint is not halted. This will clear the toggle and sequence on the device side. xHCI however refuses to reset a non-halted endpoint, so instead we need to issue a configure endpoint command on xHCI to clear its host side toggle and sequence, and get it in sync with the device side. Tested-by: Mike Mammarella <mikem@crystalorb.net> Cc: <stable@vger.kernel.org> # v3.18 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-24xhci: Allocate correct amount of scratchpad buffersMathias Nyman1-2/+3
Include the high order bit fields for Max scratchpad buffers when calculating how many scratchpad buffers are needed. I'm suprised this hasn't caused more issues, we never allocated more than 32 buffers even if xhci needed more. Either we got lucky and xhci never really used past that area, or then we got enough zeroed dma memory anyway. Should be backported as far back as possible Reported-by: Tim Chen <tim.c.chen@linux.intel.com> Tested-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-24usb: XHCI: platform: Move the Marvell quirks after the enabling the clocksMaxime Ripard1-10/+9
The commit 973747928514 ("usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers") extended the xhci-plat driver to support the Armada 375/38x SoCs, mostly by adding a quirk configuring the MBUS window. However, that quirk was run before the clock the controllers needs has been enabled. This usually worked because the clock was first enabled by the bootloader, and left as such until the driver is probe, where it tries to access the MBUS configuration registers before enabling the clock. Things get messy when EPROBE_DEFER is involved during the probe, since as part of its error path, the driver will rightfully disable the clock. When the driver will be reprobed, it will retry to access the MBUS registers, but this time with the clock disabled, which hangs forever. Fix this by running the quirks after the clock has been enabled by the driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-23usb: gadget: configfs: don't NUL-terminate (sub)compatible idsAndrzej Pietrasiewicz1-2/+0
The "Extended Compat ID OS Feature Descriptor Specification" does not require the (sub)compatible ids to be NUL-terminated, because they are placed in a fixed-size buffer and only unused parts of it should contain NULs. If the buffer is fully utilized, there is no place for NULs. Consequently, the code which uses desc->ext_compat_id never expects the data contained to be NUL terminated. If the compatible id is stored after sub-compatible id, and the compatible id is full length (8 bytes), the (useless) NUL terminator overwrites the first byte of the sub-compatible id. If the sub-compatible id is full length (8 bytes), the (useless) NUL terminator ends up out of the buffer. The situation can happen in the RNDIS function, where the buffer is a part of struct f_rndis_opts. The next member of struct f_rndis_opts is a mutex, so its first byte gets overwritten. The said byte is a part of a mutex'es member which contains the information on whether the muext is locked or not. This can lead to a deadlock, because, in a configfs-composed gadget when a function is linked into a configuration with config_usb_cfg_link(), usb_get_function() is called, which then calls rndis_alloc(), which tries locking the same mutex and (wrongly) finds it already locked. This patch eliminates NUL terminating of the (sub)compatible id. Cc: <stable@vger.kernel.org> # v3.16+ Fixes: da4243145fb1: "usb: gadget: configfs: OS Extended Compatibility descriptors support" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: dwc3: dwc3-omap: Fix disable IRQGeorge Cherian1-2/+28
In the wrapper the IRQ disable should be done by writing 1's to the IRQ*_CLR register. Existing code is broken because it instead writes zeros to IRQ*_SET register. Fix this by adding functions dwc3_omap_write_irqmisc_clr() and dwc3_omap_write_irq0_clr() which do the right thing. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: <stable@vger.kernel.org> # v3.2+ Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: gadget: function: uvc_v4l2.c: fix sparse warningsLad, Prabhakar1-0/+1
this patch fixes following sparse warnings: uvc_v4l2.c:264:29: warning: symbol 'uvc_v4l2_ioctl_ops' was not declared. Should it be static? uvc_v4l2.c:355:29: warning: symbol 'uvc_v4l2_fops' was not declared. Should it be static? Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: gadget: gadgetfs: fix sparse warningsLad, Prabhakar1-2/+4
