summaryrefslogtreecommitdiff
path: root/drivers/serial/imx.c
AgeCommit message (Collapse)AuthorFilesLines
2010-08-10tty: serial - fix tty back references in termiosAlan Cox1-6/+4
One or two drivers go poking back into the tty from the termios setting routine in unsafe ways. We don't need to pass the tty down because the [ab]users are just using it to get at things they can get at anyway. This leaves low_latency setting to sort out along with set_ldisc use. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-13serial: imx.c: fix CTS trigger level lower to avoid lost charsValentin Longchamp1-1/+9
The imx CTS trigger level is left at its reset value that is 32 chars. Since the RX FIFO has 32 entries, when CTS is raised, the FIFO already is full. However, some serial port devices first empty their TX FIFO before stopping when CTS is raised, resulting in lost chars. This patch sets the trigger level lower so that other chars arrive after CTS is raised, there is still room for 16 of them. Signed-off-by: Valentin Longchamp<valentin.longchamp@epfl.ch> Tested-by: Philippe Rétornaz<philippe.retornaz@epfl.ch> Acked-by: Wolfram Sang<w.sang@pengutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-08Merge branch 'origin' into devel-stableRussell King1-3/+3
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-02Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King1-1/+1
devel-stable Conflicts: arch/arm/Makefile
2010-03-02serial: imx: fix NULL dereference Oops when pdata == NULLBaruch Siach1-3/+3
The platform code doesn't have to provide platform data to get sensible default behaviour from the imx serial driver. This patch does not handle NULL dereference in the IrDA case, which still requires a valid platform data pointer (in imx_startup()/imx_shutdown()), since I don't know whether there is a sensible default behaviour, or should the operation just fail cleanly. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Alan Cox <alan@linux.intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oskar Schirmer <os@emlix.com> Cc: Fabian Godehardt <fg@emlix.com> Cc: Daniel Glöckner <dg@emlix.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16imx-serial-excessive-status-clearing-on-break.patchAndy Green1-1/+1
cc: Sasha Hauer <kernel@pengutronix.de> We noticed that we were only able to communicate once with a GSM module per session, if we powered down the module then the serial driver was broken until reset, no traffic or /proc/interrupts activity could be seen any more. Volker noticed it was provoked by a long "break" seen on the wire when the RX was not driven during powerdown, we discovered we could kill the serial driver just by forcing RX low extenally for a little while. I saw that the processing for BREAK in the driver gets too excited and clears down all set bits in USR2, including that a character is pending. This stops all further characters getting processed. The attached one-liner makes the serial driver immortal against BREAK. Signed-off-by: Andy Green <andy.green@txtr.com> Signed-off-by: Volker Ernst <volker.ernst@txtr.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-20serial: imx: bit &/| confusionRoel Kluin1-1/+1
Since UCR1_UARTEN is defined 1, the port was always treated as enabled. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Oskar Schirmer <os@emlix.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabian Godehardt <fg@emlix.com> Cc: Daniel Glöckner <dg@emlix.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move delta_msr_wait into the tty_portAlan Cox1-2/+2
This is used by various drivers not just serial and can be extracted as commonality Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19serial: kill off uart_infoAlan Cox1-8/+8
We moved this into uart_state, now move the fields out of the separate structure and kill it off. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07i.MX serial: do not use #ifdef CONFIG_ARCH_*Sascha Hauer1-43/+22
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-16imx: Check for NULL pointer deref before calling tty_encode_baud_rateSascha Hauer1-5/+7
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-10/+3
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-11imx: serial: use tty_encode_baud_rate to set true rateOskar Schirmer1-0/+7
real baud rate may be different from the one requested. for upper layers, set the nearest value to the real rate in favour of the rate previously requested. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11imx: serial: add IrDA support to serial driverFabian Godehardt1-19/+176
Using the iMX serial driver with an IrDA device needs extra peripheral settings and specific timing depending on the transmitter circuitry used. Signed-off-by: Fabian Godehardt <fg@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11imx: serial: use rational library functionOskar Schirmer1-20/+10
for calculation of numerator and denominator used in baud rate setting, use generic library function for optimum settings. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11imx: serial: handle initialisation failure correctlyDaniel Glöckner1-1/+6
correctly de-initialise device when setting up failed, call to pdata->exit() was missing. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11imx: serial: be sure to stop xmit upon shutdownFabian Godehardt1-0/+4
needed to avoid continued transmission by hardware while software already shuts down, which might cause dangling characters to show up in hardware queues when restarting the device. Signed-off-by: Fabian Godehardt <fg@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11imx: serial: notify higher layers in case xmit IRQ was not calledFabian Godehardt1-0/+3
upper layers, namely line discipline, need to be notified when transmission of more data is possible. For spurious cases, where IRQ handling does not supply notification for sure, it is given additionally here, when data has just been transmitted and space in the buffer will most probably be available. Signed-off-by: Fabian Godehardt <fg@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11imx: serial: fix one bit field typeDaniel Glöckner1-1/+1
"have_rtscts" is assigned 1, while it is declared int:1, two's complement, which can hold 0 and -1 only. The code works, as the upper bits are cut off, and tests are done against 0 only. Nonetheless, correctly declaring the bit field as unsigned int:1 renders the code more robust. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11imx: serial: fix whitespaces (no changes in functionality)Oskar Schirmer1-25/+23
Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-03fix oops when using console=ttymxcN with N > 0Eric Lammerts1-0/+2
Signed-off-by: Eric Lammerts <eric@lammerts.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-20fix oops when using console=ttymxcN with N > 0Eric Lammerts1-0/+2
