summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2015-06-26Merge tag 'staging-4.2-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big, really big, staging tree patches for 4.2-rc1. Loads of stuff in here, almost all just coding style fixes / churn, and a few new drivers as well, one of which I just disabled from the build a few minutes ago due to way too many build warnings. Other than the one "disable this driver" patch, all of these have been in linux-next for quite a while with no reported issues" * tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits) staging: wilc1000: disable driver due to build warnings Staging: rts5208: fix CHANGE_LINK_STATE value Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs Staging: sm750fb: modedb.h: Shorten lines to under 80 characters Staging: sm750fb: modedb.h: Replace spaces with tabs staging: comedi: addi_apci_3120: rename 'this_board' variables staging: comedi: addi_apci_1516: rename 'this_board' variables staging: comedi: ni_atmio: cleanup ni_getboardtype() staging: comedi: vmk80xx: sanity check context used to get the boardinfo staging: comedi: vmk80xx: rename 'boardinfo' variables staging: comedi: dt3000: rename 'this_board' variables staging: comedi: adv_pci_dio: rename 'this_board' variables staging: comedi: cb_pcidas64: rename 'thisboard' variables staging: comedi: cb_pcidas: rename 'thisboard' variables staging: comedi: me4000: rename 'thisboard' variables ...
2015-06-25Merge tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linuxLinus Torvalds2-22/+20
Pull Renesas H8/300 architecture re-introduction from Yoshinori Sato. We dropped arch/h8300 two years ago as stale and old, this is a new and more modern rewritten arch support for the same architecture. * tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux: (27 commits) h8300: fix typo. h8300: Always build dtb h8300: Remove ARCH_WANT_IPC_PARSE_VERSION sh-sci: Get register size from platform device clk: h8300: fix error handling in h8s2678_pll_clk_setup() h8300: Symbol name fix h8300: devicetree source h8300: configs h8300: IRQ chip driver h8300: clocksource h8300: clock driver h8300: Build scripts h8300: library functions h8300: Memory management h8300: miscellaneous functions h8300: process helpers h8300: compressed image support h8300: Low level entry h8300: kernel startup h8300: Interrupt and exceptions ...
2015-06-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+2
Merge first patchbomb from Andrew Morton: - a few misc things - ocfs2 udpates - kernel/watchdog.c feature work (took ages to get right) - most of MM. A few tricky bits are held up and probably won't make 4.2. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (91 commits) mm: kmemleak_alloc_percpu() should follow the gfp from per_alloc() mm, thp: respect MPOL_PREFERRED policy with non-local node tmpfs: truncate prealloc blocks past i_size mm/memory hotplug: print the last vmemmap region at the end of hot add memory mm/mmap.c: optimization of do_mmap_pgoff function mm: kmemleak: optimise kmemleak_lock acquiring during kmemleak_scan mm: kmemleak: avoid deadlock on the kmemleak object insertion error path mm: kmemleak: do not acquire scan_mutex in kmemleak_do_cleanup() mm: kmemleak: fix delete_object_*() race when called on the same memory block mm: kmemleak: allow safe memory scanning during kmemleak disabling memcg: convert mem_cgroup->under_oom from atomic_t to int memcg: remove unused mem_cgroup->oom_wakeups frontswap: allow multiple backends x86, mirror: x86 enabling - find mirrored memory ranges mm/memblock: allocate boot time data structures from mirrored memory mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute mm: do not ignore mapping_gfp_mask in page cache allocation paths mm/cma.c: fix typos in comments mm/oom_kill.c: print points as unsigned int mm/hugetlb: handle races in alloc_huge_page and hugetlb_reserve_pages ...
2015-06-24Merge branch 'for-linus' of ↵Linus Torvalds2-44/+131
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Thanks to Samuel Thibault input device (keyboard) LEDs are no longer hardwired within the input core but use LED subsystem and so allow use of different triggers; Hans de Goede did a large update for the ALPS touchpad driver; we have new TI drv2665 haptics driver and DA9063 OnKey driver, and host of other drivers got various fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits) Input: pixcir_i2c_ts - fix receive error MAINTAINERS: remove non existent input mt git tree Input: improve usage of gpiod API tty/vt/keyboard: define LED triggers for VT keyboard lock states tty/vt/keyboard: define LED triggers for VT LED states Input: export LEDs as class devices in sysfs Input: cyttsp4 - use swap() in cyttsp4_get_touch() Input: goodix - do not explicitly set evbits in input device Input: goodix - export id and version read from device Input: goodix - fix variable length array warning Input: goodix - fix alignment issues Input: add OnKey driver for DA9063 MFD part Input: elan_i2c - add product IDs FW names Input: elan_i2c - add support for multi IC type and iap format Input: focaltech - report finger width to userspace tty: remove platform_sysrq_reset_seq Input: synaptics_i2c - use proper boolean values Input: psmouse - use true instead of 1 for boolean values Input: cyapa - fix a few typos in comments Input: stmpe-ts - enforce device tree only mode ...
