summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2020-04-29Merge tag 'riscv-for-linus-5.7-rc4' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes. Specifically: - fix linker argument to allow linking with lld - build fix for configurations without a frame pointer - a handful of build fixes related the SBI 0.1 vs 0.2 split - remove STRICT_KERNEL_RWX for !MMU, which isn't useful" * tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU riscv: sbi: Fix undefined reference to sbi_shutdown tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export riscv: fix vdso build with lld RISC-V: stacktrace: Declare sp_in_global outside ifdef
2020-04-23tty: hvc: fix buffer overflow during hvc_alloc().Andrew Melnychenko1-9/+14
If there is a lot(more then 16) of virtio-console devices or virtio_console module is reloaded - buffers 'vtermnos' and 'cons_ops' are overflowed. In older kernels it overruns spinlock which leads to kernel freezing: https://bugzilla.redhat.com/show_bug.cgi?id=1786239 To reproduce the issue, you can try simple script that loads/unloads module. Something like this: while [ 1 ] do modprobe virtio_console sleep 2 modprobe -r virtio_console sleep 2 done Description of problem: Guest get 'Call Trace' when loading module "virtio_console" and unloading it frequently - clearly reproduced on kernel-4.18.0: [ 81.498208] ------------[ cut here ]------------ [ 81.499263] pvqspinlock: lock 0xffffffff92080020 has corrupted value 0xc0774ca0! [ 81.501000] WARNING: CPU: 0 PID: 785 at kernel/locking/qspinlock_paravirt.h:500 __pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.503173] Modules linked in: virtio_console fuse xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nft_objref nf_conntrack_tftp tun bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nft_chain_route_ipv6 nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nft_chain_route_ipv4 ip6_tables nft_compat ip_set nf_tables nfnetlink sunrpc bochs_drm drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm i2c_piix4 pcspkr crct10dif_pclmul crc32_pclmul joydev ghash_clmulni_intel ip_tables xfs libcrc32c sd_mod sg ata_generic ata_piix virtio_net libata crc32c_intel net_failover failover serio_raw virtio_scsi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: virtio_console] [ 81.517019] CPU: 0 PID: 785 Comm: kworker/0:2 Kdump: loaded Not tainted 4.18.0-167.el8.x86_64 #1 [ 81.518639] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 81.520205] Workqueue: events control_work_handler [virtio_console] [ 81.521354] RIP: 0010:__pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.522450] Code: 07 00 48 63 7a 10 e8 bf 64 f5 ff 66 90 c3 8b 05 e6 cf d6 01 85 c0 74 01 c3 8b 17 48 89 fe 48 c7 c7 38 4b 29 91 e8 3a 6c fa ff <0f> 0b c3 0f 0b 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 [ 81.525830] RSP: 0018:ffffb51a01ffbd70 EFLAGS: 00010282 [ 81.526798] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 81.528110] RDX: ffff9e66f1826480 RSI: ffff9e66f1816a08 RDI: ffff9e66f1816a08 [ 81.529437] RBP: ffffffff9153ff10 R08: 000000000000026c R09: 0000000000000053 [ 81.530732] R10: 0000000000000000 R11: ffffb51a01ffbc18 R12: ffff9e66cd682200 [ 81.532133] R13: ffffffff9153ff10 R14: ffff9e6685569500 R15: ffff9e66cd682000 [ 81.533442] FS: 0000000000000000(0000) GS:ffff9e66f1800000(0000) knlGS:0000000000000000 [ 81.534914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.535971] CR2: 00005624c55b14d0 CR3: 00000003a023c000 CR4: 00000000003406f0 [ 81.537283] Call Trace: [ 81.537763] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20 [ 81.539011] .slowpath+0x9/0xe [ 81.539585] hvc_alloc+0x25e/0x300 [ 81.540237] init_port_console+0x28/0x100 [virtio_console] [ 81.541251] handle_control_message.constprop.27+0x1c4/0x310 [virtio_console] [ 81.542546] control_work_handler+0x70/0x10c [virtio_console] [ 81.543601] process_one_work+0x1a7/0x3b0 [ 81.544356] worker_thread+0x30/0x390 [ 81.545025] ? create_worker+0x1a0/0x1a0 [ 81.545749] kthread+0x112/0x130 [ 81.546358] ? kthread_flush_work_fn+0x10/0x10 [ 81.547183] ret_from_fork+0x22/0x40 [ 81.547842] ---[ end trace aa97649bd16c8655 ]--- [ 83.546539] general protection fault: 0000 [#1] SMP NOPTI [ 83.547422] CPU: 5 PID: 3225 Comm: modprobe Kdump: loaded Tainted: G W --------- - - 4.18.0-167.el8.x86_64 #1 [ 83.549191] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 83.550544] RIP: 0010:__pv_queued_spin_lock_slowpath+0x19a/0x2a0 [ 83.551504] Code: c4 c1 ea 12 41 be 