summaryrefslogtreecommitdiff
path: root/drivers/usb/musb
AgeCommit message (Collapse)AuthorFilesLines
2011-04-13usb: musb: omap2430: fix build failureJohan Hovold1-1/+2
Fix build failure introduced by commit 7acc6197b76edd0b932a7cbcc6cfad0a8a87f026 (usb: musb: Idle path retention and offmode support for OMAP3) when building without gadget support. CC drivers/usb/musb/omap2430.o drivers/usb/musb/omap2430.c: In function ‘musb_otg_notifications’: drivers/usb/musb/omap2430.c:262: error: ‘struct musb’ has no member named ‘gadget_driver’ Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: musb: blackfin: work around anomaly 05000450Mike Frysinger3-0/+37
DMA mode 1 data corruption anomaly on Blackfin systems. This issue is specific to the Blackfin silicon as the bug appears to be related to the connection of the musb ip to the bus/dma fabric. Data corruption when using USB DMA mode 1. (Issue manager 17-01-0105) DMA mode 1 allows large size transfers to generate a single interrupt at the end of the entire transfer. The transfer is split up in packets of length specified in the Maximum Packet Size field for that endpoint. If the transfer size is not an integer multiple of the Maximum Packet Size, a short packet will be present at the end of the transfer. Under certain conditions this packet may be corrupted in the USB FIFO. Workaround: Use DMA mode 1 to transfer (n* Maximum Packet Size) and schedule DMA mode 0 to transfer the short packet. As an example if your transfer size is 33168 bytes and Maximum Packet Size equals 512, schedule [33168 - (33168 mod 512)] in DMA mode 1 and the remainder (33168 mod 512) in DMA mode 0. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13usb: musb: Fix the crash issue during rebootHema HK1-0/+2
Below crash observed with commit 7acc6197b76edd0b932a7cbcc6cfad0a8a87f026 (usb: musb: Idle path retention and offmode support for OMAP3) during board reboot. The musb clock was disabled when musb_shutdown() was called by platform_drv_shutdown in which there are register accesses. call pm_runtime_get_sync() and pm_runtime_put_sync() in the musb_shutdown function. / # [ 172.368774] Unhandled fault: imprecise external abort (0x1406) at 0x400f0000 [ 172.376190] Internal error: : 1406 [#1] SMP [ 172.380554] last sysfs file: /sys/devices/platform/omap/omap_i2c.4/i2c-4/i2c-dev/i2c-4/dev [ 172.389221] Modules linked in: [ 172.392456] CPU: 0 Tainted: G W (2.6.38-06671-geddecbb #33) [ 172.399475] PC is at do_raw_spin_unlock+0x50/0xc0 [ 172.404418] LR is at _raw_spin_unlock_irqrestore+0x24/0x44 [ 172.410186] pc : [<c069bfdc>] lr : [<c085a7f8>] psr: 60000093 [ 172.410186] sp : ee993e40 ip : c0d00240 fp : bea9cf14 [ 172.422241] r10: 00000000 r9 : ee992000 r8 : c04b2fa8 [ 172.427703] r7 : 00000000 r6 : c0fa46c0 r5 : ef966124 r4 : ef966124 [ 172.434539] r3 : ef92cbc0 r2 : ef92cbc0 r1 : 00000000 r0 : ef966124 [ 172.441406] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 172.448974] Control: 10c5387d Table: ae8d804a DAC: 00000015 [ 172.454986] Process init (pid: 1094, stack limit = 0xee9922f8) [ 172.461120] Stack: (0xee993e40 to 0xee994000) [ 172.465667] 3e40: a0000013 c085a7f8 ef966124 a0000013 c0fa46c0 c0761ab4 c0761a70 ef95c008 [ 172.474273] 3e60: ef95c014 c06e2fd0 c06e2fbc c06dea90 00000000 01234567 28121969 c04fccb4 [ 172.482849] 3e80: 00000000 c04fcd04 c0a302bc c04fce44 c0a02600 00000001 00000000 c085cd04 [ 172.491424] 3ea0: 00000000 00000002 c09ea000 c085afc0 ee993f24 00000000 00040001 00000445 [ 172.499999] 3ec0: a8eb9d34 00000027 00000000 00000000 00000000 c0a56a4c 00000000 00000000 [ 172.508575] 3ee0: 00000002 60000093 00000000 c0519aac 00000002 00000080 00000000 c0550420 [ 172.517150] 3f00: 00000000 00000002 ee970000 c0a56a3c c0a56a20 00000002 c0a56a3c 00000000 [ 172.525726] 3f20: c0a56a3c 0000000a c1580e00 c0a56a20 00000002 c0a56a3c c1580e00 c0a56a20 [ 172.534301] 3f40: ef92cbc0 c05173a0 00000001 ef92cbc0 c0576190 c04e3174 20000013 c0517324 [ 172.542877] 3f60: ef815c00 ee90b720 c04e3174 c0576190 00000001 ef92cbc0 c04b2f00 ffffffff [ 172.551483] 3f80: 00000058 c0517324 00000000 00000000 ffffffff 00000000 00000000 ffffffff [ 172.560058] 3fa0: 00000058 c04b2de0 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 172.568634] 3fc0: 00000000 00000000 ffffffff 00000058 00000000 00000001 400aa000 bea9cf14 [ 172.577209] 3fe0: 000ea148 bea9c958 000aa750 40225728 60000010 fee1dead 00000000 00000000 [ 172.585784] [<c069bfdc>] (do_raw_spin_unlock+0x50/0xc0) from [<c085a7f8>] (_raw_spin_unlock_irqrestore+0x24/0x44) [ 172.596588] [<c085a7f8>] (_raw_spin_unlock_irqrestore+0x24/0x44) from [<c0761ab4>] (musb_shutdown+0x44/0x88) [ 172.606933] [<c0761ab4>] (musb_shutdown+0x44/0x88) from [<c06e2fd0>] (platform_drv_shutdown+0x14/0x18) [ 172.616699] [<c06e2fd0>] (platform_drv_shutdown+0x14/0x18) from [<c06dea90>] (device_shutdown+0x74/0xb4) [ 172.626647] [<c06dea90>] (device_shutdown+0x74/0xb4) from [<c04fccb4>] (kernel_restart_prepare+0x24/0x38) [ 172.636688] [<c04fccb4>] (kernel_restart_prepare+0x24/0x38) from [<c04fcd04>] (kernel_restart+0xc/0x48) [ 172.646545] [<c04fcd04>] (kernel_restart+0xc/0x48) from [<c04fce44>] (sys_reboot+0xfc/0x1d8) [ 172.655426] [<c04fce44>] (sys_reboot+0xfc/0x1d8) from [<c04b2de0>] (ret_fast_syscall+0x0/0x3c) [ 172.664459] Code: e3c3303f e594200c e593300c e1520003 (0a000002) [ 172.670867] ------------[ cut here ]------------ Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13usb: musb: gadget: check the correct list_headFelipe Balbi1-1/+1
We are now using our own list_head, so we should be checking against that, not the gadget driver's list_head. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13usb: musb: temporarily make it boolFelipe Balbi1-3/+3
Due to the recent changes to musb's glue layers, we can't compile musb-hdrc as a module - compilation will break due to undefined symbol musb_debug. In order to fix that, we need a big re-work of the debug support on the MUSB driver. Because that would mean a lot of new code coming into the -rc series, it's best to defer that to next merge window and for now just disable module support for MUSB. Once we get the refactor of the debugging support done, we can simply revert this patch and things will go back to normal again. Cc: stable@kernel.org # v2.6.38 Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13USB: musb: dereferencing an iomem pointerDan Carpenter1-1/+1
"tx_ram" points to io memory. We can't dereference it directly. Sparse complains about this: "drivers/usb/musb/cppi_dma.c:1205:25: warning: dereference of noderef expression" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13USB: musb: silence printk format warningDan Carpenter1-8/+10
Gcc gives the following warnings: drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_tx_segment’: drivers/usb/musb/cppi_dma.c:600: warning: format ‘%x’ expects type ‘unsigned int’, but argument 8 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_rx_segment’: drivers/usb/musb/cppi_dma.c:822: warning: format ‘%x’ expects type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c: In function ‘cppi_rx_scan’: drivers/usb/musb/cppi_dma.c:1042: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c:1114: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ dma_addr_t is sometimes 32 bit and sometimes 64. We normally cast them to unsigned long long for printk(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13USB: musb: using 0 instead of NULLDan Carpenter1-1/+1
Sparse complains (and rightly so): drivers/usb/musb/cppi_dma.c:1458:33: warning: Using plain integer as NULL pointer Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13USB: musb: add missing unlock in cppi_interrupt()Dan Carpenter1-1/+4
We should unlock before returning here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13usb: musb: ux500: copy dma mask from platform device to musb deviceMian Yousaf Kaukab1-0/+2
musb code checks dma mask before calling dma hooks. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13usb: musb: clear AUTOSET while clearing DMAENABMian Yousaf Kaukab1-1/+1
On the completion of tx dma, dma is disabled by clearing MUSB_TXCSR_DMAENAB in TXCSR. If MUSB_TXCSR_AUTOSET was set in txstate() it will remain set although it is not needed in PIO mode. Clear it as soon as it is not needed. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-29drivers: Final irq namespace conversionThomas Gleixner1-1/+1
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-23usb: musb: blackfin: fix typo in new bfin_musb_vbus_status funcMike Frysinger1-1/+1
The common code has a "get" in the middle, but each implementation does not have it. Cc: stable@kernel.org Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in new dev_pm_ops structBob Liu1-1/+1
Cc: stable@kernel.org Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in platform driver nameMike Frysinger1-1/+1
The modularization of the Blackfin driver set the name to "musb-blackfin" in all the boards, but "musb-bfin" in the driver itself. Since the driver file name uses "blackfin", change the driver to "musb-blackfin". This is also easier as it's only one file to change. Cc: stable@kernel.org Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: Fix for merge issueHema HK1-4/+4
