| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When enabling the IOC request and polling for controller ready status, poll
for controller fault and reset history bit. If the controller is faulted
or the reset history bit is set, retry the initialization a maximum of
three times (2 retries) or if the cumulative time taken for all retries
exceeds 510 seconds.
Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.12/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
6.12/scsi-queue
There are two functional changes:
smartpqi-add-fw-log-to-kdump
smartpqi-add-counter-for-parity-write-stream-requests
There are three minor bug fixes:
smartpqi-fix-stream-detection
smartpqi-fix-rare-system-hang-during-LUN-reset
smartpqi-fix-volume-size-updates
The other two patches add PCI-IDs for new controllers and change the
driver version.
This set of changes consists of:
* smartpqi-add-fw-log-to-kdump
During a kdump, the driver tells the controller to copy its logging
information to some pre-allocated buffers that can be analyzed
later.
This is a "feature" driven capability and is backward compatible
with existing controller FW.
This patch renames some prefixes for OFA (Online-Firmware Activation
ofa_*) buffers to host_memory_*. So, not a lot of actual functional
changes to smartpqi_init.c, mainly determining the memory size
allocation.
We added a function to notify the controller to copy debug data into
host memory before continuing kdump.
Most of the functional changes are in smartpqi_sis.c where the
actual handshaking is done.
* smartpqi-fix-stream-detection
Correct some false write-stream detections. The data structure used
to check for write-streams was not initialized to all 0's causing
some false write stream detections. The driver sends down streamed
requests to the raid engine instead of using AIO bypass for some
extra performance. (Potential full-stripe write verses Read Modify
Write).
False detections have not caused any data corruption. Found by
internal testing. No known externally reported bugs.
* smartpqi-add-counter-for-parity-write-stream-requests
Adding some counters for raid_bypass and write streams. These two
counters are related because write stream detection is only checked
if an I/O request is eligible for bypass (AIO).
The bypass counter (raid_bypass_cnt) was moved into a common
structure (pqi_raid_io_stats) and changed to type __percpu. The
write stream counter is (write_stream_cnt) has been added to this
same structure.
These counters are __percpu counters for performance. We added a
sysfs entry to show the write stream count. The raid bypass counter
sysfs entry already exists.
Useful for checking streaming writes. The change in the sysfs entry
write_stream_cnt can be checked during AIO eligible write
operations.
* smartpqi-add-new-controller-PCI-IDs
Adding support for new controller HW. No functional changes.
* smartpqi-fix-rare-system-hang-during-LUN-reset
We found a rare race condition that can occur during a LUN reset. We
were not emptying our internal queue completely.
There have been some rare conditions where our internal request
queue has requests for multiple LUNs and a reset comes in for one of
the LUNs. The driver waits for this internal queue to empty. We were
only clearing out the requests for the LUN being reset so the
request queue was never empty causing a hang.
The Fix:
For all requests in our internal request queue:
Complete requests with DID_RESET for queued requests for the
device undergoing a reset.
Complete requests with DID_REQUEUE for all other queued requests.
Found by internal testing. No known externally reported bugs.
* smartpqi-fix-volume-size-updates
The current code only checks for a size change if there is also a
queue depth change. We are separating the check for queue depth and
the size changes.
Found by internal testing. No known bugs were filed.
* smartpqi-update-version-to-2.1.30-031
No functional changes.
Link: https://lore.kernel.org/r/20240827185501.692804-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 2.1.30-031.
Reviewed-by: David Strahan <david.strahan@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-8-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct logical volume size changes by moving the check for a volume rescan
outside of the check for a queue depth change.
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-7-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct a rare case where in a LUN reset occurs on a device and I/O
requests for other devices persist in the driver's internal request queue.
Part of a LUN reset involves waiting for our internal request queue to
empty before proceeding. The internal request queue contains requests not
yet sent down to the controller.
We were clearing the requests queued for the LUN undergoing a reset, but
not all of the queued requests. Causing a hang.
For all requests in our internal request queue:
Complete requests with DID_RESET for queued requests for the device
undergoing a reset.