this patch fixes following sparse warnings: g_ffs.c:136:3: warning: symbol 'gfs_configurations' was not declared. Should it be static? g_ffs.c:281:16: warning: Using plain integer as NULL pointer Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: gadget: function: uvc: fix sparse warningsLad, Prabhakar1-0/+1
this patch fixes following sparse warnings: uvc_video.c:283:5: warning: symbol 'uvcg_video_pump' was not declared. Should it be static? uvc_video.c:342:5: warning: symbol 'uvcg_video_enable' was not declared. Should it be static? uvc_video.c:381:5: warning: symbol 'uvcg_video_init' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: gadget: function: f_sourcesink: fix sparse warningLad, Prabhakar1-2/+2
this patch fixes following sparse warnings: f_sourcesink.c:347:34: warning: symbol 'ss_int_source_comp_desc' was not declared. Should it be static? f_sourcesink.c:365:34: warning: symbol 'ss_int_sink_comp_desc' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: gadget: function: f_uac2: fix sparse warningsLad, Prabhakar1-17/+17
this patch fixes following sparse warnings: f_uac2.c:57:12: warning: symbol 'uac2_name' was not declared. Should it be static? f_uac2.c:637:36: warning: symbol 'in_clk_src_desc' was not declared. Should it be static? f_uac2.c:649:36: warning: symbol 'out_clk_src_desc' was not declared. Should it be static? f_uac2.c:661:39: warning: symbol 'usb_out_it_desc' was not declared. Should it be static? f_uac2.c:675:39: warning: symbol 'io_in_it_desc' was not declared. Should it be static? f_uac2.c:689:40: warning: symbol 'usb_in_ot_desc' was not declared. Should it be static? f_uac2.c:703:40: warning: symbol 'io_out_ot_desc' was not declared. Should it be static? f_uac2.c:716:34: warning: symbol 'ac_hdr_desc' was not declared. Should it be static? f_uac2.c:754:34: warning: symbol 'as_out_hdr_desc' was not declared. Should it be static? f_uac2.c:767:38: warning: symbol 'as_out_fmt1_desc' was not declared. Should it be static? f_uac2.c:775:32: warning: symbol 'fs_epout_desc' was not declared. Should it be static? f_uac2.c:785:32: warning: symbol 'hs_epout_desc' was not declared. Should it be static? f_uac2.c:831:34: warning: symbol 'as_in_hdr_desc' was not declared. Should it be static? f_uac2.c:844:38: warning: symbol 'as_in_fmt1_desc' was not declared. Should it be static? f_uac2.c:852:32: warning: symbol 'fs_epin_desc' was not declared. Should it be static? f_uac2.c:862:32: warning: symbol 'hs_epin_desc' was not declared. Should it be static? f_uac2.c:1566:21: warning: symbol 'afunc_alloc' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: gadget: function: f_hid: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: f_hid.c:572:30: warning: symbol 'f_hidg_fops' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: isp1760: use msecs_to_jiffies for time conversionNicholas Mc Guire1-3/+3
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: musb: Fix getting a generic phy for musb_dspsTony Lindgren1-1/+24
We still have a combination of legacy phys and generic phys in use so we need to support both types of phy for musb_dsps.c. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: renesas: fix extcon dependencyArnd Bergmann1-0/+1
The renesas usbhs driver calls extcon_get_edev_by_phandle(), which is defined in drivers/extcon/extcon-class.c, and that can be a loadable module. If the extcon-class support is disabled, usbhs will work correctly for all devices that do not need extcon. However, if extcon-class is a loadable module, and usbhs is built-in, the kernel fails to link. In order to solve that, we need a Kconfig dependency that allows extcon to be disabled but does not allow usbhs built-in if extcon is a module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: musb: Fix use for of_property_read_bool for disabled multipointTony Lindgren2-4/+10
The value for the multipoint dts property is ignored when parsing with of_property_read_bool, so we currently have multipoint always set as 1 even if value 0 is specified in the dts file. Let's fix this to read the value too instead of just the property like the binding documentation says as otherwise MUSB will fail to work on devices with Mentor configuration that does not support multipoint. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: musb: core: add pm_runtime_irq_safe()Felipe Balbi1-4/+6