There was conflict while merging 2 patches. Enabling vbus code is wrongly moved to error check if loop. This is a fix to resolve the merge issue. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-16Merge branch 'usb-next' of ↵Linus Torvalds9-234/+275
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits) USB: Add support for SuperSpeed isoc endpoints xhci: Clean up cycle bit math used during stalls. xhci: Fix cycle bit calculation during stall handling. xhci: Update internal dequeue pointers after stalls. USB: Disable auto-suspend for USB 3.0 hubs. USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol. xhci: Return canceled URBs immediately when host is halted. xhci: Fixes for suspend/resume of shared HCDs. xhci: Fix re-init on power loss after resume. xhci: Make roothub functions deal with device removal. xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports. xhci: Return a USB 3.0 hub descriptor for USB3 roothub. xhci: Register second xHCI roothub. xhci: Change xhci_find_slot_id_by_port() API. xhci: Refactor bus suspend state into a struct. xhci: Index with a port array instead of PORTSC addresses. USB: Set usb_hcd->state and flags for shared roothubs. usb: Make core allocate resources per PCI-device. usb: Store bus type in usb_hcd, not in driver flags. usb: Change usb_hcd->bandwidth_mutex to a pointer. ...
2011-03-13USB 3.0 Hub ChangesJohn Youn1-2/+2
Update the USB core to deal with USB 3.0 hubs. These hubs have a slightly different hub descriptor than USB 2.0 hubs, with a fixed (rather than variable length) size. Change the USB core's hub descriptor to have a union for the last fields that differ. Change the host controller drivers that access those last fields (DeviceRemovable and PortPowerCtrlMask) to use the union. Translate the new version of the hub port status field into the old version that khubd understands. (Note: we need to fix it to translate the roothub's port status once we stop converting it to USB 2.0 hub status internally.) Add new code to handle link state change status. Send out new control messages that are needed for USB 3.0 hubs, like Set Hub Depth. This patch is a modified version of the original patch submitted by John Youn. It's updated to reflect the removal of the "bitmap" #define, and change the hub descriptor accesses of a couple new host controller drivers. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> Cc: Max Vozeler <mvz@vozeler.com> Cc: Tejun Heo <tj@kernel.org> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Rodolfo Giometti <giometti@linux.it> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Lothar Wassmann <LW@KARO-electronics.de> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Martin Fuzzey <mfuzzey@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net>
2011-03-02Merge branch 'devel-cleanup' into omap-for-linusTony Lindgren3-8/+11
Conflicts: arch/arm/mach-omap2/timer-gp.c
2011-03-01usb: musb: tusb: Fix possible null pointer dereference in tusb6010_omap.cHuzaifa Sidhpurwala1-2/+2
tusb_dma was being dereferenced when it was nul Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01usb: musb: OMAP3xxx: Fix device detection in otg & host modeHema HK1-8/+2
In OMAP3xxx with OTG mode or host only mode, When the device is inserted after the gadget driver loading the enumeration was not through. This is because the mentor controller will start sensing the ID PIN only after setting the session bit. So after ID-GND, need to set the session bit for mentor to get it configured as A device. This is a fix to set the session bit again in ID_GND notification handler. Tested with OMAP3630Zoom3 platform. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01usb: musb: Idle path retention and offmode support for OMAP3Hema HK3-22/+78
This patch supports the retention and offmode support in the idle path for musb driver using runtime pm APIs. This is restricted to support offmode and retention only when device not connected.When device/cable connected with gadget driver loaded,configured to no idle/standby which will not allow the core transition to retention or off. There is no context save/restore done by hardware for musb in OMAP3 and OMAP4,driver has to take care of saving and restoring the context during offmode. Musb has a requirement of configuring sysconfig register to force idle/standby mode and set the ENFORCE bit in module STANDBY register for retention and offmode support. Runtime pm and hwmod frameworks will