summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-orion.c
AgeCommit message (Collapse)AuthorFilesLines
2017-07-19spi: Convert to using %pOF instead of full_nameRob Herring1-2/+2
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-24spi: orion: Handle GPIO chip-selectsChris Packham1-1/+9
Some hardware designs use GPIOs to add (or supplement) the SPI chip-select so that more than one SPI slave device can be used. For this to work with the spi-orion driver the SPI_MASTER_GPIO_SS flag needs to be set (because the other outputs are gated internally by the CS) and the correct chip-select (in this case CS0) needs to be driven by the controller. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-07spi: orion: add LSB supportBastian Stender1-2/+9
The orion spi driver currently only supports the normal (i.e. MSB) mode. This patch adds LSB first mode. Also correct the comment about supported SPI modes that was left over by b15d5d7004e2 ("spi/orion: Add SPI_CHPA and SPI_CPOL support to kirkwood driver."). Signed-off-by: Bastian Stender <bst@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-08spi: mvebu: fix baudrate calculation for armada variantUwe Kleine-König1-29/+54
The calculation of SPR and SPPR doesn't round correctly at several places which might result in baud rates that are too big. For example with tclk_hz = 250000001 and target rate 25000000 it determined a divider of 10 which is wrong. Instead of fixing all the corner cases replace the calculation by an algorithm without a loop which should even be quicker to execute apart from being correct. Fixes: df59fa7f4bca ("spi: orion: support armada extended baud rates") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-13spi: orion: Fix return value check in orion_spi_probe()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30spi: orion: Add direct access modeStefan Roese1-0/+88
This patch adds support for the direct access mode to the Orion SPI driver which is used on the Marvell Armada based SoCs. In this direct mode, all data written to (or read from) a specifically mapped MBus window (linked to one SPI chip-select on one of the SPI controllers) will be transferred directly to the SPI bus. Without the need to control the SPI registers in between. This can improve the SPI transfer rate in such cases. Both, direct-read and -write mode are supported. But only the write mode has been tested. This mode especially benefits from the SPI direct mode, as the data bytes are written head-to-head to the SPI bus, without any additional addresses. One use-case for this direct write mode is, programming a FPGA bitstream image into the FPGA connected to the SPI bus at maximum speed. This mode is described in chapter "22.5.2 Direct Write to SPI" in the Marvell Armada XP Functional Spec Datasheet. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11spi: orion: On a38x, implement "50MHZ SPI AC timing" Erratum No. FE-9144572Nadav Haklai1-1/+53
Description: On Armada 38x, the device SPI interface supports frequencies of up to 50 MHz. However, due to this erratum, when the device core clock is 250 MHz and the SPI interfaces is configured for 50MHz SPI clock and CPOL=CPHA=1, there might occur data corruption on reads from the SPI device. Workaround: Work in one of the following configurations: 1. Set CPOL=CPHA=0 in "SPI Interface Configuration Register". 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1 Register" before setting the interface. [gregory.clement@free-electrons.com}: port to v4.2-rc, use is_errata_50mhz_ac instead of using a new ARMADA_380_SPI spi type. Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-05-27spi: orion: Fix extended baud rates for each Armada SoCsGregory CLEMENT1-4/+43
The commit df59fa7f4bca "spi: orion: support armada extended baud rates" made the assumptions that all the Armada SoCs supported the same maximum frequency. However, according the hardware datasheet, the maximum frequency supported by the Armada 370 SoC is tclk/4, for the Armada XP, Armada 38x and Armada 39x SoCs the limitation is 50MHz and for the Armada 375 it is tclk/15. This patch introduces new compatible strings to handle all these case. In order to be future proof a compatible was created for each SoC even if currently some SoCs seem using the same IP. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-26spi: orion: Fix maximum baud rates for Armada 370/XPGregory CLEMENT1-2/+23
The commit df59fa7f4bca "spi: orion: support armada extended baud rates" was too optimistic for the maximum baud rate that the Armada SoCs can support. According to the hardware datasheet the maximum frequency supported by the Armada 370 SoC is tclk/4. But for the Armada XP, Armada 38x and Armada 39x SoCs the limitation is 50MHz and for the Armada 375 it is tclk/15. Currently the armada-370-spi compatible is only used by the Armada 370 and the Armada XP device tree. On Armada 370, tclk cannot be higher than 200MHz. In order to be able to handle both SoCs, we can take the minimum of 50MHz and tclk/4. A proper solution is adding a compatible string for each SoC, but it can't be done as a fix for compatibility reason (we can't modify device tree that have been already released) and it will be part of a separate patch. Fixes: df59fa7f4bca (spi: orion: support armada extended baud rates) Reported-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-01-16spi: orion: Add multiple chip select support to spi-orionKen Wilson1-1/+14