01 00 00 00 4c 8d 6d 14 41 83 e4 03 8d 42 ff 49 c1 e4 05 48 98 49 81 c4 40 a5 02 00 4c 03 24 c5 60 48 34 91 <49> 89 2c 24 b8 00 80 00 00 eb 15 84 c0 75 0a 41 0f b6 54 24 14 84 [ 83.554449] RSP: 0018:ffffb51a0323fdb0 EFLAGS: 00010202 [ 83.555290] RAX: 000000000000301c RBX: ffffffff92080020 RCX: 0000000000000001 [ 83.556426] RDX: 000000000000301d RSI: 0000000000000000 RDI: 0000000000000000 [ 83.557556] RBP: ffff9e66f196a540 R08: 000000000000028a R09: ffff9e66d2757788 [ 83.558688] R10: 0000000000000000 R11: 0000000000000000 R12: 646e61725f770b07 [ 83.559821] R13: ffff9e66f196a554 R14: 0000000000000001 R15: 0000000000180000 [ 83.560958] FS: 00007fd5032e8740(0000) GS:ffff9e66f1940000(0000) knlGS:0000000000000000 [ 83.562233] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 83.563149] CR2: 00007fd5022b0da0 CR3: 000000038c334000 CR4: 00000000003406e0 Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200414191503.3471783-1-andrew@daynix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23tty: rocket, avoid OOB accessJiri Slaby1-11/+14
init_r_port can access pc104 array out of bounds. pc104 is a 2D array defined to have 4 members. Each member has 8 submembers. * we can have more than 4 (PCI) boards, i.e. [board] can be OOB * line is not modulo-ed by anything, so the first line on the second board can be 4, on the 3rd 12 or alike (depending on previously registered boards). It's zero only on the first line of the first board. So even [line] can be OOB, quite soon (with the 2nd registered board already). This code is broken for ages, so just avoid the OOB accesses and don't try to fix it as we would need to find out the correct line number. Use the default: RS232, if we are out. Generally, if anyone needs to set the interface types, a module parameter is past the last thing that should be used for this purpose. The parameters' description says it's for ISA cards anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20200417105959.15201-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uartZou Wei1-1/+3
This patch fixes below error reported by coccicheck drivers/tty/serial/bcm63xx_uart.c:848:2-8: ERROR: missing clk_put; clk_get on line 842 and execution via conditional on line 846 Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1587472306-105155-1-git-send-email-zou_wei@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23vt: don't hardcode the mem allocation upper boundNicolas Pitre1-1/+1
The code in vc_do_resize() bounds the memory allocation size to avoid exceeding MAX_ORDER down the kzalloc() call chain and generating a runtime warning triggerable from user space. However, not only is it unwise to use a literal value here, but MAX_ORDER may also be configurable based on CONFIG_FORCE_MAX_ZONEORDER. Let's use KMALLOC_MAX_SIZE instead. Note that prior commit bb1107f7c605 ("mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER") the KMALLOC_MAX_SIZE value could not be relied upon. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Cc: <stable@vger.kernel.org> # v4.10+ Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2003281702410.2671@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23tty: serial: owl: add "much needed" clk_prepare_enable()Amit Singh Tomar1-0/+7
commit 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") breaks the UART on Cubieboard7-lite (based on S700 SoC), This is due to the fact that generic clk routine clk_disable_unused() disables the gate clks, and that in turns disables OWL UART (but UART driver never enables it). To prove this theory, Andre suggested to use "clk_ignore_unused" in kernel commnd line and it worked (Kernel happily lands into RAMFS world :)). This commit fix this up by adding clk_prepare_enable(). Fixes: 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1587067917-1400-1-git-send-email-amittomer25@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23vt: don't use kmalloc() for the unicode screen bufferNicolas Pitre1-2/+3
Even if the actual screen size is bounded in vc_do_resize(), the unicode buffer is still a little more than twice the size of the glyph buffer and may exceed MAX_ORDER down the kmalloc() path. This can be triggered from user space. Since there is no point having a physically contiguous buffer here, let's avoid the above issue as well as reducing pressure on high order allocations by using vmalloc() instead. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Cc: <stable@vger.kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2003282214210.2671@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBIKefeng Wang2-2/+2