2015-06-24mm: oom_kill: simplify OOM killer lockingJohannes Weiner1-0/+2
The zonelist locking and the oom_sem are two overlapping locks that are used to serialize global OOM killing against different things. The historical zonelist locking serializes OOM kills from allocations with overlapping zonelists against each other to prevent killing more tasks than necessary in the same memory domain. Only when neither tasklists nor zonelists from two concurrent OOM kills overlap (tasks in separate memcgs bound to separate nodes) are OOM kills allowed to execute in parallel. The younger oom_sem is a read-write lock to serialize OOM killing against the PM code trying to disable the OOM killer altogether. However, the OOM killer is a fairly cold error path, there is really no reason to optimize for highly performant and concurrent OOM kills. And the oom_sem is just flat-out redundant. Replace both locking schemes with a single global mutex serializing OOM kills regardless of context. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24Merge tag 'powerpc-4.2-1' of ↵Linus Torvalds1-23/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - disable the 32-bit vdso when building LE, so we can build with a 64-bit only toolchain. - EEH fixes from Gavin & Richard. - enable the sys_kcmp syscall from Laurent. - sysfs control for fastsleep workaround from Shreyas. - expose OPAL events as an irq chip by Alistair. - MSI ops moved to pci_controller_ops by Daniel. - fix for kernel to userspace backtraces for perf from Anton. - merge pseries and pseries_le defconfigs from Cyril. - CXL in-kernel API from Mikey. - OPAL prd driver from Jeremy. - fix for DSCR handling & tests from Anshuman. - Powernv flash mtd driver from Cyril. - dynamic DMA Window support on powernv from Alexey. - LLVM clang fixes & workarounds from Anton. - reworked version of the patch to abort syscalls when transactional. - fix the swap encoding to support 4TB, from Aneesh. - various fixes as usual. - Freescale updates from Scott: Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup. * tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits) cxl: Fix typo in debug print cxl: Add CXL_KERNEL_API config option powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma() powerpc/mm: Change the swap encoding in pte. powerpc/mm: PTE_RPN_MAX is not used, remove the same powerpc/tm: Abort syscalls in active transactions powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off powerpc/include: Add opal-prd to installed uapi headers powerpc/powernv: fix construction of opal PRD messages powerpc/powernv: Increase opal-irqchip initcall priority powerpc: Make doorbell check preemption safe powerpc/powernv: pnv_init_idle_states() should only run on powernv macintosh/nvram: Remove as unused powerpc: Don't use gcc specific options on clang powerpc: Don't use -mno-strict-align on clang powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it powerpc: Only use -mabi=altivec if toolchain supports it powerpc: Fix duplicate const clang warning in user access code vfio: powerpc/spapr: Support Dynamic DMA windows vfio: powerpc/spapr: Register memory and define IOMMU v2 ...
2015-06-23Merge tag 'gpio-v4.2-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio updates from Linus Walleij: "This is the big bulk of GPIO changes queued for the v4.2 kernel series: - a big set of cleanups to the aged sysfs interface from Johan Hovold. To get these in, v4.1-rc3 was merged into the tree as the first patch in that series had to go into stable. This makes the locking much more fine-grained (get rid of the "big GPIO lock(s)" and store states in the GPIO descriptors. - rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to avoid confusions. - New drivers for: * NXP LPC18xx (currently LPC1850) * NetLogic XLP * Broadcom STB SoC's * Axis ETRAXFS * Zynq Ultrascale+ (subdriver) - ACPI: * make it possible to retrieve GpioInt resources from a GPIO device using acpi_dev_gpio_irq_get() * merge some dependent I2C changes exploiting this. * support the ARM X-Gene GPIO standby driver. - make it possible for the generic GPIO driver to read back the value set registers to reflect current status. - loads of OMAP IRQ handling fixes. - incremental improvements to Kona, max732x, OMAP, MXC, RCAR, PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x. - janitorial (constification, checkpatch cleanups)" * tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: Fix checkpatch.pl issues gpio: pcf857x: handle only enabled irqs gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use gpio: improve error reporting on own descriptors gpio: promote own request failure to pr_err() gpio: Added support to Zynq Ultrascale+ MPSoC gpio: add ETRAXFS GPIO driver fix documentation after renaming gpiod_set_array to gpiod_set_array_value gpio: Add GPIO support for Broadcom STB SoCs gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver gpio: tb10x: Drop unneeded free_irq() call gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip gpio: stp-xway: Use the of_property_read_u32 helper gpio: pcf857x: Check for irq_set_irq_wake() failures gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs gpio: Prevent an integer overflow in the pca953x driver gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly gpio: omap: rework omap_gpio_request to touch only gpio specific registers gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers ...