This commit adds support for multiple hardware chip selects to spi-orion. Different SoCs support different number of chip selects (up to 8 on some platforms). The driver allows up to this number, and it is up to the implementer to only use the chip selects that are available. Signed-off-by: Ken Wilson <ken.wilson@opengear.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14spi: orion: Change spi-orion to use transfer_one() semantics for SPI transfersKen Wilson1-50/+23
This commit changes spi-orion to provide setup, set_cs, and transfer_one functions instead of transfer_one_message. This allows chip select support for both native and GPIO chip selects to be added. Signed-off-by: Ken Wilson <ken.wilson@opengear.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-18Merge tag 'pm+acpi-3.19-rc1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
2014-12-13spi: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki1-1/+1
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/spi/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-22spi: orion: fix potential NULL pointer de-referenceGreg Ungerer1-1/+1
It's possible that the call to of_match_device() (introduced in commit df59fa7f ["spi: orion: support armada extended baud rates"]) may return a NULL if there is no match in the device tree (or perhaps no device tree at all). Check the return pointer and set the local device data to the lowest common denominator orion device data if it is NULL. Reported-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-03Merge remote-tracking branches 'spi/topic/fsl-dspi', 'spi/topic/imx', ↵Mark Brown1-22/+94
'spi/topic/mxs', 'spi/topic/omap-100k' and 'spi/topic/orion' into spi-next
2014-10-01spi: orion: support armada extended baud ratesGreg Ungerer1-22/+94
The Armada SoC family implementation of this SPI hardware module has extended the configuration register to allow for a wider range of SPI clock rates. Specifically the Serial Baud Rate Pre-selection bits in the SPI Interface Configuration Register now also use bits 6 and 7 as well. Modify the baud rate calculation to handle these differences for the Armada case. Potentially a baud rate can be setup using a number of different pre-scalar and scalar combinations. This code tries all possible pre-scalar divisors (8 in total) to try and find the most accurate set. This change introduces (and documents) a new device tree compatible device name "armada-370-spi" to support this. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03spi: orion: Fix checkpatch issueJingoo Han1-2/+3
Fix the following checkpatch warnings. WARNING: else is not generally useful after a break or return WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-04Merge remote-tracking branches 'spi/topic/orion', 'spi/topic/pl022', ↵Mark Brown1-12/+56
'spi/topic/qup', 'spi/topic/rockchip' and 'spi/topic/rspi' into spi-next
2014-07-28spi: orion: fix incorrect handling of cell-index DT propertyThomas Petazzoni1-6/+4
In commit f814f9ac5a81 ("spi/orion: add device tree binding"), Device Tree support was added to the spi-orion driver. However, this commit reads the "cell-index" property, without taking into account the fact that DT properties are big-endian encoded. Since most of the platforms using spi-orion with DT have apparently not used anything but cell-index = <0>, the problem was not visible. But as soon as one starts using cell-index = <1>, the problem becomes clearly visible, as the master->bus_num gets a wrong value (actually it gets the value 0, which conflicts with the first bus that has cell-index = <0>). This commit fixes that by using of_property_read_u32() to read the property value, which does the appropriate endianness conversion when needed. Fixes: f814f9ac5a81 ("spi/orion: add device tree binding") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org> # v3.6+
2014-07-25spi: orion: Fix error return code in orion_spi_probe()Wei Yongjun1-1/+2
Fix to return a negative error code from the error handling case of orion_spi_reset() instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21spi: spi-orion: add runtime PM supportRussell King1-9/+50
Add trivial runtime PM support. This will only be of benefit on SoCs where the clock to the SPI interface can be shut down. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21spi: spi-orion: check return value from clk_prepare()/clk_enable()Russell King1-2/+4
clk_prepare()/clk_enable() can fail, and it's return value should be checked. Add the proper checking, and while we're here, convert to clk_prepare_enable(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-30Merge remote-tracking branches 'spi/topic/omap-uwire', 'spi/topic/omap100k', ↵Mark Brown1-68/+11