take care of configuring to force idle/standby when pm_runtime_put_sync is called and back to no idle/standby when pm_runeime_get_sync is called. Compile, boot tested and also tested the retention in the idle path on OMAP3630Zoom3. And tested the global suspend/resume with offmode enabled. Usb basic functionality tested on OMAP4430SDP. There is some problem with idle path offmode in mainline, I could not test with offmode. But I have tested this patch with resetting the controller in the idle path when wakeup from retention just to make sure that the context is lost, and restore path is working fine. Removed .suspend/.resume fnction pointers and functions because there is no need of having these functions as all required work is done at runtime in the driver. There is no need to call the runtime pm api with glue driver device as glue layer device is the parent of musb core device, when runtime apis are called for the child, parent device runtime functionality will be invoked. Design overview: pm_runtime_get_sync: When called with musb core device takes care of enabling the clock, calling runtime callback function of omap2430 glue layer, runtime call back of musb driver and configure the musb sysconfig to no idle/standby pm_runtime_put: Takes care of calling runtime callback function of omap2430 glue layer, runtime call back of musb driver, Configure the musb sysconfig to force idle/standby and disable the clock. During musb driver load: Call pm_runtime_get_sync. End of musb driver load: Call pm_runtime_put During gadget driver load: Call pm_runtime_get_sync, End of gadget driver load: Call pm_runtime_put if there is no device or cable is connected. During unload of the gadget driver:Call pm_runtime_get_sync if cable/device is not connected. End of the gadget driver unload : pm_runtime_put During unload of musb driver : Call pm_runtime_get_sync End of unload: Call pm_runtime_put On connect of usb cable/device -> transceiver notification(VBUS and ID-GND): pm_runtime_get_sync only if the gadget driver loaded. On disconnect of the cable/device -> Disconnect Notification: pm_runtime_put if the gadget driver is loaded. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01usb: musb: Remove platform context save/restore APIHema HK2-15/+0
For OMAP3 and OMAP4 for offmode and retention support, musb sysconfig is configured to force idle and standby with ENABLE_FORCE bit of OTG_FORCESTNDBY set. And on wakeup configure to no ilde/standby with resetting the ENABLE_FORCE bit. There is not need to save and restore of this register anymore so removed omap2430_save_context/omap2430_restore_context functions. and also removed otg_forcestandby member of musb_context_registers structure Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01usb: musb: gadget: fix list_head usageFelipe Balbi1-3/+4
commit ad1adb89a0d9410345d573b6995a1fa9f9b7c74a (usb: musb: gadget: do not poke with gadget's list_head) fixed a bug in musb where it was corrupting the list_head which is supposed to be used by gadget drivers. While doing that, I forgot to fix the usage in musb_gadget_dequeue() method. Fix that. Reported-by: Pavol Kurina <pavol.kurina@emsys.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-24usb: musb: core: set has_tt flagFelipe Balbi1-0/+1
MUSB is a non-standard host implementation which can handle all speeds with the same core. We need to set has_tt flag after commit d199c96d41d80a567493e12b8e96ea056a1350c1 (USB: prevent buggy hubs from crashing the USB stack) in order for MUSB HCD to continue working. Signed-off-by: Felipe Balbi <balbi@ti.com> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Tested-by: Michael Jones <michael.jones@matrix-vision.de> Tested-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-21usb: musb: gadget: DBG() already prints function nameSergei Shtylyov1-4/+4
In the gadget code, there are several DBG() macro invocations that explicitly print the calling function's name while DBG() macro itself does this anyway; most of these were added by commit f11d893de444965dfd3e55f726533ae1df5c6471 (usb: musb: support ISO high bandwidth for gadget mode). Remove the duplicated printing, somewhat clarifying the messages at the same time... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-18usb: musb: OMAP4430: Fix usb device detection if connected during bootHema HK2-5/+52