2015-06-23sh-sci: Get register size from platform deviceYoshinori Sato1-21/+13
There is much SCI of SoC having within, and the register size is also different in everyone. So get from platform device. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2015-06-23sh-sci: Add h8300 SCIYoshinori Sato2-1/+7
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-06-16tty/vt/keyboard: define LED triggers for VT keyboard lock statesSamuel Thibault1-8/+19
In addition to defining triggers for VT LED states, let's define triggers for VT keyboard lock states, such as "kbd-shiftlock", "kbd-altgrlock", etc. This permits to fix #7063 from userland by using a modifier to implement proper CapsLock behavior and have the keyboard caps lock led show that modifier state. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-16tty/vt/keyboard: define LED triggers for VT LED statesSamuel Thibault1-24/+117
Now that input core allows controlling keyboards LEDs via standard LED subsystem triggers let's switch VT keyboard code to make use of this feature. We will define the following standard triggers: "kbd-scrollock", "kbd-numlock", "kbd-capslock", and "kbd-kanalock" which are default triggers for respective LEDs on keyboards. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-08Merge 4.1-rc7 into staging-testingGreg Kroah-Hartman6-31/+115
We want the staging tree fixes in here too to help with testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-06Merge tag 'tty-4.1-rc7' of ↵Linus Torvalds4-22/+105
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a few TTY and Serial driver fixes for reported regressions and crashes. All of these have been in linux-next with no reported problems" * tag 'tty-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: n_tty: Fix auditing support for cannonical mode serial: 8250_omap: provide complete custom startup & shutdown callbacks n_tty: Fix calculation of size in canon_copy_from_read_buf serial: imx: Fix DMA handling for IDLE condition aborts serial/amba-pl011: Unconditionally poll for FIFO space before each TX char
2015-06-02tty: remove platform_sysrq_reset_seqArnd Bergmann1-18/+1
The platform_sysrq_reset_seq code was intended as a way for an embedded platform to provide its own sysrq sequence at compile time. After over two years, nobody has started using it in an upstream kernel, and the platforms that were interested in it have moved on to devicetree, which can be used to configure the sequence without requiring kernel changes. The method is also incompatible with the way that most architectures build support for multiple platforms into a single kernel. Now the code is producing warnings when built with gcc-5.1: drivers/tty/sysrq.c: In function 'sysrq_init': drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds] key = platform_sysrq_reset_seq[i]; We could fix this, but it seems unlikely that it will ever be used, so let's just remove the code instead. We still have the option to pass the sequence either in DT, using the kernel command line, or using the /sys/module/sysrq/parameters/reset_seq file. Fixes: 154b7a489a ("Input: sysrq - allow specifying alternate reset sequence") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-01gpiolib: rename gpiod_set_array to gpiod_set_array_valueRojhalat Ibrahim1-1/+1
There have been concerns that the function names gpiod_set_array() and gpiod_get_array() might be confusing to users. One might expect gpiod_get_array() to return array values, while it is actually the array counterpart of gpiod_get(). To be consistent with the single descriptor API we could rename gpiod_set_array() to gpiod_set_array_value(). This makes some function names a bit lengthy: gpiod_set_raw_array_value_cansleep(). Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01n_tty: Fix auditing support for cannonical modeLaura Abbott1-3/+14
Commit 32f13521ca68bc624ff6effc77f308a52b038bf0 ("n_tty: Line copy to user buffer in canonical mode") changed cannonical mode copying to use copy_to_user but missed adding the call to the audit framework. Add in the appropriate functions to get audit support. Fixes: 32f13521ca68 ("n_tty: Line copy to user buffer in canonical mode") Reported-by: Miloslav Trmač <mitr@redhat.com> Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01serial: 8250_omap: provide complete custom startup & shutdown callbacksSebastian Andrzej Siewior1-9/+73
The currently in-use port->startup and port->shutdown are "okay". The startup part for instance does the tiny omap extra part and invokes serial8250_do_startup() for the remaining pieces. The workflow in serial8250_do_startup() is okay except for the part where UART_RX is read without a check if there is something to read. I tried to workaround it in commit 0aa525d11859 ("tty: serial: 8250_core: read only RX if there is something in the FIFO") but then reverted it later in commit ca8bb4aefb9 ("serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO""). This is the second attempt to get it to work on older OMAPs without breaking other chips this time Peter Hurley suggested to pull in the few needed lines from serial8250_do_startup() and drop everything else that is not required including making it simpler like using just request_irq() instead the chain handler like it is doing now. So lets try that. Fixes: ca8bb4aefb93 ("serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO"") Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31staging: goldfish: Fix pointer cast for 32 bitsPeter Senna Tschudin1-2/+2