As shown in SBI v0.2, the legacy console SBI functions (sbi_console_getchar() and sbi_console_putchar()) are expected to be deprecated; they have no replacement. Let's HVC_RISCV_SBI and SERIAL_EARLYCON_RISCV_SBI depends on RISCV_SBI_V01. Fixes: efca13989250 ("RISC-V: Introduce a new config for SBI v0.1") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-04-20tty/sysrq: Export sysrq_mask(), sysrq_toggle_support()Dmitry Safonov1-0/+2
Build fix for serial_core being module: ERROR: modpost: "sysrq_toggle_support" [drivers/tty/serial/serial_core.ko] undefined! ERROR: modpost: "sysrq_mask" [drivers/tty/serial/serial_core.ko] undefined! Fixes: eaee41727e6d ("sysctl/sysrq: Remove __sysrq_enabled copy") Cc: Jiri Slaby <jslaby@suse.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20200420172317.599611-1-dima@arista.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16serial: sh-sci: Make sure status register SCxSR is read in correct sequenceKazuhiro Fujita1-3/+10
For SCIF and HSCIF interfaces the SCxSR register holds the status of data that is to be read next from SCxRDR register, But where as for SCIFA and SCIFB interfaces SCxSR register holds status of data that is previously read from SCxRDR register. This patch makes sure the status register is read depending on the port types so that errors are caught accordingly. Cc: <stable@vger.kernel.org> Signed-off-by: Kazuhiro Fujita <kazuhiro.fujita.jg@renesas.com> Signed-off-by: Hao Bui <hao.bui.yg@renesas.com> Signed-off-by: KAZUMI HARADA <kazumi.harada.rh@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1585333048-31828-1-git-send-email-kazuhiro.fujita.jg@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16serial: sunhv: Initialize lock for non-registered consoleAndy Shevchenko1-0/+3
The commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") changed a bit logic behind lock initialization since for most of the console driver it's supposed to have lock already initialized even if console is not enabled. However, it's not the case for Sparc HV console. Initialize lock explicitly in the ->probe(). Note, there is still an open question should or shouldn't not this driver register console properly. Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Reported-by: Anatoly Pugachev <matorola@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Link: https://lore.kernel.org/r/20200402172026.79478-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Register own uart console and driver structures"Michal Simek1-55/+40
This reverts commit 024ca329bfb9a948f76eaff3243e21b7e70182f2. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Move Port ID to device data structure"Michal Simek1-11/+9
This reverts commit bed25ac0e2b6ab8f9aed2d20bc9c3a2037311800. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/eb0ec98fecdca9b79c1a3ac0c30c668b6973b193.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Change uart ID port allocation"Michal Simek1-98/+13
This reverts commit ae1cca3fa3478be92948dbbcd722390272032ade. With setting up NR_PORTS to 16 to be able to use serial2 and higher aliases and don't loose functionality which was intended by these changes. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/a94931b65ce0089f76fb1fe6b446a08731bff754.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES"Michal Simek1-4/+2
This reverts commit 2088cfd882d0403609bdf426e9b24372fe1b8337. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/dac3898e3e32d963f357fb436ac9a7ac3cbcf933.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Fix error path when alloc failed"Michal Simek1-4/+2
This reverts commit 32cf21ac4edd6c0d5b9614368a83bcdc68acb031. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Use the same dynamic major number for all ports"Michal Simek1-3/+2
This reverts commit ab262666018de6f4e206b021386b93ed0c164316. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/14a565fc1e14a5ec6cc6a6710deb878ae8305f22.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Fix uartps_major handling"Michal Simek1-7/+1
This reverts commit 5e9bd2d70ae7c00a95a22994abf1eef728649e64. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/310999ab5342f788a7bc1b0e68294d4f052cad07.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-05Merge tag 'powerpc-5.7-1' of ↵Linus Torvalds1-3/+18
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ...
