summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2/platform.c
AgeCommit message (Collapse)AuthorFilesLines
2015-01-12usb: dwc2: platform: add generic PHY framework supportYunzhi Li1-2/+34
Get PHY parameters from devicetree and power off usb PHY during system suspend. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-25usb: dwc2: Fix build warning when CONFIG_PM_SLEEP=nFabio Estevam1-2/+2
Building with bcm2835_defconfig, which has CONFIG_PM_SLEEP=n causes the following build warning: drivers/usb/dwc2/platform.c:227:12: warning: 'dwc2_suspend' defined but not used [-Wunused-function] drivers/usb/dwc2/platform.c:237:12: warning: 'dwc2_resume' defined but not used [-Wunused-function] Annotate these functions with '__maybe_unused' to prevent the warnings. Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21usb: dwc2: gadget: add mutex to serialize init/deinit callsMarek Szyprowski1-0/+2
This patch adds mutex, which protects initialization and deinitialization procedures against suspend/resume methods. This mutex will be needed by the updated suspend/resume calls, which tracks gadget state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-14usb: dwc2: move usb_disabled() call to host driver onlyDinh Nguyen1-3/+0
Since platform.c will get built for both Host and Gadget, if we leave the usb_disabled() call in platform.c, it results in the following build error when (!USB && USB_GADGET) condition is met. ERROR: "usb_disabled" [drivers/usb/dwc2/dwc2_platform.ko] undefined! Since usb_disabled() is mostly used to disable USB host functionality, move the call the host portion for the DWC2 driver. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-14usb: dwc2: Update common interrupt handler to call gadget interrupt handlerDinh Nguyen1-0/+8
Make dwc2_handle_common_intr call the gadget interrupt function when operating in peripheral mode. Remove the spinlock functions in s3c_hsotg_irq as dwc2_handle_common_intr() already has the spinlocks. Move the registeration of the IRQ to common code for platform and PCI. Remove duplicate interrupt conditions that was in gadget, as those are handled by dwc2 common interrupt handler. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-14usb: dwc2: convert to use dev_pm_ops APIDinh Nguyen1-6/+9
Update suspend/resume to use dev_pm_ops API. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-14usb: dwc2: Move gadget probe function into platform codeDinh Nguyen1-0/+28
This patch will aggregate the probing of gadget/hcd driver into platform.c. The gadget probe funtion is converted into gadget_init that is now only responsible for gadget only initialization. All the gadget resources are now handled by platform.c Since the host workqueue will not get initialized if the driver is configured for peripheral mode only. Thus we need to check for wq_otg before calling queue_work(). Also, we move spin_lock_init to common location for both host and gadget that is either in platform.c or pci.c. We also move suspend/resume code to common platform code. Lastly, move the "samsung,s3c6400-hsotg" binding into dwc2_of_match_table. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-11Revert "usb: dwc2: move "samsung,s3c6400-hsotg" into common platform"Robert Baldyga1-1/+0
This reverts commit 8df438571cdbd5c4fcd1b25b19eea1ad5c3cf777. This patch breaks building dwc2 driver in gadget mode at samsung platforms. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08usb: dwc2: move "samsung,s3c6400-hsotg" into common platformDinh Nguyen1-0/+1
Move the "samsung,s3c6400-hsotg" binding as the probe function in the gadget driver will get removed when the dual-role driver is implemented. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08usb: dwc2: add 'mode' which based on Kconfig select or dts settingKever Yang1-0/+4
According to the "dr_mode", the otg controller can work as device role and host role. Some boards always want to use host mode and some other boards want to use gadget mode. We use the dts setting to set dwc2's mode, rather than fixing it to whatever hardware says. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08usb: dwc2: add compatible data for rockchip socKever Yang1-0/+29
This patch add compatible data for dwc2 controller found on rk3066, rk3188 and rk3288 processors from rockchip. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: dwc2: Disable descriptor dma mode by defaultDinh Nguyen1-0/+6
Even though the IP supports Descriptor DMA mode, it does not support SPLIT transactions in this mode. So the driver, in its currently form, will not support LS/FS devices when connected to a HS Hub if Descriptor DMA mode is enabled. So we should just default to disable descriptor dma mode. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb: dwc2: bail out early when booting with "nousb"Andre Heider1-0/+3
Add usb_disabled() check to prevent kernel oops when booting with "nousb" in the cmdline: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at bus_add_device+0xe0/0x18c LR is at device_add_groups+0x1c/0x20 ... [<c02191c0>] (bus_add_device) from [<c0217130>] (device_add+0x41c/0x538) [<c0217130>] (device_add) from [<c023b1d4>] (usb_new_device+0x270/0x35c) [<c023b1d4>] (usb_new_device) from [<c0241174>] (usb_add_hcd+0x4fc/0x760) [<c0241174>] (usb_add_hcd) from [<c0254ce0>] (dwc2_hcd_init+0x434/0x510) [<c0254ce0>] (dwc2_hcd_init) from [<c02594f4>] (dwc2_driver_probe+0x130/0x170) [<c02594f4>] (dwc2_driver_probe) from [<c021bbd0>] (platform_drv_probe+0x28/0x58) Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13Move DWC2 driver out of stagingPaul Zimmerman1-0/+187
The DWC2 driver should now be in good enough shape to move out of staging. I have stress tested it overnight on RPI running mass storage and Ethernet transfers in parallel, and for several days on our proprietary PCI-based platform. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 10:58:13 +0000