summaryrefslogtreecommitdiff
path: root/drivers/tty/rocket.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-17tty: Remove tty_port::close_waitPeter Hurley1-1/+0
With the removal of tty_wait_until_sent_from_close(), tty drivers no longer wait during open for parallel closes to complete (instead, the tty core waits before calling the driver open() method). Thus, the close_wait waitqueue is no longer used for waiting. Remove struct tty_port::close_wait. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17tty: Remove ASYNC_CLOSING checks in open()/hangup() methodsPeter Hurley1-12/+0
Since at least before 2.6.30, tty drivers that do not drop the tty lock while closing cannot observe ASYNC_CLOSING set while holding the tty lock; this includes the tty driver's open() and hangup() methods, since the tty core calls these methods holding the tty lock. For these drivers, waiting for ASYNC_CLOSING to clear while opening is not required, since this condition cannot occur. Similarly, even when the open() method drops and reacquires the tty lock after blocking, ASYNC_CLOSING cannot be set (again, for drivers that do not drop the tty lock while closing). Now that tty port drivers no longer drop the tty lock while closing (since 'tty: Remove tty_wait_until_sent_from_close()'), the same conditions apply: waiting for ASYNC_CLOSING to clear while opening is not required, nor is re-checking ASYNC_CLOSING after dropping and reacquiring the tty lock while blocking (eg., in *_block_til_ready()). Note: The ASYNC_CLOSING flag state is still maintained since several bitrotting drivers use it for (dubious) other purposes. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09TTY: fix misspelling of current function in stringJulia Lawall1-2/+2
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08tty: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han1-1/+1
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20TTY: rocket, fix more no-PCI warningsJiri Slaby1-147/+141
Commit "TTY: rocket, fix compilation warning" fixed a compilation warning, but there was still a problem with !CONFIG_PCI configs. So fix them for good by coupling the PCI functions together and moving them inside a common #ifdef. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15TTY: rocket, fix compilation warningJiri Slaby1-19/+21
When CONFIG_PCI is unset, we see these warnings in rocket: drivers/tty/rocket.c:3140:13: warning: 'rmSpeakerReset' defined but not used drivers/tty/rocket.c:2599:12: warning: 'sPCIInitController' defined but not used Fix those by moving the functions to one place and make them depend on CONFIG_PCI. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-18TTY: cleanup tty->hw_stopped usesJiri Slaby1-11/+8
tty->hw_stopped is set only by drivers to remember HW state. If it is never set to 1 in a particular driver, there is no need to check it in the driver at all. Remove such checks. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-18TTY: add tty_port_tty_hangup helperJiri Slaby1-6/+1
It allows for cleaning up on a considerable amount of places. They did port_get, hangup, kref_put. Now the only thing needed is to call tty_port_tty_hangup which does exactly that. And they can also decide whether to consider CLOCAL or completely ignore that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17tty: rocket: Explicitly list supported PCI IDsKevin Cernekee1-3/+25
Matching PCI_ANY_ID causes conflicts with RocketPort 2 adapters, which are supported by a different driver. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15tty: add parenthesis to macro POLL_PERIOD in rocket.cCong Ding1-1/+1
Macros should be enclosed in parenthesis Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_flip_buffer_pushJiri Slaby1-14/+11
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_insert_flip_charJiri Slaby1-1/+2
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: convert more flipping functionsJiri Slaby1-1/+1
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty pointer in many call sites. Only tty_port will be needed and hence no more tty_port_tty_get calls in those paths. Now 4 string flipping ones are on turn: * tty_insert_flip_string_flags * tty_insert_flip_string_fixed_flag * tty_prepare_flip_string * tty_prepare_flip_string_flags Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21tty: remove use of __devinitdataBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Alan Cox <alan@linux.intel.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: call tty_port_destroy in the rest of driversJiri Slaby1-0/+2
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. To be sure, the TTY buffers (and later some stuff) are gone along with the tty_port, we have to call tty_port_destroy at tear-down places. This is mostly where the structure containing a tty_port is freed. This patch does exactly that -- put tty_port_destroy at those places. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: use tty_port_register_deviceJiri Slaby1-2/+2
Currently we have no way to assign tty->port while performing tty installation. There are two ways to provide the link tty_struct => tty_port. Either by calling tty_port_install from tty->ops->install or tty_port_register_device called instead of tty_register_device when the device is being set up after connected. In this patch we modify most of the drivers to do the latter. When the drivers use tty_register_device and we have tty_port already, we switch to tty_port_register_device. So we have the tty_struct => tty_port link for free for those. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16tty: move the termios object into the ttyAlan Cox1-9/+9
This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: remove unneeded tty->index checksJiri Slaby1-3/+3
Checking if tty->index is in bounds is not needed. The tty has the index set in the initial open. This is done in get_tty_driver. And it can be only in interval <0,driver->num). So remove the tests which check exactly this interval. Some are left untouched as they check against the current backing device count. (Leaving apart that the check is racy in most of the cases.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: remove re-assignments to tty_driver membersJiri Slaby1-1/+0
All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell1-1/+1
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-19TTY: rocket, remove unused variablesJiri Slaby1-47/+0
drivers/tty/rocket.c:1393:2: warning: Value stored to 'cp' is never read cp = &info->channel; ^ ~~~~~~~~~~~~~~ drivers/tty/rocket.c:1412:2: warning: Value stored to 'cp' is never read cp = &info->channel; ^ ~~~~~~~~~~~~~~ drivers/tty/rocket.c:1730:2: warning: Value stored to 'cp' is never read cp = &info->channel; ^ ~~~~~~~~~~~~~~ drivers/tty/rocket.c:1825:3: warning: Value stored to 'str' is never read str = "8"; ^ ~~~ [many 'str' warnings stripped] drivers/tty/rocket.c:2037:3: warning: Value stored to 'board_type' is never read board_type = "RocketModem"; ^ ~~~~~~~~~~~~~ [some 'board_type' warnings stripped] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-22tty: move a number of tty drivers from drivers/char/ to drivers/tty/Greg Kroah-Hartman1-0/+3199
As planned by Arnd Bergmann, this moves the following drivers from drivers/char/ to drivers/tty/ as that's where they really belong: amiserial nozomi synclink rocket cyclades moxa mxser isicom bfin_jtag_comm Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 05:32:18 +0000