As the first argument of gf_write64() was of type unsigned long, and as some calls to gf_write64() were casting the first argument from void * to u64 the compiler and/or sparse were printing warnings for casts of wrong sizes when compiling for i386. This patch changes the type of the first argument of gf_write64() to const void *, and update calls to the function. This change fixed the warnings and allowed to remove casts from 3 calls to gf_write64(). In addition gf_write64() was renamed to gf_write_ptr() as the name was misleading because it only writes 32 bits on 32 bit systems. gf_write_dma_addr() was added to handle dma_addr_t values which is used at drivers/staging/goldfish/goldfish_audio.c. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-26ttyFDC: Fix to use native endian MMIO readsJames Hogan1-8/+9
The MIPS Common Device Memory Map (CDMM) is internal to the core and has native endianness. There is therefore no need to byte swap the accesses on big endian targets, so convert the Fast Debug Channel (FDC) TTY driver to use __raw_readl()/__raw_writel() rather than ioread32()/iowrite32(). Fixes: 4cebec609aea ("TTY: Add MIPS EJTAG Fast Debug Channel TTY driver") Fixes: c2d7ef51d731 ("ttyFDC: Implement KGDB IO operations.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9905/ Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-24n_tty: Fix calculation of size in canon_copy_from_read_bufMark Tomlinson1-2/+2
There was a hardcoded value of 4096 which should have been N_TTY_BUF_SIZE. This caused reads from tty to fail with EFAULT when they shouldn't have done if N_TTY_BUF_SIZE was declared to be something other than 4096. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24serial: imx: Fix DMA handling for IDLE condition abortsPhilipp Zabel1-0/+8
The driver configures the IDLE condition to interrupt the SDMA engine. Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this caused repeated 1-byte DMA transfers, regardless of available data in the RX FIFO. Also, when returning due to the IDLE condition, the UART ROM script already increased its counter, causing residue to be off by one. This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers and decreases count by when the DMA transfer was aborted due to the IDLE condition, fixing serial transfers using DMA on i.MX6Q. Reported-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24serial/amba-pl011: Unconditionally poll for FIFO space before each TX charDave Martin1-8/+8
Commit 734745caeb9f155ab58918834a8c70e83fa6afd3 serial/amba-pl011: (Activate TX IRQ passively) introduces a race which causes the driver sometimes to attempt to write a character to the TX FIFO when the FIFO is already full. The PL011 does not guarantee its behaviour when the FIFO is overfilled. In practice, this can cause duplicate and/or dropped characters to be output on the wire. The problem is common enough to be readily observable on the ARM Juno platform when the PL011 UART is used as the console and DMA is not in use. This patch fixes this problem by always polling for space before each character is written to the FIFO. This will be amended to a less brute-force approach in a later commit, but this patch should help ensure correct behaviour for now. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-22hvc: Convert to using interrupts instead of opal eventsAlistair Popple1-23/+10
Convert the opal hvc driver to use the new irqchip to register for opal events. As older firmware versions may not have device tree bindings for the interrupt parent we just use a hardcoded hwirq based on the event number. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-21Merge tag 'for-linus-4.1b-rc4-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull two xen bugfixes from David Vrabel: - fix ARM build regression. - fix VIRQ_CONSOLE related oops. * tag 'for-linus-4.1b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: don't bind non-percpu VIRQs with percpu chip xen/arm: Define xen_arch_suspend()
2015-05-19xen/events: don't bind non-percpu VIRQs with percpu chipDavid Vrabel1-1/+1
A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
2015-05-16Merge tag 'tty-4.1-rc4' of ↵Linus Torvalds8-33/+60
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here's some TTY and serial driver fixes for reported issues. All of these have been in linux-next successfully" * tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pty: Fix input race when closing tty/n_gsm.c: fix a memory leak when gsmtty is removed Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open" serial: omap: Fix error handling in probe earlycon: Revert log warnings
2015-05-10pty: Fix input race when closingPeter Hurley4-22/+50