Complete requests with DID_REQUEUE for all other queued requests.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-6-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
All PCI ID entries in Hex.
Add new cisco pci ids:
VID / DID / SVID / SDID
---- ---- ---- ----
9005 028f 1137 02fe
9005 028f 1137 02ff
9005 028f 1137 0300
Add new h3c pci ids:
VID / DID / SVID / SDID
---- ---- ---- ----
9005 028f 193d 0462
9005 028f 193d 8462
Add new ieit pci ids:
VID / DID / SVID / SDID
---- ---- ---- ----
9005 028f 1ff9 00a3
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <David.Strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-5-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add sysfs entry to check for write stream requests.
Move existing raid_bypass_cnt into a structure named pqi_raid_io_stats and
add member write_stream_cnt. These two counters are related because write
stream detection is only checked if an I/O request is eligible for bypass
(AIO).
Example usage:
lsscsi
[15:1:0:0] disk Adaptec LOGICAL VOLUME 0129 /dev/sdae
cat /sys/block/sdae/device/ssd_smart_path_enabled
1
^
|
+---- NOTE: here bypass has been enabled on device sdae
To read the counter for parity write stream requests:
cat /sys/block/sdae/device/write_stream_cnt
0x60cd507
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Co-developed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct stream detection by initializing the structure
pqi_scsi_dev_raid_map_data to 0s.
When the OS issues SCSI READ commands, the driver erroneously considers
them as SCSI WRITES. If they are identified as sequential IOs, the driver
then submits those requests via the RAID path instead of the AIO path.
The 'is_write' flag might be set for SCSI READ commands also. The driver
may interpret SCSI READ commands as SCSI WRITE commands, resulting in IOs
being submitted through the RAID path.
Note: This does not cause data corruption.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add controller logs to kdump.
Driver allocates DMA memory and communicates this address to FW. In the
event of system crash, host driver notifies the firmware about the crash
and firmware posts all the necessary logs in the pre-allocated host buffer
for firmware debugging.
Once firmware notifies the completion of the log uploading to the host
memory and host continues with the OS crash dump saving.
This is a "feature" driven capability and is backward compatible with
existing controller FW.
Rename some prefixes for OFA (Online-Firmware Activation ofa_*) buffers to
host_memory_*. So, not a lot of actual functional changes to
smartpqi_init.c, mainly determining the memory size allocation.
Added a function to notify the controller to copy debug data into host
memory before continuing kdump.
Most of the functional changes are in smartpqi_sis.c where the actual
handshaking is done.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-2-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some fields are unused in struct bnx2fc_rport. Remove them in order to
save 96 bytes on a x86_64.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/42e20b159f3bbb12da7796463a521ca051bd5274.1724399924.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The 'del_list_entry' field in "struct fc_port" is unused.
The field was introduced in commit 2d70c103fd2a ("[SCSI] qla2xxx: Add LLD
target-mode infrastructure for >= 24xx series") in 2012-05 and the last
user was removed in commit 726b85487067 ("qla2xxx: Add framework for async
fabric discovery") in 2017-02.