Signed-off-by: Eric Lammerts <eric@lammerts.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07[ARM] Remove arch-imx from build systemSascha Hauer1-10/+3
arch-imx is superseeded by the MXC architecture support. This patch removes arch-imx from the build system. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: remove _clk suffix from clock namesSascha Hauer1-1/+1
The context makes it clear already that these are clocks, so there's no need for such a suffix. This patch only changes the clocks actually used in the tree. The remaining clocks are renamed in the subsequent architecture specific patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18[ARM] MXC: remove dependency to other include files from irqs.hSascha Hauer1-1/+1
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and switches to more meaningful names for the irq related macros. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mx1-UART-supportPaulius Zaleckas1-3/+3
Adds support for MX1 architecture to UART driver. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02imx serial: fix rts handling for non imx1 based hardwareMarc Kleine-Budde1-1/+1
The interrupt handler for muxed interrupts (imx2/imx3) was calling the rts handling subroutine if the RTSS bit was set. (Which indicates the status of the RTS line), leading to an interrupt flood on RTS bit low. This patch fixes the problem by looking at the RTSD bit instead, indicating a change in the RTS line. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02imx serial: set RXD mux bit on i.MX27 and i.MX31Marc Kleine-Budde1-2/+13
RX in i.MX27 and i.MX31 UART lines does not work unless the "RXD Muxed Input Select" bit is set on i.MX27 and i.MX31 processors. This patch sets the missing RXD mux bit in the UCR3 register. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02i.MX serial: fix init failureDarius Augulis1-2/+8
Adds extra "out" label to probe function after calling .init form platform data. Because .init can return error number caused by gpio request fail. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-2/+2
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King1-1/+1
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-20Fix compile errors in SGI console drivers (linux-next tree)Takashi Iwai1-1/+1
The below is the patch to replace blindly all possible places, including Jack's fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de> (Reviewed and checked rather than blindly added) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-05MX2 add support for mx2 in i.MX serial driverSascha Hauer1-3/+3
add support for mx2 in i.MX serial driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05mxc: add MX3 support for i.MX internal UART driverSascha Hauer1-20/+80
This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX: introduce clock APISascha Hauer1-4/+21
This patch introduces the clock API for i.MX and converts all in-Kernel drivers to use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX UART: remove statically initialized tablesSascha Hauer1-75/+54
This patch removes the statically initialized tables from the i.MX serial driver and makes the driver fully dependent on the information provided by the platform_device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX UART: Add board specific init/exit functionsSascha Hauer1-9/+19
Add platform specific init functions. Also rename the struct platform_device dev into pdev. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX UART: do not assume 16MHz reference frequencySascha Hauer1-11/+39
We assumed a 16MHz reference frequency for the UART. While this is true for i.MX1 most of the time it is not true for MX27/MX31. Also, add handling for the ONEMS register which is present on newer versions of the chip and pass a sane minimum baudrate to uart_get_baud_rate(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-04-19Merge branch 'merge-fixes' into develRussell King1-0/+2
2008-04-17[ARM] 4999/1: <IMX UART>: fix membaseSascha Hauer1-2/+2
The membase field in struct uart_port should be the the physical address. This patch fixes it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4998/1: <IMX UART>: do not use hardcoded io space sizeSascha Hauer1-10/+15
Do not use hardcoded io space size. Instead use the information provided by the resource. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4996/1: <IMX UART>: do not enable tx empty interrupt on startupSascha Hauer1-1/+1
We are not interested in tranceiver empty interrupts until we actually sent a buffer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4995/1: <IMX UART>: Do not use URXD_CHARRDY for pollingSascha Hauer1-1/+3
Do not use the URXD_CHARRDY bit for polling for new characters. This works on i.MX1, but on MX31 the datasheet states that this bit should not be used for polling. On MX27 it is even worse, here we get a bus error when we access the read FIFO when no character is present. Instead, use USR2_RDR (receive data ready) bit. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4994/1: <IMX UART>: Move error handling into execution pathSascha Hauer1-41/+33
Move the error handling code for erroneous receive characters into execution path. This makes the code more readable and the compiler should know how to optimize this, right? Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4993/1: <IMX UART>: Trivial: Remove unused definesSascha Hauer1-4/+0
This patch removes the unused defines NR_PORTS and IMX_ISR_PASS_LIMIT in the imx serial driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-15serial: fix platform driver hotplug/coldplugKay Sievers1-0/+2
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable serial platform drivers, to re-enable auto loading. NOTE that Kconfig for some of these drivers doesn't allow modular builds, and thus doesn't match the driver source's unload support. Presumably their unload code is buggy and/or weakly tested... [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Remove pointless casts from void pointersJeff Garzik1-2/+2
Mostly in and around irq handlers. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Karsten Keil <kkeil@suse.de> Acked-by: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: David Brownell <david-b@pacbell.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20[ARM] 4481/1: Fix a bug when i.MX is compiled as a moduleSascha Hauer1-1/+1
Fix the unregistration order in the i.MX serial driver Signed-off-by: Sreekrishnan Venkateswaran <krishhna@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03[ARM] 4328/1: Move i.MX UART regs to driverSascha Hauer1-63/+205
This patch moves the i.MX UART register descriptions from include/asm-arm/arch-imx/imx-regs.h to the serial driver itself. This helps using the driver on other architectures like mx31 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 17:25:24 +0000