A read() from a pty master may mistakenly indicate EOF (errno == -EIO) after the pty slave has closed, even though input data remains to be read. For example, pty slave | input worker | pty master | | | | n_tty_read() pty_write() | | input avail? no add data | | sleep schedule worker --->| | . |---> flush_to_ldisc() | . pty_close() | fill read buffer | . wait for worker | wakeup reader --->| . | read buffer full? |---> input avail ? yes |<--- yes - exit worker | copy 4096 bytes to user TTY_OTHER_CLOSED <---| |<--- kick worker | | **** New read() before worker starts **** | | n_tty_read() | | input avail? no | | TTY_OTHER_CLOSED? yes | | return -EIO Several conditions are required to trigger this race: 1. the ldisc read buffer must become full so the input worker exits 2. the read() count parameter must be >= 4096 so the ldisc read buffer is empty 3. the subsequent read() occurs before the kicked worker has processed more input However, the underlying cause of the race is that data is pipelined, while tty state is not; ie., data already written by the pty slave end is not yet visible to the pty master end, but state changes by the pty slave end are visible to the pty master end immediately. Pipeline the TTY_OTHER_CLOSED state through input worker to the reader. 1. Introduce TTY_OTHER_DONE which is set by the input worker when TTY_OTHER_CLOSED is set and either the input buffers are flushed or input processing has completed. Readers/polls are woken when TTY_OTHER_DONE is set. 2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED. 3. A new input worker is started from pty_close() after setting TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be set if the last input worker is already finished (or just about to exit). Remove tty_flush_to_ldisc(); no in-tree callers. Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311 BugLink: http://bugs.launchpad.net/bugs/1429756 Cc: <stable@vger.kernel.org> # 3.19+ Reported-by: Andy Whitcroft <apw@canonical.com> Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10tty/n_gsm.c: fix a memory leak when gsmtty is removedPan Xinhui1-3/+2
when gsmtty_remove put dlci, it will cause memory leak if dlci->port's refcount is zero. So we do the cleanup work in .cleanup callback instead. dlci will be last put in two call chains. 1) gsmld_close -> gsm_cleanup_mux -> gsm_dlci_release -> dlci_put 2) gsmld_remove -> dlci_put so there is a race. the memory leak depends on the race. In call chain 2. we hit the memory leak. below comment tells. release_tty -> tty_driver_remove_tty -> gsmtty_remove -> dlci_put -> tty_port_destructor (WARN_ON(port->itty) and return directly) | tty->port->itty = NULL; | tty_kref_put ---> release_one_tty -> gsmtty_cleanup (added by our patch) So our patch fix the memory leak by doing the cleanup work after tty core did. Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com> Fixes: dfabf7ffa30585 Cc: stable <stable@vger.kernel.org> # 3.14+ Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-09Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"Dave Martin1-1/+4
This reverts commit f2ee6dfa0e8597eea8b98d240b0033994e20d215. Jakub Kiciński observed that this patch can cause the pl011 driver to hang if if the only process with a pl011 port open is killed by a signal, pl011_shutdown() can get called with an arbitrary amount of data still in the FIFO. Calling _shutdown() with the TX FIFO non-empty is questionable behaviour and my itself be a bug. Since the affected patch was speculative anyway, and brings limited benefit, the simplest course is to remove the assumption that TXIS will always be left asserted after the port is shut down. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-08serial: omap: Fix error handling in probeSemen Protsenko1-0/+2
There is pm_qos_add_request() being executed on serial_omap_probe(), which stores "&up->pm_qos_request" from omap-serial driver to "pm_qos_array[PM_QOS_CPU_DMA_LATENCY]->constraints". If serial_omap_probe() fails after pm_qos_add_request() (e.g. on uart_add_one_port() call), pm_qos_array still keeping pm_qos_request struct from omap-serial driver, which is not valid anymore (since driver failed). This leads further to kernel crash on pm_qos_update_target(), executing from some completely different driver. We were observing this while trying to run audio playback while having one of omap-serial driver instances failed on uart_add_one_port() call: Unable to handle kernel paging request at virtual address fffffffc Backtrace: (plist_add) from (pm_qos_update_target) (pm_qos_update_target) from (pm_qos_add_request) (pm_qos_add_request) from (snd_pcm_hw_params) (snd_pcm_hw_params) from (snd_pcm_common_ioctl1) (snd_pcm_common_ioctl1) from (snd_pcm_playback_ioctl1) (snd_pcm_playback_ioctl1) from (snd_pcm_playback_ioctl) (snd_pcm_playback_ioctl) from (do_vfs_ioctl) (do_vfs_ioctl) from (SyS_ioctl) (SyS_ioctl) from (ret_fast_syscall) This patch adds pm_qos_remove_request() on fail path in serial_omap_probe() in order to fix this issue. While at it, free the wakeup settings on fail path as well, just like it's done in serial_omap_remove(). Signed-off-by: Semen Protsenko <semen.protsenko@globallogic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-08earlycon: Revert log warningsPeter Hurley1-7/+2