Remove this unused field.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69155321ab26c1f4d473d5bb6cd44b59b9b6a020.1724094686.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit cf4e6363859d ("[SCSI] bnx2i: Add bnx2i iSCSI driver.") declared but
never implemented these.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240824084724.3647307-1-yuehaibing@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Multiple SCSI drivers use snprintf() to format a workqueue name before
invoking one of the create*_workqueue() macros. This patch series
simplifies such code by passing the format string and arguments to
alloc_workqueue(). Additionally, the structure members that are only
used as a temporary buffer for formatting workqueue names are
removed. Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20240822195944.654691-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_workqueue() format the workqueue name. Remove the
work_q_name[] member from struct Scsi_Host because it is no longer
used by any SCSI driver nor by the SCSI core.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-19-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-17-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-16-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly. Not setting shost->work_q_name is safe because
there is no code that reads the value set by the removed code.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-15-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-14-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-13-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-12-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of
calling snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The workqueue maintainer wants to remove the create*_workqueue() macros
because these macros always set the WQ_MEM_RECLAIM flag and because these
only support literal workqueue names. Hence this patch that replaces the
create*_workqueue() invocations with the definition of this macro. The
WQ_MEM_RECLAIM flag has been retained because I think that flag is necessary
for workqueues created by storage drivers. This patch has been generated by
running spatch and git clang-format. spatch has been invoked as follows:
spatch --in-place --sp-file expand-create-workqueue.spatch $(git grep -lEw 'create_(freezable_|singlethread_|)workqueue' */scsi */ufs)
The contents of the expand-create-workqueue.spatch file is as follows:
@@
expression name;
@@
-create_workqueue(name)
+alloc_workqueue("%s", WQ_MEM_RECLAIM, 1, name)
@@
expression name;
@@
-create_freezable_workqueue(name)
+alloc_workqueue("%s", WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1, name)
@@
expression name;
@@
-create_singlethread_workqueue(name)
+alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM, name)
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The kref_put() function will call nport->release if the refcount drops to
zero. The nport->release release function is _efc_nport_free() which frees
"nport". But then we dereference "nport" on the next line which is a use
after free. Re-order these lines to avoid the use after free.
Fixes: fcd427303eb9 ("scsi: elx: libefc: SLI and FC PORT state machine interfaces")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b666ab26-6581-4213-9a3d-32a9147f0399@stanley.mountain
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Finn Thain <fthain@linux-m68k.org> says:
This series begins with some work on the mac_scsi driver to improve
compatibility with SCSI2SD v5 devices. Better error handling is needed
there because the PDMA hardware does not tolerate the write latency
spikes which SD cards can produce.
A bug is fixed in the 5380 core driver so that scatter/gather can be
enabled in mac_scsi.
Several patches at the end of this series improve robustness and
correctness in the core driver.
This series has been tested on a variety of mac_scsi hosts. A variety
of SCSI targets was also tested, including Quantum HDD, Fujitsu HDD,
Iomega FDD, Ricoh CD-RW, Matsushita CD-ROM, SCSI2SD and BlueSCSI.
Link: https://lore.kernel.org/r/cover.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Tidy up a few indentation annoyances. No functional change.
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/8541ea096fde9f8716b79e4f0707aed916a8c58d.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This comment should have been removed in commit e7734ef14ead ("scsi:
NCR5380: Remove context check") when the irqs_disabled() conditional was
removed.
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/c54aff198b5a60be8ecfd50df0a9a77850730501.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
NCR5380_transfer_pio() returns an ambiguous value which is ignored by
callers. Make it void and remove the redundant calculation. Adopt
kernel-doc format for the updated description.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/c07a52d0d7610b4b9969d6dd4fc9a62458fe15de.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The 'message' member is stored but never loaded so just remove it.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/4dc903a95a814d0c9b09656f3651a1bd798fcbbb.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve robustness by checking for a lost BSY signal during the information
transfer loop. The status register is being polled anyway, so a BSY check
costs nothing. BSY signal loss could be caused by a target error or a
kicked plug etc. A bus reset is another possibility but that is already
handled and hostdata->connected would be NULL.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/d253dddaf4d9bc17b8ee02ea2b731d92f25b16f1.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Following an incomplete transfer in MSG IN phase, the driver would not
notice the problem and would make use of invalid data. Initialize 'tmp'
appropriately and bail out if no message was received. For STATUS phase,
preserve the existing status code unless a new value was transferred.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/52e02a8812ae1a2d810d7f9f7fd800c3ccc320c4.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that FLAG_DMA_FIXUP has itself been fixed up, it can be used to enable
scatter/gather. Increase the default value for sg_tablesize to SG_ALL for
those systems which are compatible with FLAG_DMA_FIXUP.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/f155ba5ce93055cbc6ac6d4026673f40f826edb8.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
It's not an error for a target to change the bus phase during a transfer.