OMAP4430 is embedded with UTMI PHY. This PHY does not support the OTG features like ID pin detection and VBUS detection. This function is exported to an external companion chip TWL6030. Software must retrieve the OTG HNP and SRP status from the TWL6030 and configure the bits inside the control module that drive the related USBOTGHS UTMI interface signals. It must also read back the UTMI signals needed to configure the TWL6030 OTG module. Can find more details in the TRM[1]. [1]:http://focus.ti.com/pdfs/wtbu/OMAP4430_ES2.0_Public_TRM_vJ.pdf In OMAP4430 musb driver VBUS and ID notifications are received from the transceiver driver. If the cable/device is connected during boot, notifications from transceiver driver will be missed till musb driver is loaded. Patch to configure the transceiver in the platform_enable/disable functions and enable the vbus in the gadget driver based on the last_event of the otg_transceiver. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: musb: Using runtime pm APIs for musb.Hema HK2-59/+24
Calling runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync() for enabling/disabling the clocks, sysconfig settings. Enable clock, configure no-idle/standby when active and configure force idle/standby and disable clock when idled. This is taken care by the runtime framework when driver calls the pm_runtime_get_sync and pm_runtime_put_sync APIs. Need to configure MUSB into force standby and force idle mode when usb not used Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: musb: gadget: do not poke with gadget's list_headFelipe Balbi4-31/+41
struct usb_request's list_head is supposed to be used only by gadget drivers, but musb is abusing that. Give struct musb_request its own list_head and prevent musb from poking into other driver's business. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: musb: gadget: beautify ↵Felipe Balbi1-71/+79
usb_gadget_probe_driver()/usb_gadget_unregister_driver Just a few cosmetic fixes to usb_gadget_probe_driver() and usb_gadget_unregister_driver(). Decreased a few indentation levels with goto statements. While at that, also add the missing call to musb_stop(). If we don't have OTG, there's no point of leaving MUSB prepared for operation if a gadget driver fails to probe. The same is valid for usb_gadget_unregister_driver(), since we are removing the gadget driver and we don't have OTG, we can completely unconfigure MUSB. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: musb: do not error out if Kconfig doesn't match board modeFelipe Balbi1-25/+0
During development, even though board is wired to e.g. OTG, we might want to compile host-only or peripheral-only configurations. Let's allow that to happen. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17Merge 2.6.38-rc5 into usb-nextGreg Kroah-Hartman8-42/+93
This is needed to resolve some merge conflicts that were found in the USB host controller patches, and reported by Stephen Rothwell. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17usb: musb: omap2430: fix kernel panic on rebootJohan Hovold1-0/+1
Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [<c02377d8>] lr : [<c02377cc>] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [<c02377d8>] (musb_do_idle+0x24/0x138) from [<c005fa34>] (run_timer_softirq+0x1a8/0x26) [<c005fa34>] (run_timer_softirq+0x1a8/0x26c) from [<c005ac14>] (__do_softirq+0x88/0x13) [<c005ac14>] (__do_softirq+0x88/0x138) from [<c005ad08>] (irq_exit+0x44/0x98) [<c005ad08>] (irq_exit+0x44/0x98) from [<c002e07c>] (asm_do_IRQ+0x7c/0xa0) [<c002e07c>] (asm_do_IRQ+0x7c/0xa0) from [<c0033608>] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [<c0033608>] (__irq_svc+0x48/0xa8) from [<c004f7d8>] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: musb: fix build breakageFelipe Balbi1-8/+9
commit 0662481855c389b75a0a54c32870cc90563d80a9 (usb: musb: disable double buffering when it's broken), introduced a compile error when gadget API is disabled. Fix it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-16Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and ↵Tony Lindgren3-5/+5
'devel-ti816x' into omap-for-linus
2011-02-04USB: HCD: Add usb_hcd prefix to exported functionsRobert Morell1-2/+2
The convention is to prefix symbols exported from the USB HCD core with "usb_hcd". This change makes unmap_urb_setup_for_dma() and unmap_urb_for_dma() consistent with that. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-01usb: musb: introduce api for dma code to check compatibility with usb requestMian Yousaf Kaukab2-0/+17