Log warnings meant to help diagnose problems setting up earlycon are reporting false positives for 'console='. Revert to the previous behavior which reported nothing. Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06Merge tag 'for-linus-4.1b-rc2-tag' of ↵Linus Torvalds1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - fix blkback regression if using persistent grants - fix various event channel related suspend/resume bugs - fix AMD x86 regression with X86_BUG_SYSRET_SS_ATTRS - SWIOTLB on ARM now uses frames <4 GiB (if available) so device only capable of 32-bit DMA work. * tag 'for-linus-4.1b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM hypervisor/x86/xen: Unset X86_BUG_SYSRET_SS_ATTRS on Xen PV guests xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq() xen/console: Update console event channel on resume xen/xenbus: Update xenbus event channel on resume xen/events: Clear cpu_evtchn_mask before resuming xen-pciback: Add name prefix to global 'permissive' variable xen: Suspend ticks on all CPUs during suspend xen/grant: introduce func gnttab_unmap_refs_sync() xen/blkback: safely unmap purge persistent grants
2015-05-05xen/console: Update console event channel on resumeBoris Ostrovsky1-1/+17
After a resume the hypervisor/tools may change console event channel number. We should re-query it. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-04-28serial: 8250_pci: Add support for 16 port Exar boardsSoeren Grunewald1-2/+23
The Exar XR17V358 chip usually provides only 8 ports. But two chips can be combined to act as a single 16 port chip. Therefor one chip is configured as master the second as slave by connecting the mode pin to VCC (master) or GND (slave). Then the master chip is reporting a different device-id depending on whether a slave is detected or not. The UARTs 8-15 are addressed from 0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to address all 16 ports as before. See: https://www.exar.com/common/content/document.ashx?id=1587 page 11 Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28serial: samsung: fix serial console breakRobert Baldyga1-2/+3
This patch fixes problems with serial console break. When function s3c64xx_serial_startup() was started while serial console has been working, it caused lose of characters written to TX FIFO. This effect was particularly observable with systemd, which closes serial port every time when it's not currently needed, hence function s3c64xx_serial_startup() is called quite often there. To fix this problem we avoid resetting TX FIFO if port is used as serial console. Example of broken console log: [ 1086.7 Expecting device dev-ttySAC1.device... [ 1086.[ OK ] Reached target Paths. [ 1086.756416] s[ OK ] Reached target Swap. [ 1086.776413] systemd[1]: Reached target Swap. [ 1086.776642] systemd[1]: Starting Root Slice. [ 5.53403[ OK ] Created slice Root Slice. [ 5.548433] systemd[1]: Create[ OK ] Created slice User and Session Slice. [ 5.568414] sys[ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 5.588388] s[ OK ] Listening on Delayed Shutdown Socket. [ 5.608376] sy[ OK ] Listening on Journal Socket (/dev/log). [ 5.628361] [ OK ] Listening on udev Kernel Socket. [ 5.648357] s[ OK ] Listening on udev Control Socket. [ 5.668353] s[ OK ] Listening on Journal Socket. [ 5.688366] systemd[1]: Listeni[ OK ] Created slice System Slice. [ 5.708393] Mounting Temporary Directory... [ 7139.067436] Starting prepare device daemon... [ 7139.091726] sy Starting Generate environment from /etc/profile.d... [ 5.792867] system Starting Create Static Device Nodes in /dev... [ 7848.718 Mounting Debug File System... [ 7848.7384 Mounting Configuration File System... [ 5.852 Starting Apply Kernel Variables... [ 5.8720 Starting Setup Virtual Console... [ 7848.798 Starting udev Coldplug all Devices... [ 7848.817 Starting Journal Service... [ OK ] Started Journal Service. [ 7848.854222] s[ OK ] Reached target Slices. Starting Remount Root and Kernel File Systems... [ OK ] Mounted Configuration File System. Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28tty/serial: at91: maxburst was missing for dma transfersLudovic Desroches1-0/+2
Maxburst was not set when doing the dma slave configuration. This value is checked by the recently introduced xdmac. It causes an error when doing the slave configuration and so prevents from using dma. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> # 3.12 and later Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28serial: of-serial: Remove device_type = "serial" registrationMichal Simek1-1/+0