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds3-91/+89
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-03-31Merge tag 'tty-5.7-rc1' of ↵Linus Torvalds56-1352/+1998
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues" * tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits) serial: 8250: Optimize irq enable after console write serial: 8250: Fix rs485 delay after console write vt: vt_ioctl: fix use-after-free in vt_in_use() vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console tty: serial: make SERIAL_SPRD depend on COMMON_CLK tty: serial: fsl_lpuart: fix return value checking tty: serial: fsl_lpuart: move dma_request_chan() ARM: dts: tango4: Make /serial compatible with ns16550a ARM: dts: mmp*: Make the serial ports compatible with xscale-uart ARM: dts: mmp*: Fix serial port names ARM: dts: mmp2-brownstone: Don't redeclare phandle references ARM: dts: pxa*: Make the serial ports compatible with xscale-uart ARM: dts: pxa*: Fix serial port names ARM: dts: pxa*: Don't redeclare phandle references serial: omap: drop unused dt-bindings header serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() serial: 8250: 8250_omap: Account for data in flight during DMA teardown ...
2020-03-30Merge branch 'pm-qos'Rafael J. Wysocki2-15/+13
* pm-qos: (30 commits) PM: QoS: annotate data races in pm_qos_*_value() Documentation: power: fix pm_qos_interface.rst format warning PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE Documentation: PM: QoS: Update to reflect previous code changes PM: QoS: Update file information comments PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions sound: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*() drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*() x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*() cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request() PM: QoS: Add CPU latency QoS API wrappers PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h PM: QoS: Simplify definitions of CPU latency QoS trace events ...
2020-03-27serial: 8250: Optimize irq enable after console writeLukas Wunner1-1/+2
Commit 7f9803072ff6 ("serial: 8250: Support console on software emulated rs485 ports") amended serial8250_console_write() with rs485 support, but positioned the invocation of ->rs485_stop_tx() after re-enablement of interrupts. The irq handler and ->console_write() are serialized with the port spinlock, so no problem there, but due to the rs485 delay, the irq handler may unnecessarily spin for a while. Avoid that by moving ->rs485_stop_tx() before re-enablement of interrupts, which also mirrors the order at the beginning of serial8250_console_write(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/019839cb1f61b01210b6ff9ac9f9079ca77f8411.1585319447.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-27serial: 8250: Fix rs485 delay after console writeLukas Wunner1-1/+1
Due to a silly copy-paste mistake, commit 7f9803072ff6 ("serial: 8250: Support console on software emulated rs485 ports") erroneously pauses for the duration of delay_rts_before_send after writing to the console, instead of delay_rts_after_send. Mea culpa. Fixes: 7f9803072ff6 ("serial: 8250: Support console on software emulated rs485 ports") Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/9dd67f33c90d23f7fafa3b81b1e812ddabf9ca24.1585319447.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-27vt: vt_ioctl: fix use-after-free in vt_in_use()Eric Biggers1-4/+12
vt_in_use() dereferences console_driver->ttys[i] without proper locking. This is broken because the tty can be closed and freed concurrently. We could fix this by using 'READ_ONCE(console_driver->ttys[i]) != NULL' and skipping the check of tty_struct::count. But, looking at console_driver->ttys[i] isn't really appropriate anyway because even if it is NULL the tty can still be in the process of being closed. Instead, fix it by making vt_in_use() require console_lock() and check whether the vt is allocated and has port refcount > 1. This works since following the patch "vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console" the port refcount is incremented while the vt is open. Reproducer (very unreliable, but it worked for me after a few minutes): #include <fcntl.h> #include <linux/vt.h> int main() { int fd, nproc; struct vt_stat state; char ttyname[16]; fd = open("/dev/tty10", O_RDONLY); for (nproc = 1; nproc < 8; nproc *= 2) fork(); for (;;) { sprintf(ttyname, "/dev/tty%d", rand() % 8); close(open(ttyname, O_RDONLY)); ioctl(fd, VT_GETSTATE, &state); } } KASAN report: BUG: KASAN: use-after-free in vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline] BUG: KASAN: use-after-free in vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657 Read of size 4 at addr ffff888065722468 by task syz-vt2/132 CPU: 0 PID: 132 Comm: syz-vt2 Not tainted 5.6.0-rc5-00130-g089b6d3654916 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 Call Trace: [...] vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline] vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660 [...] Allocated by task 136: [...] kzalloc include/linux/slab.h:669 [inline] alloc_tty_struct+0x96/0x8a0 drivers/tty/tty_io.c:2982 tty_init_dev+0x23/0x350 drivers/tty/tty_io.c:1334 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline] tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035 [...] Freed by task 41: [...] kfree+0xbf/0x200 mm/slab.c:3757 free_tty_struct+0x8d/0xb0 drivers/tty/tty_io.c:177 release_one_tty+0x22d/0x2f0 drivers/tty/tty_io.c:1468 process_one_work+0x7f1/0x14b0 kernel/workqueue.c:2264 worker_thread+0x8b/0xc80 kernel/workqueue.c:2410 [...] Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle") Cc: <stable@vger.kernel.org> # v3.4+ Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200322034305.210082-3-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-27vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual consoleEric Biggers2-9/+26
The VT_DISALLOCATE ioctl can free a virtual console while tty_release() is still running, causing a use-after-free in con_shutdown(). This occurs because VT_DISALLOCATE considers a virtual console's 'struct vc_data' to be unused as soon as the corresponding tty's refcount hits 0. But actually it may be still being closed. Fix this by making vc_data be reference-counted via the embedded 'struct tty_port'. A newly allocated virtual console has refcount 1. Opening it for the first time increments the refcount to 2. Closing it for the last time decrements the refcount (in tty_operations::cleanup() so that it happens late enough), as does VT_DISALLOCATE. Reproducer: #include <fcntl.h> #include <linux/vt.h> #include <sys/ioctl.h> #include <unistd.h> int main() { if (fork()) { for (;;) close(open("/dev/tty5", O_RDWR)); } else { int fd = open("/dev/tty10", O_RDWR); for (;;) ioctl(fd, VT_DISALLOCATE, 5); } } KASAN report: BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278 Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129 CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 Call Trace: [...] con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278 release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514 tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629 tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789 [...] Allocated by task 129: [...] kzalloc include/linux/slab.h:669 [inline] vc_allocate drivers/tty/vt/vt.c:1085 [inline] vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066 con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229 tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline] tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline] tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035 [...] Freed by task 130: [...] kfree+0xbf/0x1e0 mm/slab.c:3757 vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline] vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660 [...] Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle") Cc: <stable@vger.kernel.org> # v3.4+ Reported-by: syzbot+522643ab5729b0421998@syzkaller.appspotmail.com Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200322034305.210082-2-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26tty: serial: make SERIAL_SPRD depend on COMMON_CLKChunyan Zhang1-0/+1
kbuild-test reported an error: config: mips-randconfig-a001-20200321 ... >> drivers/tty/serial/sprd_serial.c:1175: undefined reference to `clk_set_parent' Because some mips Kconfig selects HAVE_CLK but not COMMON_CLK and no clk_set_parent implemented, so the error was exposed. So adding dependence on COMMON_CLK can fix this issue. Fixes: 7ba87cfec71a ("tty: serial: make SERIAL_SPRD not depend on ARCH_SPRD") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20200325081427.20312-1-zhang.lyra@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26tty: serial: fsl_lpuart: fix return value checkingMichael Walle1-1/+1
The return value of lpuart_dma_tx_request() is an negative errno on failure and zero on success. Fixes: 159381df1442f ("tty: serial: fsl_lpuart: fix DMA operation when using IOMMU") Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20200325090658.25967-2-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26tty: serial: fsl_lpuart: move dma_request_chan()Michael Walle1-13/+23
Move dma_request_chan() out of the atomic context. First this call should not be in the atomic context at all and second the dev_info_once() may cause a hang because because the console takes this spinlock, too. Fixes: 159381df1442f ("tty: serial: fsl_lpuart: fix DMA operation when using IOMMU") Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Tested-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lore.kernel.org/r/20200325090658.25967-1-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: omap: drop unused dt-bindings headerUwe Kleine-König1-2/+0
The definitons in the dt-binding's gpio header only contains some constants to be used in device trees. It is not relevant for omap-serial (as the gpio API hides the details) and in fact unused so it can just be dropped. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20200321204031.30369-1-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCsVignesh Raghavendra1-12/+86