Gadget MUSB driver handles dma mappings in musb_gadget_queue(). Where as it is possible for dma code to reject the usb request later at ->channel_program() called from txstate()/rxstate() For example ->channel_program in tusb6010_omap.c: static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, u8 rndis_mode, dma_addr_t dma_addr, u32 len) { ... if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz)) return false; ... if (dma_addr & 0x2) return false; ... } In this case, usb request will be handled in PIO mode which renders dma mapping operations unnecessary. This patch adds an api to allow dma code to indicate incompatibility with usb request. Gadget musb driver call this api, if available, before dma mappings to avoid any unnecessary mapping operations. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01usb: musb: maintain three states for buffer mappings instead of twoMian Yousaf Kaukab2-21/+32
If dma buffers are mapped by a higher layer, with a boolean musb_request.mapped it is still possible to call dma_sync_single_for_device() from musb_g_giveback(), even if txstate()/rxstate() has called unmap_dma_buffer() before falling back to pio mode. Moreover, check for musb_ep->dma is moved within map_dma_buffer() so where applicable checks for it are removed. And where possible, checks for is_dma_capable() are merged with buffer map state check. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01usb: musb: disable double buffering when it's brokenFelipe Balbi4-8/+28
We know that blackfin doesn't support double buffering feature as of today. So we add a flag set by musb_platform_init() to forcefully disable that feature. Such flag is created and marked as deprecated to force us to find a solution for the missing double buffering support on blackfin. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01usb: musb: hsdma: change back to use musb_read/writewBob Liu1-5/+14
Blackfin platform doesn't support 32bits musbdma registers, so change back to use musb_read/writew instead of musb_read/writel and simply some format casts. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01usb: musb: core: fix IRQ checkSergei Shtylyov1-1/+1
musb_probe() only regards 0 as a wrong IRQ number, despite platform_get_irq() that it calls returns -ENXIO in that case. It leads to musb_init_controller() calling request_irq() with a negative IRQ number, and when it naturally fails, the following is printed to the console: request_irq -6 failed! musb_init_controller failed with status -19 Fix musb_probe() to filter out the error values as well as 0. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01usb: musb: fix kernel panic during s2ram(v2)Ming Lei1-7/+1
This patch fixes kernel panic during s2ram, which is caused by the below: - musb is not put into drv data of musb platform device if CONFIG_USB_MUSB_HDRC_HCD is defined - glue layer driver always get musb instance via platform_get_drvdata. The patch fixes the issue by always puting musb into drv data of musb platform device, which is doable even the platform device is a host controller device. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-01-27omap: Start using CONFIG_SOC_OMAPTony Lindgren3-5/+5
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-10headers: kobject.h reduxAlexey Dobriyan1-1/+0
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22Merge branch 'master' into for-nextJiri Kosina6-107/+201
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-16Merge branch 'usb-next' into musb-mergeGreg Kroah-Hartman17-594/+1674
* usb-next: (132 commits) USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added usb: gadget: f_ncm.c added usb: gadget: u_ether: prepare for NCM usb: pch_udc: Fix setup transfers with data out usb: pch_udc: Fix compile error, warnings and checkpatch warnings usb: add ab8500 usb transceiver driver USB: gadget: Implement runtime PM for MSM bus glue driver USB: gadget: Implement runtime PM for ci13xxx gadget USB: gadget: Add USB controller driver for MSM SoC USB: gadget: Introduce ci13xxx_udc_driver struct USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc USB: gadget: Separate out PCI bus code from ci13xxx_udc ...
2010-12-16Revert "USB: musb: pm: don't rely fully on clock support"Greg Kroah-Hartman1-12/+14
This reverts commit 32d5dc9520f0c6f60f691dd478741c774e292406. Needed to properly merge the musb changes that are in the usb-next branch into Linus's tree. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16Revert "USB: musb: blackfin: pm: make it work"Greg Kroah-Hartman2-50/+24
This reverts commit 1e393c6eece048052d4131ec4dad3b98e35a98e2. Needed to properly merge the musb changes that are in the usb-next branch into Linus's tree. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 15:49:27 +0000