Do not probe all serial drivers by of_serial.c which are using device_type = "serial"; property. Only drivers which have valid compatible strings listed in the driver should be probed. When PORT_UNKNOWN is setup probe will fail anyway. Arnd quotation about driver historical background: "when I wrote that driver initially, the idea was that it would get used as a stub to hook up all other serial drivers but after that, the common code learned to create platform devices from DT" This patch fix the problem with on the system with xilinx_uartps and 16550a where of_serial failed to register for xilinx_uartps and because of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking for irq with request_irq() EINVAL is returned. Signed-off-by: Michal Simek <michal.simek@xilinx.com> CC: <stable@vger.kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28serial: xilinx: Use platform_get_irq to get irq description structureMichal Simek2-11/+12
For systems with CONFIG_SERIAL_OF_PLATFORM=y and device_type = "serial"; property in DT of_serial.c driver maps and unmaps IRQ (because driver probe fails). Then a driver is called but irq mapping is not created that's why driver is failing again in again on request_irq(). Based on this use platform_get_irq() instead of platform_get_resource() which is doing irq_desc allocation and driver itself can request IRQ. Fix both xilinx serial drivers in the tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28serial: core: Fix kernel-doc build warningsPeter Hurley1-1/+1
Fix uart_console_write() kernel-doc build warnings. Warning(drivers/tty/serial/serial_core.c:1778): No description found for parameter 'putchar' Warning(drivers/tty/serial/serial_core.c:1778): Excess function parameter 'write' description in 'uart_console_write' Fixes: 1cfe42b7fd29 ("serial: core: Fix kernel doc for uart_console_write()") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28tty: Re-add external interface for tty_set_termios()Frederic Danis1-1/+2
This is needed by Bluetooth hci_uart module to be able to change speed of Bluetooth controller and local UART. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-24Merge tag 'devicetree-for-4.1' of ↵Linus Torvalds3-1/+27
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull second batch of devicetree updates from Rob Herring: "As Grant mentioned in the first devicetree pull request, here is the 2nd batch of DT changes for 4.1. The main remaining item here is the endianness bindings and related 8250 driver support. - DT endianness specification bindings - big-endian 8250 serial support - DT overlay unittest updates - various DT doc updates - compile fixes for OF_IRQ=n" * tag 'devicetree-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: frv: add io{read,write}{16,32}be functions mn10300: add io{read,write}{16,32}be functions Documentation: DT bindings: add doc for Altera's SoCFPGA platform of: base: improve of_get_next_child() kernel-doc Doc: dt: arch_timer: discourage clock-frequency use of: unittest: overlay: Keep track of created overlays of/fdt: fix allocation size for device node path serial: of_serial: Support big-endian register accesses serial: 8250: Add support for big-endian MMIO accesses of: Document {little,big,native}-endian bindings of/fdt: Add endianness helper function for early init code of: Add helper function to check MMIO register endianness of/fdt: Remove "reg" data prints from early_init_dt_scan_memory of: add vendor prefix for Artesyn of: Add dummy of_irq_to_resource_table() for IRQ_OF=n of: OF_IRQ should depend on IRQ_DOMAIN
2015-04-21Merge tag 'tty-4.1-rc1' of ↵Linus Torvalds52-4438/+1442
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver update for 4.1-rc1. It was delayed for a bit due to some questions surrounding some of the console command line parsing changes that are in here. There's still one tiny regression for people who were previously putting multiple console command lines and expecting them all to be ignored for some odd reason, but Peter is working on fixing that. If not, I'll send a revert for the offending patch, but I have faith that Peter can address it. Other than the console work here, there's the usual serial driver updates and changes, and a buch of 8250 reworks to try to make that driver easier to maintain over time, and have it support more devices in the future. All of these have been in linux-next for a while" * tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) n_gsm: Drop unneeded cast on netdev_priv sc16is7xx: expose RTS inversion in RS-485 mode serial: 8250_pci: port failed after wakeup from S3 earlycon: 8250: Document kernel command line options earlycon: 8250: Fix command line regression earlycon: Fix __earlycon_table stride tty: clean up the tty time logic a bit serial: 8250_dw: only get the clock rate in one place serial: 8250_dw: remove useless ACPI ID check dmaengine: hsu: move memory allocation to GFP_NOWAIT dmaengine: hsu: remove redundant pieces of code serial: 8250_pci: add Intel Tangier support dmaengine: hsu: add Intel Tangier PCI ID serial: 8250_pci: replace switch-case by formula for Intel MID serial: 8250_pci: replace switch-case by formula tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1 serial: jsm: some off by one bugs serial: xuartps: Fix check in console_setup(). serial: xuartps: Get rid of register access macros. serial: xuartps: Fix iobase use. ...