UART on K3 SoCs has configurable RX timeout behavior (controlled via EFR2) and better DMA integration. This allows to transfer as larger amount data per DMA transfer compared to older SoCs. Add support for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-7-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMAVignesh Raghavendra1-1/+1
As per Advisory 27 of AM437x Silicon errata document, Spurious UART interrupts may occur when DMA mode (FCR.DMA_MODE) is enabled. The Interrupt Controller flags that a UART interrupt has occurred; however, the associated IT_PENDING bit remains set to 1, indicating that no interrupt is pending. Acknowledge the spurious interrupts for every occurrence as workaround. Errata is applicable to all TI SoCs with this IP. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-6-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger infoVignesh Raghavendra1-21/+61
Although same 8250 compliant UART IP is reused across different SoC, their integration wrt DMA varies greatly across SoCs. Therefore, different SoC may need to use different FIFO trigger level for DMA event and DMA configuration parameters. Provide a way to pass this information via driver data. This is required to support UART DMA on AM654/J721e SoCs. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-5-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete()Peter Ujfalusi1-10/+5
Caller functions of __dma_rx_do_complete() already hold rx_dma_lock. Therefore move locking out of the function to avoid need to release and reacquire lock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-4-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250: 8250_omap: Account for data in flight during DMA teardownVignesh Raghavendra1-4/+23
Take into account data stuck in DMA internal buffers before pushing data to higher layer. dma_tx_state has "in_flight_bytes" member that provides this information. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-3-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeoutVignesh Raghavendra1-2/+4
Terminate and flush DMA internal buffers, before pushing RX data to higher layer. Otherwise, this will lead to data corruption, as driver would end up pushing stale buffer data to higher layer while actual data is still stuck inside DMA hardware and has yet not arrived at the memory. While at that, replace deprecated dmaengine_terminate_all() with dmaengine_terminate_async(). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-2-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250_omap: Fix sleeping function called from invalid context during ↵Peter Ujfalusi1-1/+1
probe When booting j721e the following bug is printed: [ 1.154821] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 [ 1.154827] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 12, name: kworker/0:1 [ 1.154832] 3 locks held by kworker/0:1/12: [ 1.154836] #0: ffff000840030728 ((wq_completion)events){+.+.}, at: process_one_work+0x1d4/0x6e8 [ 1.154852] #1: ffff80001214fdd8 (deferred_probe_work){+.+.}, at: process_one_work+0x1d4/0x6e8 [ 1.154860] #2: ffff00084060b170 (&dev->mutex){....}, at: __device_attach+0x38/0x138 [ 1.154872] irq event stamp: 63096 [ 1.154881] hardirqs last enabled at (63095): [<ffff800010b74318>] _raw_spin_unlock_irqrestore+0x70/0x78 [ 1.154887] hardirqs last disabled at (63096): [<ffff800010b740d8>] _raw_spin_lock_irqsave+0x28/0x80 [ 1.154893] softirqs last enabled at (62254): [<ffff800010080c88>] _stext+0x488/0x564 [ 1.154899] softirqs last disabled at (62247): [<ffff8000100fdb3c>] irq_exit+0x114/0x140 [ 1.154906] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.0-rc6-next-20200318-00094-g45e4089b0bd3 #221 [ 1.154911] Hardware name: Texas Instruments K3 J721E SoC (DT) [ 1.154917] Workqueue: events deferred_probe_work_func [ 1.154923] Call trace: [ 1.154928] dump_backtrace+0x0/0x190 [ 1.154933] show_stack+0x14/0x20 [ 1.154940] dump_stack+0xe0/0x148 [ 1.154946] ___might_sleep+0x150/0x1f0 [ 1.154952] __might_sleep+0x4c/0x80 [ 1.154957] wait_for_completion_timeout+0x40/0x140 [ 1.154964] ti_sci_set_device_state+0xa0/0x158 [ 1.154969] ti_sci_cmd_get_device_exclusive+0x14/0x20 [ 1.154977] ti_sci_dev_start+0x34/0x50 [ 1.154984] genpd_runtime_resume+0x78/0x1f8 [ 1.154991] __rpm_callback+0x3c/0x140 [ 1.154996] rpm_callback+0x20/0x80 [ 1.155001] rpm_resume+0x568/0x758 [ 1.155007] __pm_runtime_resume+0x44/0xb0 [ 1.155013] omap8250_probe+0x2b4/0x508 [ 1.155019] platform_drv_probe+0x50/0xa0 [ 1.155023] really_probe+0xd4/0x318 [ 1.155028] driver_probe_device+0x54/0xe8 [ 1.155033] __device_attach_driver+0x80/0xb8 [ 1.155039] bus_for_each_drv+0x74/0xc0 [ 1.155044] __device_attach+0xdc/0x138 [ 1.155049] device_initial_probe+0x10/0x18 [ 1.155053] bus_probe_device+0x98/0xa0 [ 1.155058] deferred_probe_work_func+0x74/0xb0 [ 1.155063] process_one_work+0x280/0x6e8 [ 1.155068] worker_thread+0x48/0x430 [ 1.155073] kthread+0x108/0x138 [ 1.155079] ret_from_fork+0x10/0x18 To fix the bug we need to first call pm_runtime_enable() prior to any pm_runtime calls. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200320125200.6772-1-peter.ujfalusi@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250: 8250_omap: Fix throttle to call stop_rx()Vignesh Raghavendra1-3/+2