Unfortunately, the FLAG_DMA_FIXUP workaround does not allow for that -- a
phase change produces a DRQ timeout error and the device borken flag will
be set.
Check the phase match bit during FLAG_DMA_FIXUP processing. Don't forget to
decrement the command residual. While we are here, change shost_printk()
into scmd_printk() for better consistency with other DMA error messages.
Tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 55181be8ced1 ("ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/99dc7d1f4c825621b5b120963a69f6cd3e9ca659.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SD cards can produce write latency spikes on the order of a hundred
milliseconds. If the target firmware does not hide that latency during DATA
IN and OUT phases it can cause the PDMA circuitry to raise a processor bus
fault which in turn leads to an unreliable byte count and a DMA overrun.
The Last Byte Sent flag is used to detect the overrun but this mechanism is
unreliable on some systems. Instead, set a DID_ERROR result whenever there
is a bus fault during a PDMA send, unless the cause was a phase mismatch.
Cc: stable@vger.kernel.org # 5.15+
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 7c1f3e3447a1 ("scsi: mac_scsi: Treat Last Byte Sent time-out as failure")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/cc38df687ace2c4ffc375a683b2502fc476b600d.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Before the error handling can be revised, some preparation is needed.
Refactor the polling loop with a new function, macscsi_wait_for_drq().
This function will gain more call sites in the next patch.
Cc: stable@vger.kernel.org # 5.15+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/6a5ffabb4290c0d138c6d285fda8fa3902e926f0.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After a bus fault, capture and log the chip registers immediately, if the
NDEBUG_PSEUDO_DMA macro is defined. Remove some printk(KERN_DEBUG ...)
messages that aren't needed any more. Don't skip the debug message when
bytes == 0. Show all of the byte counters in the debug messages.
Cc: stable@vger.kernel.org # 5.15+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/7573c79f4e488fc00af2b8a191e257ca945e0409.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 8.10.0.5.50.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240808125418.8832-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of updating the ConsumerIndex of the Admin and Operational
ReplyQueues after processing all replies in the queue, the index will now
be periodically updated after processing every 100 replies.
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240808125418.8832-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver masked the loginfo available bit in the iocstatus before passing
it to the applications, causing a mismatch in error messages between Linux
and other operating systems.
Modify driver to return unmasked (complete) iocstatus, including the
loginfo available bit, for the MPI commands sent through the ioctl
interface.
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240808125418.8832-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In the spirit of [1], fix the copy-paste typo and use unique names for both
caches.
[1]: https://lore.kernel.org/all/20240807090746.2146479-1-pedro.falcato@gmail.com/
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Link: https://lore.kernel.org/r/20240807095709.2200728-1-pedro.falcato@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Flag REQ_ATOMIC can only be set for writes, so don't check if the operation
is also a write in sd_setup_read_write_cmnd().
Fixes: bf4ae8f2e640 ("scsi: sd: Atomic write support")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240805113315.1048591-2-john.g.garry@oracle.com
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.11/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git 6.11/scsi-queue
The functional changes of note to smartpqi are for: multipath failover
and improving the accuracy of our RAID bypass counter.
For multipath we are:
Reverting commit 94a68c814328 ("scsi: smartpqi: Quickly propagate
path failures to SCSI midlayer") because under certain rare
conditions involving encryption-enabled devices, a false path
failure is reported to the SML causing multipath to failover to
the other path.
Improving errors returned from the driver back to the SML by
checking for error codes returned from the firmware and returning
the correct ASC/ASCQ codes to the SML.
The other two patches add PCI-IDs for new controllers and change the
driver version.
Link: https://lore.kernel.org/r/20240711194704.982400-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 2.1.28-025.
Reviewed-by: Mike Tran <mike.tran@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240711194704.982400-6-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve multipath failovers by mapping firmware errors into I/O errors.
In some rare instances, firmware does not return the proper error code for
I/O errors caused by a multipath path failure.
Map I/O errors returned by firmware into errors that help the multipath
layer to detect the failure of a path.
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240711194704.982400-5-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