'spi/topic/omap2', 'spi/topic/orion', 'spi/topic/pl022', 'spi/topic/qup', 'spi/topic/rspi' and 'spi/topic/s3c24xx' into spi-next
2014-03-01spi: orion: Let spi core handle validating transfer lengthAxel Lin1-11/+0
spi core will handle validating transfer length since commit 4d94bd21b333 "spi: core: Validate length of the transfers in message". So remove the same checking in this driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-11spi: orion: Convert to let spi core validate xfer->bits_per_wordAxel Lin1-18/+9
Set bits_per_word_mask so spi core will reject transfers that attempt to use an unsupported bits_per_word value. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-07spi: orion: Let spi core handle checking transfer speedAxel Lin1-37/+2
Since commit a2fd4f9fa3b9 'spi: Support transfer speed checking in the core', the SPI core validates the desired speed of a given transfer against the minimum and maximum speeds supported by the controller. So we can remove the same code in this driver and let spi core handle checking the desired speed of a given transfer. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-06spi: orion: Remove unused pointer in orion_spi_write_read()Christian Engelmayer1-2/+0
Remove unused devdata pointer 'orion_spi' in function orion_spi_write_read(). Detected by Coverity: CID 1077860. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09spi: orion: Use devm_clk_get()Jingoo Han1-3/+1
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-25Merge remote-tracking branch 'spi/topic/orion' into spi-nextMark Brown1-3/+3
2013-10-15spi: orion: Fix checkpatch issueJingoo Han1-3/+3
Fix the following checkpatch warnings. WARNING: quoted string split across lines WARNING: sizeof *spi should be sizeof(*spi) Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26spi: orion: use devm_spi_register_master()Jingoo Han1-3/+1
Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01Merge remote-tracking branch 'spi/topic/orion' into spi-nextMark Brown1-17/+5
2013-07-29spi/orion: Convert to devm_ioremap_resource()Mark Brown1-17/+5
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Andrew Lunn <andrew@lunn.ch>
2013-07-29spi/orion: Directly include linux/size.hMark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-23spi: use platform_{get,set}_drvdata()Jingoo Han1-2/+2
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05spi/orion: Use module_platform_driver()Ezequiel Garcia1-11/+2
This patch reduces and simplifies initalization code by using module_platform_driver(). With this change it's necessary to remove the __init annotation to avoid section mismatch warnings. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi: Remove erroneous __init, __exit and __exit_p() references in driversGrant Likely1-4/+4
Some of the spi driver module remove hooks were annotated with __exit and referenced with __exit_p(). Presumably these were supposed to be __devinit, __devexit and __devexit_p() since __init/__exit for a probe/remove hook has never been correct. They also got missed during the big __devinit/__devexit purge since they didn't match the pattern. Remove then now to be rid of it. v2: purge __init also Reported-by: Arnd Bergmann <arnd@arndb.de> [Arnd set a patch cleaning up one, and then I found more] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely1-1/+1
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/orion: Add SPI_CHPA and SPI_CPOL support to kirkwood driver.Jason Gunthorpe1-1/+24
Support these transfer modes from the SPI layer by setting the appropriate register bits before doing the transfer. This was tested on the Marvell kirkwood SOC that uses this driver. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-08-17spi: Refactor spi-orion to use SPI framework queue.Andrew Lunn1-148/+61
Replace the deprecated master->transfer with transfer_one_message() and allow the SPI subsystem handle all the queuing of messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23spi/orion: remove uneeded spi_infoMichael Walle1-5/+0
This was formerly used to store the tclk value. This is now discovered using the clk API, rather than pass it as platform data. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23spi/orion: add device tree bindingAndrew Lunn1-0/+17
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08ARM: Orion: SPI: Add clk/clkdev support.Andrew Lunn1-7/+23
Remove now redundant tclk from SPI platform data. This makes the platform data empty, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-03-16ARM: orion: spi: remove enable_clock_fix which is not usedAndrew Lunn1-5/+0
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31spi: Add module.h to implicit users in drivers/spiPaul Gortmaker1-0/+1
We are clipping down the presence of module.h, since it was everywhere. If you really need it, you better call it out, as per this changeset. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-10spi: Convert uses of struct resource * to resource_size(ptr)Joe Perches1-3/+3
Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06spi: reorganize driversGrant Likely1-0/+573
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 04:47:49 +0000