Call stop_rx() to halt reception when throttle is requested. Update unthrottle callback to restart reception. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319103230.16867-3-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: 8250_port: Don't service RX FIFO if throttledVignesh Raghavendra1-1/+15
When port's throttle callback is called, it should stop pushing any more data into TTY buffer to avoid buffer overflow. This means driver has to stop HW from receiving more data and assert the HW flow control. For UARTs with auto HW flow control (such as 8250_omap) manual assertion of flow control line is not possible and only way is to allow RX FIFO to fill up, thus trigger auto HW flow control logic. Therefore make sure that 8250 generic IRQ handler does not drain data when port is stopped (i.e UART_LSR_DR is unset in read_status_mask). Not servicing, RX FIFO would trigger auto HW flow control when FIFO occupancy reaches preset threshold, thus halting RX. Since, error conditions in UART_LSR register are cleared just by reading the register, data has to be drained in case there are FIFO errors, else error information will lost. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319103230.16867-2-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: uartps: Add TACTIVE check in cdns_uart_tx_empty functionRaviteja Narayanam1-2/+2
Make sure that all bytes are transmitted out of Uart by monitoring CDNS_UART_SR_TACTIVE bit as well. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Maarten Brock <m.brock@vanmierlo.com> Link: https://lore.kernel.org/r/e2514818af5973be291cc117d07739f068b71639.1584610774.git.shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: uartps: Remove unconditional wait inside set_termiosRaviteja Narayanam1-14/+2
set_termios function should not wait for the transmit FIFO empty (CDNS_UART_SR_TXEMPTY) unconditionally. The tty layer takes care of it based on the parameter passed (TCSANOW/TCSADRAIN/TCSAFLUSH). Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/536e190dd5bbb474007a67e6323c048288942a28.1584610774.git.shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-23Merge 5.6-rc7 into tty-nextGreg Kroah-Hartman1-8/+6
We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-23Merge 5.6-rc7 into char-misc-nextGreg Kroah-Hartman1-8/+6
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: fix compat TIOCGSERIAL checking wrong function ptrEric Biggers1-1/+1
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start checking for the presence of the ->set_serial function pointer rather than ->get_serial. This appears to be a copy-and-paste error, since ->get_serial is the function pointer that is called as well as the pointer that is checked by the non-compat version of TIOCGSERIAL. Fix this by checking the correct function pointer. Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200224182044.234553-3-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: fix compat TIOCGSERIAL leaking uninitialized memoryEric Biggers1-1/+3
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start copying a whole 'serial_struct32' to userspace rather than individual fields, but failed to initialize all padding and fields -- namely the hole after the 'iomem_reg_shift' field, and the 'reserved' field. Fix this by initializing the struct to zero. [v2: use sizeof, and convert the adjacent line for consistency.] Reported-by: syzbot+8da9175e28eadcb203ce@syzkaller.appspotmail.com Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200224182044.234553-2-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: drop outdated comments about release_tty() lockingEric Biggers1-6/+2
The current version of the TTY code unlocks the tty_struct(s) before release_tty() rather than after. Moreover, tty_unlock_pair() no longer exists. Thus, remove the outdated comments regarding tty_unlock_pair(). Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200224073359.292795-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: n_tracesink: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file related to Kernel driver API to route trace data. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Link: https://lore.kernel.org/r/20200302143642.GA3335@nishad Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: hvc: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file related to the HVC driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Link: https://lore.kernel.org/r/20200301170419.GA7125@nishad Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: nozomi: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-34/+33
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Also rewrite the code in a standard if-form instead of ugly conditional operators. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200311092905.24362-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: serial: pch_uart: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-11/+11
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200311092930.24433-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 21:34:41 +0000