2015-04-17Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-0/+1351
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
2015-04-14Merge tag 'pm+acpi-4.1-rc1' of ↵Linus Torvalds1-12/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups all over, although there are a few items that sort of fall into the new feature category. First off, we have new callbacks for PM domains that should help us to handle some issues related to device initialization in a better way. There also is some consolidation in the unified device properties API area allowing us to use that inferface for accessing data coming from platform initialization code in addition to firmware-provided data. We have some new device/CPU IDs in a few drivers, support for new chips and a new cpufreq driver too. Specifics: - Generic PM domains support update including new PM domain callbacks to handle device initialization better (Russell King, Rafael J Wysocki, Kevin Hilman) - Unified device properties API update including a new mechanism for accessing data provided by platform initialization code (Rafael J Wysocki, Adrian Hunter) - ARM cpuidle update including ARM32/ARM64 handling consolidation (Daniel Lezcano) - intel_idle update including support for the Silvermont Core in the Baytrail SOC and for the Airmont Core in the Cherrytrail and Braswell SOCs (Len Brown, Mathias Krause) - New cpufreq driver for Hisilicon ACPU (Leo Yan) - intel_pstate update including support for the Knights Landing chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi) - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann) - powernv cpufreq driver update (Shilpasri G Bhat) - devfreq update including Tegra support changes (Tomeu Vizoso, MyungJoo Ham, Chanwoo Choi) - powercap RAPL (Running-Average Power Limit) driver update including support for Intel Broadwell server chips (Jacob Pan, Mathias Krause) - ACPI device enumeration update related to the handling of the special PRP0001 device ID allowing DT-style 'compatible' property to be used for ACPI device identification (Rafael J Wysocki) - ACPI EC driver update including limited _DEP support (Lan Tianyu, Lv Zheng) - ACPI backlight driver update including a new mechanism to allow native backlight handling to be forced on non-Windows 8 systems and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede) - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu) - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger, Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki) - Fixes related to suspend-to-idle for the iTCO watchdog driver and the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu) - PM tracing support for the suspend phase of system suspend/resume transitions (Zhonghui Fu) - Configurable delay for the system suspend/resume testing facility (Brian Norris) - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) ACPI / scan: Fix NULL pointer dereference in acpi_companion_match() ACPI / scan: Rework modalias creation when "compatible" is present intel_idle: mark cpu id array as __initconst powercap / RAPL: mark rapl_ids array as __initconst powercap / RAPL: add ID for Broadwell server intel_pstate: Knights Landing support intel_pstate: remove MSR test cpufreq: fix qoriq uniprocessor build ACPI / scan: Take the PRP0001 position in the list of IDs into account ACPI / scan: Simplify acpi_match_device() ACPI / scan: Generalize of_compatible matching device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes PM / watchdog: iTCO: stop watchdog during system suspend cpufreq: hisilicon: add acpu driver ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler cpufreq: powernv: Report cpu frequency throttling intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs intel_idle: Update support for Silvermont Core in Baytrail SOC PM / devfreq: tegra: Register governor on module init ...
2015-04-14serial: of_serial: Support big-endian register accessesKevin Cernekee1-1/+2
If the device node has a "big-endian" property and 32-bit registers, tell the serial driver to use UPIO_MEM32BE instead of UPIO_MEM32. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-04-14serial: 8250: Add support for big-endian MMIO accessesKevin Cernekee2-0/+25
Add cases for UPIO_MEM32BE wherever there are currently cases handling UPIO_MEM32. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-13Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-0/+1
Pull workqueue updates from Tejun Heo: "Workqueue now prints debug information at the end of sysrq-t which should be helpful when tracking down suspected workqueue stalls. It only prints out the ones with something currently going on so it shouldn't add much output in most cases" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Reorder sysfs code percpu: Fix trivial typos in comments workqueue: dump workqueues on sysrq-t workqueue: keep track of the flushing task and pool manager workqueue: make the workqueues list RCU walkable
2015-04-13Merge branch 'pnp'Rafael J. Wysocki1-12/+1
* pnp: PNP: Avoid leaving unregistered device objects in lists PNP: Convert pnp_lock into a mutex PNP: tty/serial/8250/8250_fintek: Use module_pnp_driver to register driver PNP: platform/x86/apple-gmux: Use module_pnp_driver to register driver PNP: net/sb1000: Use module_pnp_driver to register driver PNP: media/rc: Use module_pnp_driver to register driver PNP: ide/ide-pnp: Use module_pnp_driver to register driver PNP: ata/pata_isapnp: Use module_pnp_driver to register driver PNP: tpm/tpm_infineon: Use module_pnp_driver to register driver PNP: Add helper macro for pnp_register_driver boilerplate PNP / ACPI: Use ACPI_COMPANION_SET() during initialization
2015-04-10n_gsm: Drop unneeded cast on netdev_privJulia Lawall1-5/+5
The result of netdev_priv is already implicitly cast to the type of the left side of the assignment. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; @@ x = - (T *) netdev_priv(...) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>