We need a pm_runtime_get_sync() call from within musb_gadget_pullup() to make sure registers are accessible at that time. The problem is that musb_gadget_pullup() is called with IRQs disabled and, because of that, we need to tell pm_runtime that this pm_runtime_get_sync() is IRQ safe. We can simply add pm_runtime_irq_safe(), however, because we need to make our read/write accessor function pointers have been initialized before trying to use them. This means that all pm_runtime initialization for musb_core needs to be moved down so that when we call pm_runtime_irq_safe(), the pm_runtime_get_sync() that it calls on the parent, won't cause a crash due to NULL musb_read/write accessors. Reported-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: gadget: function: phonet: balance usb_ep_disable callsFelipe Balbi1-1/+4
f_phonet's ->set_alt() method will call usb_ep_disable() potentially on an endpoint which is already disabled. That's something the gadget/function driver must guarantee that it's always balanced. In order to balance the calls, just make sure the endpoint was enabled before by means of checking the validity of driver_data. Reported-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom halfGeorge Cherian1-1/+1
Enable HCD_BH flag for musb host controller driver. This improves the MSC/UVC through put. With this enabled even 640x480@30fps webcam streaming is also supported. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds4-21/+21
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-17gadget: switch ep_io_operations to ->read_iter/->write_iterAl Viro1-214/+141
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-17gadgetfs: use-after-free in ->aio_read()Al Viro1-3/+12
AIO_PREAD requests call ->aio_read() with iovec on caller's stack, so if we are going to access it asynchronously, we'd better get ourselves a copy - the one on kernel stack of aio_run_iocb() won't be there anymore. function/f_fs.c take care of doing that, legacy/inode.c doesn't... Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-17gadget/function/f_fs.c: switch to ->{read,write}_iter()Al Viro1-78/+58
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-17gadget/function/f_fs.c: use put iov_iter into io_dataAl Viro1-61/+25
both on aio and non-aio sides Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-17gadget/function/f_fs.c: close leaksAl Viro1-2/+12
If ffs_epfile_io() fails in AIO case, we end up leaking io_data (and iovec_copy in case of AIO read). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-2/+2
Pull networking updates from David Miller: 1) Missing netlink attribute validation in nft_lookup, from Patrick McHardy. 2) Restrict ipv6 partial checksum handling to UDP, since that's the only case it works for. From Vlad Yasevich. 3) Clear out silly device table sentinal macros used by SSB and BCMA drivers. From Joe Perches. 4) Make sure the remote checksum code never creates a situation where the remote checksum is applied yet the tunneling metadata describing the remote checksum transformation is still present. Otherwise an external entity might see this and apply the checksum again. From Tom Herbert. 5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire. 6) Don't explicitly initialize timer struct fields, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi Nomura. 8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet. 9) Don't potentially perform skb_get() on shared skbs, also from Eric Dumazet. 10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin KaFai Lau. 11) Fix merge resolution error between the iov_iter changes in vhost and some bug fixes that occurred at the same time. From Jason Wang. 12) If rtnl_configure_link() fails we have to perform a call to ->dellink() before unregistering the device. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits) net: dsa: Set valid phy interface type rtnetlink: call ->dellink on failure when ->newlink exists com20020-pci: add support for eae single card vhost_net: fix wrong iter offset when setting number of buffers net: spelling fixes net/core: Fix warning while make xmldocs caused by dev.c net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081 ipv6: fix ipv6_cow_metrics for non DST_HOST case openvswitch: Fix key serialization. r8152: restore hw settings hso: fix rx parsing logic when skb allocation fails tcp: make sure skb is not shared before using skb_get() bridge: netfilter: Move sysctl-specific error code inside #ifdef ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc ipvlan: add a missing __percpu pcpu_stats tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one() bgmac: fix device initialization on Northstar SoCs (condition typo) qlcnic: Delete existing multicast MAC list before adding new net/mlx5_core: Fix configuration of log_uar_page_sz sunvnet: don't change gso data on clones ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 02:54:12 +0000